3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="NO" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
28 early_late_divider="FILESYSTEMS" # Script that separates early/late
29 # stages of the boot process. Make sure you know
30 # the ramifications if you change this.
31 # See rc.conf(5) for more details.
32 always_force_depends="NO" # Set to check that indicated dependencies are
33 # running during boot (can increase boot time).
35 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
36 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
37 apmd_enable="NO" # Run apmd to handle APM event from userland.
38 apmd_flags="" # Flags to apmd (if enabled).
39 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
40 ddb_config="/etc/ddb.conf" # ddb(8) config file.
41 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
42 devd_flags="" # Additional flags for devd(8).
43 #kld_list="" # Kernel modules to load after local disks are mounted
44 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
45 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
46 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
47 powerd_enable="NO" # Run powerd to lower our power usage.
48 powerd_flags="" # Flags to powerd (if enabled).
49 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
50 tmpsize="20m" # Size of mfs /tmp if created
51 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
52 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
53 varsize="32m" # Size of mfs /var if created
54 varmfs_flags="-S" # Extra mount options for the mfs /var
55 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
56 cleanvar_enable="YES" # Clean the /var directory
57 local_startup="/usr/local/etc/rc.d" # startup script dirs.
58 script_name_sep=" " # Change if your startup scripts' names contain spaces
59 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
62 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
64 gptboot_enable="YES" # GPT boot success/failure reporting.
66 # Experimental - test before enabling
67 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
68 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
69 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
70 gbde_lockdir="/etc" # Where to look for gbde lockfiles
72 # GELI disk encryption configuration.
73 geli_devices="" # List of devices to automatically attach in addition to
74 # GELI devices listed in /etc/fstab.
75 geli_tries="" # Number of times to attempt attaching geli device.
76 # If empty, kern.geom.eli.tries will be used.
77 geli_default_flags="" # Default flags for geli(8).
78 geli_autodetach="YES" # Automatically detach on last close.
79 # Providers are marked as such when all file systems are
82 #geli_devices="da1 mirror/home"
83 #geli_da1_flags="-p -k /etc/geli/da1.keys"
84 #geli_da1_autodetach="NO"
85 #geli_mirror_home_flags="-k /etc/geli/home.keys"
87 geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
90 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
91 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
92 fsck_y_flags="" # Additional flags for fsck -y
93 background_fsck="YES" # Attempt to run fsck in the background where possible.
94 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
95 netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
96 extra_netfs_types="NO" # List of network extra filesystem types for delayed
97 # mount at startup (or NO).
99 ##############################################################
100 ### Network configuration sub-section ######################
101 ##############################################################
103 ### Basic network and firewall/security options: ###
104 hostname="" # Set this!
105 hostid_enable="YES" # Set host UUID.
106 hostid_file="/etc/hostid" # File with hostuuid.
107 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
108 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
109 dhclient_flags="" # Extra flags to pass to dhcp client.
110 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
111 background_dhclient="NO" # Start dhcp client in the background.
112 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
113 synchronous_dhclient="NO" # Start dhclient directly on configured
114 # interfaces during startup.
115 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
116 defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
117 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
118 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
119 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
121 firewall_enable="NO" # Set to YES to enable firewall functionality
122 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
123 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
124 firewall_quiet="NO" # Set to YES to suppress rule display
125 firewall_logging="NO" # Set to YES to enable events logging
126 firewall_flags="" # Flags passed to ipfw when type is a file
127 firewall_coscripts="" # List of executables/scripts to run after
128 # firewall starts/stops
129 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
131 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
133 firewall_simple_iif="ed1" # Inside network interface for "simple"
135 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
137 firewall_simple_oif="ed0" # Outside network interface for "simple"
139 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
141 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
143 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
144 # for "simple" firewall.
145 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
147 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
148 # for "simple" firewall.
149 firewall_myservices="" # List of TCP ports on which this host
150 # offers services for "workstation" firewall.
