1 # Makefile.in generated by automake 1.14 from Makefile.am.
4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
17 # $Id: Makefile.am 648 2013-03-05 17:54:27Z des $
19 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
20 am__make_running_with_option = \
21 case $${target_option-} in \
23 *) echo "am__make_running_with_option: internal error: invalid" \
24 "target option '$${target_option-}' specified" >&2; \
28 sane_makeflags=$$MAKEFLAGS; \
29 if $(am__is_gnu_make); then \
30 sane_makeflags=$$MFLAGS; \
35 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
36 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
42 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44 for flg in $$sane_makeflags; do \
45 test $$skip_next = yes && { skip_next=no; continue; }; \
48 -*I) strip_trailopt 'I'; skip_next=yes;; \
49 -*I?*) strip_trailopt 'I';; \
50 -*O) strip_trailopt 'O'; skip_next=yes;; \
51 -*O?*) strip_trailopt 'O';; \
52 -*l) strip_trailopt 'l'; skip_next=yes;; \
53 -*l?*) strip_trailopt 'l';; \
54 -[dEDm]) skip_next=yes;; \
55 -[JT]) skip_next=yes;; \
58 *$$target_option*) has_opt=yes; break;; \
62 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
63 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
64 pkgdatadir = $(datadir)/@PACKAGE@
65 pkgincludedir = $(includedir)/@PACKAGE@
66 pkglibdir = $(libdir)/@PACKAGE@
67 pkglibexecdir = $(libexecdir)/@PACKAGE@
68 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
69 install_sh_DATA = $(install_sh) -c -m 644
70 install_sh_PROGRAM = $(install_sh) -c
71 install_sh_SCRIPT = $(install_sh) -c
72 INSTALL_HEADER = $(INSTALL_DATA)
73 transform = $(program_transform_name)
80 build_triplet = @build@
83 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
84 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
85 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
86 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
87 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
88 $(top_srcdir)/configure.ac
89 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
91 mkinstalldirs = $(install_sh) -d
92 CONFIG_HEADER = $(top_builddir)/config.h
94 CONFIG_CLEAN_VPATH_FILES =
95 AM_V_P = $(am__v_P_@AM_V@)
96 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
99 AM_V_GEN = $(am__v_GEN_@AM_V@)
100 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
101 am__v_GEN_0 = @echo " GEN " $@;
103 AM_V_at = $(am__v_at_@AM_V@)
104 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
109 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
110 ctags-recursive dvi-recursive html-recursive info-recursive \
111 install-data-recursive install-dvi-recursive \
112 install-exec-recursive install-html-recursive \
113 install-info-recursive install-pdf-recursive \
114 install-ps-recursive install-recursive installcheck-recursive \
115 installdirs-recursive pdf-recursive ps-recursive \
116 tags-recursive uninstall-recursive
117 am__can_run_installinfo = \
118 case $$AM_UPDATE_INFO_DIR in \
120 *) (install-info --version) >/dev/null 2>&1;; \
122 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
123 distclean-recursive maintainer-clean-recursive
124 am__recursive_targets = \
125 $(RECURSIVE_TARGETS) \
126 $(RECURSIVE_CLEAN_TARGETS) \
127 $(am__extra_recursive_targets)
128 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
130 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
131 # Read a list of newline-separated strings from the standard input,
132 # and print each of them once, without duplicates. Input order is
134 am__uniquify_input = $(AWK) '\
135 BEGIN { nonempty = 0; } \
136 { items[$$0] = 1; nonempty = 1; } \
137 END { if (nonempty) { for (i in items) print i; }; } \
139 # Make sure the list of sources is unique. This is necessary because,
140 # e.g., the same source file might be shared among _SOURCES variables
141 # for different programs/libraries.
