1 2007-07-02 Alan Modra <amodra@bigpond.net.au>
4 * objcopy.c (filter_symbols): Correct relocatable file test.
6 2007-07-02 Alan Modra <amodra@bigpond.net.au>
8 * Makefile.am: Run "make dep-am".
9 * Makefile.in: Regenerate.
10 * aclocal.m4: Regenerate.
11 * config.in: Regenerate.
12 * doc/Makefile.in: Regenerate.
13 * po/POTFILES.in: Regenerate.
14 * po/binutils.pot: Regenerate.
16 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
18 * aclocal.m4: Regenerated.
19 * doc/Makefile.in: Likewise.
20 * Makefile.in: Likewise.
22 2007-06-29 Joseph Myers <joseph@codesourcery.com>
24 * readelf.c (display_power_gnu_attribute, process_power_specific):
26 (process_arch_specific): Call process_power_specific.
28 2007-06-29 Joseph Myers <joseph@codesourcery.com>
30 * readelf.c (display_mips_gnu_attribute): New.
31 (process_mips_specific): Call process_attributes.
33 2007-06-29 Joseph Myers <joseph@codesourcery.com>
35 * readelf.c (display_gnu_attribute): New.
36 (process_arm_specific): Rearrange as process_attributes.
37 (process_arm_specific): Replace by wrapper of process_attributes.
39 2007-06-28 Roland McGrath <roland@frob.com>
41 * objcopy.c (setup_section): Don't reset ELF section type to
42 SHT_NOBITS when it is SHT_NOTE.
43 * doc/binutils.texi (objcopy, strip): Mention under --only-keep-debug.
45 2007-06-27 Alan Modra <amodra@bigpond.net.au>
47 * ar.c: Rename uses of bfd.next to bfd.archive_next throughout.
49 * binemul.c: Likewise.
50 * objcopy.c: Likewise.
51 * dlltool.c: Likewise.
53 2007-06-26 Shantonu Sen <ssen@apple.com>
56 * Makefile.am (windres_DEPENDENCIES, windmc_DEPENDENCIES): Move
57 dependency on $(LIBICONV) to ...
58 (windres_LDADD, windmc_LDADD) ... here.
59 * Makefile.in: Regenerate.
61 2007-06-21 Alan Modra <amodra@bigpond.net.au>
63 * embedspu.sh (relas): Correct sh_info parsing.
65 2007-06-19 Danny Smith <dannysmith@users.sourceforge.net>
67 * objdump.c: Include sys/stat.h.
69 2007-06-19 Kai Tietz <kai.tietz@onevision.com>
71 * Makefile.am: Add windmc tool.
72 * Makefile.in: Regenerate.
73 * configure.in: Add windmc tool.
74 * configure: Regenerate.
79 * doc/Makefile.am: Add windmc tool.
80 * doc/Makefile.in: Regenerate.
81 * doc/binutils.texi: Add windmc documentation.
82 * NEWS: Mention new tool.
84 2007-06-18 Andi Kleen <ak@suse.de>
86 * objdump.c: Include sys/mman.h
87 (print_file_list): Remove f, add map, mapsize, linemap, maxline,
88 last_line, first fields.
91 (print_file_open): Call slurp_file and index_file. Initialize new
93 (skip_to_line): Rename to print_line and write only single line.
95 (show_line): Change to new algorithm.
97 2007-06-18 Thomas Weidenmueller <w3seek@reactos.org>
99 * resres.c (probe_binary): Fix test for badly formatted headers.
101 2007-06-18 Kai Tietz <Kai.Tietz@onevision.com>
103 * rclex.c: (cpp_line): Add code_page pragma support.
104 * windres.c: (usage, long_options, main): Add new option
106 * winduni.c: (wind_default_codepage, wind_current_codepage): New.
107 (unicode_from_ascii, ascii_from_unicode): Use
108 wind_current_codepage as codepage parameter.
