2 * Implementation of the Common Access Method Transport (XPT) layer.
4 * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
5 * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification, immediately at the beginning of the file.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/types.h>
37 #include <sys/malloc.h>
38 #include <sys/kernel.h>
41 #include <sys/fcntl.h>
42 #include <sys/interrupt.h>
46 #include <sys/taskqueue.h>
49 #include <sys/mutex.h>
50 #include <sys/sysctl.h>
51 #include <sys/kthread.h>
54 #include <cam/cam_ccb.h>
55 #include <cam/cam_periph.h>
56 #include <cam/cam_queue.h>
57 #include <cam/cam_sim.h>
58 #include <cam/cam_xpt.h>
59 #include <cam/cam_xpt_sim.h>
60 #include <cam/cam_xpt_periph.h>
61 #include <cam/cam_xpt_internal.h>
62 #include <cam/cam_debug.h>
63 #include <cam/cam_compat.h>
65 #include <cam/scsi/scsi_all.h>
66 #include <cam/scsi/scsi_message.h>
67 #include <cam/scsi/scsi_pass.h>
69 #include <machine/md_var.h> /* geometry translation */
70 #include <machine/stdarg.h> /* for xpt_print below */
75 * This is the maximum number of high powered commands (e.g. start unit)
76 * that can be outstanding at a particular time.
78 #ifndef CAM_MAX_HIGHPOWER
79 #define CAM_MAX_HIGHPOWER 4
82 /* Datastructures internal to the xpt layer */
83 MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
84 MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
85 MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
86 MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
88 /* Object for defering XPT actions to a taskqueue */
96 uint32_t xpt_generation;
98 /* number of high powered commands that can go through right now */
99 struct mtx xpt_highpower_lock;
100 STAILQ_HEAD(highpowerlist, cam_ed) highpowerq;
103 /* queue for handling async rescan requests. */
104 TAILQ_HEAD(, ccb_hdr) ccb_scanq;
106 int buses_config_done;
108 /* Registered busses */
109 TAILQ_HEAD(,cam_eb) xpt_busses;
110 u_int bus_generation;
112 struct intr_config_hook *xpt_config_hook;
115 struct callout boot_callout;
117 struct mtx xpt_topo_lock;
119 struct taskqueue *xpt_taskq;
124 DM_RET_FLAG_MASK = 0x0f,
127 DM_RET_DESCEND = 0x20,
129 DM_RET_ACTION_MASK = 0xf0
137 } xpt_traverse_depth;
139 struct xpt_traverse_config {
140 xpt_traverse_depth depth;
145 typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg);
146 typedef int xpt_targetfunc_t (struct cam_et *target, void *arg);
147 typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg);
148 typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg);
149 typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
151 /* Transport layer configuration information */
152 static struct xpt_softc xsoftc;
154 MTX_SYSINIT(xpt_topo_init, &xsoftc.xpt_topo_lock, "XPT topology lock", MTX_DEF);
156 TUNABLE_INT("kern.cam.boot_delay", &xsoftc.boot_delay);
157 SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
158 &xsoftc.boot_delay, 0, "Bus registration wait time");
159 SYSCTL_UINT(_kern_cam, OID_AUTO, xpt_generation, CTLFLAG_RD,
160 &xsoftc.xpt_generation, 0, "CAM peripheral generation count");
163 struct mtx_padalign cam_doneq_mtx;
164 STAILQ_HEAD(, ccb_hdr) cam_doneq;
168 static struct cam_doneq cam_doneqs[MAXCPU];
169 static int cam_num_doneqs;
170 static struct proc *cam_proc;
172 TUNABLE_INT("kern.cam.num_doneqs", &cam_num_doneqs);
173 SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
174 &cam_num_doneqs, 0, "Number of completion queues/threads");
176 struct cam_periph *xpt_periph;
178 static periph_init_t xpt_periph_init;
180 static struct periph_driver xpt_driver =
182 xpt_periph_init, "xpt",
183 TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
187 PERIPHDRIVER_DECLARE(xpt, xpt_driver);
189 static d_open_t xptopen;
190 static d_close_t xptclose;
191 static d_ioctl_t xptioctl;
192 static d_ioctl_t xptdoioctl;
194 static struct cdevsw xpt_cdevsw = {
195 .d_version = D_VERSION,
203 /* Storage for debugging datastructures */
204 struct cam_path *cam_dpath;
205 u_int32_t cam_dflags = CAM_DEBUG_FLAGS;
206 TUNABLE_INT("kern.cam.dflags", &cam_dflags);
207 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RW,
208 &cam_dflags, 0, "Enabled debug flags");
209 u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
210 TUNABLE_INT("kern.cam.debug_delay", &cam_debug_delay);
211 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RW,
212 &cam_debug_delay, 0, "Delay in us after each debug message");
214 /* Our boot-time initialization hook */
215 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
217 static moduledata_t cam_moduledata = {
219 cam_module_event_handler,
223 static int xpt_init(void *);
225 DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
226 MODULE_VERSION(cam, 1);
229 static void xpt_async_bcast(struct async_list *async_head,
230 u_int32_t async_code,
231 struct cam_path *path,
233 static path_id_t xptnextfreepathid(void);
234 static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
235 static union ccb *xpt_get_ccb(struct cam_periph *periph);
236 static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
237 static void xpt_run_allocq(struct cam_periph *periph, int sleep);
238 static void xpt_run_allocq_task(void *context, int pending);
239 static void xpt_run_devq(struct cam_devq *devq);
240 static timeout_t xpt_release_devq_timeout;
241 static void xpt_release_simq_timeout(void *arg) __unused;
242 static void xpt_acquire_bus(struct cam_eb *bus);
243 static void xpt_release_bus(struct cam_eb *bus);
244 static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
245 static int xpt_release_devq_device(struct cam_ed *dev, u_int count,
247 static struct cam_et*
248 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
249 static void xpt_acquire_target(struct cam_et *target);
250 static void xpt_release_target(struct cam_et *target);
251 static struct cam_eb*
252 xpt_find_bus(path_id_t path_id);
253 static struct cam_et*
254 xpt_find_target(struct cam_eb *bus, target_id_t target_id);
255 static struct cam_ed*
256 xpt_find_device(struct cam_et *target, lun_id_t lun_id);
257 static void xpt_config(void *arg);
258 static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
259 u_int32_t new_priority);
260 static xpt_devicefunc_t xptpassannouncefunc;
261 static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
262 static void xptpoll(struct cam_sim *sim);
263 static void camisr_runqueue(void);
264 static void xpt_done_process(struct ccb_hdr *ccb_h);
265 static void xpt_done_td(void *);
266 static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns,
267 u_int num_patterns, struct cam_eb *bus);
268 static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns,
270 struct cam_ed *device);
271 static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns,
273 struct cam_periph *periph);
274 static xpt_busfunc_t xptedtbusfunc;
275 static xpt_targetfunc_t xptedttargetfunc;
276 static xpt_devicefunc_t xptedtdevicefunc;
277 static xpt_periphfunc_t xptedtperiphfunc;
278 static xpt_pdrvfunc_t xptplistpdrvfunc;
279 static xpt_periphfunc_t xptplistperiphfunc;
280 static int xptedtmatch(struct ccb_dev_match *cdm);
281 static int xptperiphlistmatch(struct ccb_dev_match *cdm);
282 static int xptbustraverse(struct cam_eb *start_bus,
283 xpt_busfunc_t *tr_func, void *arg);
284 static int xpttargettraverse(struct cam_eb *bus,
285 struct cam_et *start_target,
286 xpt_targetfunc_t *tr_func, void *arg);
287 static int xptdevicetraverse(struct cam_et *target,
288 struct cam_ed *start_device,
289 xpt_devicefunc_t *tr_func, void *arg);
290 static int xptperiphtraverse(struct cam_ed *device,
291 struct cam_periph *start_periph,
292 xpt_periphfunc_t *tr_func, void *arg);
293 static int xptpdrvtraverse(struct periph_driver **start_pdrv,
294 xpt_pdrvfunc_t *tr_func, void *arg);
295 static int xptpdperiphtraverse(struct periph_driver **pdrv,
296 struct cam_periph *start_periph,
297 xpt_periphfunc_t *tr_func,
299 static xpt_busfunc_t xptdefbusfunc;
300 static xpt_targetfunc_t xptdeftargetfunc;
301 static xpt_devicefunc_t xptdefdevicefunc;
302 static xpt_periphfunc_t xptdefperiphfunc;
303 static void xpt_finishconfig_task(void *context, int pending);
304 static void xpt_dev_async_default(u_int32_t async_code,
306 struct cam_et *target,
307 struct cam_ed *device,
309 static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus,
310 struct cam_et *target,
312 static xpt_devicefunc_t xptsetasyncfunc;
313 static xpt_busfunc_t xptsetasyncbusfunc;
314 static cam_status xptregister(struct cam_periph *periph,
316 static __inline int device_is_queued(struct cam_ed *device);
319 xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
323 mtx_assert(&devq->send_mtx, MA_OWNED);
324 if ((dev->ccbq.queue.entries > 0) &&
325 (dev->ccbq.dev_openings > 0) &&
326 (dev->ccbq.queue.qfrozen_cnt == 0)) {
328 * The priority of a device waiting for controller
329 * resources is that of the highest priority CCB
333 xpt_schedule_dev(&devq->send_queue,
335 CAMQ_GET_PRIO(&dev->ccbq.queue));
343 device_is_queued(struct cam_ed *device)
345 return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
351 make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
355 xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
359 * Only allow read-write access.
361 if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
365 * We don't allow nonblocking access.
367 if ((flags & O_NONBLOCK) != 0) {
368 printf("%s: can't do nonblocking access\n", devtoname(dev));
376 xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
383 * Don't automatically grab the xpt softc lock here even though this is going
384 * through the xpt device. The xpt device is really just a back door for
385 * accessing other devices and SIMs, so the right thing to do is to grab
386 * the appropriate SIM lock once the bus/SIM is located.
389 xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
393 if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
394 error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
400 xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
408 * For the transport layer CAMIOCOMMAND ioctl, we really only want
409 * to accept CCB types that don't quite make sense to send through a
410 * passthrough driver. XPT_PATH_INQ is an exception to this, as stated
418 inccb = (union ccb *)addr;
420 bus = xpt_find_bus(inccb->ccb_h.path_id);
424 switch (inccb->ccb_h.func_code) {
427 if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
428 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
429 xpt_release_bus(bus);
434 if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
435 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
436 xpt_release_bus(bus);
444 switch(inccb->ccb_h.func_code) {
452 ccb = xpt_alloc_ccb();
455 * Create a path using the bus, target, and lun the
458 if (xpt_create_path(&ccb->ccb_h.path, NULL,
459 inccb->ccb_h.path_id,
460 inccb->ccb_h.target_id,
461 inccb->ccb_h.target_lun) !=
467 /* Ensure all of our fields are correct */
468 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
469 inccb->ccb_h.pinfo.priority);
470 xpt_merge_ccb(ccb, inccb);
471 xpt_path_lock(ccb->ccb_h.path);
472 cam_periph_runccb(ccb, NULL, 0, 0, NULL);
473 xpt_path_unlock(ccb->ccb_h.path);
474 bcopy(ccb, inccb, sizeof(union ccb));
475 xpt_free_path(ccb->ccb_h.path);
483 * This is an immediate CCB, so it's okay to
484 * allocate it on the stack.
488 * Create a path using the bus, target, and lun the
491 if (xpt_create_path(&ccb.ccb_h.path, NULL,
492 inccb->ccb_h.path_id,
493 inccb->ccb_h.target_id,
494 inccb->ccb_h.target_lun) !=
499 /* Ensure all of our fields are correct */
500 xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
501 inccb->ccb_h.pinfo.priority);
502 xpt_merge_ccb(&ccb, inccb);
504 bcopy(&ccb, inccb, sizeof(union ccb));
505 xpt_free_path(ccb.ccb_h.path);
509 case XPT_DEV_MATCH: {
510 struct cam_periph_map_info mapinfo;
511 struct cam_path *old_path;
514 * We can't deal with physical addresses for this
515 * type of transaction.
517 if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
524 * Save this in case the caller had it set to
525 * something in particular.
527 old_path = inccb->ccb_h.path;
530 * We really don't need a path for the matching
531 * code. The path is needed because of the
532 * debugging statements in xpt_action(). They
533 * assume that the CCB has a valid path.
535 inccb->ccb_h.path = xpt_periph->path;
537 bzero(&mapinfo, sizeof(mapinfo));
540 * Map the pattern and match buffers into kernel
541 * virtual address space.
543 error = cam_periph_mapmem(inccb, &mapinfo, MAXPHYS);
546 inccb->ccb_h.path = old_path;
551 * This is an immediate CCB, we can send it on directly.
556 * Map the buffers back into user space.
558 cam_periph_unmapmem(inccb, &mapinfo);
560 inccb->ccb_h.path = old_path;
569 xpt_release_bus(bus);
573 * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
574 * with the periphal driver name and unit name filled in. The other
575 * fields don't really matter as input. The passthrough driver name
576 * ("pass"), and unit number are passed back in the ccb. The current
577 * device generation number, and the index into the device peripheral
578 * driver list, and the status are also passed back. Note that
579 * since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
580 * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is
581 * (or rather should be) impossible for the device peripheral driver
582 * list to change since we look at the whole thing in one pass, and
583 * we do it with lock protection.
586 case CAMGETPASSTHRU: {
588 struct cam_periph *periph;
589 struct periph_driver **p_drv;
592 int base_periph_found;
594 ccb = (union ccb *)addr;
595 unit = ccb->cgdl.unit_number;
596 name = ccb->cgdl.periph_name;
597 base_periph_found = 0;
600 * Sanity check -- make sure we don't get a null peripheral
603 if (*ccb->cgdl.periph_name == '\0') {
608 /* Keep the list from changing while we traverse it */
611 /* first find our driver in the list of drivers */
612 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
613 if (strcmp((*p_drv)->driver_name, name) == 0)
616 if (*p_drv == NULL) {
618 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
619 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
620 *ccb->cgdl.periph_name = '\0';
621 ccb->cgdl.unit_number = 0;
627 * Run through every peripheral instance of this driver
628 * and check to see whether it matches the unit passed
629 * in by the user. If it does, get out of the loops and
630 * find the passthrough driver associated with that
633 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
634 periph = TAILQ_NEXT(periph, unit_links)) {
636 if (periph->unit_number == unit)
640 * If we found the peripheral driver that the user passed
641 * in, go through all of the peripheral drivers for that
642 * particular device and look for a passthrough driver.
644 if (periph != NULL) {
645 struct cam_ed *device;
648 base_periph_found = 1;
649 device = periph->path->device;
650 for (i = 0, periph = SLIST_FIRST(&device->periphs);
652 periph = SLIST_NEXT(periph, periph_links), i++) {
654 * Check to see whether we have a
655 * passthrough device or not.
657 if (strcmp(periph->periph_name, "pass") == 0) {
659 * Fill in the getdevlist fields.
661 strcpy(ccb->cgdl.periph_name,
662 periph->periph_name);
663 ccb->cgdl.unit_number =
665 if (SLIST_NEXT(periph, periph_links))
667 CAM_GDEVLIST_MORE_DEVS;
670 CAM_GDEVLIST_LAST_DEVICE;
671 ccb->cgdl.generation =
675 * Fill in some CCB header fields
676 * that the user may want.
679 periph->path->bus->path_id;
680 ccb->ccb_h.target_id =
681 periph->path->target->target_id;
682 ccb->ccb_h.target_lun =
683 periph->path->device->lun_id;
684 ccb->ccb_h.status = CAM_REQ_CMP;
691 * If the periph is null here, one of two things has
692 * happened. The first possibility is that we couldn't
693 * find the unit number of the particular peripheral driver
694 * that the user is asking about. e.g. the user asks for
695 * the passthrough driver for "da11". We find the list of
696 * "da" peripherals all right, but there is no unit 11.
