sys/cam/cam_xpt.c

   1 /*-
   2  * Implementation of the Common Access Method Transport (XPT) layer.
   3  *
   4  * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
   5  * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
   6  * All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions, and the following disclaimer,
  13  *    without modification, immediately at the beginning of the file.
  14  * 2. The name of the author may not be used to endorse or promote products
  15  *    derived from this software without specific prior written permission.
  16  *
  17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  20  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
  21  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  27  * SUCH DAMAGE.
  28  */
  29
  30 #include <sys/cdefs.h>
  31 __FBSDID("$FreeBSD$");
  32
  33 #include <sys/param.h>
  34 #include <sys/bus.h>
  35 #include <sys/systm.h>
  36 #include <sys/types.h>
  37 #include <sys/malloc.h>
  38 #include <sys/kernel.h>
  39 #include <sys/time.h>
  40 #include <sys/conf.h>
  41 #include <sys/fcntl.h>
  42 #include <sys/interrupt.h>
  43 #include <sys/proc.h>
  44 #include <sys/sbuf.h>
  45 #include <sys/smp.h>
  46 #include <sys/taskqueue.h>
  47
  48 #include <sys/lock.h>
  49 #include <sys/mutex.h>
  50 #include <sys/sysctl.h>
  51 #include <sys/kthread.h>
  52
  53 #include <cam/cam.h>
  54 #include <cam/cam_ccb.h>
  55 #include <cam/cam_periph.h>
  56 #include <cam/cam_queue.h>
  57 #include <cam/cam_sim.h>
  58 #include <cam/cam_xpt.h>
  59 #include <cam/cam_xpt_sim.h>
  60 #include <cam/cam_xpt_periph.h>
  61 #include <cam/cam_xpt_internal.h>
  62 #include <cam/cam_debug.h>
  63 #include <cam/cam_compat.h>
  64
  65 #include <cam/scsi/scsi_all.h>
  66 #include <cam/scsi/scsi_message.h>
  67 #include <cam/scsi/scsi_pass.h>
  68
  69 #include <machine/md_var.h>     /* geometry translation */
  70 #include <machine/stdarg.h>     /* for xpt_print below */
  71
  72 #include "opt_cam.h"
  73
  74 /*
  75  * This is the maximum number of high powered commands (e.g. start unit)
  76  * that can be outstanding at a particular time.
  77  */
  78 #ifndef CAM_MAX_HIGHPOWER
  79 #define CAM_MAX_HIGHPOWER  4
  80 #endif
  81
  82 /* Datastructures internal to the xpt layer */
  83 MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
  84 MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
  85 MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
  86 MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
  87
  88 /* Object for defering XPT actions to a taskqueue */
  89 struct xpt_task {
  90         struct task     task;
  91         void            *data1;
  92         uintptr_t       data2;
  93 };
  94
  95 struct xpt_softc {
  96         /* number of high powered commands that can go through right now */
  97         struct mtx              xpt_highpower_lock;
  98         STAILQ_HEAD(highpowerlist, cam_ed)      highpowerq;
  99         int                     num_highpower;
 100
 101         /* queue for handling async rescan requests. */
 102         TAILQ_HEAD(, ccb_hdr) ccb_scanq;
 103         int buses_to_config;
 104         int buses_config_done;
 105
 106         /* Registered busses */
 107         TAILQ_HEAD(,cam_eb)     xpt_busses;
 108         u_int                   bus_generation;
 109
 110         struct intr_config_hook *xpt_config_hook;
 111
 112         int                     boot_delay;
 113         struct callout          boot_callout;
 114
 115         struct mtx              xpt_topo_lock;
 116         struct mtx              xpt_lock;
 117         struct taskqueue        *xpt_taskq;
 118 };
 119
 120 typedef enum {
 121         DM_RET_COPY             = 0x01,
 122         DM_RET_FLAG_MASK        = 0x0f,
 123         DM_RET_NONE             = 0x00,
 124         DM_RET_STOP             = 0x10,
 125         DM_RET_DESCEND          = 0x20,
 126         DM_RET_ERROR            = 0x30,
 127         DM_RET_ACTION_MASK      = 0xf0
 128 } dev_match_ret;
 129
 130 typedef enum {
 131         XPT_DEPTH_BUS,
 132         XPT_DEPTH_TARGET,
 133         XPT_DEPTH_DEVICE,
 134         XPT_DEPTH_PERIPH
 135 } xpt_traverse_depth;
 136
 137 struct xpt_traverse_config {
 138         xpt_traverse_depth      depth;
 139         void                    *tr_func;
 140         void                    *tr_arg;
 141 };
 142
 143 typedef int     xpt_busfunc_t (struct cam_eb *bus, void *arg);
 144 typedef int     xpt_targetfunc_t (struct cam_et *target, void *arg);
 145 typedef int     xpt_devicefunc_t (struct cam_ed *device, void *arg);
 146 typedef int     xpt_periphfunc_t (struct cam_periph *periph, void *arg);
 147 typedef int     xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
 148
 149 /* Transport layer configuration information */
 150 static struct xpt_softc xsoftc;
 151
 152 TUNABLE_INT("kern.cam.boot_delay", &xsoftc.boot_delay);
 153 SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
 154            &xsoftc.boot_delay, 0, "Bus registration wait time");
 155
 156 struct cam_doneq {
 157         struct mtx_padalign     cam_doneq_mtx;
 158         STAILQ_HEAD(, ccb_hdr)  cam_doneq;
 159         int                     cam_doneq_sleep;
 160 };
 161
 162 static struct cam_doneq cam_doneqs[MAXCPU];
 163 static int cam_num_doneqs;
 164 static struct proc *cam_proc;
 165
 166 TUNABLE_INT("kern.cam.num_doneqs", &cam_num_doneqs);
 167 SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
 168            &cam_num_doneqs, 0, "Number of completion queues/threads");
 169
 170 struct cam_periph *xpt_periph;
 171
 172 static periph_init_t xpt_periph_init;
 173
 174 static struct periph_driver xpt_driver =
 175 {
 176         xpt_periph_init, "xpt",
 177         TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
 178         CAM_PERIPH_DRV_EARLY
 179 };
 180
 181 PERIPHDRIVER_DECLARE(xpt, xpt_driver);
 182
 183 static d_open_t xptopen;
 184 static d_close_t xptclose;
 185 static d_ioctl_t xptioctl;
 186 static d_ioctl_t xptdoioctl;
 187
 188 static struct cdevsw xpt_cdevsw = {
 189         .d_version =    D_VERSION,
 190         .d_flags =      0,
 191         .d_open =       xptopen,
 192         .d_close =      xptclose,
 193         .d_ioctl =      xptioctl,
 194         .d_name =       "xpt",
 195 };
 196
 197 /* Storage for debugging datastructures */
 198 struct cam_path *cam_dpath;
 199 u_int32_t cam_dflags = CAM_DEBUG_FLAGS;
 200 TUNABLE_INT("kern.cam.dflags", &cam_dflags);
 201 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RW,
 202         &cam_dflags, 0, "Enabled debug flags");
 203 u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
 204 TUNABLE_INT("kern.cam.debug_delay", &cam_debug_delay);
 205 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RW,
 206         &cam_debug_delay, 0, "Delay in us after each debug message");
 207
 208 /* Our boot-time initialization hook */
 209 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
 210
 211 static moduledata_t cam_moduledata = {
 212         "cam",
 213         cam_module_event_handler,
 214         NULL
 215 };
 216
 217 static int      xpt_init(void *);
 218
 219 DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
 220 MODULE_VERSION(cam, 1);
 221
 222
 223 static void             xpt_async_bcast(struct async_list *async_head,
 224                                         u_int32_t async_code,
 225                                         struct cam_path *path,
 226                                         void *async_arg);
 227 static path_id_t xptnextfreepathid(void);
 228 static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
 229 static union ccb *xpt_get_ccb(struct cam_periph *periph);
 230 static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
 231 static void      xpt_run_allocq(struct cam_periph *periph, int sleep);
 232 static void      xpt_run_allocq_task(void *context, int pending);
 233 static void      xpt_run_devq(struct cam_devq *devq);
 234 static timeout_t xpt_release_devq_timeout;
 235 static void      xpt_release_simq_timeout(void *arg) __unused;
 236 static void      xpt_acquire_bus(struct cam_eb *bus);
 237 static void      xpt_release_bus(struct cam_eb *bus);
 238 static uint32_t  xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
 239 static int       xpt_release_devq_device(struct cam_ed *dev, u_int count,
 240                     int run_queue);
 241 static struct cam_et*
 242                  xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
 243 static void      xpt_acquire_target(struct cam_et *target);
 244 static void      xpt_release_target(struct cam_et *target);
 245 static struct cam_eb*
 246                  xpt_find_bus(path_id_t path_id);
 247 static struct cam_et*
 248                  xpt_find_target(struct cam_eb *bus, target_id_t target_id);
 249 static struct cam_ed*
 250                  xpt_find_device(struct cam_et *target, lun_id_t lun_id);
 251 static void      xpt_config(void *arg);
 252 static int       xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
 253                                  u_int32_t new_priority);
 254 static xpt_devicefunc_t xptpassannouncefunc;
 255 static void      xptaction(struct cam_sim *sim, union ccb *work_ccb);
 256 static void      xptpoll(struct cam_sim *sim);
 257 static void      camisr_runqueue(void);
 258 static void      xpt_done_process(struct ccb_hdr *ccb_h);
 259 static void      xpt_done_td(void *);
 260 static dev_match_ret    xptbusmatch(struct dev_match_pattern *patterns,
 261                                     u_int num_patterns, struct cam_eb *bus);
 262 static dev_match_ret    xptdevicematch(struct dev_match_pattern *patterns,
 263                                        u_int num_patterns,
 264                                        struct cam_ed *device);
 265 static dev_match_ret    xptperiphmatch(struct dev_match_pattern *patterns,
 266                                        u_int num_patterns,
 267                                        struct cam_periph *periph);
 268 static xpt_busfunc_t    xptedtbusfunc;
 269 static xpt_targetfunc_t xptedttargetfunc;
 270 static xpt_devicefunc_t xptedtdevicefunc;
 271 static xpt_periphfunc_t xptedtperiphfunc;
 272 static xpt_pdrvfunc_t   xptplistpdrvfunc;
 273 static xpt_periphfunc_t xptplistperiphfunc;
 274 static int              xptedtmatch(struct ccb_dev_match *cdm);
 275 static int              xptperiphlistmatch(struct ccb_dev_match *cdm);
 276 static int              xptbustraverse(struct cam_eb *start_bus,
 277                                        xpt_busfunc_t *tr_func, void *arg);
 278 static int              xpttargettraverse(struct cam_eb *bus,
 279                                           struct cam_et *start_target,
 280                                           xpt_targetfunc_t *tr_func, void *arg);
 281 static int              xptdevicetraverse(struct cam_et *target,
 282                                           struct cam_ed *start_device,
 283                                           xpt_devicefunc_t *tr_func, void *arg);
 284 static int              xptperiphtraverse(struct cam_ed *device,
 285                                           struct cam_periph *start_periph,
 286                                           xpt_periphfunc_t *tr_func, void *arg);
 287 static int              xptpdrvtraverse(struct periph_driver **start_pdrv,
 288                                         xpt_pdrvfunc_t *tr_func, void *arg);
 289 static int              xptpdperiphtraverse(struct periph_driver **pdrv,
 290                                             struct cam_periph *start_periph,
 291                                             xpt_periphfunc_t *tr_func,
 292                                             void *arg);
 293 static xpt_busfunc_t    xptdefbusfunc;
 294 static xpt_targetfunc_t xptdeftargetfunc;
 295 static xpt_devicefunc_t xptdefdevicefunc;
 296 static xpt_periphfunc_t xptdefperiphfunc;
 297 static void             xpt_finishconfig_task(void *context, int pending);
 298 static void             xpt_dev_async_default(u_int32_t async_code,
 299                                               struct cam_eb *bus,
 300                                               struct cam_et *target,
 301                                               struct cam_ed *device,
 302                                               void *async_arg);
 303 static struct cam_ed *  xpt_alloc_device_default(struct cam_eb *bus,
 304                                                  struct cam_et *target,
 305                                                  lun_id_t lun_id);
 306 static xpt_devicefunc_t xptsetasyncfunc;
 307 static xpt_busfunc_t    xptsetasyncbusfunc;
 308 static cam_status       xptregister(struct cam_periph *periph,
 309                                     void *arg);
 310 static __inline int device_is_queued(struct cam_ed *device);
 311
 312 static __inline int
 313 xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
 314 {
 315         int     retval;
 316
 317         mtx_assert(&devq->send_mtx, MA_OWNED);
 318         if ((dev->ccbq.queue.entries > 0) &&
 319             (dev->ccbq.dev_openings > 0) &&
 320             (dev->ccbq.queue.qfrozen_cnt == 0)) {
 321                 /*
 322                  * The priority of a device waiting for controller
 323                  * resources is that of the highest priority CCB
 324                  * enqueued.
 325                  */
 326                 retval =
 327                     xpt_schedule_dev(&devq->send_queue,
 328                                      &dev->devq_entry,
 329                                      CAMQ_GET_PRIO(&dev->ccbq.queue));
 330         } else {
 331                 retval = 0;
 332         }
 333         return (retval);
 334 }
 335
 336 static __inline int
 337 device_is_queued(struct cam_ed *device)
 338 {
 339         return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
 340 }
 341
 342 static void
 343 xpt_periph_init()
 344 {
 345         make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
 346 }
 347
 348 static int
 349 xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
 350 {
 351
 352         /*
 353          * Only allow read-write access.
 354          */
 355         if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
 356                 return(EPERM);
 357
 358         /*
 359          * We don't allow nonblocking access.
 360          */
 361         if ((flags & O_NONBLOCK) != 0) {
 362                 printf("%s: can't do nonblocking access\n", devtoname(dev));
 363                 return(ENODEV);
 364         }
 365
 366         return(0);
 367 }
 368
 369 static int
 370 xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
 371 {
 372
 373         return(0);
 374 }
 375
 376 /*
 377  * Don't automatically grab the xpt softc lock here even though this is going
 378  * through the xpt device.  The xpt device is really just a back door for
 379  * accessing other devices and SIMs, so the right thing to do is to grab
 380  * the appropriate SIM lock once the bus/SIM is located.
 381  */
 382 static int
 383 xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
 384 {
 385         int error;
 386
 387         if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
 388                 error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
 389         }
 390         return (error);
 391 }
 392
 393 static int
 394 xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
 395 {
 396         int error;
 397
 398         error = 0;
 399
 400         switch(cmd) {
 401         /*
 402          * For the transport layer CAMIOCOMMAND ioctl, we really only want
 403          * to accept CCB types that don't quite make sense to send through a
 404          * passthrough driver. XPT_PATH_INQ is an exception to this, as stated
 405          * in the CAM spec.
 406          */
 407         case CAMIOCOMMAND: {
 408                 union ccb *ccb;
 409                 union ccb *inccb;
 410                 struct cam_eb *bus;
 411
 412                 inccb = (union ccb *)addr;
 413
 414                 bus = xpt_find_bus(inccb->ccb_h.path_id);
 415                 if (bus == NULL)
 416                         return (EINVAL);
 417
 418                 switch (inccb->ccb_h.func_code) {
 419                 case XPT_SCAN_BUS:
 420                 case XPT_RESET_BUS:
 421                         if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
 422                             inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
 423                                 xpt_release_bus(bus);
 424                                 return (EINVAL);
 425                         }
 426                         break;
 427                 case XPT_SCAN_TGT:
 428                         if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
 429                             inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
 430                                 xpt_release_bus(bus);
 431                                 return (EINVAL);
 432                         }
 433                         break;
 434                 default:
 435                         break;
 436                 }
 437
 438                 switch(inccb->ccb_h.func_code) {
 439                 case XPT_SCAN_BUS:
 440                 case XPT_RESET_BUS:
 441                 case XPT_PATH_INQ:
 442                 case XPT_ENG_INQ:
 443                 case XPT_SCAN_LUN:
 444                 case XPT_SCAN_TGT:
 445
 446                         ccb = xpt_alloc_ccb();
 447
 448                         /*
 449                          * Create a path using the bus, target, and lun the
 450                          * user passed in.
 451                          */
 452                         if (xpt_create_path(&ccb->ccb_h.path, NULL,
 453                                             inccb->ccb_h.path_id,
 454                                             inccb->ccb_h.target_id,
 455                                             inccb->ccb_h.target_lun) !=
 456                                             CAM_REQ_CMP){
 457                                 error = EINVAL;
 458                                 xpt_free_ccb(ccb);
 459                                 break;
 460                         }
 461                         /* Ensure all of our fields are correct */
 462                         xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
 463                                       inccb->ccb_h.pinfo.priority);
 464                         xpt_merge_ccb(ccb, inccb);
 465                         xpt_path_lock(ccb->ccb_h.path);
 466                         cam_periph_runccb(ccb, NULL, 0, 0, NULL);
 467                         xpt_path_unlock(ccb->ccb_h.path);
 468                         bcopy(ccb, inccb, sizeof(union ccb));
 469                         xpt_free_path(ccb->ccb_h.path);
 470                         xpt_free_ccb(ccb);
 471                         break;
 472
 473                 case XPT_DEBUG: {
 474                         union ccb ccb;
 475
 476                         /*
 477                          * This is an immediate CCB, so it's okay to
 478                          * allocate it on the stack.
 479                          */
 480
 481                         /*
 482                          * Create a path using the bus, target, and lun the
 483                          * user passed in.
 484                          */
 485                         if (xpt_create_path(&ccb.ccb_h.path, NULL,
 486                                             inccb->ccb_h.path_id,
 487                                             inccb->ccb_h.target_id,
 488                                             inccb->ccb_h.target_lun) !=
 489                                             CAM_REQ_CMP){
 490                                 error = EINVAL;
 491                                 break;
 492                         }
 493                         /* Ensure all of our fields are correct */
 494                         xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
 495                                       inccb->ccb_h.pinfo.priority);
 496                         xpt_merge_ccb(&ccb, inccb);
 497                         xpt_action(&ccb);
 498                         bcopy(&ccb, inccb, sizeof(union ccb));
 499                         xpt_free_path(ccb.ccb_h.path);
 500                         break;
 501
 502                 }
 503                 case XPT_DEV_MATCH: {
 504                         struct cam_periph_map_info mapinfo;
 505                         struct cam_path *old_path;
 506
 507                         /*
 508                          * We can't deal with physical addresses for this
 509                          * type of transaction.
 510                          */
 511                         if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
 512                             CAM_DATA_VADDR) {
 513                                 error = EINVAL;
 514                                 break;
 515                         }
 516
 517                         /*
 518                          * Save this in case the caller had it set to
 519                          * something in particular.
 520                          */
 521                         old_path = inccb->ccb_h.path;
 522
 523                         /*
 524                          * We really don't need a path for the matching
 525                          * code.  The path is needed because of the
 526                          * debugging statements in xpt_action().  They
 527                          * assume that the CCB has a valid path.
 528                          */
 529                         inccb->ccb_h.path = xpt_periph->path;
 530
 531                         bzero(&mapinfo, sizeof(mapinfo));
 532
 533                         /*
 534                          * Map the pattern and match buffers into kernel
 535                          * virtual address space.
 536                          */
 537                         error = cam_periph_mapmem(inccb, &mapinfo);
 538
 539                         if (error) {
 540                                 inccb->ccb_h.path = old_path;
 541                                 break;
 542                         }
 543
 544                         /*
 545                          * This is an immediate CCB, we can send it on directly.
 546                          */
 547                         xpt_action(inccb);
 548
 549                         /*
 550                          * Map the buffers back into user space.
 551                          */
 552                         cam_periph_unmapmem(inccb, &mapinfo);
 553
 554                         inccb->ccb_h.path = old_path;
 555
 556                         error = 0;
 557                         break;
 558                 }
 559                 default:
 560                         error = ENOTSUP;
 561                         break;
 562                 }
 563                 xpt_release_bus(bus);
 564                 break;
 565         }
 566         /*
 567          * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
 568          * with the periphal driver name and unit name filled in.  The other
 569          * fields don't really matter as input.  The passthrough driver name
 570          * ("pass"), and unit number are passed back in the ccb.  The current
 571          * device generation number, and the index into the device peripheral
 572          * driver list, and the status are also passed back.  Note that
 573          * since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
 574          * we never return a status of CAM_GDEVLIST_LIST_CHANGED.  It is
 575          * (or rather should be) impossible for the device peripheral driver
 576          * list to change since we look at the whole thing in one pass, and
 577          * we do it with lock protection.
 578          *
 579          */
 580         case CAMGETPASSTHRU: {
 581                 union ccb *ccb;
 582                 struct cam_periph *periph;
 583                 struct periph_driver **p_drv;
 584                 char   *name;
 585                 u_int unit;
 586                 int base_periph_found;
 587
 588                 ccb = (union ccb *)addr;
 589                 unit = ccb->cgdl.unit_number;
 590                 name = ccb->cgdl.periph_name;
 591                 base_periph_found = 0;
 592
 593                 /*
 594                  * Sanity check -- make sure we don't get a null peripheral
 595                  * driver name.
 596                  */
 597                 if (*ccb->cgdl.periph_name == '\0') {
 598                         error = EINVAL;
 599                         break;
 600                 }
 601
 602                 /* Keep the list from changing while we traverse it */
 603                 xpt_lock_buses();
 604
 605                 /* first find our driver in the list of drivers */
 606                 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
 607                         if (strcmp((*p_drv)->driver_name, name) == 0)
 608                                 break;
 609
 610                 if (*p_drv == NULL) {
 611                         xpt_unlock_buses();
 612                         ccb->ccb_h.status = CAM_REQ_CMP_ERR;
 613                         ccb->cgdl.status = CAM_GDEVLIST_ERROR;
 614                         *ccb->cgdl.periph_name = '\0';
 615                         ccb->cgdl.unit_number = 0;
 616                         error = ENOENT;
 617                         break;
 618                 }
 619
 620                 /*
 621                  * Run through every peripheral instance of this driver
 622                  * and check to see whether it matches the unit passed
 623                  * in by the user.  If it does, get out of the loops and
 624                  * find the passthrough driver associated with that
 625                  * peripheral driver.
