]> CyberLeo.Net >> Repos - FreeBSD/stable/8.git/blob - etc/defaults/rc.conf
MFC r203433:
[FreeBSD/stable/8.git] / etc / defaults / rc.conf
1 #!/bin/sh
2
3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system.  You should
5 # not edit this file!  Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
8 #
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file.  This eases the upgrade path when defaults
11 # are changed and new features are added.
12 #
13 # All arguments must be in double or single quotes.
14 #
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
17 #
18 # $FreeBSD$
19
20 ##############################################################
21 ###  Important initial Boot-time options  ####################
22 ##############################################################
23
24 rc_debug="NO"           # Set to YES to enable debugging output from rc.d
25 rc_info="NO"            # Enables display of informational messages at boot.
26 rc_startmsgs="YES"      # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
28 early_late_divider="FILESYSTEMS"        # Script that separates early/late
29                         # stages of the boot process.  Make sure you know
30                         # the ramifications if you change this.
31                         # See rc.conf(5) for more details.
32
33 swapfile="NO"           # Set to name of swapfile if aux swapfile desired.
34 apm_enable="NO"         # Set to YES to enable APM BIOS functions (or NO).
35 apmd_enable="NO"        # Run apmd to handle APM event from userland.
36 apmd_flags=""           # Flags to apmd (if enabled).
37 ddb_enable="NO"         # Set to YES to load ddb scripts at boot.
38 ddb_config="/etc/ddb.conf"      # ddb(8) config file.
39 devd_enable="YES"       # Run devd, to trigger programs on device tree changes.
40 devd_flags=""           # Additional flags for devd(8).
41 kldxref_enable="NO"     # Build linker.hints files with kldxref(8).
42 kldxref_clobber="NO"    # Overwrite old linker.hints at boot.
43 kldxref_module_path=""  # Override kern.module_path. A ';'-delimited list.
44 powerd_enable="NO"      # Run powerd to lower our power usage.
45 powerd_flags=""         # Flags to powerd (if enabled).
46 tmpmfs="AUTO"           # Set to YES to always create an mfs /tmp, NO to never
47 tmpsize="20m"           # Size of mfs /tmp if created
48 tmpmfs_flags="-S"       # Extra mdmfs options for the mfs /tmp
49 varmfs="AUTO"           # Set to YES to always create an mfs /var, NO to never
50 varsize="32m"           # Size of mfs /var if created
51 varmfs_flags="-S"       # Extra mount options for the mfs /var
52 populate_var="AUTO"     # Set to YES to always (re)populate /var, NO to never
53 cleanvar_enable="YES"   # Clean the /var directory
54 local_startup="/usr/local/etc/rc.d" # startup script dirs.
55 script_name_sep=" "     # Change if your startup scripts' names contain spaces
56 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
57
58 # ZFS support
59 zfs_enable="NO"         # Set to YES to automatically mount ZFS file systems
60
61 # Experimental - test before enabling
62 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
63 gbde_devices="NO"       # Devices to automatically attach (list, or AUTO)
64 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
65 gbde_lockdir="/etc"     # Where to look for gbde lockfiles
66
67 # GELI disk encryption configuration.
68 geli_devices=""         # List of devices to automatically attach in addition to
69                         # GELI devices listed in /etc/fstab.
70 geli_tries=""           # Number of times to attempt attaching geli device.
71                         # If empty, kern.geom.eli.tries will be used.
72 geli_default_flags=""   # Default flags for geli(8).
73 geli_autodetach="YES"   # Automatically detach on last close.
74                         # Providers are marked as such when all file systems are
75                         # mounted.
76 # Example use.
77 #geli_devices="da1 mirror/home"
78 #geli_da1_flags="-p -k /etc/geli/da1.keys"
79 #geli_da1_autodetach="NO"
80 #geli_mirror_home_flags="-k /etc/geli/home.keys"
81
82 geli_swap_flags="-e aes -l 256 -s 4096 -d"      # Options for GELI-encrypted
83                                                 # swap partitions.
84
85 root_rw_mount="YES"     # Set to NO to inhibit remounting root read-write.
86 fsck_y_enable="NO"      # Set to YES to do fsck -y if the initial preen fails.
87 fsck_y_flags=""         # Additional flags for fsck -y
88 background_fsck="YES"   # Attempt to run fsck in the background where possible.
89 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
90 netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
91 extra_netfs_types="NO"  # List of network extra filesystem types for delayed
92                         # mount at startup (or NO).
93
94 ##############################################################
95 ###  Network configuration sub-section  ######################
96 ##############################################################
97
98 ### Basic network and firewall/security options: ###
99 hostname=""                     # Set this!
100 hostid_enable="YES"             # Set host UUID.
101 hostid_file="/etc/hostid"       # File with hostuuid.
102 nisdomainname="NO"              # Set to NIS domain if using NIS (or NO).
103 dhclient_program="/sbin/dhclient"       # Path to dhcp client program.
