1 /* $NetBSD: hpc_machdep.c,v 1.70 2003/09/16 08:18:22 agc Exp $ */
4 * Copyright (c) 1994-1998 Mark Brinicombe.
5 * Copyright (c) 1994 Brini.
8 * This code is derived from software written for Brini by Mark Brinicombe
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by Brini.
21 * 4. The name of the company nor the name of the author may be used to
22 * endorse or promote products derived from this software without specific
23 * prior written permission.
25 * THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR IMPLIED
26 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
27 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
28 * IN NO EVENT SHALL BRINI OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
29 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
30 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
31 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * RiscBSD kernel project
41 * Machine dependant functions for kernel setup
43 * This file needs a lot of work.
48 #include <sys/cdefs.h>
49 __FBSDID("$FreeBSD$");
51 #define _ARM32_BUS_DMA_PRIVATE
52 #include <sys/param.h>
53 #include <sys/systm.h>
54 #include <sys/sysproto.h>
55 #include <sys/signalvar.h>
56 #include <sys/imgact.h>
57 #include <sys/kernel.h>
59 #include <sys/linker.h>
61 #include <sys/malloc.h>
62 #include <sys/mutex.h>
65 #include <sys/ptrace.h>
72 #include <sys/msgbuf.h>
73 #include <machine/reg.h>
74 #include <machine/cpu.h>
78 #include <vm/vm_object.h>
79 #include <vm/vm_page.h>
80 #include <vm/vm_map.h>
81 #include <machine/vmparam.h>
82 #include <machine/pcb.h>
83 #include <machine/undefined.h>
84 #include <machine/machdep.h>
85 #include <machine/metadata.h>
86 #include <machine/armreg.h>
87 #include <machine/bus.h>
88 #include <sys/reboot.h>
90 #include <arm/xscale/i80321/i80321reg.h>
91 #include <arm/xscale/i80321/i80321var.h>
92 #include <arm/xscale/i80321/iq80321reg.h>
93 #include <arm/xscale/i80321/obiovar.h>
95 #define KERNEL_PT_SYS 0 /* Page table for mapping proc0 zero page */
96 #define KERNEL_PT_IOPXS 1
97 #define KERNEL_PT_BEFOREKERN 2
98 #define KERNEL_PT_AFKERNEL 3 /* L2 table for mapping after kernel */
99 #define KERNEL_PT_AFKERNEL_NUM 9
101 /* this should be evenly divisable by PAGE_SIZE / L2_TABLE_SIZE_REAL (or 4) */
102 #define NUM_KERNEL_PTS (KERNEL_PT_AFKERNEL + KERNEL_PT_AFKERNEL_NUM)
104 extern u_int data_abort_handler_address;
105 extern u_int prefetch_abort_handler_address;
106 extern u_int undefined_handler_address;
108 struct pv_addr kernel_pt_table[NUM_KERNEL_PTS];
110 /* Physical and virtual addresses for some global pages */
112 vm_paddr_t phys_avail[10];
113 vm_paddr_t dump_avail[4];
115 struct pv_addr systempage;
116 struct pv_addr msgbufpv;
117 struct pv_addr irqstack;
118 struct pv_addr undstack;
119 struct pv_addr abtstack;
120 struct pv_addr kernelstack;
121 struct pv_addr minidataclean;
123 #define IQ80321_OBIO_BASE 0xfe800000UL
124 #define IQ80321_OBIO_SIZE 0x00100000UL
125 /* Static device mappings. */
126 static const struct pmap_devmap iq80321_devmap[] = {
128 * Map the on-board devices VA == PA so that we can access them
129 * with the MMU on or off.
135 VM_PROT_READ|VM_PROT_WRITE,
140 VERDE_OUT_XLATE_IO_WIN0_BASE,
141 VERDE_OUT_XLATE_IO_WIN_SIZE,
142 VM_PROT_READ|VM_PROT_WRITE,
150 VM_PROT_READ|VM_PROT_WRITE,
162 #define SDRAM_START 0xa0000000
164 extern vm_offset_t xscale_cache_clean_addr;
167 initarm(struct arm_boot_params *abp)
169 struct pv_addr kernel_l1pt;
170 struct pv_addr dpcpu;
173 vm_offset_t freemempos;
174 vm_offset_t freemem_pt;
175 vm_offset_t afterkern;
176 vm_offset_t freemem_after;
177 vm_offset_t lastaddr;
178 uint32_t memsize, memstart;
180 lastaddr = parse_boot_param(abp);
182 pcpu_init(pcpup, 0, sizeof(struct pcpu));
183 PCPU_SET(curthread, &thread0);
185 /* Do basic tuning, hz etc */
188 freemempos = 0xa0200000;
189 /* Define a macro to simplify memory allocation */
190 #define valloc_pages(var, np) \
191 alloc_pages((var).pv_pa, (np)); \
192 (var).pv_va = (var).pv_pa + 0x20000000;
194 #define alloc_pages(var, np) \
195 freemempos -= (np * PAGE_SIZE); \
196 (var) = freemempos; \
197 memset((char *)(var), 0, ((np) * PAGE_SIZE));
199 while (((freemempos - L1_TABLE_SIZE) & (L1_TABLE_SIZE - 1)) != 0)
200 freemempos -= PAGE_SIZE;
201 valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
202 for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
203 if (!(loop % (PAGE_SIZE / L2_TABLE_SIZE_REAL))) {
204 valloc_pages(kernel_pt_table[loop],
205 L2_TABLE_SIZE / PAGE_SIZE);
207 kernel_pt_table[loop].pv_pa = freemempos +
208 (loop % (PAGE_SIZE / L2_TABLE_SIZE_REAL)) *
210 kernel_pt_table[loop].pv_va =
211 kernel_pt_table[loop].pv_pa + 0x20000000;
214 freemem_pt = freemempos;
215 freemempos = 0xa0100000;
217 * Allocate a page for the system page mapped to V0x00000000
218 * This page will just contain the system vectors and can be
219 * shared by all processes.