 626                  */
 627                 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
 628                      periph = TAILQ_NEXT(periph, unit_links)) {
 629
 630                         if (periph->unit_number == unit)
 631                                 break;
 632                 }
 633                 /*
 634                  * If we found the peripheral driver that the user passed
 635                  * in, go through all of the peripheral drivers for that
 636                  * particular device and look for a passthrough driver.
 637                  */
 638                 if (periph != NULL) {
 639                         struct cam_ed *device;
 640                         int i;
 641
 642                         base_periph_found = 1;
 643                         device = periph->path->device;
 644                         for (i = 0, periph = SLIST_FIRST(&device->periphs);
 645                              periph != NULL;
 646                              periph = SLIST_NEXT(periph, periph_links), i++) {
 647                                 /*
 648                                  * Check to see whether we have a
 649                                  * passthrough device or not.
 650                                  */
 651                                 if (strcmp(periph->periph_name, "pass") == 0) {
 652                                         /*
 653                                          * Fill in the getdevlist fields.
 654                                          */
 655                                         strcpy(ccb->cgdl.periph_name,
 656                                                periph->periph_name);
 657                                         ccb->cgdl.unit_number =
 658                                                 periph->unit_number;
 659                                         if (SLIST_NEXT(periph, periph_links))
 660                                                 ccb->cgdl.status =
 661                                                         CAM_GDEVLIST_MORE_DEVS;
 662                                         else
 663                                                 ccb->cgdl.status =
 664                                                        CAM_GDEVLIST_LAST_DEVICE;
 665                                         ccb->cgdl.generation =
 666                                                 device->generation;
 667                                         ccb->cgdl.index = i;
 668                                         /*
 669                                          * Fill in some CCB header fields
 670                                          * that the user may want.
 671                                          */
 672                                         ccb->ccb_h.path_id =
 673                                                 periph->path->bus->path_id;
 674                                         ccb->ccb_h.target_id =
 675                                                 periph->path->target->target_id;
 676                                         ccb->ccb_h.target_lun =
 677                                                 periph->path->device->lun_id;
 678                                         ccb->ccb_h.status = CAM_REQ_CMP;
 679                                         break;
 680                                 }
 681                         }
 682                 }
 683
 684                 /*
 685                  * If the periph is null here, one of two things has
 686                  * happened.  The first possibility is that we couldn't
 687                  * find the unit number of the particular peripheral driver
 688                  * that the user is asking about.  e.g. the user asks for
 689                  * the passthrough driver for "da11".  We find the list of
 690                  * "da" peripherals all right, but there is no unit 11.
 691                  * The other possibility is that we went through the list
 692                  * of peripheral drivers attached to the device structure,
 693                  * but didn't find one with the name "pass".  Either way,
 694                  * we return ENOENT, since we couldn't find something.
 695                  */
 696                 if (periph == NULL) {
 697                         ccb->ccb_h.status = CAM_REQ_CMP_ERR;
 698                         ccb->cgdl.status = CAM_GDEVLIST_ERROR;
 699                         *ccb->cgdl.periph_name = '\0';
 700                         ccb->cgdl.unit_number = 0;
 701                         error = ENOENT;
 702                         /*
 703                          * It is unfortunate that this is even necessary,
 704                          * but there are many, many clueless users out there.
 705                          * If this is true, the user is looking for the
 706                          * passthrough driver, but doesn't have one in his
 707                          * kernel.
 708                          */
 709                         if (base_periph_found == 1) {
 710                                 printf("xptioctl: pass driver is not in the "
 711                                        "kernel\n");
 712                                 printf("xptioctl: put \"device pass\" in "
 713                                        "your kernel config file\n");
 714                         }
 715                 }
 716                 xpt_unlock_buses();
 717                 break;
 718                 }
 719         default:
 720                 error = ENOTTY;
 721                 break;
 722         }
 723
 724         return(error);
 725 }
 726
 727 static int
 728 cam_module_event_handler(module_t mod, int what, void *arg)
 729 {
 730         int error;
 731
 732         switch (what) {
 733         case MOD_LOAD:
 734                 if ((error = xpt_init(NULL)) != 0)
 735                         return (error);
 736                 break;
 737         case MOD_UNLOAD:
 738                 return EBUSY;
 739         default:
 740                 return EOPNOTSUPP;
 741         }
 742
 743         return 0;
 744 }
 745
 746 static void
 747 xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
 748 {
 749
 750         if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
 751                 xpt_free_path(done_ccb->ccb_h.path);
 752                 xpt_free_ccb(done_ccb);
 753         } else {
 754                 done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
 755                 (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
 756         }
 757         xpt_release_boot();
 758 }
 759
 760 /* thread to handle bus rescans */
 761 static void
 762 xpt_scanner_thread(void *dummy)
 763 {
 764         union ccb       *ccb;
 765         struct cam_path  path;
 766
 767         xpt_lock_buses();
 768         for (;;) {
 769                 if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
 770                         msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
 771                                "ccb_scanq", 0);
 772                 if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
 773                         TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
 774                         xpt_unlock_buses();
 775
 776                         /*
 777                          * Since lock can be dropped inside and path freed
 778                          * by completion callback even before return here,
 779                          * take our own path copy for reference.
 780                          */
 781                         xpt_copy_path(&path, ccb->ccb_h.path);
 782                         xpt_path_lock(&path);
 783                         xpt_action(ccb);
 784                         xpt_path_unlock(&path);
 785                         xpt_release_path(&path);
 786
 787                         xpt_lock_buses();
 788                 }
 789         }
 790 }
 791
 792 void
 793 xpt_rescan(union ccb *ccb)
 794 {
 795         struct ccb_hdr *hdr;
 796
 797         /* Prepare request */
 798         if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
 799             ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
 800                 ccb->ccb_h.func_code = XPT_SCAN_BUS;
 801         else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
 802             ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
 803                 ccb->ccb_h.func_code = XPT_SCAN_TGT;
 804         else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
 805             ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
 806                 ccb->ccb_h.func_code = XPT_SCAN_LUN;
 807         else {
 808                 xpt_print(ccb->ccb_h.path, "illegal scan path\n");
 809                 xpt_free_path(ccb->ccb_h.path);
 810                 xpt_free_ccb(ccb);
 811                 return;
 812         }
 813         ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
 814         ccb->ccb_h.cbfcnp = xpt_rescan_done;
 815         xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
 816         /* Don't make duplicate entries for the same paths. */
 817         xpt_lock_buses();
 818         if (ccb->ccb_h.ppriv_ptr1 == NULL) {
 819                 TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
 820                         if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
 821                                 wakeup(&xsoftc.ccb_scanq);
 822                                 xpt_unlock_buses();
 823                                 xpt_print(ccb->ccb_h.path, "rescan already queued\n");
 824                                 xpt_free_path(ccb->ccb_h.path);
 825                                 xpt_free_ccb(ccb);
 826                                 return;
 827                         }
 828                 }
 829         }
 830         TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
 831         xsoftc.buses_to_config++;
 832         wakeup(&xsoftc.ccb_scanq);
 833         xpt_unlock_buses();
 834 }
 835
 836 /* Functions accessed by the peripheral drivers */
 837 static int
 838 xpt_init(void *dummy)
 839 {
 840         struct cam_sim *xpt_sim;
 841         struct cam_path *path;
 842         struct cam_devq *devq;
 843         cam_status status;
 844         int error, i;
 845
 846         TAILQ_INIT(&xsoftc.xpt_busses);
 847         TAILQ_INIT(&xsoftc.ccb_scanq);
 848         STAILQ_INIT(&xsoftc.highpowerq);
 849         xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
 850
 851         mtx_init(&xsoftc.xpt_lock, "XPT lock", NULL, MTX_DEF);
 852         mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
 853         mtx_init(&xsoftc.xpt_topo_lock, "XPT topology lock", NULL, MTX_DEF);
 854         xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
 855             taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
 856
 857 #ifdef CAM_BOOT_DELAY
 858         /*
 859          * Override this value at compile time to assist our users
 860          * who don't use loader to boot a kernel.
 861          */
 862         xsoftc.boot_delay = CAM_BOOT_DELAY;
 863 #endif
 864         /*
 865          * The xpt layer is, itself, the equivelent of a SIM.
 866          * Allow 16 ccbs in the ccb pool for it.  This should
 867          * give decent parallelism when we probe busses and
 868          * perform other XPT functions.
 869          */
 870         devq = cam_simq_alloc(16);
 871         xpt_sim = cam_sim_alloc(xptaction,
 872                                 xptpoll,
 873                                 "xpt",
 874                                 /*softc*/NULL,
 875                                 /*unit*/0,
 876                                 /*mtx*/&xsoftc.xpt_lock,
 877                                 /*max_dev_transactions*/0,
 878                                 /*max_tagged_dev_transactions*/0,
 879                                 devq);
 880         if (xpt_sim == NULL)
 881                 return (ENOMEM);
 882
 883         mtx_lock(&xsoftc.xpt_lock);
 884         if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
 885                 mtx_unlock(&xsoftc.xpt_lock);
 886                 printf("xpt_init: xpt_bus_register failed with status %#x,"
 887                        " failing attach\n", status);
 888                 return (EINVAL);
 889         }
 890         mtx_unlock(&xsoftc.xpt_lock);
 891
 892         /*
 893          * Looking at the XPT from the SIM layer, the XPT is
 894          * the equivelent of a peripheral driver.  Allocate
 895          * a peripheral driver entry for us.
 896          */
 897         if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
 898                                       CAM_TARGET_WILDCARD,
 899                                       CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
 900                 mtx_unlock(&xsoftc.xpt_lock);
 901                 printf("xpt_init: xpt_create_path failed with status %#x,"
 902                        " failing attach\n", status);
 903                 return (EINVAL);
 904         }
 905         xpt_path_lock(path);
 906         cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
 907                          path, NULL, 0, xpt_sim);
 908         xpt_path_unlock(path);
 909         xpt_free_path(path);
 910
 911         if (cam_num_doneqs < 1)
 912                 cam_num_doneqs = 1 + mp_ncpus / 6;
 913         else if (cam_num_doneqs > MAXCPU)
 914                 cam_num_doneqs = MAXCPU;
 915         for (i = 0; i < cam_num_doneqs; i++) {
 916                 mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
 917                     MTX_DEF);
 918                 STAILQ_INIT(&cam_doneqs[i].cam_doneq);
 919                 error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
 920                     &cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
 921                 if (error != 0) {
 922                         cam_num_doneqs = i;
 923                         break;
 924                 }
 925         }
 926         if (cam_num_doneqs < 1) {
 927                 printf("xpt_init: Cannot init completion queues "
 928                        "- failing attach\n");
 929                 return (ENOMEM);
 930         }
 931         /*
 932          * Register a callback for when interrupts are enabled.
 933          */
 934         xsoftc.xpt_config_hook =
 935             (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook),
 936                                               M_CAMXPT, M_NOWAIT | M_ZERO);
 937         if (xsoftc.xpt_config_hook == NULL) {
 938                 printf("xpt_init: Cannot malloc config hook "
 939                        "- failing attach\n");
 940                 return (ENOMEM);
 941         }
 942         xsoftc.xpt_config_hook->ich_func = xpt_config;
 943         if (config_intrhook_establish(xsoftc.xpt_config_hook) != 0) {
 944                 free (xsoftc.xpt_config_hook, M_CAMXPT);
 945                 printf("xpt_init: config_intrhook_establish failed "
 946                        "- failing attach\n");
 947         }
 948
 949         return (0);
 950 }
 951
 952 static cam_status
 953 xptregister(struct cam_periph *periph, void *arg)
 954 {
 955         struct cam_sim *xpt_sim;
 956
 957         if (periph == NULL) {
 958                 printf("xptregister: periph was NULL!!\n");
 959                 return(CAM_REQ_CMP_ERR);
 960         }
 961
 962         xpt_sim = (struct cam_sim *)arg;
 963         xpt_sim->softc = periph;
 964         xpt_periph = periph;
 965         periph->softc = NULL;
 966
 967         return(CAM_REQ_CMP);
 968 }
 969
 970 int32_t
 971 xpt_add_periph(struct cam_periph *periph)
 972 {
 973         struct cam_ed *device;
 974         int32_t  status;
 975
 976         TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
 977         device = periph->path->device;
 978         status = CAM_REQ_CMP;
 979         if (device != NULL) {
 980                 mtx_lock(&device->target->bus->eb_mtx);
 981                 device->generation++;
 982                 SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
 983                 mtx_unlock(&device->target->bus->eb_mtx);
 984         }
 985
 986         return (status);
 987 }
 988
 989 void
 990 xpt_remove_periph(struct cam_periph *periph)
 991 {
 992         struct cam_ed *device;
 993
 994         device = periph->path->device;
 995         if (device != NULL) {
 996                 mtx_lock(&device->target->bus->eb_mtx);
 997                 device->generation++;
 998                 SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
 999                 mtx_unlock(&device->target->bus->eb_mtx);
1000         }
1001 }
1002
1003
1004 void
1005 xpt_announce_periph(struct cam_periph *periph, char *announce_string)
1006 {
1007         struct  cam_path *path = periph->path;
1008
1009         cam_periph_assert(periph, MA_OWNED);
1010         periph->flags |= CAM_PERIPH_ANNOUNCED;
1011
1012         printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1013                periph->periph_name, periph->unit_number,
1014                path->bus->sim->sim_name,
1015                path->bus->sim->unit_number,
1016                path->bus->sim->bus_id,
1017                path->bus->path_id,
1018                path->target->target_id,
1019                (uintmax_t)path->device->lun_id);
1020         printf("%s%d: ", periph->periph_name, periph->unit_number);
1021         if (path->device->protocol == PROTO_SCSI)
1022                 scsi_print_inquiry(&path->device->inq_data);
1023         else if (path->device->protocol == PROTO_ATA ||
1024             path->device->protocol == PROTO_SATAPM)
1025                 ata_print_ident(&path->device->ident_data);
1026         else if (path->device->protocol == PROTO_SEMB)
1027                 semb_print_ident(
1028                     (struct sep_identify_data *)&path->device->ident_data);
1029         else
1030                 printf("Unknown protocol device\n");
1031         if (path->device->serial_num_len > 0) {
1032                 /* Don't wrap the screen  - print only the first 60 chars */
1033                 printf("%s%d: Serial Number %.60s\n", periph->periph_name,
1034                        periph->unit_number, path->device->serial_num);
1035         }
1036         /* Announce transport details. */
1037         (*(path->bus->xport->announce))(periph);
1038         /* Announce command queueing. */
1039         if (path->device->inq_flags & SID_CmdQue
1040          || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1041                 printf("%s%d: Command Queueing enabled\n",
1042                        periph->periph_name, periph->unit_number);
1043         }
1044         /* Announce caller's details if they've passed in. */
1045         if (announce_string != NULL)
1046                 printf("%s%d: %s\n", periph->periph_name,
1047                        periph->unit_number, announce_string);
1048 }
1049
1050 void
1051 xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
1052 {
1053         if (quirks != 0) {
1054                 printf("%s%d: quirks=0x%b\n", periph->periph_name,
1055                     periph->unit_number, quirks, bit_string);
1056         }
1057 }
1058
1059 void
1060 xpt_denounce_periph(struct cam_periph *periph)
1061 {
1062         struct  cam_path *path = periph->path;
1063
1064         cam_periph_assert(periph, MA_OWNED);
1065         printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1066                periph->periph_name, periph->unit_number,
1067                path->bus->sim->sim_name,
1068                path->bus->sim->unit_number,
1069                path->bus->sim->bus_id,
1070                path->bus->path_id,
1071                path->target->target_id,
1072                (uintmax_t)path->device->lun_id);
1073         printf("%s%d: ", periph->periph_name, periph->unit_number);
1074         if (path->device->protocol == PROTO_SCSI)
1075                 scsi_print_inquiry_short(&path->device->inq_data);
1076         else if (path->device->protocol == PROTO_ATA ||
1077             path->device->protocol == PROTO_SATAPM)
1078                 ata_print_ident_short(&path->device->ident_data);
1079         else if (path->device->protocol == PROTO_SEMB)
1080                 semb_print_ident_short(
1081                     (struct sep_identify_data *)&path->device->ident_data);
1082         else
1083                 printf("Unknown protocol device");
1084         if (path->device->serial_num_len > 0)
1085                 printf(" s/n %.60s", path->device->serial_num);
1086         printf(" detached\n");
1087 }
1088
1089
1090 int
1091 xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
1092 {
1093         int ret = -1, l;
1094         struct ccb_dev_advinfo cdai;
1095         struct scsi_vpd_id_descriptor *idd;
1096
1097         xpt_path_assert(path, MA_OWNED);
1098
1099         memset(&cdai, 0, sizeof(cdai));
1100         xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
1101         cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
1102         cdai.bufsiz = len;
1103
1104         if (!strcmp(attr, "GEOM::ident"))
1105                 cdai.buftype = CDAI_TYPE_SERIAL_NUM;
1106         else if (!strcmp(attr, "GEOM::physpath"))
1107                 cdai.buftype = CDAI_TYPE_PHYS_PATH;
1108         else if (strcmp(attr, "GEOM::lunid") == 0 ||
1109                  strcmp(attr, "GEOM::lunname") == 0) {
1110                 cdai.buftype = CDAI_TYPE_SCSI_DEVID;
1111                 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
1112         } else
1113                 goto out;
1114
1115         cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT|M_ZERO);
1116         if (cdai.buf == NULL) {
1117                 ret = ENOMEM;
1118                 goto out;
1119         }
1120         xpt_action((union ccb *)&cdai); /* can only be synchronous */
1121         if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
1122                 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
1123         if (cdai.provsiz == 0)
1124                 goto out;
1125         if (cdai.buftype == CDAI_TYPE_SCSI_DEVID) {
1126                 if (strcmp(attr, "GEOM::lunid") == 0) {
1127                         idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1128                             cdai.provsiz, scsi_devid_is_lun_naa);
1129                         if (idd == NULL)
1130                                 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1131                                     cdai.provsiz, scsi_devid_is_lun_eui64);
1132                 } else
1133                         idd = NULL;
1134                 if (idd == NULL)
1135                         idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1136                             cdai.provsiz, scsi_devid_is_lun_t10);
1137                 if (idd == NULL)
1138                         idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1139                             cdai.provsiz, scsi_devid_is_lun_name);
1140                 if (idd == NULL)
1141                         goto out;
1142                 ret = 0;
1143                 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_ASCII ||
1144                     (idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_UTF8) {
1145                         l = strnlen(idd->identifier, idd->length);
1146                         if (l < len) {
1147                                 bcopy(idd->identifier, buf, l);
1148                                 buf[l] = 0;
1149                         } else
1150                                 ret = EFAULT;
1151                 } else {
1152                         if (idd->length * 2 < len) {
1153                                 for (l = 0; l < idd->length; l++)
1154                                         sprintf(buf + l * 2, "%02x",
1155                                             idd->identifier[l]);
1156                         } else
1157                                 ret = EFAULT;
1158                 }
1159         } else {
1160                 ret = 0;
1161                 if (strlcpy(buf, cdai.buf, len) >= len)
1162                         ret = EFAULT;
1163         }
1164
1165 out:
1166         if (cdai.buf != NULL)
1167                 free(cdai.buf, M_CAMXPT);
1168         return ret;
1169 }
1170
1171 static dev_match_ret
1172 xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1173             struct cam_eb *bus)
1174 {
1175         dev_match_ret retval;
1176         int i;
1177
1178         retval = DM_RET_NONE;
1179
1180         /*
1181          * If we aren't given something to match against, that's an error.
1182          */
1183         if (bus == NULL)
1184                 return(DM_RET_ERROR);
1185
1186         /*
1187          * If there are no match entries, then this bus matches no
1188          * matter what.
1189          */
1190         if ((patterns == NULL) || (num_patterns == 0))
1191                 return(DM_RET_DESCEND | DM_RET_COPY);
1192
1193         for (i = 0; i < num_patterns; i++) {
1194                 struct bus_match_pattern *cur_pattern;
1195
1196                 /*
1197                  * If the pattern in question isn't for a bus node, we
1198                  * aren't interested.  However, we do indicate to the
1199                  * calling routine that we should continue descending the
1200                  * tree, since the user wants to match against lower-level
1201                  * EDT elements.
1202                  */
1203                 if (patterns[i].type != DEV_MATCH_BUS) {
1204                         if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1205                                 retval |= DM_RET_DESCEND;
1206                         continue;
1207                 }
1208
1209                 cur_pattern = &patterns[i].pattern.bus_pattern;
1210
1211                 /*
1212                  * If they want to match any bus node, we give them any
1213                  * device node.
1214                  */
1215                 if (cur_pattern->flags == BUS_MATCH_ANY) {
1216                         /* set the copy flag */
1217                         retval |= DM_RET_COPY;
1218
1219                         /*
1220                          * If we've already decided on an action, go ahead
1221                          * and return.
1222                          */
1223                         if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE)
1224                                 return(retval);
1225                 }
1226
1227                 /*
1228                  * Not sure why someone would do this...
1229                  */
1230                 if (cur_pattern->flags == BUS_MATCH_NONE)
1231                         continue;
1232
1233                 if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
1234                  && (cur_pattern->path_id != bus->path_id))
1235                         continue;
1236
1237                 if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
1238                  && (cur_pattern->bus_id != bus->sim->bus_id))
1239                         continue;
1240
1241                 if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
1242                  && (cur_pattern->unit_number != bus->sim->unit_number))
1243                         continue;
1244
1245                 if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
1246                  && (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
1247                              DEV_IDLEN) != 0))
1248                         continue;
1249
1250                 /*
1251                  * If we get to this point, the user definitely wants
1252                  * information on this bus.  So tell the caller to copy the
1253                  * data out.
1254                  */
1255                 retval |= DM_RET_COPY;
1256
1257                 /*
1258                  * If the return action has been set to descend, then we
1259                  * know that we've already seen a non-bus matching
1260                  * expression, therefore we need to further descend the tree.
