3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 #rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="NO" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
28 early_late_divider="FILESYSTEMS" # Script that separates early/late
29 # stages of the boot process. Make sure you know
30 # the ramifications if you change this.
31 # See rc.conf(5) for more details.
32 always_force_depends="NO" # Set to check that indicated dependencies are
33 # running during boot (can increase boot time).
35 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
36 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
37 apmd_enable="NO" # Run apmd to handle APM event from userland.
38 apmd_flags="" # Flags to apmd (if enabled).
39 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
40 ddb_config="/etc/ddb.conf" # ddb(8) config file.
41 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
42 devd_flags="" # Additional flags for devd(8).
43 #kld_list="" # Kernel modules to load after local disks are mounted
44 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
45 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
46 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
47 powerd_enable="NO" # Run powerd to lower our power usage.
48 powerd_flags="" # Flags to powerd (if enabled).
49 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
50 tmpsize="20m" # Size of mfs /tmp if created
51 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
52 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
53 varsize="32m" # Size of mfs /var if created
54 varmfs_flags="-S" # Extra mount options for the mfs /var
55 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
56 cleanvar_enable="YES" # Clean the /var directory
57 local_startup="/usr/local/etc/rc.d" # startup script dirs.
58 script_name_sep=" " # Change if your startup scripts' names contain spaces
59 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
62 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
64 gptboot_enable="YES" # GPT boot success/failure reporting.
66 # Experimental - test before enabling
67 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
68 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
69 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
70 gbde_lockdir="/etc" # Where to look for gbde lockfiles
72 # GELI disk encryption configuration.
73 geli_devices="" # List of devices to automatically attach in addition to
74 # GELI devices listed in /etc/fstab.
75 geli_tries="" # Number of times to attempt attaching geli device.
76 # If empty, kern.geom.eli.tries will be used.
77 geli_default_flags="" # Default flags for geli(8).
78 geli_autodetach="YES" # Automatically detach on last close.
79 # Providers are marked as such when all file systems are
82 #geli_devices="da1 mirror/home"
83 #geli_da1_flags="-p -k /etc/geli/da1.keys"
84 #geli_da1_autodetach="NO"
85 #geli_mirror_home_flags="-k /etc/geli/home.keys"
87 geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
90 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
91 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
92 fsck_y_flags="" # Additional flags for fsck -y
93 background_fsck="YES" # Attempt to run fsck in the background where possible.
94 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
95 netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
96 extra_netfs_types="NO" # List of network extra filesystem types for delayed
97 # mount at startup (or NO).
99 ##############################################################
100 ### Network configuration sub-section ######################
101 ##############################################################
103 ### Basic network and firewall/security options: ###
104 hostname="" # Set this!
105 hostid_enable="YES" # Set host UUID.
106 hostid_file="/etc/hostid" # File with hostuuid.
107 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
108 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
109 dhclient_flags="" # Extra flags to pass to dhcp client.
110 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
111 background_dhclient="NO" # Start dhcp client in the background.
112 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
113 synchronous_dhclient="NO" # Start dhclient directly on configured
114 # interfaces during startup.
115 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
116 defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
117 netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
118 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
119 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
120 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
122 firewall_enable="NO" # Set to YES to enable firewall functionality
123 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
124 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
125 firewall_quiet="NO" # Set to YES to suppress rule display
126 firewall_logging="NO" # Set to YES to enable events logging
127 firewall_flags="" # Flags passed to ipfw when type is a file
128 firewall_coscripts="" # List of executables/scripts to run after
129 # firewall starts/stops
130 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
132 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
134 firewall_simple_iif="ed1" # Inside network interface for "simple"
136 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
138 firewall_simple_oif="ed0" # Outside network interface for "simple"
140 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
142 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
144 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
145 # for "simple" firewall.
146 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
148 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
149 # for "simple" firewall.
150 firewall_myservices="" # List of TCP ports on which this host
151 # offers services for "workstation" firewall.
