3 # NOTES -- Lines that can be cut/pasted into kernel and hints configs.
5 # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
6 # 'makeoptions', 'hints', etc. go into the kernel configuration that you
9 # Lines that begin with 'hint.' are NOT for config(8), they go into your
10 # hints file. See /boot/device.hints and/or the 'hints' config(8) directive.
12 # Please use ``make LINT'' to create an old-style LINT file if you want to
13 # do kernel test-builds.
15 # This file contains machine independent kernel configuration notes. For
16 # machine dependent notes, look in /sys/<arch>/conf/NOTES.
20 # NOTES conventions and style guide:
22 # Large block comments should begin and end with a line containing only a
25 # To describe a particular object, a block comment (if it exists) should
26 # come first. Next should come device, options, and hints lines in that
27 # order. All device and option lines must be described by a comment that
28 # doesn't just expand the device or option name. Use only a concise
29 # comment on the same line if possible. Very detailed descriptions of
30 # devices and subsystems belong in man pages.
32 # A space followed by a tab separates 'options' from an option name. Two
33 # spaces followed by a tab separate 'device' from a device name. Comments
34 # after an option or device should use one space after the comment character.
35 # To comment out a negative option that disables code and thus should not be
36 # enabled for LINT builds, precede 'options' with "#!".
40 # This is the ``identification'' of the kernel. Usually this should
41 # be the same as the name of your kernel.
46 # The `maxusers' parameter controls the static sizing of a number of
47 # internal system tables by a formula defined in subr_param.c.
48 # Omitting this parameter or setting it to 0 will cause the system to
49 # auto-size based on physical memory.
53 # To statically compile in device wiring instead of /boot/device.hints
54 #hints "LINT.hints" # Default places to look for devices.
56 # Use the following to compile in values accessible to the kernel
57 # through getenv() (or kenv(1) in userland). The format of the file
58 # is 'variable=value', see kenv(1)
63 # The `makeoptions' parameter allows variables to be passed to the
64 # generated Makefile in the build area.
66 # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
67 # after most other flags. Here we use it to inhibit use of non-optimal
68 # gcc built-in functions (e.g., memcmp).
70 # DEBUG happens to be magic.
71 # The following is equivalent to 'config -g KERNELNAME' and creates
72 # 'kernel.debug' compiled with -g debugging as well as a normal
73 # 'kernel'. Use 'make install.debug' to install the debug kernel
74 # but that isn't normally necessary as the debug symbols are not loaded
75 # by the kernel and are not useful there anyway.
77 # KERNEL can be overridden so that you can change the default name of your
80 # MODULES_OVERRIDE can be used to limit modules built to a specific list.
82 makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
83 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
84 #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
85 # Only build ext2fs module plus those parts of the sound system I need.
86 #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3"
87 makeoptions DESTDIR=/tmp
90 # FreeBSD processes are subject to certain limits to their consumption
91 # of system resources. See getrlimit(2) for more details. Each
92 # resource limit has two values, a "soft" limit and a "hard" limit.
93 # The soft limits can be modified during normal system operation, but
94 # the hard limits are set at boot time. Their default values are
95 # in sys/<arch>/include/vmparam.h. There are two ways to change them:
97 # 1. Set the values at kernel build time. The options below are one
98 # way to allow that limit to grow to 1GB. They can be increased
99 # further by changing the parameters:
101 # 2. In /boot/loader.conf, set the tunables kern.maxswzone,
102 # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz,
103 # kern.dflssiz, kern.maxssiz and kern.sgrowsiz.
105 # The options in /boot/loader.conf override anything in the kernel
106 # configuration file. See the function init_param1 in
107 # sys/kern/subr_param.c for more details.
110 options MAXDSIZ=(1024UL*1024*1024)
111 options MAXSSIZ=(128UL*1024*1024)
112 options DFLDSIZ=(1024UL*1024*1024)
115 # BLKDEV_IOSIZE sets the default block size used in user block
116 # device I/O. Note that this value will be overridden by the label
117 # when specifying a block device from a label with a non-0
118 # partition blocksize. The default is PAGE_SIZE.
120 options BLKDEV_IOSIZE=8192
123 # MAXPHYS and DFLTPHYS
125 # These are the maximal and safe 'raw' I/O block device access sizes.
126 # Reads and writes will be split into MAXPHYS chunks for known good
127 # devices and DFLTPHYS for the rest. Some applications have better
128 # performance with larger raw I/O access sizes. Note that certain VM
129 # parameters are derived from these values and making them too large
130 # can make an an unbootable kernel.
132 # The defaults are 64K and 128K respectively.
133 options DFLTPHYS=(64*1024)
134 options MAXPHYS=(128*1024)
137 # This allows you to actually store this configuration file into
138 # the kernel binary itself. See config(8) for more details.
140 options INCLUDE_CONFIG_FILE # Include this file in kernel
142 options GEOM_AES # Don't use, use GEOM_BDE
143 options GEOM_BDE # Disk encryption.
144 options GEOM_BSD # BSD disklabels
145 options GEOM_CACHE # Disk cache.
146 options GEOM_CONCAT # Disk concatenation.
147 options GEOM_ELI # Disk encryption.
148 options GEOM_FOX # Redundant path mitigation
149 options GEOM_GATE # Userland services.
150 options GEOM_JOURNAL # Journaling.
151 options GEOM_LABEL # Providers labelization.
152 options GEOM_LINUX_LVM # Linux LVM2 volumes
153 options GEOM_MBR # DOS/MBR partitioning
154 options GEOM_MIRROR # Disk mirroring.
155 options GEOM_MULTIPATH # Disk multipath
156 options GEOM_NOP # Test class.
157 options GEOM_PART_APM # Apple partitioning
158 options GEOM_PART_BSD # BSD disklabel
159 options GEOM_PART_EBR # Extended Boot Records
160 options GEOM_PART_EBR_COMPAT # Backward compatible partition names
161 options GEOM_PART_GPT # GPT partitioning
162 options GEOM_PART_MBR # MBR partitioning
163 options GEOM_PART_PC98 # PC-9800 disk partitioning
164 options GEOM_PART_VTOC8 # SMI VTOC8 disk label
165 options GEOM_PC98 # NEC PC9800 partitioning
166 options GEOM_RAID # Soft RAID functionality.
167 options GEOM_RAID3 # RAID3 functionality.
168 options GEOM_SHSEC # Shared secret.
169 options GEOM_STRIPE # Disk striping.
170 options GEOM_SUNLABEL # Sun/Solaris partitioning
171 options GEOM_UZIP # Read-only compressed disks
172 options GEOM_VIRSTOR # Virtual storage.
173 options GEOM_VOL # Volume names from UFS superblock
174 options GEOM_ZERO # Performance testing helper.
177 # The root device and filesystem type can be compiled in;
178 # this provides a fallback option if the root device cannot
179 # be correctly guessed by the bootstrap code, or an override if
180 # the RB_DFLTROOT flag (-r) is specified when booting the kernel.
182 options ROOTDEVNAME=\"ufs:da0s2e\"
185 #####################################################################
188 # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options
189 # select which scheduler is compiled in.
191 # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run
192 # queue and no CPU affinity which makes it suboptimal for SMP. It has very
193 # good interactivity and priority selection.
195 # SCHED_ULE provides significant performance advantages over 4BSD on many
196 # workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues
197 # and scheduler locks. It also has a stronger notion of interactivity
198 # which leads to better responsiveness even on uniprocessor machines. This
199 # is the default scheduler.
201 # SCHED_STATS is a debugging option which keeps some stats in the sysctl
202 # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions.
208 #####################################################################
211 # SMP enables building of a Symmetric MultiProcessor Kernel.
214 options SMP # Symmetric MultiProcessor Kernel
216 # MAXCPU defines the maximum number of CPUs that can boot in the system.
217 # A default value should be already present, for every architecture.
220 # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin
221 # if the thread that currently owns the mutex is executing on another
222 # CPU. This behaviour is enabled by default, so this option can be used
224 options NO_ADAPTIVE_MUTEXES
226 # ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin
227 # if the thread that currently owns the rwlock is executing on another
228 # CPU. This behaviour is enabled by default, so this option can be used
230 options NO_ADAPTIVE_RWLOCKS
232 # ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that
233 # currently owns the sx lock is executing on another CPU.
234 # This behaviour is enabled by default, so this option can be used to
236 options NO_ADAPTIVE_SX
238 # MUTEX_NOINLINE forces mutex operations to call functions to perform each
239 # operation rather than inlining the simple cases. This can be used to
240 # shrink the size of the kernel text segment. Note that this behavior is
241 # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
242 # and WITNESS options.
