contrib/libarchive/libarchive/archive_write_add_filter_bzip2.c

   1 /*-
   2  * Copyright (c) 2003-2007 Tim Kientzle
   3  * Copyright (c) 2012 Michihiro NAKAJIMA
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  *
  15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
  16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  18  * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
  19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  25  */
  26
  27 #include "archive_platform.h"
  28
  29 __FBSDID("$FreeBSD: head/lib/libarchive/archive_write_set_compression_bzip2.c 201091 2009-12-28 02:22:41Z kientzle $");
  30
  31 #ifdef HAVE_ERRNO_H
  32 #include <errno.h>
  33 #endif
  34 #include <stdio.h>
  35 #ifdef HAVE_STDLIB_H
  36 #include <stdlib.h>
  37 #endif
  38 #ifdef HAVE_STRING_H
  39 #include <string.h>
  40 #endif
  41 #ifdef HAVE_BZLIB_H
  42 #include <bzlib.h>
  43 #endif
  44
  45 #include "archive.h"
  46 #include "archive_private.h"
  47 #include "archive_write_private.h"
  48
  49 #if ARCHIVE_VERSION_NUMBER < 4000000
  50 int
  51 archive_write_set_compression_bzip2(struct archive *a)
  52 {
  53         __archive_write_filters_free(a);
  54         return (archive_write_add_filter_bzip2(a));
  55 }
  56 #endif
  57
  58 struct private_data {
  59         int              compression_level;
  60 #if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
  61         bz_stream        stream;
  62         int64_t          total_in;
  63         char            *compressed;
  64         size_t           compressed_buffer_size;
  65 #else
  66         struct archive_write_program_data *pdata;
  67 #endif
  68 };
  69
  70 static int archive_compressor_bzip2_close(struct archive_write_filter *);
  71 static int archive_compressor_bzip2_free(struct archive_write_filter *);
  72 static int archive_compressor_bzip2_open(struct archive_write_filter *);
  73 static int archive_compressor_bzip2_options(struct archive_write_filter *,
  74                     const char *, const char *);
  75 static int archive_compressor_bzip2_write(struct archive_write_filter *,
  76                     const void *, size_t);
  77
  78 /*
  79  * Add a bzip2 compression filter to this write handle.
  80  */
  81 int
  82 archive_write_add_filter_bzip2(struct archive *_a)
  83 {
  84         struct archive_write *a = (struct archive_write *)_a;
  85         struct archive_write_filter *f = __archive_write_allocate_filter(_a);
  86         struct private_data *data;
  87
  88         archive_check_magic(&a->archive, ARCHIVE_WRITE_MAGIC,
  89             ARCHIVE_STATE_NEW, "archive_write_add_filter_bzip2");
  90
  91         data = calloc(1, sizeof(*data));
  92         if (data == NULL) {
  93                 archive_set_error(&a->archive, ENOMEM, "Out of memory");
  94                 return (ARCHIVE_FATAL);
  95         }
  96         data->compression_level = 9; /* default */
  97
  98         f->data = data;
  99         f->options = &archive_compressor_bzip2_options;
 100         f->close = &archive_compressor_bzip2_close;
 101         f->free = &archive_compressor_bzip2_free;
 102         f->open = &archive_compressor_bzip2_open;
 103         f->code = ARCHIVE_FILTER_BZIP2;
 104         f->name = "bzip2";
 105 #if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
 106         return (ARCHIVE_OK);
 107 #else
 108         data->pdata = __archive_write_program_allocate("bzip2");
 109         if (data->pdata == NULL) {
 110                 free(data);
 111                 archive_set_error(&a->archive, ENOMEM, "Out of memory");
 112                 return (ARCHIVE_FATAL);
 113         }
 114         data->compression_level = 0;
 115         archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
 116             "Using external bzip2 program");
 117         return (ARCHIVE_WARN);
 118 #endif
 119 }
 120
 121 /*
 122  * Set write options.
 123  */
 124 static int
 125 archive_compressor_bzip2_options(struct archive_write_filter *f,
 126     const char *key, const char *value)
 127 {
 128         struct private_data *data = (struct private_data *)f->data;
 129
 130         if (strcmp(key, "compression-level") == 0) {
 131                 if (value == NULL || !(value[0] >= '0' && value[0] <= '9') ||
 132                     value[1] != '\0')
 133                         return (ARCHIVE_WARN);
 134                 data->compression_level = value[0] - '0';
 135                 /* Make '0' be a synonym for '1'. */
 136                 /* This way, bzip2 compressor supports the same 0..9
 137                  * range of levels as gzip. */
 138                 if (data->compression_level < 1)
 139                         data->compression_level = 1;
 140                 return (ARCHIVE_OK);
 141         }
 142
 143         /* Note: The "warn" return is just to inform the options
 144          * supervisor that we didn't handle it.  It will generate
 145          * a suitable error if no one used this option. */
 146         return (ARCHIVE_WARN);
 147 }
 148
 149 #if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
 150 /* Don't compile this if we don't have bzlib. */
 151
 152 /*
 153  * Yuck.  bzlib.h is not const-correct, so I need this one bit
 154  * of ugly hackery to convert a const * pointer to a non-const pointer.
