2 * Copyright (c) 2012 Ganbold Tsagaankhuu <ganbold@gmail.com>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
30 #include <sys/param.h>
31 #include <sys/systm.h>
33 #include <sys/kernel.h>
34 #include <sys/module.h>
35 #include <sys/malloc.h>
37 #include <sys/timeet.h>
38 #include <sys/timetc.h>
39 #include <sys/watchdog.h>
40 #include <machine/bus.h>
41 #include <machine/cpu.h>
42 #include <machine/intr.h>
44 #include <dev/fdt/fdt_common.h>
45 #include <dev/ofw/openfirm.h>
46 #include <dev/ofw/ofw_bus.h>
47 #include <dev/ofw/ofw_bus_subr.h>
49 #include <machine/bus.h>
50 #include <machine/fdt.h>
54 #include "a20/a20_cpu_cfg.h"
57 * Timer registers addr
60 #define SW_TIMER_IRQ_EN_REG 0x00
61 #define SW_TIMER_IRQ_STA_REG 0x04
62 #define SW_TIMER0_CTRL_REG 0x10
63 #define SW_TIMER0_INT_VALUE_REG 0x14
64 #define SW_TIMER0_CUR_VALUE_REG 0x18
66 #define SW_COUNTER64LO_REG 0xa4
67 #define SW_COUNTER64HI_REG 0xa8
68 #define CNT64_CTRL_REG 0xa0
70 #define CNT64_RL_EN 0x02 /* read latch enable */
72 #define TIMER_ENABLE (1<<0)
73 #define TIMER_AUTORELOAD (1<<1)
74 #define TIMER_OSC24M (1<<2) /* oscillator = 24mhz */
75 #define TIMER_PRESCALAR (4<<4) /* prescalar = 16 */
77 #define SYS_TIMER_CLKSRC 24000000 /* clock source */
79 struct a10_timer_softc {
81 struct resource *res[2];
82 bus_space_tag_t sc_bst;
83 bus_space_handle_t sc_bsh;
84 void *sc_ih; /* interrupt handler */
88 uint8_t sc_timer_type; /* 0 for A10, 1 for A20 */
91 int a10_timer_get_timerfreq(struct a10_timer_softc *);
93 #define timer_read_4(sc, reg) \
94 bus_space_read_4(sc->sc_bst, sc->sc_bsh, reg)
95 #define timer_write_4(sc, reg, val) \
96 bus_space_write_4(sc->sc_bst, sc->sc_bsh, reg, val)
98 static u_int a10_timer_get_timecount(struct timecounter *);
99 static int a10_timer_timer_start(struct eventtimer *,
100 sbintime_t first, sbintime_t period);
101 static int a10_timer_timer_stop(struct eventtimer *);
103 static uint64_t timer_read_counter64(void);
105 static int a10_timer_initialized = 0;
106 static int a10_timer_hardclock(void *);
107 static int a10_timer_probe(device_t);
108 static int a10_timer_attach(device_t);
110 static struct timecounter a10_timer_timecounter = {
111 .tc_name = "a10_timer timer0",
112 .tc_get_timecount = a10_timer_get_timecount,
113 .tc_counter_mask = ~0u,
118 struct a10_timer_softc *a10_timer_sc = NULL;
120 static struct resource_spec a10_timer_spec[] = {
121 { SYS_RES_MEMORY, 0, RF_ACTIVE },
122 { SYS_RES_IRQ, 0, RF_ACTIVE },
127 timer_read_counter64(void)
131 /* In case of A20 get appropriate counter info */
132 if (a10_timer_sc->sc_timer_type)
133 return (a20_read_counter64());
135 /* Latch counter, wait for it to be ready to read. */
136 timer_write_4(a10_timer_sc, CNT64_CTRL_REG, CNT64_RL_EN);
137 while (timer_read_4(a10_timer_sc, CNT64_CTRL_REG) & CNT64_RL_EN)
140 hi = timer_read_4(a10_timer_sc, SW_COUNTER64HI_REG);
141 lo = timer_read_4(a10_timer_sc, SW_COUNTER64LO_REG);
143 return (((uint64_t)hi << 32) | lo);
147 a10_timer_probe(device_t dev)
149 struct a10_timer_softc *sc;
151 sc = device_get_softc(dev);
153 if (ofw_bus_is_compatible(dev, "allwinner,sun4i-timer"))
154 sc->sc_timer_type = 0;
155 else if (ofw_bus_is_compatible(dev, "allwinner,sun7i-timer"))
156 sc->sc_timer_type = 1;
160 device_set_desc(dev, "Allwinner A10/A20 timer");
161 return (BUS_PROBE_DEFAULT);
165 a10_timer_attach(device_t dev)
167 struct a10_timer_softc *sc;
171 sc = device_get_softc(dev);
173 if (bus_alloc_resources(dev, a10_timer_spec, sc->res)) {
174 device_printf(dev, "could not allocate resources\n");
179 sc->sc_bst = rman_get_bustag(sc->res[0]);
180 sc->sc_bsh = rman_get_bushandle(sc->res[0]);
182 /* Setup and enable the timer interrupt */
183 err = bus_setup_intr(dev, sc->res[1], INTR_TYPE_CLK, a10_timer_hardclock,