243 options MUTEX_NOINLINE
245 # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each
246 # operation rather than inlining the simple cases. This can be used to
247 # shrink the size of the kernel text segment. Note that this behavior is
248 # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
249 # and WITNESS options.
250 options RWLOCK_NOINLINE
252 # SX_NOINLINE forces sx lock operations to call functions to perform each
253 # operation rather than inlining the simple cases. This can be used to
254 # shrink the size of the kernel text segment. Note that this behavior is
255 # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
256 # and WITNESS options.
259 # SMP Debugging Options:
261 # PREEMPTION allows the threads that are in the kernel to be preempted by
262 # higher priority [interrupt] threads. It helps with interactivity
263 # and allows interrupt threads to run sooner rather than waiting.
264 # WARNING! Only tested on amd64 and i386.
265 # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel
266 # threads. Its sole use is to expose race conditions and other
267 # bugs during development. Enabling this option will reduce
268 # performance and increase the frequency of kernel panics by
269 # design. If you aren't sure that you need it then you don't.
270 # Relies on the PREEMPTION option. DON'T TURN THIS ON.
271 # MUTEX_DEBUG enables various extra assertions in the mutex code.
272 # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table
273 # used to hold active sleep queues as well as sleep wait message
275 # TURNSTILE_PROFILING enables rudimentary profiling of the hash table
276 # used to hold active lock queues.
277 # WITNESS enables the witness code which detects deadlocks and cycles
278 # during locking operations.
279 # WITNESS_KDB causes the witness code to drop into the kernel debugger if
280 # a lock hierarchy violation occurs or if locks are held when going to
282 # WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
284 options FULL_PREEMPTION
288 options WITNESS_SKIPSPIN
290 # LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details.
291 options LOCK_PROFILING
292 # Set the number of buffers and the hash size. The hash size MUST be larger
293 # than the number of buffers. Hash size should be prime.
294 options MPROF_BUFFERS="1536"
295 options MPROF_HASH_SIZE="1543"
297 # Profiling for internal hash tables.
298 options SLEEPQUEUE_PROFILING
299 options TURNSTILE_PROFILING
302 #####################################################################
303 # COMPATIBILITY OPTIONS
306 # Implement system calls compatible with 4.3BSD and older versions of
307 # FreeBSD. You probably do NOT want to remove this as much current code
308 # still relies on the 4.3 emulation. Note that some architectures that
309 # are supported by FreeBSD do not include support for certain important
310 # aspects of this compatibility option, namely those related to the
311 # signal delivery mechanism.
318 # Note that as a general rule, COMPAT_FREEBSD<n> depends on
319 # COMPAT_FREEBSD<n+1>, COMPAT_FREEBSD<n+2>, etc.
321 # Enable FreeBSD4 compatibility syscalls
322 options COMPAT_FREEBSD4
324 # Enable FreeBSD5 compatibility syscalls
325 options COMPAT_FREEBSD5
327 # Enable FreeBSD6 compatibility syscalls
328 options COMPAT_FREEBSD6
330 # Enable FreeBSD7 compatibility syscalls
331 options COMPAT_FREEBSD7
334 # These three options provide support for System V Interface
335 # Definition-style interprocess communication, in the form of shared
336 # memory, semaphores, and message queues, respectively.
343 #####################################################################
347 # Compile with kernel debugger related code.
352 # Print a stack trace of the current thread on the console for a panic.
357 # Don't enter the debugger for a panic. Intended for unattended operation
358 # where you may want to enter the debugger from the console, but still want
359 # the machine to recover from a panic.
361 options KDB_UNATTENDED
364 # Enable the ddb debugger backend.
369 # Print the numerical value of symbols in addition to the symbolic
375 # Enable the remote gdb debugger backend.
380 # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the
381 # contents of the registered sysctl nodes on the console. It is disabled by
382 # default because it generates excessively verbose console output that can
383 # interfere with serial console operation.
388 # NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the
390 options NO_SYSCTL_DESCR
393 # MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9)
394 # allocations that are smaller than a page. The purpose is to isolate
395 # different malloc types into hash classes, so that any buffer
396 # overruns or use-after-free will usually only affect memory from
397 # malloc types in that hash class. This is purely a debugging tool;
398 # by varying the hash function and tracking which hash class was
399 # corrupted, the intersection of the hash classes from each instance
400 # will point to a single malloc type that is being misused. At this
401 # point inspection or memguard(9) can be used to catch the offending
404 options MALLOC_DEBUG_MAXZONES=8
407 # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator
408 # for the kernel used to detect modify-after-free scenarios. See the
409 # memguard(9) man page for more information on usage.
411 options DEBUG_MEMGUARD
414 # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for
417 options DEBUG_REDZONE
420 # KTRACE enables the system-call tracing facility ktrace(2). To be more
421 # SMP-friendly, KTRACE uses a worker thread to process most trace events
422 # asynchronously to the thread generating the event. This requires a
423 # pre-allocated store of objects representing trace events. The
424 # KTRACE_REQUEST_POOL option specifies the initial size of this store.
425 # The size of the pool can be adjusted both at boottime and runtime via
426 # the kern.ktrace_request_pool tunable and sysctl.
428 options KTRACE #kernel tracing
429 options KTRACE_REQUEST_POOL=101
432 # KTR is a kernel tracing facility imported from BSD/OS. It is
433 # enabled with the KTR option. KTR_ENTRIES defines the number of
434 # entries in the circular trace buffer; it must be a power of two.
435 # KTR_COMPILE defines the mask of events to compile into the kernel as
436 # defined by the KTR_* constants in <sys/ktr.h>. KTR_MASK defines the
437 # initial value of the ktr_mask variable which determines at runtime
438 # what events to trace. KTR_CPUMASK determines which CPU's log
439 # events, with bit X corresponding to CPU X. The layout of the string
440 # passed as KTR_CPUMASK must match a serie of bitmasks each of them
441 # separated by the ", " characters (ie:
442 # KTR_CPUMASK=("0xAF, 0xFFFFFFFFFFFFFFFF")). KTR_VERBOSE enables
443 # dumping of KTR events to the console by default. This functionality
444 # can be toggled via the debug.ktr_verbose sysctl and defaults to off
445 # if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details.
448 options KTR_ENTRIES=1024
449 options KTR_COMPILE=(KTR_INTR|KTR_PROC)
450 options KTR_MASK=KTR_INTR
451 options KTR_CPUMASK=("0x3")
455 # ALQ(9) is a facility for the asynchronous queuing of records from the kernel
456 # to a vnode, and is employed by services such as ktr(4) to produce trace
457 # files based on a kernel event stream. Records are written asynchronously
458 # in a worker thread.
464 # The INVARIANTS option is used in a number of source files to enable
465 # extra sanity checking of internal structures. This support is not
466 # enabled by default because of the extra time it would take to check
467 # for these conditions, which can only occur as a result of
468 # programming errors.
473 # The INVARIANT_SUPPORT option makes us compile in support for
474 # verifying some of the internal structures. It is a prerequisite for
475 # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
476 # called. The intent is that you can set 'INVARIANTS' for single
477 # source files (by changing the source file or specifying it on the
478 # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you
479 # wish to build a kernel module with 'INVARIANTS', then adding
480 # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary
481 # infrastructure without the added overhead.
483 options INVARIANT_SUPPORT
486 # The DIAGNOSTIC option is used to enable extra debugging information
487 # from some parts of the kernel. As this makes everything more noisy,
488 # it is disabled by default.
493 # REGRESSION causes optional kernel interfaces necessary only for regression
494 # testing to be enabled. These interfaces may constitute security risks
495 # when enabled, as they permit processes to easily modify aspects of the
496 # run-time environment to reproduce unlikely or unusual (possibly normally
497 # impossible) scenarios.
502 # This option lets some drivers co-exist that can't co-exist in a running
503 # system. This is used to be able to compile all kernel code in one go for
504 # quality assurance purposes (like this file, which the option takes it name
507 options COMPILING_LINT
510 # STACK enables the stack(9) facility, allowing the capture of kernel stack
511 # for the purpose of procinfo(1), etc. stack(9) will also be compiled in
512 # automatically if DDB(4) is compiled into the kernel.
517 #####################################################################
518 # PERFORMANCE MONITORING OPTIONS
521 # The hwpmc driver that allows the use of in-CPU performance monitoring
522 # counters for performance monitoring. The base kernel needs to be configured
523 # with the 'options' line, while the hwpmc device can be either compiled
524 # in or loaded as a loadable kernel module.
526 # Additional configuration options may be required on specific architectures,
527 # please see hwpmc(4).
