/*- * Copyright (c) 2011 NetApp, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "bhyverun.h" #include "pci_emul.h" #include "virtio.h" #include "block_if.h" #define VTBLK_RINGSZ 64 #define VTBLK_S_OK 0 #define VTBLK_S_IOERR 1 #define VTBLK_S_UNSUPP 2 #define VTBLK_BLK_ID_BYTES 20 /* Capability bits */ #define VTBLK_F_SEG_MAX (1 << 2) /* Maximum request segments */ #define VTBLK_F_BLK_SIZE (1 << 6) /* cfg block size valid */ #define VTBLK_F_FLUSH (1 << 9) /* Cache flush support */ #define VTBLK_F_TOPOLOGY (1 << 10) /* Optimal I/O alignment */ /* * Host capabilities */ #define VTBLK_S_HOSTCAPS \ ( VTBLK_F_SEG_MAX | \ VTBLK_F_BLK_SIZE | \ VTBLK_F_FLUSH | \ VTBLK_F_TOPOLOGY | \ VIRTIO_RING_F_INDIRECT_DESC ) /* indirect descriptors */ /* * Config space "registers" */ struct vtblk_config { uint64_t vbc_capacity; uint32_t vbc_size_max; uint32_t vbc_seg_max; struct { uint16_t cylinders; uint8_t heads; uint8_t sectors; } vbc_geometry; uint32_t vbc_blk_size; struct { uint8_t physical_block_exp; uint8_t alignment_offset; uint16_t min_io_size; uint32_t opt_io_size; } vbc_topology; uint8_t vbc_writeback; } __packed; /* * Fixed-size block header */ struct virtio_blk_hdr { #define VBH_OP_READ 0 #define VBH_OP_WRITE 1 #define VBH_OP_FLUSH 4 #define VBH_OP_FLUSH_OUT 5 #define VBH_OP_IDENT 8 #define VBH_FLAG_BARRIER 0x80000000 /* OR'ed into vbh_type */ uint32_t vbh_type; uint32_t vbh_ioprio; uint64_t vbh_sector; } __packed; /* * Debug printf */ static int pci_vtblk_debug; #define DPRINTF(params) if (pci_vtblk_debug) printf params #define WPRINTF(params) printf params struct pci_vtblk_ioreq { struct blockif_req io_req; struct pci_vtblk_softc *io_sc; uint8_t *io_status; uint16_t io_idx; }; /* * Per-device softc */ struct pci_vtblk_softc { struct virtio_softc vbsc_vs; pthread_mutex_t vsc_mtx; struct vqueue_info vbsc_vq; struct vtblk_config vbsc_cfg; struct blockif_ctxt *bc; char vbsc_ident[VTBLK_BLK_ID_BYTES]; struct pci_vtblk_ioreq vbsc_ios[VTBLK_RINGSZ]; }; static void pci_vtblk_reset(void *); static void pci_vtblk_notify(void *, struct vqueue_info *); static int pci_vtblk_cfgread(void *, int, int, uint32_t *); static int pci_vtblk_cfgwrite(void *, int, int, uint32_t); static struct virtio_consts vtblk_vi_consts = { "vtblk", /* our name */ 1, /* we support 1 virtqueue */ sizeof(struct vtblk_config), /* config reg size */ pci_vtblk_reset, /* reset */ pci_vtblk_notify, /* device-wide qnotify */ pci_vtblk_cfgread, /* read PCI config */ pci_vtblk_cfgwrite, /* write PCI config */ NULL, /* apply negotiated features */ VTBLK_S_HOSTCAPS, /* our capabilities */ }; static void pci_vtblk_reset(void *vsc) { struct pci_vtblk_softc *sc = vsc; DPRINTF(("vtblk: device reset requested !