697 * The other possibility is that we went through the list
698 * of peripheral drivers attached to the device structure,
699 * but didn't find one with the name "pass". Either way,
700 * we return ENOENT, since we couldn't find something.
702 if (periph == NULL) {
703 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
704 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
705 *ccb->cgdl.periph_name = '\0';
706 ccb->cgdl.unit_number = 0;
709 * It is unfortunate that this is even necessary,
710 * but there are many, many clueless users out there.
711 * If this is true, the user is looking for the
712 * passthrough driver, but doesn't have one in his
715 if (base_periph_found == 1) {
716 printf("xptioctl: pass driver is not in the "
718 printf("xptioctl: put \"device pass\" in "
719 "your kernel config file\n");
734 cam_module_event_handler(module_t mod, int what, void *arg)
740 if ((error = xpt_init(NULL)) != 0)
753 xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
756 if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
757 xpt_free_path(done_ccb->ccb_h.path);
758 xpt_free_ccb(done_ccb);
760 done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
761 (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
766 /* thread to handle bus rescans */
768 xpt_scanner_thread(void *dummy)
771 struct cam_path path;
775 if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
776 msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
778 if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
779 TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
783 * Since lock can be dropped inside and path freed
784 * by completion callback even before return here,
785 * take our own path copy for reference.
787 xpt_copy_path(&path, ccb->ccb_h.path);
788 xpt_path_lock(&path);
790 xpt_path_unlock(&path);
791 xpt_release_path(&path);
799 xpt_rescan(union ccb *ccb)
803 /* Prepare request */
804 if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
805 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
806 ccb->ccb_h.func_code = XPT_SCAN_BUS;
807 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
808 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
809 ccb->ccb_h.func_code = XPT_SCAN_TGT;
810 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
811 ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
812 ccb->ccb_h.func_code = XPT_SCAN_LUN;
814 xpt_print(ccb->ccb_h.path, "illegal scan path\n");
815 xpt_free_path(ccb->ccb_h.path);
819 ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
820 ccb->ccb_h.cbfcnp = xpt_rescan_done;
821 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
822 /* Don't make duplicate entries for the same paths. */
824 if (ccb->ccb_h.ppriv_ptr1 == NULL) {
825 TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
826 if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
827 wakeup(&xsoftc.ccb_scanq);
829 xpt_print(ccb->ccb_h.path, "rescan already queued\n");
830 xpt_free_path(ccb->ccb_h.path);
836 TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
837 xsoftc.buses_to_config++;
838 wakeup(&xsoftc.ccb_scanq);
842 /* Functions accessed by the peripheral drivers */
844 xpt_init(void *dummy)
846 struct cam_sim *xpt_sim;
847 struct cam_path *path;
848 struct cam_devq *devq;
852 TAILQ_INIT(&xsoftc.xpt_busses);
853 TAILQ_INIT(&xsoftc.ccb_scanq);
854 STAILQ_INIT(&xsoftc.highpowerq);
855 xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
857 mtx_init(&xsoftc.xpt_lock, "XPT lock", NULL, MTX_DEF);
858 mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
859 xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
860 taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
862 #ifdef CAM_BOOT_DELAY
864 * Override this value at compile time to assist our users
865 * who don't use loader to boot a kernel.
867 xsoftc.boot_delay = CAM_BOOT_DELAY;
870 * The xpt layer is, itself, the equivalent of a SIM.
871 * Allow 16 ccbs in the ccb pool for it. This should
872 * give decent parallelism when we probe busses and
873 * perform other XPT functions.
875 devq = cam_simq_alloc(16);
876 xpt_sim = cam_sim_alloc(xptaction,
881 /*mtx*/&xsoftc.xpt_lock,
882 /*max_dev_transactions*/0,
883 /*max_tagged_dev_transactions*/0,
888 mtx_lock(&xsoftc.xpt_lock);
889 if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
890 mtx_unlock(&xsoftc.xpt_lock);
891 printf("xpt_init: xpt_bus_register failed with status %#x,"
892 " failing attach\n", status);
895 mtx_unlock(&xsoftc.xpt_lock);
898 * Looking at the XPT from the SIM layer, the XPT is
899 * the equivalent of a peripheral driver. Allocate
900 * a peripheral driver entry for us.
902 if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
904 CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
905 printf("xpt_init: xpt_create_path failed with status %#x,"
906 " failing attach\n", status);
910 cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
911 path, NULL, 0, xpt_sim);
912 xpt_path_unlock(path);
915 if (cam_num_doneqs < 1)
916 cam_num_doneqs = 1 + mp_ncpus / 6;
917 else if (cam_num_doneqs > MAXCPU)
918 cam_num_doneqs = MAXCPU;
919 for (i = 0; i < cam_num_doneqs; i++) {
920 mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
922 STAILQ_INIT(&cam_doneqs[i].cam_doneq);
923 error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
924 &cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
930 if (cam_num_doneqs < 1) {
931 printf("xpt_init: Cannot init completion queues "
932 "- failing attach\n");
936 * Register a callback for when interrupts are enabled.
938 xsoftc.xpt_config_hook =
939 (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook),
940 M_CAMXPT, M_NOWAIT | M_ZERO);
941 if (xsoftc.xpt_config_hook == NULL) {
942 printf("xpt_init: Cannot malloc config hook "
943 "- failing attach\n");
946 xsoftc.xpt_config_hook->ich_func = xpt_config;
947 if (config_intrhook_establish(xsoftc.xpt_config_hook) != 0) {
948 free (xsoftc.xpt_config_hook, M_CAMXPT);
949 printf("xpt_init: config_intrhook_establish failed "
950 "- failing attach\n");
957 xptregister(struct cam_periph *periph, void *arg)
959 struct cam_sim *xpt_sim;
961 if (periph == NULL) {
962 printf("xptregister: periph was NULL!!\n");
963 return(CAM_REQ_CMP_ERR);
966 xpt_sim = (struct cam_sim *)arg;
967 xpt_sim->softc = periph;
969 periph->softc = NULL;
975 xpt_add_periph(struct cam_periph *periph)
977 struct cam_ed *device;
980 TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
981 device = periph->path->device;
982 status = CAM_REQ_CMP;
983 if (device != NULL) {
984 mtx_lock(&device->target->bus->eb_mtx);
985 device->generation++;
986 SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
987 mtx_unlock(&device->target->bus->eb_mtx);
988 atomic_add_32(&xsoftc.xpt_generation, 1);
995 xpt_remove_periph(struct cam_periph *periph)
997 struct cam_ed *device;
999 device = periph->path->device;
1000 if (device != NULL) {
1001 mtx_lock(&device->target->bus->eb_mtx);
1002 device->generation++;
1003 SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
1004 mtx_unlock(&device->target->bus->eb_mtx);
1005 atomic_add_32(&xsoftc.xpt_generation, 1);
1011 xpt_announce_periph(struct cam_periph *periph, char *announce_string)
1013 struct cam_path *path = periph->path;
1015 cam_periph_assert(periph, MA_OWNED);
1016 periph->flags |= CAM_PERIPH_ANNOUNCED;
1018 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1019 periph->periph_name, periph->unit_number,
1020 path->bus->sim->sim_name,
1021 path->bus->sim->unit_number,
1022 path->bus->sim->bus_id,
1024 path->target->target_id,
1025 (uintmax_t)path->device->lun_id);
1026 printf("%s%d: ", periph->periph_name, periph->unit_number);
1027 if (path->device->protocol == PROTO_SCSI)
1028 scsi_print_inquiry(&path->device->inq_data);
1029 else if (path->device->protocol == PROTO_ATA ||
1030 path->device->protocol == PROTO_SATAPM)
1031 ata_print_ident(&path->device->ident_data);
1032 else if (path->device->protocol == PROTO_SEMB)
1034 (struct sep_identify_data *)&path->device->ident_data);
1036 printf("Unknown protocol device\n");
1037 if (path->device->serial_num_len > 0) {
1038 /* Don't wrap the screen - print only the first 60 chars */
1039 printf("%s%d: Serial Number %.60s\n", periph->periph_name,
1040 periph->unit_number, path->device->serial_num);
1042 /* Announce transport details. */
1043 (*(path->bus->xport->announce))(periph);
1044 /* Announce command queueing. */
1045 if (path->device->inq_flags & SID_CmdQue
1046 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1047 printf("%s%d: Command Queueing enabled\n",
1048 periph->periph_name, periph->unit_number);
1050 /* Announce caller's details if they've passed in. */
1051 if (announce_string != NULL)
1052 printf("%s%d: %s\n", periph->periph_name,
1053 periph->unit_number, announce_string);
1057 xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
1060 printf("%s%d: quirks=0x%b\n", periph->periph_name,
1061 periph->unit_number, quirks, bit_string);
1066 xpt_denounce_periph(struct cam_periph *periph)
1068 struct cam_path *path = periph->path;
1070 cam_periph_assert(periph, MA_OWNED);
1071 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1072 periph->periph_name, periph->unit_number,
1073 path->bus->sim->sim_name,
1074 path->bus->sim->unit_number,
1075 path->bus->sim->bus_id,
1077 path->target->target_id,
1078 (uintmax_t)path->device->lun_id);
1079 printf("%s%d: ", periph->periph_name, periph->unit_number);
1080 if (path->device->protocol == PROTO_SCSI)
1081 scsi_print_inquiry_short(&path->device->inq_data);
1082 else if (path->device->protocol == PROTO_ATA ||
1083 path->device->protocol == PROTO_SATAPM)
1084 ata_print_ident_short(&path->device->ident_data);
1085 else if (path->device->protocol == PROTO_SEMB)
1086 semb_print_ident_short(
1087 (struct sep_identify_data *)&path->device->ident_data);
1089 printf("Unknown protocol device");
1090 if (path->device->serial_num_len > 0)
1091 printf(" s/n %.60s", path->device->serial_num);
1092 printf(" detached\n");
1097 xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
1100 struct ccb_dev_advinfo cdai;
1101 struct scsi_vpd_id_descriptor *idd;
1103 xpt_path_assert(path, MA_OWNED);
1105 memset(&cdai, 0, sizeof(cdai));
1106 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
1107 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
1108 cdai.flags = CDAI_FLAG_NONE;
1111 if (!strcmp(attr, "GEOM::ident"))
1112 cdai.buftype = CDAI_TYPE_SERIAL_NUM;
1113 else if (!strcmp(attr, "GEOM::physpath"))
1114 cdai.buftype = CDAI_TYPE_PHYS_PATH;
1115 else if (strcmp(attr, "GEOM::lunid") == 0 ||
1116 strcmp(attr, "GEOM::lunname") == 0) {
1117 cdai.buftype = CDAI_TYPE_SCSI_DEVID;
1118 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
1122 cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT|M_ZERO);
1123 if (cdai.buf == NULL) {
1127 xpt_action((union ccb *)&cdai); /* can only be synchronous */
1128 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
1129 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
1130 if (cdai.provsiz == 0)
1132 if (cdai.buftype == CDAI_TYPE_SCSI_DEVID) {
1133 if (strcmp(attr, "GEOM::lunid") == 0) {
1134 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1135 cdai.provsiz, scsi_devid_is_lun_naa);
1137 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1138 cdai.provsiz, scsi_devid_is_lun_eui64);
1140 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1141 cdai.provsiz, scsi_devid_is_lun_uuid);
1143 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1144 cdai.provsiz, scsi_devid_is_lun_md5);
1148 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1149 cdai.provsiz, scsi_devid_is_lun_t10);
1151 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1152 cdai.provsiz, scsi_devid_is_lun_name);
1156 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_ASCII) {
1157 if (idd->length < len) {
1158 for (l = 0; l < idd->length; l++)
1159 buf[l] = idd->identifier[l] ?
1160 idd->identifier[l] : ' ';
1164 } else if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_UTF8) {
1165 l = strnlen(idd->identifier, idd->length);
1167 bcopy(idd->identifier, buf, l);
1171 } else if ((idd->id_type & SVPD_ID_TYPE_MASK) == SVPD_ID_TYPE_UUID
1172 && idd->identifier[0] == 0x10) {
1173 if ((idd->length - 2) * 2 + 4 < len) {
1174 for (l = 2, o = 0; l < idd->length; l++) {
1175 if (l == 6 || l == 8 || l == 10 || l == 12)
1176 o += sprintf(buf + o, "-");
1177 o += sprintf(buf + o, "%02x",
1178 idd->identifier[l]);
1183 if (idd->length * 2 < len) {
1184 for (l = 0; l < idd->length; l++)
1185 sprintf(buf + l * 2, "%02x",
1186 idd->identifier[l]);
1192 if (strlcpy(buf, cdai.buf, len) >= len)
1197 if (cdai.buf != NULL)
1198 free(cdai.buf, M_CAMXPT);
1202 static dev_match_ret
1203 xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1206 dev_match_ret retval;
1209 retval = DM_RET_NONE;
1212 * If we aren't given something to match against, that's an error.
1215 return(DM_RET_ERROR);
1218 * If there are no match entries, then this bus matches no
1221 if ((patterns == NULL) || (num_patterns == 0))
1222 return(DM_RET_DESCEND | DM_RET_COPY);
1224 for (i = 0; i < num_patterns; i++) {
1225 struct bus_match_pattern *cur_pattern;
1228 * If the pattern in question isn't for a bus node, we
1229 * aren't interested. However, we do indicate to the
1230 * calling routine that we should continue descending the
1231 * tree, since the user wants to match against lower-level
1234 if (patterns[i].type != DEV_MATCH_BUS) {
1235 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1236 retval |= DM_RET_DESCEND;
1240 cur_pattern = &patterns[i].pattern.bus_pattern;
1243 * If they want to match any bus node, we give them any
1246 if (cur_pattern->flags == BUS_MATCH_ANY) {
1247 /* set the copy flag */
1248 retval |= DM_RET_COPY;
1251 * If we've already decided on an action, go ahead
1254 if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE)
1259 * Not sure why someone would do this...
1261 if (cur_pattern->flags == BUS_MATCH_NONE)
1264 if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
1265 && (cur_pattern->path_id != bus->path_id))
1268 if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
1269 && (cur_pattern->bus_id != bus->sim->bus_id))
1272 if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
1273 && (cur_pattern->unit_number != bus->sim->unit_number))
1276 if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
1277 && (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
1282 * If we get to this point, the user definitely wants
1283 * information on this bus. So tell the caller to copy the
1286 retval |= DM_RET_COPY;
1289 * If the return action has been set to descend, then we
1290 * know that we've already seen a non-bus matching
1291 * expression, therefore we need to further descend the tree.
1292 * This won't change by continuing around the loop, so we
1293 * go ahead and return. If we haven't seen a non-bus
1294 * matching expression, we keep going around the loop until
1295 * we exhaust the matching expressions. We'll set the stop
1296 * flag once we fall out of the loop.
1298 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1303 * If the return action hasn't been set to descend yet, that means
1304 * we haven't seen anything other than bus matching patterns. So
1305 * tell the caller to stop descending the tree -- the user doesn't
1306 * want to match against lower level tree elements.
1308 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1309 retval |= DM_RET_STOP;
1314 static dev_match_ret
1315 xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
1316 struct cam_ed *device)
1318 dev_match_ret retval;
1321 retval = DM_RET_NONE;
1324 * If we aren't given something to match against, that's an error.
1327 return(DM_RET_ERROR);
1330 * If there are no match entries, then this device matches no
1333 if ((patterns == NULL) || (num_patterns == 0))
1334 return(DM_RET_DESCEND | DM_RET_COPY);
1336 for (i = 0; i < num_patterns; i++) {
1337 struct device_match_pattern *cur_pattern;
1338 struct scsi_vpd_device_id *device_id_page;
1341 * If the pattern in question isn't for a device node, we
1342 * aren't interested.