142 am__define_uniq_tagged_files = \
143 list='$(am__tagged_files)'; \
144 unique=`for i in $$list; do \
145 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
146 done | $(am__uniquify_input)`
149 DIST_SUBDIRS = $(SUBDIRS)
150 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
153 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
154 sed_rest='s,^[^/]*/*,,'; \
155 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
156 sed_butlast='s,/*[^/]*$$,,'; \
157 while test -n "$$dir1"; do \
158 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
159 if test "$$first" != "."; then \
160 if test "$$first" = ".."; then \
161 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
162 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
164 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
165 if test "$$first2" = "$$first"; then \
166 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
170 dir0="$$dir0"/"$$first"; \
173 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
178 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
180 AUTOCONF = @AUTOCONF@
181 AUTOHEADER = @AUTOHEADER@
182 AUTOMAKE = @AUTOMAKE@
185 CCDEPMODE = @CCDEPMODE@
188 CPPFLAGS = @CPPFLAGS@
189 CRYPTO_LIBS = @CRYPTO_LIBS@
190 CRYPT_LIBS = @CRYPT_LIBS@
191 CYGPATH_W = @CYGPATH_W@
196 DSYMUTIL = @DSYMUTIL@
206 INSTALL_DATA = @INSTALL_DATA@
207 INSTALL_PROGRAM = @INSTALL_PROGRAM@
208 INSTALL_SCRIPT = @INSTALL_SCRIPT@
209 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
218 LTLIBOBJS = @LTLIBOBJS@
219 MAKEINFO = @MAKEINFO@
220 MANIFEST_TOOL = @MANIFEST_TOOL@
226 OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
230 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
231 PACKAGE_NAME = @PACKAGE_NAME@
232 PACKAGE_STRING = @PACKAGE_STRING@
233 PACKAGE_TARNAME = @PACKAGE_TARNAME@
234 PACKAGE_URL = @PACKAGE_URL@
235 PACKAGE_VERSION = @PACKAGE_VERSION@
236 PATH_SEPARATOR = @PATH_SEPARATOR@
239 SET_MAKE = @SET_MAKE@
243 abs_builddir = @abs_builddir@
244 abs_srcdir = @abs_srcdir@
245 abs_top_builddir = @abs_top_builddir@
246 abs_top_srcdir = @abs_top_srcdir@
247 ac_ct_AR = @ac_ct_AR@
248 ac_ct_CC = @ac_ct_CC@
249 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
250 am__include = @am__include@
251 am__leading_dot = @am__leading_dot@
252 am__quote = @am__quote@
254 am__untar = @am__untar@
257 build_alias = @build_alias@
258 build_cpu = @build_cpu@
259 build_os = @build_os@
260 build_vendor = @build_vendor@
261 builddir = @builddir@
263 datarootdir = @datarootdir@
266 exec_prefix = @exec_prefix@
268 host_alias = @host_alias@
269 host_cpu = @host_cpu@
271 host_vendor = @host_vendor@
273 includedir = @includedir@
275 install_sh = @install_sh@
277 libexecdir = @libexecdir@
278 localedir = @localedir@
279 localstatedir = @localstatedir@
282 oldincludedir = @oldincludedir@
285 program_transform_name = @program_transform_name@
288 sharedstatedir = @sharedstatedir@
290 sysconfdir = @sysconfdir@
291 target_alias = @target_alias@
292 top_build_prefix = @top_build_prefix@
293 top_builddir = @top_builddir@
294 top_srcdir = @top_srcdir@
299 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
301 case '$(am__configure_deps)' in \
303 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
304 && { if test -f $@; then exit 0; else break; fi; }; \
308 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
309 $(am__cd) $(top_srcdir) && \
310 $(AUTOMAKE) --foreign doc/Makefile
312 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
315 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
317 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
318 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
321 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
322 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
324 $(top_srcdir)/configure: $(am__configure_deps)
325 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
326 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
327 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
328 $(am__aclocal_m4_deps):
336 # This directory's subdirectories are mostly independent; you can cd
337 # into them and run 'make' without going through this Makefile.
338 # To change the values of 'make' variables: instead of editing Makefiles,
339 # (1) if the variable is set in 'config.status', edit 'config.status'
340 # (which will cause the Makefiles to be regenerated when you run 'make');
341 # (2) otherwise, pass the desired values on the 'make' command line.