109 (unicode_print): Print 4 characters for hexadecimal values in
111 * winduni.h: (wind_default_codepage, wind_current_codepage):
113 * doc/binutils.texi: Document new option.
114 * NEWS: Mention new features of windres.
116 2007-06-18 Brian D. Watt <bwatt@us.ibm.com>
118 * embedspu.sh: Parse _SPUEAR_ symbol values as hex.
120 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
122 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
124 * acinclude.m4: Removed.
126 * Makefile.in: Regenerated.
127 * aclocal.m4: Likewise.
128 * configure: Likewise.
130 2007-06-11 Nathan Sidwell <nathan@codesourcery.com>
132 * dwarf.c (decode_location_expression): Add DW_OP_form_tls_address.
134 2007-06-06 Kai Tietz <Kai.Tietz@onevision.com>
136 PR binutils/4356 binutils/591
137 * resrc.c (filename_need_quotes): New function.
138 (look_for_default): If filename_need_quotes is true then quote the
139 filename in the command line being created.
140 (read_rc_file): Likewise.
142 2007-06-06 Ben Elliston <bje@au.ibm.com>
144 * doc/binutils.texi (objdump): Fix capitalisation of "PowerPC".
146 2007-06-05 Kai Tietz <Kai.Tietz@onevision.com>
148 * Makefile.am: Add LIBICONV to windres.
149 * acinclude.m4: Added missing "lib-*.m4" and "lt*.m4" files.
150 * configure.in: Add AC_CHECK_HEADER for iconv.h and use AM_ICONV.
151 * config.in: Add ICONV defines.
152 * aclocal.m4: Regenerate.
153 * confugure: Regenerate.
154 * winduni.c: (local_iconv_map codepages, wind_language_t,
155 languages, unicode_is_valid_codepage, wind_find_language_by_id,
156 wind_find_language_by_codepage, wind_find_codepage_info,
157 unicode_from_codepage, codepage_from_unicode, iconv_onechar,
158 wind_iconv_cp, wind_MultiByteToWideChar wind_WideCharToMultiByte):
160 (ascii_from_unicode): Use codepage_from_unicode.
161 (ascii_from_unicode): Use unicode_from_codepage.
162 Use for cygwin windows API for unicode transformation.
163 * winduni.h: (CP_ACP, CP_UTF7, CP_UTF8, CP_OEM, CP_UTF16): New
165 (wind_language_t, local_iconv_map): New types.
166 (wind_find_language_by_id, wind_find_language_by_codepage,
167 unicode_is_valid_codepage, wind_find_codepage_info,
168 unicode_from_codepage, codepage_from_unicode): New
171 2007-06-05 Alan Modra <amodra@bigpond.net.au>
173 * embedspu.sh: Handle R_SPU_PPU* relocs with no symbol.
175 2007-05-30 Alan Modra <amodra@bigpond.net.au>
177 * objcopy.c (copy_object): Revert 2007-05-11 change. Don't
178 avoid calling bfd_copy_private_bfd_data for ELF STRIP_NONDEBUG.
179 (setup_section): Don't modify flags, and don't avoid calling
180 bfd_copy_private_section_data for ELF STRIP_NONDEBUG.
181 * readelf.c (process_program_headers): Ignore .dynamic of type
184 2007-05-29 Alan Modra <amodra@bigpond.net.au>
186 * embedspu.sh: Emit SPU ELF image to .data.rel.ro.speelf if
187 pic or pie and image needs relocs.
189 2007-05-24 Steve Ellcey <sje@cup.hp.com>
191 * Makefile.in: Regenerate.
192 * configure: Regenerate.
193 * aclocal.m4: Regenerate.
194 * doc/Makefile.in: Regenerate.
196 2007-05-24 Kai Tietz <Kai.Tietz@onevision.com>
198 * rcparse.y: Join strings for elements having no side-effects in
201 2007-05-23 Kai Tietz <Kai.Tietz@onevision.com>
203 * rclex.c: New file replacing rclex.l.
