3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="NO" # Enables display of informational messages at boot.
26 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
27 early_late_divider="FILESYSTEMS" # Script that separates early/late
28 # stages of the boot process. Make sure you know
29 # the ramifications if you change this.
30 # See rc.conf(5) for more details.
32 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
33 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
34 apmd_enable="NO" # Run apmd to handle APM event from userland.
35 apmd_flags="" # Flags to apmd (if enabled).
36 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
37 ddb_config="/etc/ddb.conf" # ddb(8) config file.
38 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
39 devd_flags="" # Additional flags for devd(8).
40 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
41 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
42 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
43 powerd_enable="NO" # Run powerd to lower our power usage.
44 powerd_flags="" # Flags to powerd (if enabled).
45 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
46 tmpsize="20m" # Size of mfs /tmp if created
47 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
48 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
49 varsize="32m" # Size of mfs /var if created
50 varmfs_flags="-S" # Extra mount options for the mfs /var
51 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
52 cleanvar_enable="YES" # Clean the /var directory
53 local_startup="/usr/local/etc/rc.d" # startup script dirs.
54 script_name_sep=" " # Change if your startup scripts' names contain spaces
55 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
58 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
60 # Experimental - test before enabling
61 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
62 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
63 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
64 gbde_lockdir="/etc" # Where to look for gbde lockfiles
66 # GELI disk encryption configuration.
67 geli_devices="" # List of devices to automatically attach in addition to
68 # GELI devices listed in /etc/fstab.
69 geli_tries="" # Number of times to attempt attaching geli device.
70 # If empty, kern.geom.eli.tries will be used.
71 geli_default_flags="" # Default flags for geli(8).
72 geli_autodetach="YES" # Automatically detach on last close.
73 # Providers are marked as such when all file systems are
76 #geli_devices="da1 mirror/home"
77 #geli_da1_flags="-p -k /etc/geli/da1.keys"
78 #geli_da1_autodetach="NO"
79 #geli_mirror_home_flags="-k /etc/geli/home.keys"
81 geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
84 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
85 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
86 fsck_y_flags="" # Additional flags for fsck -y
87 background_fsck="YES" # Attempt to run fsck in the background where possible.
88 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
89 netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
90 extra_netfs_types="NO" # List of network extra filesystem types for delayed
91 # mount at startup (or NO).
93 ##############################################################
94 ### Network configuration sub-section ######################
95 ##############################################################
97 ### Basic network and firewall/security options: ###
98 hostname="" # Set this!
99 hostid_enable="YES" # Set host UUID.
100 hostid_file="/etc/hostid" # File with hostuuid.
101 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
102 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
103 dhclient_flags="" # Extra flags to pass to dhcp client.
104 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
105 background_dhclient="NO" # Start dhcp client in the background.
106 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
107 synchronous_dhclient="NO" # Start dhclient directly on configured
108 # interfaces during startup.
109 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
110 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
111 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
112 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
114 firewall_enable="NO" # Set to YES to enable firewall functionality
115 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
116 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
117 firewall_quiet="NO" # Set to YES to suppress rule display
118 firewall_logging="NO" # Set to YES to enable events logging
119 firewall_flags="" # Flags passed to ipfw when type is a file
120 firewall_client_net="192.0.2.0/24" # Network address for "client" firewall.
121 firewall_simple_iif="ed1" # Inside network interface for "simple"
123 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
125 firewall_simple_oif="ed0" # Outside network interface for "simple"
127 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
129 firewall_myservices="" # List of TCP ports on which this host
130 # offers services for "workstation" firewall.
131 firewall_allowservices="" # List of IPs which have access to
132 # $firewall_myservices for "workstation"
134 firewall_trusted="" # List of IPs which have full access to this
135 # host for "workstation" firewall.
136 firewall_logdeny="NO" # Set to YES to log default denied incoming
137 # packets for "workstation" firewall.
138 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
139 # for which denied incoming packets are not
140 # logged for "workstation" firewall.
141 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
142 firewall_nat_interface="" # Public interface or IPaddress to use
143 firewall_nat_flags="" # Additional configuration parameters
144 dummynet_enable="NO" # Load the dummynet(4) module
145 ip_portrange_first="NO" # Set first dynamically allocated port
146 ip_portrange_last="NO" # Set last dynamically allocated port
147 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
148 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
149 ike_flags="" # Additional flags for IKE daemon
150 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
151 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
152 natd_program="/sbin/natd" # path to natd, if you want a different one.