342 $(am__recursive_targets):
344 if $(am__make_keepgoing); then \
345 failcom='fail=yes'; \
350 target=`echo $@ | sed s/-recursive//`; \
352 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
353 *) list='$(SUBDIRS)' ;; \
355 for subdir in $$list; do \
356 echo "Making $$target in $$subdir"; \
357 if test "$$subdir" = "."; then \
359 local_target="$$target-am"; \
361 local_target="$$target"; \
363 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
366 if test "$$dot_seen" = "no"; then \
367 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
370 ID: $(am__tagged_files)
371 $(am__define_uniq_tagged_files); mkid -fID $$unique
375 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
378 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
379 include_option=--etags-include; \
382 include_option=--include; \
385 list='$(SUBDIRS)'; for subdir in $$list; do \
386 if test "$$subdir" = .; then :; else \
387 test ! -f $$subdir/TAGS || \
388 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
391 $(am__define_uniq_tagged_files); \
393 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
394 test -n "$$unique" || unique=$$empty_fix; \
395 if test $$# -gt 0; then \
396 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
399 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
403 ctags: ctags-recursive
406 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
407 $(am__define_uniq_tagged_files); \
408 test -z "$(CTAGS_ARGS)$$unique" \
409 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
413 here=`$(am__cd) $(top_builddir) && pwd` \
414 && $(am__cd) $(top_srcdir) \
415 && gtags -i $(GTAGS_ARGS) "$$here"
416 cscopelist: cscopelist-recursive
418 cscopelist-am: $(am__tagged_files)
419 list='$(am__tagged_files)'; \
420 case "$(srcdir)" in \
421 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
422 *) sdir=$(subdir)/$(srcdir) ;; \
424 for i in $$list; do \
425 if test -f "$$i"; then \
426 echo "$(subdir)/$$i"; \
430 done >> $(top_builddir)/cscope.files
433 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
435 distdir: $(DISTFILES)
436 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
437 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
438 list='$(DISTFILES)'; \
439 dist_files=`for file in $$list; do echo $$file; done | \
440 sed -e "s|^$$srcdirstrip/||;t" \
441 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
442 case $$dist_files in \
443 */*) $(MKDIR_P) `echo "$$dist_files" | \
444 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
447 for file in $$dist_files; do \
448 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
449 if test -d $$d/$$file; then \
450 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
451 if test -d "$(distdir)/$$file"; then \
452 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
454 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
455 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
456 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
458 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
460 test -f "$(distdir)/$$file" \
461 || cp -p $$d/$$file "$(distdir)/$$file" \
465 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
466 if test "$$subdir" = .; then :; else \
468 || test -d "$(distdir)/$$subdir" \
469 || $(MKDIR_P) "$(distdir)/$$subdir" \
471 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
473 new_distdir=$$reldir; \
474 dir1=$$subdir; dir2="$(top_distdir)"; \
476 new_top_distdir=$$reldir; \
477 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
478 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
479 ($(am__cd) $$subdir && \
480 $(MAKE) $(AM_MAKEFLAGS) \
481 top_distdir="$$new_top_distdir" \
482 distdir="$$new_distdir" \
483 am__remove_distdir=: \
484 am__skip_length_check=: \
485 am__skip_mode_fix=: \
491 check: check-recursive
493 installdirs: installdirs-recursive
495 install: install-recursive
496 install-exec: install-exec-recursive
497 install-data: install-data-recursive
498 uninstall: uninstall-recursive
501 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
503 installcheck: installcheck-recursive
505 if test -z '$(STRIP)'; then \
506 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
507 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
510 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
511 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
512 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
519 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
520 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
522 maintainer-clean-generic:
523 @echo "This command is intended for maintainers to use"
524 @echo "it deletes files that may require special tools to rebuild."
525 clean: clean-recursive
527 clean-am: clean-generic clean-libtool mostlyclean-am
529 distclean: distclean-recursive
531 distclean-am: clean-am distclean-generic distclean-tags
547 install-dvi: install-dvi-recursive
553 install-html: install-html-recursive
557 install-info: install-info-recursive
563 install-pdf: install-pdf-recursive
567 install-ps: install-ps-recursive
573 maintainer-clean: maintainer-clean-recursive
575 maintainer-clean-am: distclean-am maintainer-clean-generic
577 mostlyclean: mostlyclean-recursive
579 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
591 .MAKE: $(am__recursive_targets) install-am install-strip
593 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
594 check-am clean clean-generic clean-libtool cscopelist-am ctags \
595 ctags-am distclean distclean-generic distclean-libtool \
596 distclean-tags distdir dvi dvi-am html html-am info info-am \
597 install install-am install-data install-data-am install-dvi \
598 install-dvi-am install-exec install-exec-am install-html \
599 install-html-am install-info install-info-am install-man \
600 install-pdf install-pdf-am install-ps install-ps-am \
601 install-strip installcheck installcheck-am installdirs \
602 installdirs-am maintainer-clean maintainer-clean-generic \
603 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
604 ps ps-am tags tags-am uninstall uninstall-am
607 # Tell versions [3.59,3.63) of GNU make to not export all variables.
608 # Otherwise a system limit (for SysV at least) may be exceeded.