205 * windint.h: New file holding common structure and type
207 * Makefile.am: Added new header windint.h and exchanged rclex.l by
209 * Makefile.in: Regenerate.
210 * rcparse.y: Renamed some structures.
211 Use in internal representation always bfd_vma instead of long or
213 Removed from %union unused stringtable.
214 Added to %union suni structure for unicode strings.
215 Added new tokens for ANICURSOR, ANIICON, DLGINCLUDE,
216 DLGINIT, FONTDIR, HTML, MANIFEST, PLUGPLAY, VXD,
217 TOOLBAR, BUTTON, QUOTEDUNISTRING, and SIZEDUNISTRING.
218 Added support for these new rc file tokens.
219 * resbin.c: Rewrote using bfd and binary structures, and support
221 * rescoff.c: Likewise.
222 * resres.c: Likewise.
223 * resrc.c: Likewise. Dumps as RC are now recompilable.
224 * windres.c: As above. Using bfd for res and provide target
225 specific endianess support.
226 * windres.h: Use windint.h as include. Additionally removed K&R
228 * winduni.c: New printing and unichar support routines.
229 * winduni.h: Prototypes for new unichar helpers.
230 * windint.h: New file.
232 2007-05-22 Paul Brook <paul@codesourcery.com>
234 * objdump.c (find_symbol_for_address): Merge section and target
235 specific filtering code.
237 2007-05-22 Nick Clifton <nickc@redhat.com>
239 * doc/binutils.texi: Use @copying around the copyright notice.
241 2007-05-21 Richard Sandiford <richard@codesourcery.com>
243 * objdump.c (disassemble_bytes): Ignore disassembler_needs_relocs
244 for executables and shared libraries.
246 2007-05-18 Nathan Sidwell <nathan@codesourcery.com>
248 * objcopy.c (strip_main): Detect identical input and output file
250 (copy_main): Refactor tempname detection and use.
252 2007-05-17 Nick Clifton <nickc@redhat.com>
254 * objdump.c (load_debug_section): Select bias for DWARF debug
255 addresses based on the flavour of the bfd.
257 2007-05-11 Alan Modra <amodra@bigpond.net.au>
260 * objcopy.c (copy_object): Don't copy ELF program headers for
263 2007-05-11 Alan Modra <amodra@bigpond.net.au>
265 * embedspu.sh (find_prog): Prefer prog in same dir as embedspu
266 over one found on the users path.
267 (main): Generate .reloc for each R_SPU_PPU* reloc.
269 2007-04-28 Alan Modra <amodra@bigpond.net.au>
271 * prdbg.c (tg_variable): Adjust for changed demangler.
272 (tg_start_function): Likewise.
274 2007-04-27 Alan Modra <amodra@bigpond.net.au>
276 * bucumm.h: Split off host dependencies to..
278 Many files: Include sysdep.h. Remove duplicate headers and reorder.
279 * Makefile.am: Run "make dep-am".
280 * Makefile.in: Regenerate.
282 2007-04-24 Nick Clifton <nickc@redhat.com>
284 * srconv.c (walk_tree_type_1): Initialise dpt.dunno.
286 2007-04-24 Nathan Froyd <froydnj@codesourcery.com>
287 Phil Edwards <phil@codesourcery.com>
289 * objcopy.c (filter_symbols): Explicitly stripping a symbol
290 used in relocations is an error.
291 Retype 'keep' to bfd_boolean.
293 2007-04-24 Alan Modra <amodra@bigpond.net.au>
295 * Makefile.in: Regenerate.
296 * doc/Makefile.in: Regenerate.
298 2007-04-20 Nathan Froyd <froydnj@codesourcery.com>
299 Phil Edwards <phil@codesourcery.com>
300 Thomas de Lellis <tdel@windriver.com>
302 * objcopy.c (reverse_bytes): New variable.