104 dhclient_flags=""               # Extra flags to pass to dhcp client.
105 #dhclient_flags_fxp0=""         # Extra dhclient flags for fxp0 only
106 background_dhclient="NO"        # Start dhcp client in the background.
107 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
108 synchronous_dhclient="NO"       # Start dhclient directly on configured
109                                 # interfaces during startup.
110 defaultroute_delay="30"         # Time to wait for a default route on a DHCP interface.
111 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
112 wpa_supplicant_flags="-s"       # Extra flags to pass to wpa_supplicant
113 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
114 #
115 firewall_enable="NO"            # Set to YES to enable firewall functionality
116 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
117 firewall_type="UNKNOWN"         # Firewall type (see /etc/rc.firewall)
118 firewall_quiet="NO"             # Set to YES to suppress rule display
119 firewall_logging="NO"           # Set to YES to enable events logging
120 firewall_flags=""               # Flags passed to ipfw when type is a file
121 firewall_coscripts=""           # List of executables/scripts to run after
122                                 # firewall starts/stops
123 firewall_client_net="192.0.2.0/24" # Network address for "client" firewall.
124 firewall_simple_iif="ed1"       # Inside network interface for "simple"
125                                 # firewall.
126 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
127                                 # firewall.
128 firewall_simple_oif="ed0"       # Outside network interface for "simple"
129                                 # firewall.
130 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
131                                 # firewall.
132 firewall_myservices=""          # List of TCP ports on which this host
133                                 # offers services for "workstation" firewall.
134 firewall_allowservices=""       # List of IPs which have access to
135                                 # $firewall_myservices for "workstation"
136                                 # firewall.
137 firewall_trusted=""             # List of IPs which have full access to this
138                                 # host for "workstation" firewall.
139 firewall_logdeny="NO"           # Set to YES to log default denied incoming
140                                 # packets for "workstation" firewall.
141 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
142                                 # for which denied incoming packets are not
143                                 # logged for "workstation" firewall.
144 firewall_nat_enable="NO"        # Enable kernel NAT (if firewall_enable == YES)
145 firewall_nat_interface=""       # Public interface or IPaddress to use
146 firewall_nat_flags=""           # Additional configuration parameters
147 dummynet_enable="NO"            # Load the dummynet(4) module
148 ip_portrange_first="NO"         # Set first dynamically allocated port
149 ip_portrange_last="NO"          # Set last dynamically allocated port
150 ike_enable="NO"                 # Enable IKE daemon (usually racoon or isakmpd)
151 ike_program="/usr/local/sbin/isakmpd"   # Path to IKE daemon
152 ike_flags=""                    # Additional flags for IKE daemon
153 ipsec_enable="NO"               # Set to YES to run setkey on ipsec_file
154 ipsec_file="/etc/ipsec.conf"    # Name of config file for setkey
155 natd_program="/sbin/natd"       # path to natd, if you want a different one.
156 natd_enable="NO"                # Enable natd (if firewall_enable == YES).
157 natd_interface=""               # Public interface or IPaddress to use.
158 natd_flags=""                   # Additional flags for natd.
159 ipfilter_enable="NO"            # Set to YES to enable ipfilter functionality
160 ipfilter_program="/sbin/ipf"    # where the ipfilter program lives
161 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
162                                 # /usr/src/contrib/ipfilter/rules for examples
163 ipfilter_flags=""               # additional flags for ipfilter
164 ipnat_enable="NO"               # Set to YES to enable ipnat functionality
165 ipnat_program="/sbin/ipnat"     # where the ipnat program lives
166 ipnat_rules="/etc/ipnat.rules"  # rules definition file for ipnat
167 ipnat_flags=""                  # additional flags for ipnat
168 ipmon_enable="NO"               # Set to YES for ipmon; needs ipfilter or ipnat
169 ipmon_program="/sbin/ipmon"     # where the ipfilter monitor program lives
170 ipmon_flags="-Ds"               # typically "-Ds" or "-D /var/log/ipflog"
171 ipfs_enable="NO"                # Set to YES to enable saving and restoring
172                                 # of state tables at shutdown and boot
173 ipfs_program="/sbin/ipfs"       # where the ipfs program lives
174 ipfs_flags=""                   # additional flags for ipfs
175 pf_enable="NO"                  # Set to YES to enable packet filter (pf)
176 pf_rules="/etc/pf.conf"         # rules definition file for pf
177 pf_program="/sbin/pfctl"        # where the pfctl program lives
178 pf_flags=""                     # additional flags for pfctl
179 pflog_enable="NO"               # Set to YES to enable packet filter logging
180 pflog_logfile="/var/log/pflog"  # where pflogd should store the logfile
181 pflog_program="/sbin/pflogd"    # where the pflogd program lives
182 pflog_flags=""                  # additional flags for pflogd
183 ftpproxy_enable="NO"            # Set to YES to enable ftp-proxy(8) for pf
184 ftpproxy_flags=""               # additional flags for ftp-proxy(8)
185 pfsync_enable="NO"              # Expose pf state to other hosts for syncing
186 pfsync_syncdev=""               # Interface for pfsync to work through
187 pfsync_syncpeer=""              # IP address of pfsync peer host
188 pfsync_ifconfig=""              # Additional options to ifconfig(8) for pfsync
189 tcp_extensions="YES"            # Set to NO to turn off RFC1323 extensions.