1344 if (patterns[i].type != DEV_MATCH_DEVICE) {
1345 if ((patterns[i].type == DEV_MATCH_PERIPH)
1346 && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
1347 retval |= DM_RET_DESCEND;
1351 cur_pattern = &patterns[i].pattern.device_pattern;
1353 /* Error out if mutually exclusive options are specified. */
1354 if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1355 == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1356 return(DM_RET_ERROR);
1359 * If they want to match any device node, we give them any
1362 if (cur_pattern->flags == DEV_MATCH_ANY)
1366 * Not sure why someone would do this...
1368 if (cur_pattern->flags == DEV_MATCH_NONE)
1371 if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
1372 && (cur_pattern->path_id != device->target->bus->path_id))
1375 if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
1376 && (cur_pattern->target_id != device->target->target_id))
1379 if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
1380 && (cur_pattern->target_lun != device->lun_id))
1383 if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
1384 && (cam_quirkmatch((caddr_t)&device->inq_data,
1385 (caddr_t)&cur_pattern->data.inq_pat,
1386 1, sizeof(cur_pattern->data.inq_pat),
1387 scsi_static_inquiry_match) == NULL))
1390 device_id_page = (struct scsi_vpd_device_id *)device->device_id;
1391 if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
1392 && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
1393 || scsi_devid_match((uint8_t *)device_id_page->desc_list,
1394 device->device_id_len
1395 - SVPD_DEVICE_ID_HDR_LEN,
1396 cur_pattern->data.devid_pat.id,
1397 cur_pattern->data.devid_pat.id_len) != 0))
1402 * If we get to this point, the user definitely wants
1403 * information on this device. So tell the caller to copy
1406 retval |= DM_RET_COPY;
1409 * If the return action has been set to descend, then we
1410 * know that we've already seen a peripheral matching
1411 * expression, therefore we need to further descend the tree.
1412 * This won't change by continuing around the loop, so we
1413 * go ahead and return. If we haven't seen a peripheral
1414 * matching expression, we keep going around the loop until
1415 * we exhaust the matching expressions. We'll set the stop
1416 * flag once we fall out of the loop.
1418 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1423 * If the return action hasn't been set to descend yet, that means
1424 * we haven't seen any peripheral matching patterns. So tell the
1425 * caller to stop descending the tree -- the user doesn't want to
1426 * match against lower level tree elements.
1428 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1429 retval |= DM_RET_STOP;
1435 * Match a single peripheral against any number of match patterns.
1437 static dev_match_ret
1438 xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1439 struct cam_periph *periph)
1441 dev_match_ret retval;
1445 * If we aren't given something to match against, that's an error.
1448 return(DM_RET_ERROR);
1451 * If there are no match entries, then this peripheral matches no
1454 if ((patterns == NULL) || (num_patterns == 0))
1455 return(DM_RET_STOP | DM_RET_COPY);
1458 * There aren't any nodes below a peripheral node, so there's no
1459 * reason to descend the tree any further.
1461 retval = DM_RET_STOP;
1463 for (i = 0; i < num_patterns; i++) {
1464 struct periph_match_pattern *cur_pattern;
1467 * If the pattern in question isn't for a peripheral, we
1468 * aren't interested.
1470 if (patterns[i].type != DEV_MATCH_PERIPH)
1473 cur_pattern = &patterns[i].pattern.periph_pattern;
1476 * If they want to match on anything, then we will do so.
1478 if (cur_pattern->flags == PERIPH_MATCH_ANY) {
1479 /* set the copy flag */
1480 retval |= DM_RET_COPY;
1483 * We've already set the return action to stop,
1484 * since there are no nodes below peripherals in
1491 * Not sure why someone would do this...
1493 if (cur_pattern->flags == PERIPH_MATCH_NONE)
1496 if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
1497 && (cur_pattern->path_id != periph->path->bus->path_id))
1501 * For the target and lun id's, we have to make sure the
1502 * target and lun pointers aren't NULL. The xpt peripheral
1503 * has a wildcard target and device.
1505 if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
1506 && ((periph->path->target == NULL)
1507 ||(cur_pattern->target_id != periph->path->target->target_id)))
1510 if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
1511 && ((periph->path->device == NULL)
1512 || (cur_pattern->target_lun != periph->path->device->lun_id)))
1515 if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
1516 && (cur_pattern->unit_number != periph->unit_number))
1519 if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
1520 && (strncmp(cur_pattern->periph_name, periph->periph_name,
1525 * If we get to this point, the user definitely wants
1526 * information on this peripheral. So tell the caller to
1527 * copy the data out.
1529 retval |= DM_RET_COPY;
1532 * The return action has already been set to stop, since
1533 * peripherals don't have any nodes below them in the EDT.
1539 * If we get to this point, the peripheral that was passed in
1540 * doesn't match any of the patterns.
1546 xptedtbusfunc(struct cam_eb *bus, void *arg)
1548 struct ccb_dev_match *cdm;
1549 struct cam_et *target;
1550 dev_match_ret retval;
1552 cdm = (struct ccb_dev_match *)arg;
1555 * If our position is for something deeper in the tree, that means
1556 * that we've already seen this node. So, we keep going down.
1558 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1559 && (cdm->pos.cookie.bus == bus)
1560 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1561 && (cdm->pos.cookie.target != NULL))
1562 retval = DM_RET_DESCEND;
1564 retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
1567 * If we got an error, bail out of the search.
1569 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1570 cdm->status = CAM_DEV_MATCH_ERROR;
1575 * If the copy flag is set, copy this bus out.
1577 if (retval & DM_RET_COPY) {
1580 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1581 sizeof(struct dev_match_result));
1584 * If we don't have enough space to put in another
1585 * match result, save our position and tell the
1586 * user there are more devices to check.
1588 if (spaceleft < sizeof(struct dev_match_result)) {
1589 bzero(&cdm->pos, sizeof(cdm->pos));
1590 cdm->pos.position_type =
1591 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
1593 cdm->pos.cookie.bus = bus;
1594 cdm->pos.generations[CAM_BUS_GENERATION]=
1595 xsoftc.bus_generation;
1596 cdm->status = CAM_DEV_MATCH_MORE;
1599 j = cdm->num_matches;
1601 cdm->matches[j].type = DEV_MATCH_BUS;
1602 cdm->matches[j].result.bus_result.path_id = bus->path_id;
1603 cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
1604 cdm->matches[j].result.bus_result.unit_number =
1605 bus->sim->unit_number;
1606 strncpy(cdm->matches[j].result.bus_result.dev_name,
1607 bus->sim->sim_name, DEV_IDLEN);
1611 * If the user is only interested in busses, there's no
1612 * reason to descend to the next level in the tree.
1614 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1618 * If there is a target generation recorded, check it to
1619 * make sure the target list hasn't changed.
1621 mtx_lock(&bus->eb_mtx);
1622 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1623 && (cdm->pos.cookie.bus == bus)
1624 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1625 && (cdm->pos.cookie.target != NULL)) {
1626 if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
1628 mtx_unlock(&bus->eb_mtx);
1629 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1632 target = (struct cam_et *)cdm->pos.cookie.target;
1636 mtx_unlock(&bus->eb_mtx);
1638 return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
1642 xptedttargetfunc(struct cam_et *target, void *arg)
1644 struct ccb_dev_match *cdm;
1646 struct cam_ed *device;
1648 cdm = (struct ccb_dev_match *)arg;
1652 * If there is a device list generation recorded, check it to
1653 * make sure the device list hasn't changed.
1655 mtx_lock(&bus->eb_mtx);
1656 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1657 && (cdm->pos.cookie.bus == bus)
1658 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1659 && (cdm->pos.cookie.target == target)
1660 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1661 && (cdm->pos.cookie.device != NULL)) {
1662 if (cdm->pos.generations[CAM_DEV_GENERATION] !=
1663 target->generation) {
1664 mtx_unlock(&bus->eb_mtx);
1665 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1668 device = (struct cam_ed *)cdm->pos.cookie.device;
1672 mtx_unlock(&bus->eb_mtx);
1674 return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
1678 xptedtdevicefunc(struct cam_ed *device, void *arg)
1681 struct cam_periph *periph;
1682 struct ccb_dev_match *cdm;
1683 dev_match_ret retval;
1685 cdm = (struct ccb_dev_match *)arg;
1686 bus = device->target->bus;
1689 * If our position is for something deeper in the tree, that means
1690 * that we've already seen this node. So, we keep going down.
1692 if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1693 && (cdm->pos.cookie.device == device)
1694 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1695 && (cdm->pos.cookie.periph != NULL))
1696 retval = DM_RET_DESCEND;
1698 retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
1701 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1702 cdm->status = CAM_DEV_MATCH_ERROR;
1707 * If the copy flag is set, copy this device out.
1709 if (retval & DM_RET_COPY) {
1712 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1713 sizeof(struct dev_match_result));
1716 * If we don't have enough space to put in another
1717 * match result, save our position and tell the
1718 * user there are more devices to check.
1720 if (spaceleft < sizeof(struct dev_match_result)) {
1721 bzero(&cdm->pos, sizeof(cdm->pos));
1722 cdm->pos.position_type =
1723 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1724 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
1726 cdm->pos.cookie.bus = device->target->bus;
1727 cdm->pos.generations[CAM_BUS_GENERATION]=
1728 xsoftc.bus_generation;
1729 cdm->pos.cookie.target = device->target;
1730 cdm->pos.generations[CAM_TARGET_GENERATION] =
1731 device->target->bus->generation;
1732 cdm->pos.cookie.device = device;
1733 cdm->pos.generations[CAM_DEV_GENERATION] =
1734 device->target->generation;
1735 cdm->status = CAM_DEV_MATCH_MORE;
1738 j = cdm->num_matches;
1740 cdm->matches[j].type = DEV_MATCH_DEVICE;
1741 cdm->matches[j].result.device_result.path_id =
1742 device->target->bus->path_id;
1743 cdm->matches[j].result.device_result.target_id =
1744 device->target->target_id;
1745 cdm->matches[j].result.device_result.target_lun =
1747 cdm->matches[j].result.device_result.protocol =
1749 bcopy(&device->inq_data,
1750 &cdm->matches[j].result.device_result.inq_data,
1751 sizeof(struct scsi_inquiry_data));
1752 bcopy(&device->ident_data,
1753 &cdm->matches[j].result.device_result.ident_data,
1754 sizeof(struct ata_params));
1756 /* Let the user know whether this device is unconfigured */
1757 if (device->flags & CAM_DEV_UNCONFIGURED)
1758 cdm->matches[j].result.device_result.flags =
1759 DEV_RESULT_UNCONFIGURED;
1761 cdm->matches[j].result.device_result.flags =
1766 * If the user isn't interested in peripherals, don't descend
1767 * the tree any further.
1769 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1773 * If there is a peripheral list generation recorded, make sure
1774 * it hasn't changed.
1777 mtx_lock(&bus->eb_mtx);
1778 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1779 && (cdm->pos.cookie.bus == bus)
1780 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1781 && (cdm->pos.cookie.target == device->target)
1782 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1783 && (cdm->pos.cookie.device == device)
1784 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1785 && (cdm->pos.cookie.periph != NULL)) {
1786 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1787 device->generation) {
1788 mtx_unlock(&bus->eb_mtx);
1790 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1793 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1797 mtx_unlock(&bus->eb_mtx);
1800 return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
1804 xptedtperiphfunc(struct cam_periph *periph, void *arg)
1806 struct ccb_dev_match *cdm;
1807 dev_match_ret retval;
1809 cdm = (struct ccb_dev_match *)arg;
1811 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1813 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1814 cdm->status = CAM_DEV_MATCH_ERROR;
1819 * If the copy flag is set, copy this peripheral out.
1821 if (retval & DM_RET_COPY) {
1824 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1825 sizeof(struct dev_match_result));
1828 * If we don't have enough space to put in another
1829 * match result, save our position and tell the
1830 * user there are more devices to check.
1832 if (spaceleft < sizeof(struct dev_match_result)) {
1833 bzero(&cdm->pos, sizeof(cdm->pos));
1834 cdm->pos.position_type =
1835 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1836 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
1839 cdm->pos.cookie.bus = periph->path->bus;
1840 cdm->pos.generations[CAM_BUS_GENERATION]=
1841 xsoftc.bus_generation;
1842 cdm->pos.cookie.target = periph->path->target;
1843 cdm->pos.generations[CAM_TARGET_GENERATION] =
1844 periph->path->bus->generation;
1845 cdm->pos.cookie.device = periph->path->device;
1846 cdm->pos.generations[CAM_DEV_GENERATION] =
1847 periph->path->target->generation;
1848 cdm->pos.cookie.periph = periph;
1849 cdm->pos.generations[CAM_PERIPH_GENERATION] =
1850 periph->path->device->generation;
1851 cdm->status = CAM_DEV_MATCH_MORE;
1855 j = cdm->num_matches;
1857 cdm->matches[j].type = DEV_MATCH_PERIPH;
1858 cdm->matches[j].result.periph_result.path_id =
1859 periph->path->bus->path_id;
1860 cdm->matches[j].result.periph_result.target_id =
1861 periph->path->target->target_id;
1862 cdm->matches[j].result.periph_result.target_lun =
1863 periph->path->device->lun_id;
1864 cdm->matches[j].result.periph_result.unit_number =
1865 periph->unit_number;
1866 strncpy(cdm->matches[j].result.periph_result.periph_name,
1867 periph->periph_name, DEV_IDLEN);
1874 xptedtmatch(struct ccb_dev_match *cdm)
1879 cdm->num_matches = 0;
1882 * Check the bus list generation. If it has changed, the user
1883 * needs to reset everything and start over.
1886 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1887 && (cdm->pos.cookie.bus != NULL)) {
1888 if (cdm->pos.generations[CAM_BUS_GENERATION] !=
1889 xsoftc.bus_generation) {
1891 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1894 bus = (struct cam_eb *)cdm->pos.cookie.bus;
1900 ret = xptbustraverse(bus, xptedtbusfunc, cdm);
1903 * If we get back 0, that means that we had to stop before fully
1904 * traversing the EDT. It also means that one of the subroutines
1905 * has set the status field to the proper value. If we get back 1,
1906 * we've fully traversed the EDT and copied out any matching entries.
1909 cdm->status = CAM_DEV_MATCH_LAST;
1915 xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
1917 struct cam_periph *periph;
1918 struct ccb_dev_match *cdm;
1920 cdm = (struct ccb_dev_match *)arg;
1923 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
1924 && (cdm->pos.cookie.pdrv == pdrv)
1925 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1926 && (cdm->pos.cookie.periph != NULL)) {
1927 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1928 (*pdrv)->generation) {
1930 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1933 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1939 return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
1943 xptplistperiphfunc(struct cam_periph *periph, void *arg)
1945 struct ccb_dev_match *cdm;
1946 dev_match_ret retval;
1948 cdm = (struct ccb_dev_match *)arg;
1950 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1952 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1953 cdm->status = CAM_DEV_MATCH_ERROR;
1958 * If the copy flag is set, copy this peripheral out.
1960 if (retval & DM_RET_COPY) {
1963 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1964 sizeof(struct dev_match_result));
1967 * If we don't have enough space to put in another
1968 * match result, save our position and tell the
1969 * user there are more devices to check.
1971 if (spaceleft < sizeof(struct dev_match_result)) {
1972 struct periph_driver **pdrv;
1975 bzero(&cdm->pos, sizeof(cdm->pos));
1976 cdm->pos.position_type =
1977 CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
1981 * This may look a bit non-sensical, but it is
1982 * actually quite logical. There are very few
1983 * peripheral drivers, and bloating every peripheral
1984 * structure with a pointer back to its parent
1985 * peripheral driver linker set entry would cost
1986 * more in the long run than doing this quick lookup.
