2 * Copyright (c) 2003-2009 Silicon Graphics International Corp.
3 * Copyright (c) 2012 The FreeBSD Foundation
6 * Portions of this software were developed by Edward Tomasz Napierala
7 * under sponsorship from the FreeBSD Foundation.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions, and the following disclaimer,
14 * without modification.
15 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
16 * substantially similar to the "NO WARRANTY" disclaimer below
17 * ("Disclaimer") and any redistribution must be conditioned upon
18 * including a substantially similar Disclaimer requirement for further
19 * binary redistribution.
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
30 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
31 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32 * POSSIBILITY OF SUCH DAMAGES.
34 * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl.c#8 $
37 * CAM Target Layer, a SCSI device emulation subsystem.
39 * Author: Ken Merry <ken@FreeBSD.org>
44 #include <sys/cdefs.h>
45 __FBSDID("$FreeBSD$");
47 #include <sys/param.h>
48 #include <sys/systm.h>
49 #include <sys/kernel.h>
50 #include <sys/types.h>
51 #include <sys/kthread.h>
53 #include <sys/fcntl.h>
55 #include <sys/module.h>
56 #include <sys/mutex.h>
57 #include <sys/condvar.h>
58 #include <sys/malloc.h>
60 #include <sys/ioccom.h>
61 #include <sys/queue.h>
64 #include <sys/endian.h>
65 #include <sys/sysctl.h>
68 #include <cam/scsi/scsi_all.h>
69 #include <cam/scsi/scsi_da.h>
70 #include <cam/ctl/ctl_io.h>
71 #include <cam/ctl/ctl.h>
72 #include <cam/ctl/ctl_frontend.h>
73 #include <cam/ctl/ctl_frontend_internal.h>
74 #include <cam/ctl/ctl_util.h>
75 #include <cam/ctl/ctl_backend.h>
76 #include <cam/ctl/ctl_ioctl.h>
77 #include <cam/ctl/ctl_ha.h>
78 #include <cam/ctl/ctl_private.h>
79 #include <cam/ctl/ctl_debug.h>
80 #include <cam/ctl/ctl_scsi_all.h>
81 #include <cam/ctl/ctl_error.h>
83 struct ctl_softc *control_softc = NULL;
86 * Size and alignment macros needed for Copan-specific HA hardware. These
87 * can go away when the HA code is re-written, and uses busdma for any
90 #define CTL_ALIGN_8B(target, source, type) \
91 if (((uint32_t)source & 0x7) != 0) \
92 target = (type)(source + (0x8 - ((uint32_t)source & 0x7)));\
94 target = (type)source;
96 #define CTL_SIZE_8B(target, size) \
97 if ((size & 0x7) != 0) \
98 target = size + (0x8 - (size & 0x7)); \
102 #define CTL_ALIGN_8B_MARGIN 16
105 * Template mode pages.
109 * Note that these are default values only. The actual values will be
110 * filled in when the user does a mode sense.
112 static struct copan_power_subpage power_page_default = {
113 /*page_code*/ PWR_PAGE_CODE | SMPH_SPF,
114 /*subpage*/ PWR_SUBPAGE_CODE,
115 /*page_length*/ {(sizeof(struct copan_power_subpage) - 4) & 0xff00,
116 (sizeof(struct copan_power_subpage) - 4) & 0x00ff},
117 /*page_version*/ PWR_VERSION,
119 /* max_active_luns*/ PWR_DFLT_MAX_LUNS,
120 /*reserved*/ {0, 0, 0, 0, 0, 0, 0, 0, 0,
121 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
125 static struct copan_power_subpage power_page_changeable = {
126 /*page_code*/ PWR_PAGE_CODE | SMPH_SPF,
127 /*subpage*/ PWR_SUBPAGE_CODE,
128 /*page_length*/ {(sizeof(struct copan_power_subpage) - 4) & 0xff00,
129 (sizeof(struct copan_power_subpage) - 4) & 0x00ff},
132 /* max_active_luns*/ 0,
133 /*reserved*/ {0, 0, 0, 0, 0, 0, 0, 0, 0,
134 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
138 static struct copan_aps_subpage aps_page_default = {
139 APS_PAGE_CODE | SMPH_SPF, //page_code
140 APS_SUBPAGE_CODE, //subpage
141 {(sizeof(struct copan_aps_subpage) - 4) & 0xff00,
142 (sizeof(struct copan_aps_subpage) - 4) & 0x00ff}, //page_length
143 APS_VERSION, //page_version
145 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
146 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
147 0, 0, 0, 0, 0} //reserved
150 static struct copan_aps_subpage aps_page_changeable = {
151 APS_PAGE_CODE | SMPH_SPF, //page_code
152 APS_SUBPAGE_CODE, //subpage
153 {(sizeof(struct copan_aps_subpage) - 4) & 0xff00,
154 (sizeof(struct copan_aps_subpage) - 4) & 0x00ff}, //page_length
157 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
158 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
159 0, 0, 0, 0, 0} //reserved
162 static struct copan_debugconf_subpage debugconf_page_default = {
163 DBGCNF_PAGE_CODE | SMPH_SPF, /* page_code */
164 DBGCNF_SUBPAGE_CODE, /* subpage */
165 {(sizeof(struct copan_debugconf_subpage) - 4) >> 8,
166 (sizeof(struct copan_debugconf_subpage) - 4) >> 0}, /* page_length */
167 DBGCNF_VERSION, /* page_version */
168 {CTL_TIME_IO_DEFAULT_SECS>>8,
169 CTL_TIME_IO_DEFAULT_SECS>>0}, /* ctl_time_io_secs */
172 static struct copan_debugconf_subpage debugconf_page_changeable = {
173 DBGCNF_PAGE_CODE | SMPH_SPF, /* page_code */
174 DBGCNF_SUBPAGE_CODE, /* subpage */
175 {(sizeof(struct copan_debugconf_subpage) - 4) >> 8,
176 (sizeof(struct copan_debugconf_subpage) - 4) >> 0}, /* page_length */
177 0, /* page_version */
178 {0xff,0xff}, /* ctl_time_io_secs */
181 static struct scsi_format_page format_page_default = {
182 /*page_code*/SMS_FORMAT_DEVICE_PAGE,
183 /*page_length*/sizeof(struct scsi_format_page) - 2,
184 /*tracks_per_zone*/ {0, 0},
185 /*alt_sectors_per_zone*/ {0, 0},
186 /*alt_tracks_per_zone*/ {0, 0},
187 /*alt_tracks_per_lun*/ {0, 0},
188 /*sectors_per_track*/ {(CTL_DEFAULT_SECTORS_PER_TRACK >> 8) & 0xff,
189 CTL_DEFAULT_SECTORS_PER_TRACK & 0xff},
190 /*bytes_per_sector*/ {0, 0},
191 /*interleave*/ {0, 0},
192 /*track_skew*/ {0, 0},
193 /*cylinder_skew*/ {0, 0},
195 /*reserved*/ {0, 0, 0}
198 static struct scsi_format_page format_page_changeable = {
199 /*page_code*/SMS_FORMAT_DEVICE_PAGE,
200 /*page_length*/sizeof(struct scsi_format_page) - 2,
201 /*tracks_per_zone*/ {0, 0},
202 /*alt_sectors_per_zone*/ {0, 0},
203 /*alt_tracks_per_zone*/ {0, 0},
204 /*alt_tracks_per_lun*/ {0, 0},
205 /*sectors_per_track*/ {0, 0},
206 /*bytes_per_sector*/ {0, 0},
207 /*interleave*/ {0, 0},
208 /*track_skew*/ {0, 0},
209 /*cylinder_skew*/ {0, 0},
211 /*reserved*/ {0, 0, 0}
214 static struct scsi_rigid_disk_page rigid_disk_page_default = {
215 /*page_code*/SMS_RIGID_DISK_PAGE,
216 /*page_length*/sizeof(struct scsi_rigid_disk_page) - 2,
217 /*cylinders*/ {0, 0, 0},
218 /*heads*/ CTL_DEFAULT_HEADS,
219 /*start_write_precomp*/ {0, 0, 0},
220 /*start_reduced_current*/ {0, 0, 0},
221 /*step_rate*/ {0, 0},
222 /*landing_zone_cylinder*/ {0, 0, 0},
223 /*rpl*/ SRDP_RPL_DISABLED,
224 /*rotational_offset*/ 0,
226 /*rotation_rate*/ {(CTL_DEFAULT_ROTATION_RATE >> 8) & 0xff,
227 CTL_DEFAULT_ROTATION_RATE & 0xff},
231 static struct scsi_rigid_disk_page rigid_disk_page_changeable = {
232 /*page_code*/SMS_RIGID_DISK_PAGE,
233 /*page_length*/sizeof(struct scsi_rigid_disk_page) - 2,
234 /*cylinders*/ {0, 0, 0},
236 /*start_write_precomp*/ {0, 0, 0},
237 /*start_reduced_current*/ {0, 0, 0},
238 /*step_rate*/ {0, 0},
239 /*landing_zone_cylinder*/ {0, 0, 0},
241 /*rotational_offset*/ 0,
243 /*rotation_rate*/ {0, 0},
247 static struct scsi_caching_page caching_page_default = {
248 /*page_code*/SMS_CACHING_PAGE,
249 /*page_length*/sizeof(struct scsi_caching_page) - 2,
250 /*flags1*/ SCP_DISC | SCP_WCE,
252 /*disable_pf_transfer_len*/ {0xff, 0xff},
253 /*min_prefetch*/ {0, 0},
254 /*max_prefetch*/ {0xff, 0xff},
255 /*max_pf_ceiling*/ {0xff, 0xff},
257 /*cache_segments*/ 0,
258 /*cache_seg_size*/ {0, 0},
260 /*non_cache_seg_size*/ {0, 0, 0}
263 static struct scsi_caching_page caching_page_changeable = {
264 /*page_code*/SMS_CACHING_PAGE,
265 /*page_length*/sizeof(struct scsi_caching_page) - 2,
266 /*flags1*/ SCP_WCE | SCP_RCD,
268 /*disable_pf_transfer_len*/ {0, 0},
269 /*min_prefetch*/ {0, 0},
270 /*max_prefetch*/ {0, 0},
271 /*max_pf_ceiling*/ {0, 0},
273 /*cache_segments*/ 0,
274 /*cache_seg_size*/ {0, 0},
276 /*non_cache_seg_size*/ {0, 0, 0}
279 static struct scsi_control_page control_page_default = {
280 /*page_code*/SMS_CONTROL_MODE_PAGE,
281 /*page_length*/sizeof(struct scsi_control_page) - 2,
283 /*queue_flags*/SCP_QUEUE_ALG_RESTRICTED,
286 /*aen_holdoff_period*/{0, 0},
287 /*busy_timeout_period*/{0, 0},
288 /*extended_selftest_completion_time*/{0, 0}
291 static struct scsi_control_page control_page_changeable = {
292 /*page_code*/SMS_CONTROL_MODE_PAGE,
293 /*page_length*/sizeof(struct scsi_control_page) - 2,
295 /*queue_flags*/SCP_QUEUE_ALG_MASK,
298 /*aen_holdoff_period*/{0, 0},
299 /*busy_timeout_period*/{0, 0},
300 /*extended_selftest_completion_time*/{0, 0}
305 * XXX KDM move these into the softc.
307 static int rcv_sync_msg;
308 static int persis_offset;
309 static uint8_t ctl_pause_rtr;
310 static int ctl_is_single = 1;
311 static int index_to_aps_page;
313 SYSCTL_NODE(_kern_cam, OID_AUTO, ctl, CTLFLAG_RD, 0, "CAM Target Layer");
314 static int worker_threads = -1;
315 TUNABLE_INT("kern.cam.ctl.worker_threads", &worker_threads);
316 SYSCTL_INT(_kern_cam_ctl, OID_AUTO, worker_threads, CTLFLAG_RDTUN,
317 &worker_threads, 1, "Number of worker threads");
318 static int verbose = 0;
319 TUNABLE_INT("kern.cam.ctl.verbose", &verbose);
320 SYSCTL_INT(_kern_cam_ctl, OID_AUTO, verbose, CTLFLAG_RWTUN,
321 &verbose, 0, "Show SCSI errors returned to initiator");
324 * Supported pages (0x00), Serial number (0x80), Device ID (0x83),
325 * Extended INQUIRY Data (0x86), Mode Page Policy (0x87),
326 * SCSI Ports (0x88), Third-party Copy (0x8F), Block limits (0xB0),
327 * Block Device Characteristics (0xB1) and Logical Block Provisioning (0xB2)
329 #define SCSI_EVPD_NUM_SUPPORTED_PAGES 10
331 static void ctl_isc_event_handler(ctl_ha_channel chanel, ctl_ha_event event,
333 static void ctl_copy_sense_data(union ctl_ha_msg *src, union ctl_io *dest);
334 static int ctl_init(void);
335 void ctl_shutdown(void);
336 static int ctl_open(struct cdev *dev, int flags, int fmt, struct thread *td);
337 static int ctl_close(struct cdev *dev, int flags, int fmt, struct thread *td);
338 static void ctl_ioctl_online(void *arg);
339 static void ctl_ioctl_offline(void *arg);
340 static int ctl_ioctl_lun_enable(void *arg, struct ctl_id targ_id, int lun_id);
341 static int ctl_ioctl_lun_disable(void *arg, struct ctl_id targ_id, int lun_id);
342 static int ctl_ioctl_do_datamove(struct ctl_scsiio *ctsio);
343 static int ctl_serialize_other_sc_cmd(struct ctl_scsiio *ctsio);
344 static int ctl_ioctl_submit_wait(union ctl_io *io);
345 static void ctl_ioctl_datamove(union ctl_io *io);
346 static void ctl_ioctl_done(union ctl_io *io);
347 static void ctl_ioctl_hard_startstop_callback(void *arg,
348 struct cfi_metatask *metatask);
349 static void ctl_ioctl_bbrread_callback(void *arg,struct cfi_metatask *metatask);
350 static int ctl_ioctl_fill_ooa(struct ctl_lun *lun, uint32_t *cur_fill_num,
351 struct ctl_ooa *ooa_hdr,
352 struct ctl_ooa_entry *kern_entries);
353 static int ctl_ioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
355 static uint32_t ctl_map_lun(int port_num, uint32_t lun);
356 static uint32_t ctl_map_lun_back(int port_num, uint32_t lun);
358 static union ctl_io *ctl_malloc_io(ctl_io_type io_type, uint32_t targ_port,
359 uint32_t targ_target, uint32_t targ_lun,
361 static void ctl_kfree_io(union ctl_io *io);
363 static int ctl_alloc_lun(struct ctl_softc *ctl_softc, struct ctl_lun *lun,
364 struct ctl_be_lun *be_lun, struct ctl_id target_id);
365 static int ctl_free_lun(struct ctl_lun *lun);
366 static void ctl_create_lun(struct ctl_be_lun *be_lun);
368 static void ctl_failover_change_pages(struct ctl_softc *softc,
369 struct ctl_scsiio *ctsio, int master);
372 static int ctl_do_mode_select(union ctl_io *io);
373 static int ctl_pro_preempt(struct ctl_softc *softc, struct ctl_lun *lun,
374 uint64_t res_key, uint64_t sa_res_key,
375 uint8_t type, uint32_t residx,
376 struct ctl_scsiio *ctsio,
377 struct scsi_per_res_out *cdb,
378 struct scsi_per_res_out_parms* param);
379 static void ctl_pro_preempt_other(struct ctl_lun *lun,
380 union ctl_ha_msg *msg);
381 static void ctl_hndl_per_res_out_on_other_sc(union ctl_ha_msg *msg);
382 static int ctl_inquiry_evpd_supported(struct ctl_scsiio *ctsio, int alloc_len);
383 static int ctl_inquiry_evpd_serial(struct ctl_scsiio *ctsio, int alloc_len);
384 static int ctl_inquiry_evpd_devid(struct ctl_scsiio *ctsio, int alloc_len);
385 static int ctl_inquiry_evpd_eid(struct ctl_scsiio *ctsio, int alloc_len);
386 static int ctl_inquiry_evpd_mpp(struct ctl_scsiio *ctsio, int alloc_len);
387 static int ctl_inquiry_evpd_scsi_ports(struct ctl_scsiio *ctsio,
389 static int ctl_inquiry_evpd_block_limits(struct ctl_scsiio *ctsio,
391 static int ctl_inquiry_evpd_bdc(struct ctl_scsiio *ctsio, int alloc_len);
392 static int ctl_inquiry_evpd_lbp(struct ctl_scsiio *ctsio, int alloc_len);
393 static int ctl_inquiry_evpd(struct ctl_scsiio *ctsio);
394 static int ctl_inquiry_std(struct ctl_scsiio *ctsio);
395 static int ctl_get_lba_len(union ctl_io *io, uint64_t *lba, uint64_t *len);
396 static ctl_action ctl_extent_check(union ctl_io *io1, union ctl_io *io2);
397 static ctl_action ctl_check_for_blockage(struct ctl_lun *lun,
398 union ctl_io *pending_io, union ctl_io *ooa_io);
399 static ctl_action ctl_check_ooa(struct ctl_lun *lun, union ctl_io *pending_io,
400 union ctl_io *starting_io);
401 static int ctl_check_blocked(struct ctl_lun *lun);
402 static int ctl_scsiio_lun_check(struct ctl_softc *ctl_softc,
404 const struct ctl_cmd_entry *entry,
405 struct ctl_scsiio *ctsio);
406 //static int ctl_check_rtr(union ctl_io *pending_io, struct ctl_softc *softc);
407 static void ctl_failover(void);
408 static int ctl_scsiio_precheck(struct ctl_softc *ctl_softc,
409 struct ctl_scsiio *ctsio);
410 static int ctl_scsiio(struct ctl_scsiio *ctsio);
412 static int ctl_bus_reset(struct ctl_softc *ctl_softc, union ctl_io *io);
413 static int ctl_target_reset(struct ctl_softc *ctl_softc, union ctl_io *io,
414 ctl_ua_type ua_type);
415 static int ctl_lun_reset(struct ctl_lun *lun, union ctl_io *io,
416 ctl_ua_type ua_type);
417 static int ctl_abort_task(union ctl_io *io);
418 static int ctl_abort_task_set(union ctl_io *io);
419 static int ctl_i_t_nexus_reset(union ctl_io *io);
420 static void ctl_run_task(union ctl_io *io);
422 static void ctl_datamove_timer_wakeup(void *arg);
423 static void ctl_done_timer_wakeup(void *arg);
424 #endif /* CTL_IO_DELAY */
426 static void ctl_send_datamove_done(union ctl_io *io, int have_lock);
427 static void ctl_datamove_remote_write_cb(struct ctl_ha_dt_req *rq);
428 static int ctl_datamove_remote_dm_write_cb(union ctl_io *io);
429 static void ctl_datamove_remote_write(union ctl_io *io);
430 static int ctl_datamove_remote_dm_read_cb(union ctl_io *io);
431 static void ctl_datamove_remote_read_cb(struct ctl_ha_dt_req *rq);
432 static int ctl_datamove_remote_sgl_setup(union ctl_io *io);
433 static int ctl_datamove_remote_xfer(union ctl_io *io, unsigned command,
434 ctl_ha_dt_cb callback);
435 static void ctl_datamove_remote_read(union ctl_io *io);
436 static void ctl_datamove_remote(union ctl_io *io);
437 static int ctl_process_done(union ctl_io *io);
438 static void ctl_lun_thread(void *arg);
439 static void ctl_work_thread(void *arg);
440 static void ctl_enqueue_incoming(union ctl_io *io);
441 static void ctl_enqueue_rtr(union ctl_io *io);
442 static void ctl_enqueue_done(union ctl_io *io);
443 static void ctl_enqueue_isc(union ctl_io *io);
444 static const struct ctl_cmd_entry *
445 ctl_get_cmd_entry(struct ctl_scsiio *ctsio, int *sa);
446 static const struct ctl_cmd_entry *
447 ctl_validate_command(struct ctl_scsiio *ctsio);
448 static int ctl_cmd_applicable(uint8_t lun_type,
449 const struct ctl_cmd_entry *entry);
452 * Load the serialization table. This isn't very pretty, but is probably
453 * the easiest way to do it.
455 #include "ctl_ser_table.c"
458 * We only need to define open, close and ioctl routines for this driver.
460 static struct cdevsw ctl_cdevsw = {
461 .d_version = D_VERSION,
464 .d_close = ctl_close,
465 .d_ioctl = ctl_ioctl,
470 MALLOC_DEFINE(M_CTL, "ctlmem", "Memory used for CTL");
471 MALLOC_DEFINE(M_CTLIO, "ctlio", "Memory used for CTL requests");
473 static int ctl_module_event_handler(module_t, int /*modeventtype_t*/, void *);
475 static moduledata_t ctl_moduledata = {
477 ctl_module_event_handler,
481 DECLARE_MODULE(ctl, ctl_moduledata, SI_SUB_CONFIGURE, SI_ORDER_THIRD);
482 MODULE_VERSION(ctl, 1);
484 static struct ctl_frontend ioctl_frontend =
490 ctl_isc_handler_finish_xfer(struct ctl_softc *ctl_softc,
491 union ctl_ha_msg *msg_info)
493 struct ctl_scsiio *ctsio;
495 if (msg_info->hdr.original_sc == NULL) {
496 printf("%s: original_sc == NULL!\n", __func__);
497 /* XXX KDM now what? */
501 ctsio = &msg_info->hdr.original_sc->scsiio;
502 ctsio->io_hdr.flags |= CTL_FLAG_IO_ACTIVE;
503 ctsio->io_hdr.msg_type = CTL_MSG_FINISH_IO;
504 ctsio->io_hdr.status = msg_info->hdr.status;
505 ctsio->scsi_status = msg_info->scsi.scsi_status;
506 ctsio->sense_len = msg_info->scsi.sense_len;
507 ctsio->sense_residual = msg_info->scsi.sense_residual;
508 ctsio->residual = msg_info->scsi.residual;
509 memcpy(&ctsio->sense_data, &msg_info->scsi.sense_data,
510 sizeof(ctsio->sense_data));
511 memcpy(&ctsio->io_hdr.ctl_private[CTL_PRIV_LBA_LEN].bytes,
512 &msg_info->scsi.lbalen, sizeof(msg_info->scsi.lbalen));
513 ctl_enqueue_isc((union ctl_io *)ctsio);
517 ctl_isc_handler_finish_ser_only(struct ctl_softc *ctl_softc,
518 union ctl_ha_msg *msg_info)
520 struct ctl_scsiio *ctsio;
522 if (msg_info->hdr.serializing_sc == NULL) {
523 printf("%s: serializing_sc == NULL!\n", __func__);
524 /* XXX KDM now what? */
528 ctsio = &msg_info->hdr.serializing_sc->scsiio;
531 * Attempt to catch the situation where an I/O has
532 * been freed, and we're using it again.
534 if (ctsio->io_hdr.io_type == 0xff) {
535 union ctl_io *tmp_io;
536 tmp_io = (union ctl_io *)ctsio;
537 printf("%s: %p use after free!\n", __func__,
539 printf("%s: type %d msg %d cdb %x iptl: "
540 "%d:%d:%d:%d tag 0x%04x "
541 "flag %#x status %x\n",
543 tmp_io->io_hdr.io_type,
544 tmp_io->io_hdr.msg_type,
545 tmp_io->scsiio.cdb[0],
546 tmp_io->io_hdr.nexus.initid.id,
547 tmp_io->io_hdr.nexus.targ_port,
548 tmp_io->io_hdr.nexus.targ_target.id,
549 tmp_io->io_hdr.nexus.targ_lun,
550 (tmp_io->io_hdr.io_type ==
552 tmp_io->taskio.tag_num :
553 tmp_io->scsiio.tag_num,
554 tmp_io->io_hdr.flags,
555 tmp_io->io_hdr.status);
558 ctsio->io_hdr.msg_type = CTL_MSG_FINISH_IO;
559 ctl_enqueue_isc((union ctl_io *)ctsio);
563 * ISC (Inter Shelf Communication) event handler. Events from the HA
564 * subsystem come in here.
567 ctl_isc_event_handler(ctl_ha_channel channel, ctl_ha_event event, int param)
569 struct ctl_softc *ctl_softc;
571 struct ctl_prio *presio;
572 ctl_ha_status isc_status;
574 ctl_softc = control_softc;
579 printf("CTL: Isc Msg event %d\n", event);
581 if (event == CTL_HA_EVT_MSG_RECV) {
582 union ctl_ha_msg msg_info;
584 isc_status = ctl_ha_msg_recv(CTL_HA_CHAN_CTL, &msg_info,
585 sizeof(msg_info), /*wait*/ 0);
587 printf("CTL: msg_type %d\n", msg_info.msg_type);
589 if (isc_status != 0) {
590 printf("Error receiving message, status = %d\n",
595 switch (msg_info.hdr.msg_type) {
596 case CTL_MSG_SERIALIZE:
598 printf("Serialize\n");
600 io = ctl_alloc_io((void *)ctl_softc->othersc_pool);
602 printf("ctl_isc_event_handler: can't allocate "
605 /* Need to set busy and send msg back */
606 msg_info.hdr.msg_type = CTL_MSG_BAD_JUJU;
607 msg_info.hdr.status = CTL_SCSI_ERROR;
608 msg_info.scsi.scsi_status = SCSI_STATUS_BUSY;
609 msg_info.scsi.sense_len = 0;
610 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_info,
611 sizeof(msg_info), 0) > CTL_HA_STATUS_SUCCESS){
616 // populate ctsio from msg_info
617 io->io_hdr.io_type = CTL_IO_SCSI;
618 io->io_hdr.msg_type = CTL_MSG_SERIALIZE;
619 io->io_hdr.original_sc = msg_info.hdr.original_sc;
621 printf("pOrig %x\n", (int)msg_info.original_sc);
623 io->io_hdr.flags |= CTL_FLAG_FROM_OTHER_SC |
626 * If we're in serialization-only mode, we don't
627 * want to go through full done processing. Thus
630 * XXX KDM add another flag that is more specific.
632 if (ctl_softc->ha_mode == CTL_HA_MODE_SER_ONLY)
633 io->io_hdr.flags |= CTL_FLAG_INT_COPY;
634 io->io_hdr.nexus = msg_info.hdr.nexus;
636 printf("targ %d, port %d, iid %d, lun %d\n",
637 io->io_hdr.nexus.targ_target.id,
638 io->io_hdr.nexus.targ_port,
639 io->io_hdr.nexus.initid.id,
640 io->io_hdr.nexus.targ_lun);
642 io->scsiio.tag_num = msg_info.scsi.tag_num;
643 io->scsiio.tag_type = msg_info.scsi.tag_type;
644 memcpy(io->scsiio.cdb, msg_info.scsi.cdb,
646 if (ctl_softc->ha_mode == CTL_HA_MODE_XFER) {
647 const struct ctl_cmd_entry *entry;
649 entry = ctl_get_cmd_entry(&io->scsiio, NULL);
650 io->io_hdr.flags &= ~CTL_FLAG_DATA_MASK;
652 entry->flags & CTL_FLAG_DATA_MASK;
657 /* Performed on the Originating SC, XFER mode only */
658 case CTL_MSG_DATAMOVE: {
659 struct ctl_sg_entry *sgl;
662 io = msg_info.hdr.original_sc;
664 printf("%s: original_sc == NULL!\n", __func__);
665 /* XXX KDM do something here */
668 io->io_hdr.msg_type = CTL_MSG_DATAMOVE;
669 io->io_hdr.flags |= CTL_FLAG_IO_ACTIVE;
671 * Keep track of this, we need to send it back over
672 * when the datamove is complete.
674 io->io_hdr.serializing_sc = msg_info.hdr.serializing_sc;
676 if (msg_info.dt.sg_sequence == 0) {
678 * XXX KDM we use the preallocated S/G list
679 * here, but we'll need to change this to
680 * dynamic allocation if we need larger S/G
683 if (msg_info.dt.kern_sg_entries >
684 sizeof(io->io_hdr.remote_sglist) /
685 sizeof(io->io_hdr.remote_sglist[0])) {
686 printf("%s: number of S/G entries "
687 "needed %u > allocated num %zd\n",
689 msg_info.dt.kern_sg_entries,
690 sizeof(io->io_hdr.remote_sglist)/
691 sizeof(io->io_hdr.remote_sglist[0]));
694 * XXX KDM send a message back to
695 * the other side to shut down the
696 * DMA. The error will come back
697 * through via the normal channel.
701 sgl = io->io_hdr.remote_sglist;
703 sizeof(io->io_hdr.remote_sglist));
705 io->scsiio.kern_data_ptr = (uint8_t *)sgl;
707 io->scsiio.kern_sg_entries =
708 msg_info.dt.kern_sg_entries;
709 io->scsiio.rem_sg_entries =
710 msg_info.dt.kern_sg_entries;
711 io->scsiio.kern_data_len =
712 msg_info.dt.kern_data_len;
713 io->scsiio.kern_total_len =
714 msg_info.dt.kern_total_len;
715 io->scsiio.kern_data_resid =
716 msg_info.dt.kern_data_resid;
717 io->scsiio.kern_rel_offset =
718 msg_info.dt.kern_rel_offset;
720 * Clear out per-DMA flags.
722 io->io_hdr.flags &= ~CTL_FLAG_RDMA_MASK;
724 * Add per-DMA flags that are set for this
725 * particular DMA request.
727 io->io_hdr.flags |= msg_info.dt.flags &
730 sgl = (struct ctl_sg_entry *)
731 io->scsiio.kern_data_ptr;
733 for (i = msg_info.dt.sent_sg_entries, j = 0;
734 i < (msg_info.dt.sent_sg_entries +
735 msg_info.dt.cur_sg_entries); i++, j++) {
736 sgl[i].addr = msg_info.dt.sg_list[j].addr;
737 sgl[i].len = msg_info.dt.sg_list[j].len;
740 printf("%s: L: %p,%d -> %p,%d j=%d, i=%d\n",
742 msg_info.dt.sg_list[j].addr,
743 msg_info.dt.sg_list[j].len,
744 sgl[i].addr, sgl[i].len, j, i);
748 memcpy(&sgl[msg_info.dt.sent_sg_entries],
750 sizeof(*sgl) * msg_info.dt.cur_sg_entries);
754 * If this is the last piece of the I/O, we've got
755 * the full S/G list. Queue processing in the thread.
756 * Otherwise wait for the next piece.
758 if (msg_info.dt.sg_last != 0)
762 /* Performed on the Serializing (primary) SC, XFER mode only */
763 case CTL_MSG_DATAMOVE_DONE: {
764 if (msg_info.hdr.serializing_sc == NULL) {
765 printf("%s: serializing_sc == NULL!\n",
767 /* XXX KDM now what? */
771 * We grab the sense information here in case
772 * there was a failure, so we can return status
773 * back to the initiator.
775 io = msg_info.hdr.serializing_sc;
776 io->io_hdr.msg_type = CTL_MSG_DATAMOVE_DONE;
777 io->io_hdr.status = msg_info.hdr.status;
778 io->scsiio.scsi_status = msg_info.scsi.scsi_status;
779 io->scsiio.sense_len = msg_info.scsi.sense_len;
780 io->scsiio.sense_residual =msg_info.scsi.sense_residual;
781 io->io_hdr.port_status = msg_info.scsi.fetd_status;
782 io->scsiio.residual = msg_info.scsi.residual;
783 memcpy(&io->scsiio.sense_data,&msg_info.scsi.sense_data,
784 sizeof(io->scsiio.sense_data));
789 /* Preformed on Originating SC, SER_ONLY mode */
791 io = msg_info.hdr.original_sc;
793 printf("%s: Major Bummer\n", __func__);
797 printf("pOrig %x\n",(int) ctsio);
800 io->io_hdr.msg_type = CTL_MSG_R2R;
801 io->io_hdr.serializing_sc = msg_info.hdr.serializing_sc;
806 * Performed on Serializing(i.e. primary SC) SC in SER_ONLY
808 * Performed on the Originating (i.e. secondary) SC in XFER
811 case CTL_MSG_FINISH_IO:
812 if (ctl_softc->ha_mode == CTL_HA_MODE_XFER)
813 ctl_isc_handler_finish_xfer(ctl_softc,
816 ctl_isc_handler_finish_ser_only(ctl_softc,
820 /* Preformed on Originating SC */
821 case CTL_MSG_BAD_JUJU:
822 io = msg_info.hdr.original_sc;
824 printf("%s: Bad JUJU!, original_sc is NULL!\n",
828 ctl_copy_sense_data(&msg_info, io);
830 * IO should have already been cleaned up on other
831 * SC so clear this flag so we won't send a message
832 * back to finish the IO there.
834 io->io_hdr.flags &= ~CTL_FLAG_SENT_2OTHER_SC;
835 io->io_hdr.flags |= CTL_FLAG_IO_ACTIVE;
837 /* io = msg_info.hdr.serializing_sc; */
838 io->io_hdr.msg_type = CTL_MSG_BAD_JUJU;
842 /* Handle resets sent from the other side */
843 case CTL_MSG_MANAGE_TASKS: {
844 struct ctl_taskio *taskio;
845 taskio = (struct ctl_taskio *)ctl_alloc_io(
846 (void *)ctl_softc->othersc_pool);
847 if (taskio == NULL) {
848 printf("ctl_isc_event_handler: can't allocate "
851 /* should I just call the proper reset func
855 ctl_zero_io((union ctl_io *)taskio);
856 taskio->io_hdr.io_type = CTL_IO_TASK;
857 taskio->io_hdr.flags |= CTL_FLAG_FROM_OTHER_SC;
858 taskio->io_hdr.nexus = msg_info.hdr.nexus;
859 taskio->task_action = msg_info.task.task_action;
860 taskio->tag_num = msg_info.task.tag_num;
861 taskio->tag_type = msg_info.task.tag_type;
863 taskio->io_hdr.start_time = time_uptime;
864 getbintime(&taskio->io_hdr.start_bt);
866 cs_prof_gettime(&taskio->io_hdr.start_ticks);
868 #endif /* CTL_TIME_IO */
869 ctl_run_task((union ctl_io *)taskio);
872 /* Persistent Reserve action which needs attention */
873 case CTL_MSG_PERS_ACTION:
874 presio = (struct ctl_prio *)ctl_alloc_io(
875 (void *)ctl_softc->othersc_pool);
876 if (presio == NULL) {
877 printf("ctl_isc_event_handler: can't allocate "
880 /* Need to set busy and send msg back */
883 ctl_zero_io((union ctl_io *)presio);
884 presio->io_hdr.msg_type = CTL_MSG_PERS_ACTION;
885 presio->pr_msg = msg_info.pr;
886 ctl_enqueue_isc((union ctl_io *)presio);
888 case CTL_MSG_SYNC_FE:
891 case CTL_MSG_APS_LOCK: {
892 // It's quicker to execute this then to
895 struct ctl_page_index *page_index;
896 struct copan_aps_subpage *current_sp;
899 targ_lun = msg_info.hdr.nexus.targ_mapped_lun;
900 lun = ctl_softc->ctl_luns[targ_lun];
901 mtx_lock(&lun->lun_lock);
902 page_index = &lun->mode_pages.index[index_to_aps_page];
903 current_sp = (struct copan_aps_subpage *)
904 (page_index->page_data +
905 (page_index->page_len * CTL_PAGE_CURRENT));
907 current_sp->lock_active = msg_info.aps.lock_flag;
908 mtx_unlock(&lun->lun_lock);
912 printf("How did I get here?\n");
914 } else if (event == CTL_HA_EVT_MSG_SENT) {
915 if (param != CTL_HA_STATUS_SUCCESS) {
916 printf("Bad status from ctl_ha_msg_send status %d\n",
920 } else if (event == CTL_HA_EVT_DISCONNECT) {
921 printf("CTL: Got a disconnect from Isc\n");
924 printf("ctl_isc_event_handler: Unknown event %d\n", event);
933 ctl_copy_sense_data(union ctl_ha_msg *src, union ctl_io *dest)
935 struct scsi_sense_data *sense;
937 sense = &dest->scsiio.sense_data;
938 bcopy(&src->scsi.sense_data, sense, sizeof(*sense));
939 dest->scsiio.scsi_status = src->scsi.scsi_status;
940 dest->scsiio.sense_len = src->scsi.sense_len;
941 dest->io_hdr.status = src->hdr.status;
947 struct ctl_softc *softc;
948 struct ctl_io_pool *internal_pool, *emergency_pool, *other_pool;
949 struct ctl_port *port;
951 int i, error, retval;
958 control_softc = malloc(sizeof(*control_softc), M_DEVBUF,
960 softc = control_softc;
962 softc->dev = make_dev(&ctl_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600,
965 softc->dev->si_drv1 = softc;
968 * By default, return a "bad LUN" peripheral qualifier for unknown
969 * LUNs. The user can override this default using the tunable or
970 * sysctl. See the comment in ctl_inquiry_std() for more details.
972 softc->inquiry_pq_no_lun = 1;
973 TUNABLE_INT_FETCH("kern.cam.ctl.inquiry_pq_no_lun",
974 &softc->inquiry_pq_no_lun);
975 sysctl_ctx_init(&softc->sysctl_ctx);
976 softc->sysctl_tree = SYSCTL_ADD_NODE(&softc->sysctl_ctx,
977 SYSCTL_STATIC_CHILDREN(_kern_cam), OID_AUTO, "ctl",
978 CTLFLAG_RD, 0, "CAM Target Layer");
980 if (softc->sysctl_tree == NULL) {
981 printf("%s: unable to allocate sysctl tree\n", __func__);
982 destroy_dev(softc->dev);
983 free(control_softc, M_DEVBUF);
984 control_softc = NULL;
988 SYSCTL_ADD_INT(&softc->sysctl_ctx,
989 SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
990 "inquiry_pq_no_lun", CTLFLAG_RW,
991 &softc->inquiry_pq_no_lun, 0,
992 "Report no lun possible for invalid LUNs");
994 mtx_init(&softc->ctl_lock, "CTL mutex", NULL, MTX_DEF);
995 mtx_init(&softc->pool_lock, "CTL pool mutex", NULL, MTX_DEF);
996 softc->open_count = 0;
999 * Default to actually sending a SYNCHRONIZE CACHE command down to
1002 softc->flags = CTL_FLAG_REAL_SYNC;
1005 * In Copan's HA scheme, the "master" and "slave" roles are
1006 * figured out through the slot the controller is in. Although it
1007 * is an active/active system, someone has to be in charge.
1010 scmicro_rw(SCMICRO_GET_SHELF_ID, &sc_id);
1014 softc->flags |= CTL_FLAG_MASTER_SHELF;
1017 persis_offset = CTL_MAX_INITIATORS;
1020 * XXX KDM need to figure out where we want to get our target ID
1021 * and WWID. Is it different on each port?
1023 softc->target.id = 0;
1024 softc->target.wwid[0] = 0x12345678;
1025 softc->target.wwid[1] = 0x87654321;
1026 STAILQ_INIT(&softc->lun_list);
1027 STAILQ_INIT(&softc->pending_lun_queue);
1028 STAILQ_INIT(&softc->fe_list);
1029 STAILQ_INIT(&softc->port_list);
1030 STAILQ_INIT(&softc->be_list);
1031 STAILQ_INIT(&softc->io_pools);
1032 ctl_tpc_init(softc);
1034 if (ctl_pool_create(softc, CTL_POOL_INTERNAL, CTL_POOL_ENTRIES_INTERNAL,
1035 &internal_pool)!= 0){
1036 printf("ctl: can't allocate %d entry internal pool, "
1037 "exiting\n", CTL_POOL_ENTRIES_INTERNAL);
1041 if (ctl_pool_create(softc, CTL_POOL_EMERGENCY,
1042 CTL_POOL_ENTRIES_EMERGENCY, &emergency_pool) != 0) {
1043 printf("ctl: can't allocate %d entry emergency pool, "
1044 "exiting\n", CTL_POOL_ENTRIES_EMERGENCY);
1045 ctl_pool_free(internal_pool);
1049 if (ctl_pool_create(softc, CTL_POOL_4OTHERSC, CTL_POOL_ENTRIES_OTHER_SC,
1052 printf("ctl: can't allocate %d entry other SC pool, "
1053 "exiting\n", CTL_POOL_ENTRIES_OTHER_SC);
1054 ctl_pool_free(internal_pool);
1055 ctl_pool_free(emergency_pool);
1059 softc->internal_pool = internal_pool;
1060 softc->emergency_pool = emergency_pool;
1061 softc->othersc_pool = other_pool;
1063 if (worker_threads <= 0)
1064 worker_threads = max(1, mp_ncpus / 4);
1065 if (worker_threads > CTL_MAX_THREADS)
1066 worker_threads = CTL_MAX_THREADS;
1068 for (i = 0; i < worker_threads; i++) {
1069 struct ctl_thread *thr = &softc->threads[i];
1071 mtx_init(&thr->queue_lock, "CTL queue mutex", NULL, MTX_DEF);
1072 thr->ctl_softc = softc;
1073 STAILQ_INIT(&thr->incoming_queue);
1074 STAILQ_INIT(&thr->rtr_queue);
1075 STAILQ_INIT(&thr->done_queue);
1076 STAILQ_INIT(&thr->isc_queue);
1078 error = kproc_kthread_add(ctl_work_thread, thr,
1079 &softc->ctl_proc, &thr->thread, 0, 0, "ctl", "work%d", i);
1081 printf("error creating CTL work thread!\n");
1082 ctl_pool_free(internal_pool);
1083 ctl_pool_free(emergency_pool);
1084 ctl_pool_free(other_pool);
1088 error = kproc_kthread_add(ctl_lun_thread, softc,
1089 &softc->ctl_proc, NULL, 0, 0, "ctl", "lun");
1091 printf("error creating CTL lun thread!\n");
1092 ctl_pool_free(internal_pool);
1093 ctl_pool_free(emergency_pool);
1094 ctl_pool_free(other_pool);
1098 printf("ctl: CAM Target Layer loaded\n");
1101 * Initialize the ioctl front end.
1103 ctl_frontend_register(&ioctl_frontend);
1104 port = &softc->ioctl_info.port;
1105 port->frontend = &ioctl_frontend;
1106 sprintf(softc->ioctl_info.port_name, "ioctl");
1107 port->port_type = CTL_PORT_IOCTL;
1108 port->num_requested_ctl_io = 100;
1109 port->port_name = softc->ioctl_info.port_name;
1110 port->port_online = ctl_ioctl_online;
1111 port->port_offline = ctl_ioctl_offline;
1112 port->onoff_arg = &softc->ioctl_info;
1113 port->lun_enable = ctl_ioctl_lun_enable;
1114 port->lun_disable = ctl_ioctl_lun_disable;
1115 port->targ_lun_arg = &softc->ioctl_info;
1116 port->fe_datamove = ctl_ioctl_datamove;
1117 port->fe_done = ctl_ioctl_done;
1118 port->max_targets = 15;
1119 port->max_target_id = 15;
1121 if (ctl_port_register(&softc->ioctl_info.port,
1122 (softc->flags & CTL_FLAG_MASTER_SHELF)) != 0) {
1123 printf("ctl: ioctl front end registration failed, will "
1124 "continue anyway\n");
1128 if (sizeof(struct callout) > CTL_TIMER_BYTES) {
1129 printf("sizeof(struct callout) %zd > CTL_TIMER_BYTES %zd\n",
1130 sizeof(struct callout), CTL_TIMER_BYTES);
1133 #endif /* CTL_IO_DELAY */
1141 struct ctl_softc *softc;
1142 struct ctl_lun *lun, *next_lun;
1143 struct ctl_io_pool *pool;
1145 softc = (struct ctl_softc *)control_softc;
1147 if (ctl_port_deregister(&softc->ioctl_info.port) != 0)
1148 printf("ctl: ioctl front end deregistration failed\n");
1150 mtx_lock(&softc->ctl_lock);
1155 for (lun = STAILQ_FIRST(&softc->lun_list); lun != NULL; lun = next_lun){
1156 next_lun = STAILQ_NEXT(lun, links);
1160 mtx_unlock(&softc->ctl_lock);
1162 ctl_frontend_deregister(&ioctl_frontend);
1165 * This will rip the rug out from under any FETDs or anyone else
1166 * that has a pool allocated. Since we increment our module
1167 * refcount any time someone outside the main CTL module allocates
1168 * a pool, we shouldn't have any problems here. The user won't be
1169 * able to unload the CTL module until client modules have
1170 * successfully unloaded.
1172 while ((pool = STAILQ_FIRST(&softc->io_pools)) != NULL)
1173 ctl_pool_free(pool);
1176 ctl_shutdown_thread(softc->work_thread);
1177 mtx_destroy(&softc->queue_lock);
1180 ctl_tpc_shutdown(softc);
1181 mtx_destroy(&softc->pool_lock);
1182 mtx_destroy(&softc->ctl_lock);
1184 destroy_dev(softc->dev);
1186 sysctl_ctx_free(&softc->sysctl_ctx);
1188 free(control_softc, M_DEVBUF);
1189 control_softc = NULL;
1192 printf("ctl: CAM Target Layer unloaded\n");
1196 ctl_module_event_handler(module_t mod, int what, void *arg)
1201 return (ctl_init());
1205 return (EOPNOTSUPP);
1210 * XXX KDM should we do some access checks here? Bump a reference count to
1211 * prevent a CTL module from being unloaded while someone has it open?
1214 ctl_open(struct cdev *dev, int flags, int fmt, struct thread *td)
1220 ctl_close(struct cdev *dev, int flags, int fmt, struct thread *td)
1226 ctl_port_enable(ctl_port_type port_type)
1228 struct ctl_softc *softc;
1229 struct ctl_port *port;
1231 if (ctl_is_single == 0) {
1232 union ctl_ha_msg msg_info;
1236 printf("%s: HA mode, synchronizing frontend enable\n",
1239 msg_info.hdr.msg_type = CTL_MSG_SYNC_FE;
1240 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_info,
1241 sizeof(msg_info), 1 )) > CTL_HA_STATUS_SUCCESS) {
1242 printf("Sync msg send error retval %d\n", isc_retval);
1244 if (!rcv_sync_msg) {
1245 isc_retval=ctl_ha_msg_recv(CTL_HA_CHAN_CTL, &msg_info,
1246 sizeof(msg_info), 1);
1249 printf("CTL:Frontend Enable\n");
1251 printf("%s: single mode, skipping frontend synchronization\n",
1256 softc = control_softc;
1258 STAILQ_FOREACH(port, &softc->port_list, links) {
1259 if (port_type & port->port_type)
1262 printf("port %d\n", port->targ_port);
1264 ctl_port_online(port);
1272 ctl_port_disable(ctl_port_type port_type)
1274 struct ctl_softc *softc;
1275 struct ctl_port *port;
1277 softc = control_softc;
1279 STAILQ_FOREACH(port, &softc->port_list, links) {
1280 if (port_type & port->port_type)
1281 ctl_port_offline(port);
1288 * Returns 0 for success, 1 for failure.
1289 * Currently the only failure mode is if there aren't enough entries
1290 * allocated. So, in case of a failure, look at num_entries_dropped,
1291 * reallocate and try again.
1294 ctl_port_list(struct ctl_port_entry *entries, int num_entries_alloced,
1295 int *num_entries_filled, int *num_entries_dropped,
1296 ctl_port_type port_type, int no_virtual)
1298 struct ctl_softc *softc;
1299 struct ctl_port *port;
1300 int entries_dropped, entries_filled;
1304 softc = control_softc;
1308 entries_dropped = 0;
1311 mtx_lock(&softc->ctl_lock);
1312 STAILQ_FOREACH(port, &softc->port_list, links) {
1313 struct ctl_port_entry *entry;
1315 if ((port->port_type & port_type) == 0)
1318 if ((no_virtual != 0)
1319 && (port->virtual_port != 0))
1322 if (entries_filled >= num_entries_alloced) {
1326 entry = &entries[i];
1328 entry->port_type = port->port_type;
1329 strlcpy(entry->port_name, port->port_name,
1330 sizeof(entry->port_name));
1331 entry->physical_port = port->physical_port;
1332 entry->virtual_port = port->virtual_port;
1333 entry->wwnn = port->wwnn;
1334 entry->wwpn = port->wwpn;
1340 mtx_unlock(&softc->ctl_lock);
1342 if (entries_dropped > 0)
1345 *num_entries_dropped = entries_dropped;
1346 *num_entries_filled = entries_filled;
1352 ctl_ioctl_online(void *arg)
1354 struct ctl_ioctl_info *ioctl_info;
1356 ioctl_info = (struct ctl_ioctl_info *)arg;
1358 ioctl_info->flags |= CTL_IOCTL_FLAG_ENABLED;
1362 ctl_ioctl_offline(void *arg)
1364 struct ctl_ioctl_info *ioctl_info;
1366 ioctl_info = (struct ctl_ioctl_info *)arg;
1368 ioctl_info->flags &= ~CTL_IOCTL_FLAG_ENABLED;
1372 * Remove an initiator by port number and initiator ID.
1373 * Returns 0 for success, -1 for failure.
1376 ctl_remove_initiator(struct ctl_port *port, int iid)
1378 struct ctl_softc *softc = control_softc;
1380 mtx_assert(&softc->ctl_lock, MA_NOTOWNED);
1382 if (iid > CTL_MAX_INIT_PER_PORT) {
1383 printf("%s: initiator ID %u > maximun %u!\n",
1384 __func__, iid, CTL_MAX_INIT_PER_PORT);
1388 mtx_lock(&softc->ctl_lock);
1389 port->wwpn_iid[iid].in_use--;
1390 port->wwpn_iid[iid].last_use = time_uptime;
1391 mtx_unlock(&softc->ctl_lock);
1397 * Add an initiator to the initiator map.
1398 * Returns iid for success, < 0 for failure.
1401 ctl_add_initiator(struct ctl_port *port, int iid, uint64_t wwpn, char *name)
1403 struct ctl_softc *softc = control_softc;
1407 mtx_assert(&softc->ctl_lock, MA_NOTOWNED);
1409 if (iid >= CTL_MAX_INIT_PER_PORT) {
1410 printf("%s: WWPN %#jx initiator ID %u > maximum %u!\n",
1411 __func__, wwpn, iid, CTL_MAX_INIT_PER_PORT);
1416 mtx_lock(&softc->ctl_lock);
1418 if (iid < 0 && (wwpn != 0 || name != NULL)) {
1419 for (i = 0; i < CTL_MAX_INIT_PER_PORT; i++) {
1420 if (wwpn != 0 && wwpn == port->wwpn_iid[i].wwpn) {
1424 if (name != NULL && port->wwpn_iid[i].name != NULL &&
1425 strcmp(name, port->wwpn_iid[i].name) == 0) {
1433 for (i = 0; i < CTL_MAX_INIT_PER_PORT; i++) {
1434 if (port->wwpn_iid[i].in_use == 0 &&
1435 port->wwpn_iid[i].wwpn == 0 &&
1436 port->wwpn_iid[i].name == NULL) {
1445 best_time = INT32_MAX;
1446 for (i = 0; i < CTL_MAX_INIT_PER_PORT; i++) {
1447 if (port->wwpn_iid[i].in_use == 0) {
1448 if (port->wwpn_iid[i].last_use < best_time) {
1450 best_time = port->wwpn_iid[i].last_use;
1458 mtx_unlock(&softc->ctl_lock);
1463 if (port->wwpn_iid[iid].in_use > 0 && (wwpn != 0 || name != NULL)) {
1465 * This is not an error yet.
1467 if (wwpn != 0 && wwpn == port->wwpn_iid[iid].wwpn) {
1469 printf("%s: port %d iid %u WWPN %#jx arrived"
1470 " again\n", __func__, port->targ_port,
1471 iid, (uintmax_t)wwpn);
1475 if (name != NULL && port->wwpn_iid[iid].name != NULL &&
1476 strcmp(name, port->wwpn_iid[iid].name) == 0) {
1478 printf("%s: port %d iid %u name '%s' arrived"
1479 " again\n", __func__, port->targ_port,
1486 * This is an error, but what do we do about it? The
1487 * driver is telling us we have a new WWPN for this
1488 * initiator ID, so we pretty much need to use it.
1490 printf("%s: port %d iid %u WWPN %#jx '%s' arrived,"
1491 " but WWPN %#jx '%s' is still at that address\n",
1492 __func__, port->targ_port, iid, wwpn, name,
1493 (uintmax_t)port->wwpn_iid[iid].wwpn,
1494 port->wwpn_iid[iid].name);
1497 * XXX KDM clear have_ca and ua_pending on each LUN for
1502 free(port->wwpn_iid[iid].name, M_CTL);
1503 port->wwpn_iid[iid].name = name;
1504 port->wwpn_iid[iid].wwpn = wwpn;
1505 port->wwpn_iid[iid].in_use++;
1506 mtx_unlock(&softc->ctl_lock);
1512 ctl_create_iid(struct ctl_port *port, int iid, uint8_t *buf)
1516 switch (port->port_type) {
1519 struct scsi_transportid_fcp *id =
1520 (struct scsi_transportid_fcp *)buf;
1521 if (port->wwpn_iid[iid].wwpn == 0)
1523 memset(id, 0, sizeof(*id));
1524 id->format_protocol = SCSI_PROTO_FC;
1525 scsi_u64to8b(port->wwpn_iid[iid].wwpn, id->n_port_name);
1526 return (sizeof(*id));
1528 case CTL_PORT_ISCSI:
1530 struct scsi_transportid_iscsi_port *id =
1531 (struct scsi_transportid_iscsi_port *)buf;
1532 if (port->wwpn_iid[iid].name == NULL)
1535 id->format_protocol = SCSI_TRN_ISCSI_FORMAT_PORT |
1537 len = strlcpy(id->iscsi_name, port->wwpn_iid[iid].name, 252) + 1;
1538 len = roundup2(min(len, 252), 4);
1539 scsi_ulto2b(len, id->additional_length);
1540 return (sizeof(*id) + len);
1544 struct scsi_transportid_sas *id =
1545 (struct scsi_transportid_sas *)buf;
1546 if (port->wwpn_iid[iid].wwpn == 0)
1548 memset(id, 0, sizeof(*id));
1549 id->format_protocol = SCSI_PROTO_SAS;
1550 scsi_u64to8b(port->wwpn_iid[iid].wwpn, id->sas_address);
1551 return (sizeof(*id));
1555 struct scsi_transportid_spi *id =
1556 (struct scsi_transportid_spi *)buf;
1557 memset(id, 0, sizeof(*id));
1558 id->format_protocol = SCSI_PROTO_SPI;
1559 scsi_ulto2b(iid, id->scsi_addr);
1560 scsi_ulto2b(port->targ_port, id->rel_trgt_port_id);
1561 return (sizeof(*id));
1567 ctl_ioctl_lun_enable(void *arg, struct ctl_id targ_id, int lun_id)
1573 ctl_ioctl_lun_disable(void *arg, struct ctl_id targ_id, int lun_id)
1579 * Data movement routine for the CTL ioctl frontend port.
1582 ctl_ioctl_do_datamove(struct ctl_scsiio *ctsio)
1584 struct ctl_sg_entry *ext_sglist, *kern_sglist;
1585 struct ctl_sg_entry ext_entry, kern_entry;
1586 int ext_sglen, ext_sg_entries, kern_sg_entries;
1587 int ext_sg_start, ext_offset;
1588 int len_to_copy, len_copied;
1589 int kern_watermark, ext_watermark;
1590 int ext_sglist_malloced;
1593 ext_sglist_malloced = 0;
1597 CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove\n"));
1600 * If this flag is set, fake the data transfer.
1602 if (ctsio->io_hdr.flags & CTL_FLAG_NO_DATAMOVE) {
1603 ctsio->ext_data_filled = ctsio->ext_data_len;
1608 * To simplify things here, if we have a single buffer, stick it in
1609 * a S/G entry and just make it a single entry S/G list.