152 firewall_allowservices="" # List of IPs which have access to
153 # $firewall_myservices for "workstation"
155 firewall_trusted="" # List of IPs which have full access to this
156 # host for "workstation" firewall.
157 firewall_logdeny="NO" # Set to YES to log default denied incoming
158 # packets for "workstation" firewall.
159 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
160 # for which denied incoming packets are not
161 # logged for "workstation" firewall.
162 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
163 firewall_nat_interface="" # Public interface or IPaddress to use
164 firewall_nat_flags="" # Additional configuration parameters
165 dummynet_enable="NO" # Load the dummynet(4) module
166 ip_portrange_first="NO" # Set first dynamically allocated port
167 ip_portrange_last="NO" # Set last dynamically allocated port
168 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
169 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
170 ike_flags="" # Additional flags for IKE daemon
171 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
172 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
173 natd_program="/sbin/natd" # path to natd, if you want a different one.
174 natd_enable="NO" # Enable natd (if firewall_enable == YES).
175 natd_interface="" # Public interface or IPaddress to use.
176 natd_flags="" # Additional flags for natd.
177 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
178 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
179 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
180 # /usr/src/contrib/ipfilter/rules for examples
181 ipfilter_flags="" # additional flags for ipfilter
182 ipnat_enable="NO" # Set to YES to enable ipnat functionality
183 ipnat_program="/sbin/ipnat" # where the ipnat program lives
184 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
185 ipnat_flags="" # additional flags for ipnat
186 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
187 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
188 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
189 ipfs_enable="NO" # Set to YES to enable saving and restoring
190 # of state tables at shutdown and boot
191 ipfs_program="/sbin/ipfs" # where the ipfs program lives
192 ipfs_flags="" # additional flags for ipfs
193 pf_enable="NO" # Set to YES to enable packet filter (pf)
194 pf_rules="/etc/pf.conf" # rules definition file for pf
195 pf_program="/sbin/pfctl" # where the pfctl program lives
196 pf_flags="" # additional flags for pfctl
197 pflog_enable="NO" # Set to YES to enable packet filter logging
198 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
199 pflog_program="/sbin/pflogd" # where the pflogd program lives
200 pflog_flags="" # additional flags for pflogd
201 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
202 ftpproxy_flags="" # additional flags for ftp-proxy(8)
203 pfsync_enable="NO" # Expose pf state to other hosts for syncing
204 pfsync_syncdev="" # Interface for pfsync to work through
205 pfsync_syncpeer="" # IP address of pfsync peer host
206 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
207 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
208 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
209 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
210 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
211 # NOTE: this violates the TCP specification
212 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
213 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
214 network_interfaces="auto" # List of network interfaces (or "auto").
215 cloned_interfaces="" # List of cloned network interfaces to create.
216 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
217 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
218 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
219 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
220 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
221 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
222 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
223 #vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
224 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
225 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
226 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8)
227 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
229 #autobridge_interfaces="bridge0" # List of bridges to check
230 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
232 # If you have any sppp(4) interfaces above, you might also want to set
233 # the following parameters. Refer to spppcontrol(8) for their meaning.
234 sppp_interfaces="" # List of sppp interfaces.
235 #sppp_interfaces="...0" # example: sppp over ...
236 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
237 gif_interfaces="" # List of GIF tunnels.
238 #gif_interfaces="gif0 gif1" # Examples typically for a router.
239 # Choose correct tunnel addrs.
240 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
241 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
242 fec_interfaces="" # List of Fast EtherChannels.
243 #fec_interfaces="fec0 fec1"
244 #fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
245 #fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
247 # User ppp configuration.
248 ppp_enable="NO" # Start user-ppp (or NO).
249 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
250 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
251 # For details see man page for ppp(8). Default is auto.
252 ppp_nat="YES" # Use PPP's internal network address translation or NO.
253 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
254 ppp_user="root" # Which user to run ppp as
256 # Start multiple instances of ppp at boot time
257 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
258 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
259 #ppp_profile2_nat="NO" # Override nat mode for profile2
260 # profile3 uses default ppp_mode and ppp_nat
262 ### Network daemon (miscellaneous) ###
263 hostapd_enable="NO" # Run hostap daemon.