529 device hwpmc # Driver (also a loadable module)
530 options HWPMC_HOOKS # Other necessary kernel hooks
533 #####################################################################
539 options INET #Internet communications protocols
540 options INET6 #IPv6 communications protocols
542 options ROUTETABLES=2 # max 16. 1 is back compatible.
544 # In order to enable IPSEC you MUST also add device crypto to
545 # your kernel configuration
546 options IPSEC #IP security (requires device crypto)
547 #options IPSEC_DEBUG #debug for IP security
550 # Set IPSEC_FILTERTUNNEL to change the default of the sysctl to force packets
551 # coming through a tunnel to be processed by any configured packet filtering
552 # twice. The default is that packets coming out of a tunnel are _not_ processed;
553 # they are assumed trusted.
555 # IPSEC history is preserved for such packets, and can be filtered
556 # using ipfw(8)'s 'ipsec' keyword, when this option is enabled.
558 #options IPSEC_FILTERTUNNEL #filter ipsec packets from a tunnel
560 # Set IPSEC_NAT_T to enable NAT-Traversal support. This enables
561 # optional UDP encapsulation of ESP packets.
563 options IPSEC_NAT_T #NAT-T support, UDP encap of ESP
565 options IPX #IPX/SPX communications protocols
567 options NCP #NetWare Core protocol
569 options NETATALK #Appletalk communications protocols
570 options NETATALKDEBUG #Appletalk debugging
574 # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
576 options NETSMB #SMB/CIFS requester
578 # mchain library. It can be either loaded as KLD or compiled into kernel
581 # libalias library, performing NAT
588 # SCTP is a NEW transport protocol defined by
589 # RFC2960 updated by RFC3309 and RFC3758.. and
590 # soon to have a new base RFC and many many more
591 # extensions. This release supports all the extensions
592 # including many drafts (most about to become RFC's).
593 # It is the reference implementation of SCTP
594 # and is quite well tested.
596 # Note YOU MUST have both INET and INET6 defined.
597 # You don't have to enable V6, but SCTP is
598 # dual stacked and so far we have not torn apart
599 # the V6 and V4.. since an association can span
600 # both a V6 and V4 address at the SAME time :-)
603 # There are bunches of options:
604 # this one turns on all sorts of
605 # nastly printing that you can
606 # do. It's all controlled by a
607 # bit mask (settable by socket opt and
608 # by sysctl). Including will not cause
609 # logging until you set the bits.. but it
610 # can be quite verbose.. so without this
611 # option we don't do any of the tests for
612 # bits and prints.. which makes the code run
613 # faster.. if you are not debugging don't use.
616 # This option turns off the CRC32c checksum. Basically,
617 # you will not be able to talk to anyone else who
618 # has not done this. Its more for experimentation to
619 # see how much CPU the CRC32c really takes. Most new
620 # cards for TCP support checksum offload.. so this
621 # option gives you a "view" into what SCTP would be
622 # like with such an offload (which only exists in
623 # high in iSCSI boards so far). With the new
624 # splitting 8's algorithm its not as bad as it used
625 # to be.. but it does speed things up try only
626 # for in a captured lab environment :-)
627 options SCTP_WITH_NO_CSUM
631 # All that options after that turn on specific types of
632 # logging. You can monitor CWND growth, flight size
633 # and all sorts of things. Go look at the code and
634 # see. I have used this to produce interesting
635 # charts and graphs as well :->
637 # I have not yet committed the tools to get and print
638 # the logs, I will do that eventually .. before then
639 # if you want them send me an email rrs@freebsd.org
640 # You basically must have ktr(4) enabled for these
641 # and you then set the sysctl to turn on/off various
642 # logging bits. Use ktrdump(8) to pull the log and run
643 # it through a display program.. and graphs and other
646 options SCTP_LOCK_LOGGING
647 options SCTP_MBUF_LOGGING
648 options SCTP_MBCNT_LOGGING
649 options SCTP_PACKET_LOGGING
650 options SCTP_LTRACE_CHUNKS
651 options SCTP_LTRACE_ERRORS
654 # altq(9). Enable the base part of the hooks with the ALTQ option.
655 # Individual disciplines must be built into the base system and can not be
656 # loaded as modules at this point. ALTQ requires a stable TSC so if yours is
657 # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC
660 options ALTQ_CBQ # Class Based Queueing
661 options ALTQ_RED # Random Early Detection
662 options ALTQ_RIO # RED In/Out
663 options ALTQ_HFSC # Hierarchical Packet Scheduler
664 options ALTQ_CDNR # Traffic conditioner
665 options ALTQ_PRIQ # Priority Queueing
666 options ALTQ_NOPCC # Required if the TSC is unusable
669 # netgraph(4). Enable the base netgraph code with the NETGRAPH option.
670 # Individual node types can be enabled with the corresponding option
671 # listed below; however, this is not strictly necessary as netgraph
672 # will automatically load the corresponding KLD module if the node type
673 # is not already compiled into the kernel. Each type below has a
674 # corresponding man page, e.g., ng_async(8).
675 options NETGRAPH # netgraph(4) system
676 options NETGRAPH_DEBUG # enable extra debugging, this
677 # affects netgraph(4) and nodes
679 options NETGRAPH_ASYNC
680 options NETGRAPH_ATMLLC
681 options NETGRAPH_ATM_ATMPIF
682 options NETGRAPH_BLUETOOTH # ng_bluetooth(4)
683 options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4)
684 options NETGRAPH_BLUETOOTH_HCI # ng_hci(4)
685 options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4)
686 options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4)
687 options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4)
688 options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4)
690 options NETGRAPH_BRIDGE
692 options NETGRAPH_CISCO
693 options NETGRAPH_DEFLATE
694 options NETGRAPH_DEVICE
695 options NETGRAPH_ECHO
696 options NETGRAPH_EIFACE
697 options NETGRAPH_ETHER
699 options NETGRAPH_FRAME_RELAY
701 options NETGRAPH_GIF_DEMUX
702 options NETGRAPH_HOLE
703 options NETGRAPH_IFACE
704 options NETGRAPH_IP_INPUT
705 options NETGRAPH_IPFW
706 options NETGRAPH_KSOCKET
707 options NETGRAPH_L2TP
709 # MPPC compression requires proprietary files (not included)
710 #options NETGRAPH_MPPC_COMPRESSION
711 options NETGRAPH_MPPC_ENCRYPTION
712 options NETGRAPH_NETFLOW
714 options NETGRAPH_ONE2MANY
715 options NETGRAPH_PATCH
716 options NETGRAPH_PIPE
718 options NETGRAPH_PPPOE
719 options NETGRAPH_PPTPGRE
720 options NETGRAPH_PRED1
721 options NETGRAPH_RFC1490
722 options NETGRAPH_SOCKET
723 options NETGRAPH_SPLIT
724 options NETGRAPH_SPPP
726 options NETGRAPH_TCPMSS
730 options NETGRAPH_VLAN
732 # NgATM - Netgraph ATM
734 options NGATM_ATMBASE
740 device mn # Munich32x/Falc54 Nx64kbit/sec cards.
743 # Network interfaces:
744 # The `loop' device is MANDATORY when networking is enabled.
747 # The `ether' device provides generic code to handle
748 # Ethernets; it is MANDATORY when an Ethernet device driver is
749 # configured or token-ring is enabled.
752 # The `vlan' device implements the VLAN tagging of Ethernet frames
753 # according to IEEE 802.1Q.
756 # The `wlan' device provides generic code to support 802.11
757 # drivers, including host AP mode; it is MANDATORY for the wi,
758 # and ath drivers and will eventually be required by all 802.11 drivers.
760 options IEEE80211_DEBUG #enable debugging msgs
761 options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's
762 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
763 options IEEE80211_SUPPORT_TDMA #enable TDMA support
765 # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
766 # support for WEP, TKIP, and AES-CCMP crypto protocols optionally
767 # used with 802.11 devices that depend on the `wlan' module.
772 # The `wlan_xauth' device provides support for external (i.e. user-mode)
773 # authenticators for use with 802.11 drivers that use the `wlan'
774 # module and support 802.1x and/or WPA security protocols.
777 # The `wlan_acl' device provides a MAC-based access control mechanism
778 # for use with 802.11 drivers operating in ap mode and using the
780 # The 'wlan_amrr' device provides AMRR transmit rate control algorithm
787 # The `fddi' device provides generic code to support FDDI.
790 # The `arcnet' device provides generic code to support Arcnet.
793 # The `sppp' device serves a similar role for certain types
794 # of synchronous PPP links (like `cx', `ar').
797 # The `bpf' device enables the Berkeley Packet Filter. Be
798 # aware of the legal and administrative consequences of enabling this
799 # option. DHCP requires bpf.
