/*- * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _SCIC_SGPIO_H_ #define _SCIC_SGPIO_H_ /** * @file * * @brief This file contains all of the interface methods that can be called * by an SCI user on an Serialized General Purpose IO (SGPIO) object. */ #ifdef __cplusplus extern "C" { #endif // __cplusplus #include //Programmable Blink Pattern Durations #define SGPIO_BLINK_DURATION_125 0x0 #define SGPIO_BLINK_DURATION_250 0x1 #define SGPIO_BLINK_DURATION_375 0x2 #define SGPIO_BLINK_DURATION_500 0x3 #define SGPIO_BLINK_DURATION_625 0x4 #define SGPIO_BLINK_DURATION_750 0x5 #define SGPIO_BLINK_DURATION_875 0x6 #define SGPIO_BLINK_DURATION_1000 0x7 #define SGPIO_BLINK_DURATION_1250 0x8 #define SGPIO_BLINK_DURATION_1375 0x9 #define SGPIO_BLINK_DURATION_1500 0xA #define SGPIO_BLINK_DURATION_1625 0xB #define SGPIO_BLINK_DURATION_1750 0xC #define SGPIO_BLINK_DURATION_1875 0xD #define SGPIO_BLINK_DURATION_2000 0xF #define ENABLE_SGPIO_FUNCTIONALITY 1 #define DISABLE_SGPIO_FUNCTIONALITY 0 #define SGPIO_HARDWARE_CONTROL 0x00000443 #define SGPIO_SOFTWARE_CONTROL 0x00000444 #define PHY_0_MASK 0x01 #define PHY_1_MASK 0x02 #define PHY_2_MASK 0x04 #define PHY_3_MASK 0x08 #define SGODSR_INVERT_BIT 0x4 #define SGODSR_ERROR_LED_SHIFT 8 #define SGODSR_LOCATE_LED_SHIFT 4 #define SGODSR_ACTIVITY_LED_SHIFT 0 #define SGPIO_BLINK_PATTERN_A 0x1 #define SGPIO_BLINK_PATTERN_B 0x2 /** * @brief This will set the vendor specific code in the SGPIO Vendor Specific Code * register that is sent on the sLoad wire at the start of each * bit stream. * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @param]in] vendor_specific_sequence - Vendor specific sequence set in the * SGVSCR register. * */ void scic_sgpio_set_vendor_code( SCI_CONTROLLER_HANDLE_T controller, U8 vendor_specific_sequence ); /** * @brief Use this to set both programmable blink patterns A & B in the * SGPBR(Programmable Blink Register). Will set identical patterns * on both SGPIO units. * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @param[in] pattern_a_high - High(LED on) duration time for pattern A * @param[in] pattern_a_low - Low(LED off) duration time for pattern A * @param[in] pattern_b_high - High(LED on) duration time for pattern B * @param[in] pattern_b_low - Low(LED off) duration time for pattern B * */ void scic_sgpio_set_blink_patterns( SCI_CONTROLLER_HANDLE_T controller, U8 pattern_a_low, U8 pattern_a_high, U8 pattern_b_low, U8 pattern_b_high ); /** * @brief This will set the functionality enable bit in the SGPIO interface * control register, when set the bus pins will be used for SGPIO * signaling, if not the bus pins are used for direct led control. * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @param[in] BOOL sgpio_mode - indication for SGPIO signaling. * */ void scic_sgpio_set_functionality( SCI_CONTROLLER_HANDLE_T controller, BOOL sgpio_mode ); /** * @brief Communicates with hardware to set the blink pattern * of the error, locate, and activity LED's for phys * specified by the phy_mask parameter. * Function intend to be used to LEDs management * in non-inteligent backplanes. * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @param[in] phy_mask - This field is a bit mask that specifies the phys * to be updated. * @param[in] error - If TRUE, apply pattern for the error LED * @param[in] locate - If TRUE, apply pattern for the locate LED * @param[in] activity - If TRUE, apply pattern for the activity LED * @param[in] pattern_selection - One of two patterns (A or B). * "A" and "B" patterns should be previously defined * by scic_sgpio_set_blink_patterns() * * @return none */ void scic_sgpio_apply_led_blink_pattern( SCI_CONTROLLER_HANDLE_T controller, U32 phy_mask, BOOL error, BOOL locate, BOOL activity, U8 pattern_selection ); /** * @brief Communicates with hardware to set the blink pattern * of the error, locate, and activity LED's for all * phys in the port. Function intend to be used to LEDs * management in non-inteligent backplanes. * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @param[in] port_handle - port handle is used to identify SGPIO bay * @param[in] error - If TRUE, apply pattern for the error LED * @param[in] locate - If TRUE, apply pattern for the locate LED * @param[in] activity - If TRUE, apply pattern for the activity LED * @param[in] pattern_selection - One of two patterns (A or B). * "A" and "B" patterns should be previously defined * by scic_sgpio_set_blink_patterns() * * @return none */ void scic_sgpio_set_led_blink_pattern( SCI_CONTROLLER_HANDLE_T controller, SCI_PORT_HANDLE_T port_handle, BOOL error, BOOL locate, BOOL activity, U8 pattern_selection ); /** * @brief Communicates with hardware to set the state of the error, locate, * and activity LED's. * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @param[in] phy_mask - This field is a bit mask that specifies the phys * to be updated. * @param[in] error - State to be set for the error LED * @param[in] locate - State to be set for the locate LED * @param[in] activity - State to be set for the activity LED * * @return none */ void scic_sgpio_update_led_state( SCI_CONTROLLER_HANDLE_T controller, U32 phy_mask, BOOL error, BOOL locate, BOOL activity ); /** * @brief Communicates with hardware to set the state of the error, locate, * and activity LED's for all phys in the port. * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @param[in] port_handle - port handle is used to identify SGPIO bay * @param[in] error - State to be set for the error LED * @param[in] locate - State to be set for the locate LED * @param[in] activity - State to be set for the activity LED * * @return none */ void scic_sgpio_set_led_state( SCI_CONTROLLER_HANDLE_T controller, SCI_PORT_HANDLE_T port_handle, BOOL error, BOOL locate, BOOL activity ); /** * @brief This will set all Activity LED's to hardware controlled * * @param[in] BOOL is_hardware_controlled - indication for the Activity LED's * to be hardware controlled or driver controlled. * @return none */ void scic_sgpio_set_to_hardware_control( SCI_CONTROLLER_HANDLE_T controller, BOOL is_hardware_controlled ); /** * @brief Reads and returns the data-in from the SGPIO port for the specified controller. * Bits 00:02 - Drive 0 input data * Bits 04:06 - Drive 1 input data * Bits 08:10 - Drive 2 input data * Bits 12:14 - Drive 3 input data * * @param[in] SCI_CONTROLLER_HANDLE_T controller * @return U32 - Value read from SGPIO, 0xffffffff indicates hardware not readable */ U32 scic_sgpio_read( SCI_CONTROLLER_HANDLE_T controller ); /** * @brief Initializes the SCU for Hardware SGPIO LED control. * * @param[in] SCI_CONTROLLER_HANDLE_T controller */ void scic_sgpio_hardware_initialize( SCI_CONTROLLER_HANDLE_T controller ); /** * @brief Initializes the SCU for Software SGPIO signaling of LED control. * * @param[in] SCI_CONTROLLER_HANDLE_T controller */ void scic_sgpio_initialize( SCI_CONTROLLER_HANDLE_T controller ); #ifdef __cplusplus } #endif // __cplusplus #endif // _SCIC_SGPIO_H_