1261                  * This won't change by continuing around the loop, so we
1262                  * go ahead and return.  If we haven't seen a non-bus
1263                  * matching expression, we keep going around the loop until
1264                  * we exhaust the matching expressions.  We'll set the stop
1265                  * flag once we fall out of the loop.
1266                  */
1267                 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1268                         return(retval);
1269         }
1270
1271         /*
1272          * If the return action hasn't been set to descend yet, that means
1273          * we haven't seen anything other than bus matching patterns.  So
1274          * tell the caller to stop descending the tree -- the user doesn't
1275          * want to match against lower level tree elements.
1276          */
1277         if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1278                 retval |= DM_RET_STOP;
1279
1280         return(retval);
1281 }
1282
1283 static dev_match_ret
1284 xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
1285                struct cam_ed *device)
1286 {
1287         dev_match_ret retval;
1288         int i;
1289
1290         retval = DM_RET_NONE;
1291
1292         /*
1293          * If we aren't given something to match against, that's an error.
1294          */
1295         if (device == NULL)
1296                 return(DM_RET_ERROR);
1297
1298         /*
1299          * If there are no match entries, then this device matches no
1300          * matter what.
1301          */
1302         if ((patterns == NULL) || (num_patterns == 0))
1303                 return(DM_RET_DESCEND | DM_RET_COPY);
1304
1305         for (i = 0; i < num_patterns; i++) {
1306                 struct device_match_pattern *cur_pattern;
1307                 struct scsi_vpd_device_id *device_id_page;
1308
1309                 /*
1310                  * If the pattern in question isn't for a device node, we
1311                  * aren't interested.
1312                  */
1313                 if (patterns[i].type != DEV_MATCH_DEVICE) {
1314                         if ((patterns[i].type == DEV_MATCH_PERIPH)
1315                          && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
1316                                 retval |= DM_RET_DESCEND;
1317                         continue;
1318                 }
1319
1320                 cur_pattern = &patterns[i].pattern.device_pattern;
1321
1322                 /* Error out if mutually exclusive options are specified. */
1323                 if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1324                  == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1325                         return(DM_RET_ERROR);
1326
1327                 /*
1328                  * If they want to match any device node, we give them any
1329                  * device node.
1330                  */
1331                 if (cur_pattern->flags == DEV_MATCH_ANY)
1332                         goto copy_dev_node;
1333
1334                 /*
1335                  * Not sure why someone would do this...
1336                  */
1337                 if (cur_pattern->flags == DEV_MATCH_NONE)
1338                         continue;
1339
1340                 if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
1341                  && (cur_pattern->path_id != device->target->bus->path_id))
1342                         continue;
1343
1344                 if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
1345                  && (cur_pattern->target_id != device->target->target_id))
1346                         continue;
1347
1348                 if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
1349                  && (cur_pattern->target_lun != device->lun_id))
1350                         continue;
1351
1352                 if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
1353                  && (cam_quirkmatch((caddr_t)&device->inq_data,
1354                                     (caddr_t)&cur_pattern->data.inq_pat,
1355                                     1, sizeof(cur_pattern->data.inq_pat),
1356                                     scsi_static_inquiry_match) == NULL))
1357                         continue;
1358
1359                 device_id_page = (struct scsi_vpd_device_id *)device->device_id;
1360                 if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
1361                  && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
1362                   || scsi_devid_match((uint8_t *)device_id_page->desc_list,
1363                                       device->device_id_len
1364                                     - SVPD_DEVICE_ID_HDR_LEN,
1365                                       cur_pattern->data.devid_pat.id,
1366                                       cur_pattern->data.devid_pat.id_len) != 0))
1367                         continue;
1368
1369 copy_dev_node:
1370                 /*
1371                  * If we get to this point, the user definitely wants
1372                  * information on this device.  So tell the caller to copy
1373                  * the data out.
1374                  */
1375                 retval |= DM_RET_COPY;
1376
1377                 /*
1378                  * If the return action has been set to descend, then we
1379                  * know that we've already seen a peripheral matching
1380                  * expression, therefore we need to further descend the tree.
1381                  * This won't change by continuing around the loop, so we
1382                  * go ahead and return.  If we haven't seen a peripheral
1383                  * matching expression, we keep going around the loop until
1384                  * we exhaust the matching expressions.  We'll set the stop
1385                  * flag once we fall out of the loop.
1386                  */
1387                 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1388                         return(retval);
1389         }
1390
1391         /*
1392          * If the return action hasn't been set to descend yet, that means
1393          * we haven't seen any peripheral matching patterns.  So tell the
1394          * caller to stop descending the tree -- the user doesn't want to
1395          * match against lower level tree elements.
1396          */
1397         if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1398                 retval |= DM_RET_STOP;
1399
1400         return(retval);
1401 }
1402
1403 /*
1404  * Match a single peripheral against any number of match patterns.
1405  */
1406 static dev_match_ret
1407 xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1408                struct cam_periph *periph)
1409 {
1410         dev_match_ret retval;
1411         int i;
1412
1413         /*
1414          * If we aren't given something to match against, that's an error.
1415          */
1416         if (periph == NULL)
1417                 return(DM_RET_ERROR);
1418
1419         /*
1420          * If there are no match entries, then this peripheral matches no
1421          * matter what.
1422          */
1423         if ((patterns == NULL) || (num_patterns == 0))
1424                 return(DM_RET_STOP | DM_RET_COPY);
1425
1426         /*
1427          * There aren't any nodes below a peripheral node, so there's no
1428          * reason to descend the tree any further.
1429          */
1430         retval = DM_RET_STOP;
1431
1432         for (i = 0; i < num_patterns; i++) {
1433                 struct periph_match_pattern *cur_pattern;
1434
1435                 /*
1436                  * If the pattern in question isn't for a peripheral, we
1437                  * aren't interested.
1438                  */
1439                 if (patterns[i].type != DEV_MATCH_PERIPH)
1440                         continue;
1441
1442                 cur_pattern = &patterns[i].pattern.periph_pattern;
1443
1444                 /*
1445                  * If they want to match on anything, then we will do so.
1446                  */
1447                 if (cur_pattern->flags == PERIPH_MATCH_ANY) {
1448                         /* set the copy flag */
1449                         retval |= DM_RET_COPY;
1450
1451                         /*
1452                          * We've already set the return action to stop,
1453                          * since there are no nodes below peripherals in
1454                          * the tree.
1455                          */
1456                         return(retval);
1457                 }
1458
1459                 /*
1460                  * Not sure why someone would do this...
1461                  */
1462                 if (cur_pattern->flags == PERIPH_MATCH_NONE)
1463                         continue;
1464
1465                 if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
1466                  && (cur_pattern->path_id != periph->path->bus->path_id))
1467                         continue;
1468
1469                 /*
1470                  * For the target and lun id's, we have to make sure the
1471                  * target and lun pointers aren't NULL.  The xpt peripheral
1472                  * has a wildcard target and device.
1473                  */
1474                 if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
1475                  && ((periph->path->target == NULL)
1476                  ||(cur_pattern->target_id != periph->path->target->target_id)))
1477                         continue;
1478
1479                 if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
1480                  && ((periph->path->device == NULL)
1481                  || (cur_pattern->target_lun != periph->path->device->lun_id)))
1482                         continue;
1483
1484                 if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
1485                  && (cur_pattern->unit_number != periph->unit_number))
1486                         continue;
1487
1488                 if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
1489                  && (strncmp(cur_pattern->periph_name, periph->periph_name,
1490                              DEV_IDLEN) != 0))
1491                         continue;
1492
1493                 /*
1494                  * If we get to this point, the user definitely wants
1495                  * information on this peripheral.  So tell the caller to
1496                  * copy the data out.
1497                  */
1498                 retval |= DM_RET_COPY;
1499
1500                 /*
1501                  * The return action has already been set to stop, since
1502                  * peripherals don't have any nodes below them in the EDT.
1503                  */
1504                 return(retval);
1505         }
1506
1507         /*
1508          * If we get to this point, the peripheral that was passed in
1509          * doesn't match any of the patterns.
1510          */
1511         return(retval);
1512 }
1513
1514 static int
1515 xptedtbusfunc(struct cam_eb *bus, void *arg)
1516 {
1517         struct ccb_dev_match *cdm;
1518         struct cam_et *target;
1519         dev_match_ret retval;
1520
1521         cdm = (struct ccb_dev_match *)arg;
1522
1523         /*
1524          * If our position is for something deeper in the tree, that means
1525          * that we've already seen this node.  So, we keep going down.
1526          */
1527         if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1528          && (cdm->pos.cookie.bus == bus)
1529          && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1530          && (cdm->pos.cookie.target != NULL))
1531                 retval = DM_RET_DESCEND;
1532         else
1533                 retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
1534
1535         /*
1536          * If we got an error, bail out of the search.
1537          */
1538         if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1539                 cdm->status = CAM_DEV_MATCH_ERROR;
1540                 return(0);
1541         }
1542
1543         /*
1544          * If the copy flag is set, copy this bus out.
1545          */
1546         if (retval & DM_RET_COPY) {
1547                 int spaceleft, j;
1548
1549                 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1550                         sizeof(struct dev_match_result));
1551
1552                 /*
1553                  * If we don't have enough space to put in another
1554                  * match result, save our position and tell the
1555                  * user there are more devices to check.
1556                  */
1557                 if (spaceleft < sizeof(struct dev_match_result)) {
1558                         bzero(&cdm->pos, sizeof(cdm->pos));
1559                         cdm->pos.position_type =
1560                                 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
1561
1562                         cdm->pos.cookie.bus = bus;
1563                         cdm->pos.generations[CAM_BUS_GENERATION]=
1564                                 xsoftc.bus_generation;
1565                         cdm->status = CAM_DEV_MATCH_MORE;
1566                         return(0);
1567                 }
1568                 j = cdm->num_matches;
1569                 cdm->num_matches++;
1570                 cdm->matches[j].type = DEV_MATCH_BUS;
1571                 cdm->matches[j].result.bus_result.path_id = bus->path_id;
1572                 cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
1573                 cdm->matches[j].result.bus_result.unit_number =
1574                         bus->sim->unit_number;
1575                 strncpy(cdm->matches[j].result.bus_result.dev_name,
1576                         bus->sim->sim_name, DEV_IDLEN);
1577         }
1578
1579         /*
1580          * If the user is only interested in busses, there's no
1581          * reason to descend to the next level in the tree.
1582          */
1583         if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1584                 return(1);
1585
1586         /*
1587          * If there is a target generation recorded, check it to
1588          * make sure the target list hasn't changed.
1589          */
1590         mtx_lock(&bus->eb_mtx);
1591         if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1592          && (cdm->pos.cookie.bus == bus)
1593          && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1594          && (cdm->pos.cookie.target != NULL)) {
1595                 if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
1596                     bus->generation)) {
1597                         mtx_unlock(&bus->eb_mtx);
1598                         cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1599                         return (0);
1600                 }
1601                 target = (struct cam_et *)cdm->pos.cookie.target;
1602                 target->refcount++;
1603         } else
1604                 target = NULL;
1605         mtx_unlock(&bus->eb_mtx);
1606
1607         return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
1608 }
1609
1610 static int
1611 xptedttargetfunc(struct cam_et *target, void *arg)
1612 {
1613         struct ccb_dev_match *cdm;
1614         struct cam_eb *bus;
1615         struct cam_ed *device;
1616
1617         cdm = (struct ccb_dev_match *)arg;
1618         bus = target->bus;
1619
1620         /*
1621          * If there is a device list generation recorded, check it to
1622          * make sure the device list hasn't changed.
1623          */
1624         mtx_lock(&bus->eb_mtx);
1625         if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1626          && (cdm->pos.cookie.bus == bus)
1627          && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1628          && (cdm->pos.cookie.target == target)
1629          && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1630          && (cdm->pos.cookie.device != NULL)) {
1631                 if (cdm->pos.generations[CAM_DEV_GENERATION] !=
1632                     target->generation) {
1633                         mtx_unlock(&bus->eb_mtx);
1634                         cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1635                         return(0);
1636                 }
1637                 device = (struct cam_ed *)cdm->pos.cookie.device;
1638                 device->refcount++;
1639         } else
1640                 device = NULL;
1641         mtx_unlock(&bus->eb_mtx);
1642
1643         return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
1644 }
1645
1646 static int
1647 xptedtdevicefunc(struct cam_ed *device, void *arg)
1648 {
1649         struct cam_eb *bus;
1650         struct cam_periph *periph;
1651         struct ccb_dev_match *cdm;
1652         dev_match_ret retval;
1653
1654         cdm = (struct ccb_dev_match *)arg;
1655         bus = device->target->bus;
1656
1657         /*
1658          * If our position is for something deeper in the tree, that means
1659          * that we've already seen this node.  So, we keep going down.
1660          */
1661         if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1662          && (cdm->pos.cookie.device == device)
1663          && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1664          && (cdm->pos.cookie.periph != NULL))
1665                 retval = DM_RET_DESCEND;
1666         else
1667                 retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
1668                                         device);
1669
1670         if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1671                 cdm->status = CAM_DEV_MATCH_ERROR;
1672                 return(0);
1673         }
1674
1675         /*
1676          * If the copy flag is set, copy this device out.
1677          */
1678         if (retval & DM_RET_COPY) {
1679                 int spaceleft, j;
1680
1681                 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1682                         sizeof(struct dev_match_result));
1683
1684                 /*
1685                  * If we don't have enough space to put in another
1686                  * match result, save our position and tell the
1687                  * user there are more devices to check.
1688                  */
1689                 if (spaceleft < sizeof(struct dev_match_result)) {
1690                         bzero(&cdm->pos, sizeof(cdm->pos));
1691                         cdm->pos.position_type =
1692                                 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1693                                 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
1694
1695                         cdm->pos.cookie.bus = device->target->bus;
1696                         cdm->pos.generations[CAM_BUS_GENERATION]=
1697                                 xsoftc.bus_generation;
1698                         cdm->pos.cookie.target = device->target;
1699                         cdm->pos.generations[CAM_TARGET_GENERATION] =
1700                                 device->target->bus->generation;
1701                         cdm->pos.cookie.device = device;
1702                         cdm->pos.generations[CAM_DEV_GENERATION] =
1703                                 device->target->generation;
1704                         cdm->status = CAM_DEV_MATCH_MORE;
1705                         return(0);
1706                 }
1707                 j = cdm->num_matches;
1708                 cdm->num_matches++;
1709                 cdm->matches[j].type = DEV_MATCH_DEVICE;
1710                 cdm->matches[j].result.device_result.path_id =
1711                         device->target->bus->path_id;
1712                 cdm->matches[j].result.device_result.target_id =
1713                         device->target->target_id;
1714                 cdm->matches[j].result.device_result.target_lun =
1715                         device->lun_id;
1716                 cdm->matches[j].result.device_result.protocol =
1717                         device->protocol;
1718                 bcopy(&device->inq_data,
1719                       &cdm->matches[j].result.device_result.inq_data,
1720                       sizeof(struct scsi_inquiry_data));
1721                 bcopy(&device->ident_data,
1722                       &cdm->matches[j].result.device_result.ident_data,
1723                       sizeof(struct ata_params));
1724
1725                 /* Let the user know whether this device is unconfigured */
1726                 if (device->flags & CAM_DEV_UNCONFIGURED)
1727                         cdm->matches[j].result.device_result.flags =
1728                                 DEV_RESULT_UNCONFIGURED;
1729                 else
1730                         cdm->matches[j].result.device_result.flags =
1731                                 DEV_RESULT_NOFLAG;
1732         }
1733
1734         /*
1735          * If the user isn't interested in peripherals, don't descend
1736          * the tree any further.
1737          */
1738         if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1739                 return(1);
1740
1741         /*
1742          * If there is a peripheral list generation recorded, make sure
1743          * it hasn't changed.
1744          */
1745         xpt_lock_buses();
1746         mtx_lock(&bus->eb_mtx);
1747         if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1748          && (cdm->pos.cookie.bus == bus)
1749          && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1750          && (cdm->pos.cookie.target == device->target)
1751          && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1752          && (cdm->pos.cookie.device == device)
1753          && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1754          && (cdm->pos.cookie.periph != NULL)) {
1755                 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1756                     device->generation) {
1757                         mtx_unlock(&bus->eb_mtx);
1758                         xpt_unlock_buses();
1759                         cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1760                         return(0);
1761                 }
1762                 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1763                 periph->refcount++;
1764         } else
1765                 periph = NULL;
1766         mtx_unlock(&bus->eb_mtx);
1767         xpt_unlock_buses();
1768
1769         return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
1770 }
1771
1772 static int
1773 xptedtperiphfunc(struct cam_periph *periph, void *arg)
1774 {
1775         struct ccb_dev_match *cdm;
1776         dev_match_ret retval;
1777
1778         cdm = (struct ccb_dev_match *)arg;
1779
1780         retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1781
1782         if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1783                 cdm->status = CAM_DEV_MATCH_ERROR;
1784                 return(0);
1785         }
1786
1787         /*
1788          * If the copy flag is set, copy this peripheral out.
1789          */
1790         if (retval & DM_RET_COPY) {
1791                 int spaceleft, j;
1792
1793                 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1794                         sizeof(struct dev_match_result));
1795
1796                 /*
1797                  * If we don't have enough space to put in another
1798                  * match result, save our position and tell the
1799                  * user there are more devices to check.
1800                  */
1801                 if (spaceleft < sizeof(struct dev_match_result)) {
1802                         bzero(&cdm->pos, sizeof(cdm->pos));
1803                         cdm->pos.position_type =
1804                                 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1805                                 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
1806                                 CAM_DEV_POS_PERIPH;
1807
1808                         cdm->pos.cookie.bus = periph->path->bus;
1809                         cdm->pos.generations[CAM_BUS_GENERATION]=
1810                                 xsoftc.bus_generation;
1811                         cdm->pos.cookie.target = periph->path->target;
1812                         cdm->pos.generations[CAM_TARGET_GENERATION] =
1813                                 periph->path->bus->generation;
1814                         cdm->pos.cookie.device = periph->path->device;
1815                         cdm->pos.generations[CAM_DEV_GENERATION] =
1816                                 periph->path->target->generation;
1817                         cdm->pos.cookie.periph = periph;
1818                         cdm->pos.generations[CAM_PERIPH_GENERATION] =
1819                                 periph->path->device->generation;
1820                         cdm->status = CAM_DEV_MATCH_MORE;
1821                         return(0);
1822                 }
1823
1824                 j = cdm->num_matches;
1825                 cdm->num_matches++;
1826                 cdm->matches[j].type = DEV_MATCH_PERIPH;
1827                 cdm->matches[j].result.periph_result.path_id =
1828                         periph->path->bus->path_id;
1829                 cdm->matches[j].result.periph_result.target_id =
1830                         periph->path->target->target_id;
1831                 cdm->matches[j].result.periph_result.target_lun =
1832                         periph->path->device->lun_id;
1833                 cdm->matches[j].result.periph_result.unit_number =
1834                         periph->unit_number;
1835                 strncpy(cdm->matches[j].result.periph_result.periph_name,
1836                         periph->periph_name, DEV_IDLEN);
1837         }
1838
1839         return(1);
1840 }
1841
1842 static int
1843 xptedtmatch(struct ccb_dev_match *cdm)
1844 {
1845         struct cam_eb *bus;
1846         int ret;
1847
1848         cdm->num_matches = 0;
1849
1850         /*
1851          * Check the bus list generation.  If it has changed, the user
1852          * needs to reset everything and start over.
1853          */
1854         xpt_lock_buses();
1855         if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1856          && (cdm->pos.cookie.bus != NULL)) {
1857                 if (cdm->pos.generations[CAM_BUS_GENERATION] !=
1858                     xsoftc.bus_generation) {
1859                         xpt_unlock_buses();
1860                         cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1861                         return(0);
1862                 }
1863                 bus = (struct cam_eb *)cdm->pos.cookie.bus;
1864                 bus->refcount++;
1865         } else
1866                 bus = NULL;
1867         xpt_unlock_buses();
1868
1869         ret = xptbustraverse(bus, xptedtbusfunc, cdm);
1870
1871         /*
1872          * If we get back 0, that means that we had to stop before fully
1873          * traversing the EDT.  It also means that one of the subroutines
1874          * has set the status field to the proper value.  If we get back 1,
1875          * we've fully traversed the EDT and copied out any matching entries.
1876          */
1877         if (ret == 1)
1878                 cdm->status = CAM_DEV_MATCH_LAST;
1879
1880         return(ret);
1881 }
1882
1883 static int
1884 xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
1885 {
1886         struct cam_periph *periph;
1887         struct ccb_dev_match *cdm;
1888
1889         cdm = (struct ccb_dev_match *)arg;
1890
1891         xpt_lock_buses();
1892         if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
1893          && (cdm->pos.cookie.pdrv == pdrv)
1894          && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1895          && (cdm->pos.cookie.periph != NULL)) {
1896                 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1897                     (*pdrv)->generation) {
1898                         xpt_unlock_buses();
1899                         cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1900                         return(0);
1901                 }
1902                 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1903                 periph->refcount++;
1904         } else
1905                 periph = NULL;
1906         xpt_unlock_buses();
1907
1908         return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
1909 }
1910
1911 static int
1912 xptplistperiphfunc(struct cam_periph *periph, void *arg)
1913 {
1914         struct ccb_dev_match *cdm;
1915         dev_match_ret retval;
1916
1917         cdm = (struct ccb_dev_match *)arg;
1918
1919         retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1920
1921         if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1922                 cdm->status = CAM_DEV_MATCH_ERROR;
1923                 return(0);
1924         }
1925
1926         /*
1927          * If the copy flag is set, copy this peripheral out.
1928          */
1929         if (retval & DM_RET_COPY) {
1930                 int spaceleft, j;
1931
1932                 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1933                         sizeof(struct dev_match_result));
1934
1935                 /*
1936                  * If we don't have enough space to put in another
1937                  * match result, save our position and tell the
1938                  * user there are more devices to check.