190 log_in_vain="0"                 # >=1 to log connects to ports w/o listeners.
191 tcp_keepalive="YES"             # Enable stale TCP connection timeout (or NO).
192 tcp_drop_synfin="NO"            # Set to YES to drop TCP packets with SYN+FIN
193                                 # NOTE: this violates the TCP specification
194 icmp_drop_redirect="NO"         # Set to YES to ignore ICMP REDIRECT packets
195 icmp_log_redirect="NO"          # Set to YES to log ICMP REDIRECT packets
196 network_interfaces="auto"       # List of network interfaces (or "auto").
197 cloned_interfaces=""            # List of cloned network interfaces to create.
198 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
199 ifconfig_lo0="inet 127.0.0.1"   # default loopback device configuration.
200 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
201 #ifconfig_ed0_ipx="ipx 0x00010010"      # Sample IPX address family entry.
202 #ifconfig_fxp0_name="net0"      # Change interface name from fxp0 to net0.
203 #vlans_fxp0="101 vlan0"         # vlan(4) interfaces for fxp0 device
204 #create_arg_vlan0="vlan 102"    # vlan tag for vlan0 device
205 #wlans_ath0="wlan0"             # wlan(4) interfaces for ath0 device
206 #wlandebug_wlan0="scan+auth+assoc"      # Set debug flags with wlanddebug(8)
207 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
208 #
209 #autobridge_interfaces="bridge0"        # List of bridges to check 
210 #autobridge_bridge0="tap* vlan0"        # Interface glob to automatically add to the bridge
211 #
212 # If you have any sppp(4) interfaces above, you might also want to set
213 # the following parameters.  Refer to spppcontrol(8) for their meaning.
214 sppp_interfaces=""              # List of sppp interfaces.
215 #sppp_interfaces="...0"         # example: sppp over ...
216 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
217 gif_interfaces=""               # List of GIF tunnels.
218 #gif_interfaces="gif0 gif1"     # Examples typically for a router.
219                                 # Choose correct tunnel addrs.
220 #gifconfig_gif0="10.1.1.1 10.1.2.1"     # Examples typically for a router.
221 #gifconfig_gif1="10.1.1.2 10.1.2.2"     # Examples typically for a router.
222 fec_interfaces=""               # List of Fast EtherChannels.
223 #fec_interfaces="fec0 fec1"
224 #fecconfig_fec0="fxp0 dc0"      # Examples typically for two NICs
225 #fecconfig_fec1="em0 em1 bge0 bge1"     # Examples typically for four NICs
226
227 # User ppp configuration.
228 ppp_enable="NO"         # Start user-ppp (or NO).
229 ppp_program="/usr/sbin/ppp"     # Path to user-ppp program.
230 ppp_mode="auto"         # Choice of "auto", "ddial", "direct" or "dedicated".
231                         # For details see man page for ppp(8). Default is auto.
232 ppp_nat="YES"           # Use PPP's internal network address translation or NO.
233 ppp_profile="papchap"   # Which profile to use from /etc/ppp/ppp.conf.
234 ppp_user="root"         # Which user to run ppp as
235
236 # Start multiple instances of ppp at boot time
237 #ppp_profile="profile1 profile2 profile3"       # Which profiles to use
238 #ppp_profile1_mode="ddial"      # Override ppp mode for profile1
239 #ppp_profile2_nat="NO"          # Override nat mode for profile2
240 # profile3 uses default ppp_mode and ppp_nat
241
242 ### Network daemon (miscellaneous) ###
243 hostapd_enable="NO"             # Run hostap daemon.
244 syslogd_enable="YES"            # Run syslog daemon (or NO).
245 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
246 syslogd_flags="-s"              # Flags to syslogd (if enabled).
247 inetd_enable="NO"               # Run the network daemon dispatcher (YES/NO).
248 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
249 inetd_flags="-wW -C 60"         # Optional flags to inetd
250 #
251 # named.  It may be possible to run named in a sandbox, man security for
252 # details.
253 #
254 named_enable="NO"               # Run named, the DNS server (or NO).
255 named_program="/usr/sbin/named" # Path to named, if you want a different one.
256 named_conf="/etc/namedb/named.conf"     # Path to the configuration file
257 #named_flags=""                 # Use this for flags OTHER than -u and -c
258 named_pidfile="/var/run/named/pid" # Must set this in named.conf as well
259 named_uid="bind"                # User to run named as
260 named_chrootdir="/var/named"    # Chroot directory (or "" not to auto-chroot it)
261 named_chroot_autoupdate="YES"   # Automatically install/update chrooted
262                                 # components of named. See /etc/rc.d/named.