153 natd_enable="NO" # Enable natd (if firewall_enable == YES).
154 natd_interface="" # Public interface or IPaddress to use.
155 natd_flags="" # Additional flags for natd.
156 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
157 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
158 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
159 # /usr/src/contrib/ipfilter/rules for examples
160 ipfilter_flags="" # additional flags for ipfilter
161 ipnat_enable="NO" # Set to YES to enable ipnat functionality
162 ipnat_program="/sbin/ipnat" # where the ipnat program lives
163 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
164 ipnat_flags="" # additional flags for ipnat
165 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
166 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
167 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
168 ipfs_enable="NO" # Set to YES to enable saving and restoring
169 # of state tables at shutdown and boot
170 ipfs_program="/sbin/ipfs" # where the ipfs program lives
171 ipfs_flags="" # additional flags for ipfs
172 pf_enable="NO" # Set to YES to enable packet filter (pf)
173 pf_rules="/etc/pf.conf" # rules definition file for pf
174 pf_program="/sbin/pfctl" # where the pfctl program lives
175 pf_flags="" # additional flags for pfctl
176 pflog_enable="NO" # Set to YES to enable packet filter logging
177 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
178 pflog_program="/sbin/pflogd" # where the pflogd program lives
179 pflog_flags="" # additional flags for pflogd
180 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
181 ftpproxy_flags="" # additional flags for ftp-proxy(8)
182 pfsync_enable="NO" # Expose pf state to other hosts for syncing
183 pfsync_syncdev="" # Interface for pfsync to work through
184 pfsync_syncpeer="" # IP address of pfsync peer host
185 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
186 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
187 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
188 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
189 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
190 # NOTE: this violates the TCP specification
191 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
192 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
193 network_interfaces="auto" # List of network interfaces (or "auto").
194 cloned_interfaces="" # List of cloned network interfaces to create.
195 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
196 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
197 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
198 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
199 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
200 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
201 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8)
202 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
204 #autobridge_interfaces="bridge0" # List of bridges to check
205 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
207 # If you have any sppp(4) interfaces above, you might also want to set
208 # the following parameters. Refer to spppcontrol(8) for their meaning.
209 sppp_interfaces="" # List of sppp interfaces.
210 #sppp_interfaces="...0" # example: sppp over ...
211 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
212 gif_interfaces="" # List of GIF tunnels.
213 #gif_interfaces="gif0 gif1" # Examples typically for a router.
214 # Choose correct tunnel addrs.
215 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
216 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
217 fec_interfaces="" # List of Fast EtherChannels.
218 #fec_interfaces="fec0 fec1"
219 #fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
220 #fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
222 # User ppp configuration.
223 ppp_enable="NO" # Start user-ppp (or NO).
224 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
225 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
226 # For details see man page for ppp(8). Default is auto.
227 ppp_nat="YES" # Use PPP's internal network address translation or NO.
228 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
229 ppp_user="root" # Which user to run ppp as
231 # Start multiple instances of ppp at boot time
232 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
233 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
234 #ppp_profile2_nat="NO" # Override nat mode for profile2
235 # profile3 uses default ppp_mode and ppp_nat
237 ### Network daemon (miscellaneous) ###
238 hostapd_enable="NO" # Run hostap daemon.
239 syslogd_enable="YES" # Run syslog daemon (or NO).
240 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
241 syslogd_flags="-s" # Flags to syslogd (if enabled).
242 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
243 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
244 inetd_flags="-wW -C 60" # Optional flags to inetd
246 # named. It may be possible to run named in a sandbox, man security for
249 named_enable="NO" # Run named, the DNS server (or NO).
250 named_program="/usr/sbin/named" # Path to named, if you want a different one.
251 named_conf="/etc/namedb/named.conf" # Path to the configuration file
252 #named_flags="-c /etc/namedb/named.conf" # Uncomment for named not in /usr/sbin
253 named_pidfile="/var/run/named/pid" # Must set this in named.conf as well
254 named_uid="bind" # User to run named as
255 named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
256 named_chroot_autoupdate="YES" # Automatically install/update chrooted
257 # components of named. See /etc/rc.d/named.