264 syslogd_enable="YES" # Run syslog daemon (or NO).
265 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
266 syslogd_flags="-s" # Flags to syslogd (if enabled).
267 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
268 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
269 inetd_flags="-wW -C 60" # Optional flags to inetd
270 hastd_enable="NO" # Run the HAST daemon (YES/NO).
271 hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
272 hastd_flags="" # Optional flags to hastd.
274 # named. It may be possible to run named in a sandbox, man security for
277 named_enable="NO" # Run named, the DNS server (or NO).
278 named_program="/usr/sbin/named" # Path to named, if you want a different one.
279 named_conf="/etc/namedb/named.conf" # Path to the configuration file
280 #named_flags="" # Use this for flags OTHER than -u and -c
281 named_uid="bind" # User to run named as
282 named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
283 named_chroot_autoupdate="YES" # Automatically install/update chrooted
284 # components of named. See /etc/rc.d/named.
285 named_symlink_enable="YES" # Symlink the chrooted pid file
286 named_wait="NO" # Wait for working name service before exiting
287 named_wait_host="localhost" # Hostname to check if named_wait is enabled
288 named_auto_forward="NO" # Set up forwarders from /etc/resolv.conf
289 named_auto_forward_only="NO" # Do "forward only" instead of "forward first"
292 # kerberos. Do not run the admin daemons on slave servers
294 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
295 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
296 kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
297 kadmind5_server_enable="NO" # Run kadmind (or NO)
298 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
299 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
300 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
302 gssd_enable="NO" # Run the gssd daemon (or NO).
303 gssd_flags="" # Flags for gssd.
305 rwhod_enable="NO" # Run the rwho daemon (or NO).
306 rwhod_flags="" # Flags for rwhod
307 rarpd_enable="NO" # Run rarpd (or NO).
308 rarpd_flags="-a" # Flags to rarpd.
309 bootparamd_enable="NO" # Run bootparamd (or NO).
310 bootparamd_flags="" # Flags to bootparamd
311 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
312 pppoed_provider="*" # Provider and ppp(8) config file entry.
313 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
314 pppoed_interface="fxp0" # The interface that pppoed runs on.
315 sshd_enable="NO" # Enable sshd
316 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
317 sshd_flags="" # Additional flags for sshd.
318 ftpd_enable="NO" # Enable stand-alone ftpd.
319 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
320 ftpd_flags="" # Additional flags to stand-alone ftpd.
322 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
323 amd_enable="NO" # Run amd service with $amd_flags (or NO).
324 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
325 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
326 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
327 nfs_client_enable="NO" # This host is an NFS client (or NO).
328 nfs_access_cache="60" # Client cache timeout in seconds
329 nfs_server_enable="NO" # This host is an NFS server (or NO).
330 oldnfs_server_enable="NO" # Run the old NFS server (YES/NO).
331 nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
332 mountd_enable="NO" # Run mountd (or NO).
333 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
334 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
335 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
336 nfs_bufpackets="" # bufspace (in packets) for client
337 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
338 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
339 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
340 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
341 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
342 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
343 rpcbind_flags="" # Flags to rpcbind (if enabled).
344 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
345 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
346 keyserv_flags="" # Flags to keyserv (if enabled).
347 nfsv4_server_enable="NO" # Enable support for NFSv4
348 nfscbd_enable="NO" # NFSv4 client side callback daemon
349 nfscbd_flags="" # Flags for nfscbd
350 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
351 nfsuserd_flags="" # Flags for nfsuserd
353 ### Network Time Services options: ###
354 timed_enable="NO" # Run the time daemon (or NO).
355 timed_flags="" # Flags to timed (if enabled).
356 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
357 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
358 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
359 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
360 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
361 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
362 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
363 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
364 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
365 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
366 # Flags to ntpd (if enabled).
