3 This image is intended to be programmed into boot EEPROM. The image is nearly
4 0x4000 so it will not fit in KB9200's 0x2000. It is intended for KB9201 or
5 later. Alternatively, the KB9200 can be upgraded with larger EEPROM.
6 It performs basic functions prior to executing an image at a
7 specified address. The pre-boot functions can be modified and saved back into
9 The MAC address is set with 0.0.0.0.0.0 by default. This is an invalid address
10 and must be changed to a valid value in order to use the ethernet interface.
16 run stack = 0x21800000
17 variables = 0x21200000
18 ethernet = 0x21000000 (buffers and descriptors)
24 d - display auto command table (in RAM)
29 server_ip - set server ip
30 s - set auto command entry
31 t - create linux boot tag list
32 tftp - download image via tftp
33 w - update auto command table
34 x - download image via xmodem