802 # The `disc' device implements a minimal network interface,
803 # which throws away all packets sent and never receives any. It is
804 # included for testing and benchmarking purposes.
807 # The `epair' device implements a virtual back-to-back connected Ethernet
808 # like interface pair.
811 # The `edsc' device implements a minimal Ethernet interface,
812 # which discards all packets sent and receives none.
815 # The `tap' device is a pty-like virtual Ethernet interface
818 # The `tun' device implements (user-)ppp and nos-tun(8)
821 # The `gif' device implements IPv6 over IP4 tunneling,
822 # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
823 # IPv6 over IPv6 tunneling.
824 # The `gre' device implements two types of IP4 over IP4 tunneling:
825 # GRE and MOBILE, as specified in the RFC1701 and RFC2004.
826 # The XBONEHACK option allows the same pair of addresses to be configured on
827 # multiple gif interfaces.
832 # The `faith' device captures packets sent to it and diverts them
833 # to the IPv4/IPv6 translation daemon.
834 # The `stf' device implements 6to4 encapsulation.
838 # The `ef' device provides support for multiple ethernet frame types
839 # specified via ETHER_* options. See ef(4) for details.
841 options ETHER_II # enable Ethernet_II frame
842 options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
843 options ETHER_8022 # enable Ethernet_802.2 frame
844 options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
846 # The pf packet filter consists of three devices:
847 # The `pf' device provides /dev/pf and the firewall code itself.
848 # The `pflog' device provides the pflog0 interface which logs packets.
849 # The `pfsync' device provides the pfsync0 interface used for
850 # synchronization of firewall state tables (over the net).
858 # Common Address Redundancy Protocol. See carp(4) for more details.
864 # Link aggregation interface.
868 # Internet family options:
870 # MROUTING enables the kernel multicast packet forwarder, which works
871 # with mrouted and XORP.
873 # IPFIREWALL enables support for IP firewall construction, in
874 # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
875 # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
876 # limits the number of times a matching entry can be logged.
878 # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
879 # and if you do not add other rules during startup to allow access,
880 # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
881 # in /etc/rc.conf when first enabling this feature, then refining the
882 # firewall rules in /etc/rc.firewall after you've tested that the new kernel
883 # feature works properly.
885 # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
886 # allow everything. Use with care, if a cracker can crash your
887 # firewall machine, they can get to your protected machines. However,
888 # if you are using it as an as-needed filter for specific problems as
889 # they arise, then this may be for you. Changing the default to 'allow'
890 # means that you won't get stuck if the kernel and /sbin/ipfw binary get
893 # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It
894 # depends on IPFIREWALL if compiled into the kernel.
896 # IPFIREWALL_FORWARD enables changing of the packet destination either
897 # to do some sort of policy routing or transparent proxying. Used by
898 # ``ipfw forward''. All redirections apply to locally generated
899 # packets too. Because of this great care is required when
900 # crafting the ruleset.
902 # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires
905 # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
906 # packets without touching the TTL). This can be useful to hide firewalls
907 # from traceroute and similar tools.
909 # TCPDEBUG enables code which keeps traces of the TCP state machine
910 # for sockets with the SO_DEBUG option set, which can then be examined
911 # using the trpt(8) utility.
913 options MROUTING # Multicast routing
914 options IPFIREWALL #firewall
915 options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
916 options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
917 options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
918 options IPFIREWALL_FORWARD #packet destination changes
919 options IPFIREWALL_NAT #ipfw kernel nat support
920 options IPDIVERT #divert sockets
921 options IPFILTER #ipfilter support
922 options IPFILTER_LOG #ipfilter logging
923 options IPFILTER_LOOKUP #ipfilter pools
924 options IPFILTER_DEFAULT_BLOCK #block all packets by default
925 options IPSTEALTH #support for stealth forwarding
928 # The MBUF_STRESS_TEST option enables options which create
929 # various random failures / extreme cases related to mbuf
930 # functions. See mbuf(9) for a list of available test cases.
931 # MBUF_PROFILING enables code to profile the mbuf chains
932 # exiting the system (via participating interfaces) and
933 # return a logarithmic histogram of monitored parameters
934 # (e.g. packet size, wasted space, number of mbufs in chain).
935 options MBUF_STRESS_TEST
936 options MBUF_PROFILING
938 # Statically link in accept filters
939 options ACCEPT_FILTER_DATA
940 options ACCEPT_FILTER_DNS
941 options ACCEPT_FILTER_HTTP
943 # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
944 # carried in TCP option 19. This option is commonly used to protect
945 # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
946 # This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
947 # This requires the use of 'device crypto', 'options IPSEC'
948 # or 'device cryptodev'.
949 options TCP_SIGNATURE #include support for RFC 2385
951 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL
952 # as well. See dummynet(4) and ipfw(8) for more info. When you run
953 # DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve
954 # a smooth scheduling of the traffic.
957 # Zero copy sockets support. This enables "zero copy" for sending and
958 # receiving data via a socket. The send side works for any type of NIC,
959 # the receive side only works for NICs that support MTUs greater than the
960 # page size of your architecture and that support header splitting. See
961 # zero_copy(9) for more details.
962 options ZERO_COPY_SOCKETS
964 #####################################################################
968 # Only the root, /usr, and /tmp filesystems need be statically
969 # compiled; everything else will be automatically loaded at mount
970 # time. (Exception: the UFS family--- FFS --- cannot
971 # currently be demand-loaded.) Some people still prefer to statically
972 # compile other filesystems as well.
974 # NB: The PORTAL filesystem is known to be buggy, and WILL panic your
975 # system if you attempt to do anything with it. It is included here
976 # as an incentive for some enterprising soul to sit down and fix it.
977 # The UNION filesystem was known to be buggy in the past. It is now
978 # being actively maintained, although there are still some issues being
982 # One of these is mandatory:
983 options FFS #Fast filesystem
984 options NFSCLIENT #Network File System client
986 # The rest are optional:
987 options CD9660 #ISO 9660 filesystem
988 options FDESCFS #File descriptor filesystem
989 options HPFS #OS/2 File system
990 options MSDOSFS #MS DOS File System (FAT, FAT32)
991 options NFSSERVER #Network File System server
992 options NFSLOCKD #Network Lock Manager
993 options NFSCL #experimental NFS client with NFSv4
994 options NFSD #experimental NFS server with NFSv4
995 options KGSSAPI #Kernel GSSAPI implementation
997 # NT File System. Read-mostly, see mount_ntfs(8) for details.
998 # For a full read-write NTFS support consider sysutils/fusefs-ntfs
1002 options NULLFS #NULL filesystem
1003 # Broken (depends on NCP):
1004 #options NWFS #NetWare filesystem
1005 options PORTALFS #Portal filesystem
1006 options PROCFS #Process filesystem (requires PSEUDOFS)
1007 options PSEUDOFS #Pseudo-filesystem framework
1008 options PSEUDOFS_TRACE #Debugging support for PSEUDOFS
1009 options SMBFS #SMB/CIFS filesystem
1010 options TMPFS #Efficient memory filesystem
1011 options UDF #Universal Disk Format
1012 options UNIONFS #Union filesystem
1013 # The xFS_ROOT options REQUIRE the associated ``options xFS''
1014 options NFS_ROOT #NFS usable as root device
1016 # Soft updates is a technique for improving filesystem speed and
1017 # making abrupt shutdown less risky.
1021 # Extended attributes allow additional data to be associated with files,
1022 # and is used for ACLs, Capabilities, and MAC labels.
1023 # See src/sys/ufs/ufs/README.extattr for more information.
1025 options UFS_EXTATTR_AUTOSTART
1027 # Access Control List support for UFS filesystems. The current ACL
1028 # implementation requires extended attribute support, UFS_EXTATTR,
1029 # for the underlying filesystem.
1030 # See src/sys/ufs/ufs/README.acls for more information.
1033 # Directory hashing improves the speed of operations on very large
1034 # directories at the expense of some memory.
1037 # Gjournal-based UFS journaling support.
1038 options UFS_GJOURNAL
1040 # Make space in the kernel for a root filesystem on a md device.
1041 # Define to the number of kilobytes to reserve for the filesystem.
1042 options MD_ROOT_SIZE=10
1044 # Make the md device a potential root device, either with preloaded
1045 # images of type mfs_root or md_root.
1048 # Disk quotas are supported when this option is enabled.