263 named_symlink_enable="YES"      # Symlink the chrooted pid file
264 named_wait="NO"                 # Wait for working name service before exiting
265 named_wait_host="localhost"     # Hostname to check if named_wait is enabled
266 named_auto_forward="NO"         # Set up forwarders from /etc/resolv.conf
267 named_auto_forward_only="NO"    # Do "forward only" instead of "forward first"
268
269 #
270 # kerberos. Do not run the admin daemons on slave servers
271 #
272 kerberos5_server_enable="NO"    # Run a kerberos 5 master server (or NO).
273 kerberos5_server="/usr/libexec/kdc"     # path to kerberos 5 KDC
274 kerberos5_server_flags="--detach"       # Additional flags to the kerberos 5 server
275 kadmind5_server_enable="NO"     # Run kadmind (or NO)
276 kadmind5_server="/usr/libexec/kadmind"  # path to kerberos 5 admin daemon
277 kpasswdd_server_enable="NO"     # Run kpasswdd (or NO)
278 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
279
280 gssd_enable="NO"                # Run the gssd daemon (or NO).
281 gssd_flags=""                   # Flags for gssd.
282
283 rwhod_enable="NO"               # Run the rwho daemon (or NO).
284 rwhod_flags=""                  # Flags for rwhod
285 rarpd_enable="NO"               # Run rarpd (or NO).
286 rarpd_flags="-a"                # Flags to rarpd.
287 bootparamd_enable="NO"          # Run bootparamd (or NO).
288 bootparamd_flags=""             # Flags to bootparamd
289 pppoed_enable="NO"              # Run the PPP over Ethernet daemon.
290 pppoed_provider="*"             # Provider and ppp(8) config file entry.
291 pppoed_flags="-P /var/run/pppoed.pid"   # Flags to pppoed (if enabled).
292 pppoed_interface="fxp0"         # The interface that pppoed runs on.
293 sshd_enable="NO"                # Enable sshd
294 sshd_program="/usr/sbin/sshd"   # path to sshd, if you want a different one.
295 sshd_flags=""                   # Additional flags for sshd.
296 ftpd_enable="NO"                # Enable stand-alone ftpd.
297 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
298 ftpd_flags=""                   # Additional flags to stand-alone ftpd.
299
300 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
301 amd_enable="NO"                 # Run amd service with $amd_flags (or NO).
302 amd_program="/usr/sbin/amd"     # path to amd, if you want a different one.
303 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
304 amd_map_program="NO"            # Can be set to "ypcat -k amd.master"
305 nfs_client_enable="NO"          # This host is an NFS client (or NO).
306 nfs_access_cache="60"           # Client cache timeout in seconds
307 nfs_server_enable="NO"          # This host is an NFS server (or NO).
308 nfs_server_flags="-u -t -n 4"   # Flags to nfsd (if enabled).
309 mountd_enable="NO"              # Run mountd (or NO).
310 mountd_flags="-r"               # Flags to mountd (if NFS server enabled).
311 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
312 nfs_reserved_port_only="NO"     # Provide NFS only on secure port (or NO).
313 nfs_bufpackets=""               # bufspace (in packets) for client
314 rpc_lockd_enable="NO"           # Run NFS rpc.lockd needed for client/server.
315 rpc_lockd_flags=""              # Flags to rpc.lockd (if enabled).
316 rpc_statd_enable="NO"           # Run NFS rpc.statd needed for client/server.
317 rpc_statd_flags=""              # Flags to rpc.statd (if enabled).
318 rpcbind_enable="NO"             # Run the portmapper service (YES/NO).
319 rpcbind_program="/usr/sbin/rpcbind"     # path to rpcbind, if you want a different one.
320 rpcbind_flags=""                # Flags to rpcbind (if enabled).
321 rpc_ypupdated_enable="NO"       # Run if NIS master and SecureRPC (or NO).
322 keyserv_enable="NO"             # Run the SecureRPC keyserver (or NO).
323 keyserv_flags=""                # Flags to keyserv (if enabled).
324 nfsv4_server_enable="NO"        # Enable support for NFSv4
325 nfscbd_enable="NO"              # NFSv4 client side callback daemon
326 nfscbd_flags=""                 # Flags for nfscbd
327 nfsuserd_enable="NO"            # NFSv4 user/group name mapping daemon
328 nfsuserd_flags=""               # Flags for nfsuserd
329
330 ### Network Time Services options: ###
331 timed_enable="NO"               # Run the time daemon (or NO).
332 timed_flags=""                  # Flags to timed (if enabled).
333 ntpdate_enable="NO"             # Run ntpdate to sync time on boot (or NO).
334 ntpdate_program="/usr/sbin/ntpdate"     # path to ntpdate, if you want a different one.
335 ntpdate_flags="-b"              # Flags to ntpdate (if enabled).
336 ntpdate_config="/etc/ntp.conf"  # ntpdate(8) configuration file
337 ntpdate_hosts=""                # Whitespace-separated list of ntpdate(8) servers.