151 firewall_allowservices="" # List of IPs which have access to
152 # $firewall_myservices for "workstation"
154 firewall_trusted="" # List of IPs which have full access to this
155 # host for "workstation" firewall.
156 firewall_logdeny="NO" # Set to YES to log default denied incoming
157 # packets for "workstation" firewall.
158 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
159 # for which denied incoming packets are not
160 # logged for "workstation" firewall.
161 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
162 firewall_nat_interface="" # Public interface or IPaddress to use
163 firewall_nat_flags="" # Additional configuration parameters
164 dummynet_enable="NO" # Load the dummynet(4) module
165 ip_portrange_first="NO" # Set first dynamically allocated port
166 ip_portrange_last="NO" # Set last dynamically allocated port
167 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
168 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
169 ike_flags="" # Additional flags for IKE daemon
170 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
171 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
172 natd_program="/sbin/natd" # path to natd, if you want a different one.
173 natd_enable="NO" # Enable natd (if firewall_enable == YES).
174 natd_interface="" # Public interface or IPaddress to use.
175 natd_flags="" # Additional flags for natd.
176 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
177 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
178 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
179 # /usr/src/contrib/ipfilter/rules for examples
180 ipfilter_flags="" # additional flags for ipfilter
181 ipnat_enable="NO" # Set to YES to enable ipnat functionality
182 ipnat_program="/sbin/ipnat" # where the ipnat program lives
183 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
184 ipnat_flags="" # additional flags for ipnat
185 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
186 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
187 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
188 ipfs_enable="NO" # Set to YES to enable saving and restoring
189 # of state tables at shutdown and boot
190 ipfs_program="/sbin/ipfs" # where the ipfs program lives
191 ipfs_flags="" # additional flags for ipfs
192 pf_enable="NO" # Set to YES to enable packet filter (pf)
193 pf_rules="/etc/pf.conf" # rules definition file for pf
194 pf_program="/sbin/pfctl" # where the pfctl program lives
195 pf_flags="" # additional flags for pfctl
196 pflog_enable="NO" # Set to YES to enable packet filter logging
197 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
198 pflog_program="/sbin/pflogd" # where the pflogd program lives
199 pflog_flags="" # additional flags for pflogd
200 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
201 ftpproxy_flags="" # additional flags for ftp-proxy(8)
202 pfsync_enable="NO" # Expose pf state to other hosts for syncing
203 pfsync_syncdev="" # Interface for pfsync to work through
204 pfsync_syncpeer="" # IP address of pfsync peer host
205 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
206 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
207 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
208 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
209 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
210 # NOTE: this violates the TCP specification
211 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
212 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
213 network_interfaces="auto" # List of network interfaces (or "auto").
214 cloned_interfaces="" # List of cloned network interfaces to create.
215 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
216 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
217 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
218 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
219 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
220 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
221 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
222 #vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
223 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
224 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
225 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8)
226 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
228 #autobridge_interfaces="bridge0" # List of bridges to check
229 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
231 # If you have any sppp(4) interfaces above, you might also want to set
232 # the following parameters. Refer to spppcontrol(8) for their meaning.
233 sppp_interfaces="" # List of sppp interfaces.
234 #sppp_interfaces="...0" # example: sppp over ...
235 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
236 gif_interfaces="" # List of GIF tunnels.
237 #gif_interfaces="gif0 gif1" # Examples typically for a router.
238 # Choose correct tunnel addrs.
239 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
240 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
241 fec_interfaces="" # List of Fast EtherChannels.
242 #fec_interfaces="fec0 fec1"
243 #fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
244 #fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
246 # User ppp configuration.
247 ppp_enable="NO" # Start user-ppp (or NO).
248 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
249 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
250 # For details see man page for ppp(8). Default is auto.
251 ppp_nat="YES" # Use PPP's internal network address translation or NO.