258 named_symlink_enable="YES" # Symlink the chrooted pid file
259 named_wait="NO" # Wait for working name service before exiting
260 named_wait_host="localhost" # Hostname to check if named_wait is enabled
261 named_auto_forward="NO" # Set up forwarders from /etc/resolv.conf
262 named_auto_forward_only="NO" # Do "forward only" instead of "forward first"
265 # kerberos. Do not run the admin daemons on slave servers
267 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
268 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
269 kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
270 kadmind5_server_enable="NO" # Run kadmind (or NO)
271 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
272 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
273 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
275 gssd_enable="NO" # Run the gssd daemon (or NO).
276 gssd_flags="" # Flags for gssd.
278 rwhod_enable="NO" # Run the rwho daemon (or NO).
279 rwhod_flags="" # Flags for rwhod
280 rarpd_enable="NO" # Run rarpd (or NO).
281 rarpd_flags="-a" # Flags to rarpd.
282 bootparamd_enable="NO" # Run bootparamd (or NO).
283 bootparamd_flags="" # Flags to bootparamd
284 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
285 pppoed_provider="*" # Provider and ppp(8) config file entry.
286 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
287 pppoed_interface="fxp0" # The interface that pppoed runs on.
288 sshd_enable="NO" # Enable sshd
289 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
290 sshd_flags="" # Additional flags for sshd.
291 ftpd_enable="NO" # Enable stand-alone ftpd.
292 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
293 ftpd_flags="" # Additional flags to stand-alone ftpd.
295 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
296 amd_enable="NO" # Run amd service with $amd_flags (or NO).
297 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
298 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
299 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
300 nfs_client_enable="NO" # This host is an NFS client (or NO).
301 nfs_access_cache="60" # Client cache timeout in seconds
302 nfs_server_enable="NO" # This host is an NFS server (or NO).
303 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
304 mountd_enable="NO" # Run mountd (or NO).
305 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
306 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
307 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
308 nfs_bufpackets="" # bufspace (in packets) for client
309 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
310 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
311 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
312 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
313 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
314 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
315 rpcbind_flags="" # Flags to rpcbind (if enabled).
316 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
317 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
318 keyserv_flags="" # Flags to keyserv (if enabled).
319 nfsv4_server_enable="NO" # Enable support for NFSv4
320 nfscbd_enable="NO" # NFSv4 client side callback daemon
321 nfscbd_flags="" # Flags for nfscbd
322 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
323 nfsuserd_flags="" # Flags for nfsuserd
325 ### Network Time Services options: ###
326 timed_enable="NO" # Run the time daemon (or NO).
327 timed_flags="" # Flags to timed (if enabled).
328 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
329 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
330 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
331 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
332 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
333 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
334 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
335 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
336 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
337 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
338 # Flags to ntpd (if enabled).
340 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
341 nis_client_enable="NO" # We're an NIS client (or NO).
342 nis_client_flags="" # Flags to ypbind (if enabled).
343 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
344 nis_ypset_flags="" # Flags to ypset (if enabled).
345 nis_server_enable="NO" # We're an NIS server (or NO).
346 nis_server_flags="" # Flags to ypserv (if enabled).
347 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
348 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
349 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
350 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
353 # Be sure to understand the security implications of running SNMP v1/v2
355 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
356 bsnmpd_flags="" # Flags for bsnmpd.
358 ### Network routing options: ###
359 defaultrouter="NO" # Set to default gateway (or NO).
360 static_routes="" # Set to static route list (or leave empty).
361 natm_static_routes="" # Set to static route list for NATM (or leave empty).
362 gateway_enable="NO" # Set to YES if this host will be a gateway.
363 router_enable="NO" # Set to YES to enable a routing daemon.
364 router="/sbin/routed" # Name of routing daemon to use if enabled.
365 router_flags="-q" # Flags for routing daemon.
366 mrouted_enable="NO" # Do IPv4 multicast routing.
367 mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
368 # routing daemon. You need to
369 # install it from package or
371 mrouted_flags="" # Flags for multicast routing daemon.
372 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
373 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
374 ipxrouted_flags="" # Flags for IPX routing daemon.