1611 if (ctsio->io_hdr.flags & CTL_FLAG_EDPTR_SGLIST) {
1614 ext_sglen = ctsio->ext_sg_entries * sizeof(*ext_sglist);
1616 ext_sglist = (struct ctl_sg_entry *)malloc(ext_sglen, M_CTL,
1618 ext_sglist_malloced = 1;
1619 if (copyin(ctsio->ext_data_ptr, ext_sglist,
1621 ctl_set_internal_failure(ctsio,
1626 ext_sg_entries = ctsio->ext_sg_entries;
1628 for (i = 0; i < ext_sg_entries; i++) {
1629 if ((len_seen + ext_sglist[i].len) >=
1630 ctsio->ext_data_filled) {
1632 ext_offset = ctsio->ext_data_filled - len_seen;
1635 len_seen += ext_sglist[i].len;
1638 ext_sglist = &ext_entry;
1639 ext_sglist->addr = ctsio->ext_data_ptr;
1640 ext_sglist->len = ctsio->ext_data_len;
1643 ext_offset = ctsio->ext_data_filled;
1646 if (ctsio->kern_sg_entries > 0) {
1647 kern_sglist = (struct ctl_sg_entry *)ctsio->kern_data_ptr;
1648 kern_sg_entries = ctsio->kern_sg_entries;
1650 kern_sglist = &kern_entry;
1651 kern_sglist->addr = ctsio->kern_data_ptr;
1652 kern_sglist->len = ctsio->kern_data_len;
1653 kern_sg_entries = 1;
1658 ext_watermark = ext_offset;
1660 for (i = ext_sg_start, j = 0;
1661 i < ext_sg_entries && j < kern_sg_entries;) {
1662 uint8_t *ext_ptr, *kern_ptr;
1664 len_to_copy = ctl_min(ext_sglist[i].len - ext_watermark,
1665 kern_sglist[j].len - kern_watermark);
1667 ext_ptr = (uint8_t *)ext_sglist[i].addr;
1668 ext_ptr = ext_ptr + ext_watermark;
1669 if (ctsio->io_hdr.flags & CTL_FLAG_BUS_ADDR) {
1673 panic("need to implement bus address support");
1675 kern_ptr = bus_to_virt(kern_sglist[j].addr);
1678 kern_ptr = (uint8_t *)kern_sglist[j].addr;
1679 kern_ptr = kern_ptr + kern_watermark;
1681 kern_watermark += len_to_copy;
1682 ext_watermark += len_to_copy;
1684 if ((ctsio->io_hdr.flags & CTL_FLAG_DATA_MASK) ==
1686 CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: copying %d "
1687 "bytes to user\n", len_to_copy));
1688 CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: from %p "
1689 "to %p\n", kern_ptr, ext_ptr));
1690 if (copyout(kern_ptr, ext_ptr, len_to_copy) != 0) {
1691 ctl_set_internal_failure(ctsio,
1697 CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: copying %d "
1698 "bytes from user\n", len_to_copy));
1699 CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: from %p "
1700 "to %p\n", ext_ptr, kern_ptr));
1701 if (copyin(ext_ptr, kern_ptr, len_to_copy)!= 0){
1702 ctl_set_internal_failure(ctsio,
1709 len_copied += len_to_copy;
1711 if (ext_sglist[i].len == ext_watermark) {
1716 if (kern_sglist[j].len == kern_watermark) {
1722 ctsio->ext_data_filled += len_copied;
1724 CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: ext_sg_entries: %d, "
1725 "kern_sg_entries: %d\n", ext_sg_entries,
1727 CTL_DEBUG_PRINT(("ctl_ioctl_do_datamove: ext_data_len = %d, "
1728 "kern_data_len = %d\n", ctsio->ext_data_len,
1729 ctsio->kern_data_len));
1732 /* XXX KDM set residual?? */
1735 if (ext_sglist_malloced != 0)
1736 free(ext_sglist, M_CTL);
1738 return (CTL_RETVAL_COMPLETE);
1742 * Serialize a command that went down the "wrong" side, and so was sent to
1743 * this controller for execution. The logic is a little different than the
1744 * standard case in ctl_scsiio_precheck(). Errors in this case need to get
1745 * sent back to the other side, but in the success case, we execute the
1746 * command on this side (XFER mode) or tell the other side to execute it
1750 ctl_serialize_other_sc_cmd(struct ctl_scsiio *ctsio)
1752 struct ctl_softc *ctl_softc;
1753 union ctl_ha_msg msg_info;
1754 struct ctl_lun *lun;
1758 ctl_softc = control_softc;
1760 targ_lun = ctsio->io_hdr.nexus.targ_mapped_lun;
1761 lun = ctl_softc->ctl_luns[targ_lun];
1765 * Why isn't LUN defined? The other side wouldn't
1766 * send a cmd if the LUN is undefined.
1768 printf("%s: Bad JUJU!, LUN is NULL!\n", __func__);
1770 /* "Logical unit not supported" */
1771 ctl_set_sense_data(&msg_info.scsi.sense_data,
1773 /*sense_format*/SSD_TYPE_NONE,
1774 /*current_error*/ 1,
1775 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST,
1780 msg_info.scsi.sense_len = SSD_FULL_SIZE;
1781 msg_info.scsi.scsi_status = SCSI_STATUS_CHECK_COND;
1782 msg_info.hdr.status = CTL_SCSI_ERROR | CTL_AUTOSENSE;
1783 msg_info.hdr.original_sc = ctsio->io_hdr.original_sc;
1784 msg_info.hdr.serializing_sc = NULL;
1785 msg_info.hdr.msg_type = CTL_MSG_BAD_JUJU;
1786 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_info,
1787 sizeof(msg_info), 0 ) > CTL_HA_STATUS_SUCCESS) {
1793 mtx_lock(&lun->lun_lock);
1794 TAILQ_INSERT_TAIL(&lun->ooa_queue, &ctsio->io_hdr, ooa_links);
1796 switch (ctl_check_ooa(lun, (union ctl_io *)ctsio,
1797 (union ctl_io *)TAILQ_PREV(&ctsio->io_hdr, ctl_ooaq,
1799 case CTL_ACTION_BLOCK:
1800 ctsio->io_hdr.flags |= CTL_FLAG_BLOCKED;
1801 TAILQ_INSERT_TAIL(&lun->blocked_queue, &ctsio->io_hdr,
1804 case CTL_ACTION_PASS:
1805 case CTL_ACTION_SKIP:
1806 if (ctl_softc->ha_mode == CTL_HA_MODE_XFER) {
1807 ctsio->io_hdr.flags |= CTL_FLAG_IS_WAS_ON_RTR;
1808 ctl_enqueue_rtr((union ctl_io *)ctsio);
1811 /* send msg back to other side */
1812 msg_info.hdr.original_sc = ctsio->io_hdr.original_sc;
1813 msg_info.hdr.serializing_sc = (union ctl_io *)ctsio;
1814 msg_info.hdr.msg_type = CTL_MSG_R2R;
1816 printf("2. pOrig %x\n", (int)msg_info.hdr.original_sc);
1818 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_info,
1819 sizeof(msg_info), 0 ) > CTL_HA_STATUS_SUCCESS) {
1823 case CTL_ACTION_OVERLAP:
1824 /* OVERLAPPED COMMANDS ATTEMPTED */
1825 ctl_set_sense_data(&msg_info.scsi.sense_data,
1827 /*sense_format*/SSD_TYPE_NONE,
1828 /*current_error*/ 1,
1829 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST,
1834 msg_info.scsi.sense_len = SSD_FULL_SIZE;
1835 msg_info.scsi.scsi_status = SCSI_STATUS_CHECK_COND;
1836 msg_info.hdr.status = CTL_SCSI_ERROR | CTL_AUTOSENSE;
1837 msg_info.hdr.original_sc = ctsio->io_hdr.original_sc;
1838 msg_info.hdr.serializing_sc = NULL;
1839 msg_info.hdr.msg_type = CTL_MSG_BAD_JUJU;
1841 printf("BAD JUJU:Major Bummer Overlap\n");
1843 TAILQ_REMOVE(&lun->ooa_queue, &ctsio->io_hdr, ooa_links);
1845 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_info,
1846 sizeof(msg_info), 0 ) > CTL_HA_STATUS_SUCCESS) {
1849 case CTL_ACTION_OVERLAP_TAG:
1850 /* TAGGED OVERLAPPED COMMANDS (NN = QUEUE TAG) */
1851 ctl_set_sense_data(&msg_info.scsi.sense_data,
1853 /*sense_format*/SSD_TYPE_NONE,
1854 /*current_error*/ 1,
1855 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST,
1857 /*ascq*/ ctsio->tag_num & 0xff,
1860 msg_info.scsi.sense_len = SSD_FULL_SIZE;
1861 msg_info.scsi.scsi_status = SCSI_STATUS_CHECK_COND;
1862 msg_info.hdr.status = CTL_SCSI_ERROR | CTL_AUTOSENSE;
1863 msg_info.hdr.original_sc = ctsio->io_hdr.original_sc;
1864 msg_info.hdr.serializing_sc = NULL;
1865 msg_info.hdr.msg_type = CTL_MSG_BAD_JUJU;
1867 printf("BAD JUJU:Major Bummer Overlap Tag\n");
1869 TAILQ_REMOVE(&lun->ooa_queue, &ctsio->io_hdr, ooa_links);
1871 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_info,
1872 sizeof(msg_info), 0 ) > CTL_HA_STATUS_SUCCESS) {
1875 case CTL_ACTION_ERROR:
1877 /* "Internal target failure" */
1878 ctl_set_sense_data(&msg_info.scsi.sense_data,
1880 /*sense_format*/SSD_TYPE_NONE,
1881 /*current_error*/ 1,
1882 /*sense_key*/ SSD_KEY_HARDWARE_ERROR,
1887 msg_info.scsi.sense_len = SSD_FULL_SIZE;
1888 msg_info.scsi.scsi_status = SCSI_STATUS_CHECK_COND;
1889 msg_info.hdr.status = CTL_SCSI_ERROR | CTL_AUTOSENSE;
1890 msg_info.hdr.original_sc = ctsio->io_hdr.original_sc;
1891 msg_info.hdr.serializing_sc = NULL;
1892 msg_info.hdr.msg_type = CTL_MSG_BAD_JUJU;
1894 printf("BAD JUJU:Major Bummer HW Error\n");
1896 TAILQ_REMOVE(&lun->ooa_queue, &ctsio->io_hdr, ooa_links);
1898 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_info,
1899 sizeof(msg_info), 0 ) > CTL_HA_STATUS_SUCCESS) {
1903 mtx_unlock(&lun->lun_lock);
1908 ctl_ioctl_submit_wait(union ctl_io *io)
1910 struct ctl_fe_ioctl_params params;
1911 ctl_fe_ioctl_state last_state;
1916 bzero(¶ms, sizeof(params));
1918 mtx_init(¶ms.ioctl_mtx, "ctliocmtx", NULL, MTX_DEF);
1919 cv_init(¶ms.sem, "ctlioccv");
1920 params.state = CTL_IOCTL_INPROG;
1921 last_state = params.state;
1923 io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ¶ms;
1925 CTL_DEBUG_PRINT(("ctl_ioctl_submit_wait\n"));
1927 /* This shouldn't happen */
1928 if ((retval = ctl_queue(io)) != CTL_RETVAL_COMPLETE)
1934 mtx_lock(¶ms.ioctl_mtx);
1936 * Check the state here, and don't sleep if the state has
1937 * already changed (i.e. wakeup has already occured, but we
1938 * weren't waiting yet).
1940 if (params.state == last_state) {
1941 /* XXX KDM cv_wait_sig instead? */
1942 cv_wait(¶ms.sem, ¶ms.ioctl_mtx);
1944 last_state = params.state;
1946 switch (params.state) {
1947 case CTL_IOCTL_INPROG:
1948 /* Why did we wake up? */
1949 /* XXX KDM error here? */
1950 mtx_unlock(¶ms.ioctl_mtx);
1952 case CTL_IOCTL_DATAMOVE:
1953 CTL_DEBUG_PRINT(("got CTL_IOCTL_DATAMOVE\n"));
1956 * change last_state back to INPROG to avoid
1957 * deadlock on subsequent data moves.
1959 params.state = last_state = CTL_IOCTL_INPROG;
1961 mtx_unlock(¶ms.ioctl_mtx);
1962 ctl_ioctl_do_datamove(&io->scsiio);
1964 * Note that in some cases, most notably writes,
1965 * this will queue the I/O and call us back later.
1966 * In other cases, generally reads, this routine
1967 * will immediately call back and wake us up,
1968 * probably using our own context.
1970 io->scsiio.be_move_done(io);
1972 case CTL_IOCTL_DONE:
1973 mtx_unlock(¶ms.ioctl_mtx);
1974 CTL_DEBUG_PRINT(("got CTL_IOCTL_DONE\n"));
1978 mtx_unlock(¶ms.ioctl_mtx);
1979 /* XXX KDM error here? */
1982 } while (done == 0);
1984 mtx_destroy(¶ms.ioctl_mtx);
1985 cv_destroy(¶ms.sem);
1987 return (CTL_RETVAL_COMPLETE);
1991 ctl_ioctl_datamove(union ctl_io *io)
1993 struct ctl_fe_ioctl_params *params;
1995 params = (struct ctl_fe_ioctl_params *)
1996 io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr;
1998 mtx_lock(¶ms->ioctl_mtx);
1999 params->state = CTL_IOCTL_DATAMOVE;
2000 cv_broadcast(¶ms->sem);
2001 mtx_unlock(¶ms->ioctl_mtx);
2005 ctl_ioctl_done(union ctl_io *io)
2007 struct ctl_fe_ioctl_params *params;
2009 params = (struct ctl_fe_ioctl_params *)
2010 io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr;
2012 mtx_lock(¶ms->ioctl_mtx);
2013 params->state = CTL_IOCTL_DONE;
2014 cv_broadcast(¶ms->sem);
2015 mtx_unlock(¶ms->ioctl_mtx);
2019 ctl_ioctl_hard_startstop_callback(void *arg, struct cfi_metatask *metatask)
2021 struct ctl_fe_ioctl_startstop_info *sd_info;
2023 sd_info = (struct ctl_fe_ioctl_startstop_info *)arg;
2025 sd_info->hs_info.status = metatask->status;
2026 sd_info->hs_info.total_luns = metatask->taskinfo.startstop.total_luns;
2027 sd_info->hs_info.luns_complete =
2028 metatask->taskinfo.startstop.luns_complete;
2029 sd_info->hs_info.luns_failed = metatask->taskinfo.startstop.luns_failed;
2031 cv_broadcast(&sd_info->sem);
2035 ctl_ioctl_bbrread_callback(void *arg, struct cfi_metatask *metatask)
2037 struct ctl_fe_ioctl_bbrread_info *fe_bbr_info;
2039 fe_bbr_info = (struct ctl_fe_ioctl_bbrread_info *)arg;
2041 mtx_lock(fe_bbr_info->lock);
2042 fe_bbr_info->bbr_info->status = metatask->status;
2043 fe_bbr_info->bbr_info->bbr_status = metatask->taskinfo.bbrread.status;
2044 fe_bbr_info->wakeup_done = 1;
2045 mtx_unlock(fe_bbr_info->lock);
2047 cv_broadcast(&fe_bbr_info->sem);
2051 * Returns 0 for success, errno for failure.
2054 ctl_ioctl_fill_ooa(struct ctl_lun *lun, uint32_t *cur_fill_num,
2055 struct ctl_ooa *ooa_hdr, struct ctl_ooa_entry *kern_entries)
2062 mtx_lock(&lun->lun_lock);
2063 for (io = (union ctl_io *)TAILQ_FIRST(&lun->ooa_queue); (io != NULL);
2064 (*cur_fill_num)++, io = (union ctl_io *)TAILQ_NEXT(&io->io_hdr,
2066 struct ctl_ooa_entry *entry;
2069 * If we've got more than we can fit, just count the
2070 * remaining entries.
2072 if (*cur_fill_num >= ooa_hdr->alloc_num)
2075 entry = &kern_entries[*cur_fill_num];
2077 entry->tag_num = io->scsiio.tag_num;
2078 entry->lun_num = lun->lun;
2080 entry->start_bt = io->io_hdr.start_bt;
2082 bcopy(io->scsiio.cdb, entry->cdb, io->scsiio.cdb_len);
2083 entry->cdb_len = io->scsiio.cdb_len;
2084 if (io->io_hdr.flags & CTL_FLAG_BLOCKED)
2085 entry->cmd_flags |= CTL_OOACMD_FLAG_BLOCKED;
2087 if (io->io_hdr.flags & CTL_FLAG_DMA_INPROG)
2088 entry->cmd_flags |= CTL_OOACMD_FLAG_DMA;
2090 if (io->io_hdr.flags & CTL_FLAG_ABORT)
2091 entry->cmd_flags |= CTL_OOACMD_FLAG_ABORT;
2093 if (io->io_hdr.flags & CTL_FLAG_IS_WAS_ON_RTR)
2094 entry->cmd_flags |= CTL_OOACMD_FLAG_RTR;
2096 if (io->io_hdr.flags & CTL_FLAG_DMA_QUEUED)
2097 entry->cmd_flags |= CTL_OOACMD_FLAG_DMA_QUEUED;
2099 mtx_unlock(&lun->lun_lock);
2105 ctl_copyin_alloc(void *user_addr, int len, char *error_str,
2106 size_t error_str_len)
2110 kptr = malloc(len, M_CTL, M_WAITOK | M_ZERO);
2112 if (copyin(user_addr, kptr, len) != 0) {
2113 snprintf(error_str, error_str_len, "Error copying %d bytes "
2114 "from user address %p to kernel address %p", len,
2124 ctl_free_args(int num_args, struct ctl_be_arg *args)
2131 for (i = 0; i < num_args; i++) {
2132 free(args[i].kname, M_CTL);
2133 free(args[i].kvalue, M_CTL);
2139 static struct ctl_be_arg *
2140 ctl_copyin_args(int num_args, struct ctl_be_arg *uargs,
2141 char *error_str, size_t error_str_len)
2143 struct ctl_be_arg *args;
2146 args = ctl_copyin_alloc(uargs, num_args * sizeof(*args),
2147 error_str, error_str_len);
2152 for (i = 0; i < num_args; i++) {
2153 args[i].kname = NULL;
2154 args[i].kvalue = NULL;
2157 for (i = 0; i < num_args; i++) {
2160 args[i].kname = ctl_copyin_alloc(args[i].name,
2161 args[i].namelen, error_str, error_str_len);
2162 if (args[i].kname == NULL)
2165 if (args[i].kname[args[i].namelen - 1] != '\0') {
2166 snprintf(error_str, error_str_len, "Argument %d "
2167 "name is not NUL-terminated", i);
2171 if (args[i].flags & CTL_BEARG_RD) {
2172 tmpptr = ctl_copyin_alloc(args[i].value,
2173 args[i].vallen, error_str, error_str_len);
2176 if ((args[i].flags & CTL_BEARG_ASCII)
2177 && (tmpptr[args[i].vallen - 1] != '\0')) {
2178 snprintf(error_str, error_str_len, "Argument "
2179 "%d value is not NUL-terminated", i);
2182 args[i].kvalue = tmpptr;
2184 args[i].kvalue = malloc(args[i].vallen,
2185 M_CTL, M_WAITOK | M_ZERO);
2192 ctl_free_args(num_args, args);
2198 ctl_copyout_args(int num_args, struct ctl_be_arg *args)
2202 for (i = 0; i < num_args; i++) {
2203 if (args[i].flags & CTL_BEARG_WR)
2204 copyout(args[i].kvalue, args[i].value, args[i].vallen);
2209 * Escape characters that are illegal or not recommended in XML.
2212 ctl_sbuf_printf_esc(struct sbuf *sb, char *str)
2218 for (; *str; str++) {
2221 retval = sbuf_printf(sb, "&");
2224 retval = sbuf_printf(sb, ">");
2227 retval = sbuf_printf(sb, "<");
2230 retval = sbuf_putc(sb, *str);
2243 ctl_ioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
2246 struct ctl_softc *softc;
2249 softc = control_softc;
2259 * If we haven't been "enabled", don't allow any SCSI I/O
2262 if ((softc->ioctl_info.flags & CTL_IOCTL_FLAG_ENABLED) == 0) {
2267 io = ctl_alloc_io(softc->ioctl_info.port.ctl_pool_ref);
2269 printf("ctl_ioctl: can't allocate ctl_io!\n");
2275 * Need to save the pool reference so it doesn't get
2276 * spammed by the user's ctl_io.
2278 pool_tmp = io->io_hdr.pool;
2280 memcpy(io, (void *)addr, sizeof(*io));
2282 io->io_hdr.pool = pool_tmp;
2284 * No status yet, so make sure the status is set properly.
2286 io->io_hdr.status = CTL_STATUS_NONE;
2289 * The user sets the initiator ID, target and LUN IDs.
2291 io->io_hdr.nexus.targ_port = softc->ioctl_info.port.targ_port;
2292 io->io_hdr.flags |= CTL_FLAG_USER_REQ;
2293 if ((io->io_hdr.io_type == CTL_IO_SCSI)
2294 && (io->scsiio.tag_type != CTL_TAG_UNTAGGED))
2295 io->scsiio.tag_num = softc->ioctl_info.cur_tag_num++;
2297 retval = ctl_ioctl_submit_wait(io);
2304 memcpy((void *)addr, io, sizeof(*io));
2306 /* return this to our pool */
2311 case CTL_ENABLE_PORT:
2312 case CTL_DISABLE_PORT:
2313 case CTL_SET_PORT_WWNS: {
2314 struct ctl_port *port;
2315 struct ctl_port_entry *entry;
2317 entry = (struct ctl_port_entry *)addr;
2319 mtx_lock(&softc->ctl_lock);
2320 STAILQ_FOREACH(port, &softc->port_list, links) {
2326 if ((entry->port_type == CTL_PORT_NONE)
2327 && (entry->targ_port == port->targ_port)) {
2329 * If the user only wants to enable or
2330 * disable or set WWNs on a specific port,
2331 * do the operation and we're done.
2335 } else if (entry->port_type & port->port_type) {
2337 * Compare the user's type mask with the
2338 * particular frontend type to see if we
2345 * Make sure the user isn't trying to set
2346 * WWNs on multiple ports at the same time.
2348 if (cmd == CTL_SET_PORT_WWNS) {
2349 printf("%s: Can't set WWNs on "
2350 "multiple ports\n", __func__);
2357 * XXX KDM we have to drop the lock here,
2358 * because the online/offline operations
2359 * can potentially block. We need to
2360 * reference count the frontends so they
2363 mtx_unlock(&softc->ctl_lock);
2365 if (cmd == CTL_ENABLE_PORT) {
2366 struct ctl_lun *lun;
2368 STAILQ_FOREACH(lun, &softc->lun_list,
2370 port->lun_enable(port->targ_lun_arg,
2375 ctl_port_online(port);
2376 } else if (cmd == CTL_DISABLE_PORT) {
2377 struct ctl_lun *lun;
2379 ctl_port_offline(port);
2381 STAILQ_FOREACH(lun, &softc->lun_list,
2390 mtx_lock(&softc->ctl_lock);
2392 if (cmd == CTL_SET_PORT_WWNS)
2393 ctl_port_set_wwns(port,
2394 (entry->flags & CTL_PORT_WWNN_VALID) ?
2396 (entry->flags & CTL_PORT_WWPN_VALID) ?
2397 1 : 0, entry->wwpn);
2402 mtx_unlock(&softc->ctl_lock);
2405 case CTL_GET_PORT_LIST: {
2406 struct ctl_port *port;
2407 struct ctl_port_list *list;
2410 list = (struct ctl_port_list *)addr;
2412 if (list->alloc_len != (list->alloc_num *
2413 sizeof(struct ctl_port_entry))) {
2414 printf("%s: CTL_GET_PORT_LIST: alloc_len %u != "
2415 "alloc_num %u * sizeof(struct ctl_port_entry) "
2416 "%zu\n", __func__, list->alloc_len,
2417 list->alloc_num, sizeof(struct ctl_port_entry));
2423 list->dropped_num = 0;
2425 mtx_lock(&softc->ctl_lock);
2426 STAILQ_FOREACH(port, &softc->port_list, links) {
2427 struct ctl_port_entry entry, *list_entry;
2429 if (list->fill_num >= list->alloc_num) {
2430 list->dropped_num++;
2434 entry.port_type = port->port_type;
2435 strlcpy(entry.port_name, port->port_name,
2436 sizeof(entry.port_name));
2437 entry.targ_port = port->targ_port;
2438 entry.physical_port = port->physical_port;
2439 entry.virtual_port = port->virtual_port;
2440 entry.wwnn = port->wwnn;
2441 entry.wwpn = port->wwpn;
2442 if (port->status & CTL_PORT_STATUS_ONLINE)
2447 list_entry = &list->entries[i];
2449 retval = copyout(&entry, list_entry, sizeof(entry));
2451 printf("%s: CTL_GET_PORT_LIST: copyout "
2452 "returned %d\n", __func__, retval);
2457 list->fill_len += sizeof(entry);
2459 mtx_unlock(&softc->ctl_lock);
2462 * If this is non-zero, we had a copyout fault, so there's
2463 * probably no point in attempting to set the status inside
2469 if (list->dropped_num > 0)
2470 list->status = CTL_PORT_LIST_NEED_MORE_SPACE;
2472 list->status = CTL_PORT_LIST_OK;
2475 case CTL_DUMP_OOA: {
2476 struct ctl_lun *lun;
2481 mtx_lock(&softc->ctl_lock);
2482 printf("Dumping OOA queues:\n");
2483 STAILQ_FOREACH(lun, &softc->lun_list, links) {
2484 mtx_lock(&lun->lun_lock);
2485 for (io = (union ctl_io *)TAILQ_FIRST(
2486 &lun->ooa_queue); io != NULL;
2487 io = (union ctl_io *)TAILQ_NEXT(&io->io_hdr,
2489 sbuf_new(&sb, printbuf, sizeof(printbuf),
2491 sbuf_printf(&sb, "LUN %jd tag 0x%04x%s%s%s%s: ",
2495 CTL_FLAG_BLOCKED) ? "" : " BLOCKED",
2497 CTL_FLAG_DMA_INPROG) ? " DMA" : "",
2499 CTL_FLAG_ABORT) ? " ABORT" : "",
2501 CTL_FLAG_IS_WAS_ON_RTR) ? " RTR" : "");
2502 ctl_scsi_command_string(&io->scsiio, NULL, &sb);
2504 printf("%s\n", sbuf_data(&sb));
2506 mtx_unlock(&lun->lun_lock);
2508 printf("OOA queues dump done\n");
2509 mtx_unlock(&softc->ctl_lock);
2513 struct ctl_lun *lun;
2514 struct ctl_ooa *ooa_hdr;
2515 struct ctl_ooa_entry *entries;
2516 uint32_t cur_fill_num;
2518 ooa_hdr = (struct ctl_ooa *)addr;
2520 if ((ooa_hdr->alloc_len == 0)
2521 || (ooa_hdr->alloc_num == 0)) {
2522 printf("%s: CTL_GET_OOA: alloc len %u and alloc num %u "
2523 "must be non-zero\n", __func__,
2524 ooa_hdr->alloc_len, ooa_hdr->alloc_num);
2529 if (ooa_hdr->alloc_len != (ooa_hdr->alloc_num *
2530 sizeof(struct ctl_ooa_entry))) {
2531 printf("%s: CTL_GET_OOA: alloc len %u must be alloc "
2532 "num %d * sizeof(struct ctl_ooa_entry) %zd\n",
2533 __func__, ooa_hdr->alloc_len,
2534 ooa_hdr->alloc_num,sizeof(struct ctl_ooa_entry));
2539 entries = malloc(ooa_hdr->alloc_len, M_CTL, M_WAITOK | M_ZERO);
2540 if (entries == NULL) {
2541 printf("%s: could not allocate %d bytes for OOA "
2542 "dump\n", __func__, ooa_hdr->alloc_len);
2547 mtx_lock(&softc->ctl_lock);
2548 if (((ooa_hdr->flags & CTL_OOA_FLAG_ALL_LUNS) == 0)
2549 && ((ooa_hdr->lun_num >= CTL_MAX_LUNS)
2550 || (softc->ctl_luns[ooa_hdr->lun_num] == NULL))) {
2551 mtx_unlock(&softc->ctl_lock);
2552 free(entries, M_CTL);
2553 printf("%s: CTL_GET_OOA: invalid LUN %ju\n",
2554 __func__, (uintmax_t)ooa_hdr->lun_num);
2561 if (ooa_hdr->flags & CTL_OOA_FLAG_ALL_LUNS) {
2562 STAILQ_FOREACH(lun, &softc->lun_list, links) {
2563 retval = ctl_ioctl_fill_ooa(lun, &cur_fill_num,
2569 mtx_unlock(&softc->ctl_lock);
2570 free(entries, M_CTL);
2574 lun = softc->ctl_luns[ooa_hdr->lun_num];
2576 retval = ctl_ioctl_fill_ooa(lun, &cur_fill_num,ooa_hdr,
2579 mtx_unlock(&softc->ctl_lock);
2581 ooa_hdr->fill_num = min(cur_fill_num, ooa_hdr->alloc_num);
2582 ooa_hdr->fill_len = ooa_hdr->fill_num *
2583 sizeof(struct ctl_ooa_entry);
2584 retval = copyout(entries, ooa_hdr->entries, ooa_hdr->fill_len);
2586 printf("%s: error copying out %d bytes for OOA dump\n",
2587 __func__, ooa_hdr->fill_len);
2590 getbintime(&ooa_hdr->cur_bt);
2592 if (cur_fill_num > ooa_hdr->alloc_num) {
2593 ooa_hdr->dropped_num = cur_fill_num -ooa_hdr->alloc_num;
2594 ooa_hdr->status = CTL_OOA_NEED_MORE_SPACE;
2596 ooa_hdr->dropped_num = 0;
2597 ooa_hdr->status = CTL_OOA_OK;
2600 free(entries, M_CTL);
2603 case CTL_CHECK_OOA: {
2605 struct ctl_lun *lun;
2606 struct ctl_ooa_info *ooa_info;
2609 ooa_info = (struct ctl_ooa_info *)addr;
2611 if (ooa_info->lun_id >= CTL_MAX_LUNS) {
2612 ooa_info->status = CTL_OOA_INVALID_LUN;
2615 mtx_lock(&softc->ctl_lock);
2616 lun = softc->ctl_luns[ooa_info->lun_id];
2618 mtx_unlock(&softc->ctl_lock);
2619 ooa_info->status = CTL_OOA_INVALID_LUN;
2622 mtx_lock(&lun->lun_lock);
2623 mtx_unlock(&softc->ctl_lock);
2624 ooa_info->num_entries = 0;
2625 for (io = (union ctl_io *)TAILQ_FIRST(&lun->ooa_queue);
2626 io != NULL; io = (union ctl_io *)TAILQ_NEXT(
2627 &io->io_hdr, ooa_links)) {
2628 ooa_info->num_entries++;
2630 mtx_unlock(&lun->lun_lock);
2632 ooa_info->status = CTL_OOA_SUCCESS;
2636 case CTL_HARD_START:
2637 case CTL_HARD_STOP: {
2638 struct ctl_fe_ioctl_startstop_info ss_info;
2639 struct cfi_metatask *metatask;
2642 mtx_init(&hs_mtx, "HS Mutex", NULL, MTX_DEF);
2644 cv_init(&ss_info.sem, "hard start/stop cv" );
2646 metatask = cfi_alloc_metatask(/*can_wait*/ 1);
2647 if (metatask == NULL) {
2649 mtx_destroy(&hs_mtx);
2653 if (cmd == CTL_HARD_START)
2654 metatask->tasktype = CFI_TASK_STARTUP;
2656 metatask->tasktype = CFI_TASK_SHUTDOWN;
2658 metatask->callback = ctl_ioctl_hard_startstop_callback;
2659 metatask->callback_arg = &ss_info;
2661 cfi_action(metatask);
2663 /* Wait for the callback */
2665 cv_wait_sig(&ss_info.sem, &hs_mtx);
2666 mtx_unlock(&hs_mtx);
2669 * All information has been copied from the metatask by the
2670 * time cv_broadcast() is called, so we free the metatask here.
2672 cfi_free_metatask(metatask);
2674 memcpy((void *)addr, &ss_info.hs_info, sizeof(ss_info.hs_info));
2676 mtx_destroy(&hs_mtx);
2680 struct ctl_bbrread_info *bbr_info;
2681 struct ctl_fe_ioctl_bbrread_info fe_bbr_info;
2683 struct cfi_metatask *metatask;
2685 bbr_info = (struct ctl_bbrread_info *)addr;
2687 bzero(&fe_bbr_info, sizeof(fe_bbr_info));
2689 bzero(&bbr_mtx, sizeof(bbr_mtx));
2690 mtx_init(&bbr_mtx, "BBR Mutex", NULL, MTX_DEF);
2692 fe_bbr_info.bbr_info = bbr_info;
2693 fe_bbr_info.lock = &bbr_mtx;
2695 cv_init(&fe_bbr_info.sem, "BBR read cv");
2696 metatask = cfi_alloc_metatask(/*can_wait*/ 1);
2698 if (metatask == NULL) {
2699 mtx_destroy(&bbr_mtx);
2700 cv_destroy(&fe_bbr_info.sem);
2704 metatask->tasktype = CFI_TASK_BBRREAD;
2705 metatask->callback = ctl_ioctl_bbrread_callback;
2706 metatask->callback_arg = &fe_bbr_info;
2707 metatask->taskinfo.bbrread.lun_num = bbr_info->lun_num;
2708 metatask->taskinfo.bbrread.lba = bbr_info->lba;
2709 metatask->taskinfo.bbrread.len = bbr_info->len;
2711 cfi_action(metatask);
2714 while (fe_bbr_info.wakeup_done == 0)
2715 cv_wait_sig(&fe_bbr_info.sem, &bbr_mtx);
2716 mtx_unlock(&bbr_mtx);
2718 bbr_info->status = metatask->status;
2719 bbr_info->bbr_status = metatask->taskinfo.bbrread.status;
2720 bbr_info->scsi_status = metatask->taskinfo.bbrread.scsi_status;
2721 memcpy(&bbr_info->sense_data,
2722 &metatask->taskinfo.bbrread.sense_data,
2723 ctl_min(sizeof(bbr_info->sense_data),
2724 sizeof(metatask->taskinfo.bbrread.sense_data)));
2726 cfi_free_metatask(metatask);
2728 mtx_destroy(&bbr_mtx);
2729 cv_destroy(&fe_bbr_info.sem);
2733 case CTL_DELAY_IO: {
2734 struct ctl_io_delay_info *delay_info;
2736 struct ctl_lun *lun;
2737 #endif /* CTL_IO_DELAY */
2739 delay_info = (struct ctl_io_delay_info *)addr;
2742 mtx_lock(&softc->ctl_lock);
2744 if ((delay_info->lun_id >= CTL_MAX_LUNS)
2745 || (softc->ctl_luns[delay_info->lun_id] == NULL)) {
2746 delay_info->status = CTL_DELAY_STATUS_INVALID_LUN;
2748 lun = softc->ctl_luns[delay_info->lun_id];
2749 mtx_lock(&lun->lun_lock);
2751 delay_info->status = CTL_DELAY_STATUS_OK;
2753 switch (delay_info->delay_type) {
2754 case CTL_DELAY_TYPE_CONT:
2756 case CTL_DELAY_TYPE_ONESHOT:
2759 delay_info->status =
2760 CTL_DELAY_STATUS_INVALID_TYPE;
2764 switch (delay_info->delay_loc) {
2765 case CTL_DELAY_LOC_DATAMOVE:
2766 lun->delay_info.datamove_type =
2767 delay_info->delay_type;
2768 lun->delay_info.datamove_delay =
2769 delay_info->delay_secs;
2771 case CTL_DELAY_LOC_DONE:
2772 lun->delay_info.done_type =
2773 delay_info->delay_type;
2774 lun->delay_info.done_delay =
2775 delay_info->delay_secs;
2778 delay_info->status =
2779 CTL_DELAY_STATUS_INVALID_LOC;
2782 mtx_unlock(&lun->lun_lock);
2785 mtx_unlock(&softc->ctl_lock);
2787 delay_info->status = CTL_DELAY_STATUS_NOT_IMPLEMENTED;
2788 #endif /* CTL_IO_DELAY */
2791 case CTL_REALSYNC_SET: {
2794 syncstate = (int *)addr;
2796 mtx_lock(&softc->ctl_lock);
2797 switch (*syncstate) {
2799 softc->flags &= ~CTL_FLAG_REAL_SYNC;
2802 softc->flags |= CTL_FLAG_REAL_SYNC;
2808 mtx_unlock(&softc->ctl_lock);
2811 case CTL_REALSYNC_GET: {
2814 syncstate = (int*)addr;
2816 mtx_lock(&softc->ctl_lock);
2817 if (softc->flags & CTL_FLAG_REAL_SYNC)
2821 mtx_unlock(&softc->ctl_lock);
2827 struct ctl_sync_info *sync_info;
2828 struct ctl_lun *lun;
2830 sync_info = (struct ctl_sync_info *)addr;
2832 mtx_lock(&softc->ctl_lock);
2833 lun = softc->ctl_luns[sync_info->lun_id];
2835 mtx_unlock(&softc->ctl_lock);
2836 sync_info->status = CTL_GS_SYNC_NO_LUN;
2839 * Get or set the sync interval. We're not bounds checking
2840 * in the set case, hopefully the user won't do something
2843 mtx_lock(&lun->lun_lock);
2844 mtx_unlock(&softc->ctl_lock);
2845 if (cmd == CTL_GETSYNC)
2846 sync_info->sync_interval = lun->sync_interval;
2848 lun->sync_interval = sync_info->sync_interval;
2849 mtx_unlock(&lun->lun_lock);
2851 sync_info->status = CTL_GS_SYNC_OK;
2855 case CTL_GETSTATS: {
2856 struct ctl_stats *stats;
2857 struct ctl_lun *lun;
2860 stats = (struct ctl_stats *)addr;
2862 if ((sizeof(struct ctl_lun_io_stats) * softc->num_luns) >
2864 stats->status = CTL_SS_NEED_MORE_SPACE;
2865 stats->num_luns = softc->num_luns;
2869 * XXX KDM no locking here. If the LUN list changes,
2870 * things can blow up.
2872 for (i = 0, lun = STAILQ_FIRST(&softc->lun_list); lun != NULL;
2873 i++, lun = STAILQ_NEXT(lun, links)) {
2874 retval = copyout(&lun->stats, &stats->lun_stats[i],
2875 sizeof(lun->stats));
2879 stats->num_luns = softc->num_luns;
2880 stats->fill_len = sizeof(struct ctl_lun_io_stats) *
2882 stats->status = CTL_SS_OK;
2884 stats->flags = CTL_STATS_FLAG_TIME_VALID;
2886 stats->flags = CTL_STATS_FLAG_NONE;
2888 getnanouptime(&stats->timestamp);
2891 case CTL_ERROR_INJECT: {
2892 struct ctl_error_desc *err_desc, *new_err_desc;
2893 struct ctl_lun *lun;
2895 err_desc = (struct ctl_error_desc *)addr;
2897 new_err_desc = malloc(sizeof(*new_err_desc), M_CTL,
2899 bcopy(err_desc, new_err_desc, sizeof(*new_err_desc));
2901 mtx_lock(&softc->ctl_lock);
2902 lun = softc->ctl_luns[err_desc->lun_id];
2904 mtx_unlock(&softc->ctl_lock);
2905 free(new_err_desc, M_CTL);
2906 printf("%s: CTL_ERROR_INJECT: invalid LUN %ju\n",
2907 __func__, (uintmax_t)err_desc->lun_id);
2911 mtx_lock(&lun->lun_lock);
2912 mtx_unlock(&softc->ctl_lock);
2915 * We could do some checking here to verify the validity
2916 * of the request, but given the complexity of error
2917 * injection requests, the checking logic would be fairly
2920 * For now, if the request is invalid, it just won't get
2921 * executed and might get deleted.
2923 STAILQ_INSERT_TAIL(&lun->error_list, new_err_desc, links);
2926 * XXX KDM check to make sure the serial number is unique,
2927 * in case we somehow manage to wrap. That shouldn't
2928 * happen for a very long time, but it's the right thing to
2931 new_err_desc->serial = lun->error_serial;
2932 err_desc->serial = lun->error_serial;
2933 lun->error_serial++;
2935 mtx_unlock(&lun->lun_lock);
2938 case CTL_ERROR_INJECT_DELETE: {
2939 struct ctl_error_desc *delete_desc, *desc, *desc2;
2940 struct ctl_lun *lun;
2943 delete_desc = (struct ctl_error_desc *)addr;
2946 mtx_lock(&softc->ctl_lock);
2947 lun = softc->ctl_luns[delete_desc->lun_id];
2949 mtx_unlock(&softc->ctl_lock);
2950 printf("%s: CTL_ERROR_INJECT_DELETE: invalid LUN %ju\n",
2951 __func__, (uintmax_t)delete_desc->lun_id);
2955 mtx_lock(&lun->lun_lock);
2956 mtx_unlock(&softc->ctl_lock);
2957 STAILQ_FOREACH_SAFE(desc, &lun->error_list, links, desc2) {
2958 if (desc->serial != delete_desc->serial)
2961 STAILQ_REMOVE(&lun->error_list, desc, ctl_error_desc,
2966 mtx_unlock(&lun->lun_lock);
2967 if (delete_done == 0) {
2968 printf("%s: CTL_ERROR_INJECT_DELETE: can't find "
2969 "error serial %ju on LUN %u\n", __func__,
2970 delete_desc->serial, delete_desc->lun_id);
2976 case CTL_DUMP_STRUCTS: {
2978 struct ctl_port *port;
2979 struct ctl_frontend *fe;
2981 mtx_lock(&softc->ctl_lock);
2982 printf("CTL Persistent Reservation information start:\n");
2983 for (i = 0; i < CTL_MAX_LUNS; i++) {
2984 struct ctl_lun *lun;
2986 lun = softc->ctl_luns[i];
2989 || ((lun->flags & CTL_LUN_DISABLED) != 0))
2992 for (j = 0; j < (CTL_MAX_PORTS * 2); j++) {
2993 for (k = 0; k < CTL_MAX_INIT_PER_PORT; k++){
2994 idx = j * CTL_MAX_INIT_PER_PORT + k;
2995 if (lun->per_res[idx].registered == 0)
2997 printf(" LUN %d port %d iid %d key "
2999 (uintmax_t)scsi_8btou64(
3000 lun->per_res[idx].res_key.key));
3004 printf("CTL Persistent Reservation information end\n");
3005 printf("CTL Ports:\n");
3006 STAILQ_FOREACH(port, &softc->port_list, links) {
3007 printf(" Port %d '%s' Frontend '%s' Type %u pp %d vp %d WWNN "
3008 "%#jx WWPN %#jx\n", port->targ_port, port->port_name,
3009 port->frontend->name, port->port_type,
3010 port->physical_port, port->virtual_port,
3011 (uintmax_t)port->wwnn, (uintmax_t)port->wwpn);
3012 for (j = 0; j < CTL_MAX_INIT_PER_PORT; j++) {
3013 if (port->wwpn_iid[j].in_use == 0 &&
3014 port->wwpn_iid[j].wwpn == 0 &&
3015 port->wwpn_iid[j].name == NULL)
3018 printf(" iid %u use %d WWPN %#jx '%s'\n",
3019 j, port->wwpn_iid[j].in_use,
3020 (uintmax_t)port->wwpn_iid[j].wwpn,
3021 port->wwpn_iid[j].name);
3024 printf("CTL Port information end\n");
3025 mtx_unlock(&softc->ctl_lock);
3027 * XXX KDM calling this without a lock. We'd likely want
3028 * to drop the lock before calling the frontend's dump
3031 printf("CTL Frontends:\n");
3032 STAILQ_FOREACH(fe, &softc->fe_list, links) {
3033 printf(" Frontend '%s'\n", fe->name);
3034 if (fe->fe_dump != NULL)
3037 printf("CTL Frontend information end\n");
3041 struct ctl_lun_req *lun_req;
3042 struct ctl_backend_driver *backend;
3044 lun_req = (struct ctl_lun_req *)addr;
3046 backend = ctl_backend_find(lun_req->backend);
3047 if (backend == NULL) {
3048 lun_req->status = CTL_LUN_ERROR;
3049 snprintf(lun_req->error_str,
3050 sizeof(lun_req->error_str),
3051 "Backend \"%s\" not found.",
3055 if (lun_req->num_be_args > 0) {
3056 lun_req->kern_be_args = ctl_copyin_args(
3057 lun_req->num_be_args,
3060 sizeof(lun_req->error_str));
3061 if (lun_req->kern_be_args == NULL) {
3062 lun_req->status = CTL_LUN_ERROR;
3067 retval = backend->ioctl(dev, cmd, addr, flag, td);
3069 if (lun_req->num_be_args > 0) {
3070 ctl_copyout_args(lun_req->num_be_args,
3071 lun_req->kern_be_args);
3072 ctl_free_args(lun_req->num_be_args,
3073 lun_req->kern_be_args);
3077 case CTL_LUN_LIST: {
3079 struct ctl_lun *lun;
3080 struct ctl_lun_list *list;
3081 struct ctl_option *opt;
3083 list = (struct ctl_lun_list *)addr;
3086 * Allocate a fixed length sbuf here, based on the length
3087 * of the user's buffer. We could allocate an auto-extending
3088 * buffer, and then tell the user how much larger our
3089 * amount of data is than his buffer, but that presents
3092 * 1. The sbuf(9) routines use a blocking malloc, and so
3093 * we can't hold a lock while calling them with an
3094 * auto-extending buffer.
3096 * 2. There is not currently a LUN reference counting
3097 * mechanism, outside of outstanding transactions on
3098 * the LUN's OOA queue. So a LUN could go away on us
3099 * while we're getting the LUN number, backend-specific
3100 * information, etc. Thus, given the way things
3101 * currently work, we need to hold the CTL lock while
3102 * grabbing LUN information.
3104 * So, from the user's standpoint, the best thing to do is
3105 * allocate what he thinks is a reasonable buffer length,
3106 * and then if he gets a CTL_LUN_LIST_NEED_MORE_SPACE error,
3107 * double the buffer length and try again. (And repeat
3108 * that until he succeeds.)
3110 sb = sbuf_new(NULL, NULL, list->alloc_len, SBUF_FIXEDLEN);
3112 list->status = CTL_LUN_LIST_ERROR;
3113 snprintf(list->error_str, sizeof(list->error_str),
3114 "Unable to allocate %d bytes for LUN list",
3119 sbuf_printf(sb, "<ctllunlist>\n");
3121 mtx_lock(&softc->ctl_lock);
3122 STAILQ_FOREACH(lun, &softc->lun_list, links) {
3123 mtx_lock(&lun->lun_lock);
3124 retval = sbuf_printf(sb, "<lun id=\"%ju\">\n",
3125 (uintmax_t)lun->lun);
3128 * Bail out as soon as we see that we've overfilled
3134 retval = sbuf_printf(sb, "\t<backend_type>%s"
3135 "</backend_type>\n",
3136 (lun->backend == NULL) ? "none" :
3137 lun->backend->name);
3142 retval = sbuf_printf(sb, "\t<lun_type>%d</lun_type>\n",
3143 lun->be_lun->lun_type);
3148 if (lun->backend == NULL) {
3149 retval = sbuf_printf(sb, "</lun>\n");
3155 retval = sbuf_printf(sb, "\t<size>%ju</size>\n",
3156 (lun->be_lun->maxlba > 0) ?
3157 lun->be_lun->maxlba + 1 : 0);
3162 retval = sbuf_printf(sb, "\t<blocksize>%u</blocksize>\n",
3163 lun->be_lun->blocksize);
3168 retval = sbuf_printf(sb, "\t<serial_number>");
3173 retval = ctl_sbuf_printf_esc(sb,
3174 lun->be_lun->serial_num);
3179 retval = sbuf_printf(sb, "</serial_number>\n");
3184 retval = sbuf_printf(sb, "\t<device_id>");
3189 retval = ctl_sbuf_printf_esc(sb,lun->be_lun->device_id);
3194 retval = sbuf_printf(sb, "</device_id>\n");
3199 if (lun->backend->lun_info != NULL) {
3200 retval = lun->backend->lun_info(lun->be_lun->be_lun, sb);
3204 STAILQ_FOREACH(opt, &lun->be_lun->options, links) {
3205 retval = sbuf_printf(sb, "\t<%s>%s</%s>\n",
3206 opt->name, opt->value, opt->name);
3211 retval = sbuf_printf(sb, "</lun>\n");
3215 mtx_unlock(&lun->lun_lock);
3218 mtx_unlock(&lun->lun_lock);
3219 mtx_unlock(&softc->ctl_lock);
3222 || ((retval = sbuf_printf(sb, "</ctllunlist>\n")) != 0)) {
3225 list->status = CTL_LUN_LIST_NEED_MORE_SPACE;
3226 snprintf(list->error_str, sizeof(list->error_str),
3227 "Out of space, %d bytes is too small",
3234 retval = copyout(sbuf_data(sb), list->lun_xml,
3237 list->fill_len = sbuf_len(sb) + 1;
3238 list->status = CTL_LUN_LIST_OK;
3243 struct ctl_iscsi *ci;
3244 struct ctl_frontend *fe;
3246 ci = (struct ctl_iscsi *)addr;
3248 fe = ctl_frontend_find("iscsi");
3250 ci->status = CTL_ISCSI_ERROR;
3251 snprintf(ci->error_str, sizeof(ci->error_str),
3252 "Frontend \"iscsi\" not found.");
3256 retval = fe->ioctl(dev, cmd, addr, flag, td);
3259 case CTL_PORT_REQ: {
3260 struct ctl_req *req;
3261 struct ctl_frontend *fe;
3263 req = (struct ctl_req *)addr;
3265 fe = ctl_frontend_find(req->driver);
3267 req->status = CTL_LUN_ERROR;
3268 snprintf(req->error_str, sizeof(req->error_str),
3269 "Frontend \"%s\" not found.", req->driver);
3272 if (req->num_args > 0) {
3273 req->kern_args = ctl_copyin_args(req->num_args,
3274 req->args, req->error_str, sizeof(req->error_str));
3275 if (req->kern_args == NULL) {
3276 req->status = CTL_LUN_ERROR;
3281 retval = fe->ioctl(dev, cmd, addr, flag, td);
3283 if (req->num_args > 0) {
3284 ctl_copyout_args(req->num_args, req->kern_args);
3285 ctl_free_args(req->num_args, req->kern_args);
3289 case CTL_PORT_LIST: {
3291 struct ctl_port *port;
3292 struct ctl_lun_list *list;
3293 struct ctl_option *opt;
3295 list = (struct ctl_lun_list *)addr;
3297 sb = sbuf_new(NULL, NULL, list->alloc_len, SBUF_FIXEDLEN);
3299 list->status = CTL_LUN_LIST_ERROR;
3300 snprintf(list->error_str, sizeof(list->error_str),
3301 "Unable to allocate %d bytes for LUN list",
3306 sbuf_printf(sb, "<ctlportlist>\n");
3308 mtx_lock(&softc->ctl_lock);
3309 STAILQ_FOREACH(port, &softc->port_list, links) {
3310 retval = sbuf_printf(sb, "<targ_port id=\"%ju\">\n",
3311 (uintmax_t)port->targ_port);
3314 * Bail out as soon as we see that we've overfilled
3320 retval = sbuf_printf(sb, "\t<frontend_type>%s"
3321 "</frontend_type>\n", port->frontend->name);
3325 retval = sbuf_printf(sb, "\t<port_type>%d</port_type>\n",
3330 retval = sbuf_printf(sb, "\t<online>%s</online>\n",
3331 (port->status & CTL_PORT_STATUS_ONLINE) ? "YES" : "NO");
3335 retval = sbuf_printf(sb, "\t<port_name>%s</port_name>\n",
3340 retval = sbuf_printf(sb, "\t<physical_port>%d</physical_port>\n",
3341 port->physical_port);
3345 retval = sbuf_printf(sb, "\t<virtual_port>%d</virtual_port>\n",
3346 port->virtual_port);
3350 retval = sbuf_printf(sb, "\t<wwnn>%#jx</wwnn>\n",
3351 (uintmax_t)port->wwnn);
3355 retval = sbuf_printf(sb, "\t<wwpn>%#jx</wwpn>\n",
3356 (uintmax_t)port->wwpn);
3360 if (port->port_info != NULL) {
3361 retval = port->port_info(port->onoff_arg, sb);
3365 STAILQ_FOREACH(opt, &port->options, links) {
3366 retval = sbuf_printf(sb, "\t<%s>%s</%s>\n",
3367 opt->name, opt->value, opt->name);
3372 retval = sbuf_printf(sb, "</targ_port>\n");
3376 mtx_unlock(&softc->ctl_lock);
3379 || ((retval = sbuf_printf(sb, "</ctlportlist>\n")) != 0)) {
3382 list->status = CTL_LUN_LIST_NEED_MORE_SPACE;
3383 snprintf(list->error_str, sizeof(list->error_str),
3384 "Out of space, %d bytes is too small",
3391 retval = copyout(sbuf_data(sb), list->lun_xml,
3394 list->fill_len = sbuf_len(sb) + 1;
3395 list->status = CTL_LUN_LIST_OK;
3400 /* XXX KDM should we fix this? */
3402 struct ctl_backend_driver *backend;
3409 * We encode the backend type as the ioctl type for backend
3410 * ioctls. So parse it out here, and then search for a
3411 * backend of this type.
3413 type = _IOC_TYPE(cmd);
3415 STAILQ_FOREACH(backend, &softc->be_list, links) {
3416 if (backend->type == type) {
3422 printf("ctl: unknown ioctl command %#lx or backend "
3427 retval = backend->ioctl(dev, cmd, addr, flag, td);
3437 ctl_get_initindex(struct ctl_nexus *nexus)
3439 if (nexus->targ_port < CTL_MAX_PORTS)
3440 return (nexus->initid.id +
3441 (nexus->targ_port * CTL_MAX_INIT_PER_PORT));
3443 return (nexus->initid.id +
3444 ((nexus->targ_port - CTL_MAX_PORTS) *
3445 CTL_MAX_INIT_PER_PORT));
3449 ctl_get_resindex(struct ctl_nexus *nexus)
3451 return (nexus->initid.id + (nexus->targ_port * CTL_MAX_INIT_PER_PORT));
3455 ctl_port_idx(int port_num)
3457 if (port_num < CTL_MAX_PORTS)
3460 return(port_num - CTL_MAX_PORTS);
3464 ctl_map_lun(int port_num, uint32_t lun_id)
3466 struct ctl_port *port;
3468 port = control_softc->ctl_ports[ctl_port_idx(port_num)];
3470 return (UINT32_MAX);
3471 if (port->lun_map == NULL)
3473 return (port->lun_map(port->targ_lun_arg, lun_id));
3477 ctl_map_lun_back(int port_num, uint32_t lun_id)
3479 struct ctl_port *port;
3482 port = control_softc->ctl_ports[ctl_port_idx(port_num)];
3483 if (port->lun_map == NULL)
3485 for (i = 0; i < CTL_MAX_LUNS; i++) {
3486 if (port->lun_map(port->targ_lun_arg, i) == lun_id)
3489 return (UINT32_MAX);
3493 * Note: This only works for bitmask sizes that are at least 32 bits, and
3494 * that are a power of 2.
3497 ctl_ffz(uint32_t *mask, uint32_t size)
3499 uint32_t num_chunks, num_pieces;
3502 num_chunks = (size >> 5);
3503 if (num_chunks == 0)
3505 num_pieces = ctl_min((sizeof(uint32_t) * 8), size);
3507 for (i = 0; i < num_chunks; i++) {
3508 for (j = 0; j < num_pieces; j++) {
3509 if ((mask[i] & (1 << j)) == 0)
3510 return ((i << 5) + j);
3518 ctl_set_mask(uint32_t *mask, uint32_t bit)
3520 uint32_t chunk, piece;
3523 piece = bit % (sizeof(uint32_t) * 8);
3525 if ((mask[chunk] & (1 << piece)) != 0)
3528 mask[chunk] |= (1 << piece);
3534 ctl_clear_mask(uint32_t *mask, uint32_t bit)
3536 uint32_t chunk, piece;
3539 piece = bit % (sizeof(uint32_t) * 8);
3541 if ((mask[chunk] & (1 << piece)) == 0)
3544 mask[chunk] &= ~(1 << piece);
3550 ctl_is_set(uint32_t *mask, uint32_t bit)
3552 uint32_t chunk, piece;
3555 piece = bit % (sizeof(uint32_t) * 8);
3557 if ((mask[chunk] & (1 << piece)) == 0)
3565 * The bus, target and lun are optional, they can be filled in later.
3566 * can_wait is used to determine whether we can wait on the malloc or not.
3569 ctl_malloc_io(ctl_io_type io_type, uint32_t targ_port, uint32_t targ_target,
3570 uint32_t targ_lun, int can_wait)
3575 io = (union ctl_io *)malloc(sizeof(*io), M_CTL, M_WAITOK);
3577 io = (union ctl_io *)malloc(sizeof(*io), M_CTL, M_NOWAIT);
3580 io->io_hdr.io_type = io_type;
3581 io->io_hdr.targ_port = targ_port;
3583 * XXX KDM this needs to change/go away. We need to move
3584 * to a preallocated pool of ctl_scsiio structures.
3586 io->io_hdr.nexus.targ_target.id = targ_target;
3587 io->io_hdr.nexus.targ_lun = targ_lun;
3594 ctl_kfree_io(union ctl_io *io)
3601 * ctl_softc, pool_type, total_ctl_io are passed in.
3602 * npool is passed out.
3605 ctl_pool_create(struct ctl_softc *ctl_softc, ctl_pool_type pool_type,
3606 uint32_t total_ctl_io, struct ctl_io_pool **npool)
3609 union ctl_io *cur_io, *next_io;
3610 struct ctl_io_pool *pool;
3615 pool = (struct ctl_io_pool *)malloc(sizeof(*pool), M_CTL,
3622 pool->type = pool_type;
3623 pool->ctl_softc = ctl_softc;
3625 mtx_lock(&ctl_softc->pool_lock);
3626 pool->id = ctl_softc->cur_pool_id++;
3627 mtx_unlock(&ctl_softc->pool_lock);
3629 pool->flags = CTL_POOL_FLAG_NONE;
3630 pool->refcount = 1; /* Reference for validity. */
3631 STAILQ_INIT(&pool->free_queue);
3634 * XXX KDM other options here:
3635 * - allocate a page at a time
3636 * - allocate one big chunk of memory.
3637 * Page allocation might work well, but would take a little more
3640 for (i = 0; i < total_ctl_io; i++) {
3641 cur_io = (union ctl_io *)malloc(sizeof(*cur_io), M_CTLIO,
3643 if (cur_io == NULL) {
3647 cur_io->io_hdr.pool = pool;
3648 STAILQ_INSERT_TAIL(&pool->free_queue, &cur_io->io_hdr, links);
3649 pool->total_ctl_io++;
3650 pool->free_ctl_io++;
3654 for (cur_io = (union ctl_io *)STAILQ_FIRST(&pool->free_queue);
3655 cur_io != NULL; cur_io = next_io) {
3656 next_io = (union ctl_io *)STAILQ_NEXT(&cur_io->io_hdr,
3658 STAILQ_REMOVE(&pool->free_queue, &cur_io->io_hdr,
3660 free(cur_io, M_CTLIO);
3666 mtx_lock(&ctl_softc->pool_lock);
3667 ctl_softc->num_pools++;
3668 STAILQ_INSERT_TAIL(&ctl_softc->io_pools, pool, links);
3670 * Increment our usage count if this is an external consumer, so we
3671 * can't get unloaded until the external consumer (most likely a
3672 * FETD) unloads and frees his pool.