367 ntp_src_leapfile="/etc/ntp/leap-seconds"
368 # Initial source for ntpd leapfile
369 ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
370 # Working copy (updated weekly) leapfile
371 ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
372 # Source from which to fetch leapfile
373 ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch,
374 # e.g. --no-verify-peer
375 ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to
377 ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch
379 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
380 nis_client_enable="NO" # We're an NIS client (or NO).
381 nis_client_flags="" # Flags to ypbind (if enabled).
382 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
383 nis_ypset_flags="" # Flags to ypset (if enabled).
384 nis_server_enable="NO" # We're an NIS server (or NO).
385 nis_server_flags="" # Flags to ypserv (if enabled).
386 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
387 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
388 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
389 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
392 # Be sure to understand the security implications of running SNMP v1/v2
394 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
395 bsnmpd_flags="" # Flags for bsnmpd.
397 ### Network routing options: ###
398 defaultrouter="NO" # Set to default gateway (or NO).
399 static_arp_pairs="" # Set to static ARP list (or leave empty).
400 static_ndp_pairs="" # Set to static NDP list (or leave empty).
401 static_routes="" # Set to static route list (or leave empty).
402 natm_static_routes="" # Set to static route list for NATM (or leave empty).
403 gateway_enable="NO" # Set to YES if this host will be a gateway.
404 routed_enable="NO" # Set to YES to enable a routing daemon.
405 routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
406 routed_flags="-q" # Flags for routing daemon.
407 mrouted_enable="NO" # Do IPv4 multicast routing.
408 mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
409 # routing daemon. You need to
410 # install it from package or
412 mrouted_flags="" # Flags for multicast routing daemon.
413 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
414 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
415 ipxrouted_flags="" # Flags for IPX routing daemon.
416 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
417 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
418 accept_sourceroute="NO" # accept source routed packets to us
420 ### ATM interface options: ###
421 atm_enable="NO" # Configure ATM interfaces (or NO).
422 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
423 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
424 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
425 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
426 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
427 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
428 atm_pvcs="" # Set to PVC list (or leave empty).
429 atm_arps="" # Set to permanent ARP list (or leave empty).
432 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
433 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
435 sdpd_enable="NO" # Enable sdpd(8) (or NO)
436 sdpd_control="/var/run/sdp" # sdpd(8) control socket
437 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
438 sdpd_username="nobody" # it initializes
440 bthidd_enable="NO" # Enable bthidd(8) (or NO)
441 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
442 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
444 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
445 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
447 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
448 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
449 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
450 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
452 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
453 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
454 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
455 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
457 ubthidhci_enable="NO" # Switch an USB BT controller present on
458 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
459 #ubthidhci_addr="2" # Check usbconfig list to find the correct
460 # numbers for your system.
462 ### Network link/usability verification options
463 netwait_enable="NO" # Enable rc.d/netwait (or NO)
464 #netwait_ip="" # IP addresses to be pinged by netwait.
465 netwait_timeout="60" # Total number of seconds to perform pings.
466 #netwait_if="" # Interface name to watch link state on.
467 netwait_if_timeout="30" # Total number of seconds to monitor link state.
469 ### Miscellaneous network options: ###
470 icmp_bmcastecho="NO" # respond to broadcast ping packets
472 ### IPv6 options: ###
473 ipv6_network_interfaces="auto" # List of IPv6 network interfaces
474 # (or "auto" or "none").
475 ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
476 # corresponding $ifconfig_IF_ipv6 is
477 # marked as IFDISABLED for security
479 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
480 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
481 ipv6_static_routes="" # Set to static route list (or leave empty).
482 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
483 # route toward loopback interface.
484 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
485 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
486 ipv6_cpe_wanif="NO" # Set to the upstream interface name if this
487 # node will work as a router to forward IPv6
488 # packets not explicitly addressed to itself.
489 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
492 route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
493 route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
494 route6d_flags="" # Flags to IPv6 routing daemon.
495 #route6d_flags="-l" # Example for route6d with only IPv6 site local
497 #route6d_flags="-q" # If you want to run a routing daemon on an end
498 # node, you should stop advertisement.