1049 options QUOTA #enable disk quotas
1051 # If you are running a machine just as a fileserver for PC and MAC
1052 # users, using SAMBA or Netatalk, you may consider setting this option
1053 # and keeping all those users' directories on a filesystem that is
1054 # mounted with the suiddir option. This gives new files the same
1055 # ownership as the directory (similar to group). It's a security hole
1056 # if you let these users run programs, so confine it to file-servers
1057 # (but it'll save you lots of headaches in those cases). Root owned
1058 # directories are exempt and X bits are cleared. The suid bit must be
1059 # set on the directory as well; see chmod(1). PC owners can't see/set
1060 # ownerships so they keep getting their toes trodden on. This saves
1061 # you all the support calls as the filesystem it's used on will act as
1062 # they expect: "It's my dir so it must be my file".
1067 options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
1068 options NFS_MAXATTRTIMO=60
1069 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
1070 options NFS_MAXDIRATTRTIMO=60
1071 options NFS_GATHERDELAY=10 # Default write gather delay (msec)
1072 options NFS_WDELAYHASHSIZ=16 # and with this
1073 options NFS_DEBUG # Enable NFS Debugging
1076 options CODA #CODA filesystem.
1077 device vcoda #coda minicache <-> venus comm.
1078 # Use the old Coda 5.x venus<->kernel interface instead of the new
1079 # realms-aware 6.x protocol.
1080 #options CODA_COMPAT_5
1083 # Add support for the EXT2FS filesystem of Linux fame. Be a bit
1084 # careful with this - the ext2fs code has a tendency to lag behind
1085 # changes and not be exercised very much, so mounting read/write could
1086 # be dangerous (and even mounting read only could result in panics.)
1091 # Add support for the ReiserFS filesystem (used in Linux). Currently,
1092 # this is limited to read-only access.
1097 # Add support for the SGI XFS filesystem. Currently,
1098 # this is limited to read-only access.
1102 # Use real implementations of the aio_* system calls. There are numerous
1103 # stability and security issues in the current aio code that make it
1104 # unsuitable for inclusion on machines with untrusted local users.
1107 # Cryptographically secure random number generator; /dev/random
1110 # The system memory devices; /dev/mem, /dev/kmem
1113 # The kernel symbol table device; /dev/ksyms
1116 # Optional character code conversion support with LIBICONV.
1117 # Each option requires their base file system and LIBICONV.
1118 options CD9660_ICONV
1119 options MSDOSFS_ICONV
1124 #####################################################################
1127 # Real time extensions added in the 1993 POSIX
1128 # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
1130 options _KPOSIX_PRIORITY_SCHEDULING
1131 # p1003_1b_semaphores are very experimental,
1132 # user should be ready to assist in debugging if problems arise.
1133 options P1003_1B_SEMAPHORES
1135 # POSIX message queue
1136 options P1003_1B_MQUEUE
1138 #####################################################################
1139 # SECURITY POLICY PARAMETERS
1141 # Support for BSM audit
1144 # Support for Mandatory Access Control (MAC):
1147 options MAC_BSDEXTENDED
1152 options MAC_PARTITION
1154 options MAC_SEEOTHERUIDS
1158 # Support for Capsicum
1159 options CAPABILITIES # fine-grained rights on file descriptors
1160 options CAPABILITY_MODE # sandboxes with no global namespace access
1162 # Support for process descriptors
1166 #####################################################################
1169 # The granularity of operation is controlled by the kernel option HZ whose
1170 # default value (1000 on most architectures) means a granularity of 1ms
1171 # (1s/HZ). Historically, the default was 100, but finer granularity is
1172 # required for DUMMYNET and other systems on modern hardware. There are
1173 # reasonable arguments that HZ should, in fact, be 100 still; consider,
1174 # that reducing the granularity too much might cause excessive overhead in
1175 # clock interrupt processing, potentially causing ticks to be missed and thus
1176 # actually reducing the accuracy of operation.
1180 # Enable support for the kernel PLL to use an external PPS signal,
1181 # under supervision of [x]ntpd(8)
1182 # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1187 #####################################################################
1190 # SCSI DEVICE CONFIGURATION
1192 # The SCSI subsystem consists of the `base' SCSI code, a number of
1193 # high-level SCSI device `type' drivers, and the low-level host-adapter
1194 # device drivers. The host adapters are listed in the ISA and PCI
1195 # device configuration sections below.
1197 # It is possible to wire down your SCSI devices so that a given bus,
1198 # target, and LUN always come on line as the same device unit. In
1199 # earlier versions the unit numbers were assigned in the order that
1200 # the devices were probed on the SCSI bus. This means that if you
1201 # removed a disk drive, you may have had to rewrite your /etc/fstab
1202 # file, and also that you had to be careful when adding a new disk
1203 # as it may have been probed earlier and moved your device configuration
1204 # around. (See also option GEOM_VOL for a different solution to this
1207 # This old behavior is maintained as the default behavior. The unit
1208 # assignment begins with the first non-wired down unit for a device
1209 # type. For example, if you wire a disk as "da3" then the first
1210 # non-wired disk will be assigned da4.
1212 # The syntax for wiring down devices is:
1214 hint.scbus.0.at="ahc0"
1215 hint.scbus.1.at="ahc1"
1216 hint.scbus.1.bus="0"
1217 hint.scbus.3.at="ahc2"
1218 hint.scbus.3.bus="0"
1219 hint.scbus.2.at="ahc2"
1220 hint.scbus.2.bus="1"
1221 hint.da.0.at="scbus0"
1222 hint.da.0.target="0"
1224 hint.da.1.at="scbus3"
1225 hint.da.1.target="1"
1226 hint.da.2.at="scbus2"
1227 hint.da.2.target="3"
1228 hint.sa.1.at="scbus1"
1229 hint.sa.1.target="6"
1231 # "units" (SCSI logical unit number) that are not specified are
1232 # treated as if specified as LUN 0.
1234 # All SCSI devices allocate as many units as are required.
1236 # The ch driver drives SCSI Media Changer ("jukebox") devices.
1238 # The da driver drives SCSI Direct Access ("disk") and Optical Media
1241 # The sa driver drives SCSI Sequential Access ("tape") devices.
1243 # The cd driver drives SCSI Read Only Direct Access ("cd") devices.
1245 # The ses driver drives SCSI Environment Services ("ses") and
1246 # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices.
1248 # The pt driver drives SCSI Processor devices.
1250 # The sg driver provides a passthrough API that is compatible with the
1251 # Linux SG driver. It will work in conjunction with the COMPAT_LINUX
1252 # option to run linux SG apps. It can also stand on its own and provide
1253 # source level API compatiblity for porting apps to FreeBSD.
1255 # Target Mode support is provided here but also requires that a SIM
1256 # (SCSI Host Adapter Driver) provide support as well.
1258 # The targ driver provides target mode support as a Processor type device.
1259 # It exists to give the minimal context necessary to respond to Inquiry
1260 # commands. There is a sample user application that shows how the rest
1261 # of the command support might be done in /usr/share/examples/scsi_target.
1263 # The targbh driver provides target mode support and exists to respond
1264 # to incoming commands that do not otherwise have a logical unit assigned
1267 # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
1268 # configuration as the "pass" driver.
1270 device scbus #base SCSI code
1271 device ch #SCSI media changers
1272 device da #SCSI direct access devices (aka disks)
1273 device sa #SCSI tapes
1274 device cd #SCSI CD-ROMs
1275 device ses #SCSI Environmental Services (and SAF-TE)
1276 device pt #SCSI processor
1277 device targ #SCSI Target Mode Code
1278 device targbh #SCSI Target Mode Blackhole Device
1279 device pass #CAM passthrough driver
1280 device sg #Linux SCSI passthrough
1283 # debugging options:
1284 # -- NOTE -- If you specify one of the bus/target/lun options, you must
1286 # CAMDEBUG: When defined enables debugging macros
1287 # CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
1288 # CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
1289 # CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
1290 # CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
1291 # CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
1293 # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
1294 # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
1295 # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
1296 # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
1297 # queue after a bus reset, and the number of milliseconds to
1298 # freeze the device queue after a bus device reset. This
1299 # can be changed at boot and runtime with the
1300 # kern.cam.scsi_delay tunable/sysctl.