3674 * XXX KDM will this increment the caller's module use count, or
3678 if ((pool_type != CTL_POOL_EMERGENCY)
3679 && (pool_type != CTL_POOL_INTERNAL)
3680 && (pool_type != CTL_POOL_4OTHERSC))
3684 mtx_unlock(&ctl_softc->pool_lock);
3694 ctl_pool_acquire(struct ctl_io_pool *pool)
3697 mtx_assert(&pool->ctl_softc->pool_lock, MA_OWNED);
3699 if (pool->flags & CTL_POOL_FLAG_INVALID)
3708 ctl_pool_release(struct ctl_io_pool *pool)
3710 struct ctl_softc *ctl_softc = pool->ctl_softc;
3713 mtx_assert(&ctl_softc->pool_lock, MA_OWNED);
3715 if (--pool->refcount != 0)
3718 while ((io = (union ctl_io *)STAILQ_FIRST(&pool->free_queue)) != NULL) {
3719 STAILQ_REMOVE(&pool->free_queue, &io->io_hdr, ctl_io_hdr,
3724 STAILQ_REMOVE(&ctl_softc->io_pools, pool, ctl_io_pool, links);
3725 ctl_softc->num_pools--;
3728 * XXX KDM will this decrement the caller's usage count or mine?
3731 if ((pool->type != CTL_POOL_EMERGENCY)
3732 && (pool->type != CTL_POOL_INTERNAL)
3733 && (pool->type != CTL_POOL_4OTHERSC))
3741 ctl_pool_free(struct ctl_io_pool *pool)
3743 struct ctl_softc *ctl_softc;
3748 ctl_softc = pool->ctl_softc;
3749 mtx_lock(&ctl_softc->pool_lock);
3750 pool->flags |= CTL_POOL_FLAG_INVALID;
3751 ctl_pool_release(pool);
3752 mtx_unlock(&ctl_softc->pool_lock);
3756 * This routine does not block (except for spinlocks of course).
3757 * It tries to allocate a ctl_io union from the caller's pool as quickly as
3761 ctl_alloc_io(void *pool_ref)
3764 struct ctl_softc *ctl_softc;
3765 struct ctl_io_pool *pool, *npool;
3766 struct ctl_io_pool *emergency_pool;
3768 pool = (struct ctl_io_pool *)pool_ref;
3771 printf("%s: pool is NULL\n", __func__);
3775 emergency_pool = NULL;
3777 ctl_softc = pool->ctl_softc;
3779 mtx_lock(&ctl_softc->pool_lock);
3781 * First, try to get the io structure from the user's pool.
3783 if (ctl_pool_acquire(pool) == 0) {
3784 io = (union ctl_io *)STAILQ_FIRST(&pool->free_queue);
3786 STAILQ_REMOVE_HEAD(&pool->free_queue, links);
3787 pool->total_allocated++;
3788 pool->free_ctl_io--;
3789 mtx_unlock(&ctl_softc->pool_lock);
3792 ctl_pool_release(pool);
3795 * If he doesn't have any io structures left, search for an
3796 * emergency pool and grab one from there.
3798 STAILQ_FOREACH(npool, &ctl_softc->io_pools, links) {
3799 if (npool->type != CTL_POOL_EMERGENCY)
3802 if (ctl_pool_acquire(npool) != 0)
3805 emergency_pool = npool;
3807 io = (union ctl_io *)STAILQ_FIRST(&npool->free_queue);
3809 STAILQ_REMOVE_HEAD(&npool->free_queue, links);
3810 npool->total_allocated++;
3811 npool->free_ctl_io--;
3812 mtx_unlock(&ctl_softc->pool_lock);
3815 ctl_pool_release(npool);
3818 /* Drop the spinlock before we malloc */
3819 mtx_unlock(&ctl_softc->pool_lock);
3822 * The emergency pool (if it exists) didn't have one, so try an
3823 * atomic (i.e. nonblocking) malloc and see if we get lucky.
3825 io = (union ctl_io *)malloc(sizeof(*io), M_CTLIO, M_NOWAIT);
3828 * If the emergency pool exists but is empty, add this
3829 * ctl_io to its list when it gets freed.
3831 if (emergency_pool != NULL) {
3832 mtx_lock(&ctl_softc->pool_lock);
3833 if (ctl_pool_acquire(emergency_pool) == 0) {
3834 io->io_hdr.pool = emergency_pool;
3835 emergency_pool->total_ctl_io++;
3837 * Need to bump this, otherwise
3838 * total_allocated and total_freed won't
3839 * match when we no longer have anything
3842 emergency_pool->total_allocated++;
3844 mtx_unlock(&ctl_softc->pool_lock);
3846 io->io_hdr.pool = NULL;
3853 ctl_free_io(union ctl_io *io)
3859 * If this ctl_io has a pool, return it to that pool.
3861 if (io->io_hdr.pool != NULL) {
3862 struct ctl_io_pool *pool;
3864 pool = (struct ctl_io_pool *)io->io_hdr.pool;
3865 mtx_lock(&pool->ctl_softc->pool_lock);
3866 io->io_hdr.io_type = 0xff;
3867 STAILQ_INSERT_TAIL(&pool->free_queue, &io->io_hdr, links);
3868 pool->total_freed++;
3869 pool->free_ctl_io++;
3870 ctl_pool_release(pool);
3871 mtx_unlock(&pool->ctl_softc->pool_lock);
3874 * Otherwise, just free it. We probably malloced it and
3875 * the emergency pool wasn't available.
3883 ctl_zero_io(union ctl_io *io)
3891 * May need to preserve linked list pointers at some point too.
3893 pool_ref = io->io_hdr.pool;
3895 memset(io, 0, sizeof(*io));
3897 io->io_hdr.pool = pool_ref;
3901 * This routine is currently used for internal copies of ctl_ios that need
3902 * to persist for some reason after we've already returned status to the
3903 * FETD. (Thus the flag set.)
3906 * Note that this makes a blind copy of all fields in the ctl_io, except
3907 * for the pool reference. This includes any memory that has been
3908 * allocated! That memory will no longer be valid after done has been
3909 * called, so this would be VERY DANGEROUS for command that actually does
3910 * any reads or writes. Right now (11/7/2005), this is only used for immediate
3911 * start and stop commands, which don't transfer any data, so this is not a
3912 * problem. If it is used for anything else, the caller would also need to
3913 * allocate data buffer space and this routine would need to be modified to
3914 * copy the data buffer(s) as well.
3917 ctl_copy_io(union ctl_io *src, union ctl_io *dest)
3926 * May need to preserve linked list pointers at some point too.
3928 pool_ref = dest->io_hdr.pool;
3930 memcpy(dest, src, ctl_min(sizeof(*src), sizeof(*dest)));
3932 dest->io_hdr.pool = pool_ref;
3934 * We need to know that this is an internal copy, and doesn't need
3935 * to get passed back to the FETD that allocated it.
3937 dest->io_hdr.flags |= CTL_FLAG_INT_COPY;
3942 ctl_update_power_subpage(struct copan_power_subpage *page)
3944 int num_luns, num_partitions, config_type;
3945 struct ctl_softc *softc;
3946 cs_BOOL_t aor_present, shelf_50pct_power;
3947 cs_raidset_personality_t rs_type;
3948 int max_active_luns;
3950 softc = control_softc;
3952 /* subtract out the processor LUN */
3953 num_luns = softc->num_luns - 1;
3955 * Default to 7 LUNs active, which was the only number we allowed
3958 max_active_luns = 7;
3960 num_partitions = config_GetRsPartitionInfo();
3961 config_type = config_GetConfigType();
3962 shelf_50pct_power = config_GetShelfPowerMode();
3963 aor_present = config_IsAorRsPresent();
3965 rs_type = ddb_GetRsRaidType(1);
3966 if ((rs_type != CS_RAIDSET_PERSONALITY_RAID5)
3967 && (rs_type != CS_RAIDSET_PERSONALITY_RAID1)) {
3968 EPRINT(0, "Unsupported RS type %d!", rs_type);
3972 page->total_luns = num_luns;
3974 switch (config_type) {
3977 * In a 40 drive configuration, it doesn't matter what DC
3978 * cards we have, whether we have AOR enabled or not,
3979 * partitioning or not, or what type of RAIDset we have.
3980 * In that scenario, we can power up every LUN we present
3983 max_active_luns = num_luns;
3987 if (shelf_50pct_power == CS_FALSE) {
3989 if (aor_present == CS_TRUE) {
3991 CS_RAIDSET_PERSONALITY_RAID5) {
3992 max_active_luns = 7;
3993 } else if (rs_type ==
3994 CS_RAIDSET_PERSONALITY_RAID1){
3995 max_active_luns = 14;
3997 /* XXX KDM now what?? */
4001 CS_RAIDSET_PERSONALITY_RAID5) {
4002 max_active_luns = 8;
4003 } else if (rs_type ==
4004 CS_RAIDSET_PERSONALITY_RAID1){
4005 max_active_luns = 16;
4007 /* XXX KDM now what?? */
4013 * With 50% power in a 64 drive configuration, we
4014 * can power all LUNs we present.
4016 max_active_luns = num_luns;
4020 if (shelf_50pct_power == CS_FALSE) {
4022 if (aor_present == CS_TRUE) {
4024 CS_RAIDSET_PERSONALITY_RAID5) {
4025 max_active_luns = 7;
4026 } else if (rs_type ==
4027 CS_RAIDSET_PERSONALITY_RAID1){
4028 max_active_luns = 14;
4030 /* XXX KDM now what?? */
4034 CS_RAIDSET_PERSONALITY_RAID5) {
4035 max_active_luns = 8;
4036 } else if (rs_type ==
4037 CS_RAIDSET_PERSONALITY_RAID1){
4038 max_active_luns = 16;
4040 /* XXX KDM now what?? */
4045 if (aor_present == CS_TRUE) {
4047 CS_RAIDSET_PERSONALITY_RAID5) {
4048 max_active_luns = 14;
4049 } else if (rs_type ==
4050 CS_RAIDSET_PERSONALITY_RAID1){
4052 * We're assuming here that disk
4053 * caching is enabled, and so we're
4054 * able to power up half of each
4055 * LUN, and cache all writes.
4057 max_active_luns = num_luns;
4059 /* XXX KDM now what?? */
4063 CS_RAIDSET_PERSONALITY_RAID5) {
4064 max_active_luns = 15;
4065 } else if (rs_type ==
4066 CS_RAIDSET_PERSONALITY_RAID1){
4067 max_active_luns = 30;
4069 /* XXX KDM now what?? */
4076 * In this case, we have an unknown configuration, so we
4077 * just use the default from above.
4082 page->max_active_luns = max_active_luns;
4084 printk("%s: total_luns = %d, max_active_luns = %d\n", __func__,
4085 page->total_luns, page->max_active_luns);
4088 #endif /* NEEDTOPORT */
4091 * This routine could be used in the future to load default and/or saved
4092 * mode page parameters for a particuar lun.
4095 ctl_init_page_index(struct ctl_lun *lun)
4098 struct ctl_page_index *page_index;
4099 struct ctl_softc *softc;
4102 memcpy(&lun->mode_pages.index, page_index_template,
4103 sizeof(page_index_template));
4105 softc = lun->ctl_softc;
4107 for (i = 0; i < CTL_NUM_MODE_PAGES; i++) {
4109 page_index = &lun->mode_pages.index[i];
4111 * If this is a disk-only mode page, there's no point in
4112 * setting it up. For some pages, we have to have some
4113 * basic information about the disk in order to calculate the
4116 if ((lun->be_lun->lun_type != T_DIRECT)
4117 && (page_index->page_flags & CTL_PAGE_FLAG_DISK_ONLY))
4120 switch (page_index->page_code & SMPH_PC_MASK) {
4121 case SMS_FORMAT_DEVICE_PAGE: {
4122 struct scsi_format_page *format_page;
4124 if (page_index->subpage != SMS_SUBPAGE_PAGE_0)
4125 panic("subpage is incorrect!");
4128 * Sectors per track are set above. Bytes per
4129 * sector need to be set here on a per-LUN basis.
4131 memcpy(&lun->mode_pages.format_page[CTL_PAGE_CURRENT],
4132 &format_page_default,
4133 sizeof(format_page_default));
4134 memcpy(&lun->mode_pages.format_page[
4135 CTL_PAGE_CHANGEABLE], &format_page_changeable,
4136 sizeof(format_page_changeable));
4137 memcpy(&lun->mode_pages.format_page[CTL_PAGE_DEFAULT],
4138 &format_page_default,
4139 sizeof(format_page_default));
4140 memcpy(&lun->mode_pages.format_page[CTL_PAGE_SAVED],
4141 &format_page_default,
4142 sizeof(format_page_default));
4144 format_page = &lun->mode_pages.format_page[
4146 scsi_ulto2b(lun->be_lun->blocksize,
4147 format_page->bytes_per_sector);
4149 format_page = &lun->mode_pages.format_page[
4151 scsi_ulto2b(lun->be_lun->blocksize,
4152 format_page->bytes_per_sector);
4154 format_page = &lun->mode_pages.format_page[
4156 scsi_ulto2b(lun->be_lun->blocksize,
4157 format_page->bytes_per_sector);
4159 page_index->page_data =
4160 (uint8_t *)lun->mode_pages.format_page;
4163 case SMS_RIGID_DISK_PAGE: {
4164 struct scsi_rigid_disk_page *rigid_disk_page;
4165 uint32_t sectors_per_cylinder;
4169 #endif /* !__XSCALE__ */
4171 if (page_index->subpage != SMS_SUBPAGE_PAGE_0)
4172 panic("invalid subpage value %d",
4173 page_index->subpage);
4176 * Rotation rate and sectors per track are set
4177 * above. We calculate the cylinders here based on
4178 * capacity. Due to the number of heads and
4179 * sectors per track we're using, smaller arrays
4180 * may turn out to have 0 cylinders. Linux and
4181 * FreeBSD don't pay attention to these mode pages
4182 * to figure out capacity, but Solaris does. It
4183 * seems to deal with 0 cylinders just fine, and
4184 * works out a fake geometry based on the capacity.
4186 memcpy(&lun->mode_pages.rigid_disk_page[
4187 CTL_PAGE_CURRENT], &rigid_disk_page_default,
4188 sizeof(rigid_disk_page_default));
4189 memcpy(&lun->mode_pages.rigid_disk_page[
4190 CTL_PAGE_CHANGEABLE],&rigid_disk_page_changeable,
4191 sizeof(rigid_disk_page_changeable));
4192 memcpy(&lun->mode_pages.rigid_disk_page[
4193 CTL_PAGE_DEFAULT], &rigid_disk_page_default,
4194 sizeof(rigid_disk_page_default));
4195 memcpy(&lun->mode_pages.rigid_disk_page[
4196 CTL_PAGE_SAVED], &rigid_disk_page_default,
4197 sizeof(rigid_disk_page_default));
4199 sectors_per_cylinder = CTL_DEFAULT_SECTORS_PER_TRACK *
4203 * The divide method here will be more accurate,
4204 * probably, but results in floating point being
4205 * used in the kernel on i386 (__udivdi3()). On the
4206 * XScale, though, __udivdi3() is implemented in
4209 * The shift method for cylinder calculation is
4210 * accurate if sectors_per_cylinder is a power of
4211 * 2. Otherwise it might be slightly off -- you
4212 * might have a bit of a truncation problem.
4215 cylinders = (lun->be_lun->maxlba + 1) /
4216 sectors_per_cylinder;
4218 for (shift = 31; shift > 0; shift--) {
4219 if (sectors_per_cylinder & (1 << shift))
4222 cylinders = (lun->be_lun->maxlba + 1) >> shift;
4226 * We've basically got 3 bytes, or 24 bits for the
4227 * cylinder size in the mode page. If we're over,
4228 * just round down to 2^24.
4230 if (cylinders > 0xffffff)
4231 cylinders = 0xffffff;
4233 rigid_disk_page = &lun->mode_pages.rigid_disk_page[
4235 scsi_ulto3b(cylinders, rigid_disk_page->cylinders);
4237 rigid_disk_page = &lun->mode_pages.rigid_disk_page[
4239 scsi_ulto3b(cylinders, rigid_disk_page->cylinders);
4241 rigid_disk_page = &lun->mode_pages.rigid_disk_page[
4243 scsi_ulto3b(cylinders, rigid_disk_page->cylinders);
4245 page_index->page_data =
4246 (uint8_t *)lun->mode_pages.rigid_disk_page;
4249 case SMS_CACHING_PAGE: {
4250 struct scsi_caching_page *caching_page;
4252 if (page_index->subpage != SMS_SUBPAGE_PAGE_0)
4253 panic("invalid subpage value %d",
4254 page_index->subpage);
4255 memcpy(&lun->mode_pages.caching_page[CTL_PAGE_DEFAULT],
4256 &caching_page_default,
4257 sizeof(caching_page_default));
4258 memcpy(&lun->mode_pages.caching_page[
4259 CTL_PAGE_CHANGEABLE], &caching_page_changeable,
4260 sizeof(caching_page_changeable));
4261 memcpy(&lun->mode_pages.caching_page[CTL_PAGE_SAVED],
4262 &caching_page_default,
4263 sizeof(caching_page_default));
4264 caching_page = &lun->mode_pages.caching_page[
4266 value = ctl_get_opt(&lun->be_lun->options, "writecache");
4267 if (value != NULL && strcmp(value, "off") == 0)
4268 caching_page->flags1 &= ~SCP_WCE;
4269 value = ctl_get_opt(&lun->be_lun->options, "readcache");
4270 if (value != NULL && strcmp(value, "off") == 0)
4271 caching_page->flags1 |= SCP_RCD;
4272 memcpy(&lun->mode_pages.caching_page[CTL_PAGE_CURRENT],
4273 &lun->mode_pages.caching_page[CTL_PAGE_SAVED],
4274 sizeof(caching_page_default));
4275 page_index->page_data =
4276 (uint8_t *)lun->mode_pages.caching_page;
4279 case SMS_CONTROL_MODE_PAGE: {
4280 struct scsi_control_page *control_page;
4282 if (page_index->subpage != SMS_SUBPAGE_PAGE_0)
4283 panic("invalid subpage value %d",
4284 page_index->subpage);
4286 memcpy(&lun->mode_pages.control_page[CTL_PAGE_DEFAULT],
4287 &control_page_default,
4288 sizeof(control_page_default));
4289 memcpy(&lun->mode_pages.control_page[
4290 CTL_PAGE_CHANGEABLE], &control_page_changeable,
4291 sizeof(control_page_changeable));
4292 memcpy(&lun->mode_pages.control_page[CTL_PAGE_SAVED],
4293 &control_page_default,
4294 sizeof(control_page_default));
4295 control_page = &lun->mode_pages.control_page[
4297 value = ctl_get_opt(&lun->be_lun->options, "reordering");
4298 if (value != NULL && strcmp(value, "unrestricted") == 0) {
4299 control_page->queue_flags &= ~SCP_QUEUE_ALG_MASK;
4300 control_page->queue_flags |= SCP_QUEUE_ALG_UNRESTRICTED;
4302 memcpy(&lun->mode_pages.control_page[CTL_PAGE_CURRENT],
4303 &lun->mode_pages.control_page[CTL_PAGE_SAVED],
4304 sizeof(control_page_default));
4305 page_index->page_data =
4306 (uint8_t *)lun->mode_pages.control_page;
4310 case SMS_VENDOR_SPECIFIC_PAGE:{
4311 switch (page_index->subpage) {
4312 case PWR_SUBPAGE_CODE: {
4313 struct copan_power_subpage *current_page,
4316 memcpy(&lun->mode_pages.power_subpage[
4318 &power_page_default,
4319 sizeof(power_page_default));
4320 memcpy(&lun->mode_pages.power_subpage[
4321 CTL_PAGE_CHANGEABLE],
4322 &power_page_changeable,
4323 sizeof(power_page_changeable));
4324 memcpy(&lun->mode_pages.power_subpage[
4326 &power_page_default,
4327 sizeof(power_page_default));
4328 memcpy(&lun->mode_pages.power_subpage[
4330 &power_page_default,
4331 sizeof(power_page_default));
4332 page_index->page_data =
4333 (uint8_t *)lun->mode_pages.power_subpage;
4335 current_page = (struct copan_power_subpage *)
4336 (page_index->page_data +
4337 (page_index->page_len *
4339 saved_page = (struct copan_power_subpage *)
4340 (page_index->page_data +
4341 (page_index->page_len *
4345 case APS_SUBPAGE_CODE: {
4346 struct copan_aps_subpage *current_page,
4349 // This gets set multiple times but
4350 // it should always be the same. It's
4351 // only done during init so who cares.
4352 index_to_aps_page = i;
4354 memcpy(&lun->mode_pages.aps_subpage[
4357 sizeof(aps_page_default));
4358 memcpy(&lun->mode_pages.aps_subpage[
4359 CTL_PAGE_CHANGEABLE],
4360 &aps_page_changeable,
4361 sizeof(aps_page_changeable));
4362 memcpy(&lun->mode_pages.aps_subpage[
4365 sizeof(aps_page_default));
4366 memcpy(&lun->mode_pages.aps_subpage[
4369 sizeof(aps_page_default));
4370 page_index->page_data =
4371 (uint8_t *)lun->mode_pages.aps_subpage;
4373 current_page = (struct copan_aps_subpage *)
4374 (page_index->page_data +
4375 (page_index->page_len *
4377 saved_page = (struct copan_aps_subpage *)
4378 (page_index->page_data +
4379 (page_index->page_len *
4383 case DBGCNF_SUBPAGE_CODE: {
4384 struct copan_debugconf_subpage *current_page,
4387 memcpy(&lun->mode_pages.debugconf_subpage[
4389 &debugconf_page_default,
4390 sizeof(debugconf_page_default));
4391 memcpy(&lun->mode_pages.debugconf_subpage[
4392 CTL_PAGE_CHANGEABLE],
4393 &debugconf_page_changeable,
4394 sizeof(debugconf_page_changeable));
4395 memcpy(&lun->mode_pages.debugconf_subpage[
4397 &debugconf_page_default,
4398 sizeof(debugconf_page_default));
4399 memcpy(&lun->mode_pages.debugconf_subpage[
4401 &debugconf_page_default,
4402 sizeof(debugconf_page_default));
4403 page_index->page_data =
4404 (uint8_t *)lun->mode_pages.debugconf_subpage;
4406 current_page = (struct copan_debugconf_subpage *)
4407 (page_index->page_data +
4408 (page_index->page_len *
4410 saved_page = (struct copan_debugconf_subpage *)
4411 (page_index->page_data +
4412 (page_index->page_len *
4417 panic("invalid subpage value %d",
4418 page_index->subpage);
4424 panic("invalid page value %d",
4425 page_index->page_code & SMPH_PC_MASK);
4430 return (CTL_RETVAL_COMPLETE);
4437 * - caller allocates and zeros LUN storage, or passes in a NULL LUN if he
4438 * wants us to allocate the LUN and he can block.
4439 * - ctl_softc is always set
4440 * - be_lun is set if the LUN has a backend (needed for disk LUNs)
4442 * Returns 0 for success, non-zero (errno) for failure.
4445 ctl_alloc_lun(struct ctl_softc *ctl_softc, struct ctl_lun *ctl_lun,
4446 struct ctl_be_lun *const be_lun, struct ctl_id target_id)
4448 struct ctl_lun *nlun, *lun;
4449 struct ctl_port *port;
4450 struct scsi_vpd_id_descriptor *desc;
4451 struct scsi_vpd_id_t10 *t10id;
4452 const char *eui, *naa, *scsiname, *vendor;
4453 int lun_number, i, lun_malloced;
4454 int devidlen, idlen1, idlen2 = 0, len;
4460 * We currently only support Direct Access or Processor LUN types.
4462 switch (be_lun->lun_type) {
4470 be_lun->lun_config_status(be_lun->be_lun,
4471 CTL_LUN_CONFIG_FAILURE);
4474 if (ctl_lun == NULL) {
4475 lun = malloc(sizeof(*lun), M_CTL, M_WAITOK);
4482 memset(lun, 0, sizeof(*lun));
4484 lun->flags = CTL_LUN_MALLOCED;
4486 /* Generate LUN ID. */
4487 devidlen = max(CTL_DEVID_MIN_LEN,
4488 strnlen(be_lun->device_id, CTL_DEVID_LEN));
4489 idlen1 = sizeof(*t10id) + devidlen;
4490 len = sizeof(struct scsi_vpd_id_descriptor) + idlen1;
4491 scsiname = ctl_get_opt(&be_lun->options, "scsiname");
4492 if (scsiname != NULL) {
4493 idlen2 = roundup2(strlen(scsiname) + 1, 4);
4494 len += sizeof(struct scsi_vpd_id_descriptor) + idlen2;
4496 eui = ctl_get_opt(&be_lun->options, "eui");
4498 len += sizeof(struct scsi_vpd_id_descriptor) + 8;
4500 naa = ctl_get_opt(&be_lun->options, "naa");
4502 len += sizeof(struct scsi_vpd_id_descriptor) + 8;
4504 lun->lun_devid = malloc(sizeof(struct ctl_devid) + len,
4505 M_CTL, M_WAITOK | M_ZERO);
4506 lun->lun_devid->len = len;
4507 desc = (struct scsi_vpd_id_descriptor *)lun->lun_devid->data;
4508 desc->proto_codeset = SVPD_ID_CODESET_ASCII;
4509 desc->id_type = SVPD_ID_PIV | SVPD_ID_ASSOC_LUN | SVPD_ID_TYPE_T10;
4510 desc->length = idlen1;
4511 t10id = (struct scsi_vpd_id_t10 *)&desc->identifier[0];
4512 memset(t10id->vendor, ' ', sizeof(t10id->vendor));
4513 if ((vendor = ctl_get_opt(&be_lun->options, "vendor")) == NULL) {
4514 strncpy((char *)t10id->vendor, CTL_VENDOR, sizeof(t10id->vendor));
4516 strncpy(t10id->vendor, vendor,
4517 min(sizeof(t10id->vendor), strlen(vendor)));
4519 strncpy((char *)t10id->vendor_spec_id,
4520 (char *)be_lun->device_id, devidlen);
4521 if (scsiname != NULL) {
4522 desc = (struct scsi_vpd_id_descriptor *)(&desc->identifier[0] +
4524 desc->proto_codeset = SVPD_ID_CODESET_UTF8;
4525 desc->id_type = SVPD_ID_PIV | SVPD_ID_ASSOC_LUN |
4526 SVPD_ID_TYPE_SCSI_NAME;
4527 desc->length = idlen2;
4528 strlcpy(desc->identifier, scsiname, idlen2);
4531 desc = (struct scsi_vpd_id_descriptor *)(&desc->identifier[0] +
4533 desc->proto_codeset = SVPD_ID_CODESET_BINARY;
4534 desc->id_type = SVPD_ID_PIV | SVPD_ID_ASSOC_LUN |
4537 scsi_u64to8b(strtouq(eui, NULL, 0), desc->identifier);
4540 desc = (struct scsi_vpd_id_descriptor *)(&desc->identifier[0] +
4542 desc->proto_codeset = SVPD_ID_CODESET_BINARY;
4543 desc->id_type = SVPD_ID_PIV | SVPD_ID_ASSOC_LUN |
4546 scsi_u64to8b(strtouq(naa, NULL, 0), desc->identifier);
4549 mtx_lock(&ctl_softc->ctl_lock);
4551 * See if the caller requested a particular LUN number. If so, see
4552 * if it is available. Otherwise, allocate the first available LUN.
4554 if (be_lun->flags & CTL_LUN_FLAG_ID_REQ) {
4555 if ((be_lun->req_lun_id > (CTL_MAX_LUNS - 1))
4556 || (ctl_is_set(ctl_softc->ctl_lun_mask, be_lun->req_lun_id))) {
4557 mtx_unlock(&ctl_softc->ctl_lock);
4558 if (be_lun->req_lun_id > (CTL_MAX_LUNS - 1)) {
4559 printf("ctl: requested LUN ID %d is higher "
4560 "than CTL_MAX_LUNS - 1 (%d)\n",
4561 be_lun->req_lun_id, CTL_MAX_LUNS - 1);
4564 * XXX KDM return an error, or just assign
4565 * another LUN ID in this case??
4567 printf("ctl: requested LUN ID %d is already "
4568 "in use\n", be_lun->req_lun_id);
4570 if (lun->flags & CTL_LUN_MALLOCED)
4572 be_lun->lun_config_status(be_lun->be_lun,
4573 CTL_LUN_CONFIG_FAILURE);
4576 lun_number = be_lun->req_lun_id;
4578 lun_number = ctl_ffz(ctl_softc->ctl_lun_mask, CTL_MAX_LUNS);
4579 if (lun_number == -1) {
4580 mtx_unlock(&ctl_softc->ctl_lock);
4581 printf("ctl: can't allocate LUN on target %ju, out of "
4582 "LUNs\n", (uintmax_t)target_id.id);
4583 if (lun->flags & CTL_LUN_MALLOCED)
4585 be_lun->lun_config_status(be_lun->be_lun,
4586 CTL_LUN_CONFIG_FAILURE);
4590 ctl_set_mask(ctl_softc->ctl_lun_mask, lun_number);
4592 mtx_init(&lun->lun_lock, "CTL LUN", NULL, MTX_DEF);
4593 lun->target = target_id;
4594 lun->lun = lun_number;
4595 lun->be_lun = be_lun;
4597 * The processor LUN is always enabled. Disk LUNs come on line
4598 * disabled, and must be enabled by the backend.
4600 lun->flags |= CTL_LUN_DISABLED;
4601 lun->backend = be_lun->be;
4602 be_lun->ctl_lun = lun;
4603 be_lun->lun_id = lun_number;
4604 atomic_add_int(&be_lun->be->num_luns, 1);
4605 if (be_lun->flags & CTL_LUN_FLAG_POWERED_OFF)
4606 lun->flags |= CTL_LUN_STOPPED;
4608 if (be_lun->flags & CTL_LUN_FLAG_INOPERABLE)
4609 lun->flags |= CTL_LUN_INOPERABLE;
4611 if (be_lun->flags & CTL_LUN_FLAG_PRIMARY)
4612 lun->flags |= CTL_LUN_PRIMARY_SC;
4614 lun->ctl_softc = ctl_softc;
4615 TAILQ_INIT(&lun->ooa_queue);
4616 TAILQ_INIT(&lun->blocked_queue);
4617 STAILQ_INIT(&lun->error_list);
4618 ctl_tpc_lun_init(lun);
4621 * Initialize the mode page index.
4623 ctl_init_page_index(lun);
4626 * Set the poweron UA for all initiators on this LUN only.
4628 for (i = 0; i < CTL_MAX_INITIATORS; i++)
4629 lun->pending_ua[i] = CTL_UA_POWERON;
4632 * Now, before we insert this lun on the lun list, set the lun
4633 * inventory changed UA for all other luns.
4635 STAILQ_FOREACH(nlun, &ctl_softc->lun_list, links) {
4636 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
4637 nlun->pending_ua[i] |= CTL_UA_LUN_CHANGE;
4641 STAILQ_INSERT_TAIL(&ctl_softc->lun_list, lun, links);
4643 ctl_softc->ctl_luns[lun_number] = lun;
4645 ctl_softc->num_luns++;
4647 /* Setup statistics gathering */
4648 lun->stats.device_type = be_lun->lun_type;
4649 lun->stats.lun_number = lun_number;
4650 if (lun->stats.device_type == T_DIRECT)
4651 lun->stats.blocksize = be_lun->blocksize;
4653 lun->stats.flags = CTL_LUN_STATS_NO_BLOCKSIZE;
4654 for (i = 0;i < CTL_MAX_PORTS;i++)
4655 lun->stats.ports[i].targ_port = i;
4657 mtx_unlock(&ctl_softc->ctl_lock);
4659 lun->be_lun->lun_config_status(lun->be_lun->be_lun, CTL_LUN_CONFIG_OK);
4662 * Run through each registered FETD and bring it online if it isn't
4663 * already. Enable the target ID if it hasn't been enabled, and
4664 * enable this particular LUN.
4666 STAILQ_FOREACH(port, &ctl_softc->port_list, links) {
4669 retval = port->lun_enable(port->targ_lun_arg, target_id,lun_number);
4671 printf("ctl_alloc_lun: FETD %s port %d returned error "
4672 "%d for lun_enable on target %ju lun %d\n",
4673 port->port_name, port->targ_port, retval,
4674 (uintmax_t)target_id.id, lun_number);
4676 port->status |= CTL_PORT_STATUS_LUN_ONLINE;
4684 * - LUN has already been marked invalid and any pending I/O has been taken
4688 ctl_free_lun(struct ctl_lun *lun)
4690 struct ctl_softc *softc;
4692 struct ctl_port *port;
4694 struct ctl_lun *nlun;
4697 softc = lun->ctl_softc;
4699 mtx_assert(&softc->ctl_lock, MA_OWNED);
4701 STAILQ_REMOVE(&softc->lun_list, lun, ctl_lun, links);
4703 ctl_clear_mask(softc->ctl_lun_mask, lun->lun);
4705 softc->ctl_luns[lun->lun] = NULL;
4707 if (!TAILQ_EMPTY(&lun->ooa_queue))
4708 panic("Freeing a LUN %p with outstanding I/O!!\n", lun);
4713 * XXX KDM this scheme only works for a single target/multiple LUN
4714 * setup. It needs to be revamped for a multiple target scheme.
4716 * XXX KDM this results in port->lun_disable() getting called twice,
4717 * once when ctl_disable_lun() is called, and a second time here.
4718 * We really need to re-think the LUN disable semantics. There
4719 * should probably be several steps/levels to LUN removal:
4724 * Right now we only have a disable method when communicating to
4725 * the front end ports, at least for individual LUNs.
4728 STAILQ_FOREACH(port, &softc->port_list, links) {
4731 retval = port->lun_disable(port->targ_lun_arg, lun->target,
4734 printf("ctl_free_lun: FETD %s port %d returned error "
4735 "%d for lun_disable on target %ju lun %jd\n",
4736 port->port_name, port->targ_port, retval,
4737 (uintmax_t)lun->target.id, (intmax_t)lun->lun);
4740 if (STAILQ_FIRST(&softc->lun_list) == NULL) {
4741 port->status &= ~CTL_PORT_STATUS_LUN_ONLINE;
4743 retval = port->targ_disable(port->targ_lun_arg,lun->target);
4745 printf("ctl_free_lun: FETD %s port %d "
4746 "returned error %d for targ_disable on "
4747 "target %ju\n", port->port_name,
4748 port->targ_port, retval,
4749 (uintmax_t)lun->target.id);
4751 port->status &= ~CTL_PORT_STATUS_TARG_ONLINE;
4753 if ((port->status & CTL_PORT_STATUS_TARG_ONLINE) != 0)
4757 port->port_offline(port->onoff_arg);
4758 port->status &= ~CTL_PORT_STATUS_ONLINE;
4765 * Tell the backend to free resources, if this LUN has a backend.
4767 atomic_subtract_int(&lun->be_lun->be->num_luns, 1);
4768 lun->be_lun->lun_shutdown(lun->be_lun->be_lun);
4770 ctl_tpc_lun_shutdown(lun);
4771 mtx_destroy(&lun->lun_lock);
4772 free(lun->lun_devid, M_CTL);
4773 if (lun->flags & CTL_LUN_MALLOCED)
4776 STAILQ_FOREACH(nlun, &softc->lun_list, links) {
4777 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
4778 nlun->pending_ua[i] |= CTL_UA_LUN_CHANGE;
4786 ctl_create_lun(struct ctl_be_lun *be_lun)
4788 struct ctl_softc *ctl_softc;
4790 ctl_softc = control_softc;
4793 * ctl_alloc_lun() should handle all potential failure cases.
4795 ctl_alloc_lun(ctl_softc, NULL, be_lun, ctl_softc->target);
4799 ctl_add_lun(struct ctl_be_lun *be_lun)
4801 struct ctl_softc *ctl_softc = control_softc;
4803 mtx_lock(&ctl_softc->ctl_lock);
4804 STAILQ_INSERT_TAIL(&ctl_softc->pending_lun_queue, be_lun, links);
4805 mtx_unlock(&ctl_softc->ctl_lock);
4806 wakeup(&ctl_softc->pending_lun_queue);
4812 ctl_enable_lun(struct ctl_be_lun *be_lun)
4814 struct ctl_softc *ctl_softc;
4815 struct ctl_port *port, *nport;
4816 struct ctl_lun *lun;
4819 ctl_softc = control_softc;
4821 lun = (struct ctl_lun *)be_lun->ctl_lun;
4823 mtx_lock(&ctl_softc->ctl_lock);
4824 mtx_lock(&lun->lun_lock);
4825 if ((lun->flags & CTL_LUN_DISABLED) == 0) {
4827 * eh? Why did we get called if the LUN is already
4830 mtx_unlock(&lun->lun_lock);
4831 mtx_unlock(&ctl_softc->ctl_lock);
4834 lun->flags &= ~CTL_LUN_DISABLED;
4835 mtx_unlock(&lun->lun_lock);
4837 for (port = STAILQ_FIRST(&ctl_softc->port_list); port != NULL; port = nport) {
4838 nport = STAILQ_NEXT(port, links);
4841 * Drop the lock while we call the FETD's enable routine.
4842 * This can lead to a callback into CTL (at least in the
4843 * case of the internal initiator frontend.
4845 mtx_unlock(&ctl_softc->ctl_lock);
4846 retval = port->lun_enable(port->targ_lun_arg, lun->target,lun->lun);
4847 mtx_lock(&ctl_softc->ctl_lock);
4849 printf("%s: FETD %s port %d returned error "
4850 "%d for lun_enable on target %ju lun %jd\n",
4851 __func__, port->port_name, port->targ_port, retval,
4852 (uintmax_t)lun->target.id, (intmax_t)lun->lun);
4856 /* NOTE: TODO: why does lun enable affect port status? */
4857 port->status |= CTL_PORT_STATUS_LUN_ONLINE;
4862 mtx_unlock(&ctl_softc->ctl_lock);
4868 ctl_disable_lun(struct ctl_be_lun *be_lun)
4870 struct ctl_softc *ctl_softc;
4871 struct ctl_port *port;
4872 struct ctl_lun *lun;
4875 ctl_softc = control_softc;
4877 lun = (struct ctl_lun *)be_lun->ctl_lun;
4879 mtx_lock(&ctl_softc->ctl_lock);
4880 mtx_lock(&lun->lun_lock);
4881 if (lun->flags & CTL_LUN_DISABLED) {
4882 mtx_unlock(&lun->lun_lock);
4883 mtx_unlock(&ctl_softc->ctl_lock);
4886 lun->flags |= CTL_LUN_DISABLED;
4887 mtx_unlock(&lun->lun_lock);
4889 STAILQ_FOREACH(port, &ctl_softc->port_list, links) {
4890 mtx_unlock(&ctl_softc->ctl_lock);
4892 * Drop the lock before we call the frontend's disable
4893 * routine, to avoid lock order reversals.
4895 * XXX KDM what happens if the frontend list changes while
4896 * we're traversing it? It's unlikely, but should be handled.
4898 retval = port->lun_disable(port->targ_lun_arg, lun->target,
4900 mtx_lock(&ctl_softc->ctl_lock);
4902 printf("ctl_alloc_lun: FETD %s port %d returned error "
4903 "%d for lun_disable on target %ju lun %jd\n",
4904 port->port_name, port->targ_port, retval,
4905 (uintmax_t)lun->target.id, (intmax_t)lun->lun);
4909 mtx_unlock(&ctl_softc->ctl_lock);
4915 ctl_start_lun(struct ctl_be_lun *be_lun)
4917 struct ctl_softc *ctl_softc;
4918 struct ctl_lun *lun;
4920 ctl_softc = control_softc;
4922 lun = (struct ctl_lun *)be_lun->ctl_lun;
4924 mtx_lock(&lun->lun_lock);
4925 lun->flags &= ~CTL_LUN_STOPPED;
4926 mtx_unlock(&lun->lun_lock);
4932 ctl_stop_lun(struct ctl_be_lun *be_lun)
4934 struct ctl_softc *ctl_softc;
4935 struct ctl_lun *lun;
4937 ctl_softc = control_softc;
4939 lun = (struct ctl_lun *)be_lun->ctl_lun;
4941 mtx_lock(&lun->lun_lock);
4942 lun->flags |= CTL_LUN_STOPPED;
4943 mtx_unlock(&lun->lun_lock);
4949 ctl_lun_offline(struct ctl_be_lun *be_lun)
4951 struct ctl_softc *ctl_softc;
4952 struct ctl_lun *lun;
4954 ctl_softc = control_softc;
4956 lun = (struct ctl_lun *)be_lun->ctl_lun;
4958 mtx_lock(&lun->lun_lock);
4959 lun->flags |= CTL_LUN_OFFLINE;
4960 mtx_unlock(&lun->lun_lock);
4966 ctl_lun_online(struct ctl_be_lun *be_lun)
4968 struct ctl_softc *ctl_softc;
4969 struct ctl_lun *lun;
4971 ctl_softc = control_softc;
4973 lun = (struct ctl_lun *)be_lun->ctl_lun;
4975 mtx_lock(&lun->lun_lock);
4976 lun->flags &= ~CTL_LUN_OFFLINE;
4977 mtx_unlock(&lun->lun_lock);
4983 ctl_invalidate_lun(struct ctl_be_lun *be_lun)
4985 struct ctl_softc *ctl_softc;
4986 struct ctl_lun *lun;
4988 ctl_softc = control_softc;
4990 lun = (struct ctl_lun *)be_lun->ctl_lun;
4992 mtx_lock(&lun->lun_lock);
4995 * The LUN needs to be disabled before it can be marked invalid.
4997 if ((lun->flags & CTL_LUN_DISABLED) == 0) {
4998 mtx_unlock(&lun->lun_lock);
5002 * Mark the LUN invalid.
5004 lun->flags |= CTL_LUN_INVALID;
5007 * If there is nothing in the OOA queue, go ahead and free the LUN.
5008 * If we have something in the OOA queue, we'll free it when the
5009 * last I/O completes.
5011 if (TAILQ_EMPTY(&lun->ooa_queue)) {
5012 mtx_unlock(&lun->lun_lock);
5013 mtx_lock(&ctl_softc->ctl_lock);
5015 mtx_unlock(&ctl_softc->ctl_lock);
5017 mtx_unlock(&lun->lun_lock);
5023 ctl_lun_inoperable(struct ctl_be_lun *be_lun)
5025 struct ctl_softc *ctl_softc;
5026 struct ctl_lun *lun;
5028 ctl_softc = control_softc;
5029 lun = (struct ctl_lun *)be_lun->ctl_lun;
5031 mtx_lock(&lun->lun_lock);
5032 lun->flags |= CTL_LUN_INOPERABLE;
5033 mtx_unlock(&lun->lun_lock);
5039 ctl_lun_operable(struct ctl_be_lun *be_lun)
5041 struct ctl_softc *ctl_softc;
5042 struct ctl_lun *lun;
5044 ctl_softc = control_softc;
5045 lun = (struct ctl_lun *)be_lun->ctl_lun;
5047 mtx_lock(&lun->lun_lock);
5048 lun->flags &= ~CTL_LUN_INOPERABLE;
5049 mtx_unlock(&lun->lun_lock);
5055 ctl_lun_power_lock(struct ctl_be_lun *be_lun, struct ctl_nexus *nexus,
5058 struct ctl_softc *softc;
5059 struct ctl_lun *lun;
5060 struct copan_aps_subpage *current_sp;
5061 struct ctl_page_index *page_index;
5064 softc = control_softc;
5066 mtx_lock(&softc->ctl_lock);
5068 lun = (struct ctl_lun *)be_lun->ctl_lun;
5069 mtx_lock(&lun->lun_lock);
5072 for (i = 0; i < CTL_NUM_MODE_PAGES; i++) {
5073 if ((lun->mode_pages.index[i].page_code & SMPH_PC_MASK) !=
5077 if (lun->mode_pages.index[i].subpage != APS_SUBPAGE_CODE)
5079 page_index = &lun->mode_pages.index[i];
5082 if (page_index == NULL) {
5083 mtx_unlock(&lun->lun_lock);
5084 mtx_unlock(&softc->ctl_lock);
5085 printf("%s: APS subpage not found for lun %ju!\n", __func__,
5086 (uintmax_t)lun->lun);
5090 if ((softc->aps_locked_lun != 0)
5091 && (softc->aps_locked_lun != lun->lun)) {
5092 printf("%s: attempt to lock LUN %llu when %llu is already "
5094 mtx_unlock(&lun->lun_lock);
5095 mtx_unlock(&softc->ctl_lock);
5100 current_sp = (struct copan_aps_subpage *)(page_index->page_data +
5101 (page_index->page_len * CTL_PAGE_CURRENT));
5104 current_sp->lock_active = APS_LOCK_ACTIVE;
5105 softc->aps_locked_lun = lun->lun;
5107 current_sp->lock_active = 0;
5108 softc->aps_locked_lun = 0;
5113 * If we're in HA mode, try to send the lock message to the other
5116 if (ctl_is_single == 0) {
5118 union ctl_ha_msg lock_msg;
5120 lock_msg.hdr.nexus = *nexus;
5121 lock_msg.hdr.msg_type = CTL_MSG_APS_LOCK;
5123 lock_msg.aps.lock_flag = 1;
5125 lock_msg.aps.lock_flag = 0;
5126 isc_retval = ctl_ha_msg_send(CTL_HA_CHAN_CTL, &lock_msg,
5127 sizeof(lock_msg), 0);
5128 if (isc_retval > CTL_HA_STATUS_SUCCESS) {
5129 printf("%s: APS (lock=%d) error returned from "
5130 "ctl_ha_msg_send: %d\n", __func__, lock, isc_retval);
5131 mtx_unlock(&lun->lun_lock);
5132 mtx_unlock(&softc->ctl_lock);
5137 mtx_unlock(&lun->lun_lock);
5138 mtx_unlock(&softc->ctl_lock);
5144 ctl_lun_capacity_changed(struct ctl_be_lun *be_lun)
5146 struct ctl_lun *lun;
5147 struct ctl_softc *softc;
5150 softc = control_softc;
5152 lun = (struct ctl_lun *)be_lun->ctl_lun;
5154 mtx_lock(&lun->lun_lock);
5156 for (i = 0; i < CTL_MAX_INITIATORS; i++)
5157 lun->pending_ua[i] |= CTL_UA_CAPACITY_CHANGED;
5159 mtx_unlock(&lun->lun_lock);
5163 * Backend "memory move is complete" callback for requests that never
5164 * make it down to say RAIDCore's configuration code.
5167 ctl_config_move_done(union ctl_io *io)
5171 retval = CTL_RETVAL_COMPLETE;
5174 CTL_DEBUG_PRINT(("ctl_config_move_done\n"));
5176 * XXX KDM this shouldn't happen, but what if it does?
5178 if (io->io_hdr.io_type != CTL_IO_SCSI)
5179 panic("I/O type isn't CTL_IO_SCSI!");
5181 if ((io->io_hdr.port_status == 0)
5182 && ((io->io_hdr.flags & CTL_FLAG_ABORT) == 0)
5183 && ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_STATUS_NONE))
5184 io->io_hdr.status = CTL_SUCCESS;
5185 else if ((io->io_hdr.port_status != 0)
5186 && ((io->io_hdr.flags & CTL_FLAG_ABORT) == 0)
5187 && ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_STATUS_NONE)){
5189 * For hardware error sense keys, the sense key
5190 * specific value is defined to be a retry count,
5191 * but we use it to pass back an internal FETD
5192 * error code. XXX KDM Hopefully the FETD is only
5193 * using 16 bits for an error code, since that's
5194 * all the space we have in the sks field.
5196 ctl_set_internal_failure(&io->scsiio,
5199 io->io_hdr.port_status);
5200 if (io->io_hdr.flags & CTL_FLAG_ALLOCATED)
5201 free(io->scsiio.kern_data_ptr, M_CTL);
5206 if (((io->io_hdr.flags & CTL_FLAG_DATA_MASK) == CTL_FLAG_DATA_IN)
5207 || ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS)
5208 || ((io->io_hdr.flags & CTL_FLAG_ABORT) != 0)) {
5210 * XXX KDM just assuming a single pointer here, and not a
5211 * S/G list. If we start using S/G lists for config data,
5212 * we'll need to know how to clean them up here as well.
5214 if (io->io_hdr.flags & CTL_FLAG_ALLOCATED)
5215 free(io->scsiio.kern_data_ptr, M_CTL);
5216 /* Hopefully the user has already set the status... */
5220 * XXX KDM now we need to continue data movement. Some
5222 * - call ctl_scsiio() again? We don't do this for data
5223 * writes, because for those at least we know ahead of
5224 * time where the write will go and how long it is. For
5225 * config writes, though, that information is largely
5226 * contained within the write itself, thus we need to
5227 * parse out the data again.
5229 * - Call some other function once the data is in?
5233 * XXX KDM call ctl_scsiio() again for now, and check flag
5234 * bits to see whether we're allocated or not.
5236 retval = ctl_scsiio(&io->scsiio);
5243 * This gets called by a backend driver when it is done with a
5244 * data_submit method.
5247 ctl_data_submit_done(union ctl_io *io)
5250 * If the IO_CONT flag is set, we need to call the supplied
5251 * function to continue processing the I/O, instead of completing
5254 * If there is an error, though, we don't want to keep processing.
5255 * Instead, just send status back to the initiator.
5257 if ((io->io_hdr.flags & CTL_FLAG_IO_CONT) &&
5258 (io->io_hdr.flags & CTL_FLAG_ABORT) == 0 &&
5259 ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_STATUS_NONE ||
5260 (io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS)) {
5261 io->scsiio.io_cont(io);
5268 * This gets called by a backend driver when it is done with a
5269 * configuration write.
5272 ctl_config_write_done(union ctl_io *io)
5277 * If the IO_CONT flag is set, we need to call the supplied
5278 * function to continue processing the I/O, instead of completing
5281 * If there is an error, though, we don't want to keep processing.
5282 * Instead, just send status back to the initiator.
5284 if ((io->io_hdr.flags & CTL_FLAG_IO_CONT) &&
5285 (io->io_hdr.flags & CTL_FLAG_ABORT) == 0 &&
5286 ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_STATUS_NONE ||
5287 (io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS)) {
5288 io->scsiio.io_cont(io);
5292 * Since a configuration write can be done for commands that actually
5293 * have data allocated, like write buffer, and commands that have
5294 * no data, like start/stop unit, we need to check here.
5296 if (io->io_hdr.flags & CTL_FLAG_ALLOCATED)
5297 buf = io->scsiio.kern_data_ptr;
5306 * SCSI release command.
5309 ctl_scsi_release(struct ctl_scsiio *ctsio)
5311 int length, longid, thirdparty_id, resv_id;
5312 struct ctl_softc *ctl_softc;
5313 struct ctl_lun *lun;
5319 CTL_DEBUG_PRINT(("ctl_scsi_release\n"));
5321 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
5322 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5323 ctl_softc = control_softc;
5325 switch (ctsio->cdb[0]) {
5327 struct scsi_release_10 *cdb;
5329 cdb = (struct scsi_release_10 *)ctsio->cdb;
5331 if (cdb->byte2 & SR10_LONGID)
5334 thirdparty_id = cdb->thirdparty_id;
5336 resv_id = cdb->resv_id;
5337 length = scsi_2btoul(cdb->length);
5344 * XXX KDM right now, we only support LUN reservation. We don't
5345 * support 3rd party reservations, or extent reservations, which
5346 * might actually need the parameter list. If we've gotten this
5347 * far, we've got a LUN reservation. Anything else got kicked out
5348 * above. So, according to SPC, ignore the length.
5352 if (((ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0)
5354 ctsio->kern_data_ptr = malloc(length, M_CTL, M_WAITOK);
5355 ctsio->kern_data_len = length;
5356 ctsio->kern_total_len = length;
5357 ctsio->kern_data_resid = 0;
5358 ctsio->kern_rel_offset = 0;
5359 ctsio->kern_sg_entries = 0;
5360 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
5361 ctsio->be_move_done = ctl_config_move_done;
5362 ctl_datamove((union ctl_io *)ctsio);
5364 return (CTL_RETVAL_COMPLETE);
5368 thirdparty_id = scsi_8btou64(ctsio->kern_data_ptr);
5370 mtx_lock(&lun->lun_lock);
5373 * According to SPC, it is not an error for an intiator to attempt
5374 * to release a reservation on a LUN that isn't reserved, or that
5375 * is reserved by another initiator. The reservation can only be
5376 * released, though, by the initiator who made it or by one of
5377 * several reset type events.
5379 if ((lun->flags & CTL_LUN_RESERVED) && (lun->res_idx == residx))
5380 lun->flags &= ~CTL_LUN_RESERVED;
5382 mtx_unlock(&lun->lun_lock);
5384 ctsio->scsi_status = SCSI_STATUS_OK;
5385 ctsio->io_hdr.status = CTL_SUCCESS;
5387 if (ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) {
5388 free(ctsio->kern_data_ptr, M_CTL);
5389 ctsio->io_hdr.flags &= ~CTL_FLAG_ALLOCATED;
5392 ctl_done((union ctl_io *)ctsio);
5393 return (CTL_RETVAL_COMPLETE);
5397 ctl_scsi_reserve(struct ctl_scsiio *ctsio)
5399 int extent, thirdparty, longid;
5400 int resv_id, length;
5401 uint64_t thirdparty_id;
5402 struct ctl_softc *ctl_softc;
5403 struct ctl_lun *lun;
5413 CTL_DEBUG_PRINT(("ctl_reserve\n"));
5415 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
5416 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5417 ctl_softc = control_softc;
5419 switch (ctsio->cdb[0]) {
5421 struct scsi_reserve_10 *cdb;
5423 cdb = (struct scsi_reserve_10 *)ctsio->cdb;
5425 if (cdb->byte2 & SR10_LONGID)
5428 thirdparty_id = cdb->thirdparty_id;
5430 resv_id = cdb->resv_id;
5431 length = scsi_2btoul(cdb->length);
5437 * XXX KDM right now, we only support LUN reservation. We don't
5438 * support 3rd party reservations, or extent reservations, which
5439 * might actually need the parameter list. If we've gotten this
5440 * far, we've got a LUN reservation. Anything else got kicked out
5441 * above. So, according to SPC, ignore the length.
5445 if (((ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0)
5447 ctsio->kern_data_ptr = malloc(length, M_CTL, M_WAITOK);
5448 ctsio->kern_data_len = length;
5449 ctsio->kern_total_len = length;
5450 ctsio->kern_data_resid = 0;
5451 ctsio->kern_rel_offset = 0;
5452 ctsio->kern_sg_entries = 0;
5453 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
5454 ctsio->be_move_done = ctl_config_move_done;
5455 ctl_datamove((union ctl_io *)ctsio);
5457 return (CTL_RETVAL_COMPLETE);
5461 thirdparty_id = scsi_8btou64(ctsio->kern_data_ptr);
5463 mtx_lock(&lun->lun_lock);
5464 if ((lun->flags & CTL_LUN_RESERVED) && (lun->res_idx != residx)) {
5465 ctsio->scsi_status = SCSI_STATUS_RESERV_CONFLICT;
5466 ctsio->io_hdr.status = CTL_SCSI_ERROR;
5470 lun->flags |= CTL_LUN_RESERVED;
5471 lun->res_idx = residx;
5473 ctsio->scsi_status = SCSI_STATUS_OK;
5474 ctsio->io_hdr.status = CTL_SUCCESS;
5477 mtx_unlock(&lun->lun_lock);
5479 if (ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) {
5480 free(ctsio->kern_data_ptr, M_CTL);
5481 ctsio->io_hdr.flags &= ~CTL_FLAG_ALLOCATED;
5484 ctl_done((union ctl_io *)ctsio);
5485 return (CTL_RETVAL_COMPLETE);
5489 ctl_start_stop(struct ctl_scsiio *ctsio)
5491 struct scsi_start_stop_unit *cdb;
5492 struct ctl_lun *lun;
5493 struct ctl_softc *ctl_softc;
5496 CTL_DEBUG_PRINT(("ctl_start_stop\n"));
5498 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5499 ctl_softc = control_softc;
5502 cdb = (struct scsi_start_stop_unit *)ctsio->cdb;
5506 * We don't support the immediate bit on a stop unit. In order to
5507 * do that, we would need to code up a way to know that a stop is
5508 * pending, and hold off any new commands until it completes, one
5509 * way or another. Then we could accept or reject those commands
5510 * depending on its status. We would almost need to do the reverse
5511 * of what we do below for an immediate start -- return the copy of
5512 * the ctl_io to the FETD with status to send to the host (and to
5513 * free the copy!) and then free the original I/O once the stop
5514 * actually completes. That way, the OOA queue mechanism can work
5515 * to block commands that shouldn't proceed. Another alternative
5516 * would be to put the copy in the queue in place of the original,
5517 * and return the original back to the caller. That could be
5520 if ((cdb->byte2 & SSS_IMMED)
5521 && ((cdb->how & SSS_START) == 0)) {
5522 ctl_set_invalid_field(ctsio,
5528 ctl_done((union ctl_io *)ctsio);
5529 return (CTL_RETVAL_COMPLETE);
5532 if ((lun->flags & CTL_LUN_PR_RESERVED)
5533 && ((cdb->how & SSS_START)==0)) {
5536 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
5537 if (!lun->per_res[residx].registered
5538 || (lun->pr_res_idx!=residx && lun->res_type < 4)) {
5540 ctl_set_reservation_conflict(ctsio);
5541 ctl_done((union ctl_io *)ctsio);
5542 return (CTL_RETVAL_COMPLETE);
5547 * If there is no backend on this device, we can't start or stop
5548 * it. In theory we shouldn't get any start/stop commands in the
5549 * first place at this level if the LUN doesn't have a backend.