303 (command_line_switch, copy_main): Add OPTION_REVERSE_ENDIAN.
304 (copy_options, copy_usage): Add "reverse-bytes" entry.
305 (copy_section): Reverse bytes within output sections.
306 * doc/binutils.texi: Document new objcopy option.
308 2007-04-20 Nick Clifton <nickc@redhat.com>
310 * rclex.l: Allow underscores at the start of identifiers.
312 2007-04-19 Alan Modra <amodra@bigpond.net.au>
314 * budemang.c: Delete.
315 * budemang.h: Delete.
316 * addr2line.c (translate_addresses): Call bfd_demangle rather than
318 * nm.c (print_symname): Likewise.
319 * objdump.c (objdump_print_symname, dump_symbols): Likewise.
320 (dump_bfd): Likewise.
321 * prdbg.c (struct pr_handle <demangler>): Add int param.
322 (tg_variable, tg_start_function): Adjust demangler calls.
323 * Makefile.am: Remove mention of budemang.[ch]. Run "make dep-am".
324 * Makefile.in: Regenerate.
325 * po/POTFILES.in: Regenerate.
327 2007-04-14 Steve Ellcey <sje@cup.hp.com>
329 * Makefile.am: Add ACLOCAL_AMFLAGS.
330 * configure.in: Change macro call order.
331 * Makefile.in: Regenerate.
332 * configure: Regenerate.
334 2007-04-13 Nathan Sidwell <nathan@codesourcery.com>
336 * Makefile.am (TOOL_PROGS): Add objcopy.
337 * Makefile.in: Rebuilt.
339 2007-04-12 H.J. Lu <hongjiu.lu@intel.com>
342 * objcopy.c (copy_object): Don't stop when there are no
343 sections to be copied.
345 2007-04-10 Vladimir Prus <vladimir@codesourcery.com>
347 * NEWS: Mention disjoint histograms support in
350 2007-04-09 Daniel Jacobowitz <dan@codesourcery.com>
352 * dwarf.c (process_debug_info): Do not require DW_AT_frame_base for
353 DW_TAG_inlined_subroutine.
355 2007-04-06 Matt Thomas <matt@netbsd.org>
357 * MAINTAINERS: Add myself as VAX and NetBSD support maintainer.
359 2007-04-05 Alan Modra <amodra@bigpond.net.au>
362 * nm.c (print_value): Cast bfd_vma to unsigned long to suit
365 2007-04-02 Nick Clifton <nickc@redhat.com>
368 * nm.c (value_format): Replace with value_format_32bit and
370 (set_radix): Update setting of value_format.
371 (set_print_width): New function. Compute the address size of a
372 given bfd and set the print_width global appropriately.
373 (display_archive): Use set_print_width.
374 (display_file): Likewise,
375 (print_object_filename_sysv): Update use of print_width.
376 (print_archive_member_sysv): Likewise.
377 (print_symbol_filename_posix): Likewise.
378 (print_sumbol_info_bfd, print_symbol_info_sysv): Likewise.
380 2007-03-28 Richard Sandiford <richard@codesourcery.com>
381 Phil Edwards <phil@codesourcery.com>
383 * doc/binutils.texi: Put the contents after the title page rather
384 than at the end of the document.
386 2007-03-28 Nick Clifton <nickc@redhat.com>
388 * readelf.c (slurp_rela_relocs): Add newline to end of error
390 (slurp_rel_relocs, request_dump, request_dump_byname,
391 process_program_headers, process_dynamic_section,
392 process_symbol_table, process_mips_specific, main): Likewise.
394 2007-03-28 Alan Modra <amodra@bigpond.net.au>
396 * MAINTAINERS: Update mailing list addresses. Add myself
399 2007-03-27 Alan Modra <amodra@bigpond.net.au>
401 * embedspu.sh: Correct toe_addr quoting.