184 NULL, sc, &sc->sc_ih);
186 bus_release_resources(dev, a10_timer_spec, sc->res);
187 device_printf(dev, "Unable to setup the clock irq handler, "
192 /* Set clock source to OSC24M, 16 pre-division */
193 val = timer_read_4(sc, SW_TIMER0_CTRL_REG);
194 val |= TIMER_PRESCALAR | TIMER_OSC24M;
195 timer_write_4(sc, SW_TIMER0_CTRL_REG, val);
198 val = timer_read_4(sc, SW_TIMER_IRQ_EN_REG);
200 timer_write_4(sc, SW_TIMER_IRQ_EN_REG, val);
202 sc->timer0_freq = SYS_TIMER_CLKSRC;
204 /* Set desired frequency in event timer and timecounter */
205 sc->et.et_frequency = sc->timer0_freq;
206 sc->et.et_name = "a10_timer Eventtimer";
207 sc->et.et_flags = ET_FLAGS_ONESHOT | ET_FLAGS_PERIODIC;
208 sc->et.et_quality = 1000;
209 sc->et.et_min_period = (0x00000005LLU << 32) / sc->et.et_frequency;
210 sc->et.et_max_period = (0xfffffffeLLU << 32) / sc->et.et_frequency;
211 sc->et.et_start = a10_timer_timer_start;
212 sc->et.et_stop = a10_timer_timer_stop;
214 et_register(&sc->et);
216 if (device_get_unit(dev) == 0)
219 a10_timer_timecounter.tc_frequency = sc->timer0_freq;
220 tc_init(&a10_timer_timecounter);
223 device_printf(sc->sc_dev, "clock: hz=%d stathz = %d\n", hz, stathz);
225 device_printf(sc->sc_dev, "event timer clock frequency %u\n",
227 device_printf(sc->sc_dev, "timecounter clock frequency %lld\n",
228 a10_timer_timecounter.tc_frequency);
231 a10_timer_initialized = 1;
237 a10_timer_timer_start(struct eventtimer *et, sbintime_t first,
240 struct a10_timer_softc *sc;
244 sc = (struct a10_timer_softc *)et->et_priv;
247 sc->sc_period = ((uint32_t)et->et_frequency * period) >> 32;
251 count = ((uint32_t)et->et_frequency * first) >> 32;
253 count = sc->sc_period;
255 /* Update timer values */
256 timer_write_4(sc, SW_TIMER0_INT_VALUE_REG, sc->sc_period);
257 timer_write_4(sc, SW_TIMER0_CUR_VALUE_REG, count);
259 val = timer_read_4(sc, SW_TIMER0_CTRL_REG);
262 val |= TIMER_AUTORELOAD;
265 val &= ~TIMER_AUTORELOAD;
269 timer_write_4(sc, SW_TIMER0_CTRL_REG, val);
275 a10_timer_timer_stop(struct eventtimer *et)
277 struct a10_timer_softc *sc;
280 sc = (struct a10_timer_softc *)et->et_priv;
283 val = timer_read_4(sc, SW_TIMER0_CTRL_REG);
284 val &= ~TIMER_ENABLE;
285 timer_write_4(sc, SW_TIMER0_CTRL_REG, val);
293 a10_timer_get_timerfreq(struct a10_timer_softc *sc)
295 return (sc->timer0_freq);
299 a10_timer_hardclock(void *arg)
301 struct a10_timer_softc *sc;
304 sc = (struct a10_timer_softc *)arg;
306 /* Clear interrupt pending bit. */
307 timer_write_4(sc, SW_TIMER_IRQ_STA_REG, 0x1);
309 val = timer_read_4(sc, SW_TIMER0_CTRL_REG);
311 * Disabled autoreload and sc_period > 0 means
312 * timer_start was called with non NULL first value.
313 * Now we will set periodic timer with the given period
316 if ((val & (1<<1)) == 0 && sc->sc_period > 0) {
318 timer_write_4(sc, SW_TIMER0_CUR_VALUE_REG, sc->sc_period);
320 /* Make periodic and enable */
321 val |= TIMER_AUTORELOAD | TIMER_ENABLE;
322 timer_write_4(sc, SW_TIMER0_CTRL_REG, val);
325 if (sc->et.et_active)
326 sc->et.et_event_cb(&sc->et, sc->et.et_arg);
328 return (FILTER_HANDLED);
332 a10_timer_get_timecount(struct timecounter *tc)
335 if (a10_timer_sc == NULL)
338 return ((u_int)timer_read_counter64());
341 static device_method_t a10_timer_methods[] = {
342 DEVMETHOD(device_probe, a10_timer_probe),
343 DEVMETHOD(device_attach, a10_timer_attach),
348 static driver_t a10_timer_driver = {
351 sizeof(struct a10_timer_softc),
354 static devclass_t a10_timer_devclass;
356 DRIVER_MODULE(a10_timer, simplebus, a10_timer_driver, a10_timer_devclass, 0, 0);
364 if (!a10_timer_initialized) {
365 for (; usec > 0; usec--)
366 for (counter = 50; counter > 0; counter--)
371 now = timer_read_counter64();
372 end = now + (a10_timer_sc->timer0_freq / 1000000) * (usec + 1);
375 now = timer_read_counter64();