1939                  */
1940                 if (spaceleft < sizeof(struct dev_match_result)) {
1941                         struct periph_driver **pdrv;
1942
1943                         pdrv = NULL;
1944                         bzero(&cdm->pos, sizeof(cdm->pos));
1945                         cdm->pos.position_type =
1946                                 CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
1947                                 CAM_DEV_POS_PERIPH;
1948
1949                         /*
1950                          * This may look a bit non-sensical, but it is
1951                          * actually quite logical.  There are very few
1952                          * peripheral drivers, and bloating every peripheral
1953                          * structure with a pointer back to its parent
1954                          * peripheral driver linker set entry would cost
1955                          * more in the long run than doing this quick lookup.
1956                          */
1957                         for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
1958                                 if (strcmp((*pdrv)->driver_name,
1959                                     periph->periph_name) == 0)
1960                                         break;
1961                         }
1962
1963                         if (*pdrv == NULL) {
1964                                 cdm->status = CAM_DEV_MATCH_ERROR;
1965                                 return(0);
1966                         }
1967
1968                         cdm->pos.cookie.pdrv = pdrv;
1969                         /*
1970                          * The periph generation slot does double duty, as
1971                          * does the periph pointer slot.  They are used for
1972                          * both edt and pdrv lookups and positioning.
1973                          */
1974                         cdm->pos.cookie.periph = periph;
1975                         cdm->pos.generations[CAM_PERIPH_GENERATION] =
1976                                 (*pdrv)->generation;
1977                         cdm->status = CAM_DEV_MATCH_MORE;
1978                         return(0);
1979                 }
1980
1981                 j = cdm->num_matches;
1982                 cdm->num_matches++;
1983                 cdm->matches[j].type = DEV_MATCH_PERIPH;
1984                 cdm->matches[j].result.periph_result.path_id =
1985                         periph->path->bus->path_id;
1986
1987                 /*
1988                  * The transport layer peripheral doesn't have a target or
1989                  * lun.
1990                  */
1991                 if (periph->path->target)
1992                         cdm->matches[j].result.periph_result.target_id =
1993                                 periph->path->target->target_id;
1994                 else
1995                         cdm->matches[j].result.periph_result.target_id =
1996                                 CAM_TARGET_WILDCARD;
1997
1998                 if (periph->path->device)
1999                         cdm->matches[j].result.periph_result.target_lun =
2000                                 periph->path->device->lun_id;
2001                 else
2002                         cdm->matches[j].result.periph_result.target_lun =
2003                                 CAM_LUN_WILDCARD;
2004
2005                 cdm->matches[j].result.periph_result.unit_number =
2006                         periph->unit_number;
2007                 strncpy(cdm->matches[j].result.periph_result.periph_name,
2008                         periph->periph_name, DEV_IDLEN);
2009         }
2010
2011         return(1);
2012 }
2013
2014 static int
2015 xptperiphlistmatch(struct ccb_dev_match *cdm)
2016 {
2017         int ret;
2018
2019         cdm->num_matches = 0;
2020
2021         /*
2022          * At this point in the edt traversal function, we check the bus
2023          * list generation to make sure that no busses have been added or
2024          * removed since the user last sent a XPT_DEV_MATCH ccb through.
2025          * For the peripheral driver list traversal function, however, we
2026          * don't have to worry about new peripheral driver types coming or
2027          * going; they're in a linker set, and therefore can't change
2028          * without a recompile.
2029          */
2030
2031         if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2032          && (cdm->pos.cookie.pdrv != NULL))
2033                 ret = xptpdrvtraverse(
2034                                 (struct periph_driver **)cdm->pos.cookie.pdrv,
2035                                 xptplistpdrvfunc, cdm);
2036         else
2037                 ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
2038
2039         /*
2040          * If we get back 0, that means that we had to stop before fully
2041          * traversing the peripheral driver tree.  It also means that one of
2042          * the subroutines has set the status field to the proper value.  If
2043          * we get back 1, we've fully traversed the EDT and copied out any
2044          * matching entries.
2045          */
2046         if (ret == 1)
2047                 cdm->status = CAM_DEV_MATCH_LAST;
2048
2049         return(ret);
2050 }
2051
2052 static int
2053 xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
2054 {
2055         struct cam_eb *bus, *next_bus;
2056         int retval;
2057
2058         retval = 1;
2059         if (start_bus)
2060                 bus = start_bus;
2061         else {
2062                 xpt_lock_buses();
2063                 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
2064                 if (bus == NULL) {
2065                         xpt_unlock_buses();
2066                         return (retval);
2067                 }
2068                 bus->refcount++;
2069                 xpt_unlock_buses();
2070         }
2071         for (; bus != NULL; bus = next_bus) {
2072                 retval = tr_func(bus, arg);
2073                 if (retval == 0) {
2074                         xpt_release_bus(bus);
2075                         break;
2076                 }
2077                 xpt_lock_buses();
2078                 next_bus = TAILQ_NEXT(bus, links);
2079                 if (next_bus)
2080                         next_bus->refcount++;
2081                 xpt_unlock_buses();
2082                 xpt_release_bus(bus);
2083         }
2084         return(retval);
2085 }
2086
2087 static int
2088 xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
2089                   xpt_targetfunc_t *tr_func, void *arg)
2090 {
2091         struct cam_et *target, *next_target;
2092         int retval;
2093
2094         retval = 1;
2095         if (start_target)
2096                 target = start_target;
2097         else {
2098                 mtx_lock(&bus->eb_mtx);
2099                 target = TAILQ_FIRST(&bus->et_entries);
2100                 if (target == NULL) {
2101                         mtx_unlock(&bus->eb_mtx);
2102                         return (retval);
2103                 }
2104                 target->refcount++;
2105                 mtx_unlock(&bus->eb_mtx);
2106         }
2107         for (; target != NULL; target = next_target) {
2108                 retval = tr_func(target, arg);
2109                 if (retval == 0) {
2110                         xpt_release_target(target);
2111                         break;
2112                 }
2113                 mtx_lock(&bus->eb_mtx);
2114                 next_target = TAILQ_NEXT(target, links);
2115                 if (next_target)
2116                         next_target->refcount++;
2117                 mtx_unlock(&bus->eb_mtx);
2118                 xpt_release_target(target);
2119         }
2120         return(retval);
2121 }
2122
2123 static int
2124 xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
2125                   xpt_devicefunc_t *tr_func, void *arg)
2126 {
2127         struct cam_eb *bus;
2128         struct cam_ed *device, *next_device;
2129         int retval;
2130
2131         retval = 1;
2132         bus = target->bus;
2133         if (start_device)
2134                 device = start_device;
2135         else {
2136                 mtx_lock(&bus->eb_mtx);
2137                 device = TAILQ_FIRST(&target->ed_entries);
2138                 if (device == NULL) {
2139                         mtx_unlock(&bus->eb_mtx);
2140                         return (retval);
2141                 }
2142                 device->refcount++;
2143                 mtx_unlock(&bus->eb_mtx);
2144         }
2145         for (; device != NULL; device = next_device) {
2146                 mtx_lock(&device->device_mtx);
2147                 retval = tr_func(device, arg);
2148                 mtx_unlock(&device->device_mtx);
2149                 if (retval == 0) {
2150                         xpt_release_device(device);
2151                         break;
2152                 }
2153                 mtx_lock(&bus->eb_mtx);
2154                 next_device = TAILQ_NEXT(device, links);
2155                 if (next_device)
2156                         next_device->refcount++;
2157                 mtx_unlock(&bus->eb_mtx);
2158                 xpt_release_device(device);
2159         }
2160         return(retval);
2161 }
2162
2163 static int
2164 xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
2165                   xpt_periphfunc_t *tr_func, void *arg)
2166 {
2167         struct cam_eb *bus;
2168         struct cam_periph *periph, *next_periph;
2169         int retval;
2170
2171         retval = 1;
2172
2173         bus = device->target->bus;
2174         if (start_periph)
2175                 periph = start_periph;
2176         else {
2177                 xpt_lock_buses();
2178                 mtx_lock(&bus->eb_mtx);
2179                 periph = SLIST_FIRST(&device->periphs);
2180                 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2181                         periph = SLIST_NEXT(periph, periph_links);
2182                 if (periph == NULL) {
2183                         mtx_unlock(&bus->eb_mtx);
2184                         xpt_unlock_buses();
2185                         return (retval);
2186                 }
2187                 periph->refcount++;
2188                 mtx_unlock(&bus->eb_mtx);
2189                 xpt_unlock_buses();
2190         }
2191         for (; periph != NULL; periph = next_periph) {
2192                 retval = tr_func(periph, arg);
2193                 if (retval == 0) {
2194                         cam_periph_release_locked(periph);
2195                         break;
2196                 }
2197                 xpt_lock_buses();
2198                 mtx_lock(&bus->eb_mtx);
2199                 next_periph = SLIST_NEXT(periph, periph_links);
2200                 while (next_periph != NULL &&
2201                     (next_periph->flags & CAM_PERIPH_FREE) != 0)
2202                         next_periph = SLIST_NEXT(periph, periph_links);
2203                 if (next_periph)
2204                         next_periph->refcount++;
2205                 mtx_unlock(&bus->eb_mtx);
2206                 xpt_unlock_buses();
2207                 cam_periph_release_locked(periph);
2208         }
2209         return(retval);
2210 }
2211
2212 static int
2213 xptpdrvtraverse(struct periph_driver **start_pdrv,
2214                 xpt_pdrvfunc_t *tr_func, void *arg)
2215 {
2216         struct periph_driver **pdrv;
2217         int retval;
2218
2219         retval = 1;
2220
2221         /*
2222          * We don't traverse the peripheral driver list like we do the
2223          * other lists, because it is a linker set, and therefore cannot be
2224          * changed during runtime.  If the peripheral driver list is ever
2225          * re-done to be something other than a linker set (i.e. it can
2226          * change while the system is running), the list traversal should
2227          * be modified to work like the other traversal functions.
2228          */
2229         for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
2230              *pdrv != NULL; pdrv++) {
2231                 retval = tr_func(pdrv, arg);
2232
2233                 if (retval == 0)
2234                         return(retval);
2235         }
2236
2237         return(retval);
2238 }
2239
2240 static int
2241 xptpdperiphtraverse(struct periph_driver **pdrv,
2242                     struct cam_periph *start_periph,
2243                     xpt_periphfunc_t *tr_func, void *arg)
2244 {
2245         struct cam_periph *periph, *next_periph;
2246         int retval;
2247
2248         retval = 1;
2249
2250         if (start_periph)
2251                 periph = start_periph;
2252         else {
2253                 xpt_lock_buses();
2254                 periph = TAILQ_FIRST(&(*pdrv)->units);
2255                 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2256                         periph = TAILQ_NEXT(periph, unit_links);
2257                 if (periph == NULL) {
2258                         xpt_unlock_buses();
2259                         return (retval);
2260                 }
2261                 periph->refcount++;
2262                 xpt_unlock_buses();
2263         }
2264         for (; periph != NULL; periph = next_periph) {
2265                 cam_periph_lock(periph);
2266                 retval = tr_func(periph, arg);
2267                 cam_periph_unlock(periph);
2268                 if (retval == 0) {
2269                         cam_periph_release(periph);
2270                         break;
2271                 }
2272                 xpt_lock_buses();
2273                 next_periph = TAILQ_NEXT(periph, unit_links);
2274                 while (next_periph != NULL &&
2275                     (next_periph->flags & CAM_PERIPH_FREE) != 0)
2276                         next_periph = TAILQ_NEXT(periph, unit_links);
2277                 if (next_periph)
2278                         next_periph->refcount++;
2279                 xpt_unlock_buses();
2280                 cam_periph_release(periph);
2281         }
2282         return(retval);
2283 }
2284
2285 static int
2286 xptdefbusfunc(struct cam_eb *bus, void *arg)
2287 {
2288         struct xpt_traverse_config *tr_config;
2289
2290         tr_config = (struct xpt_traverse_config *)arg;
2291
2292         if (tr_config->depth == XPT_DEPTH_BUS) {
2293                 xpt_busfunc_t *tr_func;
2294
2295                 tr_func = (xpt_busfunc_t *)tr_config->tr_func;
2296
2297                 return(tr_func(bus, tr_config->tr_arg));
2298         } else
2299                 return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
2300 }
2301
2302 static int
2303 xptdeftargetfunc(struct cam_et *target, void *arg)
2304 {
2305         struct xpt_traverse_config *tr_config;
2306
2307         tr_config = (struct xpt_traverse_config *)arg;
2308
2309         if (tr_config->depth == XPT_DEPTH_TARGET) {
2310                 xpt_targetfunc_t *tr_func;
2311
2312                 tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
2313
2314                 return(tr_func(target, tr_config->tr_arg));
2315         } else
2316                 return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
2317 }
2318
2319 static int
2320 xptdefdevicefunc(struct cam_ed *device, void *arg)
2321 {
2322         struct xpt_traverse_config *tr_config;
2323
2324         tr_config = (struct xpt_traverse_config *)arg;
2325
2326         if (tr_config->depth == XPT_DEPTH_DEVICE) {
2327                 xpt_devicefunc_t *tr_func;
2328
2329                 tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
2330
2331                 return(tr_func(device, tr_config->tr_arg));
2332         } else
2333                 return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
2334 }
2335
2336 static int
2337 xptdefperiphfunc(struct cam_periph *periph, void *arg)
2338 {
2339         struct xpt_traverse_config *tr_config;
2340         xpt_periphfunc_t *tr_func;
2341
2342         tr_config = (struct xpt_traverse_config *)arg;
2343
2344         tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
2345
2346         /*
2347          * Unlike the other default functions, we don't check for depth
2348          * here.  The peripheral driver level is the last level in the EDT,
2349          * so if we're here, we should execute the function in question.
2350          */
2351         return(tr_func(periph, tr_config->tr_arg));
2352 }
2353
2354 /*
2355  * Execute the given function for every bus in the EDT.
2356  */
2357 static int
2358 xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
2359 {
2360         struct xpt_traverse_config tr_config;
2361
2362         tr_config.depth = XPT_DEPTH_BUS;
2363         tr_config.tr_func = tr_func;
2364         tr_config.tr_arg = arg;
2365
2366         return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2367 }
2368
2369 /*
2370  * Execute the given function for every device in the EDT.
2371  */
2372 static int
2373 xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
2374 {
2375         struct xpt_traverse_config tr_config;
2376
2377         tr_config.depth = XPT_DEPTH_DEVICE;
2378         tr_config.tr_func = tr_func;
2379         tr_config.tr_arg = arg;
2380
2381         return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2382 }
2383
2384 static int
2385 xptsetasyncfunc(struct cam_ed *device, void *arg)
2386 {
2387         struct cam_path path;
2388         struct ccb_getdev cgd;
2389         struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2390
2391         /*
2392          * Don't report unconfigured devices (Wildcard devs,
2393          * devices only for target mode, device instances
2394          * that have been invalidated but are waiting for
2395          * their last reference count to be released).
2396          */
2397         if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
2398                 return (1);
2399
2400         xpt_compile_path(&path,
2401                          NULL,
2402                          device->target->bus->path_id,
2403                          device->target->target_id,
2404                          device->lun_id);
2405         xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
2406         cgd.ccb_h.func_code = XPT_GDEV_TYPE;
2407         xpt_action((union ccb *)&cgd);
2408         csa->callback(csa->callback_arg,
2409                             AC_FOUND_DEVICE,
2410                             &path, &cgd);
2411         xpt_release_path(&path);
2412
2413         return(1);
2414 }
2415
2416 static int
2417 xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
2418 {
2419         struct cam_path path;
2420         struct ccb_pathinq cpi;
2421         struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2422
2423         xpt_compile_path(&path, /*periph*/NULL,
2424                          bus->path_id,
2425                          CAM_TARGET_WILDCARD,
2426                          CAM_LUN_WILDCARD);
2427         xpt_path_lock(&path);
2428         xpt_setup_ccb(&cpi.ccb_h, &path, CAM_PRIORITY_NORMAL);
2429         cpi.ccb_h.func_code = XPT_PATH_INQ;
2430         xpt_action((union ccb *)&cpi);
2431         csa->callback(csa->callback_arg,
2432                             AC_PATH_REGISTERED,
2433                             &path, &cpi);
2434         xpt_path_unlock(&path);
2435         xpt_release_path(&path);
2436
2437         return(1);
2438 }
2439
2440 void
2441 xpt_action(union ccb *start_ccb)
2442 {
2443
2444         CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_action\n"));
2445
2446         start_ccb->ccb_h.status = CAM_REQ_INPROG;
2447         (*(start_ccb->ccb_h.path->bus->xport->action))(start_ccb);
2448 }
2449
2450 void
2451 xpt_action_default(union ccb *start_ccb)
2452 {
2453         struct cam_path *path;
2454         struct cam_sim *sim;
2455         int lock;
2456
2457         path = start_ccb->ccb_h.path;
2458         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_action_default\n"));
2459
2460         switch (start_ccb->ccb_h.func_code) {
2461         case XPT_SCSI_IO:
2462         {
2463                 struct cam_ed *device;
2464
2465                 /*
2466                  * For the sake of compatibility with SCSI-1
2467                  * devices that may not understand the identify
2468                  * message, we include lun information in the
2469                  * second byte of all commands.  SCSI-1 specifies
2470                  * that luns are a 3 bit value and reserves only 3
2471                  * bits for lun information in the CDB.  Later
2472                  * revisions of the SCSI spec allow for more than 8
2473                  * luns, but have deprecated lun information in the
2474                  * CDB.  So, if the lun won't fit, we must omit.
2475                  *
2476                  * Also be aware that during initial probing for devices,
2477                  * the inquiry information is unknown but initialized to 0.
2478                  * This means that this code will be exercised while probing
2479                  * devices with an ANSI revision greater than 2.
2480                  */
2481                 device = path->device;
2482                 if (device->protocol_version <= SCSI_REV_2
2483                  && start_ccb->ccb_h.target_lun < 8
2484                  && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
2485
2486                         start_ccb->csio.cdb_io.cdb_bytes[1] |=
2487                             start_ccb->ccb_h.target_lun << 5;
2488                 }
2489                 start_ccb->csio.scsi_status = SCSI_STATUS_OK;
2490         }
2491         /* FALLTHROUGH */
2492         case XPT_TARGET_IO:
2493         case XPT_CONT_TARGET_IO:
2494                 start_ccb->csio.sense_resid = 0;
2495                 start_ccb->csio.resid = 0;
2496                 /* FALLTHROUGH */
2497         case XPT_ATA_IO:
2498                 if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
2499                         start_ccb->ataio.resid = 0;
2500                 /* FALLTHROUGH */
2501         case XPT_RESET_DEV:
2502         case XPT_ENG_EXEC:
2503         case XPT_SMP_IO:
2504         {
2505                 struct cam_devq *devq;
2506
2507                 devq = path->bus->sim->devq;
2508                 mtx_lock(&devq->send_mtx);
2509                 cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
2510                 if (xpt_schedule_devq(devq, path->device) != 0)
2511                         xpt_run_devq(devq);
2512                 mtx_unlock(&devq->send_mtx);
2513                 break;
2514         }
2515         case XPT_CALC_GEOMETRY:
2516                 /* Filter out garbage */
2517                 if (start_ccb->ccg.block_size == 0
2518                  || start_ccb->ccg.volume_size == 0) {
2519                         start_ccb->ccg.cylinders = 0;
2520                         start_ccb->ccg.heads = 0;
2521                         start_ccb->ccg.secs_per_track = 0;
2522                         start_ccb->ccb_h.status = CAM_REQ_CMP;
2523                         break;
2524                 }
2525 #if defined(PC98) || defined(__sparc64__)
2526                 /*
2527                  * In a PC-98 system, geometry translation depens on
2528                  * the "real" device geometry obtained from mode page 4.
2529                  * SCSI geometry translation is performed in the
2530                  * initialization routine of the SCSI BIOS and the result
2531                  * stored in host memory.  If the translation is available
2532                  * in host memory, use it.  If not, rely on the default
2533                  * translation the device driver performs.
2534                  * For sparc64, we may need adjust the geometry of large
2535                  * disks in order to fit the limitations of the 16-bit
2536                  * fields of the VTOC8 disk label.
2537                  */
2538                 if (scsi_da_bios_params(&start_ccb->ccg) != 0) {
2539                         start_ccb->ccb_h.status = CAM_REQ_CMP;
2540                         break;
2541                 }
2542 #endif
2543                 goto call_sim;
2544         case XPT_ABORT:
2545         {
2546                 union ccb* abort_ccb;
2547
2548                 abort_ccb = start_ccb->cab.abort_ccb;
2549                 if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
2550
2551                         if (abort_ccb->ccb_h.pinfo.index >= 0) {
2552                                 struct cam_ccbq *ccbq;
2553                                 struct cam_ed *device;
2554
2555                                 device = abort_ccb->ccb_h.path->device;
2556                                 ccbq = &device->ccbq;
2557                                 cam_ccbq_remove_ccb(ccbq, abort_ccb);
2558                                 abort_ccb->ccb_h.status =
2559                                     CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2560                                 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2561                                 xpt_done(abort_ccb);
2562                                 start_ccb->ccb_h.status = CAM_REQ_CMP;
2563                                 break;
2564                         }
2565                         if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
2566                          && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
2567                                 /*
2568                                  * We've caught this ccb en route to
2569                                  * the SIM.  Flag it for abort and the
2570                                  * SIM will do so just before starting
2571                                  * real work on the CCB.
2572                                  */
2573                                 abort_ccb->ccb_h.status =
2574                                     CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2575                                 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2576                                 start_ccb->ccb_h.status = CAM_REQ_CMP;
2577                                 break;
2578                         }
2579                 }
2580                 if (XPT_FC_IS_QUEUED(abort_ccb)
2581                  && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
2582                         /*
2583                          * It's already completed but waiting
2584                          * for our SWI to get to it.
2585                          */
2586                         start_ccb->ccb_h.status = CAM_UA_ABORT;
2587                         break;
2588                 }
2589                 /*
2590                  * If we weren't able to take care of the abort request
2591                  * in the XPT, pass the request down to the SIM for processing.