403 2007-03-27 Alan Modra <amodra@bigpond.net.au>
405 * embedspu.sh: Combine "_EAR_" and "_EAR_*" patterns. Tighten
406 .toe section and .toe address checks. Use .reloc for _EAR*
407 symbols defined in non-BSS sections. Build table for _SPUEAR_
410 2007-03-23 Kaz Kojima <kkojima@rr.iij4u.or.jp>
413 * readelf.c (debug_apply_rela_addends): Do nothing for SH.
415 2007-03-22 Joseph Myers <joseph@codesourcery.com>
417 * doc/binutils.texi: Include VERSION_PACKAGE when reporting
420 2007-03-16 Kai Tietz <Kai.Tietz@onevision.com>
422 * dlltool.c (make_one_lib_file): Use pc-relative relocation
423 instead of an absolute relocation for x86_64-pc-mingw32 target.
425 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
427 * Makefile.am (REPORT_BUGS_TO): Removed.
428 (INCLUDES): Remove -DREPORT_BUGS_TO.
429 * Makefile.in: Regenerated.
431 * bucomm.c: Don't include bfdver.h.
432 * objdump.c: Likewise.
433 * version.c: Likewise.
435 * bucomm.h: Include bfdver.h.
437 * configure.in (--with-bugurl): Removed.
438 * configure: Regenerated.
440 * doc/Makefile.am (binutils_TEXINFOS): Removed.
441 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
442 (TEXI2DVI): Likewise.
443 (config.texi): Removed.
444 (MOSTLYCLEANFILES): Remove config.texi.
445 * doc/Makefile.in: Regenerated.
447 * doc/binutils.texi: Include bfdver.texi instead of
450 2007-03-13 Nick Clifton <nickc@redhat.com>
452 * readelf.c (dump_section): Also test for SHT_REL sections when
453 producing the warning about unapplied relocs.
455 2007-03-07 Joseph Myers <joseph@codesourcery.com>
457 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
459 * doc/Makefile.am (config.texi): Define BUGURL.
460 * doc/binutils.texi: Use BUGURL. Remove text about large files
462 * Makefile.in, configure, doc/Makefile.in: Regenerate.
464 2007-03-01 Phil Edwards <phil@codesourcery.com>
465 Richard Sandiford <richard@codesourcery.com>
467 * NEWS: Mention addition of --extract-symbol.
468 * doc/binutils.texi: Document it.
469 * objcopy.c (extract_symbol): New variable.
470 (OPTION_EXTRACT_SYMBOLS): New command_line_switch.
471 (copy_options): Add an entry for --extract-symbol.
472 (copy_usage): Mention --extract-symbol.
473 (copy_object): Set the start address to zero for --extract-symbol.
474 Do not copy private BFD data in that case.
475 (setup_section): Set the size, LMA and VMA to zero for
476 --extract-symbol. Do not copy private BFD data in that case.
477 (copy_section): Do not copy section contents if --extract-symbol
479 (copy_main): Set extract_symbol to TRUE if --extract-symbol
482 2007-03-01 Paul Brook <paul@codesourcery.com>
484 * MAINTAINERS: Update my entry.
486 2007-03-01 Joseph Myers <joseph@codesourcery.com>
488 * version.c: Update copyright date.
490 2007-03-01 Daniel Jacobowitz <dan@codesourcery.com>
492 * Makefile.am (install-exec-local): Depend on $(noinst_PROGRAMS).
493 Adjust $(EXEEXT) handling for $(RENAMED_PROGS).
494 * Makefile.in, doc/Makefile.in: Regenerate.
496 2007-03-01 Alan Modra <amodra@bigpond.net.au>
498 * embedspu.sh: Set type and size of global program handle symbol.
500 2007-02-28 Alan Modra <amodra@bigpond.net.au>
502 * Makefile.am (PROGS): Delete.
503 (RENAMED_PROGS): Define. Extracted from..
504 (noinst_PROGRAMS): ..here. Add BUILD_MISC.