1302 options CAM_DEBUG_BUS=-1
1303 options CAM_DEBUG_TARGET=-1
1304 options CAM_DEBUG_LUN=-1
1305 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
1306 options CAM_MAX_HIGHPOWER=4
1307 options SCSI_NO_SENSE_STRINGS
1308 options SCSI_NO_OP_STRINGS
1309 options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device
1311 # Options for the CAM CDROM driver:
1312 # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
1313 # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
1314 # enforced if there is I/O waiting for another LUN
1315 # The compiled in defaults for these variables are 2 and 10 seconds,
1318 # These can also be changed on the fly with the following sysctl variables:
1319 # kern.cam.cd.changer.min_busy_seconds
1320 # kern.cam.cd.changer.max_busy_seconds
1322 options CHANGER_MIN_BUSY_SECONDS=2
1323 options CHANGER_MAX_BUSY_SECONDS=10
1325 # Options for the CAM sequential access driver:
1326 # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
1327 # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
1328 # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
1329 # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
1330 # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
1331 options SA_IO_TIMEOUT=4
1332 options SA_SPACE_TIMEOUT=60
1333 options SA_REWIND_TIMEOUT=(2*60)
1334 options SA_ERASE_TIMEOUT=(4*60)
1335 options SA_1FM_AT_EOD
1337 # Optional timeout for the CAM processor target (pt) device
1338 # This is specified in seconds. The default is 60 seconds.
1339 options SCSI_PT_DEFAULT_TIMEOUT=60
1341 # Optional enable of doing SES passthrough on other devices (e.g., disks)
1343 # Normally disabled because a lot of newer SCSI disks report themselves
1344 # as having SES capabilities, but this can then clot up attempts to build
1345 # a topology with the SES device that's on the box these drives are in....
1346 options SES_ENABLE_PASSTHROUGH
1349 #####################################################################
1350 # MISCELLANEOUS DEVICES AND OPTIONS
1352 device pty #BSD-style compatibility pseudo ttys
1353 device nmdm #back-to-back tty devices
1354 device md #Memory/malloc disk
1355 device snp #Snoop device - to look at pty/vty/etc..
1356 device ccd #Concatenated disk driver
1357 device firmware #firmware(9) support
1359 # Kernel side iconv library
1362 # Size of the kernel message buffer. Should be N * pagesize.
1363 options MSGBUF_SIZE=40960
1366 #####################################################################
1367 # HARDWARE DEVICE CONFIGURATION
1369 # For ISA the required hints are listed.
1370 # EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so
1371 # no hints are needed.
1374 # Mandatory devices:
1377 # These options are valid for other keyboard drivers as well.
1378 options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
1379 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
1381 options FB_DEBUG # Frame buffer debugging
1383 device splash # Splash screen and screen saver support
1385 # Various screen savers.
1398 # The syscons console driver (SCO color console compatible).
1401 options MAXCONS=16 # number of virtual consoles
1402 options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
1403 options SC_DFLT_FONT # compile font in
1404 makeoptions SC_DFLT_FONT=cp850
1405 options SC_DISABLE_KDBKEY # disable `debug' key
1406 options SC_DISABLE_REBOOT # disable reboot key sequence
1407 options SC_HISTORY_SIZE=200 # number of history buffer lines
1408 options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
1409 options SC_PIXEL_MODE # add support for the raster text mode
1411 # The following options will let you change the default colors of syscons.
1412 options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
1413 options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
1414 options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
1415 options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
1417 # The following options will let you change the default behaviour of
1418 # cut-n-paste feature
1419 options SC_CUT_SPACES2TABS # convert leading spaces into tabs
1420 options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words
1421 # (default is single space - \"x20\")
1423 # If you have a two button mouse, you may want to add the following option
1424 # to use the right button of the mouse to paste text.
1425 options SC_TWOBUTTON_MOUSE
1427 # You can selectively disable features in syscons.
1428 options SC_NO_CUTPASTE
1429 options SC_NO_FONT_LOADING
1430 options SC_NO_HISTORY
1431 options SC_NO_MODE_CHANGE
1432 options SC_NO_SYSMOUSE
1433 options SC_NO_SUSPEND_VTYSWITCH
1436 # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode
1437 # 0x100 Probe for a keyboard device periodically if one is not present
1439 # Enable experimental features of the syscons terminal emulator (teken).
1440 options TEKEN_CONS25 # cons25-style terminal emulation
1441 options TEKEN_UTF8 # UTF-8 output handling
1448 # SCSI host adapters:
1450 # adv: All Narrow SCSI bus AdvanSys controllers.
1451 # adw: Second Generation AdvanSys controllers including the ADV940UW.
1452 # aha: Adaptec 154x/1535/1640
1453 # ahb: Adaptec 174x EISA controllers
1454 # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
1455 # 19160x/29160x, aic7770/aic78xx
1456 # ahd: Adaptec 29320/39320 Controllers.
1457 # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
1458 # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
1459 # such as the Tekram DC-390(T).
1460 # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
1461 # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
1462 # esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers
1463 # including the AMD Am53C974 (found on devices such as the Tekram
1464 # DC-390(T)) and the Sun ESP and FAS families of controllers
1465 # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
1466 # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
1467 # ISP 12160 Ultra3 SCSI,
1468 # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters.
1469 # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters.
1470 # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters.
1471 # ispfw: Firmware module for Qlogic host adapters
1472 # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4
1473 # or FC9x9 Fibre Channel host adapters.
1474 # ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
1475 # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
1476 # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875,
1477 # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
1478 # 53C1010-33, 53C1010-66.
1479 # trm: Tekram DC395U/UW/F DC315U adapters.
1483 # Note that the order is important in order for Buslogic ISA/EISA cards to be
1488 hint.bt.0.port="0x330"
1501 device iscsi_initiator
1503 hint.isp.0.disable="1"
1505 hint.isp.0.prefer_iomap="1"
1506 hint.isp.0.prefer_memmap="1"
1507 hint.isp.0.fwload_disable="1"
1508 hint.isp.0.ignore_nvram="1"
1509 hint.isp.0.fullduplex="1"
1510 hint.isp.0.topology="lport"
1511 hint.isp.0.topology="nport"
1512 hint.isp.0.topology="lport-only"
1513 hint.isp.0.topology="nport-only"
1514 # we can't get u_int64_t types, nor can we get strings if it's got
1515 # a leading 0x, hence this silly dodge.
1516 hint.isp.0.portwnn="w50000000aaaa0000"
1517 hint.isp.0.nodewnn="w50000000aaaa0001"
1525 hint.wds.0.port="0x350"
1529 # The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1530 # controllers that have it configured only if this option is set. Unfortunately,
1531 # this doesn't work on some motherboards, which prevents it from being the
1533 options AHC_ALLOW_MEMIO
1535 # Dump the contents of the ahc controller configuration PROM.
1536 options AHC_DUMP_EEPROM
1538 # Bitmap of units to enable targetmode operations.
1539 options AHC_TMODE_ENABLE
1541 # Compile in Aic7xxx Debugging code.
1544 # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h
1545 options AHC_DEBUG_OPTS
1547 # Print register bitfields in debug output. Adds ~128k to driver
1549 options AHC_REG_PRETTY_PRINT
1551 # Compile in aic79xx debugging code.
1554 # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4).
1555 options AHD_DEBUG_OPTS=0xFFFFFFFF
1557 # Print human-readable register definitions when debugging
1558 options AHD_REG_PRETTY_PRINT
1560 # Bitmap of units to enable targetmode operations.
1561 options AHD_TMODE_ENABLE
1563 # The adw driver will attempt to use memory mapped I/O for all PCI
1564 # controllers that have it configured only if this option is set.
1565 options ADW_ALLOW_MEMIO
1567 # Options used in dev/iscsi (Software iSCSI stack)
1569 options ISCSI_INITIATOR_DEBUG=9
1571 # Options used in dev/isp/ (Qlogic SCSI/FC driver).
1573 # ISP_TARGET_MODE - enable target mode operation
1575 options ISP_TARGET_MODE=1
1577 # ISP_DEFAULT_ROLES - default role
1581 # both=3 (not supported currently)
1583 # ISP_INTERNAL_TARGET (trivial internal disk target, for testing)
1585 options ISP_DEFAULT_ROLES=2
1587 # Options used in dev/sym/ (Symbios SCSI driver).
1588 #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1589 # Allows the ncr to take precedence
1590 # 1 (1<<0) -> 810a, 860
1591 # 2 (1<<1) -> 825a, 875, 885, 895
1592 # 4 (1<<2) -> 895a, 896, 1510d
1593 #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1594 # disabled:0 (default), enabled:1
1595 #options SYM_SETUP_PCI_PARITY #-PCI parity checking
1596 # disabled:0, enabled:1 (default)
1597 #options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1598 # default:8, range:[1..64]
1600 # The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
1601 # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1602 # The DPT controllers are commonly re-licensed under other brand-names -
1603 # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1604 # Compaq are actually DPT controllers.
1606 # See src/sys/dev/dpt for debugging and other subtle options.
1607 # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1608 # instruments are enabled. The tools in
1609 # /usr/sbin/dpt_* assume these to be enabled.
1610 # DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
1611 # If you want the driver to handle timeouts, enable
1612 # this option. If your system is very busy, this
1613 # option will create more trouble than solve.