338 ntpd_enable="NO"                # Run ntpd Network Time Protocol (or NO).
339 ntpd_program="/usr/sbin/ntpd"   # path to ntpd, if you want a different one.
340 ntpd_config="/etc/ntp.conf"     # ntpd(8) configuration file
341 ntpd_sync_on_start="NO"         # Sync time on ntpd startup, even if offset is high
342 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
343                                 # Flags to ntpd (if enabled).
344
345 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
346 nis_client_enable="NO"          # We're an NIS client (or NO).
347 nis_client_flags=""             # Flags to ypbind (if enabled).
348 nis_ypset_enable="NO"           # Run ypset at boot time (or NO).
349 nis_ypset_flags=""              # Flags to ypset (if enabled).
350 nis_server_enable="NO"          # We're an NIS server (or NO).
351 nis_server_flags=""             # Flags to ypserv (if enabled).
352 nis_ypxfrd_enable="NO"          # Run rpc.ypxfrd at boot time (or NO).
353 nis_ypxfrd_flags=""             # Flags to rpc.ypxfrd (if enabled).
354 nis_yppasswdd_enable="NO"       # Run rpc.yppasswdd at boot time (or NO).
355 nis_yppasswdd_flags=""          # Flags to rpc.yppasswdd (if enabled).
356
357 ### SNMP daemon ###
358 # Be sure to understand the security implications of running SNMP v1/v2
359 # in your network.
360 bsnmpd_enable="NO"              # Run the SNMP daemon (or NO).
361 bsnmpd_flags=""                 # Flags for bsnmpd.
362
363 ### Network routing options: ###
364 defaultrouter="NO"              # Set to default gateway (or NO).
365 static_arp_pairs=""             # Set to static ARP list (or leave empty).
366 static_routes=""                # Set to static route list (or leave empty).
367 natm_static_routes=""           # Set to static route list for NATM (or leave empty).
368 gateway_enable="NO"             # Set to YES if this host will be a gateway.
369 router_enable="NO"              # Set to YES to enable a routing daemon.
370 router="/sbin/routed"           # Name of routing daemon to use if enabled.
371 router_flags="-q"               # Flags for routing daemon.
372 mrouted_enable="NO"             # Do IPv4 multicast routing.
373 mrouted_program="/usr/local/sbin/mrouted"       # Name of IPv4 multicast
374                                                 # routing daemon.  You need to
375                                                 # install it from package or
376                                                 # port.
377 mrouted_flags=""                # Flags for multicast routing daemon.
378 ipxgateway_enable="NO"          # Set to YES to enable IPX routing.
379 ipxrouted_enable="NO"           # Set to YES to run the IPX routing daemon.
380 ipxrouted_flags=""              # Flags for IPX routing daemon.
381 arpproxy_all="NO"               # replaces obsolete kernel option ARP_PROXYALL.
382 forward_sourceroute="NO"        # do source routing (only if gateway_enable is set to "YES")
383 accept_sourceroute="NO"         # accept source routed packets to us
384
385 ### ATM interface options: ###
386 atm_enable="NO"                 # Configure ATM interfaces (or NO).
387 #atm_netif_hea0="atm 1"         # Network interfaces for physical interface.
388 #atm_sigmgr_hea0="uni31"        # Signalling manager for physical interface.
389 #atm_prefix_hea0="ILMI"         # NSAP prefix (UNI interfaces only) (or ILMI).
390 #atm_macaddr_hea0="NO"          # Override physical MAC address (or NO).
391 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
392 #atm_scsparp_atm0="NO"          # Run SCSP/ATMARP on network interface (or NO).
393 atm_pvcs=""                     # Set to PVC list (or leave empty).
394 atm_arps=""                     # Set to permanent ARP list (or leave empty).
395
396 ### Bluetooth ###
397 hcsecd_enable="NO"              # Enable hcsecd(8) (or NO)
398 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
399
400 sdpd_enable="NO"                # Enable sdpd(8) (or NO)
401 sdpd_control="/var/run/sdp"     # sdpd(8) control socket
402 sdpd_groupname="nobody"         # set spdp(8) user/group to run as after
403 sdpd_username="nobody"          # it initializes
404
405 bthidd_enable="NO"              # Enable bthidd(8) (or NO)
406 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
407 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
408
409 rfcomm_pppd_server_enable="NO"  # Enable rfcomm_pppd(8) in server mode (or NO)
410 rfcomm_pppd_server_profile="one two"    # Profile to use from /etc/ppp/ppp.conf
411 #
412 #rfcomm_pppd_server_one_bdaddr=""       # Override local bdaddr for 'one'
413 rfcomm_pppd_server_one_channel="1"      # Override local channel for 'one'
414 #rfcomm_pppd_server_one_register_sp="NO"        # Override SP and DUN register
415 #rfcomm_pppd_server_one_register_dun="NO"       # for 'one'
416 #
417 #rfcomm_pppd_server_two_bdaddr=""       # Override local bdaddr for 'two'
418 rfcomm_pppd_server_two_channel="3"      # Override local channel for 'two'
419 #rfcomm_pppd_server_two_register_sp="NO"        # Override SP and DUN register
420 #rfcomm_pppd_server_two_register_dun="NO"       # for 'two'
421
422 ### Miscellaneous network options: ###
423 icmp_bmcastecho="NO"    # respond to broadcast ping packets
424
425 ### IPv6 options: ###
426 ipv6_enable="NO"                # Set to YES to set up for IPv6.