221 valloc_pages(systempage, 1);
223 /* Allocate dynamic per-cpu area. */
224 valloc_pages(dpcpu, DPCPU_SIZE / PAGE_SIZE);
225 dpcpu_init((void *)dpcpu.pv_va, 0);
227 /* Allocate stacks for all modes */
228 valloc_pages(irqstack, IRQ_STACK_SIZE);
229 valloc_pages(abtstack, ABT_STACK_SIZE);
230 valloc_pages(undstack, UND_STACK_SIZE);
231 valloc_pages(kernelstack, KSTACK_PAGES);
232 alloc_pages(minidataclean.pv_pa, 1);
233 valloc_pages(msgbufpv, round_page(msgbufsize) / PAGE_SIZE);
234 #ifdef ARM_USE_SMALL_ALLOC
235 freemempos -= PAGE_SIZE;
236 freemem_pt = trunc_page(freemem_pt);
237 freemem_after = freemempos - ((freemem_pt - 0xa0100000) /
238 PAGE_SIZE) * sizeof(struct arm_small_page);
239 arm_add_smallalloc_pages((void *)(freemem_after + 0x20000000),
240 (void *)0xc0100000, freemem_pt - 0xa0100000, 1);
241 freemem_after -= ((freemem_after - 0xa0001000) / PAGE_SIZE) *
242 sizeof(struct arm_small_page);
243 arm_add_smallalloc_pages((void *)(freemem_after + 0x20000000),
244 (void *)0xc0001000, trunc_page(freemem_after) - 0xa0001000, 0);
246 freemempos = trunc_page(freemem_after);
247 freemempos -= PAGE_SIZE;
250 * Allocate memory for the l1 and l2 page tables. The scheme to avoid
251 * wasting memory by allocating the l1pt on the first 16k memory was
252 * taken from NetBSD rpc_machdep.c. NKPT should be greater than 12 for
253 * this to work (which is supposed to be the case).
257 * Now we start construction of the L1 page table
258 * We start by mapping the L2 page tables into the L1.
259 * This means that we can replace L1 mappings later on if necessary
261 l1pagetable = kernel_l1pt.pv_va;
263 /* Map the L2 pages tables in the L1 page table */
264 pmap_link_l2pt(l1pagetable, ARM_VECTORS_HIGH & ~(0x00100000 - 1),
265 &kernel_pt_table[KERNEL_PT_SYS]);
266 pmap_link_l2pt(l1pagetable, IQ80321_IOPXS_VBASE,
267 &kernel_pt_table[KERNEL_PT_IOPXS]);
268 pmap_link_l2pt(l1pagetable, KERNBASE,
269 &kernel_pt_table[KERNEL_PT_BEFOREKERN]);
270 pmap_map_chunk(l1pagetable, KERNBASE, SDRAM_START, 0x100000,
271 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
272 pmap_map_chunk(l1pagetable, KERNBASE + 0x100000, SDRAM_START + 0x100000,
273 0x100000, VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
274 pmap_map_chunk(l1pagetable, KERNBASE + 0x200000, SDRAM_START + 0x200000,
275 (((uint32_t)(lastaddr) - KERNBASE - 0x200000) + L1_S_SIZE) & ~(L1_S_SIZE - 1),
276 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
277 freemem_after = ((int)lastaddr + PAGE_SIZE) & ~(PAGE_SIZE - 1);
278 afterkern = round_page(((vm_offset_t)lastaddr + L1_S_SIZE) & ~(L1_S_SIZE
280 for (i = 0; i < KERNEL_PT_AFKERNEL_NUM; i++) {
281 pmap_link_l2pt(l1pagetable, afterkern + i * 0x00100000,
282 &kernel_pt_table[KERNEL_PT_AFKERNEL + i]);
284 pmap_map_entry(l1pagetable, afterkern, minidataclean.pv_pa,
285 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
288 #ifdef ARM_USE_SMALL_ALLOC
289 if ((freemem_after + 2 * PAGE_SIZE) <= afterkern) {
290 arm_add_smallalloc_pages((void *)(freemem_after),
291 (void*)(freemem_after + PAGE_SIZE),
292 afterkern - (freemem_after + PAGE_SIZE), 0);
297 /* Map the Mini-Data cache clean area. */
298 xscale_setup_minidata(l1pagetable, afterkern,
299 minidataclean.pv_pa);
301 /* Map the vector page. */
302 pmap_map_entry(l1pagetable, ARM_VECTORS_HIGH, systempage.pv_pa,
303 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
304 pmap_devmap_bootstrap(l1pagetable, iq80321_devmap);
306 * Give the XScale global cache clean code an appropriately
307 * sized chunk of unmapped VA space starting at 0xff000000
308 * (our device mappings end before this address).