1988 for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
1989 if (strcmp((*pdrv)->driver_name,
1990 periph->periph_name) == 0)
1994 if (*pdrv == NULL) {
1995 cdm->status = CAM_DEV_MATCH_ERROR;
1999 cdm->pos.cookie.pdrv = pdrv;
2001 * The periph generation slot does double duty, as
2002 * does the periph pointer slot. They are used for
2003 * both edt and pdrv lookups and positioning.
2005 cdm->pos.cookie.periph = periph;
2006 cdm->pos.generations[CAM_PERIPH_GENERATION] =
2007 (*pdrv)->generation;
2008 cdm->status = CAM_DEV_MATCH_MORE;
2012 j = cdm->num_matches;
2014 cdm->matches[j].type = DEV_MATCH_PERIPH;
2015 cdm->matches[j].result.periph_result.path_id =
2016 periph->path->bus->path_id;
2019 * The transport layer peripheral doesn't have a target or
2022 if (periph->path->target)
2023 cdm->matches[j].result.periph_result.target_id =
2024 periph->path->target->target_id;
2026 cdm->matches[j].result.periph_result.target_id =
2027 CAM_TARGET_WILDCARD;
2029 if (periph->path->device)
2030 cdm->matches[j].result.periph_result.target_lun =
2031 periph->path->device->lun_id;
2033 cdm->matches[j].result.periph_result.target_lun =
2036 cdm->matches[j].result.periph_result.unit_number =
2037 periph->unit_number;
2038 strncpy(cdm->matches[j].result.periph_result.periph_name,
2039 periph->periph_name, DEV_IDLEN);
2046 xptperiphlistmatch(struct ccb_dev_match *cdm)
2050 cdm->num_matches = 0;
2053 * At this point in the edt traversal function, we check the bus
2054 * list generation to make sure that no busses have been added or
2055 * removed since the user last sent a XPT_DEV_MATCH ccb through.
2056 * For the peripheral driver list traversal function, however, we
2057 * don't have to worry about new peripheral driver types coming or
2058 * going; they're in a linker set, and therefore can't change
2059 * without a recompile.
2062 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2063 && (cdm->pos.cookie.pdrv != NULL))
2064 ret = xptpdrvtraverse(
2065 (struct periph_driver **)cdm->pos.cookie.pdrv,
2066 xptplistpdrvfunc, cdm);
2068 ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
2071 * If we get back 0, that means that we had to stop before fully
2072 * traversing the peripheral driver tree. It also means that one of
2073 * the subroutines has set the status field to the proper value. If
2074 * we get back 1, we've fully traversed the EDT and copied out any
2078 cdm->status = CAM_DEV_MATCH_LAST;
2084 xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
2086 struct cam_eb *bus, *next_bus;
2094 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
2102 for (; bus != NULL; bus = next_bus) {
2103 retval = tr_func(bus, arg);
2105 xpt_release_bus(bus);
2109 next_bus = TAILQ_NEXT(bus, links);
2111 next_bus->refcount++;
2113 xpt_release_bus(bus);
2119 xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
2120 xpt_targetfunc_t *tr_func, void *arg)
2122 struct cam_et *target, *next_target;
2127 target = start_target;
2129 mtx_lock(&bus->eb_mtx);
2130 target = TAILQ_FIRST(&bus->et_entries);
2131 if (target == NULL) {
2132 mtx_unlock(&bus->eb_mtx);
2136 mtx_unlock(&bus->eb_mtx);
2138 for (; target != NULL; target = next_target) {
2139 retval = tr_func(target, arg);
2141 xpt_release_target(target);
2144 mtx_lock(&bus->eb_mtx);
2145 next_target = TAILQ_NEXT(target, links);
2147 next_target->refcount++;
2148 mtx_unlock(&bus->eb_mtx);
2149 xpt_release_target(target);
2155 xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
2156 xpt_devicefunc_t *tr_func, void *arg)
2159 struct cam_ed *device, *next_device;
2165 device = start_device;
2167 mtx_lock(&bus->eb_mtx);
2168 device = TAILQ_FIRST(&target->ed_entries);
2169 if (device == NULL) {
2170 mtx_unlock(&bus->eb_mtx);
2174 mtx_unlock(&bus->eb_mtx);
2176 for (; device != NULL; device = next_device) {
2177 mtx_lock(&device->device_mtx);
2178 retval = tr_func(device, arg);
2179 mtx_unlock(&device->device_mtx);
2181 xpt_release_device(device);
2184 mtx_lock(&bus->eb_mtx);
2185 next_device = TAILQ_NEXT(device, links);
2187 next_device->refcount++;
2188 mtx_unlock(&bus->eb_mtx);
2189 xpt_release_device(device);
2195 xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
2196 xpt_periphfunc_t *tr_func, void *arg)
2199 struct cam_periph *periph, *next_periph;
2204 bus = device->target->bus;
2206 periph = start_periph;
2209 mtx_lock(&bus->eb_mtx);
2210 periph = SLIST_FIRST(&device->periphs);
2211 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2212 periph = SLIST_NEXT(periph, periph_links);
2213 if (periph == NULL) {
2214 mtx_unlock(&bus->eb_mtx);
2219 mtx_unlock(&bus->eb_mtx);
2222 for (; periph != NULL; periph = next_periph) {
2223 retval = tr_func(periph, arg);
2225 cam_periph_release_locked(periph);
2229 mtx_lock(&bus->eb_mtx);
2230 next_periph = SLIST_NEXT(periph, periph_links);
2231 while (next_periph != NULL &&
2232 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2233 next_periph = SLIST_NEXT(next_periph, periph_links);
2235 next_periph->refcount++;
2236 mtx_unlock(&bus->eb_mtx);
2238 cam_periph_release_locked(periph);
2244 xptpdrvtraverse(struct periph_driver **start_pdrv,
2245 xpt_pdrvfunc_t *tr_func, void *arg)
2247 struct periph_driver **pdrv;
2253 * We don't traverse the peripheral driver list like we do the
2254 * other lists, because it is a linker set, and therefore cannot be
2255 * changed during runtime. If the peripheral driver list is ever
2256 * re-done to be something other than a linker set (i.e. it can
2257 * change while the system is running), the list traversal should
2258 * be modified to work like the other traversal functions.
2260 for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
2261 *pdrv != NULL; pdrv++) {
2262 retval = tr_func(pdrv, arg);
2272 xptpdperiphtraverse(struct periph_driver **pdrv,
2273 struct cam_periph *start_periph,
2274 xpt_periphfunc_t *tr_func, void *arg)
2276 struct cam_periph *periph, *next_periph;
2282 periph = start_periph;
2285 periph = TAILQ_FIRST(&(*pdrv)->units);
2286 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2287 periph = TAILQ_NEXT(periph, unit_links);
2288 if (periph == NULL) {
2295 for (; periph != NULL; periph = next_periph) {
2296 cam_periph_lock(periph);
2297 retval = tr_func(periph, arg);
2298 cam_periph_unlock(periph);
2300 cam_periph_release(periph);
2304 next_periph = TAILQ_NEXT(periph, unit_links);
2305 while (next_periph != NULL &&
2306 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2307 next_periph = TAILQ_NEXT(next_periph, unit_links);
2309 next_periph->refcount++;
2311 cam_periph_release(periph);
2317 xptdefbusfunc(struct cam_eb *bus, void *arg)
2319 struct xpt_traverse_config *tr_config;
2321 tr_config = (struct xpt_traverse_config *)arg;
2323 if (tr_config->depth == XPT_DEPTH_BUS) {
2324 xpt_busfunc_t *tr_func;
2326 tr_func = (xpt_busfunc_t *)tr_config->tr_func;
2328 return(tr_func(bus, tr_config->tr_arg));
2330 return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
2334 xptdeftargetfunc(struct cam_et *target, void *arg)
2336 struct xpt_traverse_config *tr_config;
2338 tr_config = (struct xpt_traverse_config *)arg;
2340 if (tr_config->depth == XPT_DEPTH_TARGET) {
2341 xpt_targetfunc_t *tr_func;
2343 tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
2345 return(tr_func(target, tr_config->tr_arg));
2347 return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
2351 xptdefdevicefunc(struct cam_ed *device, void *arg)
2353 struct xpt_traverse_config *tr_config;
2355 tr_config = (struct xpt_traverse_config *)arg;
2357 if (tr_config->depth == XPT_DEPTH_DEVICE) {
2358 xpt_devicefunc_t *tr_func;
2360 tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
2362 return(tr_func(device, tr_config->tr_arg));
2364 return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
2368 xptdefperiphfunc(struct cam_periph *periph, void *arg)
2370 struct xpt_traverse_config *tr_config;
2371 xpt_periphfunc_t *tr_func;
2373 tr_config = (struct xpt_traverse_config *)arg;
2375 tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
2378 * Unlike the other default functions, we don't check for depth
2379 * here. The peripheral driver level is the last level in the EDT,
2380 * so if we're here, we should execute the function in question.
2382 return(tr_func(periph, tr_config->tr_arg));
2386 * Execute the given function for every bus in the EDT.
2389 xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
2391 struct xpt_traverse_config tr_config;
2393 tr_config.depth = XPT_DEPTH_BUS;
2394 tr_config.tr_func = tr_func;
2395 tr_config.tr_arg = arg;
2397 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2401 * Execute the given function for every device in the EDT.
2404 xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
2406 struct xpt_traverse_config tr_config;
2408 tr_config.depth = XPT_DEPTH_DEVICE;
2409 tr_config.tr_func = tr_func;
2410 tr_config.tr_arg = arg;
2412 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2416 xptsetasyncfunc(struct cam_ed *device, void *arg)
2418 struct cam_path path;
2419 struct ccb_getdev cgd;
2420 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2423 * Don't report unconfigured devices (Wildcard devs,
2424 * devices only for target mode, device instances
2425 * that have been invalidated but are waiting for
2426 * their last reference count to be released).
2428 if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
2431 xpt_compile_path(&path,
2433 device->target->bus->path_id,
2434 device->target->target_id,
2436 xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
2437 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
2438 xpt_action((union ccb *)&cgd);
2439 csa->callback(csa->callback_arg,
2442 xpt_release_path(&path);
2448 xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
2450 struct cam_path path;
2451 struct ccb_pathinq cpi;
2452 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2454 xpt_compile_path(&path, /*periph*/NULL,
2456 CAM_TARGET_WILDCARD,
2458 xpt_path_lock(&path);
2459 xpt_setup_ccb(&cpi.ccb_h, &path, CAM_PRIORITY_NORMAL);
2460 cpi.ccb_h.func_code = XPT_PATH_INQ;
2461 xpt_action((union ccb *)&cpi);
2462 csa->callback(csa->callback_arg,
2465 xpt_path_unlock(&path);
2466 xpt_release_path(&path);
2472 xpt_action(union ccb *start_ccb)
2475 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_action\n"));
2477 start_ccb->ccb_h.status = CAM_REQ_INPROG;
2478 (*(start_ccb->ccb_h.path->bus->xport->action))(start_ccb);
2482 xpt_action_default(union ccb *start_ccb)
2484 struct cam_path *path;
2485 struct cam_sim *sim;
2488 path = start_ccb->ccb_h.path;
2489 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_action_default\n"));
2491 switch (start_ccb->ccb_h.func_code) {
2494 struct cam_ed *device;
2497 * For the sake of compatibility with SCSI-1
2498 * devices that may not understand the identify
2499 * message, we include lun information in the
2500 * second byte of all commands. SCSI-1 specifies
2501 * that luns are a 3 bit value and reserves only 3
2502 * bits for lun information in the CDB. Later
2503 * revisions of the SCSI spec allow for more than 8
2504 * luns, but have deprecated lun information in the
2505 * CDB. So, if the lun won't fit, we must omit.
2507 * Also be aware that during initial probing for devices,
2508 * the inquiry information is unknown but initialized to 0.
2509 * This means that this code will be exercised while probing
2510 * devices with an ANSI revision greater than 2.
2512 device = path->device;
2513 if (device->protocol_version <= SCSI_REV_2
2514 && start_ccb->ccb_h.target_lun < 8
2515 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
2517 start_ccb->csio.cdb_io.cdb_bytes[1] |=
2518 start_ccb->ccb_h.target_lun << 5;
2520 start_ccb->csio.scsi_status = SCSI_STATUS_OK;
2524 case XPT_CONT_TARGET_IO:
2525 start_ccb->csio.sense_resid = 0;
2526 start_ccb->csio.resid = 0;
2529 if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
2530 start_ccb->ataio.resid = 0;
2536 struct cam_devq *devq;
2538 devq = path->bus->sim->devq;
2539 mtx_lock(&devq->send_mtx);
2540 cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
2541 if (xpt_schedule_devq(devq, path->device) != 0)
2543 mtx_unlock(&devq->send_mtx);
2546 case XPT_CALC_GEOMETRY:
2547 /* Filter out garbage */
2548 if (start_ccb->ccg.block_size == 0
2549 || start_ccb->ccg.volume_size == 0) {
2550 start_ccb->ccg.cylinders = 0;
2551 start_ccb->ccg.heads = 0;
2552 start_ccb->ccg.secs_per_track = 0;
2553 start_ccb->ccb_h.status = CAM_REQ_CMP;
2556 #if defined(PC98) || defined(__sparc64__)
2558 * In a PC-98 system, geometry translation depens on
2559 * the "real" device geometry obtained from mode page 4.
2560 * SCSI geometry translation is performed in the
2561 * initialization routine of the SCSI BIOS and the result
2562 * stored in host memory. If the translation is available
2563 * in host memory, use it. If not, rely on the default
2564 * translation the device driver performs.
2565 * For sparc64, we may need adjust the geometry of large
2566 * disks in order to fit the limitations of the 16-bit
2567 * fields of the VTOC8 disk label.
2569 if (scsi_da_bios_params(&start_ccb->ccg) != 0) {
2570 start_ccb->ccb_h.status = CAM_REQ_CMP;
2577 union ccb* abort_ccb;
2579 abort_ccb = start_ccb->cab.abort_ccb;
2580 if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
2582 if (abort_ccb->ccb_h.pinfo.index >= 0) {
2583 struct cam_ccbq *ccbq;
2584 struct cam_ed *device;
2586 device = abort_ccb->ccb_h.path->device;
2587 ccbq = &device->ccbq;
2588 cam_ccbq_remove_ccb(ccbq, abort_ccb);
2589 abort_ccb->ccb_h.status =
2590 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2591 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2592 xpt_done(abort_ccb);
2593 start_ccb->ccb_h.status = CAM_REQ_CMP;
2596 if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
2597 && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
2599 * We've caught this ccb en route to
2600 * the SIM. Flag it for abort and the
2601 * SIM will do so just before starting
2602 * real work on the CCB.
2604 abort_ccb->ccb_h.status =
2605 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2606 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2607 start_ccb->ccb_h.status = CAM_REQ_CMP;
2611 if (XPT_FC_IS_QUEUED(abort_ccb)
2612 && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
2614 * It's already completed but waiting
2615 * for our SWI to get to it.
2617 start_ccb->ccb_h.status = CAM_UA_ABORT;
2621 * If we weren't able to take care of the abort request
2622 * in the XPT, pass the request down to the SIM for processing.