2592                  */
2593         }
2594         /* FALLTHROUGH */
2595         case XPT_ACCEPT_TARGET_IO:
2596         case XPT_EN_LUN:
2597         case XPT_IMMED_NOTIFY:
2598         case XPT_NOTIFY_ACK:
2599         case XPT_RESET_BUS:
2600         case XPT_IMMEDIATE_NOTIFY:
2601         case XPT_NOTIFY_ACKNOWLEDGE:
2602         case XPT_GET_SIM_KNOB:
2603         case XPT_SET_SIM_KNOB:
2604         case XPT_GET_TRAN_SETTINGS:
2605         case XPT_SET_TRAN_SETTINGS:
2606         case XPT_PATH_INQ:
2607 call_sim:
2608                 sim = path->bus->sim;
2609                 lock = (mtx_owned(sim->mtx) == 0);
2610                 if (lock)
2611                         CAM_SIM_LOCK(sim);
2612                 (*(sim->sim_action))(sim, start_ccb);
2613                 if (lock)
2614                         CAM_SIM_UNLOCK(sim);
2615                 break;
2616         case XPT_PATH_STATS:
2617                 start_ccb->cpis.last_reset = path->bus->last_reset;
2618                 start_ccb->ccb_h.status = CAM_REQ_CMP;
2619                 break;
2620         case XPT_GDEV_TYPE:
2621         {
2622                 struct cam_ed *dev;
2623
2624                 dev = path->device;
2625                 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2626                         start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2627                 } else {
2628                         struct ccb_getdev *cgd;
2629
2630                         cgd = &start_ccb->cgd;
2631                         cgd->protocol = dev->protocol;
2632                         cgd->inq_data = dev->inq_data;
2633                         cgd->ident_data = dev->ident_data;
2634                         cgd->inq_flags = dev->inq_flags;
2635                         cgd->ccb_h.status = CAM_REQ_CMP;
2636                         cgd->serial_num_len = dev->serial_num_len;
2637                         if ((dev->serial_num_len > 0)
2638                          && (dev->serial_num != NULL))
2639                                 bcopy(dev->serial_num, cgd->serial_num,
2640                                       dev->serial_num_len);
2641                 }
2642                 break;
2643         }
2644         case XPT_GDEV_STATS:
2645         {
2646                 struct cam_ed *dev;
2647
2648                 dev = path->device;
2649                 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2650                         start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2651                 } else {
2652                         struct ccb_getdevstats *cgds;
2653                         struct cam_eb *bus;
2654                         struct cam_et *tar;
2655
2656                         cgds = &start_ccb->cgds;
2657                         bus = path->bus;
2658                         tar = path->target;
2659                         cgds->dev_openings = dev->ccbq.dev_openings;
2660                         cgds->dev_active = dev->ccbq.dev_active;
2661                         cgds->devq_openings = dev->ccbq.devq_openings;
2662                         cgds->devq_queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
2663                         cgds->held = dev->ccbq.held;
2664                         cgds->last_reset = tar->last_reset;
2665                         cgds->maxtags = dev->maxtags;
2666                         cgds->mintags = dev->mintags;
2667                         if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
2668                                 cgds->last_reset = bus->last_reset;
2669                         cgds->ccb_h.status = CAM_REQ_CMP;
2670                 }
2671                 break;
2672         }
2673         case XPT_GDEVLIST:
2674         {
2675                 struct cam_periph       *nperiph;
2676                 struct periph_list      *periph_head;
2677                 struct ccb_getdevlist   *cgdl;
2678                 u_int                   i;
2679                 struct cam_ed           *device;
2680                 int                     found;
2681
2682
2683                 found = 0;
2684
2685                 /*
2686                  * Don't want anyone mucking with our data.
2687                  */
2688                 device = path->device;
2689                 periph_head = &device->periphs;
2690                 cgdl = &start_ccb->cgdl;
2691
2692                 /*
2693                  * Check and see if the list has changed since the user
2694                  * last requested a list member.  If so, tell them that the
2695                  * list has changed, and therefore they need to start over
2696                  * from the beginning.
2697                  */
2698                 if ((cgdl->index != 0) &&
2699                     (cgdl->generation != device->generation)) {
2700                         cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
2701                         break;
2702                 }
2703
2704                 /*
2705                  * Traverse the list of peripherals and attempt to find
2706                  * the requested peripheral.
2707                  */
2708                 for (nperiph = SLIST_FIRST(periph_head), i = 0;
2709                      (nperiph != NULL) && (i <= cgdl->index);
2710                      nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
2711                         if (i == cgdl->index) {
2712                                 strncpy(cgdl->periph_name,
2713                                         nperiph->periph_name,
2714                                         DEV_IDLEN);
2715                                 cgdl->unit_number = nperiph->unit_number;
2716                                 found = 1;
2717                         }
2718                 }
2719                 if (found == 0) {
2720                         cgdl->status = CAM_GDEVLIST_ERROR;
2721                         break;
2722                 }
2723
2724                 if (nperiph == NULL)
2725                         cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
2726                 else
2727                         cgdl->status = CAM_GDEVLIST_MORE_DEVS;
2728
2729                 cgdl->index++;
2730                 cgdl->generation = device->generation;
2731
2732                 cgdl->ccb_h.status = CAM_REQ_CMP;
2733                 break;
2734         }
2735         case XPT_DEV_MATCH:
2736         {
2737                 dev_pos_type position_type;
2738                 struct ccb_dev_match *cdm;
2739
2740                 cdm = &start_ccb->cdm;
2741
2742                 /*
2743                  * There are two ways of getting at information in the EDT.
2744                  * The first way is via the primary EDT tree.  It starts
2745                  * with a list of busses, then a list of targets on a bus,
2746                  * then devices/luns on a target, and then peripherals on a
2747                  * device/lun.  The "other" way is by the peripheral driver
2748                  * lists.  The peripheral driver lists are organized by
2749                  * peripheral driver.  (obviously)  So it makes sense to
2750                  * use the peripheral driver list if the user is looking
2751                  * for something like "da1", or all "da" devices.  If the
2752                  * user is looking for something on a particular bus/target
2753                  * or lun, it's generally better to go through the EDT tree.
2754                  */
2755
2756                 if (cdm->pos.position_type != CAM_DEV_POS_NONE)
2757                         position_type = cdm->pos.position_type;
2758                 else {
2759                         u_int i;
2760
2761                         position_type = CAM_DEV_POS_NONE;
2762
2763                         for (i = 0; i < cdm->num_patterns; i++) {
2764                                 if ((cdm->patterns[i].type == DEV_MATCH_BUS)
2765                                  ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
2766                                         position_type = CAM_DEV_POS_EDT;
2767                                         break;
2768                                 }
2769                         }
2770
2771                         if (cdm->num_patterns == 0)
2772                                 position_type = CAM_DEV_POS_EDT;
2773                         else if (position_type == CAM_DEV_POS_NONE)
2774                                 position_type = CAM_DEV_POS_PDRV;
2775                 }
2776
2777                 switch(position_type & CAM_DEV_POS_TYPEMASK) {
2778                 case CAM_DEV_POS_EDT:
2779                         xptedtmatch(cdm);
2780                         break;
2781                 case CAM_DEV_POS_PDRV:
2782                         xptperiphlistmatch(cdm);
2783                         break;
2784                 default:
2785                         cdm->status = CAM_DEV_MATCH_ERROR;
2786                         break;
2787                 }
2788
2789                 if (cdm->status == CAM_DEV_MATCH_ERROR)
2790                         start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2791                 else
2792                         start_ccb->ccb_h.status = CAM_REQ_CMP;
2793
2794                 break;
2795         }
2796         case XPT_SASYNC_CB:
2797         {
2798                 struct ccb_setasync *csa;
2799                 struct async_node *cur_entry;
2800                 struct async_list *async_head;
2801                 u_int32_t added;
2802
2803                 csa = &start_ccb->csa;
2804                 added = csa->event_enable;
2805                 async_head = &path->device->asyncs;
2806
2807                 /*
2808                  * If there is already an entry for us, simply
2809                  * update it.
2810                  */
2811                 cur_entry = SLIST_FIRST(async_head);
2812                 while (cur_entry != NULL) {
2813                         if ((cur_entry->callback_arg == csa->callback_arg)
2814                          && (cur_entry->callback == csa->callback))
2815                                 break;
2816                         cur_entry = SLIST_NEXT(cur_entry, links);
2817                 }
2818
2819                 if (cur_entry != NULL) {
2820                         /*
2821                          * If the request has no flags set,
2822                          * remove the entry.
2823                          */
2824                         added &= ~cur_entry->event_enable;
2825                         if (csa->event_enable == 0) {
2826                                 SLIST_REMOVE(async_head, cur_entry,
2827                                              async_node, links);
2828                                 xpt_release_device(path->device);
2829                                 free(cur_entry, M_CAMXPT);
2830                         } else {
2831                                 cur_entry->event_enable = csa->event_enable;
2832                         }
2833                         csa->event_enable = added;
2834                 } else {
2835                         cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
2836                                            M_NOWAIT);
2837                         if (cur_entry == NULL) {
2838                                 csa->ccb_h.status = CAM_RESRC_UNAVAIL;
2839                                 break;
2840                         }
2841                         cur_entry->event_enable = csa->event_enable;
2842                         cur_entry->event_lock =
2843                             mtx_owned(path->bus->sim->mtx) ? 1 : 0;
2844                         cur_entry->callback_arg = csa->callback_arg;
2845                         cur_entry->callback = csa->callback;
2846                         SLIST_INSERT_HEAD(async_head, cur_entry, links);
2847                         xpt_acquire_device(path->device);
2848                 }
2849                 start_ccb->ccb_h.status = CAM_REQ_CMP;
2850                 break;
2851         }
2852         case XPT_REL_SIMQ:
2853         {
2854                 struct ccb_relsim *crs;
2855                 struct cam_ed *dev;
2856
2857                 crs = &start_ccb->crs;
2858                 dev = path->device;
2859                 if (dev == NULL) {
2860
2861                         crs->ccb_h.status = CAM_DEV_NOT_THERE;
2862                         break;
2863                 }
2864
2865                 if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
2866
2867                         /* Don't ever go below one opening */
2868                         if (crs->openings > 0) {
2869                                 xpt_dev_ccbq_resize(path, crs->openings);
2870                                 if (bootverbose) {
2871                                         xpt_print(path,
2872                                             "number of openings is now %d\n",
2873                                             crs->openings);
2874                                 }
2875                         }
2876                 }
2877
2878                 mtx_lock(&dev->sim->devq->send_mtx);
2879                 if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
2880
2881                         if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
2882
2883                                 /*
2884                                  * Just extend the old timeout and decrement
2885                                  * the freeze count so that a single timeout
2886                                  * is sufficient for releasing the queue.
2887                                  */
2888                                 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2889                                 callout_stop(&dev->callout);
2890                         } else {
2891
2892                                 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2893                         }
2894
2895                         callout_reset(&dev->callout,
2896                             (crs->release_timeout * hz) / 1000,
2897                             xpt_release_devq_timeout, dev);
2898
2899                         dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
2900
2901                 }
2902
2903                 if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
2904
2905                         if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
2906                                 /*
2907                                  * Decrement the freeze count so that a single
2908                                  * completion is still sufficient to unfreeze
2909                                  * the queue.
2910                                  */
2911                                 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2912                         } else {
2913
2914                                 dev->flags |= CAM_DEV_REL_ON_COMPLETE;
2915                                 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2916                         }
2917                 }
2918
2919                 if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
2920
2921                         if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
2922                          || (dev->ccbq.dev_active == 0)) {
2923
2924                                 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2925                         } else {
2926
2927                                 dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
2928                                 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2929                         }
2930                 }
2931                 mtx_unlock(&dev->sim->devq->send_mtx);
2932
2933                 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
2934                         xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
2935                 start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
2936                 start_ccb->ccb_h.status = CAM_REQ_CMP;
2937                 break;
2938         }
2939         case XPT_DEBUG: {
2940                 struct cam_path *oldpath;
2941
2942                 /* Check that all request bits are supported. */
2943                 if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
2944                         start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
2945                         break;
2946                 }
2947
2948                 cam_dflags = CAM_DEBUG_NONE;
2949                 if (cam_dpath != NULL) {
2950                         oldpath = cam_dpath;
2951                         cam_dpath = NULL;
2952                         xpt_free_path(oldpath);
2953                 }
2954                 if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
2955                         if (xpt_create_path(&cam_dpath, NULL,
2956                                             start_ccb->ccb_h.path_id,
2957                                             start_ccb->ccb_h.target_id,
2958                                             start_ccb->ccb_h.target_lun) !=
2959                                             CAM_REQ_CMP) {
2960                                 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
2961                         } else {
2962                                 cam_dflags = start_ccb->cdbg.flags;
2963                                 start_ccb->ccb_h.status = CAM_REQ_CMP;
2964                                 xpt_print(cam_dpath, "debugging flags now %x\n",
2965                                     cam_dflags);
2966                         }
2967                 } else
2968                         start_ccb->ccb_h.status = CAM_REQ_CMP;
2969                 break;
2970         }
2971         case XPT_NOOP:
2972                 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
2973                         xpt_freeze_devq(path, 1);
2974                 start_ccb->ccb_h.status = CAM_REQ_CMP;
2975                 break;
2976         default:
2977         case XPT_SDEV_TYPE:
2978         case XPT_TERM_IO:
2979         case XPT_ENG_INQ:
2980                 /* XXX Implement */
2981                 printf("%s: CCB type %#x not supported\n", __func__,
2982                        start_ccb->ccb_h.func_code);
2983                 start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
2984                 if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
2985                         xpt_done(start_ccb);
2986                 }
2987                 break;
2988         }
2989 }
2990
2991 void
2992 xpt_polled_action(union ccb *start_ccb)
2993 {
2994         u_int32_t timeout;
2995         struct    cam_sim *sim;
2996         struct    cam_devq *devq;
2997         struct    cam_ed *dev;
2998
2999         timeout = start_ccb->ccb_h.timeout * 10;
3000         sim = start_ccb->ccb_h.path->bus->sim;
3001         devq = sim->devq;
3002         dev = start_ccb->ccb_h.path->device;
3003
3004         mtx_unlock(&dev->device_mtx);
3005
3006         /*
3007          * Steal an opening so that no other queued requests
3008          * can get it before us while we simulate interrupts.
3009          */
3010         mtx_lock(&devq->send_mtx);
3011         dev->ccbq.devq_openings--;
3012         dev->ccbq.dev_openings--;
3013         while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
3014             (--timeout > 0)) {
3015                 mtx_unlock(&devq->send_mtx);
3016                 DELAY(100);
3017                 CAM_SIM_LOCK(sim);
3018                 (*(sim->sim_poll))(sim);
3019                 CAM_SIM_UNLOCK(sim);
3020                 camisr_runqueue();
3021                 mtx_lock(&devq->send_mtx);
3022         }
3023         dev->ccbq.devq_openings++;
3024         dev->ccbq.dev_openings++;
3025         mtx_unlock(&devq->send_mtx);
3026
3027         if (timeout != 0) {
3028                 xpt_action(start_ccb);
3029                 while(--timeout > 0) {
3030                         CAM_SIM_LOCK(sim);
3031                         (*(sim->sim_poll))(sim);
3032                         CAM_SIM_UNLOCK(sim);
3033                         camisr_runqueue();
3034                         if ((start_ccb->ccb_h.status  & CAM_STATUS_MASK)
3035                             != CAM_REQ_INPROG)
3036                                 break;
3037                         DELAY(100);
3038                 }
3039                 if (timeout == 0) {
3040                         /*
3041                          * XXX Is it worth adding a sim_timeout entry
3042                          * point so we can attempt recovery?  If
3043                          * this is only used for dumps, I don't think
3044                          * it is.
3045                          */
3046                         start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3047                 }
3048         } else {
3049                 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3050         }
3051
3052         mtx_lock(&dev->device_mtx);
3053 }
3054
3055 /*
3056  * Schedule a peripheral driver to receive a ccb when it's
3057  * target device has space for more transactions.
3058  */
3059 void
3060 xpt_schedule(struct cam_periph *periph, u_int32_t new_priority)
3061 {
3062
3063         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
3064         cam_periph_assert(periph, MA_OWNED);
3065         if (new_priority < periph->scheduled_priority) {
3066                 periph->scheduled_priority = new_priority;
3067                 xpt_run_allocq(periph, 0);
3068         }
3069 }
3070
3071
3072 /*
3073  * Schedule a device to run on a given queue.
3074  * If the device was inserted as a new entry on the queue,
3075  * return 1 meaning the device queue should be run. If we
3076  * were already queued, implying someone else has already
3077  * started the queue, return 0 so the caller doesn't attempt
3078  * to run the queue.
3079  */
3080 static int
3081 xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
3082                  u_int32_t new_priority)
3083 {
3084         int retval;
3085         u_int32_t old_priority;
3086
3087         CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
3088
3089         old_priority = pinfo->priority;
3090
3091         /*
3092          * Are we already queued?
3093          */
3094         if (pinfo->index != CAM_UNQUEUED_INDEX) {
3095                 /* Simply reorder based on new priority */
3096                 if (new_priority < old_priority) {
3097                         camq_change_priority(queue, pinfo->index,
3098                                              new_priority);
3099                         CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3100                                         ("changed priority to %d\n",
3101                                          new_priority));
3102                         retval = 1;
3103                 } else
3104                         retval = 0;
3105         } else {
3106                 /* New entry on the queue */
3107                 if (new_priority < old_priority)
3108                         pinfo->priority = new_priority;
3109
3110                 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3111                                 ("Inserting onto queue\n"));
3112                 pinfo->generation = ++queue->generation;
3113                 camq_insert(queue, pinfo);
3114                 retval = 1;
3115         }
3116         return (retval);
3117 }
3118
3119 static void
3120 xpt_run_allocq_task(void *context, int pending)
3121 {
3122         struct cam_periph *periph = context;
3123
3124         cam_periph_lock(periph);
3125         periph->flags &= ~CAM_PERIPH_RUN_TASK;
3126         xpt_run_allocq(periph, 1);
3127         cam_periph_unlock(periph);
3128         cam_periph_release(periph);
3129 }
3130
3131 static void
3132 xpt_run_allocq(struct cam_periph *periph, int sleep)
3133 {
3134         struct cam_ed   *device;
3135         union ccb       *ccb;
3136         uint32_t         prio;
3137
3138         cam_periph_assert(periph, MA_OWNED);
3139         if (periph->periph_allocating)
3140                 return;
3141         periph->periph_allocating = 1;
3142         CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
3143         device = periph->path->device;
3144         ccb = NULL;
3145 restart:
3146         while ((prio = min(periph->scheduled_priority,
3147             periph->immediate_priority)) != CAM_PRIORITY_NONE &&
3148             (periph->periph_allocated - (ccb != NULL ? 1 : 0) <
3149              device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
3150
3151                 if (ccb == NULL &&
3152                     (ccb = xpt_get_ccb_nowait(periph)) == NULL) {
3153                         if (sleep) {
3154                                 ccb = xpt_get_ccb(periph);
3155                                 goto restart;
3156                         }
3157                         if (periph->flags & CAM_PERIPH_RUN_TASK)
3158                                 break;
3159                         cam_periph_doacquire(periph);
3160                         periph->flags |= CAM_PERIPH_RUN_TASK;
3161                         taskqueue_enqueue(xsoftc.xpt_taskq,
3162                             &periph->periph_run_task);
3163                         break;
3164                 }
3165                 xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
3166                 if (prio == periph->immediate_priority) {
3167                         periph->immediate_priority = CAM_PRIORITY_NONE;
3168                         CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3169                                         ("waking cam_periph_getccb()\n"));
3170                         SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
3171                                           periph_links.sle);
3172                         wakeup(&periph->ccb_list);
3173                 } else {
3174                         periph->scheduled_priority = CAM_PRIORITY_NONE;
3175                         CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3176                                         ("calling periph_start()\n"));
3177                         periph->periph_start(periph, ccb);
3178                 }
3179                 ccb = NULL;
3180         }
3181         if (ccb != NULL)
3182                 xpt_release_ccb(ccb);
3183         periph->periph_allocating = 0;
3184 }
3185
3186 static void
3187 xpt_run_devq(struct cam_devq *devq)
3188 {
3189         char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
3190         int lock;
3191
3192         CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
3193
3194         devq->send_queue.qfrozen_cnt++;
3195         while ((devq->send_queue.entries > 0)
3196             && (devq->send_openings > 0)
3197             && (devq->send_queue.qfrozen_cnt <= 1)) {
3198                 struct  cam_ed *device;
3199                 union ccb *work_ccb;
3200                 struct  cam_sim *sim;
3201
3202                 device = (struct cam_ed *)camq_remove(&devq->send_queue,
3203                                                            CAMQ_HEAD);
3204                 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3205                                 ("running device %p\n", device));
3206
3207                 work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
3208                 if (work_ccb == NULL) {
3209                         printf("device on run queue with no ccbs???\n");
3210                         continue;
3211                 }
3212
3213                 if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
3214
3215                         mtx_lock(&xsoftc.xpt_highpower_lock);
3216                         if (xsoftc.num_highpower <= 0) {
3217                                 /*
3218                                  * We got a high power command, but we
3219                                  * don't have any available slots.  Freeze
3220                                  * the device queue until we have a slot
3221                                  * available.
3222                                  */
3223                                 xpt_freeze_devq_device(device, 1);
3224                                 STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
3225                                                    highpowerq_entry);
3226
3227                                 mtx_unlock(&xsoftc.xpt_highpower_lock);
3228                                 continue;
3229                         } else {
3230                                 /*
3231                                  * Consume a high power slot while
3232                                  * this ccb runs.
3233                                  */
3234                                 xsoftc.num_highpower--;
3235                         }
3236                         mtx_unlock(&xsoftc.xpt_highpower_lock);
3237                 }
3238                 cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
3239                 cam_ccbq_send_ccb(&device->ccbq, work_ccb);
3240                 devq->send_openings--;
3241                 devq->send_active++;
3242                 xpt_schedule_devq(devq, device);
3243                 mtx_unlock(&devq->send_mtx);
3244
3245                 if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
3246                         /*
3247                          * The client wants to freeze the queue
3248                          * after this CCB is sent.