252 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
253 ppp_user="root" # Which user to run ppp as
255 # Start multiple instances of ppp at boot time
256 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
257 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
258 #ppp_profile2_nat="NO" # Override nat mode for profile2
259 # profile3 uses default ppp_mode and ppp_nat
261 ### Network daemon (miscellaneous) ###
262 hostapd_enable="NO" # Run hostap daemon.
263 syslogd_enable="YES" # Run syslog daemon (or NO).
264 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
265 syslogd_flags="-s" # Flags to syslogd (if enabled).
266 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
267 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
268 inetd_flags="-wW -C 60" # Optional flags to inetd
269 hastd_enable="NO" # Run the HAST daemon (YES/NO).
270 hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
271 hastd_flags="" # Optional flags to hastd.
273 # named. It may be possible to run named in a sandbox, man security for
276 named_enable="NO" # Run named, the DNS server (or NO).
277 named_program="/usr/sbin/named" # Path to named, if you want a different one.
278 named_conf="/etc/namedb/named.conf" # Path to the configuration file
279 #named_flags="" # Use this for flags OTHER than -u and -c
280 named_uid="bind" # User to run named as
281 named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
282 named_chroot_autoupdate="YES" # Automatically install/update chrooted
283 # components of named. See /etc/rc.d/named.
284 named_symlink_enable="YES" # Symlink the chrooted pid file
285 named_wait="NO" # Wait for working name service before exiting
286 named_wait_host="localhost" # Hostname to check if named_wait is enabled
287 named_auto_forward="NO" # Set up forwarders from /etc/resolv.conf
288 named_auto_forward_only="NO" # Do "forward only" instead of "forward first"
291 # kerberos. Do not run the admin daemons on slave servers
293 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
294 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
295 kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
296 kadmind5_server_enable="NO" # Run kadmind (or NO)
297 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
298 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
299 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
301 gssd_enable="NO" # Run the gssd daemon (or NO).
302 gssd_flags="" # Flags for gssd.
304 rwhod_enable="NO" # Run the rwho daemon (or NO).
305 rwhod_flags="" # Flags for rwhod
306 rarpd_enable="NO" # Run rarpd (or NO).
307 rarpd_flags="-a" # Flags to rarpd.
308 bootparamd_enable="NO" # Run bootparamd (or NO).
309 bootparamd_flags="" # Flags to bootparamd
310 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
311 pppoed_provider="*" # Provider and ppp(8) config file entry.
312 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
313 pppoed_interface="fxp0" # The interface that pppoed runs on.
314 sshd_enable="NO" # Enable sshd
315 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
316 sshd_flags="" # Additional flags for sshd.
317 ftpd_enable="NO" # Enable stand-alone ftpd.
318 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
319 ftpd_flags="" # Additional flags to stand-alone ftpd.
321 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
322 amd_enable="NO" # Run amd service with $amd_flags (or NO).
323 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
324 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
325 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
326 nfs_client_enable="NO" # This host is an NFS client (or NO).
327 nfs_access_cache="60" # Client cache timeout in seconds
328 nfs_server_enable="NO" # This host is an NFS server (or NO).
329 oldnfs_server_enable="NO" # Run the old NFS server (YES/NO).
330 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
331 mountd_enable="NO" # Run mountd (or NO).
332 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
333 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
334 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
335 nfs_bufpackets="" # bufspace (in packets) for client
336 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
337 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
338 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
339 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
340 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
341 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
342 rpcbind_flags="" # Flags to rpcbind (if enabled).
343 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
344 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
345 keyserv_flags="" # Flags to keyserv (if enabled).
346 nfsv4_server_enable="NO" # Enable support for NFSv4
347 nfscbd_enable="NO" # NFSv4 client side callback daemon
348 nfscbd_flags="" # Flags for nfscbd
349 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
350 nfsuserd_flags="" # Flags for nfsuserd
352 ### Network Time Services options: ###
353 timed_enable="NO" # Run the time daemon (or NO).
354 timed_flags="" # Flags to timed (if enabled).