499 #ipv6_network_interfaces="ed0 ep0" # Examples for router
500 # or static configuration for end node.
501 # Choose correct prefix value.
502 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
503 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
504 ipv6_default_interface="NO" # Default output interface for scoped addrs.
505 # This works only with
506 # ipv6_gateway_enable="NO".
507 rtsol_flags="" # Flags to IPv6 router solicitation.
508 rtsold_enable="NO" # Set to YES to enable an IPv6 router
509 # solicitation daemon.
510 rtsold_flags="-a" # Flags to an IPv6 router solicitation
512 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
513 # advertisement daemon. If set to YES,
514 # this router becomes a possible candidate
515 # IPv6 default router for local subnets.
516 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
517 mroute6d_enable="NO" # Do IPv6 multicast routing.
518 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
519 # routing daemon. You need to
520 # install it from package or
522 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
523 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
524 # tunneling interface. Specify this entry
525 # to enable 6to4 interface.
526 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
527 # to limit peer addr range. Effective value
529 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
530 # If you like, you can set "AUTO" for this.
531 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
532 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
533 # IPv6-to-IPv4 TCP translator. You also need
535 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
536 # communication. (like ::ffff:a.b.c.d)
537 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
538 # see /usr/src/contrib/ipfilter/rules
540 ip6addrctl_enable="YES" # Set to YES to enable default address selection
541 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
542 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
543 # (ipv4_prefer, ipv6_prefer, or AUTO)
545 ##############################################################
546 ### System console options #################################
547 ##############################################################
549 keyboard="" # keyboard device to use (default /dev/kbd0).
550 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
551 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
552 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
553 keychange="NO" # function keys default values (or NO).
554 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
555 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
556 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
557 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
558 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
559 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
560 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
561 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
562 # specifically overriden in rc.conf(5).
563 moused_enable="NO" # Run the mouse daemon.
564 moused_type="auto" # See man page for rc.conf(5) for available settings.
565 moused_port="/dev/psm0" # Set to your mouse port.
566 moused_flags="" # Any additional flags to moused.
567 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
568 # language code table, specify alternative range
569 # start like mousechar_start=3, see vidcontrol(1)
570 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
571 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
573 ##############################################################
574 ### Mail Transfer Agent (MTA) options ######################
575 ##############################################################
577 mta_start_script="/etc/rc.sendmail"
578 # Script to start your chosen MTA, called by /etc/rc.
579 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
580 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
581 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
582 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
583 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
584 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
585 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
586 # Flags for localhost-only MTA
587 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
588 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
589 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
590 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
591 # Flags for sendmail_msp_queue daemon.
592 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
595 ##############################################################
596 ### Miscellaneous administrative options ###################
597 ##############################################################
599 auditd_enable="NO" # Run the audit daemon.
600 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
601 auditd_flags="" # Which options to pass to the audit daemon.
602 auditdistd_enable="NO" # Run the audit daemon.
603 auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
604 auditdistd_flags="" # Which options to pass to the auditdistd daemon.
605 cron_enable="YES" # Run the periodic job daemon.
606 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
607 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
608 cron_flags="" # Which options to pass to the cron daemon.
609 lpd_enable="NO" # Run the line printer daemon.
610 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
611 lpd_flags="" # Flags to lpd (if enabled).
612 nscd_enable="NO" # Run the nsswitch caching daemon.
613 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
614 chkprintcap_flags="-d" # Create missing directories by default.
615 dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO).
616 dumpdir="/var/crash" # Directory where crash dumps are to be stored
617 savecore_flags="" # Used if dumpdev is enabled above, and present.
618 crashinfo_enable="YES" # Automatically generate crash dump summary.
619 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
620 quota_enable="NO" # turn on quotas on startup (or NO).
621 check_quotas="YES" # Check quotas on startup (or NO).
622 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
623 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
624 quotacheck_flags="-a" # Check all file system quotas (if enabled)
625 accounting_enable="NO" # Turn on process accounting (or NO).
