2 * Copyright 2009 Scott Long
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions, and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. The name of the author may not be used to endorse or promote products
12 * derived from this software without specific prior written permission.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
18 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 #ifndef _CAM_CAM_XPT_INTERNAL_H
30 #define _CAM_CAM_XPT_INTERNAL_H 1
32 /* Forward Declarations */
37 typedef struct cam_ed * (*xpt_alloc_device_func)(struct cam_eb *bus,
38 struct cam_et *target,
40 typedef void (*xpt_release_device_func)(struct cam_ed *device);
41 typedef void (*xpt_action_func)(union ccb *start_ccb);
42 typedef void (*xpt_dev_async_func)(u_int32_t async_code,
44 struct cam_et *target,
45 struct cam_ed *device,
47 typedef void (*xpt_announce_periph_func)(struct cam_periph *periph);
50 xpt_alloc_device_func alloc_device;
51 xpt_release_device_func reldev;
52 xpt_action_func action;
53 xpt_dev_async_func async;
54 xpt_announce_periph_func announce;
58 * Structure for queueing a device in a run queue.
59 * There is one run queue for allocating new ccbs,
60 * and another for sending ccbs to the controller.
64 struct cam_ed *device;
68 * The CAM EDT (Existing Device Table) contains the device information for
69 * all devices for all busses in the system. The table contains a
70 * cam_ed structure for each device on the bus.
73 TAILQ_ENTRY(cam_ed) links;
74 struct cam_ed_qinfo devq_entry;
75 struct cam_et *target;
79 * Queue of type drivers wanting to do
80 * work on this device.
82 struct cam_ccbq ccbq; /* Queue of pending ccbs */
83 struct async_list asyncs; /* Async callback info for this B/T/L */
84 struct periph_list periphs; /* All attached devices */
85 u_int generation; /* Generation number */
86 struct cam_periph *owner; /* Peripheral driver's ownership tag */
87 void *quirk; /* Oddities about this device */
91 u_int protocol_version;
93 u_int transport_version;
94 struct scsi_inquiry_data inq_data;
95 uint8_t *supported_vpds;
96 uint8_t supported_vpds_len;
97 uint32_t device_id_len;
100 uint8_t *physpath; /* physical path string form */
103 struct ata_params ident_data;
104 u_int8_t inq_flags; /*
105 * Current settings for inquiry flags.
106 * This allows us to override settings
107 * like disconnection and tagged
108 * queuing for a device.
110 u_int8_t queue_flags; /* Queue flags from the control page */
111 u_int8_t serial_num_len;
112 u_int8_t *serial_num;
114 #define CAM_DEV_UNCONFIGURED 0x01
115 #define CAM_DEV_REL_TIMEOUT_PENDING 0x02
116 #define CAM_DEV_REL_ON_COMPLETE 0x04
117 #define CAM_DEV_REL_ON_QUEUE_EMPTY 0x08
118 #define CAM_DEV_TAG_AFTER_COUNT 0x20
119 #define CAM_DEV_INQUIRY_DATA_VALID 0x40
120 #define CAM_DEV_IN_DV 0x80
121 #define CAM_DEV_DV_HIT_BOTTOM 0x100
122 #define CAM_DEV_IDENTIFY_DATA_VALID 0x200
123 u_int32_t tag_delay_count;
124 #define CAM_TAG_DELAY_COUNT 5
125 u_int32_t tag_saved_openings;
127 struct callout callout;
128 STAILQ_ENTRY(cam_ed) highpowerq_entry;
132 * Each target is represented by an ET (Existing Target). These
133 * entries are created when a target is successfully probed with an
134 * identify, and removed when a device fails to respond after a number
135 * of retries, or a bus rescan finds the device missing.
138 TAILQ_HEAD(, cam_ed) ed_entries;
139 TAILQ_ENTRY(cam_et) links;
141 target_id_t target_id;
144 struct timeval last_reset;
146 struct scsi_report_luns_data *luns;
150 * Each bus is represented by an EB (Existing Bus). These entries
151 * are created by calls to xpt_bus_register and deleted by calls to
152 * xpt_bus_deregister.
155 TAILQ_HEAD(, cam_et) et_entries;
156 TAILQ_ENTRY(cam_eb) links;
159 struct timeval last_reset;
161 #define CAM_EB_RUNQ_SCHEDULED 0x01
165 struct xpt_xport *xport;
169 struct cam_periph *periph;
171 struct cam_et *target;
172 struct cam_ed *device;
175 struct xpt_xport * scsi_get_xport(void);
176 struct xpt_xport * ata_get_xport(void);
178 struct cam_ed * xpt_alloc_device(struct cam_eb *bus,
179 struct cam_et *target,
181 void xpt_acquire_device(struct cam_ed *device);
182 void xpt_release_device(struct cam_ed *device);
183 int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
184 u_int32_t new_priority);
185 u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings);
186 void xpt_start_tags(struct cam_path *path);
187 void xpt_stop_tags(struct cam_path *path);
189 MALLOC_DECLARE(M_CAMXPT);