355 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
356 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
357 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
358 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
359 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
360 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
361 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
362 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
363 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
364 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
365 # Flags to ntpd (if enabled).
367 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
368 nis_client_enable="NO" # We're an NIS client (or NO).
369 nis_client_flags="" # Flags to ypbind (if enabled).
370 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
371 nis_ypset_flags="" # Flags to ypset (if enabled).
372 nis_server_enable="NO" # We're an NIS server (or NO).
373 nis_server_flags="" # Flags to ypserv (if enabled).
374 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
375 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
376 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
377 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
380 # Be sure to understand the security implications of running SNMP v1/v2
382 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
383 bsnmpd_flags="" # Flags for bsnmpd.
385 ### Network routing options: ###
386 defaultrouter="NO" # Set to default gateway (or NO).
387 static_arp_pairs="" # Set to static ARP list (or leave empty).
388 static_ndp_pairs="" # Set to static NDP list (or leave empty).
389 static_routes="" # Set to static route list (or leave empty).
390 natm_static_routes="" # Set to static route list for NATM (or leave empty).
391 gateway_enable="NO" # Set to YES if this host will be a gateway.
392 routed_enable="NO" # Set to YES to enable a routing daemon.
393 routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
394 routed_flags="-q" # Flags for routing daemon.
395 mrouted_enable="NO" # Do IPv4 multicast routing.
396 mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
397 # routing daemon. You need to
398 # install it from package or
400 mrouted_flags="" # Flags for multicast routing daemon.
401 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
402 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
403 ipxrouted_flags="" # Flags for IPX routing daemon.
404 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
405 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
406 accept_sourceroute="NO" # accept source routed packets to us
408 ### ATM interface options: ###
409 atm_enable="NO" # Configure ATM interfaces (or NO).
410 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
411 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
412 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
413 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
414 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
415 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
416 atm_pvcs="" # Set to PVC list (or leave empty).
417 atm_arps="" # Set to permanent ARP list (or leave empty).
420 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
421 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
423 sdpd_enable="NO" # Enable sdpd(8) (or NO)
424 sdpd_control="/var/run/sdp" # sdpd(8) control socket
425 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
426 sdpd_username="nobody" # it initializes
428 bthidd_enable="NO" # Enable bthidd(8) (or NO)
429 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
430 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
432 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
433 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
435 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
436 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
437 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
438 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
440 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
441 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
442 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
443 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
445 ubthidhci_enable="NO" # Switch an USB BT controller present on
446 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
447 #ubthidhci_addr="2" # Check usbconfig list to find the correct
448 # numbers for your system.
450 ### Network link/usability verification options
451 netwait_enable="NO" # Enable rc.d/netwait (or NO)
452 #netwait_ip="" # IP addresses to be pinged by netwait.
453 netwait_timeout="60" # Total number of seconds to perform pings.
454 #netwait_if="" # Interface name to watch link state on.
455 netwait_if_timeout="30" # Total number of seconds to monitor link state.
457 ### Miscellaneous network options: ###
458 icmp_bmcastecho="NO" # respond to broadcast ping packets
460 ### IPv6 options: ###
461 ipv6_network_interfaces="auto" # List of IPv6 network interfaces
462 # (or "auto" or "none").
463 ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
464 # corresponding $ifconfig_IF_ipv6 is
465 # marked as IFDISABLED for security
467 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
468 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
469 ipv6_static_routes="" # Set to static route list (or leave empty).
470 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
471 # route toward loopback interface.
472 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
473 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
474 ipv6_cpe_wanif="NO" # Set to the upstram interface name if this
475 # node will work as a router to forward IPv6
476 # packets not explicitly addressed to itself.
477 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
480 route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
481 route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
482 route6d_flags="" # Flags to IPv6 routing daemon.
483 #route6d_flags="-l" # Example for route6d with only IPv6 site local
485 #route6d_flags="-q" # If you want to run a routing daemon on an end
486 # node, you should stop advertisement.