626 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
627 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
628 firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
629 # this file exists. Should be on a R/W filesystem so
630 # the file can be deleted after the boot completes.
632 # Emulation/compatibility services provided by /etc/rc.d/abi
633 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
634 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
635 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
636 clear_tmp_enable="NO" # Clear /tmp at startup.
637 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
638 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
639 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
640 # shared library search paths
641 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
642 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
643 # a.out shared library search paths
644 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
645 # Local directories with ldconfig configuration files.
646 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
647 # Local directories with 32-bit compatibility ldconfig
648 # configuration files.
649 kern_securelevel_enable="NO" # kernel security level (see security(7))
650 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
651 # Note that setting securelevel to 0 will result
652 # in the system booting with securelevel set to 1, as
653 # init(8) will raise the level when rc(8) completes.
654 update_motd="YES" # update version info in /etc/motd (or NO)
655 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
656 # /var/db/entropy-file is preferred if / is not avail.
657 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
658 entropy_save_sz="2048" # Size of the entropy cache files.
659 entropy_save_num="8" # Number of entropy cache files to save.
660 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
661 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
662 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
663 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
664 watchdogd_enable="NO" # Start the software watchdog daemon
665 watchdogd_flags="" # Flags to watchdogd (if enabled)
666 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
668 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
669 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
670 # apply (must be mounted already, i.e. fstab(5))
671 devfs_load_rulesets="NO" # Enable to always load the default rulesets
672 performance_cx_lowest="HIGH" # Online CPU idle state
673 performance_cpu_freq="NONE" # Online CPU frequency
674 economy_cx_lowest="HIGH" # Offline CPU idle state
675 economy_cpu_freq="NONE" # Offline CPU frequency
676 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
677 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
678 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
680 newsyslog_enable="YES" # Run newsyslog at startup.
681 newsyslog_flags="-CN" # Newsyslog flags to create marked files
682 mixer_enable="YES" # Run the sound mixer.
683 opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
685 ##############################################################
686 ### Jail Configuration #######################################
687 ##############################################################
688 jail_enable="NO" # Set to NO to disable starting of any jails
689 jail_parallel_start="NO" # Start jails in the background
690 jail_list="" # Space separated list of names of jails
691 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
692 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
693 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
696 # To use rc's built-in jail infrastructure create entries for
697 # each jail, specified in jail_list, with the following variables.
699 # - replace 'example' with the jail's name.
700 # - except rootdir, hostname, ip and the _multi<n> addresses,
701 # all of the following variables may be made global jail variables
702 # if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset).
704 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
705 #jail_example_hostname="default.domain.com" # Jail's hostname
706 #jail_example_interface="" # Jail's interface variable to create IP aliases on
707 #jail_example_fib="0" # Routing table for setfib(1)
708 #jail_example_ip="192.0.2.10,2001:db8::17" # Jail's primary IPv4 and IPv6 address
709 #jail_example_ip_multi0="2001:db8::10" # and another IPv6 address
710 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
711 #jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
712 # starting the jail. More than one can be
713 # specified using a trailing number
714 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
715 #jail_example_devfs_enable="NO" # mount devfs in the jail
716 #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail -
717 # usually you want "devfsrules_jail".
718 #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
719 #jail_example_procfs_enable="NO" # mount procfs in jail
720 #jail_example_mount_enable="NO" # mount/umount jail's fs
721 #jail_example_fstab="" # fstab(5) for mount/umount
722 #jail_example_flags="-l -U root" # flags for jail(8)
723 #jail_example_parameters="allow.raw_sockets=1" # extra parameters for this jail
725 ##############################################################
726 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
727 ### scripts to source rc_conf_files overrides safely. ##
728 ##############################################################
730 if [ -z "${source_rc_confs_defined}" ]; then
731 source_rc_confs_defined=yes
733 local i sourced_files
734 for i in ${rc_conf_files}; do
735 case ${sourced_files} in
739 sourced_files="${sourced_files}:$i:"