5550 * That should get stopped by the command decode code.
5552 if (lun->backend == NULL) {
5553 ctl_set_invalid_opcode(ctsio);
5554 ctl_done((union ctl_io *)ctsio);
5555 return (CTL_RETVAL_COMPLETE);
5559 * XXX KDM Copan-specific offline behavior.
5560 * Figure out a reasonable way to port this?
5563 mtx_lock(&lun->lun_lock);
5565 if (((cdb->byte2 & SSS_ONOFFLINE) == 0)
5566 && (lun->flags & CTL_LUN_OFFLINE)) {
5568 * If the LUN is offline, and the on/offline bit isn't set,
5569 * reject the start or stop. Otherwise, let it through.
5571 mtx_unlock(&lun->lun_lock);
5572 ctl_set_lun_not_ready(ctsio);
5573 ctl_done((union ctl_io *)ctsio);
5575 mtx_unlock(&lun->lun_lock);
5576 #endif /* NEEDTOPORT */
5578 * This could be a start or a stop when we're online,
5579 * or a stop/offline or start/online. A start or stop when
5580 * we're offline is covered in the case above.
5583 * In the non-immediate case, we send the request to
5584 * the backend and return status to the user when
5587 * In the immediate case, we allocate a new ctl_io
5588 * to hold a copy of the request, and send that to
5589 * the backend. We then set good status on the
5590 * user's request and return it immediately.
5592 if (cdb->byte2 & SSS_IMMED) {
5593 union ctl_io *new_io;
5595 new_io = ctl_alloc_io(ctsio->io_hdr.pool);
5596 if (new_io == NULL) {
5597 ctl_set_busy(ctsio);
5598 ctl_done((union ctl_io *)ctsio);
5600 ctl_copy_io((union ctl_io *)ctsio,
5602 retval = lun->backend->config_write(new_io);
5603 ctl_set_success(ctsio);
5604 ctl_done((union ctl_io *)ctsio);
5607 retval = lun->backend->config_write(
5608 (union ctl_io *)ctsio);
5617 * We support the SYNCHRONIZE CACHE command (10 and 16 byte versions), but
5618 * we don't really do anything with the LBA and length fields if the user
5619 * passes them in. Instead we'll just flush out the cache for the entire
5623 ctl_sync_cache(struct ctl_scsiio *ctsio)
5625 struct ctl_lun *lun;
5626 struct ctl_softc *ctl_softc;
5627 uint64_t starting_lba;
5628 uint32_t block_count;
5631 CTL_DEBUG_PRINT(("ctl_sync_cache\n"));
5633 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5634 ctl_softc = control_softc;
5637 switch (ctsio->cdb[0]) {
5638 case SYNCHRONIZE_CACHE: {
5639 struct scsi_sync_cache *cdb;
5640 cdb = (struct scsi_sync_cache *)ctsio->cdb;
5642 starting_lba = scsi_4btoul(cdb->begin_lba);
5643 block_count = scsi_2btoul(cdb->lb_count);
5646 case SYNCHRONIZE_CACHE_16: {
5647 struct scsi_sync_cache_16 *cdb;
5648 cdb = (struct scsi_sync_cache_16 *)ctsio->cdb;
5650 starting_lba = scsi_8btou64(cdb->begin_lba);
5651 block_count = scsi_4btoul(cdb->lb_count);
5655 ctl_set_invalid_opcode(ctsio);
5656 ctl_done((union ctl_io *)ctsio);
5658 break; /* NOTREACHED */
5662 * We check the LBA and length, but don't do anything with them.
5663 * A SYNCHRONIZE CACHE will cause the entire cache for this lun to
5664 * get flushed. This check will just help satisfy anyone who wants
5665 * to see an error for an out of range LBA.
5667 if ((starting_lba + block_count) > (lun->be_lun->maxlba + 1)) {
5668 ctl_set_lba_out_of_range(ctsio);
5669 ctl_done((union ctl_io *)ctsio);
5674 * If this LUN has no backend, we can't flush the cache anyway.
5676 if (lun->backend == NULL) {
5677 ctl_set_invalid_opcode(ctsio);
5678 ctl_done((union ctl_io *)ctsio);
5683 * Check to see whether we're configured to send the SYNCHRONIZE
5684 * CACHE command directly to the back end.
5686 mtx_lock(&lun->lun_lock);
5687 if ((ctl_softc->flags & CTL_FLAG_REAL_SYNC)
5688 && (++(lun->sync_count) >= lun->sync_interval)) {
5689 lun->sync_count = 0;
5690 mtx_unlock(&lun->lun_lock);
5691 retval = lun->backend->config_write((union ctl_io *)ctsio);
5693 mtx_unlock(&lun->lun_lock);
5694 ctl_set_success(ctsio);
5695 ctl_done((union ctl_io *)ctsio);
5704 ctl_format(struct ctl_scsiio *ctsio)
5706 struct scsi_format *cdb;
5707 struct ctl_lun *lun;
5708 struct ctl_softc *ctl_softc;
5709 int length, defect_list_len;
5711 CTL_DEBUG_PRINT(("ctl_format\n"));
5713 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5714 ctl_softc = control_softc;
5716 cdb = (struct scsi_format *)ctsio->cdb;
5719 if (cdb->byte2 & SF_FMTDATA) {
5720 if (cdb->byte2 & SF_LONGLIST)
5721 length = sizeof(struct scsi_format_header_long);
5723 length = sizeof(struct scsi_format_header_short);
5726 if (((ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0)
5728 ctsio->kern_data_ptr = malloc(length, M_CTL, M_WAITOK);
5729 ctsio->kern_data_len = length;
5730 ctsio->kern_total_len = length;
5731 ctsio->kern_data_resid = 0;
5732 ctsio->kern_rel_offset = 0;
5733 ctsio->kern_sg_entries = 0;
5734 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
5735 ctsio->be_move_done = ctl_config_move_done;
5736 ctl_datamove((union ctl_io *)ctsio);
5738 return (CTL_RETVAL_COMPLETE);
5741 defect_list_len = 0;
5743 if (cdb->byte2 & SF_FMTDATA) {
5744 if (cdb->byte2 & SF_LONGLIST) {
5745 struct scsi_format_header_long *header;
5747 header = (struct scsi_format_header_long *)
5748 ctsio->kern_data_ptr;
5750 defect_list_len = scsi_4btoul(header->defect_list_len);
5751 if (defect_list_len != 0) {
5752 ctl_set_invalid_field(ctsio,
5761 struct scsi_format_header_short *header;
5763 header = (struct scsi_format_header_short *)
5764 ctsio->kern_data_ptr;
5766 defect_list_len = scsi_2btoul(header->defect_list_len);
5767 if (defect_list_len != 0) {
5768 ctl_set_invalid_field(ctsio,
5780 * The format command will clear out the "Medium format corrupted"
5781 * status if set by the configuration code. That status is really
5782 * just a way to notify the host that we have lost the media, and
5783 * get them to issue a command that will basically make them think
5784 * they're blowing away the media.
5786 mtx_lock(&lun->lun_lock);
5787 lun->flags &= ~CTL_LUN_INOPERABLE;
5788 mtx_unlock(&lun->lun_lock);
5790 ctsio->scsi_status = SCSI_STATUS_OK;
5791 ctsio->io_hdr.status = CTL_SUCCESS;
5794 if (ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) {
5795 free(ctsio->kern_data_ptr, M_CTL);
5796 ctsio->io_hdr.flags &= ~CTL_FLAG_ALLOCATED;
5799 ctl_done((union ctl_io *)ctsio);
5800 return (CTL_RETVAL_COMPLETE);
5804 ctl_read_buffer(struct ctl_scsiio *ctsio)
5806 struct scsi_read_buffer *cdb;
5807 struct ctl_lun *lun;
5808 int buffer_offset, len;
5809 static uint8_t descr[4];
5810 static uint8_t echo_descr[4] = { 0 };
5812 CTL_DEBUG_PRINT(("ctl_read_buffer\n"));
5814 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5815 cdb = (struct scsi_read_buffer *)ctsio->cdb;
5817 if (lun->flags & CTL_LUN_PR_RESERVED) {
5821 * XXX KDM need a lock here.
5823 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
5824 if ((lun->res_type == SPR_TYPE_EX_AC
5825 && residx != lun->pr_res_idx)
5826 || ((lun->res_type == SPR_TYPE_EX_AC_RO
5827 || lun->res_type == SPR_TYPE_EX_AC_AR)
5828 && !lun->per_res[residx].registered)) {
5829 ctl_set_reservation_conflict(ctsio);
5830 ctl_done((union ctl_io *)ctsio);
5831 return (CTL_RETVAL_COMPLETE);
5835 if ((cdb->byte2 & RWB_MODE) != RWB_MODE_DATA &&
5836 (cdb->byte2 & RWB_MODE) != RWB_MODE_ECHO_DESCR &&
5837 (cdb->byte2 & RWB_MODE) != RWB_MODE_DESCR) {
5838 ctl_set_invalid_field(ctsio,
5844 ctl_done((union ctl_io *)ctsio);
5845 return (CTL_RETVAL_COMPLETE);
5848 len = scsi_3btoul(cdb->length);
5849 buffer_offset = scsi_3btoul(cdb->offset);
5851 if (buffer_offset + len > sizeof(lun->write_buffer)) {
5852 ctl_set_invalid_field(ctsio,
5858 ctl_done((union ctl_io *)ctsio);
5859 return (CTL_RETVAL_COMPLETE);
5862 if ((cdb->byte2 & RWB_MODE) == RWB_MODE_DESCR) {
5864 scsi_ulto3b(sizeof(lun->write_buffer), &descr[1]);
5865 ctsio->kern_data_ptr = descr;
5866 len = min(len, sizeof(descr));
5867 } else if ((cdb->byte2 & RWB_MODE) == RWB_MODE_ECHO_DESCR) {
5868 ctsio->kern_data_ptr = echo_descr;
5869 len = min(len, sizeof(echo_descr));
5871 ctsio->kern_data_ptr = lun->write_buffer + buffer_offset;
5872 ctsio->kern_data_len = len;
5873 ctsio->kern_total_len = len;
5874 ctsio->kern_data_resid = 0;
5875 ctsio->kern_rel_offset = 0;
5876 ctsio->kern_sg_entries = 0;
5877 ctsio->be_move_done = ctl_config_move_done;
5878 ctl_datamove((union ctl_io *)ctsio);
5880 return (CTL_RETVAL_COMPLETE);
5884 ctl_write_buffer(struct ctl_scsiio *ctsio)
5886 struct scsi_write_buffer *cdb;
5887 struct ctl_lun *lun;
5888 int buffer_offset, len;
5890 CTL_DEBUG_PRINT(("ctl_write_buffer\n"));
5892 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5893 cdb = (struct scsi_write_buffer *)ctsio->cdb;
5895 if ((cdb->byte2 & RWB_MODE) != RWB_MODE_DATA) {
5896 ctl_set_invalid_field(ctsio,
5902 ctl_done((union ctl_io *)ctsio);
5903 return (CTL_RETVAL_COMPLETE);
5906 len = scsi_3btoul(cdb->length);
5907 buffer_offset = scsi_3btoul(cdb->offset);
5909 if (buffer_offset + len > sizeof(lun->write_buffer)) {
5910 ctl_set_invalid_field(ctsio,
5916 ctl_done((union ctl_io *)ctsio);
5917 return (CTL_RETVAL_COMPLETE);
5921 * If we've got a kernel request that hasn't been malloced yet,
5922 * malloc it and tell the caller the data buffer is here.
5924 if ((ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0) {
5925 ctsio->kern_data_ptr = lun->write_buffer + buffer_offset;
5926 ctsio->kern_data_len = len;
5927 ctsio->kern_total_len = len;
5928 ctsio->kern_data_resid = 0;
5929 ctsio->kern_rel_offset = 0;
5930 ctsio->kern_sg_entries = 0;
5931 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
5932 ctsio->be_move_done = ctl_config_move_done;
5933 ctl_datamove((union ctl_io *)ctsio);
5935 return (CTL_RETVAL_COMPLETE);
5938 ctl_done((union ctl_io *)ctsio);
5940 return (CTL_RETVAL_COMPLETE);
5944 ctl_write_same(struct ctl_scsiio *ctsio)
5946 struct ctl_lun *lun;
5947 struct ctl_lba_len_flags *lbalen;
5949 uint32_t num_blocks;
5953 retval = CTL_RETVAL_COMPLETE;
5955 CTL_DEBUG_PRINT(("ctl_write_same\n"));
5957 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
5959 switch (ctsio->cdb[0]) {
5960 case WRITE_SAME_10: {
5961 struct scsi_write_same_10 *cdb;
5963 cdb = (struct scsi_write_same_10 *)ctsio->cdb;
5965 lba = scsi_4btoul(cdb->addr);
5966 num_blocks = scsi_2btoul(cdb->length);
5970 case WRITE_SAME_16: {
5971 struct scsi_write_same_16 *cdb;
5973 cdb = (struct scsi_write_same_16 *)ctsio->cdb;
5975 lba = scsi_8btou64(cdb->addr);
5976 num_blocks = scsi_4btoul(cdb->length);
5982 * We got a command we don't support. This shouldn't
5983 * happen, commands should be filtered out above us.
5985 ctl_set_invalid_opcode(ctsio);
5986 ctl_done((union ctl_io *)ctsio);
5988 return (CTL_RETVAL_COMPLETE);
5989 break; /* NOTREACHED */
5992 /* NDOB and ANCHOR flags can be used only together with UNMAP */
5993 if ((byte2 & SWS_UNMAP) == 0 &&
5994 (byte2 & (SWS_NDOB | SWS_ANCHOR)) != 0) {
5995 ctl_set_invalid_field(ctsio, /*sks_valid*/ 1,
5996 /*command*/ 1, /*field*/ 1, /*bit_valid*/ 1, /*bit*/ 0);
5997 ctl_done((union ctl_io *)ctsio);
5998 return (CTL_RETVAL_COMPLETE);
6002 * The first check is to make sure we're in bounds, the second
6003 * check is to catch wrap-around problems. If the lba + num blocks
6004 * is less than the lba, then we've wrapped around and the block
6005 * range is invalid anyway.
6007 if (((lba + num_blocks) > (lun->be_lun->maxlba + 1))
6008 || ((lba + num_blocks) < lba)) {
6009 ctl_set_lba_out_of_range(ctsio);
6010 ctl_done((union ctl_io *)ctsio);
6011 return (CTL_RETVAL_COMPLETE);
6014 /* Zero number of blocks means "to the last logical block" */
6015 if (num_blocks == 0) {
6016 if ((lun->be_lun->maxlba + 1) - lba > UINT32_MAX) {
6017 ctl_set_invalid_field(ctsio,
6023 ctl_done((union ctl_io *)ctsio);
6024 return (CTL_RETVAL_COMPLETE);
6026 num_blocks = (lun->be_lun->maxlba + 1) - lba;
6029 len = lun->be_lun->blocksize;
6032 * If we've got a kernel request that hasn't been malloced yet,
6033 * malloc it and tell the caller the data buffer is here.
6035 if ((byte2 & SWS_NDOB) == 0 &&
6036 (ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0) {
6037 ctsio->kern_data_ptr = malloc(len, M_CTL, M_WAITOK);;
6038 ctsio->kern_data_len = len;
6039 ctsio->kern_total_len = len;
6040 ctsio->kern_data_resid = 0;
6041 ctsio->kern_rel_offset = 0;
6042 ctsio->kern_sg_entries = 0;
6043 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
6044 ctsio->be_move_done = ctl_config_move_done;
6045 ctl_datamove((union ctl_io *)ctsio);
6047 return (CTL_RETVAL_COMPLETE);
6050 lbalen = (struct ctl_lba_len_flags *)&ctsio->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
6052 lbalen->len = num_blocks;
6053 lbalen->flags = byte2;
6054 retval = lun->backend->config_write((union ctl_io *)ctsio);
6060 ctl_unmap(struct ctl_scsiio *ctsio)
6062 struct ctl_lun *lun;
6063 struct scsi_unmap *cdb;
6064 struct ctl_ptr_len_flags *ptrlen;
6065 struct scsi_unmap_header *hdr;
6066 struct scsi_unmap_desc *buf, *end, *endnz, *range;
6068 uint32_t num_blocks;
6072 retval = CTL_RETVAL_COMPLETE;
6074 CTL_DEBUG_PRINT(("ctl_unmap\n"));
6076 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
6077 cdb = (struct scsi_unmap *)ctsio->cdb;
6079 len = scsi_2btoul(cdb->length);
6083 * If we've got a kernel request that hasn't been malloced yet,
6084 * malloc it and tell the caller the data buffer is here.
6086 if ((ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0) {
6087 ctsio->kern_data_ptr = malloc(len, M_CTL, M_WAITOK);;
6088 ctsio->kern_data_len = len;
6089 ctsio->kern_total_len = len;
6090 ctsio->kern_data_resid = 0;
6091 ctsio->kern_rel_offset = 0;
6092 ctsio->kern_sg_entries = 0;
6093 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
6094 ctsio->be_move_done = ctl_config_move_done;
6095 ctl_datamove((union ctl_io *)ctsio);
6097 return (CTL_RETVAL_COMPLETE);
6100 len = ctsio->kern_total_len - ctsio->kern_data_resid;
6101 hdr = (struct scsi_unmap_header *)ctsio->kern_data_ptr;
6102 if (len < sizeof (*hdr) ||
6103 len < (scsi_2btoul(hdr->length) + sizeof(hdr->length)) ||
6104 len < (scsi_2btoul(hdr->desc_length) + sizeof (*hdr)) ||
6105 scsi_2btoul(hdr->desc_length) % sizeof(*buf) != 0) {
6106 ctl_set_invalid_field(ctsio,
6112 ctl_done((union ctl_io *)ctsio);
6113 return (CTL_RETVAL_COMPLETE);
6115 len = scsi_2btoul(hdr->desc_length);
6116 buf = (struct scsi_unmap_desc *)(hdr + 1);
6117 end = buf + len / sizeof(*buf);
6120 for (range = buf; range < end; range++) {
6121 lba = scsi_8btou64(range->lba);
6122 num_blocks = scsi_4btoul(range->length);
6123 if (((lba + num_blocks) > (lun->be_lun->maxlba + 1))
6124 || ((lba + num_blocks) < lba)) {
6125 ctl_set_lba_out_of_range(ctsio);
6126 ctl_done((union ctl_io *)ctsio);
6127 return (CTL_RETVAL_COMPLETE);
6129 if (num_blocks != 0)
6134 * Block backend can not handle zero last range.
6135 * Filter it out and return if there is nothing left.
6137 len = (uint8_t *)endnz - (uint8_t *)buf;
6139 ctl_set_success(ctsio);
6140 ctl_done((union ctl_io *)ctsio);
6141 return (CTL_RETVAL_COMPLETE);
6144 mtx_lock(&lun->lun_lock);
6145 ptrlen = (struct ctl_ptr_len_flags *)
6146 &ctsio->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
6147 ptrlen->ptr = (void *)buf;
6149 ptrlen->flags = byte2;
6150 ctl_check_blocked(lun);
6151 mtx_unlock(&lun->lun_lock);
6153 retval = lun->backend->config_write((union ctl_io *)ctsio);
6158 * Note that this function currently doesn't actually do anything inside
6159 * CTL to enforce things if the DQue bit is turned on.
6161 * Also note that this function can't be used in the default case, because
6162 * the DQue bit isn't set in the changeable mask for the control mode page
6163 * anyway. This is just here as an example for how to implement a page
6164 * handler, and a placeholder in case we want to allow the user to turn
6165 * tagged queueing on and off.
6167 * The D_SENSE bit handling is functional, however, and will turn
6168 * descriptor sense on and off for a given LUN.
6171 ctl_control_page_handler(struct ctl_scsiio *ctsio,
6172 struct ctl_page_index *page_index, uint8_t *page_ptr)
6174 struct scsi_control_page *current_cp, *saved_cp, *user_cp;
6175 struct ctl_lun *lun;
6176 struct ctl_softc *softc;
6180 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
6181 initidx = ctl_get_initindex(&ctsio->io_hdr.nexus);
6184 user_cp = (struct scsi_control_page *)page_ptr;
6185 current_cp = (struct scsi_control_page *)
6186 (page_index->page_data + (page_index->page_len *
6188 saved_cp = (struct scsi_control_page *)
6189 (page_index->page_data + (page_index->page_len *
6192 softc = control_softc;
6194 mtx_lock(&lun->lun_lock);
6195 if (((current_cp->rlec & SCP_DSENSE) == 0)
6196 && ((user_cp->rlec & SCP_DSENSE) != 0)) {
6198 * Descriptor sense is currently turned off and the user
6199 * wants to turn it on.
6201 current_cp->rlec |= SCP_DSENSE;
6202 saved_cp->rlec |= SCP_DSENSE;
6203 lun->flags |= CTL_LUN_SENSE_DESC;
6205 } else if (((current_cp->rlec & SCP_DSENSE) != 0)
6206 && ((user_cp->rlec & SCP_DSENSE) == 0)) {
6208 * Descriptor sense is currently turned on, and the user
6209 * wants to turn it off.
6211 current_cp->rlec &= ~SCP_DSENSE;
6212 saved_cp->rlec &= ~SCP_DSENSE;
6213 lun->flags &= ~CTL_LUN_SENSE_DESC;
6216 if ((current_cp->queue_flags & SCP_QUEUE_ALG_MASK) !=
6217 (user_cp->queue_flags & SCP_QUEUE_ALG_MASK)) {
6218 current_cp->queue_flags &= ~SCP_QUEUE_ALG_MASK;
6219 current_cp->queue_flags |= user_cp->queue_flags & SCP_QUEUE_ALG_MASK;
6220 saved_cp->queue_flags &= ~SCP_QUEUE_ALG_MASK;
6221 saved_cp->queue_flags |= user_cp->queue_flags & SCP_QUEUE_ALG_MASK;
6227 * Let other initiators know that the mode
6228 * parameters for this LUN have changed.
6230 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
6234 lun->pending_ua[i] |= CTL_UA_MODE_CHANGE;
6237 mtx_unlock(&lun->lun_lock);
6243 ctl_caching_sp_handler(struct ctl_scsiio *ctsio,
6244 struct ctl_page_index *page_index, uint8_t *page_ptr)
6246 struct scsi_caching_page *current_cp, *saved_cp, *user_cp;
6247 struct ctl_lun *lun;
6251 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
6252 initidx = ctl_get_initindex(&ctsio->io_hdr.nexus);
6255 user_cp = (struct scsi_caching_page *)page_ptr;
6256 current_cp = (struct scsi_caching_page *)
6257 (page_index->page_data + (page_index->page_len *
6259 saved_cp = (struct scsi_caching_page *)
6260 (page_index->page_data + (page_index->page_len *
6263 mtx_lock(&lun->lun_lock);
6264 if ((current_cp->flags1 & (SCP_WCE | SCP_RCD)) !=
6265 (user_cp->flags1 & (SCP_WCE | SCP_RCD))) {
6266 current_cp->flags1 &= ~(SCP_WCE | SCP_RCD);
6267 current_cp->flags1 |= user_cp->flags1 & (SCP_WCE | SCP_RCD);
6268 saved_cp->flags1 &= ~(SCP_WCE | SCP_RCD);
6269 saved_cp->flags1 |= user_cp->flags1 & (SCP_WCE | SCP_RCD);
6275 * Let other initiators know that the mode
6276 * parameters for this LUN have changed.
6278 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
6282 lun->pending_ua[i] |= CTL_UA_MODE_CHANGE;
6285 mtx_unlock(&lun->lun_lock);
6291 ctl_power_sp_handler(struct ctl_scsiio *ctsio,
6292 struct ctl_page_index *page_index, uint8_t *page_ptr)
6298 ctl_power_sp_sense_handler(struct ctl_scsiio *ctsio,
6299 struct ctl_page_index *page_index, int pc)
6301 struct copan_power_subpage *page;
6303 page = (struct copan_power_subpage *)page_index->page_data +
6304 (page_index->page_len * pc);
6307 case SMS_PAGE_CTRL_CHANGEABLE >> 6:
6309 * We don't update the changable bits for this page.
6312 case SMS_PAGE_CTRL_CURRENT >> 6:
6313 case SMS_PAGE_CTRL_DEFAULT >> 6:
6314 case SMS_PAGE_CTRL_SAVED >> 6:
6316 ctl_update_power_subpage(page);
6321 EPRINT(0, "Invalid PC %d!!", pc);
6330 ctl_aps_sp_handler(struct ctl_scsiio *ctsio,
6331 struct ctl_page_index *page_index, uint8_t *page_ptr)
6333 struct copan_aps_subpage *user_sp;
6334 struct copan_aps_subpage *current_sp;
6335 union ctl_modepage_info *modepage_info;
6336 struct ctl_softc *softc;
6337 struct ctl_lun *lun;
6340 retval = CTL_RETVAL_COMPLETE;
6341 current_sp = (struct copan_aps_subpage *)(page_index->page_data +
6342 (page_index->page_len * CTL_PAGE_CURRENT));
6343 softc = control_softc;
6344 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
6346 user_sp = (struct copan_aps_subpage *)page_ptr;
6348 modepage_info = (union ctl_modepage_info *)
6349 ctsio->io_hdr.ctl_private[CTL_PRIV_MODEPAGE].bytes;
6351 modepage_info->header.page_code = page_index->page_code & SMPH_PC_MASK;
6352 modepage_info->header.subpage = page_index->subpage;
6353 modepage_info->aps.lock_active = user_sp->lock_active;
6355 mtx_lock(&softc->ctl_lock);
6358 * If there is a request to lock the LUN and another LUN is locked
6359 * this is an error. If the requested LUN is already locked ignore
6360 * the request. If no LUN is locked attempt to lock it.
6361 * if there is a request to unlock the LUN and the LUN is currently
6362 * locked attempt to unlock it. Otherwise ignore the request. i.e.
6363 * if another LUN is locked or no LUN is locked.
6365 if (user_sp->lock_active & APS_LOCK_ACTIVE) {
6366 if (softc->aps_locked_lun == lun->lun) {
6368 * This LUN is already locked, so we're done.
6370 retval = CTL_RETVAL_COMPLETE;
6371 } else if (softc->aps_locked_lun == 0) {
6373 * No one has the lock, pass the request to the
6376 retval = lun->backend->config_write(
6377 (union ctl_io *)ctsio);
6380 * Someone else has the lock, throw out the request.
6382 ctl_set_already_locked(ctsio);
6383 free(ctsio->kern_data_ptr, M_CTL);
6384 ctl_done((union ctl_io *)ctsio);
6387 * Set the return value so that ctl_do_mode_select()
6388 * won't try to complete the command. We already
6389 * completed it here.
6391 retval = CTL_RETVAL_ERROR;
6393 } else if (softc->aps_locked_lun == lun->lun) {
6395 * This LUN is locked, so pass the unlock request to the
6398 retval = lun->backend->config_write((union ctl_io *)ctsio);
6400 mtx_unlock(&softc->ctl_lock);
6406 ctl_debugconf_sp_select_handler(struct ctl_scsiio *ctsio,
6407 struct ctl_page_index *page_index,
6413 c = ((struct copan_debugconf_subpage *)page_ptr)->ctl_time_io_secs;
6418 CTL_DEBUG_PRINT(("set ctl_time_io_secs to %d\n", ctl_time_io_secs));
6419 printf("set ctl_time_io_secs to %d\n", ctl_time_io_secs);
6420 printf("page data:");
6422 printf(" %.2x",page_ptr[i]);
6428 ctl_debugconf_sp_sense_handler(struct ctl_scsiio *ctsio,
6429 struct ctl_page_index *page_index,
6432 struct copan_debugconf_subpage *page;
6434 page = (struct copan_debugconf_subpage *)page_index->page_data +
6435 (page_index->page_len * pc);
6438 case SMS_PAGE_CTRL_CHANGEABLE >> 6:
6439 case SMS_PAGE_CTRL_DEFAULT >> 6:
6440 case SMS_PAGE_CTRL_SAVED >> 6:
6442 * We don't update the changable or default bits for this page.
6445 case SMS_PAGE_CTRL_CURRENT >> 6:
6446 page->ctl_time_io_secs[0] = ctl_time_io_secs >> 8;
6447 page->ctl_time_io_secs[1] = ctl_time_io_secs >> 0;
6451 EPRINT(0, "Invalid PC %d!!", pc);
6452 #endif /* NEEDTOPORT */
6460 ctl_do_mode_select(union ctl_io *io)
6462 struct scsi_mode_page_header *page_header;
6463 struct ctl_page_index *page_index;
6464 struct ctl_scsiio *ctsio;
6465 int control_dev, page_len;
6466 int page_len_offset, page_len_size;
6467 union ctl_modepage_info *modepage_info;
6468 struct ctl_lun *lun;
6469 int *len_left, *len_used;
6472 ctsio = &io->scsiio;
6475 retval = CTL_RETVAL_COMPLETE;
6477 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
6479 if (lun->be_lun->lun_type != T_DIRECT)
6484 modepage_info = (union ctl_modepage_info *)
6485 ctsio->io_hdr.ctl_private[CTL_PRIV_MODEPAGE].bytes;
6486 len_left = &modepage_info->header.len_left;
6487 len_used = &modepage_info->header.len_used;
6491 page_header = (struct scsi_mode_page_header *)
6492 (ctsio->kern_data_ptr + *len_used);
6494 if (*len_left == 0) {
6495 free(ctsio->kern_data_ptr, M_CTL);
6496 ctl_set_success(ctsio);
6497 ctl_done((union ctl_io *)ctsio);
6498 return (CTL_RETVAL_COMPLETE);
6499 } else if (*len_left < sizeof(struct scsi_mode_page_header)) {
6501 free(ctsio->kern_data_ptr, M_CTL);
6502 ctl_set_param_len_error(ctsio);
6503 ctl_done((union ctl_io *)ctsio);
6504 return (CTL_RETVAL_COMPLETE);
6506 } else if ((page_header->page_code & SMPH_SPF)
6507 && (*len_left < sizeof(struct scsi_mode_page_header_sp))) {
6509 free(ctsio->kern_data_ptr, M_CTL);
6510 ctl_set_param_len_error(ctsio);
6511 ctl_done((union ctl_io *)ctsio);
6512 return (CTL_RETVAL_COMPLETE);
6517 * XXX KDM should we do something with the block descriptor?
6519 for (i = 0; i < CTL_NUM_MODE_PAGES; i++) {
6521 if ((control_dev != 0)
6522 && (lun->mode_pages.index[i].page_flags &
6523 CTL_PAGE_FLAG_DISK_ONLY))
6526 if ((lun->mode_pages.index[i].page_code & SMPH_PC_MASK) !=
6527 (page_header->page_code & SMPH_PC_MASK))
6531 * If neither page has a subpage code, then we've got a
6534 if (((lun->mode_pages.index[i].page_code & SMPH_SPF) == 0)
6535 && ((page_header->page_code & SMPH_SPF) == 0)) {
6536 page_index = &lun->mode_pages.index[i];
6537 page_len = page_header->page_length;
6542 * If both pages have subpages, then the subpage numbers
6545 if ((lun->mode_pages.index[i].page_code & SMPH_SPF)
6546 && (page_header->page_code & SMPH_SPF)) {
6547 struct scsi_mode_page_header_sp *sph;
6549 sph = (struct scsi_mode_page_header_sp *)page_header;
6551 if (lun->mode_pages.index[i].subpage ==
6553 page_index = &lun->mode_pages.index[i];
6554 page_len = scsi_2btoul(sph->page_length);
6561 * If we couldn't find the page, or if we don't have a mode select
6562 * handler for it, send back an error to the user.
6564 if ((page_index == NULL)
6565 || (page_index->select_handler == NULL)) {
6566 ctl_set_invalid_field(ctsio,
6569 /*field*/ *len_used,
6572 free(ctsio->kern_data_ptr, M_CTL);
6573 ctl_done((union ctl_io *)ctsio);
6574 return (CTL_RETVAL_COMPLETE);
6577 if (page_index->page_code & SMPH_SPF) {
6578 page_len_offset = 2;
6582 page_len_offset = 1;
6586 * If the length the initiator gives us isn't the one we specify in
6587 * the mode page header, or if they didn't specify enough data in
6588 * the CDB to avoid truncating this page, kick out the request.
6590 if ((page_len != (page_index->page_len - page_len_offset -
6592 || (*len_left < page_index->page_len)) {
6595 ctl_set_invalid_field(ctsio,
6598 /*field*/ *len_used + page_len_offset,
6601 free(ctsio->kern_data_ptr, M_CTL);
6602 ctl_done((union ctl_io *)ctsio);
6603 return (CTL_RETVAL_COMPLETE);
6607 * Run through the mode page, checking to make sure that the bits
6608 * the user changed are actually legal for him to change.
6610 for (i = 0; i < page_index->page_len; i++) {
6611 uint8_t *user_byte, *change_mask, *current_byte;
6615 user_byte = (uint8_t *)page_header + i;
6616 change_mask = page_index->page_data +
6617 (page_index->page_len * CTL_PAGE_CHANGEABLE) + i;
6618 current_byte = page_index->page_data +
6619 (page_index->page_len * CTL_PAGE_CURRENT) + i;
6622 * Check to see whether the user set any bits in this byte
6623 * that he is not allowed to set.
6625 if ((*user_byte & ~(*change_mask)) ==
6626 (*current_byte & ~(*change_mask)))
6630 * Go through bit by bit to determine which one is illegal.
6633 for (j = 7; j >= 0; j--) {
6634 if ((((1 << i) & ~(*change_mask)) & *user_byte) !=
6635 (((1 << i) & ~(*change_mask)) & *current_byte)) {
6640 ctl_set_invalid_field(ctsio,
6643 /*field*/ *len_used + i,
6646 free(ctsio->kern_data_ptr, M_CTL);
6647 ctl_done((union ctl_io *)ctsio);
6648 return (CTL_RETVAL_COMPLETE);
6652 * Decrement these before we call the page handler, since we may
6653 * end up getting called back one way or another before the handler
6654 * returns to this context.
6656 *len_left -= page_index->page_len;
6657 *len_used += page_index->page_len;
6659 retval = page_index->select_handler(ctsio, page_index,
6660 (uint8_t *)page_header);
6663 * If the page handler returns CTL_RETVAL_QUEUED, then we need to
6664 * wait until this queued command completes to finish processing
6665 * the mode page. If it returns anything other than
6666 * CTL_RETVAL_COMPLETE (e.g. CTL_RETVAL_ERROR), then it should have
6667 * already set the sense information, freed the data pointer, and
6668 * completed the io for us.
6670 if (retval != CTL_RETVAL_COMPLETE)
6671 goto bailout_no_done;
6674 * If the initiator sent us more than one page, parse the next one.
6679 ctl_set_success(ctsio);
6680 free(ctsio->kern_data_ptr, M_CTL);
6681 ctl_done((union ctl_io *)ctsio);
6685 return (CTL_RETVAL_COMPLETE);
6690 ctl_mode_select(struct ctl_scsiio *ctsio)
6692 int param_len, pf, sp;
6693 int header_size, bd_len;
6694 int len_left, len_used;
6695 struct ctl_page_index *page_index;
6696 struct ctl_lun *lun;
6697 int control_dev, page_len;
6698 union ctl_modepage_info *modepage_info;
6710 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
6712 if (lun->be_lun->lun_type != T_DIRECT)
6717 switch (ctsio->cdb[0]) {
6718 case MODE_SELECT_6: {
6719 struct scsi_mode_select_6 *cdb;
6721 cdb = (struct scsi_mode_select_6 *)ctsio->cdb;
6723 pf = (cdb->byte2 & SMS_PF) ? 1 : 0;
6724 sp = (cdb->byte2 & SMS_SP) ? 1 : 0;
6726 param_len = cdb->length;
6727 header_size = sizeof(struct scsi_mode_header_6);
6730 case MODE_SELECT_10: {
6731 struct scsi_mode_select_10 *cdb;
6733 cdb = (struct scsi_mode_select_10 *)ctsio->cdb;
6735 pf = (cdb->byte2 & SMS_PF) ? 1 : 0;
6736 sp = (cdb->byte2 & SMS_SP) ? 1 : 0;
6738 param_len = scsi_2btoul(cdb->length);
6739 header_size = sizeof(struct scsi_mode_header_10);
6743 ctl_set_invalid_opcode(ctsio);
6744 ctl_done((union ctl_io *)ctsio);
6745 return (CTL_RETVAL_COMPLETE);
6746 break; /* NOTREACHED */
6751 * "A parameter list length of zero indicates that the Data-Out Buffer
6752 * shall be empty. This condition shall not be considered as an error."
6754 if (param_len == 0) {
6755 ctl_set_success(ctsio);
6756 ctl_done((union ctl_io *)ctsio);
6757 return (CTL_RETVAL_COMPLETE);
6761 * Since we'll hit this the first time through, prior to
6762 * allocation, we don't need to free a data buffer here.
6764 if (param_len < header_size) {
6765 ctl_set_param_len_error(ctsio);
6766 ctl_done((union ctl_io *)ctsio);
6767 return (CTL_RETVAL_COMPLETE);
6771 * Allocate the data buffer and grab the user's data. In theory,
6772 * we shouldn't have to sanity check the parameter list length here
6773 * because the maximum size is 64K. We should be able to malloc
6774 * that much without too many problems.
6776 if ((ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0) {
6777 ctsio->kern_data_ptr = malloc(param_len, M_CTL, M_WAITOK);
6778 ctsio->kern_data_len = param_len;
6779 ctsio->kern_total_len = param_len;
6780 ctsio->kern_data_resid = 0;
6781 ctsio->kern_rel_offset = 0;
6782 ctsio->kern_sg_entries = 0;
6783 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
6784 ctsio->be_move_done = ctl_config_move_done;
6785 ctl_datamove((union ctl_io *)ctsio);
6787 return (CTL_RETVAL_COMPLETE);
6790 switch (ctsio->cdb[0]) {
6791 case MODE_SELECT_6: {
6792 struct scsi_mode_header_6 *mh6;
6794 mh6 = (struct scsi_mode_header_6 *)ctsio->kern_data_ptr;
6795 bd_len = mh6->blk_desc_len;
6798 case MODE_SELECT_10: {
6799 struct scsi_mode_header_10 *mh10;
6801 mh10 = (struct scsi_mode_header_10 *)ctsio->kern_data_ptr;
6802 bd_len = scsi_2btoul(mh10->blk_desc_len);
6806 panic("Invalid CDB type %#x", ctsio->cdb[0]);
6810 if (param_len < (header_size + bd_len)) {
6811 free(ctsio->kern_data_ptr, M_CTL);
6812 ctl_set_param_len_error(ctsio);
6813 ctl_done((union ctl_io *)ctsio);
6814 return (CTL_RETVAL_COMPLETE);
6818 * Set the IO_CONT flag, so that if this I/O gets passed to
6819 * ctl_config_write_done(), it'll get passed back to
6820 * ctl_do_mode_select() for further processing, or completion if
6823 ctsio->io_hdr.flags |= CTL_FLAG_IO_CONT;
6824 ctsio->io_cont = ctl_do_mode_select;
6826 modepage_info = (union ctl_modepage_info *)
6827 ctsio->io_hdr.ctl_private[CTL_PRIV_MODEPAGE].bytes;
6829 memset(modepage_info, 0, sizeof(*modepage_info));
6831 len_left = param_len - header_size - bd_len;
6832 len_used = header_size + bd_len;
6834 modepage_info->header.len_left = len_left;
6835 modepage_info->header.len_used = len_used;
6837 return (ctl_do_mode_select((union ctl_io *)ctsio));
6841 ctl_mode_sense(struct ctl_scsiio *ctsio)
6843 struct ctl_lun *lun;
6844 int pc, page_code, dbd, llba, subpage;
6845 int alloc_len, page_len, header_len, total_len;
6846 struct scsi_mode_block_descr *block_desc;
6847 struct ctl_page_index *page_index;
6855 CTL_DEBUG_PRINT(("ctl_mode_sense\n"));
6857 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
6859 if (lun->be_lun->lun_type != T_DIRECT)
6864 if (lun->flags & CTL_LUN_PR_RESERVED) {
6868 * XXX KDM need a lock here.
6870 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
6871 if ((lun->res_type == SPR_TYPE_EX_AC
6872 && residx != lun->pr_res_idx)
6873 || ((lun->res_type == SPR_TYPE_EX_AC_RO
6874 || lun->res_type == SPR_TYPE_EX_AC_AR)
6875 && !lun->per_res[residx].registered)) {
6876 ctl_set_reservation_conflict(ctsio);
6877 ctl_done((union ctl_io *)ctsio);
6878 return (CTL_RETVAL_COMPLETE);
6882 switch (ctsio->cdb[0]) {
6883 case MODE_SENSE_6: {
6884 struct scsi_mode_sense_6 *cdb;
6886 cdb = (struct scsi_mode_sense_6 *)ctsio->cdb;
6888 header_len = sizeof(struct scsi_mode_hdr_6);
6889 if (cdb->byte2 & SMS_DBD)
6892 header_len += sizeof(struct scsi_mode_block_descr);
6894 pc = (cdb->page & SMS_PAGE_CTRL_MASK) >> 6;
6895 page_code = cdb->page & SMS_PAGE_CODE;
6896 subpage = cdb->subpage;
6897 alloc_len = cdb->length;
6900 case MODE_SENSE_10: {
6901 struct scsi_mode_sense_10 *cdb;
6903 cdb = (struct scsi_mode_sense_10 *)ctsio->cdb;
6905 header_len = sizeof(struct scsi_mode_hdr_10);
6907 if (cdb->byte2 & SMS_DBD)
6910 header_len += sizeof(struct scsi_mode_block_descr);
6911 if (cdb->byte2 & SMS10_LLBAA)
6913 pc = (cdb->page & SMS_PAGE_CTRL_MASK) >> 6;
6914 page_code = cdb->page & SMS_PAGE_CODE;
6915 subpage = cdb->subpage;
6916 alloc_len = scsi_2btoul(cdb->length);
6920 ctl_set_invalid_opcode(ctsio);
6921 ctl_done((union ctl_io *)ctsio);
6922 return (CTL_RETVAL_COMPLETE);
6923 break; /* NOTREACHED */
6927 * We have to make a first pass through to calculate the size of
6928 * the pages that match the user's query. Then we allocate enough
6929 * memory to hold it, and actually copy the data into the buffer.
6931 switch (page_code) {
6932 case SMS_ALL_PAGES_PAGE: {
6938 * At the moment, values other than 0 and 0xff here are
6939 * reserved according to SPC-3.
6941 if ((subpage != SMS_SUBPAGE_PAGE_0)
6942 && (subpage != SMS_SUBPAGE_ALL)) {
6943 ctl_set_invalid_field(ctsio,
6949 ctl_done((union ctl_io *)ctsio);
6950 return (CTL_RETVAL_COMPLETE);
6953 for (i = 0; i < CTL_NUM_MODE_PAGES; i++) {
6954 if ((control_dev != 0)
6955 && (lun->mode_pages.index[i].page_flags &
6956 CTL_PAGE_FLAG_DISK_ONLY))
6960 * We don't use this subpage if the user didn't
6961 * request all subpages.
6963 if ((lun->mode_pages.index[i].subpage != 0)
6964 && (subpage == SMS_SUBPAGE_PAGE_0))
6968 printf("found page %#x len %d\n",
6969 lun->mode_pages.index[i].page_code &
6971 lun->mode_pages.index[i].page_len);
6973 page_len += lun->mode_pages.index[i].page_len;
6982 for (i = 0; i < CTL_NUM_MODE_PAGES; i++) {
6983 /* Look for the right page code */
6984 if ((lun->mode_pages.index[i].page_code &
6985 SMPH_PC_MASK) != page_code)
6988 /* Look for the right subpage or the subpage wildcard*/
6989 if ((lun->mode_pages.index[i].subpage != subpage)
6990 && (subpage != SMS_SUBPAGE_ALL))
6993 /* Make sure the page is supported for this dev type */
6994 if ((control_dev != 0)
6995 && (lun->mode_pages.index[i].page_flags &
6996 CTL_PAGE_FLAG_DISK_ONLY))
7000 printf("found page %#x len %d\n",
7001 lun->mode_pages.index[i].page_code &
7003 lun->mode_pages.index[i].page_len);
7006 page_len += lun->mode_pages.index[i].page_len;
7009 if (page_len == 0) {
7010 ctl_set_invalid_field(ctsio,
7016 ctl_done((union ctl_io *)ctsio);
7017 return (CTL_RETVAL_COMPLETE);
7023 total_len = header_len + page_len;
7025 printf("header_len = %d, page_len = %d, total_len = %d\n",
7026 header_len, page_len, total_len);
7029 ctsio->kern_data_ptr = malloc(total_len, M_CTL, M_WAITOK | M_ZERO);
7030 ctsio->kern_sg_entries = 0;
7031 ctsio->kern_data_resid = 0;
7032 ctsio->kern_rel_offset = 0;
7033 if (total_len < alloc_len) {
7034 ctsio->residual = alloc_len - total_len;
7035 ctsio->kern_data_len = total_len;
7036 ctsio->kern_total_len = total_len;
7038 ctsio->residual = 0;
7039 ctsio->kern_data_len = alloc_len;
7040 ctsio->kern_total_len = alloc_len;
7043 switch (ctsio->cdb[0]) {
7044 case MODE_SENSE_6: {
7045 struct scsi_mode_hdr_6 *header;
7047 header = (struct scsi_mode_hdr_6 *)ctsio->kern_data_ptr;
7049 header->datalen = ctl_min(total_len - 1, 254);
7050 if (control_dev == 0)
7051 header->dev_specific = 0x10; /* DPOFUA */
7053 header->block_descr_len = 0;
7055 header->block_descr_len =
7056 sizeof(struct scsi_mode_block_descr);
7057 block_desc = (struct scsi_mode_block_descr *)&header[1];
7060 case MODE_SENSE_10: {
7061 struct scsi_mode_hdr_10 *header;
7064 header = (struct scsi_mode_hdr_10 *)ctsio->kern_data_ptr;
7066 datalen = ctl_min(total_len - 2, 65533);
7067 scsi_ulto2b(datalen, header->datalen);
7068 if (control_dev == 0)
7069 header->dev_specific = 0x10; /* DPOFUA */
7071 scsi_ulto2b(0, header->block_descr_len);
7073 scsi_ulto2b(sizeof(struct scsi_mode_block_descr),
7074 header->block_descr_len);
7075 block_desc = (struct scsi_mode_block_descr *)&header[1];
7079 panic("invalid CDB type %#x", ctsio->cdb[0]);
7080 break; /* NOTREACHED */
7084 * If we've got a disk, use its blocksize in the block
7085 * descriptor. Otherwise, just set it to 0.
7088 if (control_dev == 0)
7089 scsi_ulto3b(lun->be_lun->blocksize,
7090 block_desc->block_len);
7092 scsi_ulto3b(0, block_desc->block_len);
7095 switch (page_code) {
7096 case SMS_ALL_PAGES_PAGE: {
7099 data_used = header_len;
7100 for (i = 0; i < CTL_NUM_MODE_PAGES; i++) {
7101 struct ctl_page_index *page_index;
7103 page_index = &lun->mode_pages.index[i];
7105 if ((control_dev != 0)
7106 && (page_index->page_flags &
7107 CTL_PAGE_FLAG_DISK_ONLY))
7111 * We don't use this subpage if the user didn't
7112 * request all subpages. We already checked (above)
7113 * to make sure the user only specified a subpage
7114 * of 0 or 0xff in the SMS_ALL_PAGES_PAGE case.
7116 if ((page_index->subpage != 0)
7117 && (subpage == SMS_SUBPAGE_PAGE_0))
7121 * Call the handler, if it exists, to update the
7122 * page to the latest values.
7124 if (page_index->sense_handler != NULL)
7125 page_index->sense_handler(ctsio, page_index,pc);
7127 memcpy(ctsio->kern_data_ptr + data_used,
7128 page_index->page_data +
7129 (page_index->page_len * pc),
7130 page_index->page_len);
7131 data_used += page_index->page_len;
7138 data_used = header_len;
7140 for (i = 0; i < CTL_NUM_MODE_PAGES; i++) {
7141 struct ctl_page_index *page_index;
7143 page_index = &lun->mode_pages.index[i];
7145 /* Look for the right page code */
7146 if ((page_index->page_code & SMPH_PC_MASK) != page_code)
7149 /* Look for the right subpage or the subpage wildcard*/
7150 if ((page_index->subpage != subpage)
7151 && (subpage != SMS_SUBPAGE_ALL))
7154 /* Make sure the page is supported for this dev type */
7155 if ((control_dev != 0)
7156 && (page_index->page_flags &
7157 CTL_PAGE_FLAG_DISK_ONLY))
7161 * Call the handler, if it exists, to update the
7162 * page to the latest values.
7164 if (page_index->sense_handler != NULL)
7165 page_index->sense_handler(ctsio, page_index,pc);
7167 memcpy(ctsio->kern_data_ptr + data_used,
7168 page_index->page_data +
7169 (page_index->page_len * pc),
7170 page_index->page_len);
7171 data_used += page_index->page_len;
7177 ctsio->scsi_status = SCSI_STATUS_OK;
7179 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7180 ctsio->be_move_done = ctl_config_move_done;
7181 ctl_datamove((union ctl_io *)ctsio);
7183 return (CTL_RETVAL_COMPLETE);
7187 ctl_read_capacity(struct ctl_scsiio *ctsio)
7189 struct scsi_read_capacity *cdb;
7190 struct scsi_read_capacity_data *data;
7191 struct ctl_lun *lun;
7194 CTL_DEBUG_PRINT(("ctl_read_capacity\n"));
7196 cdb = (struct scsi_read_capacity *)ctsio->cdb;
7198 lba = scsi_4btoul(cdb->addr);
7199 if (((cdb->pmi & SRC_PMI) == 0)
7201 ctl_set_invalid_field(/*ctsio*/ ctsio,
7207 ctl_done((union ctl_io *)ctsio);
7208 return (CTL_RETVAL_COMPLETE);
7211 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
7213 ctsio->kern_data_ptr = malloc(sizeof(*data), M_CTL, M_WAITOK | M_ZERO);
7214 data = (struct scsi_read_capacity_data *)ctsio->kern_data_ptr;
7215 ctsio->residual = 0;
7216 ctsio->kern_data_len = sizeof(*data);
7217 ctsio->kern_total_len = sizeof(*data);
7218 ctsio->kern_data_resid = 0;
7219 ctsio->kern_rel_offset = 0;
7220 ctsio->kern_sg_entries = 0;
7223 * If the maximum LBA is greater than 0xfffffffe, the user must
7224 * issue a SERVICE ACTION IN (16) command, with the read capacity
7225 * serivce action set.
7227 if (lun->be_lun->maxlba > 0xfffffffe)
7228 scsi_ulto4b(0xffffffff, data->addr);
7230 scsi_ulto4b(lun->be_lun->maxlba, data->addr);
7233 * XXX KDM this may not be 512 bytes...
7235 scsi_ulto4b(lun->be_lun->blocksize, data->length);
7237 ctsio->scsi_status = SCSI_STATUS_OK;
7239 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7240 ctsio->be_move_done = ctl_config_move_done;
7241 ctl_datamove((union ctl_io *)ctsio);
7243 return (CTL_RETVAL_COMPLETE);
7247 ctl_read_capacity_16(struct ctl_scsiio *ctsio)
7249 struct scsi_read_capacity_16 *cdb;
7250 struct scsi_read_capacity_data_long *data;
7251 struct ctl_lun *lun;
7255 CTL_DEBUG_PRINT(("ctl_read_capacity_16\n"));
7257 cdb = (struct scsi_read_capacity_16 *)ctsio->cdb;
7259 alloc_len = scsi_4btoul(cdb->alloc_len);
7260 lba = scsi_8btou64(cdb->addr);
7262 if ((cdb->reladr & SRC16_PMI)
7264 ctl_set_invalid_field(/*ctsio*/ ctsio,
7270 ctl_done((union ctl_io *)ctsio);
7271 return (CTL_RETVAL_COMPLETE);
7274 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
7276 ctsio->kern_data_ptr = malloc(sizeof(*data), M_CTL, M_WAITOK | M_ZERO);
7277 data = (struct scsi_read_capacity_data_long *)ctsio->kern_data_ptr;
7279 if (sizeof(*data) < alloc_len) {
7280 ctsio->residual = alloc_len - sizeof(*data);
7281 ctsio->kern_data_len = sizeof(*data);
7282 ctsio->kern_total_len = sizeof(*data);
7284 ctsio->residual = 0;
7285 ctsio->kern_data_len = alloc_len;
7286 ctsio->kern_total_len = alloc_len;
7288 ctsio->kern_data_resid = 0;
7289 ctsio->kern_rel_offset = 0;
7290 ctsio->kern_sg_entries = 0;
7292 scsi_u64to8b(lun->be_lun->maxlba, data->addr);
7293 /* XXX KDM this may not be 512 bytes... */
7294 scsi_ulto4b(lun->be_lun->blocksize, data->length);
7295 data->prot_lbppbe = lun->be_lun->pblockexp & SRC16_LBPPBE;
7296 scsi_ulto2b(lun->be_lun->pblockoff & SRC16_LALBA_A, data->lalba_lbp);
7297 if (lun->be_lun->flags & CTL_LUN_FLAG_UNMAP)
7298 data->lalba_lbp[0] |= SRC16_LBPME | SRC16_LBPRZ;
7300 ctsio->scsi_status = SCSI_STATUS_OK;
7302 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7303 ctsio->be_move_done = ctl_config_move_done;
7304 ctl_datamove((union ctl_io *)ctsio);
7306 return (CTL_RETVAL_COMPLETE);
7310 ctl_report_tagret_port_groups(struct ctl_scsiio *ctsio)
7312 struct scsi_maintenance_in *cdb;
7314 int alloc_len, ext, total_len = 0, g, p, pc, pg;
7315 int num_target_port_groups, num_target_ports, single;
7316 struct ctl_lun *lun;
7317 struct ctl_softc *softc;
7318 struct ctl_port *port;
7319 struct scsi_target_group_data *rtg_ptr;
7320 struct scsi_target_group_data_extended *rtg_ext_ptr;
7321 struct scsi_target_port_group_descriptor *tpg_desc;
7323 CTL_DEBUG_PRINT(("ctl_report_tagret_port_groups\n"));
7325 cdb = (struct scsi_maintenance_in *)ctsio->cdb;
7326 softc = control_softc;
7327 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
7329 retval = CTL_RETVAL_COMPLETE;
7331 switch (cdb->byte2 & STG_PDF_MASK) {
7332 case STG_PDF_LENGTH:
7335 case STG_PDF_EXTENDED:
7339 ctl_set_invalid_field(/*ctsio*/ ctsio,
7345 ctl_done((union ctl_io *)ctsio);
7349 single = ctl_is_single;
7351 num_target_port_groups = 1;
7353 num_target_port_groups = NUM_TARGET_PORT_GROUPS;
7354 num_target_ports = 0;
7355 mtx_lock(&softc->ctl_lock);
7356 STAILQ_FOREACH(port, &softc->port_list, links) {
7357 if ((port->status & CTL_PORT_STATUS_ONLINE) == 0)
7359 if (ctl_map_lun_back(port->targ_port, lun->lun) >= CTL_MAX_LUNS)
7363 mtx_unlock(&softc->ctl_lock);
7366 total_len = sizeof(struct scsi_target_group_data_extended);
7368 total_len = sizeof(struct scsi_target_group_data);
7369 total_len += sizeof(struct scsi_target_port_group_descriptor) *
7370 num_target_port_groups +
7371 sizeof(struct scsi_target_port_descriptor) *
7372 num_target_ports * num_target_port_groups;
7374 alloc_len = scsi_4btoul(cdb->length);
7376 ctsio->kern_data_ptr = malloc(total_len, M_CTL, M_WAITOK | M_ZERO);
7378 ctsio->kern_sg_entries = 0;
7380 if (total_len < alloc_len) {
7381 ctsio->residual = alloc_len - total_len;
7382 ctsio->kern_data_len = total_len;
7383 ctsio->kern_total_len = total_len;
7385 ctsio->residual = 0;
7386 ctsio->kern_data_len = alloc_len;
7387 ctsio->kern_total_len = alloc_len;
7389 ctsio->kern_data_resid = 0;
7390 ctsio->kern_rel_offset = 0;
7393 rtg_ext_ptr = (struct scsi_target_group_data_extended *)
7394 ctsio->kern_data_ptr;
7395 scsi_ulto4b(total_len - 4, rtg_ext_ptr->length);
7396 rtg_ext_ptr->format_type = 0x10;
7397 rtg_ext_ptr->implicit_transition_time = 0;
7398 tpg_desc = &rtg_ext_ptr->groups[0];
7400 rtg_ptr = (struct scsi_target_group_data *)
7401 ctsio->kern_data_ptr;
7402 scsi_ulto4b(total_len - 4, rtg_ptr->length);
7403 tpg_desc = &rtg_ptr->groups[0];
7406 pg = ctsio->io_hdr.nexus.targ_port / CTL_MAX_PORTS;
7407 mtx_lock(&softc->ctl_lock);
7408 for (g = 0; g < num_target_port_groups; g++) {
7410 tpg_desc->pref_state = TPG_PRIMARY |
7411 TPG_ASYMMETRIC_ACCESS_OPTIMIZED;
7413 tpg_desc->pref_state =
7414 TPG_ASYMMETRIC_ACCESS_NONOPTIMIZED;
7415 tpg_desc->support = TPG_AO_SUP;
7417 tpg_desc->support |= TPG_AN_SUP;
7418 scsi_ulto2b(g + 1, tpg_desc->target_port_group);
7419 tpg_desc->status = TPG_IMPLICIT;
7421 STAILQ_FOREACH(port, &softc->port_list, links) {
7422 if ((port->status & CTL_PORT_STATUS_ONLINE) == 0)
7424 if (ctl_map_lun_back(port->targ_port, lun->lun) >=
7427 p = port->targ_port % CTL_MAX_PORTS + g * CTL_MAX_PORTS;
7428 scsi_ulto2b(p, tpg_desc->descriptors[pc].