2626 case XPT_ACCEPT_TARGET_IO:
2628 case XPT_IMMED_NOTIFY:
2629 case XPT_NOTIFY_ACK:
2631 case XPT_IMMEDIATE_NOTIFY:
2632 case XPT_NOTIFY_ACKNOWLEDGE:
2633 case XPT_GET_SIM_KNOB:
2634 case XPT_SET_SIM_KNOB:
2635 case XPT_GET_TRAN_SETTINGS:
2636 case XPT_SET_TRAN_SETTINGS:
2639 sim = path->bus->sim;
2641 if (mtx && !mtx_owned(mtx))
2645 (*(sim->sim_action))(sim, start_ccb);
2649 case XPT_PATH_STATS:
2650 start_ccb->cpis.last_reset = path->bus->last_reset;
2651 start_ccb->ccb_h.status = CAM_REQ_CMP;
2658 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2659 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2661 struct ccb_getdev *cgd;
2663 cgd = &start_ccb->cgd;
2664 cgd->protocol = dev->protocol;
2665 cgd->inq_data = dev->inq_data;
2666 cgd->ident_data = dev->ident_data;
2667 cgd->inq_flags = dev->inq_flags;
2668 cgd->ccb_h.status = CAM_REQ_CMP;
2669 cgd->serial_num_len = dev->serial_num_len;
2670 if ((dev->serial_num_len > 0)
2671 && (dev->serial_num != NULL))
2672 bcopy(dev->serial_num, cgd->serial_num,
2673 dev->serial_num_len);
2677 case XPT_GDEV_STATS:
2679 struct ccb_getdevstats *cgds = &start_ccb->cgds;
2680 struct cam_ed *dev = path->device;
2681 struct cam_eb *bus = path->bus;
2682 struct cam_et *tar = path->target;
2683 struct cam_devq *devq = bus->sim->devq;
2685 mtx_lock(&devq->send_mtx);
2686 cgds->dev_openings = dev->ccbq.dev_openings;
2687 cgds->dev_active = dev->ccbq.dev_active;
2688 cgds->allocated = dev->ccbq.allocated;
2689 cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
2690 cgds->held = cgds->allocated - cgds->dev_active - cgds->queued;
2691 cgds->last_reset = tar->last_reset;
2692 cgds->maxtags = dev->maxtags;
2693 cgds->mintags = dev->mintags;
2694 if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
2695 cgds->last_reset = bus->last_reset;
2696 mtx_unlock(&devq->send_mtx);
2697 cgds->ccb_h.status = CAM_REQ_CMP;
2702 struct cam_periph *nperiph;
2703 struct periph_list *periph_head;
2704 struct ccb_getdevlist *cgdl;
2706 struct cam_ed *device;
2713 * Don't want anyone mucking with our data.
2715 device = path->device;
2716 periph_head = &device->periphs;
2717 cgdl = &start_ccb->cgdl;
2720 * Check and see if the list has changed since the user
2721 * last requested a list member. If so, tell them that the
2722 * list has changed, and therefore they need to start over
2723 * from the beginning.
2725 if ((cgdl->index != 0) &&
2726 (cgdl->generation != device->generation)) {
2727 cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
2732 * Traverse the list of peripherals and attempt to find
2733 * the requested peripheral.
2735 for (nperiph = SLIST_FIRST(periph_head), i = 0;
2736 (nperiph != NULL) && (i <= cgdl->index);
2737 nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
2738 if (i == cgdl->index) {
2739 strncpy(cgdl->periph_name,
2740 nperiph->periph_name,
2742 cgdl->unit_number = nperiph->unit_number;
2747 cgdl->status = CAM_GDEVLIST_ERROR;
2751 if (nperiph == NULL)
2752 cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
2754 cgdl->status = CAM_GDEVLIST_MORE_DEVS;
2757 cgdl->generation = device->generation;
2759 cgdl->ccb_h.status = CAM_REQ_CMP;
2764 dev_pos_type position_type;
2765 struct ccb_dev_match *cdm;
2767 cdm = &start_ccb->cdm;
2770 * There are two ways of getting at information in the EDT.
2771 * The first way is via the primary EDT tree. It starts
2772 * with a list of busses, then a list of targets on a bus,
2773 * then devices/luns on a target, and then peripherals on a
2774 * device/lun. The "other" way is by the peripheral driver
2775 * lists. The peripheral driver lists are organized by
2776 * peripheral driver. (obviously) So it makes sense to
2777 * use the peripheral driver list if the user is looking
2778 * for something like "da1", or all "da" devices. If the
2779 * user is looking for something on a particular bus/target
2780 * or lun, it's generally better to go through the EDT tree.
2783 if (cdm->pos.position_type != CAM_DEV_POS_NONE)
2784 position_type = cdm->pos.position_type;
2788 position_type = CAM_DEV_POS_NONE;
2790 for (i = 0; i < cdm->num_patterns; i++) {
2791 if ((cdm->patterns[i].type == DEV_MATCH_BUS)
2792 ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
2793 position_type = CAM_DEV_POS_EDT;
2798 if (cdm->num_patterns == 0)
2799 position_type = CAM_DEV_POS_EDT;
2800 else if (position_type == CAM_DEV_POS_NONE)
2801 position_type = CAM_DEV_POS_PDRV;
2804 switch(position_type & CAM_DEV_POS_TYPEMASK) {
2805 case CAM_DEV_POS_EDT:
2808 case CAM_DEV_POS_PDRV:
2809 xptperiphlistmatch(cdm);
2812 cdm->status = CAM_DEV_MATCH_ERROR;
2816 if (cdm->status == CAM_DEV_MATCH_ERROR)
2817 start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2819 start_ccb->ccb_h.status = CAM_REQ_CMP;
2825 struct ccb_setasync *csa;
2826 struct async_node *cur_entry;
2827 struct async_list *async_head;
2830 csa = &start_ccb->csa;
2831 added = csa->event_enable;
2832 async_head = &path->device->asyncs;
2835 * If there is already an entry for us, simply
2838 cur_entry = SLIST_FIRST(async_head);
2839 while (cur_entry != NULL) {
2840 if ((cur_entry->callback_arg == csa->callback_arg)
2841 && (cur_entry->callback == csa->callback))
2843 cur_entry = SLIST_NEXT(cur_entry, links);
2846 if (cur_entry != NULL) {
2848 * If the request has no flags set,
2851 added &= ~cur_entry->event_enable;
2852 if (csa->event_enable == 0) {
2853 SLIST_REMOVE(async_head, cur_entry,
2855 xpt_release_device(path->device);
2856 free(cur_entry, M_CAMXPT);
2858 cur_entry->event_enable = csa->event_enable;
2860 csa->event_enable = added;
2862 cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
2864 if (cur_entry == NULL) {
2865 csa->ccb_h.status = CAM_RESRC_UNAVAIL;
2868 cur_entry->event_enable = csa->event_enable;
2869 cur_entry->event_lock = (path->bus->sim->mtx &&
2870 mtx_owned(path->bus->sim->mtx)) ? 1 : 0;
2871 cur_entry->callback_arg = csa->callback_arg;
2872 cur_entry->callback = csa->callback;
2873 SLIST_INSERT_HEAD(async_head, cur_entry, links);
2874 xpt_acquire_device(path->device);
2876 start_ccb->ccb_h.status = CAM_REQ_CMP;
2881 struct ccb_relsim *crs;
2884 crs = &start_ccb->crs;
2888 crs->ccb_h.status = CAM_DEV_NOT_THERE;
2892 if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
2894 /* Don't ever go below one opening */
2895 if (crs->openings > 0) {
2896 xpt_dev_ccbq_resize(path, crs->openings);
2899 "number of openings is now %d\n",
2905 mtx_lock(&dev->sim->devq->send_mtx);
2906 if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
2908 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
2911 * Just extend the old timeout and decrement
2912 * the freeze count so that a single timeout
2913 * is sufficient for releasing the queue.
2915 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2916 callout_stop(&dev->callout);
2919 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2922 callout_reset_sbt(&dev->callout,
2923 SBT_1MS * crs->release_timeout, 0,
2924 xpt_release_devq_timeout, dev, 0);
2926 dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
2930 if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
2932 if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
2934 * Decrement the freeze count so that a single
2935 * completion is still sufficient to unfreeze
2938 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2941 dev->flags |= CAM_DEV_REL_ON_COMPLETE;
2942 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2946 if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
2948 if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
2949 || (dev->ccbq.dev_active == 0)) {
2951 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2954 dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
2955 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2958 mtx_unlock(&dev->sim->devq->send_mtx);
2960 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
2961 xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
2962 start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
2963 start_ccb->ccb_h.status = CAM_REQ_CMP;
2967 struct cam_path *oldpath;
2969 /* Check that all request bits are supported. */
2970 if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
2971 start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
2975 cam_dflags = CAM_DEBUG_NONE;
2976 if (cam_dpath != NULL) {
2977 oldpath = cam_dpath;
2979 xpt_free_path(oldpath);
2981 if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
2982 if (xpt_create_path(&cam_dpath, NULL,
2983 start_ccb->ccb_h.path_id,
2984 start_ccb->ccb_h.target_id,
2985 start_ccb->ccb_h.target_lun) !=
2987 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
2989 cam_dflags = start_ccb->cdbg.flags;
2990 start_ccb->ccb_h.status = CAM_REQ_CMP;
2991 xpt_print(cam_dpath, "debugging flags now %x\n",
2995 start_ccb->ccb_h.status = CAM_REQ_CMP;
2999 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
3000 xpt_freeze_devq(path, 1);
3001 start_ccb->ccb_h.status = CAM_REQ_CMP;
3003 case XPT_REPROBE_LUN:
3004 xpt_async(AC_INQ_CHANGED, path, NULL);
3005 start_ccb->ccb_h.status = CAM_REQ_CMP;
3006 xpt_done(start_ccb);
3013 printf("%s: CCB type %#x not supported\n", __func__,
3014 start_ccb->ccb_h.func_code);
3015 start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
3016 if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
3017 xpt_done(start_ccb);
3024 xpt_polled_action(union ccb *start_ccb)
3027 struct cam_sim *sim;
3028 struct cam_devq *devq;
3032 timeout = start_ccb->ccb_h.timeout * 10;
3033 sim = start_ccb->ccb_h.path->bus->sim;
3036 dev = start_ccb->ccb_h.path->device;
3038 mtx_unlock(&dev->device_mtx);
3041 * Steal an opening so that no other queued requests
3042 * can get it before us while we simulate interrupts.
3044 mtx_lock(&devq->send_mtx);
3045 dev->ccbq.dev_openings--;
3046 while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
3048 mtx_unlock(&devq->send_mtx);
3052 (*(sim->sim_poll))(sim);
3056 mtx_lock(&devq->send_mtx);
3058 dev->ccbq.dev_openings++;
3059 mtx_unlock(&devq->send_mtx);
3062 xpt_action(start_ccb);
3063 while(--timeout > 0) {
3066 (*(sim->sim_poll))(sim);
3070 if ((start_ccb->ccb_h.status & CAM_STATUS_MASK)
3077 * XXX Is it worth adding a sim_timeout entry
3078 * point so we can attempt recovery? If
3079 * this is only used for dumps, I don't think
3082 start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3085 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3088 mtx_lock(&dev->device_mtx);
3092 * Schedule a peripheral driver to receive a ccb when its
3093 * target device has space for more transactions.
3096 xpt_schedule(struct cam_periph *periph, u_int32_t new_priority)
3099 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
3100 cam_periph_assert(periph, MA_OWNED);
3101 if (new_priority < periph->scheduled_priority) {
3102 periph->scheduled_priority = new_priority;
3103 xpt_run_allocq(periph, 0);
3109 * Schedule a device to run on a given queue.
3110 * If the device was inserted as a new entry on the queue,
3111 * return 1 meaning the device queue should be run. If we
3112 * were already queued, implying someone else has already
3113 * started the queue, return 0 so the caller doesn't attempt
3117 xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
3118 u_int32_t new_priority)
3121 u_int32_t old_priority;
3123 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
3125 old_priority = pinfo->priority;
3128 * Are we already queued?
3130 if (pinfo->index != CAM_UNQUEUED_INDEX) {
3131 /* Simply reorder based on new priority */
3132 if (new_priority < old_priority) {
3133 camq_change_priority(queue, pinfo->index,
3135 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3136 ("changed priority to %d\n",
3142 /* New entry on the queue */
3143 if (new_priority < old_priority)
3144 pinfo->priority = new_priority;
3146 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3147 ("Inserting onto queue\n"));
3148 pinfo->generation = ++queue->generation;
3149 camq_insert(queue, pinfo);
3156 xpt_run_allocq_task(void *context, int pending)
3158 struct cam_periph *periph = context;
3160 cam_periph_lock(periph);
3161 periph->flags &= ~CAM_PERIPH_RUN_TASK;
3162 xpt_run_allocq(periph, 1);
3163 cam_periph_unlock(periph);
3164 cam_periph_release(periph);
3168 xpt_run_allocq(struct cam_periph *periph, int sleep)
3170 struct cam_ed *device;
3174 cam_periph_assert(periph, MA_OWNED);
3175 if (periph->periph_allocating)
3177 periph->periph_allocating = 1;
3178 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
3179 device = periph->path->device;
3182 while ((prio = min(periph->scheduled_priority,
3183 periph->immediate_priority)) != CAM_PRIORITY_NONE &&
3184 (periph->periph_allocated - (ccb != NULL ? 1 : 0) <
3185 device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
3188 (ccb = xpt_get_ccb_nowait(periph)) == NULL) {
3190 ccb = xpt_get_ccb(periph);
3193 if (periph->flags & CAM_PERIPH_RUN_TASK)
3195 cam_periph_doacquire(periph);
3196 periph->flags |= CAM_PERIPH_RUN_TASK;
3197 taskqueue_enqueue(xsoftc.xpt_taskq,
3198 &periph->periph_run_task);
3201 xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
3202 if (prio == periph->immediate_priority) {
3203 periph->immediate_priority = CAM_PRIORITY_NONE;
3204 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3205 ("waking cam_periph_getccb()\n"));
3206 SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
3208 wakeup(&periph->ccb_list);
3210 periph->scheduled_priority = CAM_PRIORITY_NONE;
3211 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3212 ("calling periph_start()\n"));
3213 periph->periph_start(periph, ccb);
3218 xpt_release_ccb(ccb);
3219 periph->periph_allocating = 0;
3223 xpt_run_devq(struct cam_devq *devq)
3225 char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
3228 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
3230 devq->send_queue.qfrozen_cnt++;
3231 while ((devq->send_queue.entries > 0)
3232 && (devq->send_openings > 0)
3233 && (devq->send_queue.qfrozen_cnt <= 1)) {
3234 struct cam_ed *device;
3235 union ccb *work_ccb;
3236 struct cam_sim *sim;
3238 device = (struct cam_ed *)camq_remove(&devq->send_queue,
3240 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3241 ("running device %p\n", device));
3243 work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
3244 if (work_ccb == NULL) {
3245 printf("device on run queue with no ccbs???\n");
3249 if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
3251 mtx_lock(&xsoftc.xpt_highpower_lock);
3252 if (xsoftc.num_highpower <= 0) {
3254 * We got a high power command, but we
3255 * don't have any available slots. Freeze
3256 * the device queue until we have a slot
3259 xpt_freeze_devq_device(device, 1);
3260 STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
3263 mtx_unlock(&xsoftc.xpt_highpower_lock);
3267 * Consume a high power slot while
3270 xsoftc.num_highpower--;
3272 mtx_unlock(&xsoftc.xpt_highpower_lock);
3274 cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
3275 cam_ccbq_send_ccb(&device->ccbq, work_ccb);
3276 devq->send_openings--;
3277 devq->send_active++;
3278 xpt_schedule_devq(devq, device);
3279 mtx_unlock(&devq->send_mtx);
3281 if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
3283 * The client wants to freeze the queue
3284 * after this CCB is sent.
3286 xpt_freeze_devq(work_ccb->ccb_h.path, 1);
3289 /* In Target mode, the peripheral driver knows best... */
3290 if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
3291 if ((device->inq_flags & SID_CmdQue) != 0
3292 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
3293 work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
3296 * Clear this in case of a retried CCB that
3297 * failed due to a rejected tag.