375 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
376 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
377 accept_sourceroute="NO" # accept source routed packets to us
379 ### ATM interface options: ###
380 atm_enable="NO" # Configure ATM interfaces (or NO).
381 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
382 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
383 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
384 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
385 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
386 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
387 atm_pvcs="" # Set to PVC list (or leave empty).
388 atm_arps="" # Set to permanent ARP list (or leave empty).
391 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
392 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
394 sdpd_enable="NO" # Enable sdpd(8) (or NO)
395 sdpd_control="/var/run/sdp" # sdpd(8) control socket
396 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
397 sdpd_username="nobody" # it initializes
399 bthidd_enable="NO" # Enable bthidd(8) (or NO)
400 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
401 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
403 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
404 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
406 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
407 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
408 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
409 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
411 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
412 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
413 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
414 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
416 ### Miscellaneous network options: ###
417 icmp_bmcastecho="NO" # respond to broadcast ping packets
419 ### IPv6 options: ###
420 ipv6_enable="NO" # Set to YES to set up for IPv6.
421 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
422 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
423 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
424 ipv6_static_routes="" # Set to static route list (or leave empty).
425 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
426 # route toward loopback interface.
427 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
428 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
429 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
430 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
431 ipv6_router_flags="" # Flags to IPv6 routing daemon.
432 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
434 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
435 # node, you should stop advertisement.
436 #ipv6_network_interfaces="ed0 ep0" # Examples for router
437 # or static configuration for end node.
438 # Choose correct prefix value.
439 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
440 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
441 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
442 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
443 ipv6_default_interface="NO" # Default output interface for scoped addrs.
444 # Now this works only for IPv6 link local
446 rtsol_flags="" # Flags to IPv6 router solicitation.
447 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
448 # advertisement daemon. If set to YES,
449 # this router becomes a possible candidate
450 # IPv6 default router for local subnets.
451 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
452 mroute6d_enable="NO" # Do IPv6 multicast routing.
453 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
454 # routing daemon. You need to
455 # install it from package or
457 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
458 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
459 # tunneling interface. Specify this entry
460 # to enable 6to4 interface.
461 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
462 # to limit peer addr range. Effective value
464 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
465 # If you like, you can set "AUTO" for this.
466 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
467 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
468 # IPv6-to-IPv4 TCP translator. You also need
470 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
471 # communication. (like ::ffff:a.b.c.d)
472 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
474 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
475 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
476 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
477 ipv6_firewall_logging="NO" # Set to YES to enable events logging
478 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
479 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
480 # see /usr/src/contrib/ipfilter/rules
482 ip6addrctl_enable="YES" # Set to YES to enable default address selection
483 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
485 ##############################################################
486 ### System console options #################################
487 ##############################################################
489 keyboard="" # keyboard device to use (default /dev/kbd0).
490 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
491 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
492 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
493 keychange="NO" # function keys default values (or NO).
494 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
495 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
496 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
497 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
498 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
499 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
500 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
501 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
502 # specifically overriden in rc.conf(5).
503 moused_enable="NO" # Run the mouse daemon.
504 moused_type="auto" # See man page for rc.conf(5) for available settings.
505 moused_port="/dev/psm0" # Set to your mouse port.
506 moused_flags="" # Any additional flags to moused.
507 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
508 # language code table, specify alternative range
509 # start like mousechar_start=3, see vidcontrol(1)
510 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
511 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
513 ##############################################################
514 ### Mail Transfer Agent (MTA) options ######################
515 ##############################################################
517 mta_start_script="/etc/rc.sendmail"
518 # Script to start your chosen MTA, called by /etc/rc.
519 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
520 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
521 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
522 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
523 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
524 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
525 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
526 # Flags for localhost-only MTA
527 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
528 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
529 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
530 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
531 # Flags for sendmail_msp_queue daemon.
532 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
535 ##############################################################
536 ### Miscellaneous administrative options ###################
537 ##############################################################
539 auditd_enable="NO" # Run the audit daemon.
540 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
541 auditd_flags="" # Which options to pass to the audit daemon.
542 cron_enable="YES" # Run the periodic job daemon.
543 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
544 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
545 cron_flags="" # Which options to pass to the cron daemon.
546 lpd_enable="NO" # Run the line printer daemon.
547 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
548 lpd_flags="" # Flags to lpd (if enabled).