7429 relative_target_port_identifier);
7432 tpg_desc->target_port_count = pc;
7433 tpg_desc = (struct scsi_target_port_group_descriptor *)
7434 &tpg_desc->descriptors[pc];
7436 mtx_unlock(&softc->ctl_lock);
7438 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7439 ctsio->be_move_done = ctl_config_move_done;
7441 CTL_DEBUG_PRINT(("buf = %x %x %x %x %x %x %x %x\n",
7442 ctsio->kern_data_ptr[0], ctsio->kern_data_ptr[1],
7443 ctsio->kern_data_ptr[2], ctsio->kern_data_ptr[3],
7444 ctsio->kern_data_ptr[4], ctsio->kern_data_ptr[5],
7445 ctsio->kern_data_ptr[6], ctsio->kern_data_ptr[7]));
7447 ctl_datamove((union ctl_io *)ctsio);
7452 ctl_report_supported_opcodes(struct ctl_scsiio *ctsio)
7454 struct ctl_lun *lun;
7455 struct scsi_report_supported_opcodes *cdb;
7456 const struct ctl_cmd_entry *entry, *sentry;
7457 struct scsi_report_supported_opcodes_all *all;
7458 struct scsi_report_supported_opcodes_descr *descr;
7459 struct scsi_report_supported_opcodes_one *one;
7461 int alloc_len, total_len;
7462 int opcode, service_action, i, j, num;
7464 CTL_DEBUG_PRINT(("ctl_report_supported_opcodes\n"));
7466 cdb = (struct scsi_report_supported_opcodes *)ctsio->cdb;
7467 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
7469 retval = CTL_RETVAL_COMPLETE;
7471 opcode = cdb->requested_opcode;
7472 service_action = scsi_2btoul(cdb->requested_service_action);
7473 switch (cdb->options & RSO_OPTIONS_MASK) {
7474 case RSO_OPTIONS_ALL:
7476 for (i = 0; i < 256; i++) {
7477 entry = &ctl_cmd_table[i];
7478 if (entry->flags & CTL_CMD_FLAG_SA5) {
7479 for (j = 0; j < 32; j++) {
7480 sentry = &((const struct ctl_cmd_entry *)
7482 if (ctl_cmd_applicable(
7483 lun->be_lun->lun_type, sentry))
7487 if (ctl_cmd_applicable(lun->be_lun->lun_type,
7492 total_len = sizeof(struct scsi_report_supported_opcodes_all) +
7493 num * sizeof(struct scsi_report_supported_opcodes_descr);
7495 case RSO_OPTIONS_OC:
7496 if (ctl_cmd_table[opcode].flags & CTL_CMD_FLAG_SA5) {
7497 ctl_set_invalid_field(/*ctsio*/ ctsio,
7503 ctl_done((union ctl_io *)ctsio);
7504 return (CTL_RETVAL_COMPLETE);
7506 total_len = sizeof(struct scsi_report_supported_opcodes_one) + 32;
7508 case RSO_OPTIONS_OC_SA:
7509 if ((ctl_cmd_table[opcode].flags & CTL_CMD_FLAG_SA5) == 0 ||
7510 service_action >= 32) {
7511 ctl_set_invalid_field(/*ctsio*/ ctsio,
7517 ctl_done((union ctl_io *)ctsio);
7518 return (CTL_RETVAL_COMPLETE);
7520 total_len = sizeof(struct scsi_report_supported_opcodes_one) + 32;
7523 ctl_set_invalid_field(/*ctsio*/ ctsio,
7529 ctl_done((union ctl_io *)ctsio);
7530 return (CTL_RETVAL_COMPLETE);
7533 alloc_len = scsi_4btoul(cdb->length);
7535 ctsio->kern_data_ptr = malloc(total_len, M_CTL, M_WAITOK | M_ZERO);
7537 ctsio->kern_sg_entries = 0;
7539 if (total_len < alloc_len) {
7540 ctsio->residual = alloc_len - total_len;
7541 ctsio->kern_data_len = total_len;
7542 ctsio->kern_total_len = total_len;
7544 ctsio->residual = 0;
7545 ctsio->kern_data_len = alloc_len;
7546 ctsio->kern_total_len = alloc_len;
7548 ctsio->kern_data_resid = 0;
7549 ctsio->kern_rel_offset = 0;
7551 switch (cdb->options & RSO_OPTIONS_MASK) {
7552 case RSO_OPTIONS_ALL:
7553 all = (struct scsi_report_supported_opcodes_all *)
7554 ctsio->kern_data_ptr;
7556 for (i = 0; i < 256; i++) {
7557 entry = &ctl_cmd_table[i];
7558 if (entry->flags & CTL_CMD_FLAG_SA5) {
7559 for (j = 0; j < 32; j++) {
7560 sentry = &((const struct ctl_cmd_entry *)
7562 if (!ctl_cmd_applicable(
7563 lun->be_lun->lun_type, sentry))
7565 descr = &all->descr[num++];
7567 scsi_ulto2b(j, descr->service_action);
7568 descr->flags = RSO_SERVACTV;
7569 scsi_ulto2b(sentry->length,
7573 if (!ctl_cmd_applicable(lun->be_lun->lun_type,
7576 descr = &all->descr[num++];
7578 scsi_ulto2b(0, descr->service_action);
7580 scsi_ulto2b(entry->length, descr->cdb_length);
7584 num * sizeof(struct scsi_report_supported_opcodes_descr),
7587 case RSO_OPTIONS_OC:
7588 one = (struct scsi_report_supported_opcodes_one *)
7589 ctsio->kern_data_ptr;
7590 entry = &ctl_cmd_table[opcode];
7592 case RSO_OPTIONS_OC_SA:
7593 one = (struct scsi_report_supported_opcodes_one *)
7594 ctsio->kern_data_ptr;
7595 entry = &ctl_cmd_table[opcode];
7596 entry = &((const struct ctl_cmd_entry *)
7597 entry->execute)[service_action];
7599 if (ctl_cmd_applicable(lun->be_lun->lun_type, entry)) {
7601 scsi_ulto2b(entry->length, one->cdb_length);
7602 one->cdb_usage[0] = opcode;
7603 memcpy(&one->cdb_usage[1], entry->usage,
7610 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7611 ctsio->be_move_done = ctl_config_move_done;
7613 ctl_datamove((union ctl_io *)ctsio);
7618 ctl_report_supported_tmf(struct ctl_scsiio *ctsio)
7620 struct ctl_lun *lun;
7621 struct scsi_report_supported_tmf *cdb;
7622 struct scsi_report_supported_tmf_data *data;
7624 int alloc_len, total_len;
7626 CTL_DEBUG_PRINT(("ctl_report_supported_tmf\n"));
7628 cdb = (struct scsi_report_supported_tmf *)ctsio->cdb;
7629 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
7631 retval = CTL_RETVAL_COMPLETE;
7633 total_len = sizeof(struct scsi_report_supported_tmf_data);
7634 alloc_len = scsi_4btoul(cdb->length);
7636 ctsio->kern_data_ptr = malloc(total_len, M_CTL, M_WAITOK | M_ZERO);
7638 ctsio->kern_sg_entries = 0;
7640 if (total_len < alloc_len) {
7641 ctsio->residual = alloc_len - total_len;
7642 ctsio->kern_data_len = total_len;
7643 ctsio->kern_total_len = total_len;
7645 ctsio->residual = 0;
7646 ctsio->kern_data_len = alloc_len;
7647 ctsio->kern_total_len = alloc_len;
7649 ctsio->kern_data_resid = 0;
7650 ctsio->kern_rel_offset = 0;
7652 data = (struct scsi_report_supported_tmf_data *)ctsio->kern_data_ptr;
7653 data->byte1 |= RST_ATS | RST_ATSS | RST_CTSS | RST_LURS | RST_TRS;
7654 data->byte2 |= RST_ITNRS;
7656 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7657 ctsio->be_move_done = ctl_config_move_done;
7659 ctl_datamove((union ctl_io *)ctsio);
7664 ctl_report_timestamp(struct ctl_scsiio *ctsio)
7666 struct ctl_lun *lun;
7667 struct scsi_report_timestamp *cdb;
7668 struct scsi_report_timestamp_data *data;
7672 int alloc_len, total_len;
7674 CTL_DEBUG_PRINT(("ctl_report_timestamp\n"));
7676 cdb = (struct scsi_report_timestamp *)ctsio->cdb;
7677 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
7679 retval = CTL_RETVAL_COMPLETE;
7681 total_len = sizeof(struct scsi_report_timestamp_data);
7682 alloc_len = scsi_4btoul(cdb->length);
7684 ctsio->kern_data_ptr = malloc(total_len, M_CTL, M_WAITOK | M_ZERO);
7686 ctsio->kern_sg_entries = 0;
7688 if (total_len < alloc_len) {
7689 ctsio->residual = alloc_len - total_len;
7690 ctsio->kern_data_len = total_len;
7691 ctsio->kern_total_len = total_len;
7693 ctsio->residual = 0;
7694 ctsio->kern_data_len = alloc_len;
7695 ctsio->kern_total_len = alloc_len;
7697 ctsio->kern_data_resid = 0;
7698 ctsio->kern_rel_offset = 0;
7700 data = (struct scsi_report_timestamp_data *)ctsio->kern_data_ptr;
7701 scsi_ulto2b(sizeof(*data) - 2, data->length);
7702 data->origin = RTS_ORIG_OUTSIDE;
7704 timestamp = (int64_t)tv.tv_sec * 1000 + tv.tv_usec / 1000;
7705 scsi_ulto4b(timestamp >> 16, data->timestamp);
7706 scsi_ulto2b(timestamp & 0xffff, &data->timestamp[4]);
7708 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7709 ctsio->be_move_done = ctl_config_move_done;
7711 ctl_datamove((union ctl_io *)ctsio);
7716 ctl_persistent_reserve_in(struct ctl_scsiio *ctsio)
7718 struct scsi_per_res_in *cdb;
7719 int alloc_len, total_len = 0;
7720 /* struct scsi_per_res_in_rsrv in_data; */
7721 struct ctl_lun *lun;
7722 struct ctl_softc *softc;
7724 CTL_DEBUG_PRINT(("ctl_persistent_reserve_in\n"));
7726 softc = control_softc;
7728 cdb = (struct scsi_per_res_in *)ctsio->cdb;
7730 alloc_len = scsi_2btoul(cdb->length);
7732 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
7735 mtx_lock(&lun->lun_lock);
7736 switch (cdb->action) {
7737 case SPRI_RK: /* read keys */
7738 total_len = sizeof(struct scsi_per_res_in_keys) +
7740 sizeof(struct scsi_per_res_key);
7742 case SPRI_RR: /* read reservation */
7743 if (lun->flags & CTL_LUN_PR_RESERVED)
7744 total_len = sizeof(struct scsi_per_res_in_rsrv);
7746 total_len = sizeof(struct scsi_per_res_in_header);
7748 case SPRI_RC: /* report capabilities */
7749 total_len = sizeof(struct scsi_per_res_cap);
7751 case SPRI_RS: /* read full status */
7752 total_len = sizeof(struct scsi_per_res_in_header) +
7753 (sizeof(struct scsi_per_res_in_full_desc) + 256) *
7757 panic("Invalid PR type %x", cdb->action);
7759 mtx_unlock(&lun->lun_lock);
7761 ctsio->kern_data_ptr = malloc(total_len, M_CTL, M_WAITOK | M_ZERO);
7763 if (total_len < alloc_len) {
7764 ctsio->residual = alloc_len - total_len;
7765 ctsio->kern_data_len = total_len;
7766 ctsio->kern_total_len = total_len;
7768 ctsio->residual = 0;
7769 ctsio->kern_data_len = alloc_len;
7770 ctsio->kern_total_len = alloc_len;
7773 ctsio->kern_data_resid = 0;
7774 ctsio->kern_rel_offset = 0;
7775 ctsio->kern_sg_entries = 0;
7777 mtx_lock(&lun->lun_lock);
7778 switch (cdb->action) {
7779 case SPRI_RK: { // read keys
7780 struct scsi_per_res_in_keys *res_keys;
7783 res_keys = (struct scsi_per_res_in_keys*)ctsio->kern_data_ptr;
7786 * We had to drop the lock to allocate our buffer, which
7787 * leaves time for someone to come in with another
7788 * persistent reservation. (That is unlikely, though,
7789 * since this should be the only persistent reservation
7790 * command active right now.)
7792 if (total_len != (sizeof(struct scsi_per_res_in_keys) +
7793 (lun->pr_key_count *
7794 sizeof(struct scsi_per_res_key)))){
7795 mtx_unlock(&lun->lun_lock);
7796 free(ctsio->kern_data_ptr, M_CTL);
7797 printf("%s: reservation length changed, retrying\n",
7802 scsi_ulto4b(lun->PRGeneration, res_keys->header.generation);
7804 scsi_ulto4b(sizeof(struct scsi_per_res_key) *
7805 lun->pr_key_count, res_keys->header.length);
7807 for (i = 0, key_count = 0; i < 2*CTL_MAX_INITIATORS; i++) {
7808 if (!lun->per_res[i].registered)
7812 * We used lun->pr_key_count to calculate the
7813 * size to allocate. If it turns out the number of
7814 * initiators with the registered flag set is
7815 * larger than that (i.e. they haven't been kept in
7816 * sync), we've got a problem.
7818 if (key_count >= lun->pr_key_count) {
7820 csevent_log(CSC_CTL | CSC_SHELF_SW |
7822 csevent_LogType_Fault,
7823 csevent_AlertLevel_Yellow,
7824 csevent_FRU_ShelfController,
7825 csevent_FRU_Firmware,
7826 csevent_FRU_Unknown,
7827 "registered keys %d >= key "
7828 "count %d", key_count,
7834 memcpy(res_keys->keys[key_count].key,
7835 lun->per_res[i].res_key.key,
7836 ctl_min(sizeof(res_keys->keys[key_count].key),
7837 sizeof(lun->per_res[i].res_key)));
7842 case SPRI_RR: { // read reservation
7843 struct scsi_per_res_in_rsrv *res;
7844 int tmp_len, header_only;
7846 res = (struct scsi_per_res_in_rsrv *)ctsio->kern_data_ptr;
7848 scsi_ulto4b(lun->PRGeneration, res->header.generation);
7850 if (lun->flags & CTL_LUN_PR_RESERVED)
7852 tmp_len = sizeof(struct scsi_per_res_in_rsrv);
7853 scsi_ulto4b(sizeof(struct scsi_per_res_in_rsrv_data),
7854 res->header.length);
7857 tmp_len = sizeof(struct scsi_per_res_in_header);
7858 scsi_ulto4b(0, res->header.length);
7863 * We had to drop the lock to allocate our buffer, which
7864 * leaves time for someone to come in with another
7865 * persistent reservation. (That is unlikely, though,
7866 * since this should be the only persistent reservation
7867 * command active right now.)
7869 if (tmp_len != total_len) {
7870 mtx_unlock(&lun->lun_lock);
7871 free(ctsio->kern_data_ptr, M_CTL);
7872 printf("%s: reservation status changed, retrying\n",
7878 * No reservation held, so we're done.
7880 if (header_only != 0)
7884 * If the registration is an All Registrants type, the key
7885 * is 0, since it doesn't really matter.
7887 if (lun->pr_res_idx != CTL_PR_ALL_REGISTRANTS) {
7888 memcpy(res->data.reservation,
7889 &lun->per_res[lun->pr_res_idx].res_key,
7890 sizeof(struct scsi_per_res_key));
7892 res->data.scopetype = lun->res_type;
7895 case SPRI_RC: //report capabilities
7897 struct scsi_per_res_cap *res_cap;
7900 res_cap = (struct scsi_per_res_cap *)ctsio->kern_data_ptr;
7901 scsi_ulto2b(sizeof(*res_cap), res_cap->length);
7902 res_cap->flags2 |= SPRI_TMV | SPRI_ALLOW_5;
7903 type_mask = SPRI_TM_WR_EX_AR |
7909 scsi_ulto2b(type_mask, res_cap->type_mask);
7912 case SPRI_RS: { // read full status
7913 struct scsi_per_res_in_full *res_status;
7914 struct scsi_per_res_in_full_desc *res_desc;
7915 struct ctl_port *port;
7918 res_status = (struct scsi_per_res_in_full*)ctsio->kern_data_ptr;
7921 * We had to drop the lock to allocate our buffer, which
7922 * leaves time for someone to come in with another
7923 * persistent reservation. (That is unlikely, though,
7924 * since this should be the only persistent reservation
7925 * command active right now.)
7927 if (total_len < (sizeof(struct scsi_per_res_in_header) +
7928 (sizeof(struct scsi_per_res_in_full_desc) + 256) *
7929 lun->pr_key_count)){
7930 mtx_unlock(&lun->lun_lock);
7931 free(ctsio->kern_data_ptr, M_CTL);
7932 printf("%s: reservation length changed, retrying\n",
7937 scsi_ulto4b(lun->PRGeneration, res_status->header.generation);
7939 res_desc = &res_status->desc[0];
7940 for (i = 0; i < 2*CTL_MAX_INITIATORS; i++) {
7941 if (!lun->per_res[i].registered)
7944 memcpy(&res_desc->res_key, &lun->per_res[i].res_key.key,
7945 sizeof(res_desc->res_key));
7946 if ((lun->flags & CTL_LUN_PR_RESERVED) &&
7947 (lun->pr_res_idx == i ||
7948 lun->pr_res_idx == CTL_PR_ALL_REGISTRANTS)) {
7949 res_desc->flags = SPRI_FULL_R_HOLDER;
7950 res_desc->scopetype = lun->res_type;
7952 scsi_ulto2b(i / CTL_MAX_INIT_PER_PORT,
7953 res_desc->rel_trgt_port_id);
7955 port = softc->ctl_ports[
7956 ctl_port_idx(i / CTL_MAX_INIT_PER_PORT)];
7958 len = ctl_create_iid(port,
7959 i % CTL_MAX_INIT_PER_PORT,
7960 res_desc->transport_id);
7961 scsi_ulto4b(len, res_desc->additional_length);
7962 res_desc = (struct scsi_per_res_in_full_desc *)
7963 &res_desc->transport_id[len];
7965 scsi_ulto4b((uint8_t *)res_desc - (uint8_t *)&res_status->desc[0],
7966 res_status->header.length);
7971 * This is a bug, because we just checked for this above,
7972 * and should have returned an error.
7974 panic("Invalid PR type %x", cdb->action);
7975 break; /* NOTREACHED */
7977 mtx_unlock(&lun->lun_lock);
7979 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
7980 ctsio->be_move_done = ctl_config_move_done;
7982 CTL_DEBUG_PRINT(("buf = %x %x %x %x %x %x %x %x\n",
7983 ctsio->kern_data_ptr[0], ctsio->kern_data_ptr[1],
7984 ctsio->kern_data_ptr[2], ctsio->kern_data_ptr[3],
7985 ctsio->kern_data_ptr[4], ctsio->kern_data_ptr[5],
7986 ctsio->kern_data_ptr[6], ctsio->kern_data_ptr[7]));
7988 ctl_datamove((union ctl_io *)ctsio);
7990 return (CTL_RETVAL_COMPLETE);
7994 * Returns 0 if ctl_persistent_reserve_out() should continue, non-zero if
7998 ctl_pro_preempt(struct ctl_softc *softc, struct ctl_lun *lun, uint64_t res_key,
7999 uint64_t sa_res_key, uint8_t type, uint32_t residx,
8000 struct ctl_scsiio *ctsio, struct scsi_per_res_out *cdb,
8001 struct scsi_per_res_out_parms* param)
8003 union ctl_ha_msg persis_io;
8009 mtx_lock(&lun->lun_lock);
8010 if (sa_res_key == 0) {
8011 if (lun->pr_res_idx == CTL_PR_ALL_REGISTRANTS) {
8012 /* validate scope and type */
8013 if ((cdb->scope_type & SPR_SCOPE_MASK) !=
8015 mtx_unlock(&lun->lun_lock);
8016 ctl_set_invalid_field(/*ctsio*/ ctsio,
8022 ctl_done((union ctl_io *)ctsio);
8026 if (type>8 || type==2 || type==4 || type==0) {
8027 mtx_unlock(&lun->lun_lock);
8028 ctl_set_invalid_field(/*ctsio*/ ctsio,
8034 ctl_done((union ctl_io *)ctsio);
8038 /* temporarily unregister this nexus */
8039 lun->per_res[residx].registered = 0;
8042 * Unregister everybody else and build UA for
8045 for(i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8046 if (lun->per_res[i].registered == 0)
8050 && i <CTL_MAX_INITIATORS)
8051 lun->pending_ua[i] |=
8053 else if (persis_offset
8054 && i >= persis_offset)
8055 lun->pending_ua[i-persis_offset] |=
8057 lun->per_res[i].registered = 0;
8058 memset(&lun->per_res[i].res_key, 0,
8059 sizeof(struct scsi_per_res_key));
8061 lun->per_res[residx].registered = 1;
8062 lun->pr_key_count = 1;
8063 lun->res_type = type;
8064 if (lun->res_type != SPR_TYPE_WR_EX_AR
8065 && lun->res_type != SPR_TYPE_EX_AC_AR)
8066 lun->pr_res_idx = residx;
8068 /* send msg to other side */
8069 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8070 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8071 persis_io.pr.pr_info.action = CTL_PR_PREEMPT;
8072 persis_io.pr.pr_info.residx = lun->pr_res_idx;
8073 persis_io.pr.pr_info.res_type = type;
8074 memcpy(persis_io.pr.pr_info.sa_res_key,
8075 param->serv_act_res_key,
8076 sizeof(param->serv_act_res_key));
8077 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
8078 &persis_io, sizeof(persis_io), 0)) >
8079 CTL_HA_STATUS_SUCCESS) {
8080 printf("CTL:Persis Out error returned "
8081 "from ctl_ha_msg_send %d\n",
8085 /* not all registrants */
8086 mtx_unlock(&lun->lun_lock);
8087 free(ctsio->kern_data_ptr, M_CTL);
8088 ctl_set_invalid_field(ctsio,
8094 ctl_done((union ctl_io *)ctsio);
8097 } else if (lun->pr_res_idx == CTL_PR_ALL_REGISTRANTS
8098 || !(lun->flags & CTL_LUN_PR_RESERVED)) {
8101 if (res_key == sa_res_key) {
8104 * The spec implies this is not good but doesn't
8105 * say what to do. There are two choices either
8106 * generate a res conflict or check condition
8107 * with illegal field in parameter data. Since
8108 * that is what is done when the sa_res_key is
8109 * zero I'll take that approach since this has
8110 * to do with the sa_res_key.
8112 mtx_unlock(&lun->lun_lock);
8113 free(ctsio->kern_data_ptr, M_CTL);
8114 ctl_set_invalid_field(ctsio,
8120 ctl_done((union ctl_io *)ctsio);
8124 for (i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8125 if (lun->per_res[i].registered
8126 && memcmp(param->serv_act_res_key,
8127 lun->per_res[i].res_key.key,
8128 sizeof(struct scsi_per_res_key)) != 0)
8132 lun->per_res[i].registered = 0;
8133 memset(&lun->per_res[i].res_key, 0,
8134 sizeof(struct scsi_per_res_key));
8135 lun->pr_key_count--;
8137 if (!persis_offset && i < CTL_MAX_INITIATORS)
8138 lun->pending_ua[i] |= CTL_UA_REG_PREEMPT;
8139 else if (persis_offset && i >= persis_offset)
8140 lun->pending_ua[i-persis_offset] |=
8144 mtx_unlock(&lun->lun_lock);
8145 free(ctsio->kern_data_ptr, M_CTL);
8146 ctl_set_reservation_conflict(ctsio);
8147 ctl_done((union ctl_io *)ctsio);
8148 return (CTL_RETVAL_COMPLETE);
8150 /* send msg to other side */
8151 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8152 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8153 persis_io.pr.pr_info.action = CTL_PR_PREEMPT;
8154 persis_io.pr.pr_info.residx = lun->pr_res_idx;
8155 persis_io.pr.pr_info.res_type = type;
8156 memcpy(persis_io.pr.pr_info.sa_res_key,
8157 param->serv_act_res_key,
8158 sizeof(param->serv_act_res_key));
8159 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
8160 &persis_io, sizeof(persis_io), 0)) >
8161 CTL_HA_STATUS_SUCCESS) {
8162 printf("CTL:Persis Out error returned from "
8163 "ctl_ha_msg_send %d\n", isc_retval);
8166 /* Reserved but not all registrants */
8167 /* sa_res_key is res holder */
8168 if (memcmp(param->serv_act_res_key,
8169 lun->per_res[lun->pr_res_idx].res_key.key,
8170 sizeof(struct scsi_per_res_key)) == 0) {
8171 /* validate scope and type */
8172 if ((cdb->scope_type & SPR_SCOPE_MASK) !=
8174 mtx_unlock(&lun->lun_lock);
8175 ctl_set_invalid_field(/*ctsio*/ ctsio,
8181 ctl_done((union ctl_io *)ctsio);
8185 if (type>8 || type==2 || type==4 || type==0) {
8186 mtx_unlock(&lun->lun_lock);
8187 ctl_set_invalid_field(/*ctsio*/ ctsio,
8193 ctl_done((union ctl_io *)ctsio);
8199 * if sa_res_key != res_key remove all
8200 * registrants w/sa_res_key and generate UA
8201 * for these registrants(Registrations
8202 * Preempted) if it wasn't an exclusive
8203 * reservation generate UA(Reservations
8204 * Preempted) for all other registered nexuses
8205 * if the type has changed. Establish the new
8206 * reservation and holder. If res_key and
8207 * sa_res_key are the same do the above
8208 * except don't unregister the res holder.
8212 * Temporarily unregister so it won't get
8213 * removed or UA generated
8215 lun->per_res[residx].registered = 0;
8216 for(i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8217 if (lun->per_res[i].registered == 0)
8220 if (memcmp(param->serv_act_res_key,
8221 lun->per_res[i].res_key.key,
8222 sizeof(struct scsi_per_res_key)) == 0) {
8223 lun->per_res[i].registered = 0;
8224 memset(&lun->per_res[i].res_key,
8226 sizeof(struct scsi_per_res_key));
8227 lun->pr_key_count--;
8230 && i < CTL_MAX_INITIATORS)
8231 lun->pending_ua[i] |=
8233 else if (persis_offset
8234 && i >= persis_offset)
8235 lun->pending_ua[i-persis_offset] |=
8237 } else if (type != lun->res_type
8238 && (lun->res_type == SPR_TYPE_WR_EX_RO
8239 || lun->res_type ==SPR_TYPE_EX_AC_RO)){
8241 && i < CTL_MAX_INITIATORS)
8242 lun->pending_ua[i] |=
8244 else if (persis_offset
8245 && i >= persis_offset)
8251 lun->per_res[residx].registered = 1;
8252 lun->res_type = type;
8253 if (lun->res_type != SPR_TYPE_WR_EX_AR
8254 && lun->res_type != SPR_TYPE_EX_AC_AR)
8255 lun->pr_res_idx = residx;
8257 lun->pr_res_idx = CTL_PR_ALL_REGISTRANTS;
8259 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8260 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8261 persis_io.pr.pr_info.action = CTL_PR_PREEMPT;
8262 persis_io.pr.pr_info.residx = lun->pr_res_idx;
8263 persis_io.pr.pr_info.res_type = type;
8264 memcpy(persis_io.pr.pr_info.sa_res_key,
8265 param->serv_act_res_key,
8266 sizeof(param->serv_act_res_key));
8267 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
8268 &persis_io, sizeof(persis_io), 0)) >
8269 CTL_HA_STATUS_SUCCESS) {
8270 printf("CTL:Persis Out error returned "
8271 "from ctl_ha_msg_send %d\n",
8276 * sa_res_key is not the res holder just
8277 * remove registrants
8281 for (i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8282 if (memcmp(param->serv_act_res_key,
8283 lun->per_res[i].res_key.key,
8284 sizeof(struct scsi_per_res_key)) != 0)
8288 lun->per_res[i].registered = 0;
8289 memset(&lun->per_res[i].res_key, 0,
8290 sizeof(struct scsi_per_res_key));
8291 lun->pr_key_count--;
8294 && i < CTL_MAX_INITIATORS)
8295 lun->pending_ua[i] |=
8297 else if (persis_offset
8298 && i >= persis_offset)
8299 lun->pending_ua[i-persis_offset] |=
8304 mtx_unlock(&lun->lun_lock);
8305 free(ctsio->kern_data_ptr, M_CTL);
8306 ctl_set_reservation_conflict(ctsio);
8307 ctl_done((union ctl_io *)ctsio);
8310 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8311 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8312 persis_io.pr.pr_info.action = CTL_PR_PREEMPT;
8313 persis_io.pr.pr_info.residx = lun->pr_res_idx;
8314 persis_io.pr.pr_info.res_type = type;
8315 memcpy(persis_io.pr.pr_info.sa_res_key,
8316 param->serv_act_res_key,
8317 sizeof(param->serv_act_res_key));
8318 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
8319 &persis_io, sizeof(persis_io), 0)) >
8320 CTL_HA_STATUS_SUCCESS) {
8321 printf("CTL:Persis Out error returned "
8322 "from ctl_ha_msg_send %d\n",
8328 lun->PRGeneration++;
8329 mtx_unlock(&lun->lun_lock);
8335 ctl_pro_preempt_other(struct ctl_lun *lun, union ctl_ha_msg *msg)
8339 if (lun->pr_res_idx == CTL_PR_ALL_REGISTRANTS
8340 || lun->pr_res_idx == CTL_PR_NO_RESERVATION
8341 || memcmp(&lun->per_res[lun->pr_res_idx].res_key,
8342 msg->pr.pr_info.sa_res_key,
8343 sizeof(struct scsi_per_res_key)) != 0) {
8344 uint64_t sa_res_key;
8345 sa_res_key = scsi_8btou64(msg->pr.pr_info.sa_res_key);
8347 if (sa_res_key == 0) {
8348 /* temporarily unregister this nexus */
8349 lun->per_res[msg->pr.pr_info.residx].registered = 0;
8352 * Unregister everybody else and build UA for
8355 for(i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8356 if (lun->per_res[i].registered == 0)
8360 && i < CTL_MAX_INITIATORS)
8361 lun->pending_ua[i] |=
8363 else if (persis_offset && i >= persis_offset)
8364 lun->pending_ua[i - persis_offset] |=
8366 lun->per_res[i].registered = 0;
8367 memset(&lun->per_res[i].res_key, 0,
8368 sizeof(struct scsi_per_res_key));
8371 lun->per_res[msg->pr.pr_info.residx].registered = 1;
8372 lun->pr_key_count = 1;
8373 lun->res_type = msg->pr.pr_info.res_type;
8374 if (lun->res_type != SPR_TYPE_WR_EX_AR
8375 && lun->res_type != SPR_TYPE_EX_AC_AR)
8376 lun->pr_res_idx = msg->pr.pr_info.residx;
8378 for (i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8379 if (memcmp(msg->pr.pr_info.sa_res_key,
8380 lun->per_res[i].res_key.key,
8381 sizeof(struct scsi_per_res_key)) != 0)
8384 lun->per_res[i].registered = 0;
8385 memset(&lun->per_res[i].res_key, 0,
8386 sizeof(struct scsi_per_res_key));
8387 lun->pr_key_count--;
8390 && i < persis_offset)
8391 lun->pending_ua[i] |=
8393 else if (persis_offset
8394 && i >= persis_offset)
8395 lun->pending_ua[i - persis_offset] |=
8401 * Temporarily unregister so it won't get removed
8404 lun->per_res[msg->pr.pr_info.residx].registered = 0;
8405 for (i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8406 if (lun->per_res[i].registered == 0)
8409 if (memcmp(msg->pr.pr_info.sa_res_key,
8410 lun->per_res[i].res_key.key,
8411 sizeof(struct scsi_per_res_key)) == 0) {
8412 lun->per_res[i].registered = 0;
8413 memset(&lun->per_res[i].res_key, 0,
8414 sizeof(struct scsi_per_res_key));
8415 lun->pr_key_count--;
8417 && i < CTL_MAX_INITIATORS)
8418 lun->pending_ua[i] |=
8420 else if (persis_offset
8421 && i >= persis_offset)
8422 lun->pending_ua[i - persis_offset] |=
8424 } else if (msg->pr.pr_info.res_type != lun->res_type
8425 && (lun->res_type == SPR_TYPE_WR_EX_RO
8426 || lun->res_type == SPR_TYPE_EX_AC_RO)) {
8428 && i < persis_offset)
8429 lun->pending_ua[i] |=
8431 else if (persis_offset
8432 && i >= persis_offset)
8433 lun->pending_ua[i - persis_offset] |=
8437 lun->per_res[msg->pr.pr_info.residx].registered = 1;
8438 lun->res_type = msg->pr.pr_info.res_type;
8439 if (lun->res_type != SPR_TYPE_WR_EX_AR
8440 && lun->res_type != SPR_TYPE_EX_AC_AR)
8441 lun->pr_res_idx = msg->pr.pr_info.residx;
8443 lun->pr_res_idx = CTL_PR_ALL_REGISTRANTS;
8445 lun->PRGeneration++;
8451 ctl_persistent_reserve_out(struct ctl_scsiio *ctsio)
8455 u_int32_t param_len;
8456 struct scsi_per_res_out *cdb;
8457 struct ctl_lun *lun;
8458 struct scsi_per_res_out_parms* param;
8459 struct ctl_softc *softc;
8461 uint64_t res_key, sa_res_key;
8463 union ctl_ha_msg persis_io;
8466 CTL_DEBUG_PRINT(("ctl_persistent_reserve_out\n"));
8468 retval = CTL_RETVAL_COMPLETE;
8470 softc = control_softc;
8472 cdb = (struct scsi_per_res_out *)ctsio->cdb;
8473 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
8476 * We only support whole-LUN scope. The scope & type are ignored for
8477 * register, register and ignore existing key and clear.
8478 * We sometimes ignore scope and type on preempts too!!
8479 * Verify reservation type here as well.
8481 type = cdb->scope_type & SPR_TYPE_MASK;
8482 if ((cdb->action == SPRO_RESERVE)
8483 || (cdb->action == SPRO_RELEASE)) {
8484 if ((cdb->scope_type & SPR_SCOPE_MASK) != SPR_LU_SCOPE) {
8485 ctl_set_invalid_field(/*ctsio*/ ctsio,
8491 ctl_done((union ctl_io *)ctsio);
8492 return (CTL_RETVAL_COMPLETE);
8495 if (type>8 || type==2 || type==4 || type==0) {
8496 ctl_set_invalid_field(/*ctsio*/ ctsio,
8502 ctl_done((union ctl_io *)ctsio);
8503 return (CTL_RETVAL_COMPLETE);
8507 param_len = scsi_4btoul(cdb->length);
8509 if ((ctsio->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0) {
8510 ctsio->kern_data_ptr = malloc(param_len, M_CTL, M_WAITOK);
8511 ctsio->kern_data_len = param_len;
8512 ctsio->kern_total_len = param_len;
8513 ctsio->kern_data_resid = 0;
8514 ctsio->kern_rel_offset = 0;
8515 ctsio->kern_sg_entries = 0;
8516 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
8517 ctsio->be_move_done = ctl_config_move_done;
8518 ctl_datamove((union ctl_io *)ctsio);
8520 return (CTL_RETVAL_COMPLETE);
8523 param = (struct scsi_per_res_out_parms *)ctsio->kern_data_ptr;
8525 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
8526 res_key = scsi_8btou64(param->res_key.key);
8527 sa_res_key = scsi_8btou64(param->serv_act_res_key);
8530 * Validate the reservation key here except for SPRO_REG_IGNO
8531 * This must be done for all other service actions
8533 if ((cdb->action & SPRO_ACTION_MASK) != SPRO_REG_IGNO) {
8534 mtx_lock(&lun->lun_lock);
8535 if (lun->per_res[residx].registered) {
8536 if (memcmp(param->res_key.key,
8537 lun->per_res[residx].res_key.key,
8538 ctl_min(sizeof(param->res_key),
8539 sizeof(lun->per_res[residx].res_key))) != 0) {
8541 * The current key passed in doesn't match
8542 * the one the initiator previously
8545 mtx_unlock(&lun->lun_lock);
8546 free(ctsio->kern_data_ptr, M_CTL);
8547 ctl_set_reservation_conflict(ctsio);
8548 ctl_done((union ctl_io *)ctsio);
8549 return (CTL_RETVAL_COMPLETE);
8551 } else if ((cdb->action & SPRO_ACTION_MASK) != SPRO_REGISTER) {
8553 * We are not registered
8555 mtx_unlock(&lun->lun_lock);
8556 free(ctsio->kern_data_ptr, M_CTL);
8557 ctl_set_reservation_conflict(ctsio);
8558 ctl_done((union ctl_io *)ctsio);
8559 return (CTL_RETVAL_COMPLETE);
8560 } else if (res_key != 0) {
8562 * We are not registered and trying to register but
8563 * the register key isn't zero.
8565 mtx_unlock(&lun->lun_lock);
8566 free(ctsio->kern_data_ptr, M_CTL);
8567 ctl_set_reservation_conflict(ctsio);
8568 ctl_done((union ctl_io *)ctsio);
8569 return (CTL_RETVAL_COMPLETE);
8571 mtx_unlock(&lun->lun_lock);
8574 switch (cdb->action & SPRO_ACTION_MASK) {
8576 case SPRO_REG_IGNO: {
8579 printf("Registration received\n");
8583 * We don't support any of these options, as we report in
8584 * the read capabilities request (see
8585 * ctl_persistent_reserve_in(), above).
8587 if ((param->flags & SPR_SPEC_I_PT)
8588 || (param->flags & SPR_ALL_TG_PT)
8589 || (param->flags & SPR_APTPL)) {
8592 if (param->flags & SPR_APTPL)
8594 else if (param->flags & SPR_ALL_TG_PT)
8596 else /* SPR_SPEC_I_PT */
8599 free(ctsio->kern_data_ptr, M_CTL);
8600 ctl_set_invalid_field(ctsio,
8606 ctl_done((union ctl_io *)ctsio);
8607 return (CTL_RETVAL_COMPLETE);
8610 mtx_lock(&lun->lun_lock);
8613 * The initiator wants to clear the
8616 if (sa_res_key == 0) {
8618 && (cdb->action & SPRO_ACTION_MASK) == SPRO_REGISTER)
8619 || ((cdb->action & SPRO_ACTION_MASK) == SPRO_REG_IGNO
8620 && !lun->per_res[residx].registered)) {
8621 mtx_unlock(&lun->lun_lock);
8625 lun->per_res[residx].registered = 0;
8626 memset(&lun->per_res[residx].res_key,
8627 0, sizeof(lun->per_res[residx].res_key));
8628 lun->pr_key_count--;
8630 if (residx == lun->pr_res_idx) {
8631 lun->flags &= ~CTL_LUN_PR_RESERVED;
8632 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8634 if ((lun->res_type == SPR_TYPE_WR_EX_RO
8635 || lun->res_type == SPR_TYPE_EX_AC_RO)
8636 && lun->pr_key_count) {
8638 * If the reservation is a registrants
8639 * only type we need to generate a UA
8640 * for other registered inits. The
8641 * sense code should be RESERVATIONS
8645 for (i = 0; i < CTL_MAX_INITIATORS;i++){
8647 i+persis_offset].registered
8650 lun->pending_ua[i] |=
8655 } else if (lun->pr_res_idx == CTL_PR_ALL_REGISTRANTS) {
8656 if (lun->pr_key_count==0) {
8657 lun->flags &= ~CTL_LUN_PR_RESERVED;
8659 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8662 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8663 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8664 persis_io.pr.pr_info.action = CTL_PR_UNREG_KEY;
8665 persis_io.pr.pr_info.residx = residx;
8666 if ((isc_retval = ctl_ha_msg_send(CTL_HA_CHAN_CTL,
8667 &persis_io, sizeof(persis_io), 0 )) >
8668 CTL_HA_STATUS_SUCCESS) {
8669 printf("CTL:Persis Out error returned from "
8670 "ctl_ha_msg_send %d\n", isc_retval);
8672 } else /* sa_res_key != 0 */ {
8675 * If we aren't registered currently then increment
8676 * the key count and set the registered flag.
8678 if (!lun->per_res[residx].registered) {
8679 lun->pr_key_count++;
8680 lun->per_res[residx].registered = 1;
8683 memcpy(&lun->per_res[residx].res_key,
8684 param->serv_act_res_key,
8685 ctl_min(sizeof(param->serv_act_res_key),
8686 sizeof(lun->per_res[residx].res_key)));
8688 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8689 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8690 persis_io.pr.pr_info.action = CTL_PR_REG_KEY;
8691 persis_io.pr.pr_info.residx = residx;
8692 memcpy(persis_io.pr.pr_info.sa_res_key,
8693 param->serv_act_res_key,
8694 sizeof(param->serv_act_res_key));
8695 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
8696 &persis_io, sizeof(persis_io), 0)) >
8697 CTL_HA_STATUS_SUCCESS) {
8698 printf("CTL:Persis Out error returned from "
8699 "ctl_ha_msg_send %d\n", isc_retval);
8702 lun->PRGeneration++;
8703 mtx_unlock(&lun->lun_lock);
8709 printf("Reserve executed type %d\n", type);
8711 mtx_lock(&lun->lun_lock);
8712 if (lun->flags & CTL_LUN_PR_RESERVED) {
8714 * if this isn't the reservation holder and it's
8715 * not a "all registrants" type or if the type is
8716 * different then we have a conflict
8718 if ((lun->pr_res_idx != residx
8719 && lun->pr_res_idx != CTL_PR_ALL_REGISTRANTS)
8720 || lun->res_type != type) {
8721 mtx_unlock(&lun->lun_lock);
8722 free(ctsio->kern_data_ptr, M_CTL);
8723 ctl_set_reservation_conflict(ctsio);
8724 ctl_done((union ctl_io *)ctsio);
8725 return (CTL_RETVAL_COMPLETE);
8727 mtx_unlock(&lun->lun_lock);
8728 } else /* create a reservation */ {
8730 * If it's not an "all registrants" type record
8731 * reservation holder
8733 if (type != SPR_TYPE_WR_EX_AR
8734 && type != SPR_TYPE_EX_AC_AR)
8735 lun->pr_res_idx = residx; /* Res holder */
8737 lun->pr_res_idx = CTL_PR_ALL_REGISTRANTS;
8739 lun->flags |= CTL_LUN_PR_RESERVED;
8740 lun->res_type = type;
8742 mtx_unlock(&lun->lun_lock);
8744 /* send msg to other side */
8745 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8746 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8747 persis_io.pr.pr_info.action = CTL_PR_RESERVE;
8748 persis_io.pr.pr_info.residx = lun->pr_res_idx;
8749 persis_io.pr.pr_info.res_type = type;
8750 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
8751 &persis_io, sizeof(persis_io), 0)) >
8752 CTL_HA_STATUS_SUCCESS) {
8753 printf("CTL:Persis Out error returned from "
8754 "ctl_ha_msg_send %d\n", isc_retval);
8760 mtx_lock(&lun->lun_lock);
8761 if ((lun->flags & CTL_LUN_PR_RESERVED) == 0) {
8762 /* No reservation exists return good status */
8763 mtx_unlock(&lun->lun_lock);
8767 * Is this nexus a reservation holder?
8769 if (lun->pr_res_idx != residx
8770 && lun->pr_res_idx != CTL_PR_ALL_REGISTRANTS) {
8772 * not a res holder return good status but
8775 mtx_unlock(&lun->lun_lock);
8779 if (lun->res_type != type) {
8780 mtx_unlock(&lun->lun_lock);
8781 free(ctsio->kern_data_ptr, M_CTL);
8782 ctl_set_illegal_pr_release(ctsio);
8783 ctl_done((union ctl_io *)ctsio);
8784 return (CTL_RETVAL_COMPLETE);
8787 /* okay to release */
8788 lun->flags &= ~CTL_LUN_PR_RESERVED;
8789 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8793 * if this isn't an exclusive access
8794 * res generate UA for all other
8797 if (type != SPR_TYPE_EX_AC
8798 && type != SPR_TYPE_WR_EX) {
8800 * temporarily unregister so we don't generate UA
8802 lun->per_res[residx].registered = 0;
8804 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
8805 if (lun->per_res[i+persis_offset].registered
8808 lun->pending_ua[i] |=
8812 lun->per_res[residx].registered = 1;
8814 mtx_unlock(&lun->lun_lock);
8815 /* Send msg to other side */
8816 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8817 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8818 persis_io.pr.pr_info.action = CTL_PR_RELEASE;
8819 if ((isc_retval=ctl_ha_msg_send( CTL_HA_CHAN_CTL, &persis_io,
8820 sizeof(persis_io), 0)) > CTL_HA_STATUS_SUCCESS) {
8821 printf("CTL:Persis Out error returned from "
8822 "ctl_ha_msg_send %d\n", isc_retval);
8827 /* send msg to other side */
8829 mtx_lock(&lun->lun_lock);
8830 lun->flags &= ~CTL_LUN_PR_RESERVED;
8832 lun->pr_key_count = 0;
8833 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8836 memset(&lun->per_res[residx].res_key,
8837 0, sizeof(lun->per_res[residx].res_key));
8838 lun->per_res[residx].registered = 0;
8840 for (i=0; i < 2*CTL_MAX_INITIATORS; i++)
8841 if (lun->per_res[i].registered) {
8842 if (!persis_offset && i < CTL_MAX_INITIATORS)
8843 lun->pending_ua[i] |=
8845 else if (persis_offset && i >= persis_offset)
8846 lun->pending_ua[i-persis_offset] |=
8849 memset(&lun->per_res[i].res_key,
8850 0, sizeof(struct scsi_per_res_key));
8851 lun->per_res[i].registered = 0;
8853 lun->PRGeneration++;
8854 mtx_unlock(&lun->lun_lock);
8855 persis_io.hdr.nexus = ctsio->io_hdr.nexus;
8856 persis_io.hdr.msg_type = CTL_MSG_PERS_ACTION;
8857 persis_io.pr.pr_info.action = CTL_PR_CLEAR;
8858 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL, &persis_io,
8859 sizeof(persis_io), 0)) > CTL_HA_STATUS_SUCCESS) {
8860 printf("CTL:Persis Out error returned from "
8861 "ctl_ha_msg_send %d\n", isc_retval);
8865 case SPRO_PREEMPT: {
8868 nretval = ctl_pro_preempt(softc, lun, res_key, sa_res_key, type,
8869 residx, ctsio, cdb, param);
8871 return (CTL_RETVAL_COMPLETE);
8875 panic("Invalid PR type %x", cdb->action);
8879 free(ctsio->kern_data_ptr, M_CTL);
8880 ctl_set_success(ctsio);
8881 ctl_done((union ctl_io *)ctsio);
8887 * This routine is for handling a message from the other SC pertaining to
8888 * persistent reserve out. All the error checking will have been done
8889 * so only perorming the action need be done here to keep the two
8893 ctl_hndl_per_res_out_on_other_sc(union ctl_ha_msg *msg)
8895 struct ctl_lun *lun;
8896 struct ctl_softc *softc;
8900 softc = control_softc;
8902 targ_lun = msg->hdr.nexus.targ_mapped_lun;
8903 lun = softc->ctl_luns[targ_lun];
8904 mtx_lock(&lun->lun_lock);
8905 switch(msg->pr.pr_info.action) {
8906 case CTL_PR_REG_KEY:
8907 if (!lun->per_res[msg->pr.pr_info.residx].registered) {
8908 lun->per_res[msg->pr.pr_info.residx].registered = 1;
8909 lun->pr_key_count++;
8911 lun->PRGeneration++;
8912 memcpy(&lun->per_res[msg->pr.pr_info.residx].res_key,
8913 msg->pr.pr_info.sa_res_key,
8914 sizeof(struct scsi_per_res_key));
8917 case CTL_PR_UNREG_KEY:
8918 lun->per_res[msg->pr.pr_info.residx].registered = 0;
8919 memset(&lun->per_res[msg->pr.pr_info.residx].res_key,
8920 0, sizeof(struct scsi_per_res_key));
8921 lun->pr_key_count--;
8923 /* XXX Need to see if the reservation has been released */
8924 /* if so do we need to generate UA? */
8925 if (msg->pr.pr_info.residx == lun->pr_res_idx) {
8926 lun->flags &= ~CTL_LUN_PR_RESERVED;
8927 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8929 if ((lun->res_type == SPR_TYPE_WR_EX_RO
8930 || lun->res_type == SPR_TYPE_EX_AC_RO)
8931 && lun->pr_key_count) {
8933 * If the reservation is a registrants
8934 * only type we need to generate a UA
8935 * for other registered inits. The
8936 * sense code should be RESERVATIONS
8940 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
8942 persis_offset].registered == 0)
8945 lun->pending_ua[i] |=
8950 } else if (lun->pr_res_idx == CTL_PR_ALL_REGISTRANTS) {
8951 if (lun->pr_key_count==0) {
8952 lun->flags &= ~CTL_LUN_PR_RESERVED;
8954 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8957 lun->PRGeneration++;
8960 case CTL_PR_RESERVE:
8961 lun->flags |= CTL_LUN_PR_RESERVED;
8962 lun->res_type = msg->pr.pr_info.res_type;
8963 lun->pr_res_idx = msg->pr.pr_info.residx;
8967 case CTL_PR_RELEASE:
8969 * if this isn't an exclusive access res generate UA for all
8970 * other registrants.
8972 if (lun->res_type != SPR_TYPE_EX_AC
8973 && lun->res_type != SPR_TYPE_WR_EX) {
8974 for (i = 0; i < CTL_MAX_INITIATORS; i++)
8975 if (lun->per_res[i+persis_offset].registered)
8976 lun->pending_ua[i] |=
8980 lun->flags &= ~CTL_LUN_PR_RESERVED;
8981 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8985 case CTL_PR_PREEMPT:
8986 ctl_pro_preempt_other(lun, msg);
8989 lun->flags &= ~CTL_LUN_PR_RESERVED;
8991 lun->pr_key_count = 0;
8992 lun->pr_res_idx = CTL_PR_NO_RESERVATION;
8994 for (i=0; i < 2*CTL_MAX_INITIATORS; i++) {
8995 if (lun->per_res[i].registered == 0)
8998 && i < CTL_MAX_INITIATORS)
8999 lun->pending_ua[i] |= CTL_UA_RES_PREEMPT;
9000 else if (persis_offset
9001 && i >= persis_offset)
9002 lun->pending_ua[i-persis_offset] |=
9004 memset(&lun->per_res[i].res_key, 0,
9005 sizeof(struct scsi_per_res_key));
9006 lun->per_res[i].registered = 0;
9008 lun->PRGeneration++;
9012 mtx_unlock(&lun->lun_lock);
9016 ctl_read_write(struct ctl_scsiio *ctsio)
9018 struct ctl_lun *lun;
9019 struct ctl_lba_len_flags *lbalen;
9021 uint32_t num_blocks;
9025 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9027 CTL_DEBUG_PRINT(("ctl_read_write: command: %#x\n", ctsio->cdb[0]));
9030 retval = CTL_RETVAL_COMPLETE;
9032 isread = ctsio->cdb[0] == READ_6 || ctsio->cdb[0] == READ_10
9033 || ctsio->cdb[0] == READ_12 || ctsio->cdb[0] == READ_16;
9034 if (lun->flags & CTL_LUN_PR_RESERVED && isread) {
9038 * XXX KDM need a lock here.
9040 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
9041 if ((lun->res_type == SPR_TYPE_EX_AC
9042 && residx != lun->pr_res_idx)
9043 || ((lun->res_type == SPR_TYPE_EX_AC_RO
9044 || lun->res_type == SPR_TYPE_EX_AC_AR)
9045 && !lun->per_res[residx].registered)) {
9046 ctl_set_reservation_conflict(ctsio);
9047 ctl_done((union ctl_io *)ctsio);
9048 return (CTL_RETVAL_COMPLETE);
9052 switch (ctsio->cdb[0]) {
9055 struct scsi_rw_6 *cdb;
9057 cdb = (struct scsi_rw_6 *)ctsio->cdb;
9059 lba = scsi_3btoul(cdb->addr);
9060 /* only 5 bits are valid in the most significant address byte */
9062 num_blocks = cdb->length;
9064 * This is correct according to SBC-2.
9066 if (num_blocks == 0)
9072 struct scsi_rw_10 *cdb;
9074 cdb = (struct scsi_rw_10 *)ctsio->cdb;
9075 if (cdb->byte2 & SRW10_FUA)
9076 flags |= CTL_LLF_FUA;
9077 if (cdb->byte2 & SRW10_DPO)
9078 flags |= CTL_LLF_DPO;
9079 lba = scsi_4btoul(cdb->addr);
9080 num_blocks = scsi_2btoul(cdb->length);
9083 case WRITE_VERIFY_10: {
9084 struct scsi_write_verify_10 *cdb;
9086 cdb = (struct scsi_write_verify_10 *)ctsio->cdb;
9087 flags |= CTL_LLF_FUA;
9088 if (cdb->byte2 & SWV_DPO)
9089 flags |= CTL_LLF_DPO;
9090 lba = scsi_4btoul(cdb->addr);
9091 num_blocks = scsi_2btoul(cdb->length);
9096 struct scsi_rw_12 *cdb;
9098 cdb = (struct scsi_rw_12 *)ctsio->cdb;
9099 if (cdb->byte2 & SRW12_FUA)
9100 flags |= CTL_LLF_FUA;
9101 if (cdb->byte2 & SRW12_DPO)
9102 flags |= CTL_LLF_DPO;
9103 lba = scsi_4btoul(cdb->addr);
9104 num_blocks = scsi_4btoul(cdb->length);
9107 case WRITE_VERIFY_12: {
9108 struct scsi_write_verify_12 *cdb;
9110 cdb = (struct scsi_write_verify_12 *)ctsio->cdb;
9111 flags |= CTL_LLF_FUA;
9112 if (cdb->byte2 & SWV_DPO)
9113 flags |= CTL_LLF_DPO;
9114 lba = scsi_4btoul(cdb->addr);
9115 num_blocks = scsi_4btoul(cdb->length);
9120 struct scsi_rw_16 *cdb;
9122 cdb = (struct scsi_rw_16 *)ctsio->cdb;
9123 if (cdb->byte2 & SRW12_FUA)
9124 flags |= CTL_LLF_FUA;
9125 if (cdb->byte2 & SRW12_DPO)
9126 flags |= CTL_LLF_DPO;
9127 lba = scsi_8btou64(cdb->addr);
9128 num_blocks = scsi_4btoul(cdb->length);
9131 case WRITE_ATOMIC_16: {
9132 struct scsi_rw_16 *cdb;
9134 if (lun->be_lun->atomicblock == 0) {
9135 ctl_set_invalid_opcode(ctsio);
9136 ctl_done((union ctl_io *)ctsio);
9137 return (CTL_RETVAL_COMPLETE);
9140 cdb = (struct scsi_rw_16 *)ctsio->cdb;
9141 if (cdb->byte2 & SRW12_FUA)
9142 flags |= CTL_LLF_FUA;
9143 if (cdb->byte2 & SRW12_DPO)
9144 flags |= CTL_LLF_DPO;
9145 lba = scsi_8btou64(cdb->addr);
9146 num_blocks = scsi_4btoul(cdb->length);
9147 if (num_blocks > lun->be_lun->atomicblock) {
9148 ctl_set_invalid_field(ctsio, /*sks_valid*/ 1,
9149 /*command*/ 1, /*field*/ 12, /*bit_valid*/ 0,
9151 ctl_done((union ctl_io *)ctsio);
9152 return (CTL_RETVAL_COMPLETE);
9156 case WRITE_VERIFY_16: {
9157 struct scsi_write_verify_16 *cdb;
9159 cdb = (struct scsi_write_verify_16 *)ctsio->cdb;
9160 flags |= CTL_LLF_FUA;
9161 if (cdb->byte2 & SWV_DPO)
9162 flags |= CTL_LLF_DPO;
9163 lba = scsi_8btou64(cdb->addr);
9164 num_blocks = scsi_4btoul(cdb->length);
9169 * We got a command we don't support. This shouldn't
9170 * happen, commands should be filtered out above us.
9172 ctl_set_invalid_opcode(ctsio);
9173 ctl_done((union ctl_io *)ctsio);
9175 return (CTL_RETVAL_COMPLETE);
9176 break; /* NOTREACHED */
9180 * The first check is to make sure we're in bounds, the second
9181 * check is to catch wrap-around problems. If the lba + num blocks
9182 * is less than the lba, then we've wrapped around and the block
9183 * range is invalid anyway.