1614 # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
1615 # wait when timing out with the above option.
1616 # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
1617 # DPT_LOST_IRQ When enabled, will try, once per second, to catch
1618 # any interrupt that got lost. Seems to help in some
1619 # DPT-firmware/Motherboard combinations. Minimal
1620 # cost, great benefit.
1621 # DPT_RESET_HBA Make "reset" actually reset the controller
1622 # instead of fudging it. Only enable this if you
1623 # are 100% certain you need it.
1628 #!CAM# options DPT_MEASURE_PERFORMANCE
1629 #!CAM# options DPT_HANDLE_TIMEOUTS
1630 options DPT_TIMEOUT_FACTOR=4
1631 options DPT_LOST_IRQ
1632 options DPT_RESET_HBA
1635 # Compaq "CISS" RAID controllers (SmartRAID 5* series)
1636 # These controllers have a SCSI-like interface, and require the
1637 # CAM infrastructure.
1642 # Intel Integrated RAID controllers.
1643 # This driver was developed and is maintained by Intel. Contacts
1644 # at Intel for this driver are
1645 # "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
1646 # "Leubner, Achim" <achim.leubner@intel.com>.
1651 # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
1652 # firmware. These controllers have a SCSI-like interface, and require
1653 # the CAM infrastructure.
1658 # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1659 # one entry is needed; the code will find and configure all supported
1662 device ida # Compaq Smart RAID
1663 device mlx # Mylex DAC960
1664 device amr # AMI MegaRAID
1665 device amrp # SCSI Passthrough interface (optional, CAM req.)
1666 device mfi # LSI MegaRAID SAS
1667 device mfip # LSI MegaRAID SAS passthrough, requires CAM
1673 device twe # 3ware ATA RAID
1676 # Serial ATA host controllers:
1678 # ahci: Advanced Host Controller Interface (AHCI) compatible
1679 # mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers
1680 # siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers
1682 # These drivers are part of cam(4) subsystem. They supersede less featured
1683 # ata(4) subsystem drivers, supporting same hardware.
1690 # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
1691 # devices. You only need one "device ata" for it to find all
1692 # PCI and PC Card ATA/ATAPI devices on modern machines.
1693 # Alternatively, individual bus and chipset drivers may be chosen by using
1694 # the 'atacore' driver then selecting the drivers on a per vendor basis.
1695 # For example to build a system which only supports a VIA chipset,
1696 # omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers.
1698 device atadisk # ATA disk drives
1699 device ataraid # ATA RAID drives
1700 device atapicd # ATAPI CDROM drives
1701 device atapifd # ATAPI floppy drives
1702 device atapist # ATAPI tape drives
1703 device atapicam # emulate ATAPI devices as SCSI ditto via CAM
1704 # needs CAM to be present (scbus & pass)
1707 #device atacore # Core ATA functionality
1708 #device atacard # CARDBUS support
1709 #device atabus # PC98 cbus support
1710 #device ataisa # ISA bus support
1711 #device atapci # PCI bus support; only generic chipset support
1714 #device ataahci # AHCI SATA
1715 #device ataacard # ACARD
1716 #device ataacerlabs # Acer Labs Inc. (ALI)
1717 #device ataadaptec # Adaptec
1718 #device ataamd # American Micro Devices (AMD)
1719 #device ataati # ATI
1720 #device atacenatek # Cenatek
1721 #device atacypress # Cypress
1722 #device atacyrix # Cyrix
1723 #device atahighpoint # HighPoint
1724 #device ataintel # Intel
1725 #device ataite # Integrated Technology Inc. (ITE)
1726 #device atajmicron # JMicron
1727 #device atamarvell # Marvell
1728 #device atamicron # Micron
1729 #device atanational # National
1730 #device atanetcell # NetCell
1731 #device atanvidia # nVidia
1732 #device atapromise # Promise
1733 #device ataserverworks # ServerWorks
1734 #device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD)
1735 #device atasis # Silicon Integrated Systems Corp.(SiS)
1736 #device atavia # VIA Technologies Inc.
1739 # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
1741 hint.ata.0.port="0x1f0"
1744 hint.ata.1.port="0x170"
1748 # The following options are valid on the ATA driver:
1750 # ATA_STATIC_ID: controller numbering is static ie depends on location
1751 # else the device numbers are dynamically allocated.
1752 # ATA_REQUEST_TIMEOUT: the number of seconds to wait for an ATA request
1753 # before timing out.
1754 # ATA_CAM: Turn ata(4) subsystem controller drivers into cam(4)
1755 # interface modules. This deprecates all ata(4)
1756 # peripheral device drivers (atadisk, ataraid, atapicd,
1757 # atapifd, atapist, atapicam) and all user-level APIs.
1758 # cam(4) drivers and APIs will be connected instead.
1760 options ATA_STATIC_ID
1761 #options ATA_REQUEST_TIMEOUT=10
1765 # Standard floppy disk controllers and floppy tapes, supports
1766 # the Y-E DATA External FDD (PC Card)
1770 hint.fdc.0.port="0x3F0"
1774 # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1775 # gotta turn it actually on by setting the variable fd_debug with DDB,
1779 # Activate this line if you happen to have an Insight floppy tape.
1780 # Probing them proved to be dangerous for people with floppy disks only,
1781 # so it's "hidden" behind a flag:
1782 #hint.fdc.0.flags="1"
1784 # Specify floppy devices
1791 # uart: newbusified driver for serial interfaces. It consolidates the sio(4),
1792 # sab(4) and zs(4) drivers.
1796 # Options for uart(4)
1797 options UART_PPS_ON_CTS # Do time pulse capturing using CTS
1800 # The following hint should only be used for pure ISA devices. It is not
1801 # needed otherwise. Use of hints is strongly discouraged.
1802 hint.uart.0.at="isa"
1804 # The following 3 hints are used when the UART is a system device (i.e., a
1805 # console or debug port), but only on platforms that don't have any other
1806 # means to pass the information to the kernel. The unit number of the hint
1807 # is only used to bundle the hints together. There is no relation to the
1808 # unit number of the probed UART.
1809 hint.uart.0.port="0x3f8"
1810 hint.uart.0.flags="0x10"
1811 hint.uart.0.baud="115200"
1813 # `flags' for serial drivers that support consoles like sio(4) and uart(4):
1814 # 0x10 enable console support for this unit. Other console flags
1815 # (if applicable) are ignored unless this is set. Enabling
1816 # console support does not make the unit the preferred console.
1817 # Boot with -h or set boot_serial=YES in the loader. For sio(4)
1818 # specifically, the 0x20 flag can also be set (see above).
1819 # Currently, at most one unit can have console support; the
1820 # first one (in config file order) with this flag set is
1821 # preferred. Setting this flag for sio0 gives the old behaviour.
1822 # 0x80 use this port for serial line gdb support in ddb. Also known
1826 # Options for serial drivers that support consoles:
1827 options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to
1828 # ddb, if available.
1830 # Solaris implements a new BREAK which is initiated by a character
1831 # sequence CR ~ ^b which is similar to a familiar pattern used on
1832 # Sun servers by the Remote Console. There are FreeBSD extensions:
1833 # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot.
1834 options ALT_BREAK_TO_DEBUGGER
1836 # Serial Communications Controller
1837 # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel
1838 # communications controllers.
1841 # PCI Universal Communications driver
1842 # Supports various multi port PCI I/O cards.
1846 # Network interfaces:
1848 # MII bus support is required for many PCI Ethernet NICs,
1849 # namely those which use MII-compliant transceivers or implement
1850 # transceiver control interfaces that operate like an MII. Adding
1851 # "device miibus" to the kernel config pulls in support for the generic
1852 # miibus API, the common support for for bit-bang'ing the MII and all
1853 # of the PHY drivers, including a generic one for PHYs that aren't
1854 # specifically handled by an individual driver. Support for specific
1855 # PHYs may be built by adding "device mii", "device mii_bitbang" if
1856 # needed by the NIC driver and then adding the appropriate PHY driver.