 155  */
 156 #define SET_NEXT_IN(st,src)                                     \
 157         (st)->stream.next_in = (char *)(uintptr_t)(const void *)(src)
 158 static int drive_compressor(struct archive_write_filter *,
 159                     struct private_data *, int finishing);
 160
 161 /*
 162  * Setup callback.
 163  */
 164 static int
 165 archive_compressor_bzip2_open(struct archive_write_filter *f)
 166 {
 167         struct private_data *data = (struct private_data *)f->data;
 168         int ret;
 169
 170         ret = __archive_write_open_filter(f->next_filter);
 171         if (ret != 0)
 172                 return (ret);
 173
 174         if (data->compressed == NULL) {
 175                 size_t bs = 65536, bpb;
 176                 if (f->archive->magic == ARCHIVE_WRITE_MAGIC) {
 177                         /* Buffer size should be a multiple number of the of bytes
 178                          * per block for performance. */
 179                         bpb = archive_write_get_bytes_per_block(f->archive);
 180                         if (bpb > bs)
 181                                 bs = bpb;
 182                         else if (bpb != 0)
 183                                 bs -= bs % bpb;
 184                 }
 185                 data->compressed_buffer_size = bs;
 186                 data->compressed
 187                     = (char *)malloc(data->compressed_buffer_size);
 188                 if (data->compressed == NULL) {
 189                         archive_set_error(f->archive, ENOMEM,
 190                             "Can't allocate data for compression buffer");
 191                         return (ARCHIVE_FATAL);
 192                 }
 193         }
 194
 195         memset(&data->stream, 0, sizeof(data->stream));
 196         data->stream.next_out = data->compressed;
 197         data->stream.avail_out = data->compressed_buffer_size;
 198         f->write = archive_compressor_bzip2_write;
 199
 200         /* Initialize compression library */
 201         ret = BZ2_bzCompressInit(&(data->stream),
 202             data->compression_level, 0, 30);
 203         if (ret == BZ_OK) {
 204                 f->data = data;
 205                 return (ARCHIVE_OK);
 206         }
 207
 208         /* Library setup failed: clean up. */
 209         archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
 210             "Internal error initializing compression library");
 211
 212         /* Override the error message if we know what really went wrong. */
 213         switch (ret) {
 214         case BZ_PARAM_ERROR:
 215                 archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
 216                     "Internal error initializing compression library: "
 217                     "invalid setup parameter");
 218                 break;
 219         case BZ_MEM_ERROR:
 220                 archive_set_error(f->archive, ENOMEM,
 221                     "Internal error initializing compression library: "
 222                     "out of memory");
 223                 break;
 224         case BZ_CONFIG_ERROR:
 225                 archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
 226                     "Internal error initializing compression library: "
 227                     "mis-compiled library");
 228                 break;
 229         }
 230
 231         return (ARCHIVE_FATAL);
 232
 233 }
 234
 235 /*
 236  * Write data to the compressed stream.
 237  *
 238  * Returns ARCHIVE_OK if all data written, error otherwise.
 239  */
 240 static int
 241 archive_compressor_bzip2_write(struct archive_write_filter *f,
 242     const void *buff, size_t length)
 243 {
 244         struct private_data *data = (struct private_data *)f->data;
 245
 246         /* Update statistics */
 247         data->total_in += length;
 248
 249         /* Compress input data to output buffer */
 250         SET_NEXT_IN(data, buff);
 251         data->stream.avail_in = length;
 252         if (drive_compressor(f, data, 0))
 253                 return (ARCHIVE_FATAL);
 254         return (ARCHIVE_OK);
 255 }
 256
 257
 258 /*
 259  * Finish the compression.