3299 work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
3302 switch (work_ccb->ccb_h.func_code) {
3304 CAM_DEBUG(work_ccb->ccb_h.path,
3305 CAM_DEBUG_CDB,("%s. CDB: %s\n",
3306 scsi_op_desc(work_ccb->csio.cdb_io.cdb_bytes[0],
3308 scsi_cdb_string(work_ccb->csio.cdb_io.cdb_bytes,
3309 cdb_str, sizeof(cdb_str))));
3312 CAM_DEBUG(work_ccb->ccb_h.path,
3313 CAM_DEBUG_CDB,("%s. ACB: %s\n",
3314 ata_op_string(&work_ccb->ataio.cmd),
3315 ata_cmd_string(&work_ccb->ataio.cmd,
3316 cdb_str, sizeof(cdb_str))));
3323 * Device queues can be shared among multiple SIM instances
3324 * that reside on different busses. Use the SIM from the
3325 * queued device, rather than the one from the calling bus.
3329 if (mtx && !mtx_owned(mtx))
3333 (*(sim->sim_action))(sim, work_ccb);
3336 mtx_lock(&devq->send_mtx);
3338 devq->send_queue.qfrozen_cnt--;
3342 * This function merges stuff from the slave ccb into the master ccb, while
3343 * keeping important fields in the master ccb constant.
3346 xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb)
3350 * Pull fields that are valid for peripheral drivers to set
3351 * into the master CCB along with the CCB "payload".
3353 master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count;
3354 master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code;
3355 master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout;
3356 master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags;
3357 bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1],
3358 sizeof(union ccb) - sizeof(struct ccb_hdr));
3362 xpt_setup_ccb_flags(struct ccb_hdr *ccb_h, struct cam_path *path,
3363 u_int32_t priority, u_int32_t flags)
3366 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
3367 ccb_h->pinfo.priority = priority;
3369 ccb_h->path_id = path->bus->path_id;
3371 ccb_h->target_id = path->target->target_id;
3373 ccb_h->target_id = CAM_TARGET_WILDCARD;
3375 ccb_h->target_lun = path->device->lun_id;
3376 ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
3378 ccb_h->target_lun = CAM_TARGET_WILDCARD;
3380 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
3381 ccb_h->flags = flags;
3386 xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority)
3388 xpt_setup_ccb_flags(ccb_h, path, priority, /*flags*/ 0);
3391 /* Path manipulation functions */
3393 xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
3394 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3396 struct cam_path *path;
3399 path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3402 status = CAM_RESRC_UNAVAIL;
3405 status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
3406 if (status != CAM_REQ_CMP) {
3407 free(path, M_CAMPATH);
3410 *new_path_ptr = path;
3415 xpt_create_path_unlocked(struct cam_path **new_path_ptr,
3416 struct cam_periph *periph, path_id_t path_id,
3417 target_id_t target_id, lun_id_t lun_id)
3420 return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
3425 xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
3426 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3429 struct cam_et *target;
3430 struct cam_ed *device;
3433 status = CAM_REQ_CMP; /* Completed without error */
3434 target = NULL; /* Wildcarded */
3435 device = NULL; /* Wildcarded */
3438 * We will potentially modify the EDT, so block interrupts
3439 * that may attempt to create cam paths.
3441 bus = xpt_find_bus(path_id);
3443 status = CAM_PATH_INVALID;
3446 mtx_lock(&bus->eb_mtx);
3447 target = xpt_find_target(bus, target_id);
3448 if (target == NULL) {
3450 struct cam_et *new_target;
3452 new_target = xpt_alloc_target(bus, target_id);
3453 if (new_target == NULL) {
3454 status = CAM_RESRC_UNAVAIL;
3456 target = new_target;
3460 if (target != NULL) {
3461 device = xpt_find_device(target, lun_id);
3462 if (device == NULL) {
3464 struct cam_ed *new_device;
3467 (*(bus->xport->alloc_device))(bus,
3470 if (new_device == NULL) {
3471 status = CAM_RESRC_UNAVAIL;
3473 device = new_device;
3477 mtx_unlock(&bus->eb_mtx);
3481 * Only touch the user's data if we are successful.
3483 if (status == CAM_REQ_CMP) {
3484 new_path->periph = perph;
3485 new_path->bus = bus;
3486 new_path->target = target;
3487 new_path->device = device;
3488 CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
3491 xpt_release_device(device);
3493 xpt_release_target(target);
3495 xpt_release_bus(bus);
3501 xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
3503 struct cam_path *new_path;
3505 new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3506 if (new_path == NULL)
3507 return(CAM_RESRC_UNAVAIL);
3508 xpt_copy_path(new_path, path);
3509 *new_path_ptr = new_path;
3510 return (CAM_REQ_CMP);
3514 xpt_copy_path(struct cam_path *new_path, struct cam_path *path)
3518 if (path->bus != NULL)
3519 xpt_acquire_bus(path->bus);
3520 if (path->target != NULL)
3521 xpt_acquire_target(path->target);
3522 if (path->device != NULL)
3523 xpt_acquire_device(path->device);
3527 xpt_release_path(struct cam_path *path)
3529 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
3530 if (path->device != NULL) {
3531 xpt_release_device(path->device);
3532 path->device = NULL;
3534 if (path->target != NULL) {
3535 xpt_release_target(path->target);
3536 path->target = NULL;
3538 if (path->bus != NULL) {
3539 xpt_release_bus(path->bus);
3545 xpt_free_path(struct cam_path *path)
3548 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
3549 xpt_release_path(path);
3550 free(path, M_CAMPATH);
3554 xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
3555 uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
3561 *bus_ref = path->bus->refcount;
3567 *periph_ref = path->periph->refcount;
3574 *target_ref = path->target->refcount;
3580 *device_ref = path->device->refcount;
3587 * Return -1 for failure, 0 for exact match, 1 for match with wildcards
3588 * in path1, 2 for match with wildcards in path2.
3591 xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
3595 if (path1->bus != path2->bus) {
3596 if (path1->bus->path_id == CAM_BUS_WILDCARD)
3598 else if (path2->bus->path_id == CAM_BUS_WILDCARD)
3603 if (path1->target != path2->target) {
3604 if (path1->target->target_id == CAM_TARGET_WILDCARD) {
3607 } else if (path2->target->target_id == CAM_TARGET_WILDCARD)
3612 if (path1->device != path2->device) {
3613 if (path1->device->lun_id == CAM_LUN_WILDCARD) {
3616 } else if (path2->device->lun_id == CAM_LUN_WILDCARD)
3625 xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
3629 if (path->bus != dev->target->bus) {
3630 if (path->bus->path_id == CAM_BUS_WILDCARD)
3632 else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
3637 if (path->target != dev->target) {
3638 if (path->target->target_id == CAM_TARGET_WILDCARD) {
3641 } else if (dev->target->target_id == CAM_TARGET_WILDCARD)
3646 if (path->device != dev) {
3647 if (path->device->lun_id == CAM_LUN_WILDCARD) {
3650 } else if (dev->lun_id == CAM_LUN_WILDCARD)
3659 xpt_print_path(struct cam_path *path)
3663 printf("(nopath): ");
3665 if (path->periph != NULL)
3666 printf("(%s%d:", path->periph->periph_name,
3667 path->periph->unit_number);
3669 printf("(noperiph:");
3671 if (path->bus != NULL)
3672 printf("%s%d:%d:", path->bus->sim->sim_name,
3673 path->bus->sim->unit_number,
3674 path->bus->sim->bus_id);
3678 if (path->target != NULL)
3679 printf("%d:", path->target->target_id);
3683 if (path->device != NULL)
3684 printf("%jx): ", (uintmax_t)path->device->lun_id);
3691 xpt_print_device(struct cam_ed *device)
3695 printf("(nopath): ");
3697 printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
3698 device->sim->unit_number,
3699 device->sim->bus_id,
3700 device->target->target_id,
3701 (uintmax_t)device->lun_id);
3706 xpt_print(struct cam_path *path, const char *fmt, ...)
3709 xpt_print_path(path);
3716 xpt_path_string(struct cam_path *path, char *str, size_t str_len)
3720 sbuf_new(&sb, str, str_len, 0);
3723 sbuf_printf(&sb, "(nopath): ");
3725 if (path->periph != NULL)
3726 sbuf_printf(&sb, "(%s%d:", path->periph->periph_name,
3727 path->periph->unit_number);
3729 sbuf_printf(&sb, "(noperiph:");
3731 if (path->bus != NULL)
3732 sbuf_printf(&sb, "%s%d:%d:", path->bus->sim->sim_name,
3733 path->bus->sim->unit_number,
3734 path->bus->sim->bus_id);
3736 sbuf_printf(&sb, "nobus:");
3738 if (path->target != NULL)
3739 sbuf_printf(&sb, "%d:", path->target->target_id);
3741 sbuf_printf(&sb, "X:");
3743 if (path->device != NULL)
3744 sbuf_printf(&sb, "%jx): ",
3745 (uintmax_t)path->device->lun_id);
3747 sbuf_printf(&sb, "X): ");
3751 return(sbuf_len(&sb));
3755 xpt_path_path_id(struct cam_path *path)
3757 return(path->bus->path_id);
3761 xpt_path_target_id(struct cam_path *path)
3763 if (path->target != NULL)
3764 return (path->target->target_id);
3766 return (CAM_TARGET_WILDCARD);
3770 xpt_path_lun_id(struct cam_path *path)
3772 if (path->device != NULL)
3773 return (path->device->lun_id);
3775 return (CAM_LUN_WILDCARD);
3779 xpt_path_sim(struct cam_path *path)
3782 return (path->bus->sim);
3786 xpt_path_periph(struct cam_path *path)
3789 return (path->periph);
3793 xpt_path_legacy_ata_id(struct cam_path *path)
3798 if ((strcmp(path->bus->sim->sim_name, "ata") != 0) &&
3799 strcmp(path->bus->sim->sim_name, "ahcich") != 0 &&
3800 strcmp(path->bus->sim->sim_name, "mvsch") != 0 &&
3801 strcmp(path->bus->sim->sim_name, "siisch") != 0)
3804 if (strcmp(path->bus->sim->sim_name, "ata") == 0 &&
3805 path->bus->sim->unit_number < 2) {
3806 bus_id = path->bus->sim->unit_number;
3810 TAILQ_FOREACH(bus, &xsoftc.xpt_busses, links) {
3811 if (bus == path->bus)
3813 if ((strcmp(bus->sim->sim_name, "ata") == 0 &&
3814 bus->sim->unit_number >= 2) ||
3815 strcmp(bus->sim->sim_name, "ahcich") == 0 ||
3816 strcmp(bus->sim->sim_name, "mvsch") == 0 ||
3817 strcmp(bus->sim->sim_name, "siisch") == 0)
3822 if (path->target != NULL) {
3823 if (path->target->target_id < 2)
3824 return (bus_id * 2 + path->target->target_id);
3828 return (bus_id * 2);
3832 * Release a CAM control block for the caller. Remit the cost of the structure
3833 * to the device referenced by the path. If the this device had no 'credits'
3834 * and peripheral drivers have registered async callbacks for this notification
3838 xpt_release_ccb(union ccb *free_ccb)
3840 struct cam_ed *device;
3841 struct cam_periph *periph;
3843 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
3844 xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
3845 device = free_ccb->ccb_h.path->device;
3846 periph = free_ccb->ccb_h.path->periph;
3848 xpt_free_ccb(free_ccb);
3849 periph->periph_allocated--;
3850 cam_ccbq_release_opening(&device->ccbq);
3851 xpt_run_allocq(periph, 0);
3854 /* Functions accessed by SIM drivers */
3856 static struct xpt_xport xport_default = {
3857 .alloc_device = xpt_alloc_device_default,
3858 .action = xpt_action_default,
3859 .async = xpt_dev_async_default,
3863 * A sim structure, listing the SIM entry points and instance
3864 * identification info is passed to xpt_bus_register to hook the SIM
3865 * into the CAM framework. xpt_bus_register creates a cam_eb entry
3866 * for this new bus and places it in the array of busses and assigns
3867 * it a path_id. The path_id may be influenced by "hard wiring"
3868 * information specified by the user. Once interrupt services are
3869 * available, the bus will be probed.
3872 xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus)
3874 struct cam_eb *new_bus;
3875 struct cam_eb *old_bus;
3876 struct ccb_pathinq cpi;
3877 struct cam_path *path;
3881 new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
3882 M_CAMXPT, M_NOWAIT|M_ZERO);
3883 if (new_bus == NULL) {
3884 /* Couldn't satisfy request */
3885 return (CAM_RESRC_UNAVAIL);
3888 mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
3889 TAILQ_INIT(&new_bus->et_entries);
3892 timevalclear(&new_bus->last_reset);
3894 new_bus->refcount = 1; /* Held until a bus_deregister event */
3895 new_bus->generation = 0;
3898 sim->path_id = new_bus->path_id =
3899 xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
3900 old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3901 while (old_bus != NULL
3902 && old_bus->path_id < new_bus->path_id)
3903 old_bus = TAILQ_NEXT(old_bus, links);
3904 if (old_bus != NULL)
3905 TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
3907 TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
3908 xsoftc.bus_generation++;
3912 * Set a default transport so that a PATH_INQ can be issued to
3913 * the SIM. This will then allow for probing and attaching of
3914 * a more appropriate transport.
3916 new_bus->xport = &xport_default;
3918 status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
3919 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3920 if (status != CAM_REQ_CMP) {
3921 xpt_release_bus(new_bus);
3922 free(path, M_CAMXPT);
3923 return (CAM_RESRC_UNAVAIL);
3926 xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NORMAL);
3927 cpi.ccb_h.func_code = XPT_PATH_INQ;
3928 xpt_action((union ccb *)&cpi);
3930 if (cpi.ccb_h.status == CAM_REQ_CMP) {
3931 switch (cpi.transport) {
3939 new_bus->xport = scsi_get_xport();
3943 new_bus->xport = ata_get_xport();
3946 new_bus->xport = &xport_default;
3951 /* Notify interested parties */
3952 if (sim->path_id != CAM_XPT_PATH_ID) {
3954 xpt_async(AC_PATH_REGISTERED, path, &cpi);
3955 if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
3956 union ccb *scan_ccb;
3958 /* Initiate bus rescan. */
3959 scan_ccb = xpt_alloc_ccb_nowait();
3960 if (scan_ccb != NULL) {
3961 scan_ccb->ccb_h.path = path;
3962 scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
3963 scan_ccb->crcn.flags = 0;
3964 xpt_rescan(scan_ccb);
3967 "Can't allocate CCB to scan bus\n");
3968 xpt_free_path(path);
3971 xpt_free_path(path);
3973 xpt_free_path(path);
3974 return (CAM_SUCCESS);
3978 xpt_bus_deregister(path_id_t pathid)
3980 struct cam_path bus_path;
3983 status = xpt_compile_path(&bus_path, NULL, pathid,
3984 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3985 if (status != CAM_REQ_CMP)
3988 xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
3989 xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
3991 /* Release the reference count held while registered. */
3992 xpt_release_bus(bus_path.bus);
3993 xpt_release_path(&bus_path);
3995 return (CAM_REQ_CMP);
3999 xptnextfreepathid(void)
4005 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4007 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4009 /* Find an unoccupied pathid */
4010 while (bus != NULL && bus->path_id <= pathid) {
4011 if (bus->path_id == pathid)
4013 bus = TAILQ_NEXT(bus, links);
4017 * Ensure that this pathid is not reserved for
4018 * a bus that may be registered in the future.