427 ipv6_network_interfaces="auto"  # List of network interfaces (or "auto").
428 ipv6_defaultrouter="NO"         # Set to IPv6 default gateway (or NO).
429 #ipv6_defaultrouter="2002:c058:6301::"  # Use this for 6to4 (RFC 3068)
430 ipv6_static_routes=""           # Set to static route list (or leave empty).
431 #ipv6_static_routes="xxx"       # An example to set fec0:0000:0000:0006::/64
432                                 #  route toward loopback interface.
433 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
434 ipv6_gateway_enable="NO"        # Set to YES if this host will be a gateway.
435 ipv6_router_enable="NO"         # Set to YES to enable an IPv6 routing daemon.
436 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
437 ipv6_router_flags=""            # Flags to IPv6 routing daemon.
438 #ipv6_router_flags="-l"         # Example for route6d with only IPv6 site local
439                                 # addrs.
440 #ipv6_router_flags="-q"         # If you want to run a routing daemon on an end
441                                 # node, you should stop advertisement.
442 #ipv6_network_interfaces="ed0 ep0"      # Examples for router
443                                         # or static configuration for end node.
444                                         # Choose correct prefix value.
445 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
446 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
447 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
448 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
449 ipv6_default_interface="NO"     # Default output interface for scoped addrs.
450                                 # Now this works only for IPv6 link local
451                                 # multicast addrs.
452 rtsol_flags=""                  # Flags to IPv6 router solicitation.
453 rtsold_enable="NO"              # Set to YES to enable an IPv6 router
454                                 # solicitation daemon.
455 rtsold_flags="-a"               # Flags to an IPv6 router solicitation
456                                 # daemon.
457 rtadvd_enable="NO"              # Set to YES to enable an IPv6 router
458                                 # advertisement daemon. If set to YES,
459                                 # this router becomes a possible candidate
460                                 # IPv6 default router for local subnets.
461 rtadvd_interfaces=""            # Interfaces rtadvd sends RA packets.
462 mroute6d_enable="NO"            # Do IPv6 multicast routing.
463 mroute6d_program="/usr/local/sbin/pim6dd"       # Name of IPv6 multicast
464                                                 # routing daemon.  You need to
465                                                 # install it from package or
466                                                 # port.
467 mroute6d_flags=""               # Flags to IPv6 multicast routing daemon.
468 stf_interface_ipv4addr=""       # Local IPv4 addr for 6to4 IPv6 over IPv4
469                                 # tunneling interface. Specify this entry
470                                 # to enable 6to4 interface.
471 stf_interface_ipv4plen="0"      # Prefix length for 6to4 IPv4 addr,
472                                 # to limit peer addr range. Effective value
473                                 # is 0-31.
474 stf_interface_ipv6_ifid="0:0:0:1"       # IPv6 interface id for stf0.
475                                 # If you like, you can set "AUTO" for this.
476 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
477 ipv6_faith_prefix="NO"          # Set faith prefix to enable a FAITH
478                                 # IPv6-to-IPv4 TCP translator.  You also need
479                                 # faithd(8) setup.
480 ipv6_ipv4mapping="NO"           # Set to "YES" to enable IPv4 mapped IPv6 addr
481                                 # communication. (like ::ffff:a.b.c.d)
482 ipv6_firewall_enable="NO"       # Set to YES to enable IPv6 firewall
483                                 # functionality
484 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
485 ipv6_firewall_type="UNKNOWN"    # IPv6 Firewall type (see /etc/rc.firewall6)
486 ipv6_firewall_quiet="NO"        # Set to YES to suppress rule display
487 ipv6_firewall_logging="NO"      # Set to YES to enable events logging
488 ipv6_firewall_flags=""          # Flags passed to ip6fw when type is a file
489 ipv6_ipfilter_rules="/etc/ipf6.rules"   # rules definition file for ipfilter,
490                                         # see /usr/src/contrib/ipfilter/rules
491                                         # for examples
492 ip6addrctl_enable="YES" # Set to YES to enable default address selection
493 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
494
495 ##############################################################
496 ###  System console options  #################################
497 ##############################################################
498
499 keyboard=""             # keyboard device to use (default /dev/kbd0).
500 keymap="NO"             # keymap in /usr/share/syscons/keymaps/* (or NO).
501 keyrate="NO"            # keyboard rate to: slow, normal, fast (or NO).