9185 if (((lba + num_blocks) > (lun->be_lun->maxlba + 1))
9186 || ((lba + num_blocks) < lba)) {
9187 ctl_set_lba_out_of_range(ctsio);
9188 ctl_done((union ctl_io *)ctsio);
9189 return (CTL_RETVAL_COMPLETE);
9193 * According to SBC-3, a transfer length of 0 is not an error.
9194 * Note that this cannot happen with WRITE(6) or READ(6), since 0
9195 * translates to 256 blocks for those commands.
9197 if (num_blocks == 0) {
9198 ctl_set_success(ctsio);
9199 ctl_done((union ctl_io *)ctsio);
9200 return (CTL_RETVAL_COMPLETE);
9203 /* Set FUA and/or DPO if caches are disabled. */
9205 if ((lun->mode_pages.caching_page[CTL_PAGE_CURRENT].flags1 &
9207 flags |= CTL_LLF_FUA | CTL_LLF_DPO;
9209 if ((lun->mode_pages.caching_page[CTL_PAGE_CURRENT].flags1 &
9211 flags |= CTL_LLF_FUA;
9214 lbalen = (struct ctl_lba_len_flags *)
9215 &ctsio->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
9217 lbalen->len = num_blocks;
9218 lbalen->flags = (isread ? CTL_LLF_READ : CTL_LLF_WRITE) | flags;
9220 ctsio->kern_total_len = num_blocks * lun->be_lun->blocksize;
9221 ctsio->kern_rel_offset = 0;
9223 CTL_DEBUG_PRINT(("ctl_read_write: calling data_submit()\n"));
9225 retval = lun->backend->data_submit((union ctl_io *)ctsio);
9231 ctl_cnw_cont(union ctl_io *io)
9233 struct ctl_scsiio *ctsio;
9234 struct ctl_lun *lun;
9235 struct ctl_lba_len_flags *lbalen;
9238 ctsio = &io->scsiio;
9239 ctsio->io_hdr.status = CTL_STATUS_NONE;
9240 ctsio->io_hdr.flags &= ~CTL_FLAG_IO_CONT;
9241 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9242 lbalen = (struct ctl_lba_len_flags *)
9243 &ctsio->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
9244 lbalen->flags &= ~CTL_LLF_COMPARE;
9245 lbalen->flags |= CTL_LLF_WRITE;
9247 CTL_DEBUG_PRINT(("ctl_cnw_cont: calling data_submit()\n"));
9248 retval = lun->backend->data_submit((union ctl_io *)ctsio);
9253 ctl_cnw(struct ctl_scsiio *ctsio)
9255 struct ctl_lun *lun;
9256 struct ctl_lba_len_flags *lbalen;
9258 uint32_t num_blocks;
9261 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9263 CTL_DEBUG_PRINT(("ctl_cnw: command: %#x\n", ctsio->cdb[0]));
9266 retval = CTL_RETVAL_COMPLETE;
9268 switch (ctsio->cdb[0]) {
9269 case COMPARE_AND_WRITE: {
9270 struct scsi_compare_and_write *cdb;
9272 cdb = (struct scsi_compare_and_write *)ctsio->cdb;
9273 if (cdb->byte2 & SRW10_FUA)
9274 flags |= CTL_LLF_FUA;
9275 if (cdb->byte2 & SRW10_DPO)
9276 flags |= CTL_LLF_DPO;
9277 lba = scsi_8btou64(cdb->addr);
9278 num_blocks = cdb->length;
9283 * We got a command we don't support. This shouldn't
9284 * happen, commands should be filtered out above us.
9286 ctl_set_invalid_opcode(ctsio);
9287 ctl_done((union ctl_io *)ctsio);
9289 return (CTL_RETVAL_COMPLETE);
9290 break; /* NOTREACHED */
9294 * The first check is to make sure we're in bounds, the second
9295 * check is to catch wrap-around problems. If the lba + num blocks
9296 * is less than the lba, then we've wrapped around and the block
9297 * range is invalid anyway.
9299 if (((lba + num_blocks) > (lun->be_lun->maxlba + 1))
9300 || ((lba + num_blocks) < lba)) {
9301 ctl_set_lba_out_of_range(ctsio);
9302 ctl_done((union ctl_io *)ctsio);
9303 return (CTL_RETVAL_COMPLETE);
9307 * According to SBC-3, a transfer length of 0 is not an error.
9309 if (num_blocks == 0) {
9310 ctl_set_success(ctsio);
9311 ctl_done((union ctl_io *)ctsio);
9312 return (CTL_RETVAL_COMPLETE);
9315 /* Set FUA if write cache is disabled. */
9316 if ((lun->mode_pages.caching_page[CTL_PAGE_CURRENT].flags1 &
9318 flags |= CTL_LLF_FUA;
9320 ctsio->kern_total_len = 2 * num_blocks * lun->be_lun->blocksize;
9321 ctsio->kern_rel_offset = 0;
9324 * Set the IO_CONT flag, so that if this I/O gets passed to
9325 * ctl_data_submit_done(), it'll get passed back to
9326 * ctl_ctl_cnw_cont() for further processing.
9328 ctsio->io_hdr.flags |= CTL_FLAG_IO_CONT;
9329 ctsio->io_cont = ctl_cnw_cont;
9331 lbalen = (struct ctl_lba_len_flags *)
9332 &ctsio->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
9334 lbalen->len = num_blocks;
9335 lbalen->flags = CTL_LLF_COMPARE | flags;
9337 CTL_DEBUG_PRINT(("ctl_cnw: calling data_submit()\n"));
9338 retval = lun->backend->data_submit((union ctl_io *)ctsio);
9343 ctl_verify(struct ctl_scsiio *ctsio)
9345 struct ctl_lun *lun;
9346 struct ctl_lba_len_flags *lbalen;
9348 uint32_t num_blocks;
9352 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9354 CTL_DEBUG_PRINT(("ctl_verify: command: %#x\n", ctsio->cdb[0]));
9357 flags = CTL_LLF_FUA;
9358 retval = CTL_RETVAL_COMPLETE;
9360 switch (ctsio->cdb[0]) {
9362 struct scsi_verify_10 *cdb;
9364 cdb = (struct scsi_verify_10 *)ctsio->cdb;
9365 if (cdb->byte2 & SVFY_BYTCHK)
9367 if (cdb->byte2 & SVFY_DPO)
9368 flags |= CTL_LLF_DPO;
9369 lba = scsi_4btoul(cdb->addr);
9370 num_blocks = scsi_2btoul(cdb->length);
9374 struct scsi_verify_12 *cdb;
9376 cdb = (struct scsi_verify_12 *)ctsio->cdb;
9377 if (cdb->byte2 & SVFY_BYTCHK)
9379 if (cdb->byte2 & SVFY_DPO)
9380 flags |= CTL_LLF_DPO;
9381 lba = scsi_4btoul(cdb->addr);
9382 num_blocks = scsi_4btoul(cdb->length);
9386 struct scsi_rw_16 *cdb;
9388 cdb = (struct scsi_rw_16 *)ctsio->cdb;
9389 if (cdb->byte2 & SVFY_BYTCHK)
9391 if (cdb->byte2 & SVFY_DPO)
9392 flags |= CTL_LLF_DPO;
9393 lba = scsi_8btou64(cdb->addr);
9394 num_blocks = scsi_4btoul(cdb->length);
9399 * We got a command we don't support. This shouldn't
9400 * happen, commands should be filtered out above us.
9402 ctl_set_invalid_opcode(ctsio);
9403 ctl_done((union ctl_io *)ctsio);
9404 return (CTL_RETVAL_COMPLETE);
9408 * The first check is to make sure we're in bounds, the second
9409 * check is to catch wrap-around problems. If the lba + num blocks
9410 * is less than the lba, then we've wrapped around and the block
9411 * range is invalid anyway.
9413 if (((lba + num_blocks) > (lun->be_lun->maxlba + 1))
9414 || ((lba + num_blocks) < lba)) {
9415 ctl_set_lba_out_of_range(ctsio);
9416 ctl_done((union ctl_io *)ctsio);
9417 return (CTL_RETVAL_COMPLETE);
9421 * According to SBC-3, a transfer length of 0 is not an error.
9423 if (num_blocks == 0) {
9424 ctl_set_success(ctsio);
9425 ctl_done((union ctl_io *)ctsio);
9426 return (CTL_RETVAL_COMPLETE);
9429 lbalen = (struct ctl_lba_len_flags *)
9430 &ctsio->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
9432 lbalen->len = num_blocks;
9434 lbalen->flags = CTL_LLF_COMPARE | flags;
9435 ctsio->kern_total_len = num_blocks * lun->be_lun->blocksize;
9437 lbalen->flags = CTL_LLF_VERIFY | flags;
9438 ctsio->kern_total_len = 0;
9440 ctsio->kern_rel_offset = 0;
9442 CTL_DEBUG_PRINT(("ctl_verify: calling data_submit()\n"));
9443 retval = lun->backend->data_submit((union ctl_io *)ctsio);
9448 ctl_report_luns(struct ctl_scsiio *ctsio)
9450 struct scsi_report_luns *cdb;
9451 struct scsi_report_luns_data *lun_data;
9452 struct ctl_lun *lun, *request_lun;
9453 int num_luns, retval;
9454 uint32_t alloc_len, lun_datalen;
9455 int num_filled, well_known;
9456 uint32_t initidx, targ_lun_id, lun_id;
9458 retval = CTL_RETVAL_COMPLETE;
9461 cdb = (struct scsi_report_luns *)ctsio->cdb;
9463 CTL_DEBUG_PRINT(("ctl_report_luns\n"));
9465 mtx_lock(&control_softc->ctl_lock);
9466 num_luns = control_softc->num_luns;
9467 mtx_unlock(&control_softc->ctl_lock);
9469 switch (cdb->select_report) {
9470 case RPL_REPORT_DEFAULT:
9471 case RPL_REPORT_ALL:
9473 case RPL_REPORT_WELLKNOWN:
9478 ctl_set_invalid_field(ctsio,
9484 ctl_done((union ctl_io *)ctsio);
9486 break; /* NOTREACHED */
9489 alloc_len = scsi_4btoul(cdb->length);
9491 * The initiator has to allocate at least 16 bytes for this request,
9492 * so he can at least get the header and the first LUN. Otherwise
9493 * we reject the request (per SPC-3 rev 14, section 6.21).
9495 if (alloc_len < (sizeof(struct scsi_report_luns_data) +
9496 sizeof(struct scsi_report_luns_lundata))) {
9497 ctl_set_invalid_field(ctsio,
9503 ctl_done((union ctl_io *)ctsio);
9507 request_lun = (struct ctl_lun *)
9508 ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9510 lun_datalen = sizeof(*lun_data) +
9511 (num_luns * sizeof(struct scsi_report_luns_lundata));
9513 ctsio->kern_data_ptr = malloc(lun_datalen, M_CTL, M_WAITOK | M_ZERO);
9514 lun_data = (struct scsi_report_luns_data *)ctsio->kern_data_ptr;
9515 ctsio->kern_sg_entries = 0;
9517 initidx = ctl_get_initindex(&ctsio->io_hdr.nexus);
9519 mtx_lock(&control_softc->ctl_lock);
9520 for (targ_lun_id = 0, num_filled = 0; targ_lun_id < CTL_MAX_LUNS && num_filled < num_luns; targ_lun_id++) {
9521 lun_id = ctl_map_lun(ctsio->io_hdr.nexus.targ_port, targ_lun_id);
9522 if (lun_id >= CTL_MAX_LUNS)
9524 lun = control_softc->ctl_luns[lun_id];
9528 if (targ_lun_id <= 0xff) {
9530 * Peripheral addressing method, bus number 0.
9532 lun_data->luns[num_filled].lundata[0] =
9533 RPL_LUNDATA_ATYP_PERIPH;
9534 lun_data->luns[num_filled].lundata[1] = targ_lun_id;
9536 } else if (targ_lun_id <= 0x3fff) {
9538 * Flat addressing method.
9540 lun_data->luns[num_filled].lundata[0] =
9541 RPL_LUNDATA_ATYP_FLAT |
9542 (targ_lun_id & RPL_LUNDATA_FLAT_LUN_MASK);
9543 #ifdef OLDCTLHEADERS
9544 (SRLD_ADDR_FLAT << SRLD_ADDR_SHIFT) |
9545 (targ_lun_id & SRLD_BUS_LUN_MASK);
9547 lun_data->luns[num_filled].lundata[1] =
9548 #ifdef OLDCTLHEADERS
9549 targ_lun_id >> SRLD_BUS_LUN_BITS;
9551 targ_lun_id >> RPL_LUNDATA_FLAT_LUN_BITS;
9554 printf("ctl_report_luns: bogus LUN number %jd, "
9555 "skipping\n", (intmax_t)targ_lun_id);
9558 * According to SPC-3, rev 14 section 6.21:
9560 * "The execution of a REPORT LUNS command to any valid and
9561 * installed logical unit shall clear the REPORTED LUNS DATA
9562 * HAS CHANGED unit attention condition for all logical
9563 * units of that target with respect to the requesting
9564 * initiator. A valid and installed logical unit is one
9565 * having a PERIPHERAL QUALIFIER of 000b in the standard
9566 * INQUIRY data (see 6.4.2)."
9568 * If request_lun is NULL, the LUN this report luns command
9569 * was issued to is either disabled or doesn't exist. In that
9570 * case, we shouldn't clear any pending lun change unit
9573 if (request_lun != NULL) {
9574 mtx_lock(&lun->lun_lock);
9575 lun->pending_ua[initidx] &= ~CTL_UA_LUN_CHANGE;
9576 mtx_unlock(&lun->lun_lock);
9579 mtx_unlock(&control_softc->ctl_lock);
9582 * It's quite possible that we've returned fewer LUNs than we allocated
9583 * space for. Trim it.
9585 lun_datalen = sizeof(*lun_data) +
9586 (num_filled * sizeof(struct scsi_report_luns_lundata));
9588 if (lun_datalen < alloc_len) {
9589 ctsio->residual = alloc_len - lun_datalen;
9590 ctsio->kern_data_len = lun_datalen;
9591 ctsio->kern_total_len = lun_datalen;
9593 ctsio->residual = 0;
9594 ctsio->kern_data_len = alloc_len;
9595 ctsio->kern_total_len = alloc_len;
9597 ctsio->kern_data_resid = 0;
9598 ctsio->kern_rel_offset = 0;
9599 ctsio->kern_sg_entries = 0;
9602 * We set this to the actual data length, regardless of how much
9603 * space we actually have to return results. If the user looks at
9604 * this value, he'll know whether or not he allocated enough space
9605 * and reissue the command if necessary. We don't support well
9606 * known logical units, so if the user asks for that, return none.
9608 scsi_ulto4b(lun_datalen - 8, lun_data->length);
9611 * We can only return SCSI_STATUS_CHECK_COND when we can't satisfy
9614 ctsio->scsi_status = SCSI_STATUS_OK;
9616 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
9617 ctsio->be_move_done = ctl_config_move_done;
9618 ctl_datamove((union ctl_io *)ctsio);
9624 ctl_request_sense(struct ctl_scsiio *ctsio)
9626 struct scsi_request_sense *cdb;
9627 struct scsi_sense_data *sense_ptr;
9628 struct ctl_lun *lun;
9631 scsi_sense_data_type sense_format;
9633 cdb = (struct scsi_request_sense *)ctsio->cdb;
9635 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9637 CTL_DEBUG_PRINT(("ctl_request_sense\n"));
9640 * Determine which sense format the user wants.
9642 if (cdb->byte2 & SRS_DESC)
9643 sense_format = SSD_TYPE_DESC;
9645 sense_format = SSD_TYPE_FIXED;
9647 ctsio->kern_data_ptr = malloc(sizeof(*sense_ptr), M_CTL, M_WAITOK);
9648 sense_ptr = (struct scsi_sense_data *)ctsio->kern_data_ptr;
9649 ctsio->kern_sg_entries = 0;
9652 * struct scsi_sense_data, which is currently set to 256 bytes, is
9653 * larger than the largest allowed value for the length field in the
9654 * REQUEST SENSE CDB, which is 252 bytes as of SPC-4.
9656 ctsio->residual = 0;
9657 ctsio->kern_data_len = cdb->length;
9658 ctsio->kern_total_len = cdb->length;
9660 ctsio->kern_data_resid = 0;
9661 ctsio->kern_rel_offset = 0;
9662 ctsio->kern_sg_entries = 0;
9665 * If we don't have a LUN, we don't have any pending sense.
9671 initidx = ctl_get_initindex(&ctsio->io_hdr.nexus);
9673 * Check for pending sense, and then for pending unit attentions.
9674 * Pending sense gets returned first, then pending unit attentions.
9676 mtx_lock(&lun->lun_lock);
9678 if (ctl_is_set(lun->have_ca, initidx)) {
9679 scsi_sense_data_type stored_format;
9682 * Check to see which sense format was used for the stored
9685 stored_format = scsi_sense_type(&lun->pending_sense[initidx]);
9688 * If the user requested a different sense format than the
9689 * one we stored, then we need to convert it to the other
9690 * format. If we're going from descriptor to fixed format
9691 * sense data, we may lose things in translation, depending
9692 * on what options were used.
9694 * If the stored format is SSD_TYPE_NONE (i.e. invalid),
9695 * for some reason we'll just copy it out as-is.
9697 if ((stored_format == SSD_TYPE_FIXED)
9698 && (sense_format == SSD_TYPE_DESC))
9699 ctl_sense_to_desc((struct scsi_sense_data_fixed *)
9700 &lun->pending_sense[initidx],
9701 (struct scsi_sense_data_desc *)sense_ptr);
9702 else if ((stored_format == SSD_TYPE_DESC)
9703 && (sense_format == SSD_TYPE_FIXED))
9704 ctl_sense_to_fixed((struct scsi_sense_data_desc *)
9705 &lun->pending_sense[initidx],
9706 (struct scsi_sense_data_fixed *)sense_ptr);
9708 memcpy(sense_ptr, &lun->pending_sense[initidx],
9709 ctl_min(sizeof(*sense_ptr),
9710 sizeof(lun->pending_sense[initidx])));
9712 ctl_clear_mask(lun->have_ca, initidx);
9716 if (lun->pending_ua[initidx] != CTL_UA_NONE) {
9717 ctl_ua_type ua_type;
9719 ua_type = ctl_build_ua(&lun->pending_ua[initidx],
9720 sense_ptr, sense_format);
9721 if (ua_type != CTL_UA_NONE)
9724 mtx_unlock(&lun->lun_lock);
9727 * We already have a pending error, return it.
9729 if (have_error != 0) {
9731 * We report the SCSI status as OK, since the status of the
9732 * request sense command itself is OK.
9734 ctsio->scsi_status = SCSI_STATUS_OK;
9737 * We report 0 for the sense length, because we aren't doing
9738 * autosense in this case. We're reporting sense as
9741 ctsio->sense_len = 0;
9742 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
9743 ctsio->be_move_done = ctl_config_move_done;
9744 ctl_datamove((union ctl_io *)ctsio);
9746 return (CTL_RETVAL_COMPLETE);
9752 * No sense information to report, so we report that everything is
9755 ctl_set_sense_data(sense_ptr,
9758 /*current_error*/ 1,
9759 /*sense_key*/ SSD_KEY_NO_SENSE,
9764 ctsio->scsi_status = SCSI_STATUS_OK;
9767 * We report 0 for the sense length, because we aren't doing
9768 * autosense in this case. We're reporting sense as parameter data.
9770 ctsio->sense_len = 0;
9771 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
9772 ctsio->be_move_done = ctl_config_move_done;
9773 ctl_datamove((union ctl_io *)ctsio);
9775 return (CTL_RETVAL_COMPLETE);
9779 ctl_tur(struct ctl_scsiio *ctsio)
9781 struct ctl_lun *lun;
9783 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9785 CTL_DEBUG_PRINT(("ctl_tur\n"));
9790 ctsio->scsi_status = SCSI_STATUS_OK;
9791 ctsio->io_hdr.status = CTL_SUCCESS;
9793 ctl_done((union ctl_io *)ctsio);
9795 return (CTL_RETVAL_COMPLETE);
9800 ctl_cmddt_inquiry(struct ctl_scsiio *ctsio)
9807 ctl_inquiry_evpd_supported(struct ctl_scsiio *ctsio, int alloc_len)
9809 struct scsi_vpd_supported_pages *pages;
9811 struct ctl_lun *lun;
9813 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9815 sup_page_size = sizeof(struct scsi_vpd_supported_pages) *
9816 SCSI_EVPD_NUM_SUPPORTED_PAGES;
9817 ctsio->kern_data_ptr = malloc(sup_page_size, M_CTL, M_WAITOK | M_ZERO);
9818 pages = (struct scsi_vpd_supported_pages *)ctsio->kern_data_ptr;
9819 ctsio->kern_sg_entries = 0;
9821 if (sup_page_size < alloc_len) {
9822 ctsio->residual = alloc_len - sup_page_size;
9823 ctsio->kern_data_len = sup_page_size;
9824 ctsio->kern_total_len = sup_page_size;
9826 ctsio->residual = 0;
9827 ctsio->kern_data_len = alloc_len;
9828 ctsio->kern_total_len = alloc_len;
9830 ctsio->kern_data_resid = 0;
9831 ctsio->kern_rel_offset = 0;
9832 ctsio->kern_sg_entries = 0;
9835 * The control device is always connected. The disk device, on the
9836 * other hand, may not be online all the time. Need to change this
9837 * to figure out whether the disk device is actually online or not.
9840 pages->device = (SID_QUAL_LU_CONNECTED << 5) |
9841 lun->be_lun->lun_type;
9843 pages->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
9845 pages->length = SCSI_EVPD_NUM_SUPPORTED_PAGES;
9846 /* Supported VPD pages */
9847 pages->page_list[0] = SVPD_SUPPORTED_PAGES;
9849 pages->page_list[1] = SVPD_UNIT_SERIAL_NUMBER;
9850 /* Device Identification */
9851 pages->page_list[2] = SVPD_DEVICE_ID;
9852 /* Extended INQUIRY Data */
9853 pages->page_list[3] = SVPD_EXTENDED_INQUIRY_DATA;
9854 /* Mode Page Policy */
9855 pages->page_list[4] = SVPD_MODE_PAGE_POLICY;
9857 pages->page_list[5] = SVPD_SCSI_PORTS;
9858 /* Third-party Copy */
9859 pages->page_list[6] = SVPD_SCSI_TPC;
9861 pages->page_list[7] = SVPD_BLOCK_LIMITS;
9862 /* Block Device Characteristics */
9863 pages->page_list[8] = SVPD_BDC;
9864 /* Logical Block Provisioning */
9865 pages->page_list[9] = SVPD_LBP;
9867 ctsio->scsi_status = SCSI_STATUS_OK;
9869 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
9870 ctsio->be_move_done = ctl_config_move_done;
9871 ctl_datamove((union ctl_io *)ctsio);
9873 return (CTL_RETVAL_COMPLETE);
9877 ctl_inquiry_evpd_serial(struct ctl_scsiio *ctsio, int alloc_len)
9879 struct scsi_vpd_unit_serial_number *sn_ptr;
9880 struct ctl_lun *lun;
9882 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9884 ctsio->kern_data_ptr = malloc(sizeof(*sn_ptr), M_CTL, M_WAITOK | M_ZERO);
9885 sn_ptr = (struct scsi_vpd_unit_serial_number *)ctsio->kern_data_ptr;
9886 ctsio->kern_sg_entries = 0;
9888 if (sizeof(*sn_ptr) < alloc_len) {
9889 ctsio->residual = alloc_len - sizeof(*sn_ptr);
9890 ctsio->kern_data_len = sizeof(*sn_ptr);
9891 ctsio->kern_total_len = sizeof(*sn_ptr);
9893 ctsio->residual = 0;
9894 ctsio->kern_data_len = alloc_len;
9895 ctsio->kern_total_len = alloc_len;
9897 ctsio->kern_data_resid = 0;
9898 ctsio->kern_rel_offset = 0;
9899 ctsio->kern_sg_entries = 0;
9902 * The control device is always connected. The disk device, on the
9903 * other hand, may not be online all the time. Need to change this
9904 * to figure out whether the disk device is actually online or not.
9907 sn_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
9908 lun->be_lun->lun_type;
9910 sn_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
9912 sn_ptr->page_code = SVPD_UNIT_SERIAL_NUMBER;
9913 sn_ptr->length = ctl_min(sizeof(*sn_ptr) - 4, CTL_SN_LEN);
9915 * If we don't have a LUN, we just leave the serial number as
9918 memset(sn_ptr->serial_num, 0x20, sizeof(sn_ptr->serial_num));
9920 strncpy((char *)sn_ptr->serial_num,
9921 (char *)lun->be_lun->serial_num, CTL_SN_LEN);
9923 ctsio->scsi_status = SCSI_STATUS_OK;
9925 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
9926 ctsio->be_move_done = ctl_config_move_done;
9927 ctl_datamove((union ctl_io *)ctsio);
9929 return (CTL_RETVAL_COMPLETE);
9934 ctl_inquiry_evpd_eid(struct ctl_scsiio *ctsio, int alloc_len)
9936 struct scsi_vpd_extended_inquiry_data *eid_ptr;
9937 struct ctl_lun *lun;
9940 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9942 data_len = sizeof(struct scsi_vpd_extended_inquiry_data);
9943 ctsio->kern_data_ptr = malloc(data_len, M_CTL, M_WAITOK | M_ZERO);
9944 eid_ptr = (struct scsi_vpd_extended_inquiry_data *)ctsio->kern_data_ptr;
9945 ctsio->kern_sg_entries = 0;
9947 if (data_len < alloc_len) {
9948 ctsio->residual = alloc_len - data_len;
9949 ctsio->kern_data_len = data_len;
9950 ctsio->kern_total_len = data_len;
9952 ctsio->residual = 0;
9953 ctsio->kern_data_len = alloc_len;
9954 ctsio->kern_total_len = alloc_len;
9956 ctsio->kern_data_resid = 0;
9957 ctsio->kern_rel_offset = 0;
9958 ctsio->kern_sg_entries = 0;
9961 * The control device is always connected. The disk device, on the
9962 * other hand, may not be online all the time.
9965 eid_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
9966 lun->be_lun->lun_type;
9968 eid_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
9969 eid_ptr->page_code = SVPD_EXTENDED_INQUIRY_DATA;
9970 eid_ptr->page_length = data_len - 4;
9971 eid_ptr->flags2 = SVPD_EID_HEADSUP | SVPD_EID_ORDSUP | SVPD_EID_SIMPSUP;
9972 eid_ptr->flags3 = SVPD_EID_V_SUP;
9974 ctsio->scsi_status = SCSI_STATUS_OK;
9975 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
9976 ctsio->be_move_done = ctl_config_move_done;
9977 ctl_datamove((union ctl_io *)ctsio);
9979 return (CTL_RETVAL_COMPLETE);
9983 ctl_inquiry_evpd_mpp(struct ctl_scsiio *ctsio, int alloc_len)
9985 struct scsi_vpd_mode_page_policy *mpp_ptr;
9986 struct ctl_lun *lun;
9989 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
9991 data_len = sizeof(struct scsi_vpd_mode_page_policy) +
9992 sizeof(struct scsi_vpd_mode_page_policy_descr);
9994 ctsio->kern_data_ptr = malloc(data_len, M_CTL, M_WAITOK | M_ZERO);
9995 mpp_ptr = (struct scsi_vpd_mode_page_policy *)ctsio->kern_data_ptr;
9996 ctsio->kern_sg_entries = 0;
9998 if (data_len < alloc_len) {
9999 ctsio->residual = alloc_len - data_len;
10000 ctsio->kern_data_len = data_len;
10001 ctsio->kern_total_len = data_len;
10003 ctsio->residual = 0;
10004 ctsio->kern_data_len = alloc_len;
10005 ctsio->kern_total_len = alloc_len;
10007 ctsio->kern_data_resid = 0;
10008 ctsio->kern_rel_offset = 0;
10009 ctsio->kern_sg_entries = 0;
10012 * The control device is always connected. The disk device, on the
10013 * other hand, may not be online all the time.
10016 mpp_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
10017 lun->be_lun->lun_type;
10019 mpp_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
10020 mpp_ptr->page_code = SVPD_MODE_PAGE_POLICY;
10021 scsi_ulto2b(data_len - 4, mpp_ptr->page_length);
10022 mpp_ptr->descr[0].page_code = 0x3f;
10023 mpp_ptr->descr[0].subpage_code = 0xff;
10024 mpp_ptr->descr[0].policy = SVPD_MPP_SHARED;
10026 ctsio->scsi_status = SCSI_STATUS_OK;
10027 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
10028 ctsio->be_move_done = ctl_config_move_done;
10029 ctl_datamove((union ctl_io *)ctsio);
10031 return (CTL_RETVAL_COMPLETE);
10035 ctl_inquiry_evpd_devid(struct ctl_scsiio *ctsio, int alloc_len)
10037 struct scsi_vpd_device_id *devid_ptr;
10038 struct scsi_vpd_id_descriptor *desc;
10039 struct ctl_softc *ctl_softc;
10040 struct ctl_lun *lun;
10041 struct ctl_port *port;
10045 ctl_softc = control_softc;
10047 port = ctl_softc->ctl_ports[ctl_port_idx(ctsio->io_hdr.nexus.targ_port)];
10048 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
10050 data_len = sizeof(struct scsi_vpd_device_id) +
10051 sizeof(struct scsi_vpd_id_descriptor) +
10052 sizeof(struct scsi_vpd_id_rel_trgt_port_id) +
10053 sizeof(struct scsi_vpd_id_descriptor) +
10054 sizeof(struct scsi_vpd_id_trgt_port_grp_id);
10055 if (lun && lun->lun_devid)
10056 data_len += lun->lun_devid->len;
10057 if (port->port_devid)
10058 data_len += port->port_devid->len;
10059 if (port->target_devid)
10060 data_len += port->target_devid->len;
10062 ctsio->kern_data_ptr = malloc(data_len, M_CTL, M_WAITOK | M_ZERO);
10063 devid_ptr = (struct scsi_vpd_device_id *)ctsio->kern_data_ptr;
10064 ctsio->kern_sg_entries = 0;
10066 if (data_len < alloc_len) {
10067 ctsio->residual = alloc_len - data_len;
10068 ctsio->kern_data_len = data_len;
10069 ctsio->kern_total_len = data_len;
10071 ctsio->residual = 0;
10072 ctsio->kern_data_len = alloc_len;
10073 ctsio->kern_total_len = alloc_len;
10075 ctsio->kern_data_resid = 0;
10076 ctsio->kern_rel_offset = 0;
10077 ctsio->kern_sg_entries = 0;
10080 * The control device is always connected. The disk device, on the
10081 * other hand, may not be online all the time.
10084 devid_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
10085 lun->be_lun->lun_type;
10087 devid_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
10088 devid_ptr->page_code = SVPD_DEVICE_ID;
10089 scsi_ulto2b(data_len - 4, devid_ptr->length);
10091 if (port->port_type == CTL_PORT_FC)
10092 proto = SCSI_PROTO_FC << 4;
10093 else if (port->port_type == CTL_PORT_ISCSI)
10094 proto = SCSI_PROTO_ISCSI << 4;
10096 proto = SCSI_PROTO_SPI << 4;
10097 desc = (struct scsi_vpd_id_descriptor *)devid_ptr->desc_list;
10100 * We're using a LUN association here. i.e., this device ID is a
10101 * per-LUN identifier.
10103 if (lun && lun->lun_devid) {
10104 memcpy(desc, lun->lun_devid->data, lun->lun_devid->len);
10105 desc = (struct scsi_vpd_id_descriptor *)((uint8_t *)desc +
10106 lun->lun_devid->len);
10110 * This is for the WWPN which is a port association.
10112 if (port->port_devid) {
10113 memcpy(desc, port->port_devid->data, port->port_devid->len);
10114 desc = (struct scsi_vpd_id_descriptor *)((uint8_t *)desc +
10115 port->port_devid->len);
10119 * This is for the Relative Target Port(type 4h) identifier
10121 desc->proto_codeset = proto | SVPD_ID_CODESET_BINARY;
10122 desc->id_type = SVPD_ID_PIV | SVPD_ID_ASSOC_PORT |
10123 SVPD_ID_TYPE_RELTARG;
10125 scsi_ulto2b(ctsio->io_hdr.nexus.targ_port, &desc->identifier[2]);
10126 desc = (struct scsi_vpd_id_descriptor *)(&desc->identifier[0] +
10127 sizeof(struct scsi_vpd_id_rel_trgt_port_id));
10130 * This is for the Target Port Group(type 5h) identifier
10132 desc->proto_codeset = proto | SVPD_ID_CODESET_BINARY;
10133 desc->id_type = SVPD_ID_PIV | SVPD_ID_ASSOC_PORT |
10134 SVPD_ID_TYPE_TPORTGRP;
10136 scsi_ulto2b(ctsio->io_hdr.nexus.targ_port / CTL_MAX_PORTS + 1,
10137 &desc->identifier[2]);
10138 desc = (struct scsi_vpd_id_descriptor *)(&desc->identifier[0] +
10139 sizeof(struct scsi_vpd_id_trgt_port_grp_id));
10142 * This is for the Target identifier
10144 if (port->target_devid) {
10145 memcpy(desc, port->target_devid->data, port->target_devid->len);
10148 ctsio->scsi_status = SCSI_STATUS_OK;
10149 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
10150 ctsio->be_move_done = ctl_config_move_done;
10151 ctl_datamove((union ctl_io *)ctsio);
10153 return (CTL_RETVAL_COMPLETE);
10157 ctl_inquiry_evpd_scsi_ports(struct ctl_scsiio *ctsio, int alloc_len)
10159 struct ctl_softc *softc = control_softc;
10160 struct scsi_vpd_scsi_ports *sp;
10161 struct scsi_vpd_port_designation *pd;
10162 struct scsi_vpd_port_designation_cont *pdc;
10163 struct ctl_lun *lun;
10164 struct ctl_port *port;
10165 int data_len, num_target_ports, iid_len, id_len, g, pg, p;
10166 int num_target_port_groups, single;
10168 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
10170 single = ctl_is_single;
10172 num_target_port_groups = 1;
10174 num_target_port_groups = NUM_TARGET_PORT_GROUPS;
10175 num_target_ports = 0;
10178 mtx_lock(&softc->ctl_lock);
10179 STAILQ_FOREACH(port, &softc->port_list, links) {
10180 if ((port->status & CTL_PORT_STATUS_ONLINE) == 0)
10183 ctl_map_lun_back(port->targ_port, lun->lun) >=
10186 num_target_ports++;
10187 if (port->init_devid)
10188 iid_len += port->init_devid->len;
10189 if (port->port_devid)
10190 id_len += port->port_devid->len;
10192 mtx_unlock(&softc->ctl_lock);
10194 data_len = sizeof(struct scsi_vpd_scsi_ports) + num_target_port_groups *
10195 num_target_ports * (sizeof(struct scsi_vpd_port_designation) +
10196 sizeof(struct scsi_vpd_port_designation_cont)) + iid_len + id_len;
10197 ctsio->kern_data_ptr = malloc(data_len, M_CTL, M_WAITOK | M_ZERO);
10198 sp = (struct scsi_vpd_scsi_ports *)ctsio->kern_data_ptr;
10199 ctsio->kern_sg_entries = 0;
10201 if (data_len < alloc_len) {
10202 ctsio->residual = alloc_len - data_len;
10203 ctsio->kern_data_len = data_len;
10204 ctsio->kern_total_len = data_len;
10206 ctsio->residual = 0;
10207 ctsio->kern_data_len = alloc_len;
10208 ctsio->kern_total_len = alloc_len;
10210 ctsio->kern_data_resid = 0;
10211 ctsio->kern_rel_offset = 0;
10212 ctsio->kern_sg_entries = 0;
10215 * The control device is always connected. The disk device, on the
10216 * other hand, may not be online all the time. Need to change this
10217 * to figure out whether the disk device is actually online or not.
10220 sp->device = (SID_QUAL_LU_CONNECTED << 5) |
10221 lun->be_lun->lun_type;
10223 sp->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
10225 sp->page_code = SVPD_SCSI_PORTS;
10226 scsi_ulto2b(data_len - sizeof(struct scsi_vpd_scsi_ports),
10228 pd = &sp->design[0];
10230 mtx_lock(&softc->ctl_lock);
10231 if (softc->flags & CTL_FLAG_MASTER_SHELF)
10235 for (g = 0; g < num_target_port_groups; g++) {
10236 STAILQ_FOREACH(port, &softc->port_list, links) {
10237 if ((port->status & CTL_PORT_STATUS_ONLINE) == 0)
10240 ctl_map_lun_back(port->targ_port, lun->lun) >=
10243 p = port->targ_port % CTL_MAX_PORTS + g * CTL_MAX_PORTS;
10244 scsi_ulto2b(p, pd->relative_port_id);
10245 if (port->init_devid && g == pg) {
10246 iid_len = port->init_devid->len;
10247 memcpy(pd->initiator_transportid,
10248 port->init_devid->data, port->init_devid->len);
10251 scsi_ulto2b(iid_len, pd->initiator_transportid_length);
10252 pdc = (struct scsi_vpd_port_designation_cont *)
10253 (&pd->initiator_transportid[iid_len]);
10254 if (port->port_devid && g == pg) {
10255 id_len = port->port_devid->len;
10256 memcpy(pdc->target_port_descriptors,
10257 port->port_devid->data, port->port_devid->len);
10260 scsi_ulto2b(id_len, pdc->target_port_descriptors_length);
10261 pd = (struct scsi_vpd_port_designation *)
10262 ((uint8_t *)pdc->target_port_descriptors + id_len);
10265 mtx_unlock(&softc->ctl_lock);
10267 ctsio->scsi_status = SCSI_STATUS_OK;
10268 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
10269 ctsio->be_move_done = ctl_config_move_done;
10270 ctl_datamove((union ctl_io *)ctsio);
10272 return (CTL_RETVAL_COMPLETE);
10276 ctl_inquiry_evpd_block_limits(struct ctl_scsiio *ctsio, int alloc_len)
10278 struct scsi_vpd_block_limits *bl_ptr;
10279 struct ctl_lun *lun;
10282 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
10284 ctsio->kern_data_ptr = malloc(sizeof(*bl_ptr), M_CTL, M_WAITOK | M_ZERO);
10285 bl_ptr = (struct scsi_vpd_block_limits *)ctsio->kern_data_ptr;
10286 ctsio->kern_sg_entries = 0;
10288 if (sizeof(*bl_ptr) < alloc_len) {
10289 ctsio->residual = alloc_len - sizeof(*bl_ptr);
10290 ctsio->kern_data_len = sizeof(*bl_ptr);
10291 ctsio->kern_total_len = sizeof(*bl_ptr);
10293 ctsio->residual = 0;
10294 ctsio->kern_data_len = alloc_len;
10295 ctsio->kern_total_len = alloc_len;
10297 ctsio->kern_data_resid = 0;
10298 ctsio->kern_rel_offset = 0;
10299 ctsio->kern_sg_entries = 0;
10302 * The control device is always connected. The disk device, on the
10303 * other hand, may not be online all the time. Need to change this
10304 * to figure out whether the disk device is actually online or not.
10307 bl_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
10308 lun->be_lun->lun_type;
10310 bl_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
10312 bl_ptr->page_code = SVPD_BLOCK_LIMITS;
10313 scsi_ulto2b(sizeof(*bl_ptr) - 4, bl_ptr->page_length);
10314 bl_ptr->max_cmp_write_len = 0xff;
10315 scsi_ulto4b(0xffffffff, bl_ptr->max_txfer_len);
10317 bs = lun->be_lun->blocksize;
10318 scsi_ulto4b(MAXPHYS / bs, bl_ptr->opt_txfer_len);
10319 if (lun->be_lun->flags & CTL_LUN_FLAG_UNMAP) {
10320 scsi_ulto4b(0xffffffff, bl_ptr->max_unmap_lba_cnt);
10321 scsi_ulto4b(0xffffffff, bl_ptr->max_unmap_blk_cnt);
10322 if (lun->be_lun->pblockexp != 0) {
10323 scsi_ulto4b((1 << lun->be_lun->pblockexp),
10324 bl_ptr->opt_unmap_grain);
10325 scsi_ulto4b(0x80000000 | lun->be_lun->pblockoff,
10326 bl_ptr->unmap_grain_align);
10329 scsi_ulto4b(lun->be_lun->atomicblock,
10330 bl_ptr->max_atomic_transfer_length);
10331 scsi_ulto4b(0, bl_ptr->atomic_alignment);
10332 scsi_ulto4b(0, bl_ptr->atomic_transfer_length_granularity);
10334 scsi_u64to8b(UINT64_MAX, bl_ptr->max_write_same_length);
10336 ctsio->scsi_status = SCSI_STATUS_OK;
10337 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
10338 ctsio->be_move_done = ctl_config_move_done;
10339 ctl_datamove((union ctl_io *)ctsio);
10341 return (CTL_RETVAL_COMPLETE);
10345 ctl_inquiry_evpd_bdc(struct ctl_scsiio *ctsio, int alloc_len)
10347 struct scsi_vpd_block_device_characteristics *bdc_ptr;
10348 struct ctl_lun *lun;
10350 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
10352 ctsio->kern_data_ptr = malloc(sizeof(*bdc_ptr), M_CTL, M_WAITOK | M_ZERO);
10353 bdc_ptr = (struct scsi_vpd_block_device_characteristics *)ctsio->kern_data_ptr;
10354 ctsio->kern_sg_entries = 0;
10356 if (sizeof(*bdc_ptr) < alloc_len) {
10357 ctsio->residual = alloc_len - sizeof(*bdc_ptr);
10358 ctsio->kern_data_len = sizeof(*bdc_ptr);
10359 ctsio->kern_total_len = sizeof(*bdc_ptr);
10361 ctsio->residual = 0;
10362 ctsio->kern_data_len = alloc_len;
10363 ctsio->kern_total_len = alloc_len;
10365 ctsio->kern_data_resid = 0;
10366 ctsio->kern_rel_offset = 0;
10367 ctsio->kern_sg_entries = 0;
10370 * The control device is always connected. The disk device, on the
10371 * other hand, may not be online all the time. Need to change this
10372 * to figure out whether the disk device is actually online or not.
10375 bdc_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
10376 lun->be_lun->lun_type;
10378 bdc_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
10379 bdc_ptr->page_code = SVPD_BDC;
10380 scsi_ulto2b(sizeof(*bdc_ptr) - 4, bdc_ptr->page_length);
10381 scsi_ulto2b(SVPD_NON_ROTATING, bdc_ptr->medium_rotation_rate);
10382 bdc_ptr->flags = SVPD_FUAB | SVPD_VBULS;
10384 ctsio->scsi_status = SCSI_STATUS_OK;
10385 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
10386 ctsio->be_move_done = ctl_config_move_done;
10387 ctl_datamove((union ctl_io *)ctsio);
10389 return (CTL_RETVAL_COMPLETE);
10393 ctl_inquiry_evpd_lbp(struct ctl_scsiio *ctsio, int alloc_len)
10395 struct scsi_vpd_logical_block_prov *lbp_ptr;
10396 struct ctl_lun *lun;
10398 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
10400 ctsio->kern_data_ptr = malloc(sizeof(*lbp_ptr), M_CTL, M_WAITOK | M_ZERO);
10401 lbp_ptr = (struct scsi_vpd_logical_block_prov *)ctsio->kern_data_ptr;
10402 ctsio->kern_sg_entries = 0;
10404 if (sizeof(*lbp_ptr) < alloc_len) {
10405 ctsio->residual = alloc_len - sizeof(*lbp_ptr);
10406 ctsio->kern_data_len = sizeof(*lbp_ptr);
10407 ctsio->kern_total_len = sizeof(*lbp_ptr);
10409 ctsio->residual = 0;
10410 ctsio->kern_data_len = alloc_len;
10411 ctsio->kern_total_len = alloc_len;
10413 ctsio->kern_data_resid = 0;
10414 ctsio->kern_rel_offset = 0;
10415 ctsio->kern_sg_entries = 0;
10418 * The control device is always connected. The disk device, on the
10419 * other hand, may not be online all the time. Need to change this
10420 * to figure out whether the disk device is actually online or not.
10423 lbp_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
10424 lun->be_lun->lun_type;
10426 lbp_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
10428 lbp_ptr->page_code = SVPD_LBP;
10429 scsi_ulto2b(sizeof(*lbp_ptr) - 4, lbp_ptr->page_length);
10430 if (lun != NULL && lun->be_lun->flags & CTL_LUN_FLAG_UNMAP) {
10431 lbp_ptr->flags = SVPD_LBP_UNMAP | SVPD_LBP_WS16 |
10432 SVPD_LBP_WS10 | SVPD_LBP_RZ | SVPD_LBP_ANC_SUP;
10433 lbp_ptr->prov_type = SVPD_LBP_RESOURCE;
10436 ctsio->scsi_status = SCSI_STATUS_OK;
10437 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
10438 ctsio->be_move_done = ctl_config_move_done;
10439 ctl_datamove((union ctl_io *)ctsio);
10441 return (CTL_RETVAL_COMPLETE);
10445 ctl_inquiry_evpd(struct ctl_scsiio *ctsio)
10447 struct scsi_inquiry *cdb;
10448 struct ctl_lun *lun;
10449 int alloc_len, retval;
10451 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
10452 cdb = (struct scsi_inquiry *)ctsio->cdb;
10454 retval = CTL_RETVAL_COMPLETE;
10456 alloc_len = scsi_2btoul(cdb->length);
10458 switch (cdb->page_code) {
10459 case SVPD_SUPPORTED_PAGES:
10460 retval = ctl_inquiry_evpd_supported(ctsio, alloc_len);
10462 case SVPD_UNIT_SERIAL_NUMBER:
10463 retval = ctl_inquiry_evpd_serial(ctsio, alloc_len);
10465 case SVPD_DEVICE_ID:
10466 retval = ctl_inquiry_evpd_devid(ctsio, alloc_len);
10468 case SVPD_EXTENDED_INQUIRY_DATA:
10469 retval = ctl_inquiry_evpd_eid(ctsio, alloc_len);
10471 case SVPD_MODE_PAGE_POLICY:
10472 retval = ctl_inquiry_evpd_mpp(ctsio, alloc_len);
10474 case SVPD_SCSI_PORTS:
10475 retval = ctl_inquiry_evpd_scsi_ports(ctsio, alloc_len);
10477 case SVPD_SCSI_TPC:
10478 retval = ctl_inquiry_evpd_tpc(ctsio, alloc_len);
10480 case SVPD_BLOCK_LIMITS:
10481 retval = ctl_inquiry_evpd_block_limits(ctsio, alloc_len);
10484 retval = ctl_inquiry_evpd_bdc(ctsio, alloc_len);
10487 retval = ctl_inquiry_evpd_lbp(ctsio, alloc_len);
10490 ctl_set_invalid_field(ctsio,
10496 ctl_done((union ctl_io *)ctsio);
10497 retval = CTL_RETVAL_COMPLETE;
10505 ctl_inquiry_std(struct ctl_scsiio *ctsio)
10507 struct scsi_inquiry_data *inq_ptr;
10508 struct scsi_inquiry *cdb;
10509 struct ctl_softc *ctl_softc;
10510 struct ctl_lun *lun;
10512 uint32_t alloc_len, data_len;
10513 ctl_port_type port_type;
10515 ctl_softc = control_softc;
10518 * Figure out whether we're talking to a Fibre Channel port or not.
10519 * We treat the ioctl front end, and any SCSI adapters, as packetized
10522 port_type = ctl_softc->ctl_ports[
10523 ctl_port_idx(ctsio->io_hdr.nexus.targ_port)]->port_type;
10524 if (port_type == CTL_PORT_IOCTL || port_type == CTL_PORT_INTERNAL)
10525 port_type = CTL_PORT_SCSI;
10527 lun = ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
10528 cdb = (struct scsi_inquiry *)ctsio->cdb;
10529 alloc_len = scsi_2btoul(cdb->length);
10532 * We malloc the full inquiry data size here and fill it
10533 * in. If the user only asks for less, we'll give him
10536 data_len = offsetof(struct scsi_inquiry_data, vendor_specific1);
10537 ctsio->kern_data_ptr = malloc(data_len, M_CTL, M_WAITOK | M_ZERO);
10538 inq_ptr = (struct scsi_inquiry_data *)ctsio->kern_data_ptr;
10539 ctsio->kern_sg_entries = 0;
10540 ctsio->kern_data_resid = 0;
10541 ctsio->kern_rel_offset = 0;
10543 if (data_len < alloc_len) {
10544 ctsio->residual = alloc_len - data_len;
10545 ctsio->kern_data_len = data_len;
10546 ctsio->kern_total_len = data_len;
10548 ctsio->residual = 0;
10549 ctsio->kern_data_len = alloc_len;
10550 ctsio->kern_total_len = alloc_len;
10554 * If we have a LUN configured, report it as connected. Otherwise,
10555 * report that it is offline or no device is supported, depending
10556 * on the value of inquiry_pq_no_lun.
10558 * According to the spec (SPC-4 r34), the peripheral qualifier
10559 * SID_QUAL_LU_OFFLINE (001b) is used in the following scenario:
10561 * "A peripheral device having the specified peripheral device type
10562 * is not connected to this logical unit. However, the device
10563 * server is capable of supporting the specified peripheral device
10564 * type on this logical unit."
10566 * According to the same spec, the peripheral qualifier
10567 * SID_QUAL_BAD_LU (011b) is used in this scenario:
10569 * "The device server is not capable of supporting a peripheral
10570 * device on this logical unit. For this peripheral qualifier the
10571 * peripheral device type shall be set to 1Fh. All other peripheral
10572 * device type values are reserved for this peripheral qualifier."
10574 * Given the text, it would seem that we probably want to report that
10575 * the LUN is offline here. There is no LUN connected, but we can
10576 * support a LUN at the given LUN number.
10578 * In the real world, though, it sounds like things are a little
10581 * - Linux, when presented with a LUN with the offline peripheral
10582 * qualifier, will create an sg driver instance for it. So when
10583 * you attach it to CTL, you wind up with a ton of sg driver
10584 * instances. (One for every LUN that Linux bothered to probe.)
10585 * Linux does this despite the fact that it issues a REPORT LUNs
10586 * to LUN 0 to get the inventory of supported LUNs.
10588 * - There is other anecdotal evidence (from Emulex folks) about
10589 * arrays that use the offline peripheral qualifier for LUNs that
10590 * are on the "passive" path in an active/passive array.
10592 * So the solution is provide a hopefully reasonable default
10593 * (return bad/no LUN) and allow the user to change the behavior
10594 * with a tunable/sysctl variable.
10597 inq_ptr->device = (SID_QUAL_LU_CONNECTED << 5) |
10598 lun->be_lun->lun_type;
10599 else if (ctl_softc->inquiry_pq_no_lun == 0)
10600 inq_ptr->device = (SID_QUAL_LU_OFFLINE << 5) | T_DIRECT;
10602 inq_ptr->device = (SID_QUAL_BAD_LU << 5) | T_NODEVICE;
10604 /* RMB in byte 2 is 0 */
10605 inq_ptr->version = SCSI_REV_SPC4;
10608 * According to SAM-3, even if a device only supports a single
10609 * level of LUN addressing, it should still set the HISUP bit:
10611 * 4.9.1 Logical unit numbers overview
10613 * All logical unit number formats described in this standard are
10614 * hierarchical in structure even when only a single level in that
10615 * hierarchy is used. The HISUP bit shall be set to one in the
10616 * standard INQUIRY data (see SPC-2) when any logical unit number
10617 * format described in this standard is used. Non-hierarchical
10618 * formats are outside the scope of this standard.
10620 * Therefore we set the HiSup bit here.
10622 * The reponse format is 2, per SPC-3.
10624 inq_ptr->response_format = SID_HiSup | 2;
10626 inq_ptr->additional_length = data_len -
10627 (offsetof(struct scsi_inquiry_data, additional_length) + 1);
10628 CTL_DEBUG_PRINT(("additional_length = %d\n",
10629 inq_ptr->additional_length));
10631 inq_ptr->spc3_flags = SPC3_SID_3PC | SPC3_SID_TPGS_IMPLICIT;
10632 /* 16 bit addressing */
10633 if (port_type == CTL_PORT_SCSI)
10634 inq_ptr->spc2_flags = SPC2_SID_ADDR16;
10635 /* XXX set the SID_MultiP bit here if we're actually going to
10636 respond on multiple ports */
10637 inq_ptr->spc2_flags |= SPC2_SID_MultiP;
10639 /* 16 bit data bus, synchronous transfers */
10640 if (port_type == CTL_PORT_SCSI)
10641 inq_ptr->flags = SID_WBus16 | SID_Sync;
10643 * XXX KDM do we want to support tagged queueing on the control
10647 || (lun->be_lun->lun_type != T_PROCESSOR))
10648 inq_ptr->flags |= SID_CmdQue;
10650 * Per SPC-3, unused bytes in ASCII strings are filled with spaces.
10651 * We have 8 bytes for the vendor name, and 16 bytes for the device
10652 * name and 4 bytes for the revision.
10654 if (lun == NULL || (val = ctl_get_opt(&lun->be_lun->options,
10655 "vendor")) == NULL) {
10656 strncpy(inq_ptr->vendor, CTL_VENDOR, sizeof(inq_ptr->vendor));
10658 memset(inq_ptr->vendor, ' ', sizeof(inq_ptr->vendor));
10659 strncpy(inq_ptr->vendor, val,
10660 min(sizeof(inq_ptr->vendor), strlen(val)));
10663 strncpy(inq_ptr->product, CTL_DIRECT_PRODUCT,
10664 sizeof(inq_ptr->product));
10665 } else if ((val = ctl_get_opt(&lun->be_lun->options, "product")) == NULL) {
10666 switch (lun->be_lun->lun_type) {
10668 strncpy(inq_ptr->product, CTL_DIRECT_PRODUCT,
10669 sizeof(inq_ptr->product));
10672 strncpy(inq_ptr->product, CTL_PROCESSOR_PRODUCT,
10673 sizeof(inq_ptr->product));
10676 strncpy(inq_ptr->product, CTL_UNKNOWN_PRODUCT,
10677 sizeof(inq_ptr->product));
10681 memset(inq_ptr->product, ' ', sizeof(inq_ptr->product));
10682 strncpy(inq_ptr->product, val,
10683 min(sizeof(inq_ptr->product), strlen(val)));
10687 * XXX make this a macro somewhere so it automatically gets
10688 * incremented when we make changes.
10690 if (lun == NULL || (val = ctl_get_opt(&lun->be_lun->options,
10691 "revision")) == NULL) {
10692 strncpy(inq_ptr->revision, "0001", sizeof(inq_ptr->revision));
10694 memset(inq_ptr->revision, ' ', sizeof(inq_ptr->revision));
10695 strncpy(inq_ptr->revision, val,
10696 min(sizeof(inq_ptr->revision), strlen(val)));
10700 * For parallel SCSI, we support double transition and single
10701 * transition clocking. We also support QAS (Quick Arbitration
10702 * and Selection) and Information Unit transfers on both the
10703 * control and array devices.
10705 if (port_type == CTL_PORT_SCSI)
10706 inq_ptr->spi3data = SID_SPI_CLOCK_DT_ST | SID_SPI_QAS |
10709 /* SAM-5 (no version claimed) */
10710 scsi_ulto2b(0x00A0, inq_ptr->version1);
10711 /* SPC-4 (no version claimed) */
10712 scsi_ulto2b(0x0460, inq_ptr->version2);
10713 if (port_type == CTL_PORT_FC) {
10714 /* FCP-2 ANSI INCITS.350:2003 */
10715 scsi_ulto2b(0x0917, inq_ptr->version3);
10716 } else if (port_type == CTL_PORT_SCSI) {
10717 /* SPI-4 ANSI INCITS.362:200x */
10718 scsi_ulto2b(0x0B56, inq_ptr->version3);
10719 } else if (port_type == CTL_PORT_ISCSI) {
10720 /* iSCSI (no version claimed) */
10721 scsi_ulto2b(0x0960, inq_ptr->version3);
10722 } else if (port_type == CTL_PORT_SAS) {
10723 /* SAS (no version claimed) */
10724 scsi_ulto2b(0x0BE0, inq_ptr->version3);
10728 /* SBC-4 (no version claimed) */
10729 scsi_ulto2b(0x0600, inq_ptr->version4);
10731 switch (lun->be_lun->lun_type) {
10733 /* SBC-4 (no version claimed) */
10734 scsi_ulto2b(0x0600, inq_ptr->version4);
10742 ctsio->scsi_status = SCSI_STATUS_OK;
10743 if (ctsio->kern_data_len > 0) {
10744 ctsio->io_hdr.flags |= CTL_FLAG_ALLOCATED;
10745 ctsio->be_move_done = ctl_config_move_done;
10746 ctl_datamove((union ctl_io *)ctsio);
10748 ctsio->io_hdr.status = CTL_SUCCESS;
10749 ctl_done((union ctl_io *)ctsio);
10752 return (CTL_RETVAL_COMPLETE);
10756 ctl_inquiry(struct ctl_scsiio *ctsio)
10758 struct scsi_inquiry *cdb;
10761 CTL_DEBUG_PRINT(("ctl_inquiry\n"));
10763 cdb = (struct scsi_inquiry *)ctsio->cdb;
10764 if (cdb->byte2 & SI_EVPD)
10765 retval = ctl_inquiry_evpd(ctsio);
10766 else if (cdb->page_code == 0)
10767 retval = ctl_inquiry_std(ctsio);
10769 ctl_set_invalid_field(ctsio,
10775 ctl_done((union ctl_io *)ctsio);
10776 return (CTL_RETVAL_COMPLETE);
10783 * For known CDB types, parse the LBA and length.