4020 if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
4022 /* Start the search over */
4029 xptpathid(const char *sim_name, int sim_unit, int sim_bus)
4036 pathid = CAM_XPT_PATH_ID;
4037 snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
4038 if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
4041 while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
4042 if (strcmp(dname, "scbus")) {
4043 /* Avoid a bit of foot shooting. */
4046 if (dunit < 0) /* unwired?! */
4048 if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
4049 if (sim_bus == val) {
4053 } else if (sim_bus == 0) {
4054 /* Unspecified matches bus 0 */
4058 printf("Ambiguous scbus configuration for %s%d "
4059 "bus %d, cannot wire down. The kernel "
4060 "config entry for scbus%d should "
4061 "specify a controller bus.\n"
4062 "Scbus will be assigned dynamically.\n",
4063 sim_name, sim_unit, sim_bus, dunit);
4068 if (pathid == CAM_XPT_PATH_ID)
4069 pathid = xptnextfreepathid();
4074 xpt_async_string(u_int32_t async_code)
4077 switch (async_code) {
4078 case AC_BUS_RESET: return ("AC_BUS_RESET");
4079 case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
4080 case AC_SCSI_AEN: return ("AC_SCSI_AEN");
4081 case AC_SENT_BDR: return ("AC_SENT_BDR");
4082 case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
4083 case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
4084 case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
4085 case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
4086 case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
4087 case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
4088 case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
4089 case AC_CONTRACT: return ("AC_CONTRACT");
4090 case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
4091 case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
4093 return ("AC_UNKNOWN");
4097 xpt_async_size(u_int32_t async_code)
4100 switch (async_code) {
4101 case AC_BUS_RESET: return (0);
4102 case AC_UNSOL_RESEL: return (0);
4103 case AC_SCSI_AEN: return (0);
4104 case AC_SENT_BDR: return (0);
4105 case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
4106 case AC_PATH_DEREGISTERED: return (0);
4107 case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
4108 case AC_LOST_DEVICE: return (0);
4109 case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
4110 case AC_INQ_CHANGED: return (0);
4111 case AC_GETDEV_CHANGED: return (0);
4112 case AC_CONTRACT: return (sizeof(struct ac_contract));
4113 case AC_ADVINFO_CHANGED: return (-1);
4114 case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
4120 xpt_async_process_dev(struct cam_ed *device, void *arg)
4122 union ccb *ccb = arg;
4123 struct cam_path *path = ccb->ccb_h.path;
4124 void *async_arg = ccb->casync.async_arg_ptr;
4125 u_int32_t async_code = ccb->casync.async_code;
4128 if (path->device != device
4129 && path->device->lun_id != CAM_LUN_WILDCARD
4130 && device->lun_id != CAM_LUN_WILDCARD)
4134 * The async callback could free the device.
4135 * If it is a broadcast async, it doesn't hold
4136 * device reference, so take our own reference.
4138 xpt_acquire_device(device);
4141 * If async for specific device is to be delivered to
4142 * the wildcard client, take the specific device lock.
4143 * XXX: We may need a way for client to specify it.
4145 if ((device->lun_id == CAM_LUN_WILDCARD &&
4146 path->device->lun_id != CAM_LUN_WILDCARD) ||
4147 (device->target->target_id == CAM_TARGET_WILDCARD &&
4148 path->target->target_id != CAM_TARGET_WILDCARD) ||
4149 (device->target->bus->path_id == CAM_BUS_WILDCARD &&
4150 path->target->bus->path_id != CAM_BUS_WILDCARD)) {
4151 mtx_unlock(&device->device_mtx);
4152 xpt_path_lock(path);
4157 (*(device->target->bus->xport->async))(async_code,
4158 device->target->bus, device->target, device, async_arg);
4159 xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
4162 xpt_path_unlock(path);
4163 mtx_lock(&device->device_mtx);
4165 xpt_release_device(device);
4170 xpt_async_process_tgt(struct cam_et *target, void *arg)
4172 union ccb *ccb = arg;
4173 struct cam_path *path = ccb->ccb_h.path;
4175 if (path->target != target
4176 && path->target->target_id != CAM_TARGET_WILDCARD
4177 && target->target_id != CAM_TARGET_WILDCARD)
4180 if (ccb->casync.async_code == AC_SENT_BDR) {
4181 /* Update our notion of when the last reset occurred */
4182 microtime(&target->last_reset);
4185 return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
4189 xpt_async_process(struct cam_periph *periph, union ccb *ccb)
4192 struct cam_path *path;
4194 u_int32_t async_code;
4196 path = ccb->ccb_h.path;
4197 async_code = ccb->casync.async_code;
4198 async_arg = ccb->casync.async_arg_ptr;
4199 CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
4200 ("xpt_async(%s)\n", xpt_async_string(async_code)));
4203 if (async_code == AC_BUS_RESET) {
4204 /* Update our notion of when the last reset occurred */
4205 microtime(&bus->last_reset);
4208 xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
4211 * If this wasn't a fully wildcarded async, tell all
4212 * clients that want all async events.
4214 if (bus != xpt_periph->path->bus) {
4215 xpt_path_lock(xpt_periph->path);
4216 xpt_async_process_dev(xpt_periph->path->device, ccb);
4217 xpt_path_unlock(xpt_periph->path);
4220 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4221 xpt_release_devq(path, 1, TRUE);
4223 xpt_release_simq(path->bus->sim, TRUE);
4224 if (ccb->casync.async_arg_size > 0)
4225 free(async_arg, M_CAMXPT);
4226 xpt_free_path(path);
4231 xpt_async_bcast(struct async_list *async_head,
4232 u_int32_t async_code,
4233 struct cam_path *path, void *async_arg)
4235 struct async_node *cur_entry;
4238 cur_entry = SLIST_FIRST(async_head);
4239 while (cur_entry != NULL) {
4240 struct async_node *next_entry;
4242 * Grab the next list entry before we call the current
4243 * entry's callback. This is because the callback function
4244 * can delete its async callback entry.
4246 next_entry = SLIST_NEXT(cur_entry, links);
4247 if ((cur_entry->event_enable & async_code) != 0) {
4248 mtx = cur_entry->event_lock ?
4249 path->device->sim->mtx : NULL;
4252 cur_entry->callback(cur_entry->callback_arg,
4258 cur_entry = next_entry;
4263 xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg)
4268 ccb = xpt_alloc_ccb_nowait();
4270 xpt_print(path, "Can't allocate CCB to send %s\n",
4271 xpt_async_string(async_code));
4275 if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) {
4276 xpt_print(path, "Can't allocate path to send %s\n",
4277 xpt_async_string(async_code));
4281 ccb->ccb_h.path->periph = NULL;
4282 ccb->ccb_h.func_code = XPT_ASYNC;
4283 ccb->ccb_h.cbfcnp = xpt_async_process;
4284 ccb->ccb_h.flags |= CAM_UNLOCKED;
4285 ccb->casync.async_code = async_code;
4286 ccb->casync.async_arg_size = 0;
4287 size = xpt_async_size(async_code);
4288 if (size > 0 && async_arg != NULL) {
4289 ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
4290 if (ccb->casync.async_arg_ptr == NULL) {
4291 xpt_print(path, "Can't allocate argument to send %s\n",
4292 xpt_async_string(async_code));
4293 xpt_free_path(ccb->ccb_h.path);
4297 memcpy(ccb->casync.async_arg_ptr, async_arg, size);
4298 ccb->casync.async_arg_size = size;
4299 } else if (size < 0) {
4300 ccb->casync.async_arg_ptr = async_arg;
4301 ccb->casync.async_arg_size = size;
4303 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4304 xpt_freeze_devq(path, 1);
4306 xpt_freeze_simq(path->bus->sim, 1);
4311 xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus,
4312 struct cam_et *target, struct cam_ed *device,
4317 * We only need to handle events for real devices.
4319 if (target->target_id == CAM_TARGET_WILDCARD
4320 || device->lun_id == CAM_LUN_WILDCARD)
4323 printf("%s called\n", __func__);
4327 xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
4329 struct cam_devq *devq;
4332 devq = dev->sim->devq;
4333 mtx_assert(&devq->send_mtx, MA_OWNED);
4334 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4335 ("xpt_freeze_devq_device(%d) %u->%u\n", count,
4336 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
4337 freeze = (dev->ccbq.queue.qfrozen_cnt += count);
4338 /* Remove frozen device from sendq. */
4339 if (device_is_queued(dev))
4340 camq_remove(&devq->send_queue, dev->devq_entry.index);
4345 xpt_freeze_devq(struct cam_path *path, u_int count)
4347 struct cam_ed *dev = path->device;
4348 struct cam_devq *devq;
4351 devq = dev->sim->devq;
4352 mtx_lock(&devq->send_mtx);
4353 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
4354 freeze = xpt_freeze_devq_device(dev, count);
4355 mtx_unlock(&devq->send_mtx);
4360 xpt_freeze_simq(struct cam_sim *sim, u_int count)
4362 struct cam_devq *devq;
4366 mtx_lock(&devq->send_mtx);
4367 freeze = (devq->send_queue.qfrozen_cnt += count);
4368 mtx_unlock(&devq->send_mtx);
4373 xpt_release_devq_timeout(void *arg)
4376 struct cam_devq *devq;
4378 dev = (struct cam_ed *)arg;
4379 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
4380 devq = dev->sim->devq;
4381 mtx_assert(&devq->send_mtx, MA_OWNED);
4382 if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
4387 xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
4390 struct cam_devq *devq;
4392 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
4395 devq = dev->sim->devq;
4396 mtx_lock(&devq->send_mtx);
4397 if (xpt_release_devq_device(dev, count, run_queue))
4398 xpt_run_devq(dev->sim->devq);
4399 mtx_unlock(&devq->send_mtx);
4403 xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
4406 mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
4407 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4408 ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
4409 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
4410 if (count > dev->ccbq.queue.qfrozen_cnt) {
4412 printf("xpt_release_devq(): requested %u > present %u\n",
4413 count, dev->ccbq.queue.qfrozen_cnt);
4415 count = dev->ccbq.queue.qfrozen_cnt;
4417 dev->ccbq.queue.qfrozen_cnt -= count;
4418 if (dev->ccbq.queue.qfrozen_cnt == 0) {
4420 * No longer need to wait for a successful
4421 * command completion.
4423 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
4425 * Remove any timeouts that might be scheduled
4426 * to release this queue.
4428 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
4429 callout_stop(&dev->callout);
4430 dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
4433 * Now that we are unfrozen schedule the
4434 * device so any pending transactions are
4437 xpt_schedule_devq(dev->sim->devq, dev);
4444 xpt_release_simq(struct cam_sim *sim, int run_queue)
4446 struct cam_devq *devq;
4449 mtx_lock(&devq->send_mtx);
4450 if (devq->send_queue.qfrozen_cnt <= 0) {
4452 printf("xpt_release_simq: requested 1 > present %u\n",
4453 devq->send_queue.qfrozen_cnt);
4456 devq->send_queue.qfrozen_cnt--;
4457 if (devq->send_queue.qfrozen_cnt == 0) {
4459 * If there is a timeout scheduled to release this
4460 * sim queue, remove it. The queue frozen count is
4463 if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){
4464 callout_stop(&sim->callout);
4465 sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING;
4469 * Now that we are unfrozen run the send queue.
4471 xpt_run_devq(sim->devq);
4474 mtx_unlock(&devq->send_mtx);
4478 * XXX Appears to be unused.
4481 xpt_release_simq_timeout(void *arg)
4483 struct cam_sim *sim;
4485 sim = (struct cam_sim *)arg;
4486 xpt_release_simq(sim, /* run_queue */ TRUE);
4490 xpt_done(union ccb *done_ccb)
4492 struct cam_doneq *queue;
4495 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done\n"));
4496 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4499 hash = (done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
4500 done_ccb->ccb_h.target_lun) % cam_num_doneqs;
4501 queue = &cam_doneqs[hash];
4502 mtx_lock(&queue->cam_doneq_mtx);
4503 run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
4504 STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
4505 done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
4506 mtx_unlock(&queue->cam_doneq_mtx);
4508 wakeup(&queue->cam_doneq);
4512 xpt_done_direct(union ccb *done_ccb)
4515 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done_direct\n"));
4516 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4519 xpt_done_process(&done_ccb->ccb_h);
4527 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4532 xpt_alloc_ccb_nowait()
4536 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4541 xpt_free_ccb(union ccb *free_ccb)
4543 free(free_ccb, M_CAMCCB);
4548 /* Private XPT functions */
4551 * Get a CAM control block for the caller. Charge the structure to the device
4552 * referenced by the path. If we don't have sufficient resources to allocate
4553 * more ccbs, we return NULL.
4556 xpt_get_ccb_nowait(struct cam_periph *periph)
4560 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4561 if (new_ccb == NULL)
4563 periph->periph_allocated++;
4564 cam_ccbq_take_opening(&periph->path->device->ccbq);
4569 xpt_get_ccb(struct cam_periph *periph)
4573 cam_periph_unlock(periph);
4574 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4575 cam_periph_lock(periph);
4576 periph->periph_allocated++;
4577 cam_ccbq_take_opening(&periph->path->device->ccbq);
4582 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
4584 struct ccb_hdr *ccb_h;
4586 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
4587 cam_periph_assert(periph, MA_OWNED);
4588 while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
4589 ccb_h->pinfo.priority != priority) {
4590 if (priority < periph->immediate_priority) {
4591 periph->immediate_priority = priority;
4592 xpt_run_allocq(periph, 0);
4594 cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
4597 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
4598 return ((union ccb *)ccb_h);
4602 xpt_acquire_bus(struct cam_eb *bus)
4611 xpt_release_bus(struct cam_eb *bus)
4615 KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
4616 if (--bus->refcount > 0) {
4620 TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
4621 xsoftc.bus_generation++;
4623 KASSERT(TAILQ_EMPTY(&bus->et_entries),
4624 ("destroying bus, but target list is not empty"));
4625 cam_sim_release(bus->sim);
4626 mtx_destroy(&bus->eb_mtx);
4627 free(bus, M_CAMXPT);
4630 static struct cam_et *
4631 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
4633 struct cam_et *cur_target, *target;
4635 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4636 mtx_assert(&bus->eb_mtx, MA_OWNED);
4637 target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
4642 TAILQ_INIT(&target->ed_entries);
4644 target->target_id = target_id;
4645 target->refcount = 1;
4646 target->generation = 0;
4647 target->luns = NULL;
4648 mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
4649 timevalclear(&target->last_reset);
4651 * Hold a reference to our parent bus so it
4652 * will not go away before we do.
4656 /* Insertion sort into our bus's target list */
4657 cur_target = TAILQ_FIRST(&bus->et_entries);
4658 while (cur_target != NULL && cur_target->target_id < target_id)
4659 cur_target = TAILQ_NEXT(cur_target, links);
4660 if (cur_target != NULL) {
4661 TAILQ_INSERT_BEFORE(cur_target, target, links);
4663 TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
4670 xpt_acquire_target(struct cam_et *target)
4672 struct cam_eb *bus = target->bus;
4674 mtx_lock(&bus->eb_mtx);
4676 mtx_unlock(&bus->eb_mtx);
4680 xpt_release_target(struct cam_et *target)
4682 struct cam_eb *bus = target->bus;
4684 mtx_lock(&bus->eb_mtx);
4685 if (--target->refcount > 0) {
4686 mtx_unlock(&bus->eb_mtx);
4689 TAILQ_REMOVE(&bus->et_entries, target, links);
4691 mtx_unlock(&bus->eb_mtx);
4692 KASSERT(TAILQ_EMPTY(&target->ed_entries),
4693 ("destroying target, but device list is not empty"));
4694 xpt_release_bus(bus);
4695 mtx_destroy(&target->luns_mtx);
4697 free(target->luns, M_CAMXPT);
4698 free(target, M_CAMXPT);
4701 static struct cam_ed *
4702 xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
4705 struct cam_ed *device;
4707 device = xpt_alloc_device(bus, target, lun_id);
4711 device->mintags = 1;
4712 device->maxtags = 1;
4717 xpt_destroy_device(void *context, int pending)
4719 struct cam_ed *device = context;
4721 mtx_lock(&device->device_mtx);
4722 mtx_destroy(&device->device_mtx);
4723 free(device, M_CAMDEV);
4727 xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
4729 struct cam_ed *cur_device, *device;
4730 struct cam_devq *devq;
4733 mtx_assert(&bus->eb_mtx, MA_OWNED);
4734 /* Make space for us in the device queue on our bus */
4735 devq = bus->sim->devq;
4736 mtx_lock(&devq->send_mtx);
4737 status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
4738 mtx_unlock(&devq->send_mtx);
4739 if (status != CAM_REQ_CMP)
4742 device = (struct cam_ed *)malloc(sizeof(*device),
4743 M_CAMDEV, M_NOWAIT|M_ZERO);
4747 cam_init_pinfo(&device->devq_entry);
4748 device->target = target;
4749 device->lun_id = lun_id;
4750 device->sim = bus->sim;
4751 if (cam_ccbq_init(&device->ccbq,
4752 bus->sim->max_dev_openings) != 0) {
4753 free(device, M_CAMDEV);
4756 SLIST_INIT(&device->asyncs);
4757 SLIST_INIT(&device->periphs);
4758 device->generation = 0;
4759 device->flags = CAM_DEV_UNCONFIGURED;
4760 device->tag_delay_count = 0;
4761 device->tag_saved_openings = 0;
4762 device->refcount = 1;
4763 mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
4764 callout_init_mtx(&device->callout, &devq->send_mtx, 0);
4765 TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
4767 * Hold a reference to our parent bus so it
4768 * will not go away before we do.