\n")); vi_reset_dev(&sc->vbsc_vs); } static void pci_vtblk_done(struct blockif_req *br, int err) { struct pci_vtblk_ioreq *io = br->br_param; struct pci_vtblk_softc *sc = io->io_sc; /* convert errno into a virtio block error return */ if (err == EOPNOTSUPP || err == ENOSYS) *io->io_status = VTBLK_S_UNSUPP; else if (err != 0) *io->io_status = VTBLK_S_IOERR; else *io->io_status = VTBLK_S_OK; /* * Return the descriptor back to the host. * We wrote 1 byte (our status) to host. */ pthread_mutex_lock(&sc->vsc_mtx); vq_relchain(&sc->vbsc_vq, io->io_idx, 1); vq_endchains(&sc->vbsc_vq, 0); pthread_mutex_unlock(&sc->vsc_mtx); } static void pci_vtblk_proc(struct pci_vtblk_softc *sc, struct vqueue_info *vq) { struct virtio_blk_hdr *vbh; struct pci_vtblk_ioreq *io; int i, n; int err; ssize_t iolen; int writeop, type; off_t offset; struct iovec iov[BLOCKIF_IOV_MAX + 2]; uint16_t idx, flags[BLOCKIF_IOV_MAX + 2]; n = vq_getchain(vq, &idx, iov, BLOCKIF_IOV_MAX + 2, flags); /* * The first descriptor will be the read-only fixed header, * and the last is for status (hence +2 above and below). * The remaining iov's are the actual data I/O vectors. * * XXX - note - this fails on crash dump, which does a * VIRTIO_BLK_T_FLUSH with a zero transfer length */ assert(n >= 2 && n <= BLOCKIF_IOV_MAX + 2); io = &sc->vbsc_ios[idx]; assert((flags[0] & VRING_DESC_F_WRITE) == 0); assert(iov[0].iov_len == sizeof(struct virtio_blk_hdr)); vbh = iov[0].iov_base; memcpy(&io->io_req.br_iov, &iov[1], sizeof(struct iovec) * (n - 2)); io->io_req.br_iovcnt = n - 2; io->io_req.br_offset = vbh->vbh_sector * DEV_BSIZE; io->io_status = iov[--n].iov_base; assert(iov[n].iov_len == 1); assert(flags[n] & VRING_DESC_F_WRITE); /* * XXX * The guest should not be setting the BARRIER flag because * we don't advertise the capability. */ type = vbh->vbh_type & ~VBH_FLAG_BARRIER; writeop = (type == VBH_OP_WRITE); iolen = 0; for (i = 1; i < n; i++) { /* * - write op implies read-only descriptor, * - read/ident op implies write-only descriptor, * therefore test the inverse of the descriptor bit * to the op. */ assert(((flags[i] & VRING_DESC_F_WRITE) == 0) == writeop); iolen += iov[i].iov_len; } io->io_req.br_resid = iolen; DPRINTF(("virtio-block: %s op, %zd bytes, %d segs, offset %ld\n\r", writeop ? "write" : "read/ident", iolen, i - 1, offset)); switch (type) { case VBH_OP_READ: err = blockif_read(sc->bc, &io->io_req); break; case VBH_OP_WRITE: err = blockif_write(sc->bc, &io->io_req); break; case VBH_OP_FLUSH: case VBH_OP_FLUSH_OUT: err = blockif_flush(sc->bc, &io->io_req); break; case VBH_OP_IDENT: /* Assume a single buffer */ /* S/n equal to buffer is not zero-terminated. */ memset(iov[1].iov_base, 0, iov[1].iov_len); strncpy(iov[1].iov_base, sc->vbsc_ident, MIN(iov[1].iov_len, sizeof(sc->vbsc_ident))); pci_vtblk_done(&io->io_req, 0); return; default: pci_vtblk_done(&io->io_req, EOPNOTSUPP); return; } assert(err == 0); } static void pci_vtblk_notify(void *vsc, struct vqueue_info *vq) { struct pci_vtblk_softc *sc = vsc; while (vq_has_descs(vq)) pci_vtblk_proc(sc, vq); } static int pci_vtblk_init(struct vmctx *ctx, struct pci_devinst *pi, char *opts) { char bident[sizeof("XX:X:X")]; struct blockif_ctxt *bctxt; MD5_CTX mdctx; u_char digest[16]; struct pci_vtblk_softc *sc; off_t size; int i, sectsz, sts, sto; if (opts == NULL) { printf("virtio-block: backing device required\n"); return (1); } /* * The supplied backing file has to exist */ snprintf(bident, sizeof(bident), "%d:%d", pi->pi_slot, pi->pi_func); bctxt = blockif_open(opts, bident); if (bctxt == NULL) { perror("Could not open backing file"); return (1); } size = blockif_size(bctxt); sectsz = blockif_sectsz(bctxt); blockif_psectsz(bctxt, &sts, &sto); sc = calloc(1, sizeof(struct pci_vtblk_softc)); sc->bc = bctxt; for (i = 0; i < VTBLK_RINGSZ; i++) { struct pci_vtblk_ioreq *io = &sc->vbsc_ios[i]; io->io_req.br_callback = pci_vtblk_done; io->io_req.br_param = io; io->io_sc = sc; io->io_idx = i; } pthread_mutex_init(&sc->vsc_mtx, NULL); /* init virtio softc and virtqueues */ vi_softc_linkup(&sc->vbsc_vs, &vtblk_vi_consts, sc, pi, &sc->vbsc_vq); sc->vbsc_vs.vs_mtx = &sc->vsc_mtx; sc->vbsc_vq.vq_qsize = VTBLK_RINGSZ; /* sc->vbsc_vq.vq_notify = we have no per-queue notify */ /* * Create an identifier for the backing file. Use parts of the * md5 sum of the filename */ MD5Init(&mdctx); MD5Update(&mdctx, opts, strlen(opts)); MD5Final(digest, &mdctx); sprintf(sc->vbsc_ident, "BHYVE-%02X%02X-%02X%02X-%02X%02X", digest[0], digest[1], digest[2], digest[3], digest[4], digest[5]); /* setup virtio block config space */ sc->vbsc_cfg.vbc_capacity = size / DEV_BSIZE; /* 512-byte units */ sc->vbsc_cfg.vbc_size_max = 0; /* not negotiated */ sc->vbsc_cfg.vbc_seg_max = BLOCKIF_IOV_MAX; sc->vbsc_cfg.vbc_geometry.cylinders = 0; /* no geometry */ sc->vbsc_cfg.vbc_geometry.heads = 0; sc->vbsc_cfg.vbc_geometry.sectors = 0; sc->vbsc_cfg.vbc_blk_size = sectsz; sc->vbsc_cfg.vbc_topology.physical_block_exp = (sts > sectsz) ? (ffsll(sts / sectsz) - 1) : 0; sc->vbsc_cfg.vbc_topology.alignment_offset = (sto != 0) ? ((sts - sto) / sectsz) : 0; sc->vbsc_cfg.vbc_topology.min_io_size = 0; sc->vbsc_cfg.vbc_topology.opt_io_size = 0; sc->vbsc_cfg.vbc_writeback = 0; /* * Should we move some of this into virtio.c? Could * have the device, class, and subdev_0 as fields in * the virtio constants structure. */ pci_set_cfgdata16(pi, PCIR_DEVICE, VIRTIO_DEV_BLOCK); pci_set_cfgdata16(pi, PCIR_VENDOR, VIRTIO_VENDOR); pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_STORAGE); pci_set_cfgdata16(pi, PCIR_SUBDEV_0, VIRTIO_TYPE_BLOCK); pci_set_cfgdata16(pi, PCIR_SUBVEND_0, VIRTIO_VENDOR); if (vi_intr_init(&sc->vbsc_vs, 1, fbsdrun_virtio_msix())) { blockif_close(sc->bc); free(sc); return (1); } vi_set_io_bar(&sc->vbsc_vs, 0); return (0); } static int pci_vtblk_cfgwrite(void *vsc, int offset, int size, uint32_t value) { DPRINTF(("vtblk: write to readonly reg %d\n\r", offset)); return (1); } static int pci_vtblk_cfgread(void *vsc, int offset, int size, uint32_t *retval) { struct pci_vtblk_softc *sc = vsc; void *ptr; /* our caller has already verified offset and size */ ptr = (uint8_t *)&sc->vbsc_cfg + offset; memcpy(retval, ptr, size); return (0); } struct pci_devemu pci_de_vblk = { .pe_emu = "virtio-blk", .pe_init = pci_vtblk_init, .pe_barwrite = vi_pci_write, .pe_barread = vi_pci_read }; PCI_EMUL_SET(pci_de_vblk);