310 xscale_cache_clean_addr = 0xff000000U;
312 cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT);
313 setttb(kernel_l1pt.pv_pa);
315 cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2));
317 * Pages were allocated during the secondary bootstrap for the
318 * stacks for different CPU modes.
319 * We must now set the r13 registers in the different CPU modes to
320 * point to these stacks.
321 * Since the ARM stacks use STMFD etc. we must set r13 to the top end
322 * of the stack memory.
327 * We must now clean the cache again....
328 * Cleaning may be done by reading new data to displace any
329 * dirty data in the cache. This will have happened in setttb()
330 * but since we are boot strapping the addresses used for the read
331 * may have just been remapped and thus the cache could be out
332 * of sync. A re-clean after the switch will cure this.
333 * After booting there are no gross relocations of the kernel thus
334 * this problem will not occur after initarm().
336 cpu_idcache_wbinv_all();
338 * Fetch the SDRAM start/size from the i80321 SDRAM configration
341 i80321_calibrate_delay();
342 i80321_sdram_bounds(&obio_bs_tag, IQ80321_80321_VBASE + VERDE_MCU_BASE,
343 &memstart, &memsize);
344 physmem = memsize / PAGE_SIZE;
347 /* Set stack for exception handlers */
349 data_abort_handler_address = (u_int)data_abort_handler;
350 prefetch_abort_handler_address = (u_int)prefetch_abort_handler;
351 undefined_handler_address = (u_int)undefinedinstruction_bounce;
354 init_proc0(kernelstack.pv_va);
356 /* Enable MMU, I-cache, D-cache, write buffer. */
358 arm_vector_init(ARM_VECTORS_HIGH, ARM_VEC_ALL);
359 pmap_curmaxkvaddr = afterkern + PAGE_SIZE;
361 * ARM_USE_SMALL_ALLOC uses dump_avail, so it must be filled before
362 * calling pmap_bootstrap.
364 dump_avail[0] = 0xa0000000;
365 dump_avail[1] = 0xa0000000 + memsize;
369 vm_max_kernel_address = 0xd0000000;
370 pmap_bootstrap(pmap_curmaxkvaddr, &kernel_l1pt);
371 msgbufp = (void*)msgbufpv.pv_va;
372 msgbufinit(msgbufp, msgbufsize);
376 #ifdef ARM_USE_SMALL_ALLOC
377 phys_avail[i++] = 0xa0000000;
378 phys_avail[i++] = 0xa0001000; /*
379 *XXX: Gross hack to get our
380 * pages in the vm_page_array
383 phys_avail[i++] = round_page(virtual_avail - KERNBASE + SDRAM_START);
384 phys_avail[i++] = trunc_page(0xa0000000 + memsize - 1);
388 init_param2(physmem);
390 return ((void *)(kernelstack.pv_va + USPACE_SVC_STACK_TOP -
391 sizeof(struct pcb)));
395 machdep_pci_route_interrupt(device_t pcib, device_t dev, int pin)
401 struct i80321_pci_softc *sc = device_get_softc(pcib);
402 bus = pci_get_bus(dev);
403 device = pci_get_slot(dev);
404 func = pci_get_function(dev);
405 busno = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, ATU_PCIXSR);
406 busno = PCIXSR_BUSNO(busno);
413 case 1: /* PCIX-PCIX bridge */
415 * The S-ATA chips are behind the bridge, and all of
416 * the S-ATA interrupts are wired together.
418 return (ICU_INT_XINT(2));
419 case 2: /* PCI slot */
420 /* All pins are wired together. */
421 return (ICU_INT_XINT(3));
422 case 3: /* i82546 dual Gig-E */
423 if (pin == 1 || pin == 2)
424 return (ICU_INT_XINT(0));
427 case 4: /* i82544 Gig-E */
429 * Apparently you can set the device for the ethernet adapter
430 * to 8 with a jumper, so handle that as well
433 return (ICU_INT_XINT(0));
435 case 6: /* S-PCI-X slot */
437 return (ICU_INT_XINT(2));
439 return (ICU_INT_XINT(3));
443 printf("No mapping for %d/%d/%d/%c\n", bus, device, func, pin);