10786 ctl_get_lba_len(union ctl_io *io, uint64_t *lba, uint64_t *len)
10788 if (io->io_hdr.io_type != CTL_IO_SCSI)
10791 switch (io->scsiio.cdb[0]) {
10792 case COMPARE_AND_WRITE: {
10793 struct scsi_compare_and_write *cdb;
10795 cdb = (struct scsi_compare_and_write *)io->scsiio.cdb;
10797 *lba = scsi_8btou64(cdb->addr);
10798 *len = cdb->length;
10803 struct scsi_rw_6 *cdb;
10805 cdb = (struct scsi_rw_6 *)io->scsiio.cdb;
10807 *lba = scsi_3btoul(cdb->addr);
10808 /* only 5 bits are valid in the most significant address byte */
10810 *len = cdb->length;
10815 struct scsi_rw_10 *cdb;
10817 cdb = (struct scsi_rw_10 *)io->scsiio.cdb;
10819 *lba = scsi_4btoul(cdb->addr);
10820 *len = scsi_2btoul(cdb->length);
10823 case WRITE_VERIFY_10: {
10824 struct scsi_write_verify_10 *cdb;
10826 cdb = (struct scsi_write_verify_10 *)io->scsiio.cdb;
10828 *lba = scsi_4btoul(cdb->addr);
10829 *len = scsi_2btoul(cdb->length);
10834 struct scsi_rw_12 *cdb;
10836 cdb = (struct scsi_rw_12 *)io->scsiio.cdb;
10838 *lba = scsi_4btoul(cdb->addr);
10839 *len = scsi_4btoul(cdb->length);
10842 case WRITE_VERIFY_12: {
10843 struct scsi_write_verify_12 *cdb;
10845 cdb = (struct scsi_write_verify_12 *)io->scsiio.cdb;
10847 *lba = scsi_4btoul(cdb->addr);
10848 *len = scsi_4btoul(cdb->length);
10853 case WRITE_ATOMIC_16: {
10854 struct scsi_rw_16 *cdb;
10856 cdb = (struct scsi_rw_16 *)io->scsiio.cdb;
10858 *lba = scsi_8btou64(cdb->addr);
10859 *len = scsi_4btoul(cdb->length);
10862 case WRITE_VERIFY_16: {
10863 struct scsi_write_verify_16 *cdb;
10865 cdb = (struct scsi_write_verify_16 *)io->scsiio.cdb;
10867 *lba = scsi_8btou64(cdb->addr);
10868 *len = scsi_4btoul(cdb->length);
10871 case WRITE_SAME_10: {
10872 struct scsi_write_same_10 *cdb;
10874 cdb = (struct scsi_write_same_10 *)io->scsiio.cdb;
10876 *lba = scsi_4btoul(cdb->addr);
10877 *len = scsi_2btoul(cdb->length);
10880 case WRITE_SAME_16: {
10881 struct scsi_write_same_16 *cdb;
10883 cdb = (struct scsi_write_same_16 *)io->scsiio.cdb;
10885 *lba = scsi_8btou64(cdb->addr);
10886 *len = scsi_4btoul(cdb->length);
10890 struct scsi_verify_10 *cdb;
10892 cdb = (struct scsi_verify_10 *)io->scsiio.cdb;
10894 *lba = scsi_4btoul(cdb->addr);
10895 *len = scsi_2btoul(cdb->length);
10899 struct scsi_verify_12 *cdb;
10901 cdb = (struct scsi_verify_12 *)io->scsiio.cdb;
10903 *lba = scsi_4btoul(cdb->addr);
10904 *len = scsi_4btoul(cdb->length);
10908 struct scsi_verify_16 *cdb;
10910 cdb = (struct scsi_verify_16 *)io->scsiio.cdb;
10912 *lba = scsi_8btou64(cdb->addr);
10913 *len = scsi_4btoul(cdb->length);
10923 break; /* NOTREACHED */
10930 ctl_extent_check_lba(uint64_t lba1, uint64_t len1, uint64_t lba2, uint64_t len2)
10932 uint64_t endlba1, endlba2;
10934 endlba1 = lba1 + len1 - 1;
10935 endlba2 = lba2 + len2 - 1;
10937 if ((endlba1 < lba2)
10938 || (endlba2 < lba1))
10939 return (CTL_ACTION_PASS);
10941 return (CTL_ACTION_BLOCK);
10945 ctl_extent_check_unmap(union ctl_io *io, uint64_t lba2, uint64_t len2)
10947 struct ctl_ptr_len_flags *ptrlen;
10948 struct scsi_unmap_desc *buf, *end, *range;
10952 /* If not UNMAP -- go other way. */
10953 if (io->io_hdr.io_type != CTL_IO_SCSI ||
10954 io->scsiio.cdb[0] != UNMAP)
10955 return (CTL_ACTION_ERROR);
10957 /* If UNMAP without data -- block and wait for data. */
10958 ptrlen = (struct ctl_ptr_len_flags *)
10959 &io->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
10960 if ((io->io_hdr.flags & CTL_FLAG_ALLOCATED) == 0 ||
10961 ptrlen->ptr == NULL)
10962 return (CTL_ACTION_BLOCK);
10964 /* UNMAP with data -- check for collision. */
10965 buf = (struct scsi_unmap_desc *)ptrlen->ptr;
10966 end = buf + ptrlen->len / sizeof(*buf);
10967 for (range = buf; range < end; range++) {
10968 lba = scsi_8btou64(range->lba);
10969 len = scsi_4btoul(range->length);
10970 if ((lba < lba2 + len2) && (lba + len > lba2))
10971 return (CTL_ACTION_BLOCK);
10973 return (CTL_ACTION_PASS);
10977 ctl_extent_check(union ctl_io *io1, union ctl_io *io2)
10979 uint64_t lba1, lba2;
10980 uint64_t len1, len2;
10983 if (ctl_get_lba_len(io1, &lba1, &len1) != 0)
10984 return (CTL_ACTION_ERROR);
10986 retval = ctl_extent_check_unmap(io2, lba1, len1);
10987 if (retval != CTL_ACTION_ERROR)
10990 if (ctl_get_lba_len(io2, &lba2, &len2) != 0)
10991 return (CTL_ACTION_ERROR);
10993 return (ctl_extent_check_lba(lba1, len1, lba2, len2));
10997 ctl_check_for_blockage(struct ctl_lun *lun, union ctl_io *pending_io,
10998 union ctl_io *ooa_io)
11000 const struct ctl_cmd_entry *pending_entry, *ooa_entry;
11001 ctl_serialize_action *serialize_row;
11004 * The initiator attempted multiple untagged commands at the same
11005 * time. Can't do that.
11007 if ((pending_io->scsiio.tag_type == CTL_TAG_UNTAGGED)
11008 && (ooa_io->scsiio.tag_type == CTL_TAG_UNTAGGED)
11009 && ((pending_io->io_hdr.nexus.targ_port ==
11010 ooa_io->io_hdr.nexus.targ_port)
11011 && (pending_io->io_hdr.nexus.initid.id ==
11012 ooa_io->io_hdr.nexus.initid.id))
11013 && ((ooa_io->io_hdr.flags & CTL_FLAG_ABORT) == 0))
11014 return (CTL_ACTION_OVERLAP);
11017 * The initiator attempted to send multiple tagged commands with
11018 * the same ID. (It's fine if different initiators have the same
11021 * Even if all of those conditions are true, we don't kill the I/O
11022 * if the command ahead of us has been aborted. We won't end up
11023 * sending it to the FETD, and it's perfectly legal to resend a
11024 * command with the same tag number as long as the previous
11025 * instance of this tag number has been aborted somehow.
11027 if ((pending_io->scsiio.tag_type != CTL_TAG_UNTAGGED)
11028 && (ooa_io->scsiio.tag_type != CTL_TAG_UNTAGGED)
11029 && (pending_io->scsiio.tag_num == ooa_io->scsiio.tag_num)
11030 && ((pending_io->io_hdr.nexus.targ_port ==
11031 ooa_io->io_hdr.nexus.targ_port)
11032 && (pending_io->io_hdr.nexus.initid.id ==
11033 ooa_io->io_hdr.nexus.initid.id))
11034 && ((ooa_io->io_hdr.flags & CTL_FLAG_ABORT) == 0))
11035 return (CTL_ACTION_OVERLAP_TAG);
11038 * If we get a head of queue tag, SAM-3 says that we should
11039 * immediately execute it.
11041 * What happens if this command would normally block for some other
11042 * reason? e.g. a request sense with a head of queue tag
11043 * immediately after a write. Normally that would block, but this
11044 * will result in its getting executed immediately...
11046 * We currently return "pass" instead of "skip", so we'll end up
11047 * going through the rest of the queue to check for overlapped tags.
11049 * XXX KDM check for other types of blockage first??
11051 if (pending_io->scsiio.tag_type == CTL_TAG_HEAD_OF_QUEUE)
11052 return (CTL_ACTION_PASS);
11055 * Ordered tags have to block until all items ahead of them
11056 * have completed. If we get called with an ordered tag, we always
11057 * block, if something else is ahead of us in the queue.
11059 if (pending_io->scsiio.tag_type == CTL_TAG_ORDERED)
11060 return (CTL_ACTION_BLOCK);
11063 * Simple tags get blocked until all head of queue and ordered tags
11064 * ahead of them have completed. I'm lumping untagged commands in
11065 * with simple tags here. XXX KDM is that the right thing to do?
11067 if (((pending_io->scsiio.tag_type == CTL_TAG_UNTAGGED)
11068 || (pending_io->scsiio.tag_type == CTL_TAG_SIMPLE))
11069 && ((ooa_io->scsiio.tag_type == CTL_TAG_HEAD_OF_QUEUE)
11070 || (ooa_io->scsiio.tag_type == CTL_TAG_ORDERED)))
11071 return (CTL_ACTION_BLOCK);
11073 pending_entry = ctl_get_cmd_entry(&pending_io->scsiio, NULL);
11074 ooa_entry = ctl_get_cmd_entry(&ooa_io->scsiio, NULL);
11076 serialize_row = ctl_serialize_table[ooa_entry->seridx];
11078 switch (serialize_row[pending_entry->seridx]) {
11079 case CTL_SER_BLOCK:
11080 return (CTL_ACTION_BLOCK);
11081 case CTL_SER_EXTENT:
11082 return (ctl_extent_check(pending_io, ooa_io));
11083 case CTL_SER_EXTENTOPT:
11084 if ((lun->mode_pages.control_page[CTL_PAGE_CURRENT].queue_flags
11085 & SCP_QUEUE_ALG_MASK) != SCP_QUEUE_ALG_UNRESTRICTED)
11086 return (ctl_extent_check(pending_io, ooa_io));
11089 return (CTL_ACTION_PASS);
11090 case CTL_SER_BLOCKOPT:
11091 if ((lun->mode_pages.control_page[CTL_PAGE_CURRENT].queue_flags
11092 & SCP_QUEUE_ALG_MASK) != SCP_QUEUE_ALG_UNRESTRICTED)
11093 return (CTL_ACTION_BLOCK);
11094 return (CTL_ACTION_PASS);
11096 return (CTL_ACTION_SKIP);
11098 panic("invalid serialization value %d",
11099 serialize_row[pending_entry->seridx]);
11102 return (CTL_ACTION_ERROR);
11106 * Check for blockage or overlaps against the OOA (Order Of Arrival) queue.
11108 * - pending_io is generally either incoming, or on the blocked queue
11109 * - starting I/O is the I/O we want to start the check with.
11112 ctl_check_ooa(struct ctl_lun *lun, union ctl_io *pending_io,
11113 union ctl_io *starting_io)
11115 union ctl_io *ooa_io;
11118 mtx_assert(&lun->lun_lock, MA_OWNED);
11121 * Run back along the OOA queue, starting with the current
11122 * blocked I/O and going through every I/O before it on the
11123 * queue. If starting_io is NULL, we'll just end up returning
11126 for (ooa_io = starting_io; ooa_io != NULL;
11127 ooa_io = (union ctl_io *)TAILQ_PREV(&ooa_io->io_hdr, ctl_ooaq,
11131 * This routine just checks to see whether
11132 * cur_blocked is blocked by ooa_io, which is ahead
11133 * of it in the queue. It doesn't queue/dequeue
11136 action = ctl_check_for_blockage(lun, pending_io, ooa_io);
11138 case CTL_ACTION_BLOCK:
11139 case CTL_ACTION_OVERLAP:
11140 case CTL_ACTION_OVERLAP_TAG:
11141 case CTL_ACTION_SKIP:
11142 case CTL_ACTION_ERROR:
11144 break; /* NOTREACHED */
11145 case CTL_ACTION_PASS:
11148 panic("invalid action %d", action);
11149 break; /* NOTREACHED */
11153 return (CTL_ACTION_PASS);
11158 * - An I/O has just completed, and has been removed from the per-LUN OOA
11159 * queue, so some items on the blocked queue may now be unblocked.
11162 ctl_check_blocked(struct ctl_lun *lun)
11164 union ctl_io *cur_blocked, *next_blocked;
11166 mtx_assert(&lun->lun_lock, MA_OWNED);
11169 * Run forward from the head of the blocked queue, checking each
11170 * entry against the I/Os prior to it on the OOA queue to see if
11171 * there is still any blockage.
11173 * We cannot use the TAILQ_FOREACH() macro, because it can't deal
11174 * with our removing a variable on it while it is traversing the
11177 for (cur_blocked = (union ctl_io *)TAILQ_FIRST(&lun->blocked_queue);
11178 cur_blocked != NULL; cur_blocked = next_blocked) {
11179 union ctl_io *prev_ooa;
11182 next_blocked = (union ctl_io *)TAILQ_NEXT(&cur_blocked->io_hdr,
11185 prev_ooa = (union ctl_io *)TAILQ_PREV(&cur_blocked->io_hdr,
11186 ctl_ooaq, ooa_links);
11189 * If cur_blocked happens to be the first item in the OOA
11190 * queue now, prev_ooa will be NULL, and the action
11191 * returned will just be CTL_ACTION_PASS.
11193 action = ctl_check_ooa(lun, cur_blocked, prev_ooa);
11196 case CTL_ACTION_BLOCK:
11197 /* Nothing to do here, still blocked */
11199 case CTL_ACTION_OVERLAP:
11200 case CTL_ACTION_OVERLAP_TAG:
11202 * This shouldn't happen! In theory we've already
11203 * checked this command for overlap...
11206 case CTL_ACTION_PASS:
11207 case CTL_ACTION_SKIP: {
11208 struct ctl_softc *softc;
11209 const struct ctl_cmd_entry *entry;
11214 * The skip case shouldn't happen, this transaction
11215 * should have never made it onto the blocked queue.
11218 * This I/O is no longer blocked, we can remove it
11219 * from the blocked queue. Since this is a TAILQ
11220 * (doubly linked list), we can do O(1) removals
11221 * from any place on the list.
11223 TAILQ_REMOVE(&lun->blocked_queue, &cur_blocked->io_hdr,
11225 cur_blocked->io_hdr.flags &= ~CTL_FLAG_BLOCKED;
11227 if (cur_blocked->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC){
11229 * Need to send IO back to original side to
11232 union ctl_ha_msg msg_info;
11234 msg_info.hdr.original_sc =
11235 cur_blocked->io_hdr.original_sc;
11236 msg_info.hdr.serializing_sc = cur_blocked;
11237 msg_info.hdr.msg_type = CTL_MSG_R2R;
11238 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
11239 &msg_info, sizeof(msg_info), 0)) >
11240 CTL_HA_STATUS_SUCCESS) {
11241 printf("CTL:Check Blocked error from "
11242 "ctl_ha_msg_send %d\n",
11247 entry = ctl_get_cmd_entry(&cur_blocked->scsiio, NULL);
11248 softc = control_softc;
11250 initidx = ctl_get_initindex(&cur_blocked->io_hdr.nexus);
11253 * Check this I/O for LUN state changes that may
11254 * have happened while this command was blocked.
11255 * The LUN state may have been changed by a command
11256 * ahead of us in the queue, so we need to re-check
11257 * for any states that can be caused by SCSI
11260 if (ctl_scsiio_lun_check(softc, lun, entry,
11261 &cur_blocked->scsiio) == 0) {
11262 cur_blocked->io_hdr.flags |=
11263 CTL_FLAG_IS_WAS_ON_RTR;
11264 ctl_enqueue_rtr(cur_blocked);
11266 ctl_done(cur_blocked);
11271 * This probably shouldn't happen -- we shouldn't
11272 * get CTL_ACTION_ERROR, or anything else.
11278 return (CTL_RETVAL_COMPLETE);
11282 * This routine (with one exception) checks LUN flags that can be set by
11283 * commands ahead of us in the OOA queue. These flags have to be checked
11284 * when a command initially comes in, and when we pull a command off the
11285 * blocked queue and are preparing to execute it. The reason we have to
11286 * check these flags for commands on the blocked queue is that the LUN
11287 * state may have been changed by a command ahead of us while we're on the
11290 * Ordering is somewhat important with these checks, so please pay
11291 * careful attention to the placement of any new checks.
11294 ctl_scsiio_lun_check(struct ctl_softc *ctl_softc, struct ctl_lun *lun,
11295 const struct ctl_cmd_entry *entry, struct ctl_scsiio *ctsio)
11302 mtx_assert(&lun->lun_lock, MA_OWNED);
11305 * If this shelf is a secondary shelf controller, we have to reject
11306 * any media access commands.
11309 /* No longer needed for HA */
11310 if (((ctl_softc->flags & CTL_FLAG_MASTER_SHELF) == 0)
11311 && ((entry->flags & CTL_CMD_FLAG_OK_ON_SECONDARY) == 0)) {
11312 ctl_set_lun_standby(ctsio);
11319 * Check for a reservation conflict. If this command isn't allowed
11320 * even on reserved LUNs, and if this initiator isn't the one who
11321 * reserved us, reject the command with a reservation conflict.
11323 residx = ctl_get_resindex(&ctsio->io_hdr.nexus);
11324 if ((lun->flags & CTL_LUN_RESERVED)
11325 && ((entry->flags & CTL_CMD_FLAG_ALLOW_ON_RESV) == 0)) {
11326 if (lun->res_idx != residx) {
11327 ctsio->scsi_status = SCSI_STATUS_RESERV_CONFLICT;
11328 ctsio->io_hdr.status = CTL_SCSI_ERROR;
11334 if ((lun->flags & CTL_LUN_PR_RESERVED)
11335 && ((entry->flags & CTL_CMD_FLAG_ALLOW_ON_PR_RESV) == 0)) {
11337 * if we aren't registered or it's a res holder type
11338 * reservation and this isn't the res holder then set a
11340 * NOTE: Commands which might be allowed on write exclusive
11341 * type reservations are checked in the particular command
11342 * for a conflict. Read and SSU are the only ones.
11344 if (!lun->per_res[residx].registered
11345 || (residx != lun->pr_res_idx && lun->res_type < 4)) {
11346 ctsio->scsi_status = SCSI_STATUS_RESERV_CONFLICT;
11347 ctsio->io_hdr.status = CTL_SCSI_ERROR;
11354 if ((lun->flags & CTL_LUN_OFFLINE)
11355 && ((entry->flags & CTL_CMD_FLAG_OK_ON_OFFLINE) == 0)) {
11356 ctl_set_lun_not_ready(ctsio);
11362 * If the LUN is stopped, see if this particular command is allowed
11363 * for a stopped lun. Otherwise, reject it with 0x04,0x02.
11365 if ((lun->flags & CTL_LUN_STOPPED)
11366 && ((entry->flags & CTL_CMD_FLAG_OK_ON_STOPPED) == 0)) {
11367 /* "Logical unit not ready, initializing cmd. required" */
11368 ctl_set_lun_stopped(ctsio);
11373 if ((lun->flags & CTL_LUN_INOPERABLE)
11374 && ((entry->flags & CTL_CMD_FLAG_OK_ON_INOPERABLE) == 0)) {
11375 /* "Medium format corrupted" */
11376 ctl_set_medium_format_corrupted(ctsio);
11387 ctl_failover_io(union ctl_io *io, int have_lock)
11389 ctl_set_busy(&io->scsiio);
11396 struct ctl_lun *lun;
11397 struct ctl_softc *ctl_softc;
11398 union ctl_io *next_io, *pending_io;
11403 ctl_softc = control_softc;
11405 mtx_lock(&ctl_softc->ctl_lock);
11407 * Remove any cmds from the other SC from the rtr queue. These
11408 * will obviously only be for LUNs for which we're the primary.
11409 * We can't send status or get/send data for these commands.
11410 * Since they haven't been executed yet, we can just remove them.
11411 * We'll either abort them or delete them below, depending on
11412 * which HA mode we're in.
11415 mtx_lock(&ctl_softc->queue_lock);
11416 for (io = (union ctl_io *)STAILQ_FIRST(&ctl_softc->rtr_queue);
11417 io != NULL; io = next_io) {
11418 next_io = (union ctl_io *)STAILQ_NEXT(&io->io_hdr, links);
11419 if (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC)
11420 STAILQ_REMOVE(&ctl_softc->rtr_queue, &io->io_hdr,
11421 ctl_io_hdr, links);
11423 mtx_unlock(&ctl_softc->queue_lock);
11426 for (lun_idx=0; lun_idx < ctl_softc->num_luns; lun_idx++) {
11427 lun = ctl_softc->ctl_luns[lun_idx];
11432 * Processor LUNs are primary on both sides.
11433 * XXX will this always be true?
11435 if (lun->be_lun->lun_type == T_PROCESSOR)
11438 if ((lun->flags & CTL_LUN_PRIMARY_SC)
11439 && (ctl_softc->ha_mode == CTL_HA_MODE_SER_ONLY)) {
11440 printf("FAILOVER: primary lun %d\n", lun_idx);
11442 * Remove all commands from the other SC. First from the
11443 * blocked queue then from the ooa queue. Once we have
11444 * removed them. Call ctl_check_blocked to see if there
11445 * is anything that can run.
11447 for (io = (union ctl_io *)TAILQ_FIRST(
11448 &lun->blocked_queue); io != NULL; io = next_io) {
11450 next_io = (union ctl_io *)TAILQ_NEXT(
11451 &io->io_hdr, blocked_links);
11453 if (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC) {
11454 TAILQ_REMOVE(&lun->blocked_queue,
11455 &io->io_hdr,blocked_links);
11456 io->io_hdr.flags &= ~CTL_FLAG_BLOCKED;
11457 TAILQ_REMOVE(&lun->ooa_queue,
11458 &io->io_hdr, ooa_links);
11464 for (io = (union ctl_io *)TAILQ_FIRST(&lun->ooa_queue);
11465 io != NULL; io = next_io) {
11467 next_io = (union ctl_io *)TAILQ_NEXT(
11468 &io->io_hdr, ooa_links);
11470 if (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC) {
11472 TAILQ_REMOVE(&lun->ooa_queue,
11479 ctl_check_blocked(lun);
11480 } else if ((lun->flags & CTL_LUN_PRIMARY_SC)
11481 && (ctl_softc->ha_mode == CTL_HA_MODE_XFER)) {
11483 printf("FAILOVER: primary lun %d\n", lun_idx);
11485 * Abort all commands from the other SC. We can't
11486 * send status back for them now. These should get
11487 * cleaned up when they are completed or come out
11488 * for a datamove operation.
11490 for (io = (union ctl_io *)TAILQ_FIRST(&lun->ooa_queue);
11491 io != NULL; io = next_io) {
11492 next_io = (union ctl_io *)TAILQ_NEXT(
11493 &io->io_hdr, ooa_links);
11495 if (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC)
11496 io->io_hdr.flags |= CTL_FLAG_ABORT;
11498 } else if (((lun->flags & CTL_LUN_PRIMARY_SC) == 0)
11499 && (ctl_softc->ha_mode == CTL_HA_MODE_XFER)) {
11501 printf("FAILOVER: secondary lun %d\n", lun_idx);
11503 lun->flags |= CTL_LUN_PRIMARY_SC;
11506 * We send all I/O that was sent to this controller
11507 * and redirected to the other side back with
11508 * busy status, and have the initiator retry it.
11509 * Figuring out how much data has been transferred,
11510 * etc. and picking up where we left off would be
11513 * XXX KDM need to remove I/O from the blocked
11516 for (pending_io = (union ctl_io *)TAILQ_FIRST(
11517 &lun->ooa_queue); pending_io != NULL;
11518 pending_io = next_io) {
11520 next_io = (union ctl_io *)TAILQ_NEXT(
11521 &pending_io->io_hdr, ooa_links);
11523 pending_io->io_hdr.flags &=
11524 ~CTL_FLAG_SENT_2OTHER_SC;
11526 if (pending_io->io_hdr.flags &
11527 CTL_FLAG_IO_ACTIVE) {
11528 pending_io->io_hdr.flags |=
11531 ctl_set_busy(&pending_io->scsiio);
11532 ctl_done(pending_io);
11537 * Build Unit Attention
11539 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
11540 lun->pending_ua[i] |=
11541 CTL_UA_ASYM_ACC_CHANGE;
11543 } else if (((lun->flags & CTL_LUN_PRIMARY_SC) == 0)
11544 && (ctl_softc->ha_mode == CTL_HA_MODE_SER_ONLY)) {
11545 printf("FAILOVER: secondary lun %d\n", lun_idx);
11547 * if the first io on the OOA is not on the RtR queue
11550 lun->flags |= CTL_LUN_PRIMARY_SC;
11552 pending_io = (union ctl_io *)TAILQ_FIRST(
11554 if (pending_io==NULL) {
11555 printf("Nothing on OOA queue\n");
11559 pending_io->io_hdr.flags &= ~CTL_FLAG_SENT_2OTHER_SC;
11560 if ((pending_io->io_hdr.flags &
11561 CTL_FLAG_IS_WAS_ON_RTR) == 0) {
11562 pending_io->io_hdr.flags |=
11563 CTL_FLAG_IS_WAS_ON_RTR;
11564 ctl_enqueue_rtr(pending_io);
11569 printf("Tag 0x%04x is running\n",
11570 pending_io->scsiio.tag_num);
11574 next_io = (union ctl_io *)TAILQ_NEXT(
11575 &pending_io->io_hdr, ooa_links);
11576 for (pending_io=next_io; pending_io != NULL;
11577 pending_io = next_io) {
11578 pending_io->io_hdr.flags &=
11579 ~CTL_FLAG_SENT_2OTHER_SC;
11580 next_io = (union ctl_io *)TAILQ_NEXT(
11581 &pending_io->io_hdr, ooa_links);
11582 if (pending_io->io_hdr.flags &
11583 CTL_FLAG_IS_WAS_ON_RTR) {
11585 printf("Tag 0x%04x is running\n",
11586 pending_io->scsiio.tag_num);
11591 switch (ctl_check_ooa(lun, pending_io,
11592 (union ctl_io *)TAILQ_PREV(
11593 &pending_io->io_hdr, ctl_ooaq,
11596 case CTL_ACTION_BLOCK:
11597 TAILQ_INSERT_TAIL(&lun->blocked_queue,
11598 &pending_io->io_hdr,
11600 pending_io->io_hdr.flags |=
11603 case CTL_ACTION_PASS:
11604 case CTL_ACTION_SKIP:
11605 pending_io->io_hdr.flags |=
11606 CTL_FLAG_IS_WAS_ON_RTR;
11607 ctl_enqueue_rtr(pending_io);
11609 case CTL_ACTION_OVERLAP:
11610 ctl_set_overlapped_cmd(
11611 (struct ctl_scsiio *)pending_io);
11612 ctl_done(pending_io);
11614 case CTL_ACTION_OVERLAP_TAG:
11615 ctl_set_overlapped_tag(
11616 (struct ctl_scsiio *)pending_io,
11617 pending_io->scsiio.tag_num & 0xff);
11618 ctl_done(pending_io);
11620 case CTL_ACTION_ERROR:
11622 ctl_set_internal_failure(
11623 (struct ctl_scsiio *)pending_io,
11626 ctl_done(pending_io);
11632 * Build Unit Attention
11634 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
11635 lun->pending_ua[i] |=
11636 CTL_UA_ASYM_ACC_CHANGE;
11639 panic("Unhandled HA mode failover, LUN flags = %#x, "
11640 "ha_mode = #%x", lun->flags, ctl_softc->ha_mode);
11644 mtx_unlock(&ctl_softc->ctl_lock);
11648 ctl_scsiio_precheck(struct ctl_softc *ctl_softc, struct ctl_scsiio *ctsio)
11650 struct ctl_lun *lun;
11651 const struct ctl_cmd_entry *entry;
11652 uint32_t initidx, targ_lun;
11659 targ_lun = ctsio->io_hdr.nexus.targ_mapped_lun;
11660 if ((targ_lun < CTL_MAX_LUNS)
11661 && (ctl_softc->ctl_luns[targ_lun] != NULL)) {
11662 lun = ctl_softc->ctl_luns[targ_lun];
11664 * If the LUN is invalid, pretend that it doesn't exist.
11665 * It will go away as soon as all pending I/O has been
11668 if (lun->flags & CTL_LUN_DISABLED) {
11671 ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr = lun;
11672 ctsio->io_hdr.ctl_private[CTL_PRIV_BACKEND_LUN].ptr =
11674 if (lun->be_lun->lun_type == T_PROCESSOR) {
11675 ctsio->io_hdr.flags |= CTL_FLAG_CONTROL_DEV;
11679 * Every I/O goes into the OOA queue for a
11680 * particular LUN, and stays there until completion.
11682 mtx_lock(&lun->lun_lock);
11683 TAILQ_INSERT_TAIL(&lun->ooa_queue, &ctsio->io_hdr,
11687 ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr = NULL;
11688 ctsio->io_hdr.ctl_private[CTL_PRIV_BACKEND_LUN].ptr = NULL;
11691 /* Get command entry and return error if it is unsuppotyed. */
11692 entry = ctl_validate_command(ctsio);
11693 if (entry == NULL) {
11695 mtx_unlock(&lun->lun_lock);
11699 ctsio->io_hdr.flags &= ~CTL_FLAG_DATA_MASK;
11700 ctsio->io_hdr.flags |= entry->flags & CTL_FLAG_DATA_MASK;
11703 * Check to see whether we can send this command to LUNs that don't
11704 * exist. This should pretty much only be the case for inquiry
11705 * and request sense. Further checks, below, really require having
11706 * a LUN, so we can't really check the command anymore. Just put
11707 * it on the rtr queue.
11710 if (entry->flags & CTL_CMD_FLAG_OK_ON_ALL_LUNS) {
11711 ctsio->io_hdr.flags |= CTL_FLAG_IS_WAS_ON_RTR;
11712 ctl_enqueue_rtr((union ctl_io *)ctsio);
11716 ctl_set_unsupported_lun(ctsio);
11717 ctl_done((union ctl_io *)ctsio);
11718 CTL_DEBUG_PRINT(("ctl_scsiio_precheck: bailing out due to invalid LUN\n"));
11722 * Make sure we support this particular command on this LUN.
11723 * e.g., we don't support writes to the control LUN.
11725 if (!ctl_cmd_applicable(lun->be_lun->lun_type, entry)) {
11726 mtx_unlock(&lun->lun_lock);
11727 ctl_set_invalid_opcode(ctsio);
11728 ctl_done((union ctl_io *)ctsio);
11733 initidx = ctl_get_initindex(&ctsio->io_hdr.nexus);
11737 * If we've got a request sense, it'll clear the contingent
11738 * allegiance condition. Otherwise, if we have a CA condition for
11739 * this initiator, clear it, because it sent down a command other
11740 * than request sense.
11742 if ((ctsio->cdb[0] != REQUEST_SENSE)
11743 && (ctl_is_set(lun->have_ca, initidx)))
11744 ctl_clear_mask(lun->have_ca, initidx);
11748 * If the command has this flag set, it handles its own unit
11749 * attention reporting, we shouldn't do anything. Otherwise we
11750 * check for any pending unit attentions, and send them back to the
11751 * initiator. We only do this when a command initially comes in,
11752 * not when we pull it off the blocked queue.
11754 * According to SAM-3, section 5.3.2, the order that things get
11755 * presented back to the host is basically unit attentions caused
11756 * by some sort of reset event, busy status, reservation conflicts
11757 * or task set full, and finally any other status.
11759 * One issue here is that some of the unit attentions we report
11760 * don't fall into the "reset" category (e.g. "reported luns data
11761 * has changed"). So reporting it here, before the reservation
11762 * check, may be technically wrong. I guess the only thing to do
11763 * would be to check for and report the reset events here, and then
11764 * check for the other unit attention types after we check for a
11765 * reservation conflict.
11767 * XXX KDM need to fix this
11769 if ((entry->flags & CTL_CMD_FLAG_NO_SENSE) == 0) {
11770 ctl_ua_type ua_type;
11772 if (lun->pending_ua[initidx] != CTL_UA_NONE) {
11773 scsi_sense_data_type sense_format;
11776 sense_format = (lun->flags &
11777 CTL_LUN_SENSE_DESC) ? SSD_TYPE_DESC :
11780 sense_format = SSD_TYPE_FIXED;
11782 ua_type = ctl_build_ua(&lun->pending_ua[initidx],
11783 &ctsio->sense_data, sense_format);
11784 if (ua_type != CTL_UA_NONE) {
11785 ctsio->scsi_status = SCSI_STATUS_CHECK_COND;
11786 ctsio->io_hdr.status = CTL_SCSI_ERROR |
11788 ctsio->sense_len = SSD_FULL_SIZE;
11789 mtx_unlock(&lun->lun_lock);
11790 ctl_done((union ctl_io *)ctsio);
11797 if (ctl_scsiio_lun_check(ctl_softc, lun, entry, ctsio) != 0) {
11798 mtx_unlock(&lun->lun_lock);
11799 ctl_done((union ctl_io *)ctsio);
11804 * XXX CHD this is where we want to send IO to other side if
11805 * this LUN is secondary on this SC. We will need to make a copy
11806 * of the IO and flag the IO on this side as SENT_2OTHER and the flag
11807 * the copy we send as FROM_OTHER.
11808 * We also need to stuff the address of the original IO so we can
11809 * find it easily. Something similar will need be done on the other
11810 * side so when we are done we can find the copy.
11812 if ((lun->flags & CTL_LUN_PRIMARY_SC) == 0) {
11813 union ctl_ha_msg msg_info;
11816 ctsio->io_hdr.flags |= CTL_FLAG_SENT_2OTHER_SC;
11818 msg_info.hdr.msg_type = CTL_MSG_SERIALIZE;
11819 msg_info.hdr.original_sc = (union ctl_io *)ctsio;
11821 printf("1. ctsio %p\n", ctsio);
11823 msg_info.hdr.serializing_sc = NULL;
11824 msg_info.hdr.nexus = ctsio->io_hdr.nexus;
11825 msg_info.scsi.tag_num = ctsio->tag_num;
11826 msg_info.scsi.tag_type = ctsio->tag_type;
11827 memcpy(msg_info.scsi.cdb, ctsio->cdb, CTL_MAX_CDBLEN);
11829 ctsio->io_hdr.flags &= ~CTL_FLAG_IO_ACTIVE;
11831 if ((isc_retval=ctl_ha_msg_send(CTL_HA_CHAN_CTL,
11832 (void *)&msg_info, sizeof(msg_info), 0)) >
11833 CTL_HA_STATUS_SUCCESS) {
11834 printf("CTL:precheck, ctl_ha_msg_send returned %d\n",
11836 printf("CTL:opcode is %x\n", ctsio->cdb[0]);
11839 printf("CTL:Precheck sent msg, opcode is %x\n",opcode);
11844 * XXX KDM this I/O is off the incoming queue, but hasn't
11845 * been inserted on any other queue. We may need to come
11846 * up with a holding queue while we wait for serialization
11847 * so that we have an idea of what we're waiting for from
11850 mtx_unlock(&lun->lun_lock);
11854 switch (ctl_check_ooa(lun, (union ctl_io *)ctsio,
11855 (union ctl_io *)TAILQ_PREV(&ctsio->io_hdr,
11856 ctl_ooaq, ooa_links))) {
11857 case CTL_ACTION_BLOCK:
11858 ctsio->io_hdr.flags |= CTL_FLAG_BLOCKED;
11859 TAILQ_INSERT_TAIL(&lun->blocked_queue, &ctsio->io_hdr,
11861 mtx_unlock(&lun->lun_lock);
11863 case CTL_ACTION_PASS:
11864 case CTL_ACTION_SKIP:
11865 ctsio->io_hdr.flags |= CTL_FLAG_IS_WAS_ON_RTR;
11866 mtx_unlock(&lun->lun_lock);
11867 ctl_enqueue_rtr((union ctl_io *)ctsio);
11869 case CTL_ACTION_OVERLAP:
11870 mtx_unlock(&lun->lun_lock);
11871 ctl_set_overlapped_cmd(ctsio);
11872 ctl_done((union ctl_io *)ctsio);
11874 case CTL_ACTION_OVERLAP_TAG:
11875 mtx_unlock(&lun->lun_lock);
11876 ctl_set_overlapped_tag(ctsio, ctsio->tag_num & 0xff);
11877 ctl_done((union ctl_io *)ctsio);
11879 case CTL_ACTION_ERROR:
11881 mtx_unlock(&lun->lun_lock);
11882 ctl_set_internal_failure(ctsio,
11884 /*retry_count*/ 0);
11885 ctl_done((union ctl_io *)ctsio);
11891 const struct ctl_cmd_entry *
11892 ctl_get_cmd_entry(struct ctl_scsiio *ctsio, int *sa)
11894 const struct ctl_cmd_entry *entry;
11895 int service_action;
11897 entry = &ctl_cmd_table[ctsio->cdb[0]];
11899 *sa = ((entry->flags & CTL_CMD_FLAG_SA5) != 0);
11900 if (entry->flags & CTL_CMD_FLAG_SA5) {
11901 service_action = ctsio->cdb[1] & SERVICE_ACTION_MASK;
11902 entry = &((const struct ctl_cmd_entry *)
11903 entry->execute)[service_action];
11908 const struct ctl_cmd_entry *
11909 ctl_validate_command(struct ctl_scsiio *ctsio)
11911 const struct ctl_cmd_entry *entry;
11915 entry = ctl_get_cmd_entry(ctsio, &sa);
11916 if (entry->execute == NULL) {
11918 ctl_set_invalid_field(ctsio,
11925 ctl_set_invalid_opcode(ctsio);
11926 ctl_done((union ctl_io *)ctsio);
11929 KASSERT(entry->length > 0,
11930 ("Not defined length for command 0x%02x/0x%02x",
11931 ctsio->cdb[0], ctsio->cdb[1]));
11932 for (i = 1; i < entry->length; i++) {
11933 diff = ctsio->cdb[i] & ~entry->usage[i - 1];
11936 ctl_set_invalid_field(ctsio,
11941 /*bit*/ fls(diff) - 1);
11942 ctl_done((union ctl_io *)ctsio);
11949 ctl_cmd_applicable(uint8_t lun_type, const struct ctl_cmd_entry *entry)
11952 switch (lun_type) {
11954 if (((entry->flags & CTL_CMD_FLAG_OK_ON_PROC) == 0) &&
11955 ((entry->flags & CTL_CMD_FLAG_OK_ON_ALL_LUNS) == 0))
11959 if (((entry->flags & CTL_CMD_FLAG_OK_ON_SLUN) == 0) &&
11960 ((entry->flags & CTL_CMD_FLAG_OK_ON_ALL_LUNS) == 0))
11970 ctl_scsiio(struct ctl_scsiio *ctsio)
11973 const struct ctl_cmd_entry *entry;
11975 retval = CTL_RETVAL_COMPLETE;
11977 CTL_DEBUG_PRINT(("ctl_scsiio cdb[0]=%02X\n", ctsio->cdb[0]));
11979 entry = ctl_get_cmd_entry(ctsio, NULL);
11982 * If this I/O has been aborted, just send it straight to
11983 * ctl_done() without executing it.
11985 if (ctsio->io_hdr.flags & CTL_FLAG_ABORT) {
11986 ctl_done((union ctl_io *)ctsio);
11991 * All the checks should have been handled by ctl_scsiio_precheck().
11992 * We should be clear now to just execute the I/O.
11994 retval = entry->execute(ctsio);
12001 * Since we only implement one target right now, a bus reset simply resets
12002 * our single target.
12005 ctl_bus_reset(struct ctl_softc *ctl_softc, union ctl_io *io)
12007 return(ctl_target_reset(ctl_softc, io, CTL_UA_BUS_RESET));
12011 ctl_target_reset(struct ctl_softc *ctl_softc, union ctl_io *io,
12012 ctl_ua_type ua_type)
12014 struct ctl_lun *lun;
12017 if (!(io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC)) {
12018 union ctl_ha_msg msg_info;
12020 io->io_hdr.flags |= CTL_FLAG_SENT_2OTHER_SC;
12021 msg_info.hdr.nexus = io->io_hdr.nexus;
12022 if (ua_type==CTL_UA_TARG_RESET)
12023 msg_info.task.task_action = CTL_TASK_TARGET_RESET;
12025 msg_info.task.task_action = CTL_TASK_BUS_RESET;
12026 msg_info.hdr.msg_type = CTL_MSG_MANAGE_TASKS;
12027 msg_info.hdr.original_sc = NULL;
12028 msg_info.hdr.serializing_sc = NULL;
12029 if (CTL_HA_STATUS_SUCCESS != ctl_ha_msg_send(CTL_HA_CHAN_CTL,
12030 (void *)&msg_info, sizeof(msg_info), 0)) {
12035 mtx_lock(&ctl_softc->ctl_lock);
12036 STAILQ_FOREACH(lun, &ctl_softc->lun_list, links)
12037 retval += ctl_lun_reset(lun, io, ua_type);
12038 mtx_unlock(&ctl_softc->ctl_lock);
12044 * The LUN should always be set. The I/O is optional, and is used to
12045 * distinguish between I/Os sent by this initiator, and by other
12046 * initiators. We set unit attention for initiators other than this one.
12047 * SAM-3 is vague on this point. It does say that a unit attention should
12048 * be established for other initiators when a LUN is reset (see section
12049 * 5.7.3), but it doesn't specifically say that the unit attention should
12050 * be established for this particular initiator when a LUN is reset. Here
12051 * is the relevant text, from SAM-3 rev 8:
12053 * 5.7.2 When a SCSI initiator port aborts its own tasks
12055 * When a SCSI initiator port causes its own task(s) to be aborted, no
12056 * notification that the task(s) have been aborted shall be returned to
12057 * the SCSI initiator port other than the completion response for the
12058 * command or task management function action that caused the task(s) to
12059 * be aborted and notification(s) associated with related effects of the
12060 * action (e.g., a reset unit attention condition).
12062 * XXX KDM for now, we're setting unit attention for all initiators.
12065 ctl_lun_reset(struct ctl_lun *lun, union ctl_io *io, ctl_ua_type ua_type)
12069 uint32_t initindex;
12073 mtx_lock(&lun->lun_lock);
12075 * Run through the OOA queue and abort each I/O.
12078 TAILQ_FOREACH((struct ctl_io_hdr *)xio, &lun->ooa_queue, ooa_links) {
12080 for (xio = (union ctl_io *)TAILQ_FIRST(&lun->ooa_queue); xio != NULL;
12081 xio = (union ctl_io *)TAILQ_NEXT(&xio->io_hdr, ooa_links)) {
12082 xio->io_hdr.flags |= CTL_FLAG_ABORT | CTL_FLAG_ABORT_STATUS;
12086 * This version sets unit attention for every
12089 initindex = ctl_get_initindex(&io->io_hdr.nexus);
12090 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
12091 if (initindex == i)
12093 lun->pending_ua[i] |= ua_type;
12098 * A reset (any kind, really) clears reservations established with
12099 * RESERVE/RELEASE. It does not clear reservations established
12100 * with PERSISTENT RESERVE OUT, but we don't support that at the
12101 * moment anyway. See SPC-2, section 5.6. SPC-3 doesn't address
12102 * reservations made with the RESERVE/RELEASE commands, because
12103 * those commands are obsolete in SPC-3.
12105 lun->flags &= ~CTL_LUN_RESERVED;
12107 for (i = 0; i < CTL_MAX_INITIATORS; i++) {
12109 ctl_clear_mask(lun->have_ca, i);
12111 lun->pending_ua[i] |= ua_type;
12113 mtx_unlock(&lun->lun_lock);
12119 ctl_abort_tasks_lun(struct ctl_lun *lun, uint32_t targ_port, uint32_t init_id,
12124 mtx_assert(&lun->lun_lock, MA_OWNED);
12127 * Run through the OOA queue and attempt to find the given I/O.
12128 * The target port, initiator ID, tag type and tag number have to
12129 * match the values that we got from the initiator. If we have an
12130 * untagged command to abort, simply abort the first untagged command
12131 * we come to. We only allow one untagged command at a time of course.
12133 for (xio = (union ctl_io *)TAILQ_FIRST(&lun->ooa_queue); xio != NULL;
12134 xio = (union ctl_io *)TAILQ_NEXT(&xio->io_hdr, ooa_links)) {
12136 if ((targ_port == UINT32_MAX ||
12137 targ_port == xio->io_hdr.nexus.targ_port) &&
12138 (init_id == UINT32_MAX ||
12139 init_id == xio->io_hdr.nexus.initid.id)) {
12140 if (targ_port != xio->io_hdr.nexus.targ_port ||
12141 init_id != xio->io_hdr.nexus.initid.id)
12142 xio->io_hdr.flags |= CTL_FLAG_ABORT_STATUS;
12143 xio->io_hdr.flags |= CTL_FLAG_ABORT;
12144 if (!other_sc && !(lun->flags & CTL_LUN_PRIMARY_SC)) {
12145 union ctl_ha_msg msg_info;
12147 msg_info.hdr.nexus = xio->io_hdr.nexus;
12148 msg_info.task.task_action = CTL_TASK_ABORT_TASK;
12149 msg_info.task.tag_num = xio->scsiio.tag_num;
12150 msg_info.task.tag_type = xio->scsiio.tag_type;
12151 msg_info.hdr.msg_type = CTL_MSG_MANAGE_TASKS;
12152 msg_info.hdr.original_sc = NULL;
12153 msg_info.hdr.serializing_sc = NULL;
12154 ctl_ha_msg_send(CTL_HA_CHAN_CTL,
12155 (void *)&msg_info, sizeof(msg_info), 0);
12162 ctl_abort_task_set(union ctl_io *io)
12164 struct ctl_softc *softc = control_softc;
12165 struct ctl_lun *lun;
12171 targ_lun = io->io_hdr.nexus.targ_mapped_lun;
12172 mtx_lock(&softc->ctl_lock);
12173 if ((targ_lun < CTL_MAX_LUNS) && (softc->ctl_luns[targ_lun] != NULL))
12174 lun = softc->ctl_luns[targ_lun];
12176 mtx_unlock(&softc->ctl_lock);
12180 mtx_lock(&lun->lun_lock);
12181 mtx_unlock(&softc->ctl_lock);
12182 if (io->taskio.task_action == CTL_TASK_ABORT_TASK_SET) {
12183 ctl_abort_tasks_lun(lun, io->io_hdr.nexus.targ_port,
12184 io->io_hdr.nexus.initid.id,
12185 (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC) != 0);
12186 } else { /* CTL_TASK_CLEAR_TASK_SET */
12187 ctl_abort_tasks_lun(lun, UINT32_MAX, UINT32_MAX,
12188 (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC) != 0);
12190 mtx_unlock(&lun->lun_lock);
12195 ctl_i_t_nexus_reset(union ctl_io *io)
12197 struct ctl_softc *softc = control_softc;
12198 struct ctl_lun *lun;
12199 uint32_t initindex, residx;
12201 initindex = ctl_get_initindex(&io->io_hdr.nexus);
12202 residx = ctl_get_resindex(&io->io_hdr.nexus);
12203 mtx_lock(&softc->ctl_lock);
12204 STAILQ_FOREACH(lun, &softc->lun_list, links) {
12205 mtx_lock(&lun->lun_lock);
12206 ctl_abort_tasks_lun(lun, io->io_hdr.nexus.targ_port,
12207 io->io_hdr.nexus.initid.id,
12208 (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC) != 0);
12210 ctl_clear_mask(lun->have_ca, initindex);
12212 if ((lun->flags & CTL_LUN_RESERVED) && (lun->res_idx == residx))
12213 lun->flags &= ~CTL_LUN_RESERVED;
12214 lun->pending_ua[initindex] |= CTL_UA_I_T_NEXUS_LOSS;
12215 mtx_unlock(&lun->lun_lock);
12217 mtx_unlock(&softc->ctl_lock);
12222 ctl_abort_task(union ctl_io *io)
12225 struct ctl_lun *lun;
12226 struct ctl_softc *ctl_softc;
12229 char printbuf[128];
12234 ctl_softc = control_softc;
12240 targ_lun = io->io_hdr.nexus.targ_mapped_lun;
12241 mtx_lock(&ctl_softc->ctl_lock);
12242 if ((targ_lun < CTL_MAX_LUNS)
12243 && (ctl_softc->ctl_luns[targ_lun] != NULL))
12244 lun = ctl_softc->ctl_luns[targ_lun];
12246 mtx_unlock(&ctl_softc->ctl_lock);
12251 printf("ctl_abort_task: called for lun %lld, tag %d type %d\n",
12252 lun->lun, io->taskio.tag_num, io->taskio.tag_type);
12255 mtx_lock(&lun->lun_lock);
12256 mtx_unlock(&ctl_softc->ctl_lock);
12258 * Run through the OOA queue and attempt to find the given I/O.
12259 * The target port, initiator ID, tag type and tag number have to
12260 * match the values that we got from the initiator. If we have an
12261 * untagged command to abort, simply abort the first untagged command
12262 * we come to. We only allow one untagged command at a time of course.
12265 TAILQ_FOREACH((struct ctl_io_hdr *)xio, &lun->ooa_queue, ooa_links) {
12267 for (xio = (union ctl_io *)TAILQ_FIRST(&lun->ooa_queue); xio != NULL;
12268 xio = (union ctl_io *)TAILQ_NEXT(&xio->io_hdr, ooa_links)) {
12270 sbuf_new(&sb, printbuf, sizeof(printbuf), SBUF_FIXEDLEN);
12272 sbuf_printf(&sb, "LUN %lld tag %d type %d%s%s%s%s: ",
12273 lun->lun, xio->scsiio.tag_num,
12274 xio->scsiio.tag_type,
12275 (xio->io_hdr.blocked_links.tqe_prev
12276 == NULL) ? "" : " BLOCKED",
12277 (xio->io_hdr.flags &
12278 CTL_FLAG_DMA_INPROG) ? " DMA" : "",
12279 (xio->io_hdr.flags &
12280 CTL_FLAG_ABORT) ? " ABORT" : "",
12281 (xio->io_hdr.flags &
12282 CTL_FLAG_IS_WAS_ON_RTR ? " RTR" : ""));
12283 ctl_scsi_command_string(&xio->scsiio, NULL, &sb);
12285 printf("%s\n", sbuf_data(&sb));
12288 if ((xio->io_hdr.nexus.targ_port == io->io_hdr.nexus.targ_port)
12289 && (xio->io_hdr.nexus.initid.id ==
12290 io->io_hdr.nexus.initid.id)) {
12292 * If the abort says that the task is untagged, the
12293 * task in the queue must be untagged. Otherwise,
12294 * we just check to see whether the tag numbers
12295 * match. This is because the QLogic firmware
12296 * doesn't pass back the tag type in an abort
12300 if (((xio->scsiio.tag_type == CTL_TAG_UNTAGGED)
12301 && (io->taskio.tag_type == CTL_TAG_UNTAGGED))
12302 || (xio->scsiio.tag_num == io->taskio.tag_num)) {
12305 * XXX KDM we've got problems with FC, because it
12306 * doesn't send down a tag type with aborts. So we
12307 * can only really go by the tag number...
12308 * This may cause problems with parallel SCSI.
12309 * Need to figure that out!!
12311 if (xio->scsiio.tag_num == io->taskio.tag_num) {
12312 xio->io_hdr.flags |= CTL_FLAG_ABORT;
12314 if ((io->io_hdr.flags &
12315 CTL_FLAG_FROM_OTHER_SC) == 0 &&
12316 !(lun->flags & CTL_LUN_PRIMARY_SC)) {
12317 union ctl_ha_msg msg_info;
12319 io->io_hdr.flags |=
12320 CTL_FLAG_SENT_2OTHER_SC;
12321 msg_info.hdr.nexus = io->io_hdr.nexus;
12322 msg_info.task.task_action =
12323 CTL_TASK_ABORT_TASK;
12324 msg_info.task.tag_num =
12325 io->taskio.tag_num;
12326 msg_info.task.tag_type =
12327 io->taskio.tag_type;
12328 msg_info.hdr.msg_type =
12329 CTL_MSG_MANAGE_TASKS;
12330 msg_info.hdr.original_sc = NULL;
12331 msg_info.hdr.serializing_sc = NULL;
12333 printf("Sent Abort to other side\n");
12335 if (CTL_HA_STATUS_SUCCESS !=
12336 ctl_ha_msg_send(CTL_HA_CHAN_CTL,
12338 sizeof(msg_info), 0)) {
12342 printf("ctl_abort_task: found I/O to abort\n");
12348 mtx_unlock(&lun->lun_lock);
12352 * This isn't really an error. It's entirely possible for
12353 * the abort and command completion to cross on the wire.
12354 * This is more of an informative/diagnostic error.
12357 printf("ctl_abort_task: ABORT sent for nonexistent I/O: "
12358 "%d:%d:%d:%d tag %d type %d\n",
12359 io->io_hdr.nexus.initid.id,
12360 io->io_hdr.nexus.targ_port,
12361 io->io_hdr.nexus.targ_target.id,
12362 io->io_hdr.nexus.targ_lun, io->taskio.tag_num,
12363 io->taskio.tag_type);
12370 ctl_run_task(union ctl_io *io)
12372 struct ctl_softc *ctl_softc = control_softc;
12374 const char *task_desc;
12376 CTL_DEBUG_PRINT(("ctl_run_task\n"));
12378 KASSERT(io->io_hdr.io_type == CTL_IO_TASK,
12379 ("ctl_run_task: Unextected io_type %d\n",
12380 io->io_hdr.io_type));
12382 task_desc = ctl_scsi_task_string(&io->taskio);
12383 if (task_desc != NULL) {
12385 csevent_log(CSC_CTL | CSC_SHELF_SW |
12387 csevent_LogType_Trace,
12388 csevent_Severity_Information,
12389 csevent_AlertLevel_Green,
12390 csevent_FRU_Firmware,
12391 csevent_FRU_Unknown,
12392 "CTL: received task: %s",task_desc);
12396 csevent_log(CSC_CTL | CSC_SHELF_SW |
12398 csevent_LogType_Trace,
12399 csevent_Severity_Information,
12400 csevent_AlertLevel_Green,
12401 csevent_FRU_Firmware,
12402 csevent_FRU_Unknown,
12403 "CTL: received unknown task "
12405 io->taskio.task_action,
12406 io->taskio.task_action);
12409 switch (io->taskio.task_action) {
12410 case CTL_TASK_ABORT_TASK:
12411 retval = ctl_abort_task(io);
12413 case CTL_TASK_ABORT_TASK_SET:
12414 case CTL_TASK_CLEAR_TASK_SET:
12415 retval = ctl_abort_task_set(io);
12417 case CTL_TASK_CLEAR_ACA:
12419 case CTL_TASK_I_T_NEXUS_RESET:
12420 retval = ctl_i_t_nexus_reset(io);
12422 case CTL_TASK_LUN_RESET: {
12423 struct ctl_lun *lun;
12426 targ_lun = io->io_hdr.nexus.targ_mapped_lun;
12427 mtx_lock(&ctl_softc->ctl_lock);
12428 if ((targ_lun < CTL_MAX_LUNS)
12429 && (ctl_softc->ctl_luns[targ_lun] != NULL))
12430 lun = ctl_softc->ctl_luns[targ_lun];
12432 mtx_unlock(&ctl_softc->ctl_lock);
12437 if (!(io->io_hdr.flags &
12438 CTL_FLAG_FROM_OTHER_SC)) {
12439 union ctl_ha_msg msg_info;
12441 io->io_hdr.flags |=
12442 CTL_FLAG_SENT_2OTHER_SC;
12443 msg_info.hdr.msg_type =
12444 CTL_MSG_MANAGE_TASKS;
12445 msg_info.hdr.nexus = io->io_hdr.nexus;
12446 msg_info.task.task_action =
12447 CTL_TASK_LUN_RESET;
12448 msg_info.hdr.original_sc = NULL;
12449 msg_info.hdr.serializing_sc = NULL;
12450 if (CTL_HA_STATUS_SUCCESS !=
12451 ctl_ha_msg_send(CTL_HA_CHAN_CTL,
12453 sizeof(msg_info), 0)) {
12457 retval = ctl_lun_reset(lun, io,
12459 mtx_unlock(&ctl_softc->ctl_lock);
12462 case CTL_TASK_TARGET_RESET:
12463 retval = ctl_target_reset(ctl_softc, io, CTL_UA_TARG_RESET);
12465 case CTL_TASK_BUS_RESET:
12466 retval = ctl_bus_reset(ctl_softc, io);
12468 case CTL_TASK_PORT_LOGIN:
12470 case CTL_TASK_PORT_LOGOUT:
12473 printf("ctl_run_task: got unknown task management event %d\n",
12474 io->taskio.task_action);
12478 io->io_hdr.status = CTL_SUCCESS;
12480 io->io_hdr.status = CTL_ERROR;
12485 * For HA operation. Handle commands that come in from the other
12489 ctl_handle_isc(union ctl_io *io)
12492 struct ctl_lun *lun;
12493 struct ctl_softc *ctl_softc;
12496 ctl_softc = control_softc;
12498 targ_lun = io->io_hdr.nexus.targ_mapped_lun;
12499 lun = ctl_softc->ctl_luns[targ_lun];
12501 switch (io->io_hdr.msg_type) {
12502 case CTL_MSG_SERIALIZE:
12503 free_io = ctl_serialize_other_sc_cmd(&io->scsiio);
12505 case CTL_MSG_R2R: {
12506 const struct ctl_cmd_entry *entry;
12509 * This is only used in SER_ONLY mode.