3249                          */
3250                         xpt_freeze_devq(work_ccb->ccb_h.path, 1);
3251                 }
3252
3253                 /* In Target mode, the peripheral driver knows best... */
3254                 if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
3255                         if ((device->inq_flags & SID_CmdQue) != 0
3256                          && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
3257                                 work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
3258                         else
3259                                 /*
3260                                  * Clear this in case of a retried CCB that
3261                                  * failed due to a rejected tag.
3262                                  */
3263                                 work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
3264                 }
3265
3266                 switch (work_ccb->ccb_h.func_code) {
3267                 case XPT_SCSI_IO:
3268                         CAM_DEBUG(work_ccb->ccb_h.path,
3269                             CAM_DEBUG_CDB,("%s. CDB: %s\n",
3270                              scsi_op_desc(work_ccb->csio.cdb_io.cdb_bytes[0],
3271                                           &device->inq_data),
3272                              scsi_cdb_string(work_ccb->csio.cdb_io.cdb_bytes,
3273                                              cdb_str, sizeof(cdb_str))));
3274                         break;
3275                 case XPT_ATA_IO:
3276                         CAM_DEBUG(work_ccb->ccb_h.path,
3277                             CAM_DEBUG_CDB,("%s. ACB: %s\n",
3278                              ata_op_string(&work_ccb->ataio.cmd),
3279                              ata_cmd_string(&work_ccb->ataio.cmd,
3280                                             cdb_str, sizeof(cdb_str))));
3281                         break;
3282                 default:
3283                         break;
3284                 }
3285
3286                 /*
3287                  * Device queues can be shared among multiple SIM instances
3288                  * that reside on different busses.  Use the SIM from the
3289                  * queued device, rather than the one from the calling bus.
3290                  */
3291                 sim = device->sim;
3292                 lock = (mtx_owned(sim->mtx) == 0);
3293                 if (lock)
3294                         CAM_SIM_LOCK(sim);
3295                 (*(sim->sim_action))(sim, work_ccb);
3296                 if (lock)
3297                         CAM_SIM_UNLOCK(sim);
3298                 mtx_lock(&devq->send_mtx);
3299         }
3300         devq->send_queue.qfrozen_cnt--;
3301 }
3302
3303 /*
3304  * This function merges stuff from the slave ccb into the master ccb, while
3305  * keeping important fields in the master ccb constant.
3306  */
3307 void
3308 xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb)
3309 {
3310
3311         /*
3312          * Pull fields that are valid for peripheral drivers to set
3313          * into the master CCB along with the CCB "payload".
3314          */
3315         master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count;
3316         master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code;
3317         master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout;
3318         master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags;
3319         bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1],
3320               sizeof(union ccb) - sizeof(struct ccb_hdr));
3321 }
3322
3323 void
3324 xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority)
3325 {
3326
3327         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
3328         ccb_h->pinfo.priority = priority;
3329         ccb_h->path = path;
3330         ccb_h->path_id = path->bus->path_id;
3331         if (path->target)
3332                 ccb_h->target_id = path->target->target_id;
3333         else
3334                 ccb_h->target_id = CAM_TARGET_WILDCARD;
3335         if (path->device) {
3336                 ccb_h->target_lun = path->device->lun_id;
3337                 ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
3338         } else {
3339                 ccb_h->target_lun = CAM_TARGET_WILDCARD;
3340         }
3341         ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
3342         ccb_h->flags = 0;
3343         ccb_h->xflags = 0;
3344 }
3345
3346 /* Path manipulation functions */
3347 cam_status
3348 xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
3349                 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3350 {
3351         struct     cam_path *path;
3352         cam_status status;
3353
3354         path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3355
3356         if (path == NULL) {
3357                 status = CAM_RESRC_UNAVAIL;
3358                 return(status);
3359         }
3360         status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
3361         if (status != CAM_REQ_CMP) {
3362                 free(path, M_CAMPATH);
3363                 path = NULL;
3364         }
3365         *new_path_ptr = path;
3366         return (status);
3367 }
3368
3369 cam_status
3370 xpt_create_path_unlocked(struct cam_path **new_path_ptr,
3371                          struct cam_periph *periph, path_id_t path_id,
3372                          target_id_t target_id, lun_id_t lun_id)
3373 {
3374
3375         return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
3376             lun_id));
3377 }
3378
3379 cam_status
3380 xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
3381                  path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3382 {
3383         struct       cam_eb *bus;
3384         struct       cam_et *target;
3385         struct       cam_ed *device;
3386         cam_status   status;
3387
3388         status = CAM_REQ_CMP;   /* Completed without error */
3389         target = NULL;          /* Wildcarded */
3390         device = NULL;          /* Wildcarded */
3391
3392         /*
3393          * We will potentially modify the EDT, so block interrupts
3394          * that may attempt to create cam paths.
3395          */
3396         bus = xpt_find_bus(path_id);
3397         if (bus == NULL) {
3398                 status = CAM_PATH_INVALID;
3399         } else {
3400                 xpt_lock_buses();
3401                 mtx_lock(&bus->eb_mtx);
3402                 target = xpt_find_target(bus, target_id);
3403                 if (target == NULL) {
3404                         /* Create one */
3405                         struct cam_et *new_target;
3406
3407                         new_target = xpt_alloc_target(bus, target_id);
3408                         if (new_target == NULL) {
3409                                 status = CAM_RESRC_UNAVAIL;
3410                         } else {
3411                                 target = new_target;
3412                         }
3413                 }
3414                 xpt_unlock_buses();
3415                 if (target != NULL) {
3416                         device = xpt_find_device(target, lun_id);
3417                         if (device == NULL) {
3418                                 /* Create one */
3419                                 struct cam_ed *new_device;
3420
3421                                 new_device =
3422                                     (*(bus->xport->alloc_device))(bus,
3423                                                                       target,
3424                                                                       lun_id);
3425                                 if (new_device == NULL) {
3426                                         status = CAM_RESRC_UNAVAIL;
3427                                 } else {
3428                                         device = new_device;
3429                                 }
3430                         }
3431                 }
3432                 mtx_unlock(&bus->eb_mtx);
3433         }
3434
3435         /*
3436          * Only touch the user's data if we are successful.
3437          */
3438         if (status == CAM_REQ_CMP) {
3439                 new_path->periph = perph;
3440                 new_path->bus = bus;
3441                 new_path->target = target;
3442                 new_path->device = device;
3443                 CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
3444         } else {
3445                 if (device != NULL)
3446                         xpt_release_device(device);
3447                 if (target != NULL)
3448                         xpt_release_target(target);
3449                 if (bus != NULL)
3450                         xpt_release_bus(bus);
3451         }
3452         return (status);
3453 }
3454
3455 cam_status
3456 xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
3457 {
3458         struct     cam_path *new_path;
3459
3460         new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3461         if (new_path == NULL)
3462                 return(CAM_RESRC_UNAVAIL);
3463         xpt_copy_path(new_path, path);
3464         *new_path_ptr = new_path;
3465         return (CAM_REQ_CMP);
3466 }
3467
3468 void
3469 xpt_copy_path(struct cam_path *new_path, struct cam_path *path)
3470 {
3471
3472         *new_path = *path;
3473         if (path->bus != NULL)
3474                 xpt_acquire_bus(path->bus);
3475         if (path->target != NULL)
3476                 xpt_acquire_target(path->target);
3477         if (path->device != NULL)
3478                 xpt_acquire_device(path->device);
3479 }
3480
3481 void
3482 xpt_release_path(struct cam_path *path)
3483 {
3484         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
3485         if (path->device != NULL) {
3486                 xpt_release_device(path->device);
3487                 path->device = NULL;
3488         }
3489         if (path->target != NULL) {
3490                 xpt_release_target(path->target);
3491                 path->target = NULL;
3492         }
3493         if (path->bus != NULL) {
3494                 xpt_release_bus(path->bus);
3495                 path->bus = NULL;
3496         }
3497 }
3498
3499 void
3500 xpt_free_path(struct cam_path *path)
3501 {
3502
3503         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
3504         xpt_release_path(path);
3505         free(path, M_CAMPATH);
3506 }
3507
3508 void
3509 xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
3510     uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
3511 {
3512
3513         xpt_lock_buses();
3514         if (bus_ref) {
3515                 if (path->bus)
3516                         *bus_ref = path->bus->refcount;
3517                 else
3518                         *bus_ref = 0;
3519         }
3520         if (periph_ref) {
3521                 if (path->periph)
3522                         *periph_ref = path->periph->refcount;
3523                 else
3524                         *periph_ref = 0;
3525         }
3526         xpt_unlock_buses();
3527         if (target_ref) {
3528                 if (path->target)
3529                         *target_ref = path->target->refcount;
3530                 else
3531                         *target_ref = 0;
3532         }
3533         if (device_ref) {
3534                 if (path->device)
3535                         *device_ref = path->device->refcount;
3536                 else
3537                         *device_ref = 0;
3538         }
3539 }
3540
3541 /*
3542  * Return -1 for failure, 0 for exact match, 1 for match with wildcards
3543  * in path1, 2 for match with wildcards in path2.
3544  */
3545 int
3546 xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
3547 {
3548         int retval = 0;
3549
3550         if (path1->bus != path2->bus) {
3551                 if (path1->bus->path_id == CAM_BUS_WILDCARD)
3552                         retval = 1;
3553                 else if (path2->bus->path_id == CAM_BUS_WILDCARD)
3554                         retval = 2;
3555                 else
3556                         return (-1);
3557         }
3558         if (path1->target != path2->target) {
3559                 if (path1->target->target_id == CAM_TARGET_WILDCARD) {
3560                         if (retval == 0)
3561                                 retval = 1;
3562                 } else if (path2->target->target_id == CAM_TARGET_WILDCARD)
3563                         retval = 2;
3564                 else
3565                         return (-1);
3566         }
3567         if (path1->device != path2->device) {
3568                 if (path1->device->lun_id == CAM_LUN_WILDCARD) {
3569                         if (retval == 0)
3570                                 retval = 1;
3571                 } else if (path2->device->lun_id == CAM_LUN_WILDCARD)
3572                         retval = 2;
3573                 else
3574                         return (-1);
3575         }
3576         return (retval);
3577 }
3578
3579 int
3580 xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
3581 {
3582         int retval = 0;
3583
3584         if (path->bus != dev->target->bus) {
3585                 if (path->bus->path_id == CAM_BUS_WILDCARD)
3586                         retval = 1;
3587                 else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
3588                         retval = 2;
3589                 else
3590                         return (-1);
3591         }
3592         if (path->target != dev->target) {
3593                 if (path->target->target_id == CAM_TARGET_WILDCARD) {
3594                         if (retval == 0)
3595                                 retval = 1;
3596                 } else if (dev->target->target_id == CAM_TARGET_WILDCARD)
3597                         retval = 2;
3598                 else
3599                         return (-1);
3600         }
3601         if (path->device != dev) {
3602                 if (path->device->lun_id == CAM_LUN_WILDCARD) {
3603                         if (retval == 0)
3604                                 retval = 1;
3605                 } else if (dev->lun_id == CAM_LUN_WILDCARD)
3606                         retval = 2;
3607                 else
3608                         return (-1);
3609         }
3610         return (retval);
3611 }
3612
3613 void
3614 xpt_print_path(struct cam_path *path)
3615 {
3616
3617         if (path == NULL)
3618                 printf("(nopath): ");
3619         else {
3620                 if (path->periph != NULL)
3621                         printf("(%s%d:", path->periph->periph_name,
3622                                path->periph->unit_number);
3623                 else
3624                         printf("(noperiph:");
3625
3626                 if (path->bus != NULL)
3627                         printf("%s%d:%d:", path->bus->sim->sim_name,
3628                                path->bus->sim->unit_number,
3629                                path->bus->sim->bus_id);
3630                 else
3631                         printf("nobus:");
3632
3633                 if (path->target != NULL)
3634                         printf("%d:", path->target->target_id);
3635                 else
3636                         printf("X:");
3637
3638                 if (path->device != NULL)
3639                         printf("%jx): ", (uintmax_t)path->device->lun_id);
3640                 else
3641                         printf("X): ");
3642         }
3643 }
3644
3645 void
3646 xpt_print_device(struct cam_ed *device)
3647 {
3648
3649         if (device == NULL)
3650                 printf("(nopath): ");
3651         else {
3652                 printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
3653                        device->sim->unit_number,
3654                        device->sim->bus_id,
3655                        device->target->target_id,
3656                        (uintmax_t)device->lun_id);
3657         }
3658 }
3659
3660 void
3661 xpt_print(struct cam_path *path, const char *fmt, ...)
3662 {
3663         va_list ap;
3664         xpt_print_path(path);
3665         va_start(ap, fmt);
3666         vprintf(fmt, ap);
3667         va_end(ap);
3668 }
3669
3670 int
3671 xpt_path_string(struct cam_path *path, char *str, size_t str_len)
3672 {
3673         struct sbuf sb;
3674
3675         sbuf_new(&sb, str, str_len, 0);
3676
3677         if (path == NULL)
3678                 sbuf_printf(&sb, "(nopath): ");
3679         else {
3680                 if (path->periph != NULL)
3681                         sbuf_printf(&sb, "(%s%d:", path->periph->periph_name,
3682                                     path->periph->unit_number);
3683                 else
3684                         sbuf_printf(&sb, "(noperiph:");
3685
3686                 if (path->bus != NULL)
3687                         sbuf_printf(&sb, "%s%d:%d:", path->bus->sim->sim_name,
3688                                     path->bus->sim->unit_number,
3689                                     path->bus->sim->bus_id);
3690                 else
3691                         sbuf_printf(&sb, "nobus:");
3692
3693                 if (path->target != NULL)
3694                         sbuf_printf(&sb, "%d:", path->target->target_id);
3695                 else
3696                         sbuf_printf(&sb, "X:");
3697
3698                 if (path->device != NULL)
3699                         sbuf_printf(&sb, "%jx): ",
3700                             (uintmax_t)path->device->lun_id);
3701                 else
3702                         sbuf_printf(&sb, "X): ");
3703         }
3704         sbuf_finish(&sb);
3705
3706         return(sbuf_len(&sb));
3707 }
3708
3709 path_id_t
3710 xpt_path_path_id(struct cam_path *path)
3711 {
3712         return(path->bus->path_id);
3713 }
3714
3715 target_id_t
3716 xpt_path_target_id(struct cam_path *path)
3717 {
3718         if (path->target != NULL)
3719                 return (path->target->target_id);
3720         else
3721                 return (CAM_TARGET_WILDCARD);
3722 }
3723
3724 lun_id_t
3725 xpt_path_lun_id(struct cam_path *path)
3726 {
3727         if (path->device != NULL)
3728                 return (path->device->lun_id);
3729         else
3730                 return (CAM_LUN_WILDCARD);
3731 }
3732
3733 struct cam_sim *
3734 xpt_path_sim(struct cam_path *path)
3735 {
3736
3737         return (path->bus->sim);
3738 }
3739
3740 struct cam_periph*
3741 xpt_path_periph(struct cam_path *path)
3742 {
3743
3744         return (path->periph);
3745 }
3746
3747 int
3748 xpt_path_legacy_ata_id(struct cam_path *path)
3749 {
3750         struct cam_eb *bus;
3751         int bus_id;
3752
3753         if ((strcmp(path->bus->sim->sim_name, "ata") != 0) &&
3754             strcmp(path->bus->sim->sim_name, "ahcich") != 0 &&
3755             strcmp(path->bus->sim->sim_name, "mvsch") != 0 &&
3756             strcmp(path->bus->sim->sim_name, "siisch") != 0)
3757                 return (-1);
3758
3759         if (strcmp(path->bus->sim->sim_name, "ata") == 0 &&
3760             path->bus->sim->unit_number < 2) {
3761                 bus_id = path->bus->sim->unit_number;
3762         } else {
3763                 bus_id = 2;
3764                 xpt_lock_buses();
3765                 TAILQ_FOREACH(bus, &xsoftc.xpt_busses, links) {
3766                         if (bus == path->bus)
3767                                 break;
3768                         if ((strcmp(bus->sim->sim_name, "ata") == 0 &&
3769                              bus->sim->unit_number >= 2) ||
3770                             strcmp(bus->sim->sim_name, "ahcich") == 0 ||
3771                             strcmp(bus->sim->sim_name, "mvsch") == 0 ||
3772                             strcmp(bus->sim->sim_name, "siisch") == 0)
3773                                 bus_id++;
3774                 }
3775                 xpt_unlock_buses();
3776         }
3777         if (path->target != NULL) {
3778                 if (path->target->target_id < 2)
3779                         return (bus_id * 2 + path->target->target_id);
3780                 else
3781                         return (-1);
3782         } else
3783                 return (bus_id * 2);
3784 }
3785
3786 /*
3787  * Release a CAM control block for the caller.  Remit the cost of the structure
3788  * to the device referenced by the path.  If the this device had no 'credits'
3789  * and peripheral drivers have registered async callbacks for this notification
3790  * call them now.
3791  */
3792 void
3793 xpt_release_ccb(union ccb *free_ccb)
3794 {
3795         struct   cam_ed *device;
3796         struct   cam_periph *periph;
3797
3798         CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
3799         xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
3800         device = free_ccb->ccb_h.path->device;
3801         periph = free_ccb->ccb_h.path->periph;
3802
3803         xpt_free_ccb(free_ccb);
3804         periph->periph_allocated--;
3805         cam_ccbq_release_opening(&device->ccbq);
3806         xpt_run_allocq(periph, 0);
3807 }
3808
3809 /* Functions accessed by SIM drivers */
3810
3811 static struct xpt_xport xport_default = {
3812         .alloc_device = xpt_alloc_device_default,
3813         .action = xpt_action_default,
3814         .async = xpt_dev_async_default,
3815 };
3816
3817 /*
3818  * A sim structure, listing the SIM entry points and instance
3819  * identification info is passed to xpt_bus_register to hook the SIM
3820  * into the CAM framework.  xpt_bus_register creates a cam_eb entry
3821  * for this new bus and places it in the array of busses and assigns
3822  * it a path_id.  The path_id may be influenced by "hard wiring"
3823  * information specified by the user.  Once interrupt services are
3824  * available, the bus will be probed.
3825  */
3826 int32_t
3827 xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus)
3828 {
3829         struct cam_eb *new_bus;
3830         struct cam_eb *old_bus;
3831         struct ccb_pathinq cpi;
3832         struct cam_path *path;
3833         cam_status status;
3834
3835         mtx_assert(sim->mtx, MA_OWNED);
3836
3837         sim->bus_id = bus;
3838         new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
3839                                           M_CAMXPT, M_NOWAIT|M_ZERO);
3840         if (new_bus == NULL) {
3841                 /* Couldn't satisfy request */
3842                 return (CAM_RESRC_UNAVAIL);
3843         }
3844
3845         mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
3846         TAILQ_INIT(&new_bus->et_entries);
3847         cam_sim_hold(sim);
3848         new_bus->sim = sim;
3849         timevalclear(&new_bus->last_reset);
3850         new_bus->flags = 0;
3851         new_bus->refcount = 1;  /* Held until a bus_deregister event */
3852         new_bus->generation = 0;
3853
3854         xpt_lock_buses();
3855         sim->path_id = new_bus->path_id =
3856             xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
3857         old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3858         while (old_bus != NULL
3859             && old_bus->path_id < new_bus->path_id)
3860                 old_bus = TAILQ_NEXT(old_bus, links);
3861         if (old_bus != NULL)
3862                 TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
3863         else
3864                 TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
3865         xsoftc.bus_generation++;
3866         xpt_unlock_buses();
3867
3868         /*
3869          * Set a default transport so that a PATH_INQ can be issued to
3870          * the SIM.  This will then allow for probing and attaching of
3871          * a more appropriate transport.
3872          */
3873         new_bus->xport = &xport_default;
3874
3875         status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
3876                                   CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3877         if (status != CAM_REQ_CMP) {
3878                 xpt_release_bus(new_bus);
3879                 free(path, M_CAMXPT);
3880                 return (CAM_RESRC_UNAVAIL);
3881         }
3882
3883         xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NORMAL);
3884         cpi.ccb_h.func_code = XPT_PATH_INQ;
3885         xpt_action((union ccb *)&cpi);
3886
3887         if (cpi.ccb_h.status == CAM_REQ_CMP) {
3888                 switch (cpi.transport) {
3889                 case XPORT_SPI:
3890                 case XPORT_SAS:
3891                 case XPORT_FC:
3892                 case XPORT_USB:
3893                 case XPORT_ISCSI:
3894                 case XPORT_SRP:
3895                 case XPORT_PPB:
3896                         new_bus->xport = scsi_get_xport();
3897                         break;
3898                 case XPORT_ATA:
3899                 case XPORT_SATA:
3900                         new_bus->xport = ata_get_xport();
3901                         break;
3902                 default:
3903                         new_bus->xport = &xport_default;
3904                         break;
3905                 }
3906         }
3907
3908         /* Notify interested parties */
3909         if (sim->path_id != CAM_XPT_PATH_ID) {
3910
3911                 xpt_async(AC_PATH_REGISTERED, path, &cpi);
3912                 if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
3913                         union   ccb *scan_ccb;
3914
3915                         /* Initiate bus rescan. */
3916                         scan_ccb = xpt_alloc_ccb_nowait();
3917                         if (scan_ccb != NULL) {
3918                                 scan_ccb->ccb_h.path = path;
3919                                 scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
3920                                 scan_ccb->crcn.flags = 0;
3921                                 xpt_rescan(scan_ccb);
3922                         } else {
3923                                 xpt_print(path,
3924                                           "Can't allocate CCB to scan bus\n");
3925                                 xpt_free_path(path);
3926                         }
3927                 } else
3928                         xpt_free_path(path);
3929         } else
3930                 xpt_free_path(path);
3931         return (CAM_SUCCESS);
3932 }
3933
3934 int32_t
3935 xpt_bus_deregister(path_id_t pathid)
3936 {
3937         struct cam_path bus_path;
3938         cam_status status;
3939
3940         status = xpt_compile_path(&bus_path, NULL, pathid,
3941                                   CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3942         if (status != CAM_REQ_CMP)
3943                 return (status);
3944
3945         xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
3946         xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
3947
3948         /* Release the reference count held while registered. */
3949         xpt_release_bus(bus_path.bus);
3950         xpt_release_path(&bus_path);
3951
3952         return (CAM_REQ_CMP);
3953 }
3954
3955 static path_id_t
3956 xptnextfreepathid(void)
3957 {
3958         struct cam_eb *bus;
3959         path_id_t pathid;
3960         const char *strval;
3961
3962         mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
3963         pathid = 0;
3964         bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3965 retry:
3966         /* Find an unoccupied pathid */
3967         while (bus != NULL && bus->path_id <= pathid) {
3968                 if (bus->path_id == pathid)
3969                         pathid++;
3970                 bus = TAILQ_NEXT(bus, links);
3971         }
3972
3973         /*
3974          * Ensure that this pathid is not reserved for
3975          * a bus that may be registered in the future.