549 nscd_enable="NO" # Run the nsswitch caching daemon.
550 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
551 chkprintcap_flags="-d" # Create missing directories by default.
552 dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO).
553 dumpdir="/var/crash" # Directory where crash dumps are to be stored
554 savecore_flags="" # Used if dumpdev is enabled above, and present.
555 crashinfo_enable="YES" # Automatically generate crash dump summary.
556 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
557 quota_enable="NO" # turn on quotas on startup (or NO).
558 check_quotas="YES" # Check quotas on startup (or NO).
559 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
560 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
561 quotacheck_flags="-a" # Check all file system quotas (if enabled)
562 accounting_enable="NO" # Turn on process accounting (or NO).
563 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
564 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
566 # Emulation/compatibility services provided by /etc/rc.d/abi
567 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
568 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
569 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
570 clear_tmp_enable="NO" # Clear /tmp at startup.
571 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
572 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
573 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
574 # shared library search paths
575 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
576 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
577 # a.out shared library search paths
578 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
579 # Local directories with ldconfig configuration files.
580 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
581 # Local directories with 32-bit compatibility ldconfig
582 # configuration files.
583 kern_securelevel_enable="NO" # kernel security level (see security(7))
584 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
585 # Note that setting securelevel to 0 will result
586 # in the system booting with securelevel set to 1, as
587 # init(8) will raise the level when rc(8) completes.
588 update_motd="YES" # update version info in /etc/motd (or NO)
589 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
590 # /var/db/entropy-file is preferred if / is not avail.
591 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
592 entropy_save_sz="2048" # Size of the entropy cache files.
593 entropy_save_num="8" # Number of entropy cache files to save.
594 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
595 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
596 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
597 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
598 watchdogd_enable="NO" # Start the software watchdog daemon
599 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
601 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
602 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
603 # apply (must be mounted already, i.e. fstab(5))
604 performance_cx_lowest="HIGH" # Online CPU idle state
605 performance_cpu_freq="NONE" # Online CPU frequency
606 economy_cx_lowest="HIGH" # Offline CPU idle state
607 economy_cpu_freq="NONE" # Offline CPU frequency
608 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
609 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
610 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
612 newsyslog_enable="YES" # Run newsyslog at startup.
613 newsyslog_flags="-CN" # Newsyslog flags to create marked files
614 mixer_enable="YES" # Run the sound mixer.
616 ##############################################################
617 ### Jail Configuration #######################################
618 ##############################################################
619 jail_enable="NO" # Set to NO to disable starting of any jails
620 jail_list="" # Space separated list of names of jails
621 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
622 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
623 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
626 # To use rc's built-in jail infrastructure create entries for
627 # each jail, specified in jail_list, with the following variables.
629 # - replace 'example' with the jail's name.
630 # - except rootdir, hostname, ip and the _multi<n> addresses,
631 # all of the following variables may be made global jail variables
632 # if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset).
634 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
635 #jail_example_hostname="default.domain.com" # Jail's hostname
636 #jail_example_interface="" # Jail's interface variable to create IP aliases on
637 #jail_example_fib="0" # Routing table for setfib(1)
638 #jail_example_ip="192.0.2.10,2001:db8::17" # Jail's primary IPv4 and IPv6 address
639 #jail_example_ip_multi0="2001:db8::10" # and another IPv6 address
640 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
641 #jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
642 # starting the jail. More than one can be
643 # specified using a trailing number
644 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
645 #jail_example_devfs_enable="NO" # mount devfs in the jail
646 #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail -
647 # usually you want "devfsrules_jail".
648 #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
649 #jail_example_procfs_enable="NO" # mount procfs in jail
650 #jail_example_mount_enable="NO" # mount/umount jail's fs
651 #jail_example_fstab="" # fstab(5) for mount/umount
652 #jail_example_flags="-l -U root" # flags for jail(8)
654 ##############################################################
655 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
656 ### scripts to source rc_conf_files overrides safely. ##
657 ##############################################################
659 if [ -z "${source_rc_confs_defined}" ]; then
660 source_rc_confs_defined=yes
662 local i sourced_files
663 for i in ${rc_conf_files}; do
664 case ${sourced_files} in
668 sourced_files="${sourced_files}:$i:"