12512 entry = ctl_get_cmd_entry(&io->scsiio, NULL);
12513 mtx_lock(&lun->lun_lock);
12514 if (ctl_scsiio_lun_check(ctl_softc, lun,
12515 entry, (struct ctl_scsiio *)io) != 0) {
12516 mtx_unlock(&lun->lun_lock);
12520 io->io_hdr.flags |= CTL_FLAG_IS_WAS_ON_RTR;
12521 mtx_unlock(&lun->lun_lock);
12522 ctl_enqueue_rtr(io);
12525 case CTL_MSG_FINISH_IO:
12526 if (ctl_softc->ha_mode == CTL_HA_MODE_XFER) {
12531 mtx_lock(&lun->lun_lock);
12532 TAILQ_REMOVE(&lun->ooa_queue, &io->io_hdr,
12534 ctl_check_blocked(lun);
12535 mtx_unlock(&lun->lun_lock);
12538 case CTL_MSG_PERS_ACTION:
12539 ctl_hndl_per_res_out_on_other_sc(
12540 (union ctl_ha_msg *)&io->presio.pr_msg);
12543 case CTL_MSG_BAD_JUJU:
12547 case CTL_MSG_DATAMOVE:
12548 /* Only used in XFER mode */
12550 ctl_datamove_remote(io);
12552 case CTL_MSG_DATAMOVE_DONE:
12553 /* Only used in XFER mode */
12555 io->scsiio.be_move_done(io);
12559 printf("%s: Invalid message type %d\n",
12560 __func__, io->io_hdr.msg_type);
12570 * Returns the match type in the case of a match, or CTL_LUN_PAT_NONE if
12571 * there is no match.
12573 static ctl_lun_error_pattern
12574 ctl_cmd_pattern_match(struct ctl_scsiio *ctsio, struct ctl_error_desc *desc)
12576 const struct ctl_cmd_entry *entry;
12577 ctl_lun_error_pattern filtered_pattern, pattern;
12579 pattern = desc->error_pattern;
12582 * XXX KDM we need more data passed into this function to match a
12583 * custom pattern, and we actually need to implement custom pattern
12586 if (pattern & CTL_LUN_PAT_CMD)
12587 return (CTL_LUN_PAT_CMD);
12589 if ((pattern & CTL_LUN_PAT_MASK) == CTL_LUN_PAT_ANY)
12590 return (CTL_LUN_PAT_ANY);
12592 entry = ctl_get_cmd_entry(ctsio, NULL);
12594 filtered_pattern = entry->pattern & pattern;
12597 * If the user requested specific flags in the pattern (e.g.
12598 * CTL_LUN_PAT_RANGE), make sure the command supports all of those
12601 * If the user did not specify any flags, it doesn't matter whether
12602 * or not the command supports the flags.
12604 if ((filtered_pattern & ~CTL_LUN_PAT_MASK) !=
12605 (pattern & ~CTL_LUN_PAT_MASK))
12606 return (CTL_LUN_PAT_NONE);
12609 * If the user asked for a range check, see if the requested LBA
12610 * range overlaps with this command's LBA range.
12612 if (filtered_pattern & CTL_LUN_PAT_RANGE) {
12618 retval = ctl_get_lba_len((union ctl_io *)ctsio, &lba1, &len1);
12620 return (CTL_LUN_PAT_NONE);
12622 action = ctl_extent_check_lba(lba1, len1, desc->lba_range.lba,
12623 desc->lba_range.len);
12625 * A "pass" means that the LBA ranges don't overlap, so
12626 * this doesn't match the user's range criteria.
12628 if (action == CTL_ACTION_PASS)
12629 return (CTL_LUN_PAT_NONE);
12632 return (filtered_pattern);
12636 ctl_inject_error(struct ctl_lun *lun, union ctl_io *io)
12638 struct ctl_error_desc *desc, *desc2;
12640 mtx_assert(&lun->lun_lock, MA_OWNED);
12642 STAILQ_FOREACH_SAFE(desc, &lun->error_list, links, desc2) {
12643 ctl_lun_error_pattern pattern;
12645 * Check to see whether this particular command matches
12646 * the pattern in the descriptor.
12648 pattern = ctl_cmd_pattern_match(&io->scsiio, desc);
12649 if ((pattern & CTL_LUN_PAT_MASK) == CTL_LUN_PAT_NONE)
12652 switch (desc->lun_error & CTL_LUN_INJ_TYPE) {
12653 case CTL_LUN_INJ_ABORTED:
12654 ctl_set_aborted(&io->scsiio);
12656 case CTL_LUN_INJ_MEDIUM_ERR:
12657 ctl_set_medium_error(&io->scsiio);
12659 case CTL_LUN_INJ_UA:
12660 /* 29h/00h POWER ON, RESET, OR BUS DEVICE RESET
12662 ctl_set_ua(&io->scsiio, 0x29, 0x00);
12664 case CTL_LUN_INJ_CUSTOM:
12666 * We're assuming the user knows what he is doing.
12667 * Just copy the sense information without doing
12670 bcopy(&desc->custom_sense, &io->scsiio.sense_data,
12671 ctl_min(sizeof(desc->custom_sense),
12672 sizeof(io->scsiio.sense_data)));
12673 io->scsiio.scsi_status = SCSI_STATUS_CHECK_COND;
12674 io->scsiio.sense_len = SSD_FULL_SIZE;
12675 io->io_hdr.status = CTL_SCSI_ERROR | CTL_AUTOSENSE;
12677 case CTL_LUN_INJ_NONE:
12680 * If this is an error injection type we don't know
12681 * about, clear the continuous flag (if it is set)
12682 * so it will get deleted below.
12684 desc->lun_error &= ~CTL_LUN_INJ_CONTINUOUS;
12688 * By default, each error injection action is a one-shot
12690 if (desc->lun_error & CTL_LUN_INJ_CONTINUOUS)
12693 STAILQ_REMOVE(&lun->error_list, desc, ctl_error_desc, links);
12699 #ifdef CTL_IO_DELAY
12701 ctl_datamove_timer_wakeup(void *arg)
12705 io = (union ctl_io *)arg;
12709 #endif /* CTL_IO_DELAY */
12712 ctl_datamove(union ctl_io *io)
12714 void (*fe_datamove)(union ctl_io *io);
12716 mtx_assert(&control_softc->ctl_lock, MA_NOTOWNED);
12718 CTL_DEBUG_PRINT(("ctl_datamove\n"));
12721 if ((time_uptime - io->io_hdr.start_time) > ctl_time_io_secs) {
12726 ctl_scsi_path_string(io, path_str, sizeof(path_str));
12727 sbuf_new(&sb, str, sizeof(str), SBUF_FIXEDLEN);
12729 sbuf_cat(&sb, path_str);
12730 switch (io->io_hdr.io_type) {
12732 ctl_scsi_command_string(&io->scsiio, NULL, &sb);
12733 sbuf_printf(&sb, "\n");
12734 sbuf_cat(&sb, path_str);
12735 sbuf_printf(&sb, "Tag: 0x%04x, type %d\n",
12736 io->scsiio.tag_num, io->scsiio.tag_type);
12739 sbuf_printf(&sb, "Task I/O type: %d, Tag: 0x%04x, "
12740 "Tag Type: %d\n", io->taskio.task_action,
12741 io->taskio.tag_num, io->taskio.tag_type);
12744 printf("Invalid CTL I/O type %d\n", io->io_hdr.io_type);
12745 panic("Invalid CTL I/O type %d\n", io->io_hdr.io_type);
12748 sbuf_cat(&sb, path_str);
12749 sbuf_printf(&sb, "ctl_datamove: %jd seconds\n",
12750 (intmax_t)time_uptime - io->io_hdr.start_time);
12752 printf("%s", sbuf_data(&sb));
12754 #endif /* CTL_TIME_IO */
12756 #ifdef CTL_IO_DELAY
12757 if (io->io_hdr.flags & CTL_FLAG_DELAY_DONE) {
12758 struct ctl_lun *lun;
12760 lun =(struct ctl_lun *)io->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
12762 io->io_hdr.flags &= ~CTL_FLAG_DELAY_DONE;
12764 struct ctl_lun *lun;
12766 lun =(struct ctl_lun *)io->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
12768 && (lun->delay_info.datamove_delay > 0)) {
12769 struct callout *callout;
12771 callout = (struct callout *)&io->io_hdr.timer_bytes;
12772 callout_init(callout, /*mpsafe*/ 1);
12773 io->io_hdr.flags |= CTL_FLAG_DELAY_DONE;
12774 callout_reset(callout,
12775 lun->delay_info.datamove_delay * hz,
12776 ctl_datamove_timer_wakeup, io);
12777 if (lun->delay_info.datamove_type ==
12778 CTL_DELAY_TYPE_ONESHOT)
12779 lun->delay_info.datamove_delay = 0;
12786 * This command has been aborted. Set the port status, so we fail
12789 if (io->io_hdr.flags & CTL_FLAG_ABORT) {
12790 printf("ctl_datamove: tag 0x%04x on (%ju:%d:%ju:%d) aborted\n",
12791 io->scsiio.tag_num,(uintmax_t)io->io_hdr.nexus.initid.id,
12792 io->io_hdr.nexus.targ_port,
12793 (uintmax_t)io->io_hdr.nexus.targ_target.id,
12794 io->io_hdr.nexus.targ_lun);
12795 io->io_hdr.port_status = 31337;
12797 * Note that the backend, in this case, will get the
12798 * callback in its context. In other cases it may get
12799 * called in the frontend's interrupt thread context.
12801 io->scsiio.be_move_done(io);
12806 * If we're in XFER mode and this I/O is from the other shelf
12807 * controller, we need to send the DMA to the other side to
12808 * actually transfer the data to/from the host. In serialize only
12809 * mode the transfer happens below CTL and ctl_datamove() is only
12810 * called on the machine that originally received the I/O.
12812 if ((control_softc->ha_mode == CTL_HA_MODE_XFER)
12813 && (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC)) {
12814 union ctl_ha_msg msg;
12815 uint32_t sg_entries_sent;
12819 memset(&msg, 0, sizeof(msg));
12820 msg.hdr.msg_type = CTL_MSG_DATAMOVE;
12821 msg.hdr.original_sc = io->io_hdr.original_sc;
12822 msg.hdr.serializing_sc = io;
12823 msg.hdr.nexus = io->io_hdr.nexus;
12824 msg.dt.flags = io->io_hdr.flags;
12826 * We convert everything into a S/G list here. We can't
12827 * pass by reference, only by value between controllers.
12828 * So we can't pass a pointer to the S/G list, only as many
12829 * S/G entries as we can fit in here. If it's possible for
12830 * us to get more than CTL_HA_MAX_SG_ENTRIES S/G entries,
12831 * then we need to break this up into multiple transfers.
12833 if (io->scsiio.kern_sg_entries == 0) {
12834 msg.dt.kern_sg_entries = 1;
12836 * If this is in cached memory, flush the cache
12837 * before we send the DMA request to the other
12838 * controller. We want to do this in either the
12839 * read or the write case. The read case is
12840 * straightforward. In the write case, we want to
12841 * make sure nothing is in the local cache that
12842 * could overwrite the DMAed data.
12844 if ((io->io_hdr.flags & CTL_FLAG_NO_DATASYNC) == 0) {
12846 * XXX KDM use bus_dmamap_sync() here.
12851 * Convert to a physical address if this is a
12854 if (io->io_hdr.flags & CTL_FLAG_BUS_ADDR) {
12855 msg.dt.sg_list[0].addr =
12856 io->scsiio.kern_data_ptr;
12859 * XXX KDM use busdma here!
12862 msg.dt.sg_list[0].addr = (void *)
12863 vtophys(io->scsiio.kern_data_ptr);
12867 msg.dt.sg_list[0].len = io->scsiio.kern_data_len;
12870 struct ctl_sg_entry *sgl;
12873 msg.dt.kern_sg_entries = io->scsiio.kern_sg_entries;
12874 sgl = (struct ctl_sg_entry *)io->scsiio.kern_data_ptr;
12875 if ((io->io_hdr.flags & CTL_FLAG_NO_DATASYNC) == 0) {
12877 * XXX KDM use bus_dmamap_sync() here.
12882 msg.dt.kern_data_len = io->scsiio.kern_data_len;
12883 msg.dt.kern_total_len = io->scsiio.kern_total_len;
12884 msg.dt.kern_data_resid = io->scsiio.kern_data_resid;
12885 msg.dt.kern_rel_offset = io->scsiio.kern_rel_offset;
12886 msg.dt.sg_sequence = 0;
12889 * Loop until we've sent all of the S/G entries. On the
12890 * other end, we'll recompose these S/G entries into one
12891 * contiguous list before passing it to the
12893 for (sg_entries_sent = 0; sg_entries_sent <
12894 msg.dt.kern_sg_entries; msg.dt.sg_sequence++) {
12895 msg.dt.cur_sg_entries = ctl_min((sizeof(msg.dt.sg_list)/
12896 sizeof(msg.dt.sg_list[0])),
12897 msg.dt.kern_sg_entries - sg_entries_sent);
12899 if (do_sg_copy != 0) {
12900 struct ctl_sg_entry *sgl;
12903 sgl = (struct ctl_sg_entry *)
12904 io->scsiio.kern_data_ptr;
12906 * If this is in cached memory, flush the cache
12907 * before we send the DMA request to the other
12908 * controller. We want to do this in either
12909 * the * read or the write case. The read
12910 * case is straightforward. In the write
12911 * case, we want to make sure nothing is
12912 * in the local cache that could overwrite
12916 for (i = sg_entries_sent, j = 0;
12917 i < msg.dt.cur_sg_entries; i++, j++) {
12918 if ((io->io_hdr.flags &
12919 CTL_FLAG_NO_DATASYNC) == 0) {
12921 * XXX KDM use bus_dmamap_sync()
12924 if ((io->io_hdr.flags &
12925 CTL_FLAG_BUS_ADDR) == 0) {
12927 * XXX KDM use busdma.
12930 msg.dt.sg_list[j].addr =(void *)
12931 vtophys(sgl[i].addr);
12934 msg.dt.sg_list[j].addr =
12937 msg.dt.sg_list[j].len = sgl[i].len;
12941 sg_entries_sent += msg.dt.cur_sg_entries;
12942 if (sg_entries_sent >= msg.dt.kern_sg_entries)
12943 msg.dt.sg_last = 1;
12945 msg.dt.sg_last = 0;
12948 * XXX KDM drop and reacquire the lock here?
12950 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg,
12951 sizeof(msg), 0) > CTL_HA_STATUS_SUCCESS) {
12953 * XXX do something here.
12957 msg.dt.sent_sg_entries = sg_entries_sent;
12959 io->io_hdr.flags &= ~CTL_FLAG_IO_ACTIVE;
12960 if (io->io_hdr.flags & CTL_FLAG_FAILOVER)
12961 ctl_failover_io(io, /*have_lock*/ 0);
12966 * Lookup the fe_datamove() function for this particular
12970 control_softc->ctl_ports[ctl_port_idx(io->io_hdr.nexus.targ_port)]->fe_datamove;
12977 ctl_send_datamove_done(union ctl_io *io, int have_lock)
12979 union ctl_ha_msg msg;
12982 memset(&msg, 0, sizeof(msg));
12984 msg.hdr.msg_type = CTL_MSG_DATAMOVE_DONE;
12985 msg.hdr.original_sc = io;
12986 msg.hdr.serializing_sc = io->io_hdr.serializing_sc;
12987 msg.hdr.nexus = io->io_hdr.nexus;
12988 msg.hdr.status = io->io_hdr.status;
12989 msg.scsi.tag_num = io->scsiio.tag_num;
12990 msg.scsi.tag_type = io->scsiio.tag_type;
12991 msg.scsi.scsi_status = io->scsiio.scsi_status;
12992 memcpy(&msg.scsi.sense_data, &io->scsiio.sense_data,
12993 sizeof(io->scsiio.sense_data));
12994 msg.scsi.sense_len = io->scsiio.sense_len;
12995 msg.scsi.sense_residual = io->scsiio.sense_residual;
12996 msg.scsi.fetd_status = io->io_hdr.port_status;
12997 msg.scsi.residual = io->scsiio.residual;
12998 io->io_hdr.flags &= ~CTL_FLAG_IO_ACTIVE;
13000 if (io->io_hdr.flags & CTL_FLAG_FAILOVER) {
13001 ctl_failover_io(io, /*have_lock*/ have_lock);
13005 isc_status = ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg, sizeof(msg), 0);
13006 if (isc_status > CTL_HA_STATUS_SUCCESS) {
13007 /* XXX do something if this fails */
13013 * The DMA to the remote side is done, now we need to tell the other side
13014 * we're done so it can continue with its data movement.
13017 ctl_datamove_remote_write_cb(struct ctl_ha_dt_req *rq)
13023 if (rq->ret != CTL_HA_STATUS_SUCCESS) {
13024 printf("%s: ISC DMA write failed with error %d", __func__,
13026 ctl_set_internal_failure(&io->scsiio,
13028 /*retry_count*/ rq->ret);
13031 ctl_dt_req_free(rq);
13034 * In this case, we had to malloc the memory locally. Free it.
13036 if ((io->io_hdr.flags & CTL_FLAG_AUTO_MIRROR) == 0) {
13038 for (i = 0; i < io->scsiio.kern_sg_entries; i++)
13039 free(io->io_hdr.local_sglist[i].addr, M_CTL);
13042 * The data is in local and remote memory, so now we need to send
13043 * status (good or back) back to the other side.
13045 ctl_send_datamove_done(io, /*have_lock*/ 0);
13049 * We've moved the data from the host/controller into local memory. Now we
13050 * need to push it over to the remote controller's memory.
13053 ctl_datamove_remote_dm_write_cb(union ctl_io *io)
13059 retval = ctl_datamove_remote_xfer(io, CTL_HA_DT_CMD_WRITE,
13060 ctl_datamove_remote_write_cb);
13066 ctl_datamove_remote_write(union ctl_io *io)
13069 void (*fe_datamove)(union ctl_io *io);
13072 * - Get the data from the host/HBA into local memory.
13073 * - DMA memory from the local controller to the remote controller.
13074 * - Send status back to the remote controller.
13077 retval = ctl_datamove_remote_sgl_setup(io);
13081 /* Switch the pointer over so the FETD knows what to do */
13082 io->scsiio.kern_data_ptr = (uint8_t *)io->io_hdr.local_sglist;
13085 * Use a custom move done callback, since we need to send completion
13086 * back to the other controller, not to the backend on this side.
13088 io->scsiio.be_move_done = ctl_datamove_remote_dm_write_cb;
13090 fe_datamove = control_softc->ctl_ports[ctl_port_idx(io->io_hdr.nexus.targ_port)]->fe_datamove;
13099 ctl_datamove_remote_dm_read_cb(union ctl_io *io)
13108 * In this case, we had to malloc the memory locally. Free it.
13110 if ((io->io_hdr.flags & CTL_FLAG_AUTO_MIRROR) == 0) {
13112 for (i = 0; i < io->scsiio.kern_sg_entries; i++)
13113 free(io->io_hdr.local_sglist[i].addr, M_CTL);
13117 scsi_path_string(io, path_str, sizeof(path_str));
13118 sbuf_new(&sb, str, sizeof(str), SBUF_FIXEDLEN);
13119 sbuf_cat(&sb, path_str);
13120 scsi_command_string(&io->scsiio, NULL, &sb);
13121 sbuf_printf(&sb, "\n");
13122 sbuf_cat(&sb, path_str);
13123 sbuf_printf(&sb, "Tag: 0x%04x, type %d\n",
13124 io->scsiio.tag_num, io->scsiio.tag_type);
13125 sbuf_cat(&sb, path_str);
13126 sbuf_printf(&sb, "%s: flags %#x, status %#x\n", __func__,
13127 io->io_hdr.flags, io->io_hdr.status);
13129 printk("%s", sbuf_data(&sb));
13134 * The read is done, now we need to send status (good or bad) back
13135 * to the other side.
13137 ctl_send_datamove_done(io, /*have_lock*/ 0);
13143 ctl_datamove_remote_read_cb(struct ctl_ha_dt_req *rq)
13146 void (*fe_datamove)(union ctl_io *io);
13150 if (rq->ret != CTL_HA_STATUS_SUCCESS) {
13151 printf("%s: ISC DMA read failed with error %d", __func__,
13153 ctl_set_internal_failure(&io->scsiio,
13155 /*retry_count*/ rq->ret);
13158 ctl_dt_req_free(rq);
13160 /* Switch the pointer over so the FETD knows what to do */
13161 io->scsiio.kern_data_ptr = (uint8_t *)io->io_hdr.local_sglist;
13164 * Use a custom move done callback, since we need to send completion
13165 * back to the other controller, not to the backend on this side.
13167 io->scsiio.be_move_done = ctl_datamove_remote_dm_read_cb;
13169 /* XXX KDM add checks like the ones in ctl_datamove? */
13171 fe_datamove = control_softc->ctl_ports[ctl_port_idx(io->io_hdr.nexus.targ_port)]->fe_datamove;
13177 ctl_datamove_remote_sgl_setup(union ctl_io *io)
13179 struct ctl_sg_entry *local_sglist, *remote_sglist;
13180 struct ctl_sg_entry *local_dma_sglist, *remote_dma_sglist;
13181 struct ctl_softc *softc;
13186 softc = control_softc;
13188 local_sglist = io->io_hdr.local_sglist;
13189 local_dma_sglist = io->io_hdr.local_dma_sglist;
13190 remote_sglist = io->io_hdr.remote_sglist;
13191 remote_dma_sglist = io->io_hdr.remote_dma_sglist;
13193 if (io->io_hdr.flags & CTL_FLAG_AUTO_MIRROR) {
13194 for (i = 0; i < io->scsiio.kern_sg_entries; i++) {
13195 local_sglist[i].len = remote_sglist[i].len;
13198 * XXX Detect the situation where the RS-level I/O
13199 * redirector on the other side has already read the
13200 * data off of the AOR RS on this side, and
13201 * transferred it to remote (mirror) memory on the
13202 * other side. Since we already have the data in
13203 * memory here, we just need to use it.
13205 * XXX KDM this can probably be removed once we
13206 * get the cache device code in and take the
13207 * current AOR implementation out.
13210 if ((remote_sglist[i].addr >=
13211 (void *)vtophys(softc->mirr->addr))
13212 && (remote_sglist[i].addr <
13213 ((void *)vtophys(softc->mirr->addr) +
13214 CacheMirrorOffset))) {
13215 local_sglist[i].addr = remote_sglist[i].addr -
13217 if ((io->io_hdr.flags & CTL_FLAG_DATA_MASK) ==
13219 io->io_hdr.flags |= CTL_FLAG_REDIR_DONE;
13221 local_sglist[i].addr = remote_sglist[i].addr +
13226 printf("%s: local %p, remote %p, len %d\n",
13227 __func__, local_sglist[i].addr,
13228 remote_sglist[i].addr, local_sglist[i].len);
13232 uint32_t len_to_go;
13235 * In this case, we don't have automatically allocated
13236 * memory for this I/O on this controller. This typically
13237 * happens with internal CTL I/O -- e.g. inquiry, mode
13238 * sense, etc. Anything coming from RAIDCore will have
13239 * a mirror area available.
13241 len_to_go = io->scsiio.kern_data_len;
13244 * Clear the no datasync flag, we have to use malloced
13247 io->io_hdr.flags &= ~CTL_FLAG_NO_DATASYNC;
13250 * The difficult thing here is that the size of the various
13251 * S/G segments may be different than the size from the
13252 * remote controller. That'll make it harder when DMAing
13253 * the data back to the other side.
13255 for (i = 0; (i < sizeof(io->io_hdr.remote_sglist) /
13256 sizeof(io->io_hdr.remote_sglist[0])) &&
13257 (len_to_go > 0); i++) {
13258 local_sglist[i].len = ctl_min(len_to_go, 131072);
13259 CTL_SIZE_8B(local_dma_sglist[i].len,
13260 local_sglist[i].len);
13261 local_sglist[i].addr =
13262 malloc(local_dma_sglist[i].len, M_CTL,M_WAITOK);
13264 local_dma_sglist[i].addr = local_sglist[i].addr;
13266 if (local_sglist[i].addr == NULL) {
13269 printf("malloc failed for %zd bytes!",
13270 local_dma_sglist[i].len);
13271 for (j = 0; j < i; j++) {
13272 free(local_sglist[j].addr, M_CTL);
13274 ctl_set_internal_failure(&io->scsiio,
13276 /*retry_count*/ 4857);
13278 goto bailout_error;
13281 /* XXX KDM do we need a sync here? */
13283 len_to_go -= local_sglist[i].len;
13286 * Reset the number of S/G entries accordingly. The
13287 * original number of S/G entries is available in
13290 io->scsiio.kern_sg_entries = i;
13293 printf("%s: kern_sg_entries = %d\n", __func__,
13294 io->scsiio.kern_sg_entries);
13295 for (i = 0; i < io->scsiio.kern_sg_entries; i++)
13296 printf("%s: sg[%d] = %p, %d (DMA: %d)\n", __func__, i,
13297 local_sglist[i].addr, local_sglist[i].len,
13298 local_dma_sglist[i].len);
13307 ctl_send_datamove_done(io, /*have_lock*/ 0);
13313 ctl_datamove_remote_xfer(union ctl_io *io, unsigned command,
13314 ctl_ha_dt_cb callback)
13316 struct ctl_ha_dt_req *rq;
13317 struct ctl_sg_entry *remote_sglist, *local_sglist;
13318 struct ctl_sg_entry *remote_dma_sglist, *local_dma_sglist;
13319 uint32_t local_used, remote_used, total_used;
13325 rq = ctl_dt_req_alloc();
13328 * If we failed to allocate the request, and if the DMA didn't fail
13329 * anyway, set busy status. This is just a resource allocation
13333 && ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_STATUS_NONE))
13334 ctl_set_busy(&io->scsiio);
13336 if ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_STATUS_NONE) {
13339 ctl_dt_req_free(rq);
13342 * The data move failed. We need to return status back
13343 * to the other controller. No point in trying to DMA
13344 * data to the remote controller.
13347 ctl_send_datamove_done(io, /*have_lock*/ 0);
13354 local_sglist = io->io_hdr.local_sglist;
13355 local_dma_sglist = io->io_hdr.local_dma_sglist;
13356 remote_sglist = io->io_hdr.remote_sglist;
13357 remote_dma_sglist = io->io_hdr.remote_dma_sglist;
13362 if (io->io_hdr.flags & CTL_FLAG_REDIR_DONE) {
13363 rq->ret = CTL_HA_STATUS_SUCCESS;
13370 * Pull/push the data over the wire from/to the other controller.
13371 * This takes into account the possibility that the local and
13372 * remote sglists may not be identical in terms of the size of
13373 * the elements and the number of elements.
13375 * One fundamental assumption here is that the length allocated for
13376 * both the local and remote sglists is identical. Otherwise, we've
13377 * essentially got a coding error of some sort.
13379 for (i = 0, j = 0; total_used < io->scsiio.kern_data_len; ) {
13381 uint32_t cur_len, dma_length;
13384 rq->id = CTL_HA_DATA_CTL;
13385 rq->command = command;
13389 * Both pointers should be aligned. But it is possible
13390 * that the allocation length is not. They should both
13391 * also have enough slack left over at the end, though,
13392 * to round up to the next 8 byte boundary.
13394 cur_len = ctl_min(local_sglist[i].len - local_used,
13395 remote_sglist[j].len - remote_used);
13398 * In this case, we have a size issue and need to decrease
13399 * the size, except in the case where we actually have less
13400 * than 8 bytes left. In that case, we need to increase
13401 * the DMA length to get the last bit.
13403 if ((cur_len & 0x7) != 0) {
13404 if (cur_len > 0x7) {
13405 cur_len = cur_len - (cur_len & 0x7);
13406 dma_length = cur_len;
13408 CTL_SIZE_8B(dma_length, cur_len);
13412 dma_length = cur_len;
13415 * If we had to allocate memory for this I/O, instead of using
13416 * the non-cached mirror memory, we'll need to flush the cache
13417 * before trying to DMA to the other controller.
13419 * We could end up doing this multiple times for the same
13420 * segment if we have a larger local segment than remote
13421 * segment. That shouldn't be an issue.
13423 if ((io->io_hdr.flags & CTL_FLAG_NO_DATASYNC) == 0) {
13425 * XXX KDM use bus_dmamap_sync() here.
13429 rq->size = dma_length;
13431 tmp_ptr = (uint8_t *)local_sglist[i].addr;
13432 tmp_ptr += local_used;
13434 /* Use physical addresses when talking to ISC hardware */
13435 if ((io->io_hdr.flags & CTL_FLAG_BUS_ADDR) == 0) {
13436 /* XXX KDM use busdma */
13438 rq->local = vtophys(tmp_ptr);
13441 rq->local = tmp_ptr;
13443 tmp_ptr = (uint8_t *)remote_sglist[j].addr;
13444 tmp_ptr += remote_used;
13445 rq->remote = tmp_ptr;
13447 rq->callback = NULL;
13449 local_used += cur_len;
13450 if (local_used >= local_sglist[i].len) {
13455 remote_used += cur_len;
13456 if (remote_used >= remote_sglist[j].len) {
13460 total_used += cur_len;
13462 if (total_used >= io->scsiio.kern_data_len)
13463 rq->callback = callback;
13465 if ((rq->size & 0x7) != 0) {
13466 printf("%s: warning: size %d is not on 8b boundary\n",
13467 __func__, rq->size);
13469 if (((uintptr_t)rq->local & 0x7) != 0) {
13470 printf("%s: warning: local %p not on 8b boundary\n",
13471 __func__, rq->local);
13473 if (((uintptr_t)rq->remote & 0x7) != 0) {
13474 printf("%s: warning: remote %p not on 8b boundary\n",
13475 __func__, rq->local);
13478 printf("%s: %s: local %#x remote %#x size %d\n", __func__,
13479 (command == CTL_HA_DT_CMD_WRITE) ? "WRITE" : "READ",
13480 rq->local, rq->remote, rq->size);
13483 isc_ret = ctl_dt_single(rq);
13484 if (isc_ret == CTL_HA_STATUS_WAIT)
13487 if (isc_ret == CTL_HA_STATUS_DISCONNECT) {
13488 rq->ret = CTL_HA_STATUS_SUCCESS;
13502 ctl_datamove_remote_read(union ctl_io *io)
13508 * This will send an error to the other controller in the case of a
13511 retval = ctl_datamove_remote_sgl_setup(io);
13515 retval = ctl_datamove_remote_xfer(io, CTL_HA_DT_CMD_READ,
13516 ctl_datamove_remote_read_cb);
13518 && ((io->io_hdr.flags & CTL_FLAG_AUTO_MIRROR) == 0)) {
13520 * Make sure we free memory if there was an error.. The
13521 * ctl_datamove_remote_xfer() function will send the
13522 * datamove done message, or call the callback with an
13523 * error if there is a problem.
13525 for (i = 0; i < io->scsiio.kern_sg_entries; i++)
13526 free(io->io_hdr.local_sglist[i].addr, M_CTL);
13533 * Process a datamove request from the other controller. This is used for
13534 * XFER mode only, not SER_ONLY mode. For writes, we DMA into local memory
13535 * first. Once that is complete, the data gets DMAed into the remote
13536 * controller's memory. For reads, we DMA from the remote controller's
13537 * memory into our memory first, and then move it out to the FETD.
13540 ctl_datamove_remote(union ctl_io *io)
13542 struct ctl_softc *softc;
13544 softc = control_softc;
13546 mtx_assert(&softc->ctl_lock, MA_NOTOWNED);
13549 * Note that we look for an aborted I/O here, but don't do some of
13550 * the other checks that ctl_datamove() normally does.
13551 * We don't need to run the datamove delay code, since that should
13552 * have been done if need be on the other controller.
13554 if (io->io_hdr.flags & CTL_FLAG_ABORT) {
13555 printf("%s: tag 0x%04x on (%d:%d:%d:%d) aborted\n", __func__,
13556 io->scsiio.tag_num, io->io_hdr.nexus.initid.id,
13557 io->io_hdr.nexus.targ_port,
13558 io->io_hdr.nexus.targ_target.id,
13559 io->io_hdr.nexus.targ_lun);
13560 io->io_hdr.port_status = 31338;
13561 ctl_send_datamove_done(io, /*have_lock*/ 0);
13565 if ((io->io_hdr.flags & CTL_FLAG_DATA_MASK) == CTL_FLAG_DATA_OUT) {
13566 ctl_datamove_remote_write(io);
13567 } else if ((io->io_hdr.flags & CTL_FLAG_DATA_MASK) == CTL_FLAG_DATA_IN){
13568 ctl_datamove_remote_read(io);
13570 union ctl_ha_msg msg;
13571 struct scsi_sense_data *sense;
13575 memset(&msg, 0, sizeof(msg));
13577 msg.hdr.msg_type = CTL_MSG_BAD_JUJU;
13578 msg.hdr.status = CTL_SCSI_ERROR;
13579 msg.scsi.scsi_status = SCSI_STATUS_CHECK_COND;
13581 retry_count = 4243;
13583 sense = &msg.scsi.sense_data;
13584 sks[0] = SSD_SCS_VALID;
13585 sks[1] = (retry_count >> 8) & 0xff;
13586 sks[2] = retry_count & 0xff;
13588 /* "Internal target failure" */
13589 scsi_set_sense_data(sense,
13590 /*sense_format*/ SSD_TYPE_NONE,
13591 /*current_error*/ 1,
13592 /*sense_key*/ SSD_KEY_HARDWARE_ERROR,
13595 /*type*/ SSD_ELEM_SKS,
13596 /*size*/ sizeof(sks),
13600 io->io_hdr.flags &= ~CTL_FLAG_IO_ACTIVE;
13601 if (io->io_hdr.flags & CTL_FLAG_FAILOVER) {
13602 ctl_failover_io(io, /*have_lock*/ 1);
13606 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg, sizeof(msg), 0) >
13607 CTL_HA_STATUS_SUCCESS) {
13608 /* XXX KDM what to do if this fails? */
13616 ctl_process_done(union ctl_io *io)
13618 struct ctl_lun *lun;
13619 struct ctl_softc *ctl_softc;
13620 void (*fe_done)(union ctl_io *io);
13621 uint32_t targ_port = ctl_port_idx(io->io_hdr.nexus.targ_port);
13623 CTL_DEBUG_PRINT(("ctl_process_done\n"));
13626 control_softc->ctl_ports[targ_port]->fe_done;
13629 if ((time_uptime - io->io_hdr.start_time) > ctl_time_io_secs) {
13634 ctl_scsi_path_string(io, path_str, sizeof(path_str));
13635 sbuf_new(&sb, str, sizeof(str), SBUF_FIXEDLEN);
13637 sbuf_cat(&sb, path_str);
13638 switch (io->io_hdr.io_type) {
13640 ctl_scsi_command_string(&io->scsiio, NULL, &sb);
13641 sbuf_printf(&sb, "\n");
13642 sbuf_cat(&sb, path_str);
13643 sbuf_printf(&sb, "Tag: 0x%04x, type %d\n",
13644 io->scsiio.tag_num, io->scsiio.tag_type);
13647 sbuf_printf(&sb, "Task I/O type: %d, Tag: 0x%04x, "
13648 "Tag Type: %d\n", io->taskio.task_action,
13649 io->taskio.tag_num, io->taskio.tag_type);
13652 printf("Invalid CTL I/O type %d\n", io->io_hdr.io_type);
13653 panic("Invalid CTL I/O type %d\n", io->io_hdr.io_type);
13656 sbuf_cat(&sb, path_str);
13657 sbuf_printf(&sb, "ctl_process_done: %jd seconds\n",
13658 (intmax_t)time_uptime - io->io_hdr.start_time);
13660 printf("%s", sbuf_data(&sb));
13662 #endif /* CTL_TIME_IO */
13664 switch (io->io_hdr.io_type) {
13668 if (bootverbose || verbose > 0)
13669 ctl_io_error_print(io, NULL);
13670 if (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC)
13674 return (CTL_RETVAL_COMPLETE);
13677 printf("ctl_process_done: invalid io type %d\n",
13678 io->io_hdr.io_type);
13679 panic("ctl_process_done: invalid io type %d\n",
13680 io->io_hdr.io_type);
13681 break; /* NOTREACHED */
13684 lun = (struct ctl_lun *)io->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
13686 CTL_DEBUG_PRINT(("NULL LUN for lun %d\n",
13687 io->io_hdr.nexus.targ_mapped_lun));
13691 ctl_softc = lun->ctl_softc;
13693 mtx_lock(&lun->lun_lock);
13696 * Check to see if we have any errors to inject here. We only
13697 * inject errors for commands that don't already have errors set.
13699 if ((STAILQ_FIRST(&lun->error_list) != NULL)
13700 && ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS))
13701 ctl_inject_error(lun, io);
13704 * XXX KDM how do we treat commands that aren't completed
13707 * XXX KDM should we also track I/O latency?
13709 if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS &&
13710 io->io_hdr.io_type == CTL_IO_SCSI) {
13712 struct bintime cur_bt;
13716 if ((io->io_hdr.flags & CTL_FLAG_DATA_MASK) ==
13718 type = CTL_STATS_READ;
13719 else if ((io->io_hdr.flags & CTL_FLAG_DATA_MASK) ==
13721 type = CTL_STATS_WRITE;
13723 type = CTL_STATS_NO_IO;
13725 lun->stats.ports[targ_port].bytes[type] +=
13726 io->scsiio.kern_total_len;
13727 lun->stats.ports[targ_port].operations[type]++;
13729 bintime_add(&lun->stats.ports[targ_port].dma_time[type],
13730 &io->io_hdr.dma_bt);
13731 lun->stats.ports[targ_port].num_dmas[type] +=
13732 io->io_hdr.num_dmas;
13733 getbintime(&cur_bt);
13734 bintime_sub(&cur_bt, &io->io_hdr.start_bt);
13735 bintime_add(&lun->stats.ports[targ_port].time[type], &cur_bt);
13740 * Remove this from the OOA queue.
13742 TAILQ_REMOVE(&lun->ooa_queue, &io->io_hdr, ooa_links);
13745 * Run through the blocked queue on this LUN and see if anything
13746 * has become unblocked, now that this transaction is done.
13748 ctl_check_blocked(lun);
13751 * If the LUN has been invalidated, free it if there is nothing
13752 * left on its OOA queue.
13754 if ((lun->flags & CTL_LUN_INVALID)
13755 && TAILQ_EMPTY(&lun->ooa_queue)) {
13756 mtx_unlock(&lun->lun_lock);
13757 mtx_lock(&ctl_softc->ctl_lock);
13759 mtx_unlock(&ctl_softc->ctl_lock);
13761 mtx_unlock(&lun->lun_lock);
13764 * If this command has been aborted, make sure we set the status
13765 * properly. The FETD is responsible for freeing the I/O and doing
13766 * whatever it needs to do to clean up its state.
13768 if (io->io_hdr.flags & CTL_FLAG_ABORT)
13769 ctl_set_task_aborted(&io->scsiio);
13772 * We print out status for every task management command. For SCSI
13773 * commands, we filter out any unit attention errors; they happen
13774 * on every boot, and would clutter up the log. Note: task
13775 * management commands aren't printed here, they are printed above,
13776 * since they should never even make it down here.
13778 switch (io->io_hdr.io_type) {
13779 case CTL_IO_SCSI: {
13780 int error_code, sense_key, asc, ascq;
13784 if (((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SCSI_ERROR)
13785 && (io->scsiio.scsi_status == SCSI_STATUS_CHECK_COND)) {
13787 * Since this is just for printing, no need to
13788 * show errors here.
13790 scsi_extract_sense_len(&io->scsiio.sense_data,
13791 io->scsiio.sense_len,
13796 /*show_errors*/ 0);
13799 if (((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS)
13800 && (((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SCSI_ERROR)
13801 || (io->scsiio.scsi_status != SCSI_STATUS_CHECK_COND)
13802 || (sense_key != SSD_KEY_UNIT_ATTENTION))) {
13804 if ((time_uptime - ctl_softc->last_print_jiffies) <= 0){
13805 ctl_softc->skipped_prints++;
13807 uint32_t skipped_prints;
13809 skipped_prints = ctl_softc->skipped_prints;
13811 ctl_softc->skipped_prints = 0;
13812 ctl_softc->last_print_jiffies = time_uptime;
13814 if (skipped_prints > 0) {
13816 csevent_log(CSC_CTL | CSC_SHELF_SW |
13818 csevent_LogType_Trace,
13819 csevent_Severity_Information,
13820 csevent_AlertLevel_Green,
13821 csevent_FRU_Firmware,
13822 csevent_FRU_Unknown,
13823 "High CTL error volume, %d prints "
13824 "skipped", skipped_prints);
13827 if (bootverbose || verbose > 0)
13828 ctl_io_error_print(io, NULL);
13834 if (bootverbose || verbose > 0)
13835 ctl_io_error_print(io, NULL);
13842 * Tell the FETD or the other shelf controller we're done with this
13843 * command. Note that only SCSI commands get to this point. Task
13844 * management commands are completed above.
13846 * We only send status to the other controller if we're in XFER
13847 * mode. In SER_ONLY mode, the I/O is done on the controller that
13848 * received the I/O (from CTL's perspective), and so the status is
13851 * XXX KDM if we hold the lock here, we could cause a deadlock
13852 * if the frontend comes back in in this context to queue
13855 if ((ctl_softc->ha_mode == CTL_HA_MODE_XFER)
13856 && (io->io_hdr.flags & CTL_FLAG_FROM_OTHER_SC)) {
13857 union ctl_ha_msg msg;
13859 memset(&msg, 0, sizeof(msg));
13860 msg.hdr.msg_type = CTL_MSG_FINISH_IO;
13861 msg.hdr.original_sc = io->io_hdr.original_sc;
13862 msg.hdr.nexus = io->io_hdr.nexus;
13863 msg.hdr.status = io->io_hdr.status;
13864 msg.scsi.scsi_status = io->scsiio.scsi_status;
13865 msg.scsi.tag_num = io->scsiio.tag_num;
13866 msg.scsi.tag_type = io->scsiio.tag_type;
13867 msg.scsi.sense_len = io->scsiio.sense_len;
13868 msg.scsi.sense_residual = io->scsiio.sense_residual;
13869 msg.scsi.residual = io->scsiio.residual;
13870 memcpy(&msg.scsi.sense_data, &io->scsiio.sense_data,
13871 sizeof(io->scsiio.sense_data));
13873 * We copy this whether or not this is an I/O-related
13874 * command. Otherwise, we'd have to go and check to see
13875 * whether it's a read/write command, and it really isn't
13878 memcpy(&msg.scsi.lbalen,
13879 &io->io_hdr.ctl_private[CTL_PRIV_LBA_LEN].bytes,
13880 sizeof(msg.scsi.lbalen));
13882 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg,
13883 sizeof(msg), 0) > CTL_HA_STATUS_SUCCESS) {
13884 /* XXX do something here */
13893 return (CTL_RETVAL_COMPLETE);
13898 * Front end should call this if it doesn't do autosense. When the request
13899 * sense comes back in from the initiator, we'll dequeue this and send it.
13902 ctl_queue_sense(union ctl_io *io)
13904 struct ctl_lun *lun;
13905 struct ctl_softc *ctl_softc;
13906 uint32_t initidx, targ_lun;
13908 ctl_softc = control_softc;
13910 CTL_DEBUG_PRINT(("ctl_queue_sense\n"));
13913 * LUN lookup will likely move to the ctl_work_thread() once we
13914 * have our new queueing infrastructure (that doesn't put things on
13915 * a per-LUN queue initially). That is so that we can handle
13916 * things like an INQUIRY to a LUN that we don't have enabled. We
13917 * can't deal with that right now.
13919 mtx_lock(&ctl_softc->ctl_lock);
13922 * If we don't have a LUN for this, just toss the sense
13925 targ_lun = io->io_hdr.nexus.targ_lun;
13926 targ_lun = ctl_map_lun(io->io_hdr.nexus.targ_port, targ_lun);
13927 if ((targ_lun < CTL_MAX_LUNS)
13928 && (ctl_softc->ctl_luns[targ_lun] != NULL))
13929 lun = ctl_softc->ctl_luns[targ_lun];
13933 initidx = ctl_get_initindex(&io->io_hdr.nexus);
13935 mtx_lock(&lun->lun_lock);
13937 * Already have CA set for this LUN...toss the sense information.
13939 if (ctl_is_set(lun->have_ca, initidx)) {
13940 mtx_unlock(&lun->lun_lock);
13944 memcpy(&lun->pending_sense[initidx], &io->scsiio.sense_data,
13945 ctl_min(sizeof(lun->pending_sense[initidx]),
13946 sizeof(io->scsiio.sense_data)));
13947 ctl_set_mask(lun->have_ca, initidx);
13948 mtx_unlock(&lun->lun_lock);
13951 mtx_unlock(&ctl_softc->ctl_lock);
13955 return (CTL_RETVAL_COMPLETE);
13960 * Primary command inlet from frontend ports. All SCSI and task I/O
13961 * requests must go through this function.
13964 ctl_queue(union ctl_io *io)
13966 struct ctl_softc *ctl_softc;
13968 CTL_DEBUG_PRINT(("ctl_queue cdb[0]=%02X\n", io->scsiio.cdb[0]));
13970 ctl_softc = control_softc;
13973 io->io_hdr.start_time = time_uptime;
13974 getbintime(&io->io_hdr.start_bt);
13975 #endif /* CTL_TIME_IO */
13977 /* Map FE-specific LUN ID into global one. */
13978 io->io_hdr.nexus.targ_mapped_lun =
13979 ctl_map_lun(io->io_hdr.nexus.targ_port, io->io_hdr.nexus.targ_lun);
13981 switch (io->io_hdr.io_type) {
13984 ctl_enqueue_incoming(io);
13987 printf("ctl_queue: unknown I/O type %d\n", io->io_hdr.io_type);
13991 return (CTL_RETVAL_COMPLETE);
13994 #ifdef CTL_IO_DELAY
13996 ctl_done_timer_wakeup(void *arg)
14000 io = (union ctl_io *)arg;
14003 #endif /* CTL_IO_DELAY */
14006 ctl_done(union ctl_io *io)
14008 struct ctl_softc *ctl_softc;
14010 ctl_softc = control_softc;
14013 * Enable this to catch duplicate completion issues.
14016 if (io->io_hdr.flags & CTL_FLAG_ALREADY_DONE) {
14017 printf("%s: type %d msg %d cdb %x iptl: "
14018 "%d:%d:%d:%d tag 0x%04x "
14019 "flag %#x status %x\n",
14021 io->io_hdr.io_type,
14022 io->io_hdr.msg_type,
14024 io->io_hdr.nexus.initid.id,
14025 io->io_hdr.nexus.targ_port,
14026 io->io_hdr.nexus.targ_target.id,
14027 io->io_hdr.nexus.targ_lun,
14028 (io->io_hdr.io_type ==
14030 io->taskio.tag_num :
14031 io->scsiio.tag_num,
14033 io->io_hdr.status);
14035 io->io_hdr.flags |= CTL_FLAG_ALREADY_DONE;
14039 * This is an internal copy of an I/O, and should not go through
14040 * the normal done processing logic.
14042 if (io->io_hdr.flags & CTL_FLAG_INT_COPY)
14046 * We need to send a msg to the serializing shelf to finish the IO
14047 * as well. We don't send a finish message to the other shelf if
14048 * this is a task management command. Task management commands
14049 * aren't serialized in the OOA queue, but rather just executed on
14050 * both shelf controllers for commands that originated on that
14053 if ((io->io_hdr.flags & CTL_FLAG_SENT_2OTHER_SC)
14054 && (io->io_hdr.io_type != CTL_IO_TASK)) {
14055 union ctl_ha_msg msg_io;
14057 msg_io.hdr.msg_type = CTL_MSG_FINISH_IO;
14058 msg_io.hdr.serializing_sc = io->io_hdr.serializing_sc;
14059 if (ctl_ha_msg_send(CTL_HA_CHAN_CTL, &msg_io,
14060 sizeof(msg_io), 0 ) != CTL_HA_STATUS_SUCCESS) {
14062 /* continue on to finish IO */
14064 #ifdef CTL_IO_DELAY
14065 if (io->io_hdr.flags & CTL_FLAG_DELAY_DONE) {
14066 struct ctl_lun *lun;
14068 lun =(struct ctl_lun *)io->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
14070 io->io_hdr.flags &= ~CTL_FLAG_DELAY_DONE;
14072 struct ctl_lun *lun;
14074 lun =(struct ctl_lun *)io->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
14077 && (lun->delay_info.done_delay > 0)) {
14078 struct callout *callout;
14080 callout = (struct callout *)&io->io_hdr.timer_bytes;
14081 callout_init(callout, /*mpsafe*/ 1);
14082 io->io_hdr.flags |= CTL_FLAG_DELAY_DONE;
14083 callout_reset(callout,
14084 lun->delay_info.done_delay * hz,
14085 ctl_done_timer_wakeup, io);
14086 if (lun->delay_info.done_type == CTL_DELAY_TYPE_ONESHOT)
14087 lun->delay_info.done_delay = 0;
14091 #endif /* CTL_IO_DELAY */
14093 ctl_enqueue_done(io);
14097 ctl_isc(struct ctl_scsiio *ctsio)
14099 struct ctl_lun *lun;
14102 lun = (struct ctl_lun *)ctsio->io_hdr.ctl_private[CTL_PRIV_LUN].ptr;
14104 CTL_DEBUG_PRINT(("ctl_isc: command: %02x\n", ctsio->cdb[0]));
14106 CTL_DEBUG_PRINT(("ctl_isc: calling data_submit()\n"));
14108 retval = lun->backend->data_submit((union ctl_io *)ctsio);
14115 ctl_work_thread(void *arg)
14117 struct ctl_thread *thr = (struct ctl_thread *)arg;
14118 struct ctl_softc *softc = thr->ctl_softc;
14122 CTL_DEBUG_PRINT(("ctl_work_thread starting\n"));
14128 * We handle the queues in this order:
14130 * - done queue (to free up resources, unblock other commands)
14134 * If those queues are empty, we break out of the loop and
14137 mtx_lock(&thr->queue_lock);
14138 io = (union ctl_io *)STAILQ_FIRST(&thr->isc_queue);
14140 STAILQ_REMOVE_HEAD(&thr->isc_queue, links);
14141 mtx_unlock(&thr->queue_lock);
14142 ctl_handle_isc(io);
14145 io = (union ctl_io *)STAILQ_FIRST(&thr->done_queue);
14147 STAILQ_REMOVE_HEAD(&thr->done_queue, links);
14148 /* clear any blocked commands, call fe_done */
14149 mtx_unlock(&thr->queue_lock);
14150 retval = ctl_process_done(io);
14153 io = (union ctl_io *)STAILQ_FIRST(&thr->incoming_queue);
14155 STAILQ_REMOVE_HEAD(&thr->incoming_queue, links);
14156 mtx_unlock(&thr->queue_lock);
14157 if (io->io_hdr.io_type == CTL_IO_TASK)
14160 ctl_scsiio_precheck(softc, &io->scsiio);
14163 if (!ctl_pause_rtr) {
14164 io = (union ctl_io *)STAILQ_FIRST(&thr->rtr_queue);
14166 STAILQ_REMOVE_HEAD(&thr->rtr_queue, links);
14167 mtx_unlock(&thr->queue_lock);
14168 retval = ctl_scsiio(&io->scsiio);
14169 if (retval != CTL_RETVAL_COMPLETE)
14170 CTL_DEBUG_PRINT(("ctl_scsiio failed\n"));
14175 /* Sleep until we have something to do. */
14176 mtx_sleep(thr, &thr->queue_lock, PDROP | PRIBIO, "-", 0);
14181 ctl_lun_thread(void *arg)
14183 struct ctl_softc *softc = (struct ctl_softc *)arg;
14184 struct ctl_be_lun *be_lun;
14187 CTL_DEBUG_PRINT(("ctl_lun_thread starting\n"));
14191 mtx_lock(&softc->ctl_lock);
14192 be_lun = STAILQ_FIRST(&softc->pending_lun_queue);
14193 if (be_lun != NULL) {
14194 STAILQ_REMOVE_HEAD(&softc->pending_lun_queue, links);
14195 mtx_unlock(&softc->ctl_lock);
14196 ctl_create_lun(be_lun);
14200 /* Sleep until we have something to do. */
14201 mtx_sleep(&softc->pending_lun_queue, &softc->ctl_lock,
14202 PDROP | PRIBIO, "-", 0);
14207 ctl_enqueue_incoming(union ctl_io *io)
14209 struct ctl_softc *softc = control_softc;
14210 struct ctl_thread *thr;
14213 idx = (io->io_hdr.nexus.targ_port * 127 +
14214 io->io_hdr.nexus.initid.id) % worker_threads;
14215 thr = &softc->threads[idx];
14216 mtx_lock(&thr->queue_lock);
14217 STAILQ_INSERT_TAIL(&thr->incoming_queue, &io->io_hdr, links);
14218 mtx_unlock(&thr->queue_lock);
14223 ctl_enqueue_rtr(union ctl_io *io)
14225 struct ctl_softc *softc = control_softc;
14226 struct ctl_thread *thr;
14228 thr = &softc->threads[io->io_hdr.nexus.targ_mapped_lun % worker_threads];
14229 mtx_lock(&thr->queue_lock);
14230 STAILQ_INSERT_TAIL(&thr->rtr_queue, &io->io_hdr, links);
14231 mtx_unlock(&thr->queue_lock);
14236 ctl_enqueue_done(union ctl_io *io)
14238 struct ctl_softc *softc = control_softc;
14239 struct ctl_thread *thr;
14241 thr = &softc->threads[io->io_hdr.nexus.targ_mapped_lun % worker_threads];
14242 mtx_lock(&thr->queue_lock);
14243 STAILQ_INSERT_TAIL(&thr->done_queue, &io->io_hdr, links);
14244 mtx_unlock(&thr->queue_lock);
14249 ctl_enqueue_isc(union ctl_io *io)
14251 struct ctl_softc *softc = control_softc;
14252 struct ctl_thread *thr;
14254 thr = &softc->threads[io->io_hdr.nexus.targ_mapped_lun % worker_threads];
14255 mtx_lock(&thr->queue_lock);
14256 STAILQ_INSERT_TAIL(&thr->isc_queue, &io->io_hdr, links);
14257 mtx_unlock(&thr->queue_lock);
14261 /* Initialization and failover */
14264 ctl_init_isc_msg(void)
14266 printf("CTL: Still calling this thing\n");
14271 * Initializes component into configuration defined by bootMode
14273 * returns hasc_Status:
14275 * ERROR - fatal error
14277 static ctl_ha_comp_status
14278 ctl_isc_init(struct ctl_ha_component *c)
14280 ctl_ha_comp_status ret = CTL_HA_COMP_STATUS_OK;
14287 * Starts component in state requested. If component starts successfully,
14288 * it must set its own state to the requestrd state
14289 * When requested state is HASC_STATE_HA, the component may refine it
14290 * by adding _SLAVE or _MASTER flags.
14291 * Currently allowed state transitions are:
14292 * UNKNOWN->HA - initial startup
14293 * UNKNOWN->SINGLE - initial startup when no parter detected
14294 * HA->SINGLE - failover
14295 * returns ctl_ha_comp_status:
14296 * OK - component successfully started in requested state
14297 * FAILED - could not start the requested state, failover may
14299 * ERROR - fatal error detected, no future startup possible
14301 static ctl_ha_comp_status
14302 ctl_isc_start(struct ctl_ha_component *c, ctl_ha_state state)
14304 ctl_ha_comp_status ret = CTL_HA_COMP_STATUS_OK;
14306 printf("%s: go\n", __func__);
14308 // UNKNOWN->HA or UNKNOWN->SINGLE (bootstrap)
14309 if (c->state == CTL_HA_STATE_UNKNOWN ) {
14311 if (ctl_ha_msg_create(CTL_HA_CHAN_CTL, ctl_isc_event_handler)
14312 != CTL_HA_STATUS_SUCCESS) {
14313 printf("ctl_isc_start: ctl_ha_msg_create failed.\n");
14314 ret = CTL_HA_COMP_STATUS_ERROR;
14316 } else if (CTL_HA_STATE_IS_HA(c->state)
14317 && CTL_HA_STATE_IS_SINGLE(state)){
14318 // HA->SINGLE transition
14322 printf("ctl_isc_start:Invalid state transition %X->%X\n",
14324 ret = CTL_HA_COMP_STATUS_ERROR;
14326 if (CTL_HA_STATE_IS_SINGLE(state))
14335 * Quiesce component
14336 * The component must clear any error conditions (set status to OK) and
14337 * prepare itself to another Start call
14338 * returns ctl_ha_comp_status:
14342 static ctl_ha_comp_status
14343 ctl_isc_quiesce(struct ctl_ha_component *c)
14345 int ret = CTL_HA_COMP_STATUS_OK;
14352 struct ctl_ha_component ctl_ha_component_ctlisc =
14355 .state = CTL_HA_STATE_UNKNOWN,
14356 .init = ctl_isc_init,
14357 .start = ctl_isc_start,
14358 .quiesce = ctl_isc_quiesce