505 (install-exec-local): Adjust.
506 * Makefile.in: Regenerate.
508 2007-02-28 Alan Modra <amodra@bigpond.net.au>
510 * Makefile.am (PROGS): Add BUILD_INSTALL_MISC.
511 (bin_PROGRAMS): Replace BUILD_MISC with BUILD_INSTALL_MISC.
512 (EXTRA_PROGRAMS): Remove bin2c.
513 (bin2c$(EXEEXT_FOR_BUILD)): New rule.
514 (bin2c_SOURCES): Delete.
515 (DISTCLEANFILES): Remove sysinfo.
516 (MOSTLYCLEANFILES): Add sysinfo$(EXEEXT_FOR_BUILD) and
517 bin2c$(EXEEXT_FOR_BUILD).
518 * configure.in (BUILD_MISC): Add $(EXEEXT_FOR_BUILD) to bin2c.
520 (BUILD_INSTALL_MISC): ..here.
521 * Makefile.in: Regenerate.
522 * configure: Regenerate.
524 2007-02-27 Alan Modra <amodra@bigpond.net.au>
527 * Makefile.am (EXTRA_PROGRAMS): Add bin2c.
528 (CFILES): Add bin2c.c.
529 (bin2c_SOURCES): Define.
530 (bin2c.o): Dependencies from "make dep-am".
531 * configure.in (BUILD_MISC): Add bin2c.
532 * version.c: Update year.
533 * po/POTFILES.in: Regenerate.
534 * Makefile.in: Regenerate.
535 * configure: Regenerate.
537 2007-02-17 Mark Mitchell <mark@codesourcery.com>
538 Nathan Sidwell <nathan@codesourcery.com>
539 Vladimir Prus <vladimir@codesourcery.com
540 Joseph Myers <joseph@codesourcery.com>
542 * configure.in (--with-bugurl): New option.
543 * configure: Regenerate.
544 * Makefile.am (REPORT_BUGS_TO): Define.
545 (INCLUDES): Define REPORT_BUGS_TO.
546 Regenerate dependencies.
547 * Makefile.in: Regenerate.
548 * doc/Makefile.in: Regenerate.
549 * bucomm.h: Remove include of bin-bugs.h.
550 * addr2line.c (usage): Don't print empty REPORT_BUGS_TO.
551 * ar.c (usage): Pass s to list_supported_targets. Don't print
552 empty REPORT_BUGS_TO.
553 * coffdump.c (show_usage): Don't print empty REPORT_BUGS_TO.
554 * cxxfilt.c (usage): Print bug url when giving help.
555 * dlltool.c (usage): Likewise.
556 * dllwrap.c (usage): Likewise.
557 * nlmconv.c (show_usage): Don't print empty REPORT_BUGS_TO.
558 * nm.c (usage): Likewise.
559 * objcopy.c (copy_usage, strip_usage): Likewise.
560 * objdump.c (usage): Likewise.
561 * readelf.c ((usage): Likewise. Add STREAM argument. Adjust
563 * size.c (usage): Don't print empty REPORT_BUGS_TO.
564 * srconv.c (show_usage): Likewise.
565 * strings.c (usage): Likewise.
566 * sysdymp.c (show_usage): Likewise.
567 * windres.c (usage): Likewise.
569 2007-02-13 Alan Modra <amodra@bigpond.net.au>
571 * embedspu.sh: Add -W to readelf invocation.
573 2007-02-06 Dave Brolley <brolley@redhat.com>
575 * MAINTAINERS: Add myself as the maintainer of the MeP port.
577 2007-02-06 Nick Clifton <nickc@redhat.com>
580 * readelf.c: Include elf/h8.h twice. The first time in order to
581 get the reloc numbers, the second time in order to get the reloc
583 (dump_section): Tell the user if the section being displayed has
584 unprocessed relocs associated with it.
585 (get_reloc_size): New function - returns the size of a reloc.