3976          */
3977         if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
3978                 ++pathid;
3979                 /* Start the search over */
3980                 goto retry;
3981         }
3982         return (pathid);
3983 }
3984
3985 static path_id_t
3986 xptpathid(const char *sim_name, int sim_unit, int sim_bus)
3987 {
3988         path_id_t pathid;
3989         int i, dunit, val;
3990         char buf[32];
3991         const char *dname;
3992
3993         pathid = CAM_XPT_PATH_ID;
3994         snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
3995         if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
3996                 return (pathid);
3997         i = 0;
3998         while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
3999                 if (strcmp(dname, "scbus")) {
4000                         /* Avoid a bit of foot shooting. */
4001                         continue;
4002                 }
4003                 if (dunit < 0)          /* unwired?! */
4004                         continue;
4005                 if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
4006                         if (sim_bus == val) {
4007                                 pathid = dunit;
4008                                 break;
4009                         }
4010                 } else if (sim_bus == 0) {
4011                         /* Unspecified matches bus 0 */
4012                         pathid = dunit;
4013                         break;
4014                 } else {
4015                         printf("Ambiguous scbus configuration for %s%d "
4016                                "bus %d, cannot wire down.  The kernel "
4017                                "config entry for scbus%d should "
4018                                "specify a controller bus.\n"
4019                                "Scbus will be assigned dynamically.\n",
4020                                sim_name, sim_unit, sim_bus, dunit);
4021                         break;
4022                 }
4023         }
4024
4025         if (pathid == CAM_XPT_PATH_ID)
4026                 pathid = xptnextfreepathid();
4027         return (pathid);
4028 }
4029
4030 static const char *
4031 xpt_async_string(u_int32_t async_code)
4032 {
4033
4034         switch (async_code) {
4035         case AC_BUS_RESET: return ("AC_BUS_RESET");
4036         case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
4037         case AC_SCSI_AEN: return ("AC_SCSI_AEN");
4038         case AC_SENT_BDR: return ("AC_SENT_BDR");
4039         case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
4040         case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
4041         case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
4042         case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
4043         case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
4044         case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
4045         case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
4046         case AC_CONTRACT: return ("AC_CONTRACT");
4047         case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
4048         case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
4049         }
4050         return ("AC_UNKNOWN");
4051 }
4052
4053 static int
4054 xpt_async_size(u_int32_t async_code)
4055 {
4056
4057         switch (async_code) {
4058         case AC_BUS_RESET: return (0);
4059         case AC_UNSOL_RESEL: return (0);
4060         case AC_SCSI_AEN: return (0);
4061         case AC_SENT_BDR: return (0);
4062         case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
4063         case AC_PATH_DEREGISTERED: return (0);
4064         case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
4065         case AC_LOST_DEVICE: return (0);
4066         case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
4067         case AC_INQ_CHANGED: return (0);
4068         case AC_GETDEV_CHANGED: return (0);
4069         case AC_CONTRACT: return (sizeof(struct ac_contract));
4070         case AC_ADVINFO_CHANGED: return (-1);
4071         case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
4072         }
4073         return (0);
4074 }
4075
4076 static int
4077 xpt_async_process_dev(struct cam_ed *device, void *arg)
4078 {
4079         union ccb *ccb = arg;
4080         struct cam_path *path = ccb->ccb_h.path;
4081         void *async_arg = ccb->casync.async_arg_ptr;
4082         u_int32_t async_code = ccb->casync.async_code;
4083         int relock;
4084
4085         if (path->device != device
4086          && path->device->lun_id != CAM_LUN_WILDCARD
4087          && device->lun_id != CAM_LUN_WILDCARD)
4088                 return (1);
4089
4090         /*
4091          * The async callback could free the device.
4092          * If it is a broadcast async, it doesn't hold
4093          * device reference, so take our own reference.
4094          */
4095         xpt_acquire_device(device);
4096
4097         /*
4098          * If async for specific device is to be delivered to
4099          * the wildcard client, take the specific device lock.
4100          * XXX: We may need a way for client to specify it.
4101          */
4102         if ((device->lun_id == CAM_LUN_WILDCARD &&
4103              path->device->lun_id != CAM_LUN_WILDCARD) ||
4104             (device->target->target_id == CAM_TARGET_WILDCARD &&
4105              path->target->target_id != CAM_TARGET_WILDCARD) ||
4106             (device->target->bus->path_id == CAM_BUS_WILDCARD &&
4107              path->target->bus->path_id != CAM_BUS_WILDCARD)) {
4108                 mtx_unlock(&device->device_mtx);
4109                 xpt_path_lock(path);
4110                 relock = 1;
4111         } else
4112                 relock = 0;
4113
4114         (*(device->target->bus->xport->async))(async_code,
4115             device->target->bus, device->target, device, async_arg);
4116         xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
4117
4118         if (relock) {
4119                 xpt_path_unlock(path);
4120                 mtx_lock(&device->device_mtx);
4121         }
4122         xpt_release_device(device);
4123         return (1);
4124 }
4125
4126 static int
4127 xpt_async_process_tgt(struct cam_et *target, void *arg)
4128 {
4129         union ccb *ccb = arg;
4130         struct cam_path *path = ccb->ccb_h.path;
4131
4132         if (path->target != target
4133          && path->target->target_id != CAM_TARGET_WILDCARD
4134          && target->target_id != CAM_TARGET_WILDCARD)
4135                 return (1);
4136
4137         if (ccb->casync.async_code == AC_SENT_BDR) {
4138                 /* Update our notion of when the last reset occurred */
4139                 microtime(&target->last_reset);
4140         }
4141
4142         return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
4143 }
4144
4145 static void
4146 xpt_async_process(struct cam_periph *periph, union ccb *ccb)
4147 {
4148         struct cam_eb *bus;
4149         struct cam_path *path;
4150         void *async_arg;
4151         u_int32_t async_code;
4152
4153         path = ccb->ccb_h.path;
4154         async_code = ccb->casync.async_code;
4155         async_arg = ccb->casync.async_arg_ptr;
4156         CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
4157             ("xpt_async(%s)\n", xpt_async_string(async_code)));
4158         bus = path->bus;
4159
4160         if (async_code == AC_BUS_RESET) {
4161                 /* Update our notion of when the last reset occurred */
4162                 microtime(&bus->last_reset);
4163         }
4164
4165         xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
4166
4167         /*
4168          * If this wasn't a fully wildcarded async, tell all
4169          * clients that want all async events.
4170          */
4171         if (bus != xpt_periph->path->bus) {
4172                 xpt_path_lock(xpt_periph->path);
4173                 xpt_async_process_dev(xpt_periph->path->device, ccb);
4174                 xpt_path_unlock(xpt_periph->path);
4175         }
4176
4177         if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4178                 xpt_release_devq(path, 1, TRUE);
4179         else
4180                 xpt_release_simq(path->bus->sim, TRUE);
4181         if (ccb->casync.async_arg_size > 0)
4182                 free(async_arg, M_CAMXPT);
4183         xpt_free_path(path);
4184         xpt_free_ccb(ccb);
4185 }
4186
4187 static void
4188 xpt_async_bcast(struct async_list *async_head,
4189                 u_int32_t async_code,
4190                 struct cam_path *path, void *async_arg)
4191 {
4192         struct async_node *cur_entry;
4193         int lock;
4194
4195         cur_entry = SLIST_FIRST(async_head);
4196         while (cur_entry != NULL) {
4197                 struct async_node *next_entry;
4198                 /*
4199                  * Grab the next list entry before we call the current
4200                  * entry's callback.  This is because the callback function
4201                  * can delete its async callback entry.
4202                  */
4203                 next_entry = SLIST_NEXT(cur_entry, links);
4204                 if ((cur_entry->event_enable & async_code) != 0) {
4205                         lock = cur_entry->event_lock;
4206                         if (lock)
4207                                 CAM_SIM_LOCK(path->device->sim);
4208                         cur_entry->callback(cur_entry->callback_arg,
4209                                             async_code, path,
4210                                             async_arg);
4211                         if (lock)
4212                                 CAM_SIM_UNLOCK(path->device->sim);
4213                 }
4214                 cur_entry = next_entry;
4215         }
4216 }
4217
4218 void
4219 xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg)
4220 {
4221         union ccb *ccb;
4222         int size;
4223
4224         ccb = xpt_alloc_ccb_nowait();
4225         if (ccb == NULL) {
4226                 xpt_print(path, "Can't allocate CCB to send %s\n",
4227                     xpt_async_string(async_code));
4228                 return;
4229         }
4230
4231         if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) {
4232                 xpt_print(path, "Can't allocate path to send %s\n",
4233                     xpt_async_string(async_code));
4234                 xpt_free_ccb(ccb);
4235                 return;
4236         }
4237         ccb->ccb_h.path->periph = NULL;
4238         ccb->ccb_h.func_code = XPT_ASYNC;
4239         ccb->ccb_h.cbfcnp = xpt_async_process;
4240         ccb->ccb_h.flags |= CAM_UNLOCKED;
4241         ccb->casync.async_code = async_code;
4242         ccb->casync.async_arg_size = 0;
4243         size = xpt_async_size(async_code);
4244         if (size > 0 && async_arg != NULL) {
4245                 ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
4246                 if (ccb->casync.async_arg_ptr == NULL) {
4247                         xpt_print(path, "Can't allocate argument to send %s\n",
4248                             xpt_async_string(async_code));
4249                         xpt_free_path(ccb->ccb_h.path);
4250                         xpt_free_ccb(ccb);
4251                         return;
4252                 }
4253                 memcpy(ccb->casync.async_arg_ptr, async_arg, size);
4254                 ccb->casync.async_arg_size = size;
4255         } else if (size < 0)
4256                 ccb->casync.async_arg_size = size;
4257         if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4258                 xpt_freeze_devq(path, 1);
4259         else
4260                 xpt_freeze_simq(path->bus->sim, 1);
4261         xpt_done(ccb);
4262 }
4263
4264 static void
4265 xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus,
4266                       struct cam_et *target, struct cam_ed *device,
4267                       void *async_arg)
4268 {
4269
4270         /*
4271          * We only need to handle events for real devices.
4272          */
4273         if (target->target_id == CAM_TARGET_WILDCARD
4274          || device->lun_id == CAM_LUN_WILDCARD)
4275                 return;
4276
4277         printf("%s called\n", __func__);
4278 }
4279
4280 static uint32_t
4281 xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
4282 {
4283         struct cam_devq *devq;
4284         uint32_t freeze;
4285
4286         devq = dev->sim->devq;
4287         mtx_assert(&devq->send_mtx, MA_OWNED);
4288         CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4289             ("xpt_freeze_devq_device(%d) %u->%u\n", count,
4290             dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
4291         freeze = (dev->ccbq.queue.qfrozen_cnt += count);
4292         /* Remove frozen device from sendq. */
4293         if (device_is_queued(dev))
4294                 camq_remove(&devq->send_queue, dev->devq_entry.index);
4295         return (freeze);
4296 }
4297
4298 u_int32_t
4299 xpt_freeze_devq(struct cam_path *path, u_int count)
4300 {
4301         struct cam_ed   *dev = path->device;
4302         struct cam_devq *devq;
4303         uint32_t         freeze;
4304
4305         devq = dev->sim->devq;
4306         mtx_lock(&devq->send_mtx);
4307         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
4308         freeze = xpt_freeze_devq_device(dev, count);
4309         mtx_unlock(&devq->send_mtx);
4310         return (freeze);
4311 }
4312
4313 u_int32_t
4314 xpt_freeze_simq(struct cam_sim *sim, u_int count)
4315 {
4316         struct cam_devq *devq;
4317         uint32_t         freeze;
4318
4319         devq = sim->devq;
4320         mtx_lock(&devq->send_mtx);
4321         freeze = (devq->send_queue.qfrozen_cnt += count);
4322         mtx_unlock(&devq->send_mtx);
4323         return (freeze);
4324 }
4325
4326 static void
4327 xpt_release_devq_timeout(void *arg)
4328 {
4329         struct cam_ed *dev;
4330         struct cam_devq *devq;
4331
4332         dev = (struct cam_ed *)arg;
4333         CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
4334         devq = dev->sim->devq;
4335         mtx_assert(&devq->send_mtx, MA_OWNED);
4336         if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
4337                 xpt_run_devq(devq);
4338 }
4339
4340 void
4341 xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
4342 {
4343         struct cam_ed *dev;
4344         struct cam_devq *devq;
4345
4346         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
4347             count, run_queue));
4348         dev = path->device;
4349         devq = dev->sim->devq;
4350         mtx_lock(&devq->send_mtx);
4351         if (xpt_release_devq_device(dev, count, run_queue))
4352                 xpt_run_devq(dev->sim->devq);
4353         mtx_unlock(&devq->send_mtx);
4354 }
4355
4356 static int
4357 xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
4358 {
4359
4360         mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
4361         CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4362             ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
4363             dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
4364         if (count > dev->ccbq.queue.qfrozen_cnt) {
4365 #ifdef INVARIANTS
4366                 printf("xpt_release_devq(): requested %u > present %u\n",
4367                     count, dev->ccbq.queue.qfrozen_cnt);
4368 #endif
4369                 count = dev->ccbq.queue.qfrozen_cnt;
4370         }
4371         dev->ccbq.queue.qfrozen_cnt -= count;
4372         if (dev->ccbq.queue.qfrozen_cnt == 0) {
4373                 /*
4374                  * No longer need to wait for a successful
4375                  * command completion.
4376                  */
4377                 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
4378                 /*
4379                  * Remove any timeouts that might be scheduled
4380                  * to release this queue.
4381                  */
4382                 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
4383                         callout_stop(&dev->callout);
4384                         dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
4385                 }
4386                 /*
4387                  * Now that we are unfrozen schedule the
4388                  * device so any pending transactions are
4389                  * run.
4390                  */
4391                 xpt_schedule_devq(dev->sim->devq, dev);
4392         } else
4393                 run_queue = 0;
4394         return (run_queue);
4395 }
4396
4397 void
4398 xpt_release_simq(struct cam_sim *sim, int run_queue)
4399 {
4400         struct cam_devq *devq;
4401
4402         devq = sim->devq;
4403         mtx_lock(&devq->send_mtx);
4404         if (devq->send_queue.qfrozen_cnt <= 0) {
4405 #ifdef INVARIANTS
4406                 printf("xpt_release_simq: requested 1 > present %u\n",
4407                     devq->send_queue.qfrozen_cnt);
4408 #endif
4409         } else
4410                 devq->send_queue.qfrozen_cnt--;
4411         if (devq->send_queue.qfrozen_cnt == 0) {
4412                 /*
4413                  * If there is a timeout scheduled to release this
4414                  * sim queue, remove it.  The queue frozen count is
4415                  * already at 0.
4416                  */
4417                 if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){
4418                         callout_stop(&sim->callout);
4419                         sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING;
4420                 }
4421                 if (run_queue) {
4422                         /*
4423                          * Now that we are unfrozen run the send queue.
4424                          */
4425                         xpt_run_devq(sim->devq);
4426                 }
4427         }
4428         mtx_unlock(&devq->send_mtx);
4429 }
4430
4431 /*
4432  * XXX Appears to be unused.
4433  */
4434 static void
4435 xpt_release_simq_timeout(void *arg)
4436 {
4437         struct cam_sim *sim;
4438
4439         sim = (struct cam_sim *)arg;
4440         xpt_release_simq(sim, /* run_queue */ TRUE);
4441 }
4442
4443 void
4444 xpt_done(union ccb *done_ccb)
4445 {
4446         struct cam_doneq *queue;
4447         int     run, hash;
4448
4449         CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done\n"));
4450         if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4451                 return;
4452
4453         hash = (done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
4454             done_ccb->ccb_h.target_lun) % cam_num_doneqs;
4455         queue = &cam_doneqs[hash];
4456         mtx_lock(&queue->cam_doneq_mtx);
4457         run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
4458         STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
4459         done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
4460         mtx_unlock(&queue->cam_doneq_mtx);
4461         if (run)
4462                 wakeup(&queue->cam_doneq);
4463 }
4464
4465 void
4466 xpt_done_direct(union ccb *done_ccb)
4467 {
4468
4469         CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done_direct\n"));
4470         if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4471                 return;
4472
4473         xpt_done_process(&done_ccb->ccb_h);
4474 }
4475
4476 union ccb *
4477 xpt_alloc_ccb()
4478 {
4479         union ccb *new_ccb;
4480
4481         new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4482         return (new_ccb);
4483 }
4484
4485 union ccb *
4486 xpt_alloc_ccb_nowait()
4487 {
4488         union ccb *new_ccb;
4489
4490         new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4491         return (new_ccb);
4492 }
4493
4494 void
4495 xpt_free_ccb(union ccb *free_ccb)
4496 {
4497         free(free_ccb, M_CAMCCB);
4498 }
4499
4500
4501
4502 /* Private XPT functions */
4503
4504 /*
4505  * Get a CAM control block for the caller. Charge the structure to the device
4506  * referenced by the path.  If we don't have sufficient resources to allocate
4507  * more ccbs, we return NULL.
4508  */
4509 static union ccb *
4510 xpt_get_ccb_nowait(struct cam_periph *periph)
4511 {
4512         union ccb *new_ccb;
4513
4514         new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_NOWAIT);
4515         if (new_ccb == NULL)
4516                 return (NULL);
4517         periph->periph_allocated++;
4518         cam_ccbq_take_opening(&periph->path->device->ccbq);
4519         return (new_ccb);
4520 }
4521
4522 static union ccb *
4523 xpt_get_ccb(struct cam_periph *periph)
4524 {
4525         union ccb *new_ccb;
4526
4527         cam_periph_unlock(periph);
4528         new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_WAITOK);
4529         cam_periph_lock(periph);
4530         periph->periph_allocated++;
4531         cam_ccbq_take_opening(&periph->path->device->ccbq);
4532         return (new_ccb);
4533 }
4534
4535 union ccb *
4536 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
4537 {
4538         struct ccb_hdr *ccb_h;
4539
4540         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
4541         cam_periph_assert(periph, MA_OWNED);
4542         while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
4543             ccb_h->pinfo.priority != priority) {
4544                 if (priority < periph->immediate_priority) {
4545                         periph->immediate_priority = priority;
4546                         xpt_run_allocq(periph, 0);
4547                 } else
4548                         cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
4549                             "cgticb", 0);
4550         }
4551         SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
4552         return ((union ccb *)ccb_h);
4553 }
4554
4555 static void
4556 xpt_acquire_bus(struct cam_eb *bus)
4557 {
4558
4559         xpt_lock_buses();
4560         bus->refcount++;
4561         xpt_unlock_buses();
4562 }
4563
4564 static void
4565 xpt_release_bus(struct cam_eb *bus)
4566 {
4567
4568         xpt_lock_buses();
4569         KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
4570         if (--bus->refcount > 0) {
4571                 xpt_unlock_buses();
4572                 return;
4573         }
4574         TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
4575         xsoftc.bus_generation++;
4576         xpt_unlock_buses();
4577         KASSERT(TAILQ_EMPTY(&bus->et_entries),
4578             ("destroying bus, but target list is not empty"));
4579         cam_sim_release(bus->sim);
4580         mtx_destroy(&bus->eb_mtx);
4581         free(bus, M_CAMXPT);
4582 }
4583
4584 static struct cam_et *
4585 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
4586 {
4587         struct cam_et *cur_target, *target;
4588
4589         mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4590         mtx_assert(&bus->eb_mtx, MA_OWNED);
4591         target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
4592                                          M_NOWAIT|M_ZERO);
4593         if (target == NULL)
4594                 return (NULL);
4595
4596         TAILQ_INIT(&target->ed_entries);
4597         target->bus = bus;
4598         target->target_id = target_id;
4599         target->refcount = 1;
4600         target->generation = 0;
4601         target->luns = NULL;
4602         mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
4603         timevalclear(&target->last_reset);
4604         /*
4605          * Hold a reference to our parent bus so it
4606          * will not go away before we do.
