/******************************************************************************* * * Module Name: rscalc - Calculate stream and list lengths * ******************************************************************************/ /* * Copyright (C) 2000 - 2013, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #define __RSCALC_C__ #include #include #include #include #define _COMPONENT ACPI_RESOURCES ACPI_MODULE_NAME ("rscalc") /* Local prototypes */ static UINT8 AcpiRsCountSetBits ( UINT16 BitField); static ACPI_RS_LENGTH AcpiRsStructOptionLength ( ACPI_RESOURCE_SOURCE *ResourceSource); static UINT32 AcpiRsStreamOptionLength ( UINT32 ResourceLength, UINT32 MinimumTotalLength); /******************************************************************************* * * FUNCTION: AcpiRsCountSetBits * * PARAMETERS: BitField - Field in which to count bits * * RETURN: Number of bits set within the field * * DESCRIPTION: Count the number of bits set in a resource field. Used for * (Short descriptor) interrupt and DMA lists. * ******************************************************************************/ static UINT8 AcpiRsCountSetBits ( UINT16 BitField) { UINT8 BitsSet; ACPI_FUNCTION_ENTRY (); for (BitsSet = 0; BitField; BitsSet++) { /* Zero the least significant bit that is set */ BitField &= (UINT16) (BitField - 1); } return (BitsSet); } /******************************************************************************* * * FUNCTION: AcpiRsStructOptionLength * * PARAMETERS: ResourceSource - Pointer to optional descriptor field * * RETURN: Status * * DESCRIPTION: Common code to handle optional ResourceSourceIndex and * ResourceSource fields in some Large descriptors. Used during * list-to-stream conversion * ******************************************************************************/ static ACPI_RS_LENGTH AcpiRsStructOptionLength ( ACPI_RESOURCE_SOURCE *ResourceSource) { ACPI_FUNCTION_ENTRY (); /* * If the ResourceSource string is valid, return the size of the string * (StringLength includes the NULL terminator) plus the size of the * ResourceSourceIndex (1). */ if (ResourceSource->StringPtr) { return ((ACPI_RS_LENGTH) (ResourceSource->StringLength + 1)); } return (0); } /******************************************************************************* * * FUNCTION: AcpiRsStreamOptionLength * * PARAMETERS: ResourceLength - Length from the resource header * MinimumTotalLength - Minimum length of this resource, before * any optional fields. Includes header size * * RETURN: Length of optional string (0 if no string present) * * DESCRIPTION: Common code to handle optional ResourceSourceIndex and * ResourceSource fields in some Large descriptors. Used during * stream-to-list conversion * ******************************************************************************/ static UINT32 AcpiRsStreamOptionLength ( UINT32 ResourceLength, UINT32 MinimumAmlResourceLength) { UINT32 StringLength = 0; ACPI_FUNCTION_ENTRY (); /* * The ResourceSourceIndex and ResourceSource are optional elements of some * Large-type resource descriptors. */ /* * If the length of the actual resource descriptor is greater than the ACPI * spec-defined minimum length, it means that a ResourceSourceIndex exists * and is followed by a (required) null terminated string. The string length * (including the null terminator) is the resource length minus the minimum * length, minus one byte for the ResourceSourceIndex itself. */ if (ResourceLength > MinimumAmlResourceLength) { /* Compute the length of the optional string */ StringLength = ResourceLength - MinimumAmlResourceLength - 1; } /* * Round the length up to a multiple of the native word in order to * guarantee that the entire resource descriptor is native word aligned */ return ((UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (StringLength)); } /******************************************************************************* * * FUNCTION: AcpiRsGetAmlLength * * PARAMETERS: Resource - Pointer to the resource linked list * SizeNeeded - Where the required size is returned * * RETURN: