3 # NOTE: Please would any committer updating this file also update the
4 # make.conf(5) manual page, if necessary, which is located in
5 # src/share/man/man5/make.conf.5.
7 # /etc/make.conf, if present, will be read by make (see
8 # /usr/share/mk/sys.mk). It allows you to override macro definitions
9 # to make without changing your source tree, or anything the source
12 # This file must be in valid Makefile syntax.
14 # There are additional things you can put into /etc/make.conf.
15 # You have to find those in the Makefiles and documentation of
18 # Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR
19 # from make.conf (or as command line variables to make).
20 # Both variables are environment variables for make and must be used as:
22 # env MAKEOBJDIRPREFIX=/big/directory make
25 # The CPUTYPE variable controls which processor should be targeted for
26 # generated code. This controls processor-specific optimizations in
27 # certain code (currently only OpenSSL) as well as modifying the value
28 # of CFLAGS to contain the appropriate optimization directive to gcc.
29 # The automatic setting of CFLAGS may be overridden using the
30 # NO_CPU_CFLAGS variable below.
31 # Currently the following CPU types are recognized:
32 # Intel x86 architecture:
33 # (AMD CPUs) opteron-sse3 opteron athlon64-sse3 athlon64 athlon-mp
34 # athlon-xp athlon-4 athlon-tbird athlon k8-sse3 k8
35 # geode k6-3 k6-2 k6 k5
36 # (Intel CPUs) core2 core nocona pentium4m pentium4 prescott
37 # pentium3m pentium3 pentium-m pentium2
38 # pentiumpro pentium-mmx pentium i486 i386
40 # Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4
41 # AMD64 architecture: opteron, athlon64, nocona, prescott, core2
42 # Intel ia64 architecture: itanium2, itanium
43 # SPARC-V9 architecture: v9 (generic 64-bit V9), ultrasparc (default
44 # if omitted), ultrasparc3
46 # (?= allows to buildworld for a different CPUTYPE.)
49 #NO_CPU_CFLAGS= # Don't add -march=<cpu> to CFLAGS automatically
50 #NO_CPU_COPTFLAGS= # Don't add -march=<cpu> to COPTFLAGS automatically
52 # CFLAGS controls the compiler settings used when compiling C code.
53 # Note that optimization settings other than -O and -O2 are not recommended
54 # or supported for compiling the world or the kernel - please revert any
55 # nonstandard optimization settings
56 # before submitting bug reports without patches to the developers.
58 # CXXFLAGS controls the compiler settings used when compiling C++ code.
59 # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
60 # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
61 # alone will remove the often needed contents of CFLAGS from CXXFLAGS.
63 # Additional compiler flags can be specified that extend or override
64 # default ones. However, neither the base system nor ports are guaranteed
65 # to build and function without problems with non-default settings.
70 # MAKE_SHELL controls the shell used internally by make(1) to process the
71 # command scripts in makefiles. Three shells are supported, sh, ksh, and
72 # csh. Using sh is most common, and advised. Using ksh *may* work, but is
73 # not guaranteed to. Using csh is absurd. The default is to use sh.
77 # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
78 # for use in developing FreeBSD and testing changes. They can be used by
79 # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
80 # included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
82 #BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
83 # -Wcast-qual -Wchar-subscripts -Winline \
84 # -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
85 # -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
87 # To compile just the kernel with special optimizations, you should use
88 # this instead of CFLAGS (which is not applicable to kernel builds anyway).
89 # There is very little to gain by using higher optimization levels, and doing
90 # so can cause problems.
94 # Compare before install
97 # Mtree will follow symlinks
98 #MTREE_FOLLOWS_SYMLINKS= -L
100 # To enable installing ssh(1) with the setuid bit turned on
103 # To enable installing newgrp(1) with the setuid bit turned on.
104 # Without the setuid bit, newgrp cannot change users' groups.
107 # To avoid building various parts of the base system:
108 #NO_MODULES= # do not build modules with the kernel
109 #NO_SHARE= # do not go into the share subdir
110 #NO_SHARED= # build /bin and /sbin statically linked (bad idea)
112 # Variables that control how ppp(8) is built.