502 keybell="NO"            # See kbdcontrol(1) for options.  Use "off" to disable.
503 keychange="NO"          # function keys default values (or NO).
504 cursor="NO"             # cursor type {normal|blink|destructive} (or NO).
505 scrnmap="NO"            # screen map in /usr/share/syscons/scrnmaps/* (or NO).
506 font8x16="NO"           # font 8x16 from /usr/share/syscons/fonts/* (or NO).
507 font8x14="NO"           # font 8x14 from /usr/share/syscons/fonts/* (or NO).
508 font8x8="NO"            # font 8x8 from /usr/share/syscons/fonts/* (or NO).
509 blanktime="300"         # blank time (in seconds) or "NO" to turn it off.
510 saver="NO"              # screen saver: Uses /boot/kernel/${saver}_saver.ko
511 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
512                                # specifically overriden in rc.conf(5).
513 moused_enable="NO"      # Run the mouse daemon.
514 moused_type="auto"      # See man page for rc.conf(5) for available settings.
515 moused_port="/dev/psm0" # Set to your mouse port.
516 moused_flags=""         # Any additional flags to moused.
517 mousechar_start="NO"    # if 0xd0-0xd3 default range is occupied in your
518                         # language code table, specify alternative range
519                         # start like mousechar_start=3, see vidcontrol(1)
520 allscreens_flags=""     # Set this vidcontrol mode for all virtual screens
521 allscreens_kbdflags=""  # Set this kbdcontrol mode for all virtual screens
522
523 ##############################################################
524 ###  Mail Transfer Agent (MTA) options  ######################
525 ##############################################################
526
527 mta_start_script="/etc/rc.sendmail"
528                         # Script to start your chosen MTA, called by /etc/rc.
529 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
530 sendmail_enable="NO"    # Run the sendmail inbound daemon (YES/NO).
531 sendmail_pidfile="/var/run/sendmail.pid"        # sendmail pid file
532 sendmail_procname="/usr/sbin/sendmail"          # sendmail process name
533 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
534 sendmail_submit_enable="YES"    # Start a localhost-only MTA for mail submission
535 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
536                                 # Flags for localhost-only MTA
537 sendmail_outbound_enable="YES"  # Dequeue stuck mail (YES/NO).
538 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
539 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
540 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
541                                 # Flags for sendmail_msp_queue daemon.
542 sendmail_rebuild_aliases="NO"   # Run newaliases if necessary (YES/NO).
543
544
545 ##############################################################
546 ###  Miscellaneous administrative options  ###################
547 ##############################################################
548
549 auditd_enable="NO"      # Run the audit daemon.
550 auditd_program="/usr/sbin/auditd"       # Path to the audit daemon.
551 auditd_flags=""         # Which options to pass to the audit daemon.
552 cron_enable="YES"       # Run the periodic job daemon.
553 cron_program="/usr/sbin/cron"   # Which cron executable to run (if enabled).
554 cron_dst="YES"          # Handle DST transitions intelligently (YES/NO)
555 cron_flags=""           # Which options to pass to the cron daemon.
556 lpd_enable="NO"         # Run the line printer daemon.
557 lpd_program="/usr/sbin/lpd"     # path to lpd, if you want a different one.
558 lpd_flags=""            # Flags to lpd (if enabled).
559 nscd_enable="NO"        # Run the nsswitch caching daemon.
560 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
561 chkprintcap_flags="-d"  # Create missing directories by default.
562 dumpdev="NO"            # Device to crashdump to (device name, AUTO, or NO).
563 dumpdir="/var/crash"    # Directory where crash dumps are to be stored
564 savecore_flags=""       # Used if dumpdev is enabled above, and present.
565 crashinfo_enable="YES"  # Automatically generate crash dump summary.
566 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
567 quota_enable="NO"       # turn on quotas on startup (or NO).
568 check_quotas="YES"      # Check quotas on startup (or NO).
569 quotaon_flags="-a"      # Turn quotas on for all file systems (if enabled)
570 quotaoff_flags="-a"     # Turn quotas off for all file systems at shutdown
571 quotacheck_flags="-a"   # Check all file system quotas (if enabled)
572 accounting_enable="NO"  # Turn on process accounting (or NO).
573 ibcs2_enable="NO"       # Ibcs2 (SCO) emulation loaded at startup (or NO).
574 ibcs2_loaders="coff"    # List of additional Ibcs2 loaders (or NO).
575
576 # Emulation/compatibility services provided by /etc/rc.d/abi
577 sysvipc_enable="NO"     # Load System V IPC primitives at startup (or NO).
578 linux_enable="NO"       # Linux binary compatibility loaded at startup (or NO).
579 svr4_enable="NO"        # SysVR4 emulation loaded at startup (or NO).
580 clear_tmp_enable="NO"   # Clear /tmp at startup.
581 clear_tmp_X="YES"       # Clear and recreate X11-related directories in /tmp
582 ldconfig_insecure="NO"  # Set to YES to disable ldconfig security checks
583 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
584                         # shared library search paths
585 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
586 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
587                         # a.out shared library search paths
588 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
589                         # Local directories with ldconfig configuration files.