 260  */
 261 static int
 262 archive_compressor_bzip2_close(struct archive_write_filter *f)
 263 {
 264         struct private_data *data = (struct private_data *)f->data;
 265         int ret, r1;
 266
 267         /* Finish compression cycle. */
 268         ret = drive_compressor(f, data, 1);
 269         if (ret == ARCHIVE_OK) {
 270                 /* Write the last block */
 271                 ret = __archive_write_filter(f->next_filter,
 272                     data->compressed,
 273                     data->compressed_buffer_size - data->stream.avail_out);
 274         }
 275
 276         switch (BZ2_bzCompressEnd(&(data->stream))) {
 277         case BZ_OK:
 278                 break;
 279         default:
 280                 archive_set_error(f->archive, ARCHIVE_ERRNO_PROGRAMMER,
 281                     "Failed to clean up compressor");
 282                 ret = ARCHIVE_FATAL;
 283         }
 284
 285         r1 = __archive_write_close_filter(f->next_filter);
 286         return (r1 < ret ? r1 : ret);
 287 }
 288
 289 static int
 290 archive_compressor_bzip2_free(struct archive_write_filter *f)
 291 {
 292         struct private_data *data = (struct private_data *)f->data;
 293         free(data->compressed);
 294         free(data);
 295         f->data = NULL;
 296         return (ARCHIVE_OK);
 297 }
 298
 299 /*
 300  * Utility function to push input data through compressor, writing
 301  * full output blocks as necessary.
 302  *
 303  * Note that this handles both the regular write case (finishing ==
 304  * false) and the end-of-archive case (finishing == true).
 305  */
 306 static int
 307 drive_compressor(struct archive_write_filter *f,
 308     struct private_data *data, int finishing)
 309 {
 310         int ret;
 311
 312         for (;;) {
 313                 if (data->stream.avail_out == 0) {
 314                         ret = __archive_write_filter(f->next_filter,
 315                             data->compressed,
 316                             data->compressed_buffer_size);
 317                         if (ret != ARCHIVE_OK) {
 318                                 /* TODO: Handle this write failure */
 319                                 return (ARCHIVE_FATAL);
 320                         }
 321                         data->stream.next_out = data->compressed;
 322                         data->stream.avail_out = data->compressed_buffer_size;
 323                 }
 324
 325                 /* If there's nothing to do, we're done. */
 326                 if (!finishing && data->stream.avail_in == 0)
 327                         return (ARCHIVE_OK);
 328
 329                 ret = BZ2_bzCompress(&(data->stream),
 330                     finishing ? BZ_FINISH : BZ_RUN);
 331
 332                 switch (ret) {
 333                 case BZ_RUN_OK:
 334                         /* In non-finishing case, did compressor
 335                          * consume everything? */
 336                         if (!finishing && data->stream.avail_in == 0)
 337                                 return (ARCHIVE_OK);
 338                         break;
 339                 case BZ_FINISH_OK:  /* Finishing: There's more work to do */
 340                         break;
 341                 case BZ_STREAM_END: /* Finishing: all done */
 342                         /* Only occurs in finishing case */
 343                         return (ARCHIVE_OK);
 344                 default:
 345                         /* Any other return value indicates an error */
 346                         archive_set_error(f->archive,
 347                             ARCHIVE_ERRNO_PROGRAMMER,
 348                             "Bzip2 compression failed;"
 349                             " BZ2_bzCompress() returned %d",
 350                             ret);
 351                         return (ARCHIVE_FATAL);
 352                 }
 353         }
 354 }
 355
 356 #else /* HAVE_BZLIB_H && BZ_CONFIG_ERROR */
 357
 358 static int
 359 archive_compressor_bzip2_open(struct archive_write_filter *f)
 360 {
 361         struct private_data *data = (struct private_data *)f->data;
 362         struct archive_string as;
 363         int r;
 364
 365         archive_string_init(&as);
 366         archive_strcpy(&as, "bzip2");
 367
 368         /* Specify compression level. */
 369         if (data->compression_level > 0) {
 370                 archive_strcat(&as, " -");
 371                 archive_strappend_char(&as, '0' + data->compression_level);
 372         }
 373         f->write = archive_compressor_bzip2_write;
 374
 375         r = __archive_write_program_open(f, data->pdata, as.s);
 376         archive_string_free(&as);
 377         return (r);
 378 }
 379
 380 static int
 381 archive_compressor_bzip2_write(struct archive_write_filter *f, const void *buff,
 382     size_t length)
 383 {
 384         struct private_data *data = (struct private_data *)f->data;
 385
 386         return __archive_write_program_write(f, data->pdata, buff, length);
 387 }
 388
 389 static int
 390 archive_compressor_bzip2_close(struct archive_write_filter *f)
 391 {
 392         struct private_data *data = (struct private_data *)f->data;
 393
 394         return __archive_write_program_close(f, data->pdata);
 395 }
 396
 397 static int
 398 archive_compressor_bzip2_free(struct archive_write_filter *f)
 399 {
 400         struct private_data *data = (struct private_data *)f->data;
 401
 402         __archive_write_program_free(data->pdata);
 403         free(data);
 404         return (ARCHIVE_OK);
 405 }
 406
 407 #endif /* HAVE_BZLIB_H && BZ_CONFIG_ERROR */