4607          */
4608         bus->refcount++;
4609
4610         /* Insertion sort into our bus's target list */
4611         cur_target = TAILQ_FIRST(&bus->et_entries);
4612         while (cur_target != NULL && cur_target->target_id < target_id)
4613                 cur_target = TAILQ_NEXT(cur_target, links);
4614         if (cur_target != NULL) {
4615                 TAILQ_INSERT_BEFORE(cur_target, target, links);
4616         } else {
4617                 TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
4618         }
4619         bus->generation++;
4620         return (target);
4621 }
4622
4623 static void
4624 xpt_acquire_target(struct cam_et *target)
4625 {
4626         struct cam_eb *bus = target->bus;
4627
4628         mtx_lock(&bus->eb_mtx);
4629         target->refcount++;
4630         mtx_unlock(&bus->eb_mtx);
4631 }
4632
4633 static void
4634 xpt_release_target(struct cam_et *target)
4635 {
4636         struct cam_eb *bus = target->bus;
4637
4638         mtx_lock(&bus->eb_mtx);
4639         if (--target->refcount > 0) {
4640                 mtx_unlock(&bus->eb_mtx);
4641                 return;
4642         }
4643         TAILQ_REMOVE(&bus->et_entries, target, links);
4644         bus->generation++;
4645         mtx_unlock(&bus->eb_mtx);
4646         KASSERT(TAILQ_EMPTY(&target->ed_entries),
4647             ("destroying target, but device list is not empty"));
4648         xpt_release_bus(bus);
4649         mtx_destroy(&target->luns_mtx);
4650         if (target->luns)
4651                 free(target->luns, M_CAMXPT);
4652         free(target, M_CAMXPT);
4653 }
4654
4655 static struct cam_ed *
4656 xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
4657                          lun_id_t lun_id)
4658 {
4659         struct cam_ed *device;
4660
4661         device = xpt_alloc_device(bus, target, lun_id);
4662         if (device == NULL)
4663                 return (NULL);
4664
4665         device->mintags = 1;
4666         device->maxtags = 1;
4667         return (device);
4668 }
4669
4670 static void
4671 xpt_destroy_device(void *context, int pending)
4672 {
4673         struct cam_ed   *device = context;
4674
4675         mtx_lock(&device->device_mtx);
4676         mtx_destroy(&device->device_mtx);
4677         free(device, M_CAMDEV);
4678 }
4679
4680 struct cam_ed *
4681 xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
4682 {
4683         struct cam_ed   *cur_device, *device;
4684         struct cam_devq *devq;
4685         cam_status status;
4686
4687         mtx_assert(&bus->eb_mtx, MA_OWNED);
4688         /* Make space for us in the device queue on our bus */
4689         devq = bus->sim->devq;
4690         mtx_lock(&devq->send_mtx);
4691         status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
4692         mtx_unlock(&devq->send_mtx);
4693         if (status != CAM_REQ_CMP)
4694                 return (NULL);
4695
4696         device = (struct cam_ed *)malloc(sizeof(*device),
4697                                          M_CAMDEV, M_NOWAIT|M_ZERO);
4698         if (device == NULL)
4699                 return (NULL);
4700
4701         cam_init_pinfo(&device->devq_entry);
4702         device->target = target;
4703         device->lun_id = lun_id;
4704         device->sim = bus->sim;
4705         if (cam_ccbq_init(&device->ccbq,
4706                           bus->sim->max_dev_openings) != 0) {
4707                 free(device, M_CAMDEV);
4708                 return (NULL);
4709         }
4710         SLIST_INIT(&device->asyncs);
4711         SLIST_INIT(&device->periphs);
4712         device->generation = 0;
4713         device->flags = CAM_DEV_UNCONFIGURED;
4714         device->tag_delay_count = 0;
4715         device->tag_saved_openings = 0;
4716         device->refcount = 1;
4717         mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
4718         callout_init_mtx(&device->callout, &devq->send_mtx, 0);
4719         TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
4720         /*
4721          * Hold a reference to our parent bus so it
4722          * will not go away before we do.
4723          */
4724         target->refcount++;
4725
4726         cur_device = TAILQ_FIRST(&target->ed_entries);
4727         while (cur_device != NULL && cur_device->lun_id < lun_id)
4728                 cur_device = TAILQ_NEXT(cur_device, links);
4729         if (cur_device != NULL)
4730                 TAILQ_INSERT_BEFORE(cur_device, device, links);
4731         else
4732                 TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
4733         target->generation++;
4734         return (device);
4735 }
4736
4737 void
4738 xpt_acquire_device(struct cam_ed *device)
4739 {
4740         struct cam_eb *bus = device->target->bus;
4741
4742         mtx_lock(&bus->eb_mtx);
4743         device->refcount++;
4744         mtx_unlock(&bus->eb_mtx);
4745 }
4746
4747 void
4748 xpt_release_device(struct cam_ed *device)
4749 {
4750         struct cam_eb *bus = device->target->bus;
4751         struct cam_devq *devq;
4752
4753         mtx_lock(&bus->eb_mtx);
4754         if (--device->refcount > 0) {
4755                 mtx_unlock(&bus->eb_mtx);
4756                 return;
4757         }
4758
4759         TAILQ_REMOVE(&device->target->ed_entries, device,links);
4760         device->target->generation++;
4761         mtx_unlock(&bus->eb_mtx);
4762
4763         /* Release our slot in the devq */
4764         devq = bus->sim->devq;
4765         mtx_lock(&devq->send_mtx);
4766         cam_devq_resize(devq, devq->send_queue.array_size - 1);
4767         mtx_unlock(&devq->send_mtx);
4768
4769         KASSERT(SLIST_EMPTY(&device->periphs),
4770             ("destroying device, but periphs list is not empty"));
4771         KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
4772             ("destroying device while still queued for ccbs"));
4773
4774         if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
4775                 callout_stop(&device->callout);
4776
4777         xpt_release_target(device->target);
4778
4779         cam_ccbq_fini(&device->ccbq);
4780         /*
4781          * Free allocated memory.  free(9) does nothing if the
4782          * supplied pointer is NULL, so it is safe to call without
4783          * checking.
4784          */
4785         free(device->supported_vpds, M_CAMXPT);
4786         free(device->device_id, M_CAMXPT);
4787         free(device->physpath, M_CAMXPT);
4788         free(device->rcap_buf, M_CAMXPT);
4789         free(device->serial_num, M_CAMXPT);
4790         taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
4791 }
4792
4793 u_int32_t
4794 xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
4795 {
4796         int     result;
4797         struct  cam_ed *dev;
4798
4799         dev = path->device;
4800         mtx_lock(&dev->sim->devq->send_mtx);
4801         result = cam_ccbq_resize(&dev->ccbq, newopenings);
4802         mtx_unlock(&dev->sim->devq->send_mtx);
4803         if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
4804          || (dev->inq_flags & SID_CmdQue) != 0)
4805                 dev->tag_saved_openings = newopenings;
4806         return (result);
4807 }
4808
4809 static struct cam_eb *
4810 xpt_find_bus(path_id_t path_id)
4811 {
4812         struct cam_eb *bus;
4813
4814         xpt_lock_buses();
4815         for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4816              bus != NULL;
4817              bus = TAILQ_NEXT(bus, links)) {
4818                 if (bus->path_id == path_id) {
4819                         bus->refcount++;
4820                         break;
4821                 }
4822         }
4823         xpt_unlock_buses();
4824         return (bus);
4825 }
4826
4827 static struct cam_et *
4828 xpt_find_target(struct cam_eb *bus, target_id_t target_id)
4829 {
4830         struct cam_et *target;
4831
4832         mtx_assert(&bus->eb_mtx, MA_OWNED);
4833         for (target = TAILQ_FIRST(&bus->et_entries);
4834              target != NULL;
4835              target = TAILQ_NEXT(target, links)) {
4836                 if (target->target_id == target_id) {
4837                         target->refcount++;
4838                         break;
4839                 }
4840         }
4841         return (target);
4842 }
4843
4844 static struct cam_ed *
4845 xpt_find_device(struct cam_et *target, lun_id_t lun_id)
4846 {
4847         struct cam_ed *device;
4848
4849         mtx_assert(&target->bus->eb_mtx, MA_OWNED);
4850         for (device = TAILQ_FIRST(&target->ed_entries);
4851              device != NULL;
4852              device = TAILQ_NEXT(device, links)) {
4853                 if (device->lun_id == lun_id) {
4854                         device->refcount++;
4855                         break;
4856                 }
4857         }
4858         return (device);
4859 }
4860
4861 void
4862 xpt_start_tags(struct cam_path *path)
4863 {
4864         struct ccb_relsim crs;
4865         struct cam_ed *device;
4866         struct cam_sim *sim;
4867         int    newopenings;
4868
4869         device = path->device;
4870         sim = path->bus->sim;
4871         device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4872         xpt_freeze_devq(path, /*count*/1);
4873         device->inq_flags |= SID_CmdQue;
4874         if (device->tag_saved_openings != 0)
4875                 newopenings = device->tag_saved_openings;
4876         else
4877                 newopenings = min(device->maxtags,
4878                                   sim->max_tagged_dev_openings);
4879         xpt_dev_ccbq_resize(path, newopenings);
4880         xpt_async(AC_GETDEV_CHANGED, path, NULL);
4881         xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4882         crs.ccb_h.func_code = XPT_REL_SIMQ;
4883         crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4884         crs.openings
4885             = crs.release_timeout
4886             = crs.qfrozen_cnt
4887             = 0;
4888         xpt_action((union ccb *)&crs);
4889 }
4890
4891 void
4892 xpt_stop_tags(struct cam_path *path)
4893 {
4894         struct ccb_relsim crs;
4895         struct cam_ed *device;
4896         struct cam_sim *sim;
4897
4898         device = path->device;
4899         sim = path->bus->sim;
4900         device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4901         device->tag_delay_count = 0;
4902         xpt_freeze_devq(path, /*count*/1);
4903         device->inq_flags &= ~SID_CmdQue;
4904         xpt_dev_ccbq_resize(path, sim->max_dev_openings);
4905         xpt_async(AC_GETDEV_CHANGED, path, NULL);
4906         xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4907         crs.ccb_h.func_code = XPT_REL_SIMQ;
4908         crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4909         crs.openings
4910             = crs.release_timeout
4911             = crs.qfrozen_cnt
4912             = 0;
4913         xpt_action((union ccb *)&crs);
4914 }
4915
4916 static void
4917 xpt_boot_delay(void *arg)
4918 {
4919
4920         xpt_release_boot();
4921 }
4922
4923 static void
4924 xpt_config(void *arg)
4925 {
4926         /*
4927          * Now that interrupts are enabled, go find our devices
4928          */
4929         if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
4930                 printf("xpt_config: failed to create taskqueue thread.\n");
4931
4932         /* Setup debugging path */
4933         if (cam_dflags != CAM_DEBUG_NONE) {
4934                 if (xpt_create_path(&cam_dpath, NULL,
4935                                     CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
4936                                     CAM_DEBUG_LUN) != CAM_REQ_CMP) {
4937                         printf("xpt_config: xpt_create_path() failed for debug"
4938                                " target %d:%d:%d, debugging disabled\n",
4939                                CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
4940                         cam_dflags = CAM_DEBUG_NONE;
4941                 }
4942         } else
4943                 cam_dpath = NULL;
4944
4945         periphdriver_init(1);
4946         xpt_hold_boot();
4947         callout_init(&xsoftc.boot_callout, 1);
4948         callout_reset(&xsoftc.boot_callout, hz * xsoftc.boot_delay / 1000,
4949             xpt_boot_delay, NULL);
4950         /* Fire up rescan thread. */
4951         if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
4952             "cam", "scanner")) {
4953                 printf("xpt_config: failed to create rescan thread.\n");
4954         }
4955 }
4956
4957 void
4958 xpt_hold_boot(void)
4959 {
4960         xpt_lock_buses();
4961         xsoftc.buses_to_config++;
4962         xpt_unlock_buses();
4963 }
4964
4965 void
4966 xpt_release_boot(void)
4967 {
4968         xpt_lock_buses();
4969         xsoftc.buses_to_config--;
4970         if (xsoftc.buses_to_config == 0 && xsoftc.buses_config_done == 0) {
4971                 struct  xpt_task *task;
4972
4973                 xsoftc.buses_config_done = 1;
4974                 xpt_unlock_buses();
4975                 /* Call manually because we don't have any busses */
4976                 task = malloc(sizeof(struct xpt_task), M_CAMXPT, M_NOWAIT);
4977                 if (task != NULL) {
4978                         TASK_INIT(&task->task, 0, xpt_finishconfig_task, task);
4979                         taskqueue_enqueue(taskqueue_thread, &task->task);
4980                 }
4981         } else
4982                 xpt_unlock_buses();
4983 }
4984
4985 /*
4986  * If the given device only has one peripheral attached to it, and if that
4987  * peripheral is the passthrough driver, announce it.  This insures that the
4988  * user sees some sort of announcement for every peripheral in their system.
4989  */
4990 static int
4991 xptpassannouncefunc(struct cam_ed *device, void *arg)
4992 {
4993         struct cam_periph *periph;
4994         int i;
4995
4996         for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
4997              periph = SLIST_NEXT(periph, periph_links), i++);
4998
4999         periph = SLIST_FIRST(&device->periphs);
5000         if ((i == 1)
5001          && (strncmp(periph->periph_name, "pass", 4) == 0))
5002                 xpt_announce_periph(periph, NULL);
5003
5004         return(1);
5005 }
5006
5007 static void
5008 xpt_finishconfig_task(void *context, int pending)
5009 {
5010
5011         periphdriver_init(2);
5012         /*
5013          * Check for devices with no "standard" peripheral driver
5014          * attached.  For any devices like that, announce the
5015          * passthrough driver so the user will see something.
5016          */
5017         if (!bootverbose)
5018                 xpt_for_all_devices(xptpassannouncefunc, NULL);
5019
5020         /* Release our hook so that the boot can continue. */
5021         config_intrhook_disestablish(xsoftc.xpt_config_hook);
5022         free(xsoftc.xpt_config_hook, M_CAMXPT);
5023         xsoftc.xpt_config_hook = NULL;
5024
5025         free(context, M_CAMXPT);
5026 }
5027
5028 cam_status
5029 xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
5030                    struct cam_path *path)
5031 {
5032         struct ccb_setasync csa;
5033         cam_status status;
5034         int xptpath = 0;
5035
5036         if (path == NULL) {
5037                 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
5038                                          CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
5039                 if (status != CAM_REQ_CMP)
5040                         return (status);
5041                 xpt_path_lock(path);
5042                 xptpath = 1;
5043         }
5044
5045         xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
5046         csa.ccb_h.func_code = XPT_SASYNC_CB;
5047         csa.event_enable = event;
5048         csa.callback = cbfunc;
5049         csa.callback_arg = cbarg;
5050         xpt_action((union ccb *)&csa);
5051         status = csa.ccb_h.status;
5052
5053         if (xptpath) {
5054                 xpt_path_unlock(path);
5055                 xpt_free_path(path);
5056         }
5057
5058         if ((status == CAM_REQ_CMP) &&
5059             (csa.event_enable & AC_FOUND_DEVICE)) {
5060                 /*
5061                  * Get this peripheral up to date with all
5062                  * the currently existing devices.
5063                  */
5064                 xpt_for_all_devices(xptsetasyncfunc, &csa);
5065         }
5066         if ((status == CAM_REQ_CMP) &&
5067             (csa.event_enable & AC_PATH_REGISTERED)) {
5068                 /*
5069                  * Get this peripheral up to date with all
5070                  * the currently existing busses.
5071                  */
5072                 xpt_for_all_busses(xptsetasyncbusfunc, &csa);
5073         }
5074
5075         return (status);
5076 }
5077
5078 static void
5079 xptaction(struct cam_sim *sim, union ccb *work_ccb)
5080 {
5081         CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
5082
5083         switch (work_ccb->ccb_h.func_code) {
5084         /* Common cases first */
5085         case XPT_PATH_INQ:              /* Path routing inquiry */
5086         {
5087                 struct ccb_pathinq *cpi;
5088
5089                 cpi = &work_ccb->cpi;
5090                 cpi->version_num = 1; /* XXX??? */
5091                 cpi->hba_inquiry = 0;
5092                 cpi->target_sprt = 0;
5093                 cpi->hba_misc = 0;
5094                 cpi->hba_eng_cnt = 0;
5095                 cpi->max_target = 0;
5096                 cpi->max_lun = 0;
5097                 cpi->initiator_id = 0;
5098                 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
5099                 strncpy(cpi->hba_vid, "", HBA_IDLEN);
5100                 strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
5101                 cpi->unit_number = sim->unit_number;
5102                 cpi->bus_id = sim->bus_id;
5103                 cpi->base_transfer_speed = 0;
5104                 cpi->protocol = PROTO_UNSPECIFIED;
5105                 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
5106                 cpi->transport = XPORT_UNSPECIFIED;
5107                 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
5108                 cpi->ccb_h.status = CAM_REQ_CMP;
5109                 xpt_done(work_ccb);
5110                 break;
5111         }
5112         default:
5113                 work_ccb->ccb_h.status = CAM_REQ_INVALID;
5114                 xpt_done(work_ccb);
5115                 break;
5116         }
5117 }
5118
5119 /*
5120  * The xpt as a "controller" has no interrupt sources, so polling
5121  * is a no-op.
5122  */
5123 static void
5124 xptpoll(struct cam_sim *sim)
5125 {
5126 }
5127
5128 void
5129 xpt_lock_buses(void)
5130 {
5131         mtx_lock(&xsoftc.xpt_topo_lock);
5132 }
5133
5134 void
5135 xpt_unlock_buses(void)
5136 {
5137         mtx_unlock(&xsoftc.xpt_topo_lock);
5138 }
5139
5140 struct mtx *
5141 xpt_path_mtx(struct cam_path *path)
5142 {
5143
5144         return (&path->device->device_mtx);
5145 }
5146
5147 static void
5148 xpt_done_process(struct ccb_hdr *ccb_h)
5149 {
5150         struct cam_sim *sim;
5151         struct cam_devq *devq;
5152         struct mtx *mtx = NULL;
5153
5154         if (ccb_h->flags & CAM_HIGH_POWER) {
5155                 struct highpowerlist    *hphead;
5156                 struct cam_ed           *device;
5157
5158                 mtx_lock(&xsoftc.xpt_highpower_lock);
5159                 hphead = &xsoftc.highpowerq;
5160
5161                 device = STAILQ_FIRST(hphead);
5162
5163                 /*
5164                  * Increment the count since this command is done.
5165                  */
5166                 xsoftc.num_highpower++;
5167
5168                 /*
5169                  * Any high powered commands queued up?
5170                  */
5171                 if (device != NULL) {
5172
5173                         STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
5174                         mtx_unlock(&xsoftc.xpt_highpower_lock);
5175
5176                         mtx_lock(&device->sim->devq->send_mtx);
5177                         xpt_release_devq_device(device,
5178                                          /*count*/1, /*runqueue*/TRUE);
5179                         mtx_unlock(&device->sim->devq->send_mtx);
5180                 } else
5181                         mtx_unlock(&xsoftc.xpt_highpower_lock);
5182         }
5183
5184         sim = ccb_h->path->bus->sim;
5185
5186         if (ccb_h->status & CAM_RELEASE_SIMQ) {
5187                 xpt_release_simq(sim, /*run_queue*/FALSE);
5188                 ccb_h->status &= ~CAM_RELEASE_SIMQ;
5189         }
5190
5191         if ((ccb_h->flags & CAM_DEV_QFRZDIS)
5192          && (ccb_h->status & CAM_DEV_QFRZN)) {
5193                 xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
5194                 ccb_h->status &= ~CAM_DEV_QFRZN;
5195         }
5196
5197         devq = sim->devq;
5198         if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
5199                 struct cam_ed *dev = ccb_h->path->device;
5200
5201                 mtx_lock(&devq->send_mtx);
5202                 devq->send_active--;
5203                 devq->send_openings++;
5204                 cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
5205
5206                 if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
5207                   && (dev->ccbq.dev_active == 0))) {
5208                         dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
5209                         xpt_release_devq_device(dev, /*count*/1,
5210                                          /*run_queue*/FALSE);
5211                 }
5212
5213                 if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
5214                   && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
5215                         dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
5216                         xpt_release_devq_device(dev, /*count*/1,
5217                                          /*run_queue*/FALSE);
5218                 }
5219
5220                 if (!device_is_queued(dev))
5221                         (void)xpt_schedule_devq(devq, dev);
5222                 xpt_run_devq(devq);
5223                 mtx_unlock(&devq->send_mtx);
5224
5225                 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
5226                         mtx = xpt_path_mtx(ccb_h->path);
5227                         mtx_lock(mtx);
5228
5229                         if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5230                          && (--dev->tag_delay_count == 0))
5231                                 xpt_start_tags(ccb_h->path);
5232                 }
5233         }
5234
5235         if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
5236                 if (mtx == NULL) {
5237                         mtx = xpt_path_mtx(ccb_h->path);
5238                         mtx_lock(mtx);
5239                 }
5240         } else {
5241                 if (mtx != NULL) {
5242                         mtx_unlock(mtx);
5243                         mtx = NULL;
5244                 }
5245         }
5246
5247         /* Call the peripheral driver's callback */
5248         ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
5249         (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
5250         if (mtx != NULL)
5251                 mtx_unlock(mtx);
5252 }
5253
5254 void
5255 xpt_done_td(void *arg)
5256 {
5257         struct cam_doneq *queue = arg;
5258         struct ccb_hdr *ccb_h;
5259         STAILQ_HEAD(, ccb_hdr)  doneq;
5260
5261         STAILQ_INIT(&doneq);
5262         mtx_lock(&queue->cam_doneq_mtx);
5263         while (1) {
5264                 while (STAILQ_EMPTY(&queue->cam_doneq)) {
5265                         queue->cam_doneq_sleep = 1;
5266                         msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5267                             PRIBIO, "-", 0);
5268                         queue->cam_doneq_sleep = 0;
5269                 }
5270                 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5271                 mtx_unlock(&queue->cam_doneq_mtx);
5272
5273                 THREAD_NO_SLEEPING();
5274                 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5275                         STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5276                         xpt_done_process(ccb_h);
5277                 }
5278                 THREAD_SLEEPING_OK();
5279
5280                 mtx_lock(&queue->cam_doneq_mtx);
5281         }
5282 }
5283
5284 static void
5285 camisr_runqueue(void)
5286 {
5287         struct  ccb_hdr *ccb_h;
5288         struct cam_doneq *queue;
5289         int i;
5290
5291         /* Process global queues. */
5292         for (i = 0; i < cam_num_doneqs; i++) {
5293                 queue = &cam_doneqs[i];
5294                 mtx_lock(&queue->cam_doneq_mtx);
5295                 while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
5296                         STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
5297                         mtx_unlock(&queue->cam_doneq_mtx);
5298                         xpt_done_process(ccb_h);
5299                         mtx_lock(&queue->cam_doneq_mtx);
5300                 }
5301                 mtx_unlock(&queue->cam_doneq_mtx);
5302         }
5303 }