586 (debug_apply_rela_addends): Use get_reloc_size().
587 * dwarf.c (read_and_display_attr_value): Extend number of
588 languages known for the DW_AT_language attribute.
589 (process_debug_info): Display the attribute offset before decoding
590 the attribute, in case there are problems.
592 2007-02-05 Dave Brolley <brolley@redhat.com>
594 * readelf.c (dump_relocations): Don't check for
595 (rtype == NULL && type == R_RELC).
597 2007-02-05 Dave Brolley <brolley@redhat.com>
599 * Makefile.am (readelf.o): Depends on $(INCDIR)/elf/mep.h.
600 * Makefile.in: Regenerated.
601 * Contribute the following changes:
602 2003-10-29 Dave Brolley <brolley@redhat.com>
604 * configure.in: Define SKIP_ZEROES and SKIP_ZEROES_AT_END for mep.
605 * configure: Regenerated.
607 2001-04-03 Ben Elliston <bje@redhat.com>
609 * readelf.c: Include "elf/mep.h".
610 (guess_is_rela): Handle EM_CYGNUS_MEP.
611 (get_machine_name): Ditto.
612 (dump_relocations): Ditto.
614 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
616 * MAINTAINERS: Add a space between H.J. and Lu.
618 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
620 * doc/binutils.texi (objdump): Document the new addr64 option
621 for i386 disassembler.
623 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
626 * configure.in (DLLTOOL_DEFAULT): New. Defined for the first PE
628 (DLLTOOL_DEFS): Add $DLLTOOL_DEFAULT.
629 * configure: Regenerated.
631 * dlltool.c (mname): Defined with DLLTOOL_DEFAULT_XXX.
633 2007-02-02 Nick Clifton <nickc@redhat.com>
635 * doc/binutils.texi (objdump): Document support for disassembling
636 the 440 PowerPC architecture.
638 2007-01-31 Nathan Sidwell <nathan@codesourcery.com>
640 * dwarf.c (process_debug_info): Protect against bogus length and
643 2007-01-25 Kazu Hirata <kazu@codesourcery.com>
645 * ar.c (print_contents, extract_file): Cast the return value
648 2007-01-12 Alan Modra <amodra@bigpond.net.au>
650 * ar.c (open_inarch): Check fwrite return. Use size_t.
651 (extract_file): Likewise. Remove test for "negative" file size.
652 * readelf.c (process_program_headers): Check fscanf return.
654 2007-01-11 H.J. Lu <hongjiu.lu@intel.com>
656 * bucomm.c (template_in_dir): Fix typo.
658 2007-01-11 Alan Modra <amodra@bigpond.net.au>
660 * embedspu.sh: New file.
661 * Makefile.am (embedspu): Add rule.
662 * configure.in (BUILD_MISC): Add embedspu for powerpc-linux.
663 * Makefile.in: Regenerate.
664 * configure: Regenerate.
666 2007-01-11 Alan Modra <amodra@bigpond.net.au>
668 * bucomm.h (make_tempdir): Declare independently of HAVE_MKDTEMP.
669 * bucomm.c (template_in_dir): New function, split out from..
670 (make_tempname): ..here. Open the file with O_EXCL if !HAVE_MKSTEMP.
671 (make_tempdir): Use template_in_dir. Handle directory creation
673 * objcopy.c (MKDIR): Don't define.
674 (copy_archive): Use make_tempdir when !HAVE_MKDTEMP too. Fix
677 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
679 * readelf.c (get_machine_flags): Treat Fido as an architecture
682 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
684 * configure.in: Renamed target x86_64-*-mingw64 to
686 * configure: Regenerated.
688 2007-01-05 Alan Modra <amodra@bigpond.net.au>
690 * readelf.c (dump_section): Don't print 32-bit values, which
691 were done incorrectly for little-endian. Instead print bytes.
693 For older changes see ChangeLog-2006
699 version-control: never