4772 cur_device = TAILQ_FIRST(&target->ed_entries);
4773 while (cur_device != NULL && cur_device->lun_id < lun_id)
4774 cur_device = TAILQ_NEXT(cur_device, links);
4775 if (cur_device != NULL)
4776 TAILQ_INSERT_BEFORE(cur_device, device, links);
4778 TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
4779 target->generation++;
4784 xpt_acquire_device(struct cam_ed *device)
4786 struct cam_eb *bus = device->target->bus;
4788 mtx_lock(&bus->eb_mtx);
4790 mtx_unlock(&bus->eb_mtx);
4794 xpt_release_device(struct cam_ed *device)
4796 struct cam_eb *bus = device->target->bus;
4797 struct cam_devq *devq;
4799 mtx_lock(&bus->eb_mtx);
4800 if (--device->refcount > 0) {
4801 mtx_unlock(&bus->eb_mtx);
4805 TAILQ_REMOVE(&device->target->ed_entries, device,links);
4806 device->target->generation++;
4807 mtx_unlock(&bus->eb_mtx);
4809 /* Release our slot in the devq */
4810 devq = bus->sim->devq;
4811 mtx_lock(&devq->send_mtx);
4812 cam_devq_resize(devq, devq->send_queue.array_size - 1);
4813 mtx_unlock(&devq->send_mtx);
4815 KASSERT(SLIST_EMPTY(&device->periphs),
4816 ("destroying device, but periphs list is not empty"));
4817 KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
4818 ("destroying device while still queued for ccbs"));
4820 if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
4821 callout_stop(&device->callout);
4823 xpt_release_target(device->target);
4825 cam_ccbq_fini(&device->ccbq);
4827 * Free allocated memory. free(9) does nothing if the
4828 * supplied pointer is NULL, so it is safe to call without
4831 free(device->supported_vpds, M_CAMXPT);
4832 free(device->device_id, M_CAMXPT);
4833 free(device->ext_inq, M_CAMXPT);
4834 free(device->physpath, M_CAMXPT);
4835 free(device->rcap_buf, M_CAMXPT);
4836 free(device->serial_num, M_CAMXPT);
4837 taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
4841 xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
4847 mtx_lock(&dev->sim->devq->send_mtx);
4848 result = cam_ccbq_resize(&dev->ccbq, newopenings);
4849 mtx_unlock(&dev->sim->devq->send_mtx);
4850 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
4851 || (dev->inq_flags & SID_CmdQue) != 0)
4852 dev->tag_saved_openings = newopenings;
4856 static struct cam_eb *
4857 xpt_find_bus(path_id_t path_id)
4862 for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4864 bus = TAILQ_NEXT(bus, links)) {
4865 if (bus->path_id == path_id) {
4874 static struct cam_et *
4875 xpt_find_target(struct cam_eb *bus, target_id_t target_id)
4877 struct cam_et *target;
4879 mtx_assert(&bus->eb_mtx, MA_OWNED);
4880 for (target = TAILQ_FIRST(&bus->et_entries);
4882 target = TAILQ_NEXT(target, links)) {
4883 if (target->target_id == target_id) {
4891 static struct cam_ed *
4892 xpt_find_device(struct cam_et *target, lun_id_t lun_id)
4894 struct cam_ed *device;
4896 mtx_assert(&target->bus->eb_mtx, MA_OWNED);
4897 for (device = TAILQ_FIRST(&target->ed_entries);
4899 device = TAILQ_NEXT(device, links)) {
4900 if (device->lun_id == lun_id) {
4909 xpt_start_tags(struct cam_path *path)
4911 struct ccb_relsim crs;
4912 struct cam_ed *device;
4913 struct cam_sim *sim;
4916 device = path->device;
4917 sim = path->bus->sim;
4918 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4919 xpt_freeze_devq(path, /*count*/1);
4920 device->inq_flags |= SID_CmdQue;
4921 if (device->tag_saved_openings != 0)
4922 newopenings = device->tag_saved_openings;
4924 newopenings = min(device->maxtags,
4925 sim->max_tagged_dev_openings);
4926 xpt_dev_ccbq_resize(path, newopenings);
4927 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4928 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4929 crs.ccb_h.func_code = XPT_REL_SIMQ;
4930 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4932 = crs.release_timeout
4935 xpt_action((union ccb *)&crs);
4939 xpt_stop_tags(struct cam_path *path)
4941 struct ccb_relsim crs;
4942 struct cam_ed *device;
4943 struct cam_sim *sim;
4945 device = path->device;
4946 sim = path->bus->sim;
4947 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4948 device->tag_delay_count = 0;
4949 xpt_freeze_devq(path, /*count*/1);
4950 device->inq_flags &= ~SID_CmdQue;
4951 xpt_dev_ccbq_resize(path, sim->max_dev_openings);
4952 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4953 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4954 crs.ccb_h.func_code = XPT_REL_SIMQ;
4955 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4957 = crs.release_timeout
4960 xpt_action((union ccb *)&crs);
4964 xpt_boot_delay(void *arg)
4971 xpt_config(void *arg)
4974 * Now that interrupts are enabled, go find our devices
4976 if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
4977 printf("xpt_config: failed to create taskqueue thread.\n");
4979 /* Setup debugging path */
4980 if (cam_dflags != CAM_DEBUG_NONE) {
4981 if (xpt_create_path(&cam_dpath, NULL,
4982 CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
4983 CAM_DEBUG_LUN) != CAM_REQ_CMP) {
4984 printf("xpt_config: xpt_create_path() failed for debug"
4985 " target %d:%d:%d, debugging disabled\n",
4986 CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
4987 cam_dflags = CAM_DEBUG_NONE;
4992 periphdriver_init(1);
4994 callout_init(&xsoftc.boot_callout, 1);
4995 callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay, 0,
4996 xpt_boot_delay, NULL, 0);
4997 /* Fire up rescan thread. */
4998 if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
4999 "cam", "scanner")) {
5000 printf("xpt_config: failed to create rescan thread.\n");
5008 xsoftc.buses_to_config++;
5013 xpt_release_boot(void)
5016 xsoftc.buses_to_config--;
5017 if (xsoftc.buses_to_config == 0 && xsoftc.buses_config_done == 0) {
5018 struct xpt_task *task;
5020 xsoftc.buses_config_done = 1;
5022 /* Call manually because we don't have any busses */
5023 task = malloc(sizeof(struct xpt_task), M_CAMXPT, M_NOWAIT);
5025 TASK_INIT(&task->task, 0, xpt_finishconfig_task, task);
5026 taskqueue_enqueue(taskqueue_thread, &task->task);
5033 * If the given device only has one peripheral attached to it, and if that
5034 * peripheral is the passthrough driver, announce it. This insures that the
5035 * user sees some sort of announcement for every peripheral in their system.
5038 xptpassannouncefunc(struct cam_ed *device, void *arg)
5040 struct cam_periph *periph;
5043 for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
5044 periph = SLIST_NEXT(periph, periph_links), i++);
5046 periph = SLIST_FIRST(&device->periphs);
5048 && (strncmp(periph->periph_name, "pass", 4) == 0))
5049 xpt_announce_periph(periph, NULL);
5055 xpt_finishconfig_task(void *context, int pending)
5058 periphdriver_init(2);
5060 * Check for devices with no "standard" peripheral driver
5061 * attached. For any devices like that, announce the
5062 * passthrough driver so the user will see something.
5065 xpt_for_all_devices(xptpassannouncefunc, NULL);
5067 /* Release our hook so that the boot can continue. */
5068 config_intrhook_disestablish(xsoftc.xpt_config_hook);
5069 free(xsoftc.xpt_config_hook, M_CAMXPT);
5070 xsoftc.xpt_config_hook = NULL;
5072 free(context, M_CAMXPT);
5076 xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
5077 struct cam_path *path)
5079 struct ccb_setasync csa;
5084 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
5085 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
5086 if (status != CAM_REQ_CMP)
5088 xpt_path_lock(path);
5092 xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
5093 csa.ccb_h.func_code = XPT_SASYNC_CB;
5094 csa.event_enable = event;
5095 csa.callback = cbfunc;
5096 csa.callback_arg = cbarg;
5097 xpt_action((union ccb *)&csa);
5098 status = csa.ccb_h.status;
5101 xpt_path_unlock(path);
5102 xpt_free_path(path);
5105 if ((status == CAM_REQ_CMP) &&
5106 (csa.event_enable & AC_FOUND_DEVICE)) {
5108 * Get this peripheral up to date with all
5109 * the currently existing devices.
5111 xpt_for_all_devices(xptsetasyncfunc, &csa);
5113 if ((status == CAM_REQ_CMP) &&
5114 (csa.event_enable & AC_PATH_REGISTERED)) {
5116 * Get this peripheral up to date with all
5117 * the currently existing busses.
5119 xpt_for_all_busses(xptsetasyncbusfunc, &csa);
5126 xptaction(struct cam_sim *sim, union ccb *work_ccb)
5128 CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
5130 switch (work_ccb->ccb_h.func_code) {
5131 /* Common cases first */
5132 case XPT_PATH_INQ: /* Path routing inquiry */
5134 struct ccb_pathinq *cpi;
5136 cpi = &work_ccb->cpi;
5137 cpi->version_num = 1; /* XXX??? */
5138 cpi->hba_inquiry = 0;
5139 cpi->target_sprt = 0;
5141 cpi->hba_eng_cnt = 0;
5142 cpi->max_target = 0;
5144 cpi->initiator_id = 0;
5145 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
5146 strlcpy(cpi->hba_vid, "", HBA_IDLEN);
5147 strlcpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
5148 cpi->unit_number = sim->unit_number;
5149 cpi->bus_id = sim->bus_id;
5150 cpi->base_transfer_speed = 0;
5151 cpi->protocol = PROTO_UNSPECIFIED;
5152 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
5153 cpi->transport = XPORT_UNSPECIFIED;
5154 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
5155 cpi->ccb_h.status = CAM_REQ_CMP;
5160 work_ccb->ccb_h.status = CAM_REQ_INVALID;
5167 * The xpt as a "controller" has no interrupt sources, so polling
5171 xptpoll(struct cam_sim *sim)
5176 xpt_lock_buses(void)
5178 mtx_lock(&xsoftc.xpt_topo_lock);
5182 xpt_unlock_buses(void)
5184 mtx_unlock(&xsoftc.xpt_topo_lock);
5188 xpt_path_mtx(struct cam_path *path)
5191 return (&path->device->device_mtx);
5195 xpt_done_process(struct ccb_hdr *ccb_h)
5197 struct cam_sim *sim;
5198 struct cam_devq *devq;
5199 struct mtx *mtx = NULL;
5201 if (ccb_h->flags & CAM_HIGH_POWER) {
5202 struct highpowerlist *hphead;
5203 struct cam_ed *device;
5205 mtx_lock(&xsoftc.xpt_highpower_lock);
5206 hphead = &xsoftc.highpowerq;
5208 device = STAILQ_FIRST(hphead);
5211 * Increment the count since this command is done.
5213 xsoftc.num_highpower++;
5216 * Any high powered commands queued up?
5218 if (device != NULL) {
5220 STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
5221 mtx_unlock(&xsoftc.xpt_highpower_lock);
5223 mtx_lock(&device->sim->devq->send_mtx);
5224 xpt_release_devq_device(device,
5225 /*count*/1, /*runqueue*/TRUE);
5226 mtx_unlock(&device->sim->devq->send_mtx);
5228 mtx_unlock(&xsoftc.xpt_highpower_lock);
5231 sim = ccb_h->path->bus->sim;
5233 if (ccb_h->status & CAM_RELEASE_SIMQ) {
5234 xpt_release_simq(sim, /*run_queue*/FALSE);
5235 ccb_h->status &= ~CAM_RELEASE_SIMQ;
5238 if ((ccb_h->flags & CAM_DEV_QFRZDIS)
5239 && (ccb_h->status & CAM_DEV_QFRZN)) {
5240 xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
5241 ccb_h->status &= ~CAM_DEV_QFRZN;
5245 if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
5246 struct cam_ed *dev = ccb_h->path->device;
5248 mtx_lock(&devq->send_mtx);
5249 devq->send_active--;
5250 devq->send_openings++;
5251 cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
5253 if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
5254 && (dev->ccbq.dev_active == 0))) {
5255 dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
5256 xpt_release_devq_device(dev, /*count*/1,
5257 /*run_queue*/FALSE);
5260 if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
5261 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
5262 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
5263 xpt_release_devq_device(dev, /*count*/1,
5264 /*run_queue*/FALSE);
5267 if (!device_is_queued(dev))
5268 (void)xpt_schedule_devq(devq, dev);
5270 mtx_unlock(&devq->send_mtx);
5272 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
5273 mtx = xpt_path_mtx(ccb_h->path);
5276 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5277 && (--dev->tag_delay_count == 0))
5278 xpt_start_tags(ccb_h->path);
5282 if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
5284 mtx = xpt_path_mtx(ccb_h->path);
5294 /* Call the peripheral driver's callback */
5295 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
5296 (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
5302 xpt_done_td(void *arg)
5304 struct cam_doneq *queue = arg;
5305 struct ccb_hdr *ccb_h;
5306 STAILQ_HEAD(, ccb_hdr) doneq;
5308 STAILQ_INIT(&doneq);
5309 mtx_lock(&queue->cam_doneq_mtx);
5311 while (STAILQ_EMPTY(&queue->cam_doneq)) {
5312 queue->cam_doneq_sleep = 1;
5313 msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5315 queue->cam_doneq_sleep = 0;
5317 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5318 mtx_unlock(&queue->cam_doneq_mtx);
5320 THREAD_NO_SLEEPING();
5321 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5322 STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5323 xpt_done_process(ccb_h);
5325 THREAD_SLEEPING_OK();
5327 mtx_lock(&queue->cam_doneq_mtx);
5332 camisr_runqueue(void)
5334 struct ccb_hdr *ccb_h;
5335 struct cam_doneq *queue;
5338 /* Process global queues. */
5339 for (i = 0; i < cam_num_doneqs; i++) {
5340 queue = &cam_doneqs[i];
5341 mtx_lock(&queue->cam_doneq_mtx);
5342 while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
5343 STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
5344 mtx_unlock(&queue->cam_doneq_mtx);
5345 xpt_done_process(ccb_h);
5346 mtx_lock(&queue->cam_doneq_mtx);
5348 mtx_unlock(&queue->cam_doneq_mtx);