113 #PPP_NO_NAT= # do not build with NAT support (see make.conf(5))
114 #PPP_NO_NETGRAPH= # do not build with Netgraph support
115 #PPP_NO_RADIUS= # do not build with RADIUS support
116 #PPP_NO_SUID= # build with normal permissions
118 #TRACEROUTE_NO_IPSEC= # do not build traceroute(8) with IPSEC support
120 # To build sys/modules when building the world (our old way of doing things)
121 #MODULES_WITH_WORLD= # do not build modules when building kernel
123 # The list of modules to build instead of all of them.
124 #MODULES_OVERRIDE= linux ipfw
126 # The list of modules to never build, applied *after* MODULES_OVERRIDE.
127 #WITHOUT_MODULES= bktr plip
129 # If you do not want unformatted manual pages to be compressed
130 # when they are installed:
135 # Default format for system documentation, depends on your printer.
136 # Set this to "ascii" for simple printers or screen
141 # How long to wait for a console keypress before booting the default kernel.
142 # This value is approximately in milliseconds. Keypresses are accepted by the
143 # BIOS before booting from disk, making it possible to give custom boot
144 # parameters even when this is set to 0.
149 # By default, the system will always use the keyboard/video card as system
150 # console. However, the boot blocks may be dynamically configured to use a
151 # serial port in addition to or instead of the keyboard/video console.
153 # By default we use COM1 as our serial console port *if* we're going to use
154 # a serial port as our console at all. Alter as necessary.
156 # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
158 #BOOT_COMCONSOLE_PORT= 0x3F8
160 # The default serial console speed is 9600. Set the speed to a larger value
161 # for better interactive response.
163 #BOOT_COMCONSOLE_SPEED= 115200
165 # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
166 # this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
167 # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
168 # still mount the server's '/' (i.e. rather than load the server's kernel).
170 #LOADER_TFTP_SUPPORT= YES
173 # Kerberos 5 su (k5su)
174 # If you want to use the k5su utility, define this to have it installed
179 # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
180 # file(s) you use on your site (see /usr/share/examples/cvsup/README for more
181 # information on CVSup and these files). To use, do "make update" in /usr/src.
187 #SUPHOST= cvsup.uk.FreeBSD.org
188 #SUPFILE= /usr/share/examples/cvsup/standard-supfile
189 #PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
190 #DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
192 # top(1) uses a hash table for the user names. The size of this hash
193 # can be tuned to match the number of local users. The table size should
194 # be a prime number approximately twice as large as the number of lines in
195 # /etc/passwd. The default number is 20011.
201 # The list of languages and encodings to build and install
203 #DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
208 # The following sets the default m4 configuration file to use at
209 # install time. Use with caution as a make install will overwrite
210 # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
211 # deprecated. The value should be a fully qualified path name.
213 #SENDMAIL_MC=/etc/mail/myconfig.mc
215 # The following sets the default m4 configuration file for mail
216 # submission to use at install time. Use with caution as a make
217 # install will overwrite any existing /etc/mail/submit.cf. The
218 # value should be a fully qualified path name.
220 #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
222 # If you need to build additional .cf files during a make buildworld,
223 # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
225 #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
227 # The following overrides the default location for the m4 configuration
228 # files used to build a .cf file from a .mc file.
230 #SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf
232 # Setting the following variable modifies the flags passed to m4 when
233 # building a .cf file from a .mc file. It can be used to enable
234 # features disabled by default.
238 # Setting the following variables modifies the build environment for
239 # sendmail and its related utilities. For example, SASL support can be
240 # added with settings such as:
243 # SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
244 # SENDMAIL_LDFLAGS=-L/usr/local/lib
245 # SENDMAIL_LDADD=-lsasl
248 # SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
249 # SENDMAIL_LDFLAGS=-L/usr/local/lib
250 # SENDMAIL_LDADD=-lsasl2
252 # Note: If you are using Cyrus SASL with other applications which require
253 # access to the sasldb file, you should add the following to your
256 # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
263 # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
264 # set-user-ID root binary instead of a set-group-ID smmsp binary and will
265 # prevent the installation of /etc/mail/submit.cf.
266 # This is a deprecated mode of operation. See etc/mail/README for more
269 #SENDMAIL_SET_USER_ID=
271 # The permissions to use on alias and map databases generated using
272 # /etc/mail/Makefile. Defaults to 0640.
277 # It is also possible to set variables in make.conf which will only be
278 # used when compiling a specific port. For more details see make(1).
280 #.if ${.CURDIR:M*/irc/irssi-devel*}
284 # Another approach is to use /usr/ports/ports-mgmt/portconf which has
285 # its own config file for port specific options.