3 * Copyright (c) 2000 by Matthew Jacob
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions, and the following disclaimer,
11 * without modification, immediately at the beginning of the file.
12 * 2. The name of the author may not be used to endorse or promote products
13 * derived from this software without specific prior written permission.
15 * Alternatively, this software may be distributed under the terms of the
16 * the GNU Public License ("GPL").
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 #include <sys/ioctl.h>
46 static char rbuf[132];
49 case SESTYP_UNSPECIFIED:
50 sprintf(rbuf, "Unspecified");
53 sprintf(rbuf, "Device");
56 sprintf(rbuf, "Power supply");
59 sprintf(rbuf, "Cooling element");
62 sprintf(rbuf, "Temperature sensors");
65 sprintf(rbuf, "Door Lock");
68 sprintf(rbuf, "Audible alarm");
71 sprintf(rbuf, "Enclosure services controller electronics");
74 sprintf(rbuf, "SCC controller electronics");
77 sprintf(rbuf, "Nonvolatile cache");
80 sprintf(rbuf, "Uninterruptible power supply");
83 sprintf(rbuf, "Display");
86 sprintf(rbuf, "Key pad entry device");
88 case SESTYP_ENCLOSURE:
89 sprintf(rbuf, "Enclosure");
92 sprintf(rbuf, "SCSI port/transceiver");
95 sprintf(rbuf, "Language");
98 sprintf(rbuf, "Communication Port");
101 sprintf(rbuf, "Voltage Sensor");
104 sprintf(rbuf, "Current Sensor");
106 case SESTYP_SCSI_TGT:
107 sprintf(rbuf, "SCSI target port");
109 case SESTYP_SCSI_INI:
110 sprintf(rbuf, "SCSI initiator port");
113 sprintf(rbuf, "Simple sub-enclosure");
116 sprintf(rbuf, "Array device");
118 case SESTYP_SASEXPANDER:
119 sprintf(rbuf, "SAS Expander");
121 case SESTYP_SASCONNECTOR:
122 sprintf(rbuf, "SAS Connector");
125 (void) sprintf(rbuf, "<Type 0x%x>", type);
132 scode2ascii(u_char code)
134 static char rbuf[32];
135 switch (code & 0xf) {
136 case SES_OBJSTAT_UNSUPPORTED:
137 sprintf(rbuf, "status not supported");
142 case SES_OBJSTAT_CRIT:
143 sprintf(rbuf, "critical");
145 case SES_OBJSTAT_NONCRIT:
146 sprintf(rbuf, "non-critical");
148 case SES_OBJSTAT_UNRECOV:
149 sprintf(rbuf, "unrecoverable");
151 case SES_OBJSTAT_NOTINSTALLED:
152 sprintf(rbuf, "not installed");
154 case SES_OBJSTAT_UNKNOWN:
155 sprintf(rbuf, "unknown status");
157 case SES_OBJSTAT_NOTAVAIL:
158 sprintf(rbuf, "status not available");
161 sprintf(rbuf, "unknown status code %x", code & 0xf);
169 stat2ascii(int eletype __unused, u_char *cstat)
171 static char ebuf[256], *scode;
173 scode = scode2ascii(cstat[0]);
174 sprintf(ebuf, "Status=%s (bytes=0x%02x 0x%02x 0x%02x 0x%02x)",
175 scode, cstat[0], cstat[1], cstat[2], cstat[3]);