Status * * DESCRIPTION: Takes a linked list of internal resource descriptors and * calculates the size buffer needed to hold the corresponding * external resource byte stream. * ******************************************************************************/ ACPI_STATUS AcpiRsGetAmlLength ( ACPI_RESOURCE *Resource, ACPI_SIZE *SizeNeeded) { ACPI_SIZE AmlSizeNeeded = 0; ACPI_RS_LENGTH TotalSize; ACPI_FUNCTION_TRACE (RsGetAmlLength); /* Traverse entire list of internal resource descriptors */ while (Resource) { /* Validate the descriptor type */ if (Resource->Type > ACPI_RESOURCE_TYPE_MAX) { return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE); } /* Sanity check the length. It must not be zero, or we loop forever */ if (!Resource->Length) { return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH); } /* Get the base size of the (external stream) resource descriptor */ TotalSize = AcpiGbl_AmlResourceSizes [Resource->Type]; /* * Augment the base size for descriptors with optional and/or * variable-length fields */ switch (Resource->Type) { case ACPI_RESOURCE_TYPE_IRQ: /* Length can be 3 or 2 */ if (Resource->Data.Irq.DescriptorLength == 2) { TotalSize--; } break; case ACPI_RESOURCE_TYPE_START_DEPENDENT: /* Length can be 1 or 0 */ if (Resource->Data.Irq.DescriptorLength == 0) { TotalSize--; } break; case ACPI_RESOURCE_TYPE_VENDOR: /* * Vendor Defined Resource: * For a Vendor Specific resource, if the Length is between 1 and 7 * it will be created as a Small Resource data type, otherwise it * is a Large Resource data type. */ if (Resource->Data.Vendor.ByteLength > 7) { /* Base size of a Large resource descriptor */ TotalSize = sizeof (AML_RESOURCE_LARGE_HEADER); } /* Add the size of the vendor-specific data */ TotalSize = (ACPI_RS_LENGTH) (TotalSize + Resource->Data.Vendor.ByteLength); break; case ACPI_RESOURCE_TYPE_END_TAG: /* * End Tag: * We are done -- return the accumulated total size. */ *SizeNeeded = AmlSizeNeeded + TotalSize; /* Normal exit */ return_ACPI_STATUS (AE_OK); case ACPI_RESOURCE_TYPE_ADDRESS16: /* * 16-Bit Address Resource: * Add the size of the optional ResourceSource info */ TotalSize = (ACPI_RS_LENGTH) (TotalSize + AcpiRsStructOptionLength ( &Resource->Data.Address16.ResourceSource)); break; case ACPI_RESOURCE_TYPE_ADDRESS32: /* * 32-Bit Address Resource: * Add the size of the optional ResourceSource info */ TotalSize = (ACPI_RS_LENGTH) (TotalSize + AcpiRsStructOptionLength ( &Resource->Data.Address32.ResourceSource)); break; case ACPI_RESOURCE_TYPE_ADDRESS64: /* * 64-Bit Address Resource: * Add the size of the optional ResourceSource info */ TotalSize = (ACPI_RS_LENGTH) (TotalSize + AcpiRsStructOptionLength ( &Resource->Data.Address64.ResourceSource)); break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: /* * Extended IRQ Resource: * Add the size of each additional optional interrupt beyond the * required 1 (4 bytes for each UINT32 interrupt number) */ TotalSize = (ACPI_RS_LENGTH) (TotalSize + ((Resource->Data.ExtendedIrq.InterruptCount - 1) * 4) + /* Add the size of the optional ResourceSource info */ AcpiRsStructOptionLength ( &Resource->Data.ExtendedIrq.ResourceSource)); break; case ACPI_RESOURCE_TYPE_GPIO: TotalSize = (ACPI_RS_LENGTH) (TotalSize + (Resource->Data.Gpio.PinTableLength * 2) + Resource->Data.Gpio.ResourceSource.StringLength + Resource->Data.Gpio.VendorLength); break; case ACPI_RESOURCE_TYPE_SERIAL_BUS: TotalSize = AcpiGbl_AmlResourceSerialBusSizes [Resource->Data.CommonSerialBus.Type]; TotalSize = (ACPI_RS_LENGTH) (TotalSize + Resource->Data.I2cSerialBus.ResourceSource.StringLength + Resource->Data.I2cSerialBus.VendorLength); break; default: break; } /* Update the total */ AmlSizeNeeded += TotalSize; /* Point to the next object */ Resource = ACPI_ADD_PTR (ACPI_RESOURCE, Resource, Resource->Length); } /* Did not find an EndTag resource descriptor */ return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG); } /******************************************************************************* * * FUNCTION: AcpiRsGetListLength * * PARAMETERS: AmlBuffer - Pointer to the resource byte stream * AmlBufferLength - Size of AmlBuffer * SizeNeeded - Where the size needed is returned * * RETURN: Status * * DESCRIPTION: Takes an external resource byte stream and calculates the size * buffer needed to hold the corresponding internal resource * descriptor linked list. * ******************************************************************************/ ACPI_STATUS AcpiRsGetListLength ( UINT8 *AmlBuffer, UINT32 AmlBufferLength, ACPI_SIZE *SizeNeeded) { ACPI_STATUS Status; UINT8 *EndAml; UINT8 *Buffer; UINT32 BufferSize; UINT16 Temp16; UINT16 ResourceLength; UINT32 ExtraStructBytes; UINT8 ResourceIndex; UINT8 MinimumAmlResourceLength; AML_RESOURCE *AmlResource; ACPI_FUNCTION_TRACE (RsGetListLength); *SizeNeeded = ACPI_RS_SIZE_MIN; /* Minimum size is one EndTag */ EndAml = AmlBuffer + AmlBufferLength; /* Walk the list of AML resource descriptors */ while (AmlBuffer < EndAml) { /* Validate the Resource Type and Resource Length */ Status = AcpiUtValidateResource (NULL, AmlBuffer, &ResourceIndex); if (ACPI_FAILURE (Status)) { /* * Exit on failure. Cannot continue because the descriptor length * may be bogus also. */ return_ACPI_STATUS (Status); } AmlResource = (void *) AmlBuffer; /* Get the resource length and base (minimum) AML size */ ResourceLength = AcpiUtGetResourceLength (AmlBuffer); MinimumAmlResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex]; /* * Augment the size for descriptors with optional * and/or variable length fields */ ExtraStructBytes = 0; Buffer = AmlBuffer + AcpiUtGetResourceHeaderLength (AmlBuffer); switch (AcpiUtGetResourceType (AmlBuffer)) { case ACPI_RESOURCE_NAME_IRQ: /* * IRQ Resource: * Get the number of bits set in the 16-bit IRQ mask */ ACPI_MOVE_16_TO_16 (&Temp16, Buffer); ExtraStructBytes = AcpiRsCountSetBits (Temp16); break; case ACPI_RESOURCE_NAME_DMA: /* * DMA Resource: * Get the number of bits set in the 8-bit DMA mask */ ExtraStructBytes = AcpiRsCountSetBits (*Buffer); break; case ACPI_RESOURCE_NAME_VENDOR_SMALL: case ACPI_RESOURCE_NAME_VENDOR_LARGE: /* * Vendor Resource: * Get the number of vendor data bytes */ ExtraStructBytes = ResourceLength; /* * There is already one byte included in the minimum * descriptor size. If there are extra struct bytes, * subtract one from the count. */ if (ExtraStructBytes) { ExtraStructBytes--; } break; case ACPI_RESOURCE_NAME_END_TAG: /* * End Tag: This is the normal exit */ return_ACPI_STATUS (AE_OK); case ACPI_RESOURCE_NAME_ADDRESS32: case ACPI_RESOURCE_NAME_ADDRESS16: case ACPI_RESOURCE_NAME_ADDRESS64: /* * Address Resource: * Add the size of the optional ResourceSource */ ExtraStructBytes = AcpiRsStreamOptionLength ( ResourceLength, MinimumAmlResourceLength); break; case ACPI_RESOURCE_NAME_EXTENDED_IRQ: /* * Extended IRQ Resource: * Using the InterruptTableLength, add 4 bytes for each additional * interrupt. Note: at least one interrupt is required and is * included in the minimum descriptor size (reason for the -1) */ ExtraStructBytes = (Buffer[1] - 1) * sizeof (UINT32); /* Add the size of the optional ResourceSource */ ExtraStructBytes += AcpiRsStreamOptionLength ( ResourceLength - ExtraStructBytes, MinimumAmlResourceLength); break; case ACPI_RESOURCE_NAME_GPIO: /* Vendor data is optional */ if (AmlResource->Gpio.VendorLength) { ExtraStructBytes += AmlResource->Gpio.VendorOffset - AmlResource->Gpio.PinTableOffset + AmlResource->Gpio.VendorLength; } else { ExtraStructBytes += AmlResource->LargeHeader.ResourceLength + sizeof (AML_RESOURCE_LARGE_HEADER) - AmlResource->Gpio.PinTableOffset; } break; case ACPI_RESOURCE_NAME_SERIAL_BUS: MinimumAmlResourceLength = AcpiGbl_ResourceAmlSerialBusSizes[ AmlResource->CommonSerialBus.Type]; ExtraStructBytes += AmlResource->CommonSerialBus.ResourceLength - MinimumAmlResourceLength; break; default: break; } /* * Update the required buffer size for the internal descriptor structs * * Important: Round the size up for the appropriate alignment. This * is a requirement on IA64. */ if (AcpiUtGetResourceType (AmlBuffer) == ACPI_RESOURCE_NAME_SERIAL_BUS) { BufferSize = AcpiGbl_ResourceStructSerialBusSizes[ AmlResource->CommonSerialBus.Type] + ExtraStructBytes; } else { BufferSize = AcpiGbl_ResourceStructSizes[ResourceIndex] + ExtraStructBytes; } BufferSize = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (BufferSize); *SizeNeeded += BufferSize; ACPI_DEBUG_PRINT ((ACPI_DB_RESOURCES, "Type %.2X, AmlLength %.2X InternalLength %.2X\n", AcpiUtGetResourceType (AmlBuffer), AcpiUtGetDescriptorLength (AmlBuffer), BufferSize)); /* * Point to the next resource within the AML stream using the length * contained in the resource descriptor header */ AmlBuffer += AcpiUtGetDescriptorLength (AmlBuffer); } /* Did not find an EndTag resource descriptor */ return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG); } /******************************************************************************* * * FUNCTION: AcpiRsGetPciRoutingTableLength * * PARAMETERS: PackageObject - Pointer to the package object * BufferSizeNeeded - UINT32 pointer of the size buffer * needed to properly return the * parsed data * * RETURN: Status * * DESCRIPTION: Given a package representing a PCI routing table, this * calculates the size of the corresponding linked list of * descriptions. * ******************************************************************************/ ACPI_STATUS AcpiRsGetPciRoutingTableLength ( ACPI_OPERAND_OBJECT *PackageObject, ACPI_SIZE *BufferSizeNeeded) { UINT32 NumberOfElements; ACPI_SIZE TempSizeNeeded = 0; ACPI_OPERAND_OBJECT **TopObjectList; UINT32 Index; ACPI_OPERAND_OBJECT *PackageElement; ACPI_OPERAND_OBJECT **SubObjectList; BOOLEAN NameFound; UINT32 TableIndex; ACPI_FUNCTION_TRACE (RsGetPciRoutingTableLength); NumberOfElements = PackageObject->Package.Count; /* * Calculate the size of the return buffer. * The base size is the number of elements * the sizes of the * structures. Additional space for the strings is added below. * The minus one is to subtract the size of the UINT8 Source[1] * member because it is added below. * * But each PRT_ENTRY structure has a pointer to a string and * the size of that string must be found. */ TopObjectList = PackageObject->Package.Elements; for (Index = 0; Index < NumberOfElements; Index++) { /* Dereference the sub-package */ PackageElement = *TopObjectList; /* We must have a valid Package object */ if (!PackageElement || (PackageElement->Common.Type != ACPI_TYPE_PACKAGE)) { return_ACPI_STATUS (AE_AML_OPERAND_TYPE); } /* * The SubObjectList will now point to an array of the * four IRQ elements: Address, Pin, Source and SourceIndex */ SubObjectList = PackageElement->Package.Elements; /* Scan the IrqTableElements for the Source Name String */ NameFound = FALSE; for (TableIndex = 0; TableIndex < PackageElement->Package.Count && !NameFound; TableIndex++) { if (*SubObjectList && /* Null object allowed */ ((ACPI_TYPE_STRING == (*SubObjectList)->Common.Type) || ((ACPI_TYPE_LOCAL_REFERENCE == (*SubObjectList)->Common.Type) && ((*SubObjectList)->Reference.Class == ACPI_REFCLASS_NAME)))) { NameFound = TRUE; } else { /* Look at the next element */ SubObjectList++; } } TempSizeNeeded += (sizeof (ACPI_PCI_ROUTING_TABLE) - 4); /* Was a String type found? */ if (NameFound) { if ((*SubObjectList)->Common.Type == ACPI_TYPE_STRING) { /* * The length String.Length field does not include the * terminating NULL, add 1 */ TempSizeNeeded += ((ACPI_SIZE) (*SubObjectList)->String.Length + 1); } else { TempSizeNeeded += AcpiNsGetPathnameLength ( (*SubObjectList)->Reference.Node); } } else { /* * If no name was found, then this is a NULL, which is * translated as a UINT32 zero. */ TempSizeNeeded += sizeof (UINT32); } /* Round up the size since each element must be aligned */ TempSizeNeeded = ACPI_ROUND_UP_TO_64BIT (TempSizeNeeded); /* Point to the next ACPI_OPERAND_OBJECT */ TopObjectList++; } /* * Add an extra element to the end of the list, essentially a * NULL terminator */ *BufferSizeNeeded = TempSizeNeeded + sizeof (ACPI_PCI_ROUTING_TABLE); return_ACPI_STATUS (AE_OK); }