590 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
591                         # Local directories with 32-bit compatibility ldconfig
592                         # configuration files.
593 kern_securelevel_enable="NO"    # kernel security level (see security(7))
594 kern_securelevel="-1"   # range: -1..3 ; `-1' is the most insecure
595                         # Note that setting securelevel to 0 will result
596                         # in the system booting with securelevel set to 1, as
597                         # init(8) will raise the level when rc(8) completes.
598 update_motd="YES"       # update version info in /etc/motd (or NO)
599 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
600                         # /var/db/entropy-file is preferred if / is not avail.
601 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
602 entropy_save_sz="2048"  # Size of the entropy cache files.
603 entropy_save_num="8"    # Number of entropy cache files to save.
604 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
605 harvest_ethernet="YES"  # Entropy device harvests ethernet randomness
606 harvest_p_to_p="YES"    # Entropy device harvests point-to-point randomness
607 dmesg_enable="YES"      # Save dmesg(8) to /var/run/dmesg.boot
608 watchdogd_enable="NO"   # Start the software watchdog daemon
609 watchdogd_flags=""      # Flags to watchdogd (if enabled)
610 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
611                                                             # devfs(8) rules.
612 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
613 devfs_set_rulesets=""   # A list of /mount/dev=ruleset_name settings to
614                         # apply (must be mounted already, i.e. fstab(5))
615 performance_cx_lowest="HIGH"    # Online CPU idle state
616 performance_cpu_freq="NONE"     # Online CPU frequency
617 economy_cx_lowest="HIGH"        # Offline CPU idle state
618 economy_cpu_freq="NONE"         # Offline CPU frequency
619 virecover_enable="YES"  # Perform housekeeping for the vi(1) editor
620 ugidfw_enable="NO"      # Load mac_bsdextended(4) rules on boot
621 bsdextended_script="/etc/rc.bsdextended"        # Default mac_bsdextended(4)
622                                                 # ruleset file.
623 newsyslog_enable="YES"  # Run newsyslog at startup.
624 newsyslog_flags="-CN"   # Newsyslog flags to create marked files
625 mixer_enable="YES"      # Run the sound mixer.
626
627 ##############################################################
628 ### Jail Configuration #######################################
629 ##############################################################
630 jail_enable="NO"        # Set to NO to disable starting of any jails
631 jail_list=""            # Space separated list of names of jails
632 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
633 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
634 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
635
636 #
637 # To use rc's built-in jail infrastructure create entries for
638 # each jail, specified in jail_list, with the following variables.
639 # NOTES:
640 # - replace 'example' with the jail's name.
641 # - except rootdir, hostname, ip and the _multi<n> addresses,
642 #   all of the following variables may be made global jail variables
643 #   if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset).
644 #
645 #jail_example_rootdir="/usr/jail/default"       # Jail's root directory
646 #jail_example_hostname="default.domain.com"     # Jail's hostname
647 #jail_example_interface=""                      # Jail's interface variable to create IP aliases on
648 #jail_example_fib="0"                           # Routing table for setfib(1) 
649 #jail_example_ip="192.0.2.10,2001:db8::17"      # Jail's primary IPv4 and IPv6 address
650 #jail_example_ip_multi0="2001:db8::10"          #  and another IPv6 address
651 #jail_example_exec_start="/bin/sh /etc/rc"              # command to execute in jail for starting
652 #jail_example_exec_afterstart0="/bin/sh command"        # command to execute after the one for 
653                                                         # starting the jail. More than one can be
654                                                         # specified using a trailing number
655 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown"      # command to execute in jail for stopping
656 #jail_example_devfs_enable="NO"                 # mount devfs in the jail
657 #jail_example_devfs_ruleset="ruleset_name"      # devfs ruleset to apply to jail -
658                                                 # usually you want "devfsrules_jail".
659 #jail_example_fdescfs_enable="NO"               # mount fdescfs in the jail
660 #jail_example_procfs_enable="NO"                # mount procfs in jail
661 #jail_example_mount_enable="NO"                 # mount/umount jail's fs
662 #jail_example_fstab=""                          # fstab(5) for mount/umount
663 #jail_example_flags="-l -U root"                # flags for jail(8)
664
665 ##############################################################
666 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
667 ### scripts to source rc_conf_files overrides safely.       ##
668 ##############################################################
669
670 if [ -z "${source_rc_confs_defined}" ]; then
671         source_rc_confs_defined=yes
672         source_rc_confs () {
673                 local i sourced_files
674                 for i in ${rc_conf_files}; do
675                         case ${sourced_files} in
676                         *:$i:*)
677                                 ;;
678                         *)
679                                 sourced_files="${sourced_files}:$i:"
680                                 if [ -r $i ]; then
681                                         . $i
682                                 fi
683                                 ;;
684                         esac
685                 done
686         }
687 fi