487 #ipv6_network_interfaces="ed0 ep0" # Examples for router
488 # or static configuration for end node.
489 # Choose correct prefix value.
490 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
491 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
492 ipv6_default_interface="NO" # Default output interface for scoped addrs.
493 # This works only with
494 # ipv6_gateway_enable="NO".
495 rtsol_flags="" # Flags to IPv6 router solicitation.
496 rtsold_enable="NO" # Set to YES to enable an IPv6 router
497 # solicitation daemon.
498 rtsold_flags="-a" # Flags to an IPv6 router solicitation
500 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
501 # advertisement daemon. If set to YES,
502 # this router becomes a possible candidate
503 # IPv6 default router for local subnets.
504 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
505 mroute6d_enable="NO" # Do IPv6 multicast routing.
506 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
507 # routing daemon. You need to
508 # install it from package or
510 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
511 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
512 # tunneling interface. Specify this entry
513 # to enable 6to4 interface.
514 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
515 # to limit peer addr range. Effective value
517 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
518 # If you like, you can set "AUTO" for this.
519 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
520 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
521 # IPv6-to-IPv4 TCP translator. You also need
523 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
524 # communication. (like ::ffff:a.b.c.d)
525 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
526 # see /usr/src/contrib/ipfilter/rules
528 ip6addrctl_enable="YES" # Set to YES to enable default address selection
529 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
530 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
531 # (ipv4_prefer, ipv6_prefer, or AUTO)
533 ##############################################################
534 ### System console options #################################
535 ##############################################################
537 keyboard="" # keyboard device to use (default /dev/kbd0).
538 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
539 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
540 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
541 keychange="NO" # function keys default values (or NO).
542 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
543 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
544 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
545 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
546 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
547 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
548 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
549 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
550 # specifically overriden in rc.conf(5).
551 moused_enable="NO" # Run the mouse daemon.
552 moused_type="auto" # See man page for rc.conf(5) for available settings.
553 moused_port="/dev/psm0" # Set to your mouse port.
554 moused_flags="" # Any additional flags to moused.
555 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
556 # language code table, specify alternative range
557 # start like mousechar_start=3, see vidcontrol(1)
558 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
559 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
561 ##############################################################
562 ### Mail Transfer Agent (MTA) options ######################
563 ##############################################################
565 mta_start_script="/etc/rc.sendmail"
566 # Script to start your chosen MTA, called by /etc/rc.
567 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
568 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
569 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
570 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
571 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
572 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
573 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
574 # Flags for localhost-only MTA
575 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
576 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
577 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
578 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
579 # Flags for sendmail_msp_queue daemon.
580 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
583 ##############################################################
584 ### Miscellaneous administrative options ###################
585 ##############################################################
587 auditd_enable="NO" # Run the audit daemon.
588 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
589 auditd_flags="" # Which options to pass to the audit daemon.
590 auditdistd_enable="NO" # Run the audit daemon.
591 auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
592 auditdistd_flags="" # Which options to pass to the auditdistd daemon.
593 cron_enable="YES" # Run the periodic job daemon.
594 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
595 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
596 cron_flags="" # Which options to pass to the cron daemon.
597 lpd_enable="NO" # Run the line printer daemon.
598 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
599 lpd_flags="" # Flags to lpd (if enabled).
600 nscd_enable="NO" # Run the nsswitch caching daemon.
601 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
602 chkprintcap_flags="-d" # Create missing directories by default.
603 dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO).
604 dumpdir="/var/crash" # Directory where crash dumps are to be stored
605 savecore_flags="" # Used if dumpdev is enabled above, and present.
606 crashinfo_enable="YES" # Automatically generate crash dump summary.
607 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
608 quota_enable="NO" # turn on quotas on startup (or NO).
609 check_quotas="YES" # Check quotas on startup (or NO).
610 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
611 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
612 quotacheck_flags="-a" # Check all file system quotas (if enabled)
613 accounting_enable="NO" # Turn on process accounting (or NO).
614 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
615 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
617 # Emulation/compatibility services provided by /etc/rc.d/abi
618 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
619 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
620 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
621 clear_tmp_enable="NO" # Clear /tmp at startup.
622 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
623 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
624 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
625 # shared library search paths
626 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
627 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
628 # a.out shared library search paths
629 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
630 # Local directories with ldconfig configuration files.
631 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
632 # Local directories with 32-bit compatibility ldconfig
633 # configuration files.
634 kern_securelevel_enable="NO" # kernel security level (see security(7))
635 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
636 # Note that setting securelevel to 0 will result
637 # in the system booting with securelevel set to 1, as
638 # init(8) will raise the level when rc(8) completes.
639 update_motd="YES" # update version info in /etc/motd (or NO)
640 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
641 # /var/db/entropy-file is preferred if / is not avail.
642 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
643 entropy_save_sz="2048" # Size of the entropy cache files.
644 entropy_save_num="8" # Number of entropy cache files to save.
645 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
646 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
647 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
648 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
649 watchdogd_enable="NO" # Start the software watchdog daemon
650 watchdogd_flags="" # Flags to watchdogd (if enabled)
651 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
653 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
654 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
655 # apply (must be mounted already, i.e. fstab(5))
656 devfs_load_rulesets="NO" # Enable to always load the default rulesets
657 performance_cx_lowest="HIGH" # Online CPU idle state
658 performance_cpu_freq="NONE" # Online CPU frequency
659 economy_cx_lowest="HIGH" # Offline CPU idle state
660 economy_cpu_freq="NONE" # Offline CPU frequency
661 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
662 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
663 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
665 newsyslog_enable="YES" # Run newsyslog at startup.
666 newsyslog_flags="-CN" # Newsyslog flags to create marked files
667 mixer_enable="YES" # Run the sound mixer.
668 opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
670 ##############################################################
671 ### Jail Configuration #######################################
672 ##############################################################
673 jail_enable="NO" # Set to NO to disable starting of any jails
674 jail_parallel_start="NO" # Start jails in the background
675 jail_list="" # Space separated list of names of jails
676 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
677 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
678 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
681 # To use rc's built-in jail infrastructure create entries for
682 # each jail, specified in jail_list, with the following variables.
684 # - replace 'example' with the jail's name.
685 # - except rootdir, hostname, ip and the _multi<n> addresses,
686 # all of the following variables may be made global jail variables
687 # if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset).
689 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
690 #jail_example_hostname="default.domain.com" # Jail's hostname
691 #jail_example_interface="" # Jail's interface variable to create IP aliases on
692 #jail_example_fib="0" # Routing table for setfib(1)
693 #jail_example_ip="192.0.2.10,2001:db8::17" # Jail's primary IPv4 and IPv6 address
694 #jail_example_ip_multi0="2001:db8::10" # and another IPv6 address
695 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
696 #jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
697 # starting the jail. More than one can be
698 # specified using a trailing number
699 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
700 #jail_example_devfs_enable="NO" # mount devfs in the jail
701 #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail -
702 # usually you want "devfsrules_jail".
703 #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
704 #jail_example_procfs_enable="NO" # mount procfs in jail
705 #jail_example_mount_enable="NO" # mount/umount jail's fs
706 #jail_example_fstab="" # fstab(5) for mount/umount
707 #jail_example_flags="-l -U root" # flags for jail(8)
708 #jail_example_parameters="allow.raw_sockets=1" # extra parameters for this jail
710 ##############################################################
711 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
712 ### scripts to source rc_conf_files overrides safely. ##
713 ##############################################################
715 if [ -z "${source_rc_confs_defined}" ]; then
716 source_rc_confs_defined=yes
718 local i sourced_files
719 for i in ${rc_conf_files}; do
720 case ${sourced_files} in
724 sourced_files="${sourced_files}:$i:"