1857 device mii # Minimal MII support
1858 device mii_bitbang # Common module for bit-bang'ing the MII
1859 device miibus # MII support w/ bit-bang'ing and all PHYs
1861 device acphy # Altima Communications AC101
1862 device amphy # AMD AM79c873 / Davicom DM910{1,2}
1863 device atphy # Attansic/Atheros F1
1864 device axphy # Asix Semiconductor AX88x9x
1865 device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C
1866 device brgphy # Broadcom BCM54xx/57xx 1000baseTX
1867 device ciphy # Cicada/Vitesse CS/VSC8xxx
1868 device e1000phy # Marvell 88E1000 1000/100/10-BT
1869 device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces
1870 device icsphy # ICS ICS1889-1893
1871 device ip1000phy # IC Plus IP1000A/IP1001
1872 device jmphy # JMicron JMP211/JMP202
1873 device lxtphy # Level One LXT-970
1874 device mlphy # Micro Linear 6692
1875 device nsgphy # NatSemi DP8361/DP83865/DP83891
1876 device nsphy # NatSemi DP83840A
1877 device nsphyter # NatSemi DP83843/DP83815
1878 device pnaphy # HomePNA
1879 device qsphy # Quality Semiconductor QS6612
1880 device rdcphy # RDC Semiconductor R6040
1881 device rgephy # RealTek 8169S/8110S/8211B/8211C
1882 device rlphy # RealTek 8139
1883 device rlswitch # RealTek 8305
1884 device smcphy # SMSC LAN91C111
1885 device tdkphy # TDK 89Q2120
1886 device tlphy # Texas Instruments ThunderLAN
1887 device truephy # LSI TruePHY
1888 device xmphy # XaQti XMAC II
1890 # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1891 # PCI and ISA varieties.
1892 # ae: Support for gigabit ethernet adapters based on the Attansic/Atheros
1893 # L2 PCI-Express FastEthernet controllers.
1894 # age: Support for gigabit ethernet adapters based on the Attansic/Atheros
1895 # L1 PCI express gigabit ethernet controllers.
1896 # alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers.
1897 # ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers.
1898 # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan)
1899 # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet
1901 # bfe: Broadcom BCM4401 Ethernet adapter.
1902 # bge: Support for gigabit ethernet adapters based on the Broadcom
1903 # BCM570x family of controllers, including the 3Com 3c996-T,
1904 # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
1905 # the embedded gigE NICs on Dell PowerEdge 2550 servers.
1906 # bxe: Broadcom NetXtreme II (BCM57710/57711/57711E) PCIe 10b Ethernet
1908 # bwi: Broadcom BCM430* and BCM431* family of wireless adapters.
1909 # bwn: Broadcom BCM43xx family of wireless adapters.
1910 # cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn
1911 # cm: Arcnet SMC COM90c26 / SMC COM90c56
1912 # (and SMC COM90c66 in '56 compatibility mode) adapters.
1913 # cxgbe: Support for PCI express 10Gb/1Gb adapters based on the Chelsio T4
1914 # (Terminator 4) ASIC.
1915 # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1916 # and various workalikes including:
1917 # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1918 # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1919 # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1920 # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1921 # replaces the old al, ax, dm, pn and mx drivers. List of brands:
1922 # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1923 # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1924 # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1926 # de: Digital Equipment DC21040
1927 # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
1928 # igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters.
1929 # ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
1930 # and PC Card devices using these chipsets.
1931 # ex: Intel EtherExpress Pro/10 and other i82595-based adapters,
1932 # Olicom Ethernet PC Card devices.
1933 # fe: Fujitsu MB86960A/MB86965A Ethernet
1934 # fea: DEC DEFEA EISA FDDI adapter
1935 # fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
1936 # fxp: Intel EtherExpress Pro/100B
1937 # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping)
1938 # gem: Apple GMAC/Sun ERI/Sun GEM
1939 # hme: Sun HME (Happy Meal Ethernet)
1940 # jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters.
1941 # le: AMD Am7900 LANCE and Am79C9xx PCnet
1942 # lge: Support for PCI gigabit ethernet adapters based on the Level 1
1943 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX,
1944 # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1945 # malo: Marvell Libertas wireless NICs.
1946 # mwl: Marvell 88W8363 802.11n wireless NICs.
1947 # msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect
1948 # Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061,
1949 # 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053,
1950 # 88E8055, 88E8056 and D-Link 560T/550SX.
1951 # lmc: Support for the LMC/SBE wide-area network interface cards.
1952 # my: Myson Fast Ethernet (MTD80X, MTD89X)
1953 # nge: Support for PCI gigabit ethernet adapters based on the National
1954 # Semiconductor DP83820 and DP83821 chipset. This includes the
1955 # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet
1956 # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom
1957 # EP-320G-TX and the Netgear GA622T.
1958 # pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x
1959 # PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home
1960 # chipsets. These can also be handled by the le(4) driver if the
1961 # pcn(4) driver is left out of the kernel. The le(4) driver does not
1962 # support the additional features like the MII bus and burst mode of
1963 # the PCnet-FAST and greater chipsets though.
1964 # ral: Ralink Technology IEEE 802.11 wireless adapter
1965 # re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter
1966 # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139
1967 # chipset. Note that the RealTek driver defaults to using programmed
1968 # I/O to do register accesses because memory mapped mode seems to cause
1969 # severe lockups on SMP hardware. This driver also supports the
1970 # Accton EN1207D `Cheetah' adapter, which uses a chip called
1971 # the MPX 5030/5038, which is either a RealTek in disguise or a
1972 # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek
1973 # chipset and is supported by this driver, not the 'vr' driver.
1974 # sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the
1975 # Adaptec AIC-6915 "starfire" controller.
1976 # This includes dual and quad port cards, as well as one 100baseFX card.
1977 # Most of these are 64-bit PCI devices, except for one single port
1978 # card which is 32-bit.
1979 # sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter
1980 # sis: Support for NICs based on the Silicon Integrated Systems SiS 900,
1981 # SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
1982 # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
1983 # This includes the SK-9841 and SK-9842 single port cards (single mode
1984 # and multimode fiber) and the SK-9843 and SK-9844 dual port cards
1985 # (also single mode and multimode).
1986 # The driver will autodetect the number of ports on the card and
1987 # attach each one as a separate network interface.
1988 # sn: Support for ISA and PC Card Ethernet devices using the
1989 # SMC91C90/92/94/95 chips.
1990 # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes
1991 # the D-Link DFE-550TX.
1992 # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack
1993 # TC9021 family of controllers, including the Sundance ST2021/ST2023,
1994 # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101.
1995 # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks
1996 # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the
1997 # 3Com 3c985, the Netgear GA620 and various others. Note that you will
1998 # probably want to bump up kern.ipc.nmbclusters a lot to use this driver.
1999 # tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN'
2000 # cards and integrated ethernet controllers. This includes several
2001 # Compaq Netelligent 10/100 cards and the built-in ethernet controllers
2002 # in several Compaq Prosignia, Proliant and Deskpro systems. It also
2003 # supports several Olicom 10Mbps and 10/100 boards.
2004 # tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series)
2005 # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset
2006 # vr: Support for various fast ethernet adapters based on the VIA
2007 # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
2008 # including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for
2009 # DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320.
2010 # vte: DM&P Vortex86 RDC R6040 Fast Ethernet
2011 # vx: 3Com 3C590 and 3C595
2012 # wb: Support for fast ethernet adapters based on the Winbond W89C840F chip.
2013 # Note: this is not the same as the Winbond W89C940F, which is a
2015 # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
2016 # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
2017 # bridge with a PCMCIA adapter plugged into it.
2018 # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
2019 # Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
2020 # Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
2021 # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
2022 # Etherlink XL cards and integrated controllers. This includes the
2023 # integrated 3c905B-TX chips in certain Dell Optiplex and Dell
2024 # Precision desktop machines and the integrated 3c905-TX chips
2025 # in Dell Latitude laptop docking stations.
2026 # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
2028 # Order for ISA/EISA devices is important here
2032 hint.cm.0.port="0x2e0"
2034 hint.cm.0.maddr="0xdc000"
2039 hint.fe.0.port="0x300"
2043 hint.sn.0.port="0x300"
2049 # PCI Ethernet NICs that use the common MII bus controller code.
2050 device ae # Attansic/Atheros L2 FastEthernet
2051 device age # Attansic/Atheros L1 Gigabit Ethernet
2052 device alc # Atheros AR8131/AR8132 Ethernet
2053 device ale # Atheros AR8121/AR8113/AR8114 Ethernet
2054 device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
2055 device bfe # Broadcom BCM440x 10/100 Ethernet
2056 device bge # Broadcom BCM570xx Gigabit Ethernet
2057 device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
2058 device cxgb # Chelsio T3 10 Gigabit Ethernet
2059 device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware
2060 device dc # DEC/Intel 21143 and various workalikes
2061 device et # Agere ET1310 10/100/Gigabit Ethernet
2062 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
2063 hint.fxp.0.prefer_iomap="0"
2064 device gem # Apple GMAC/Sun ERI/Sun GEM
2065 device hme # Sun HME (Happy Meal Ethernet)
2066 device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
2067 device lge # Level 1 LXT1001 gigabit Ethernet
2068 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
2069 device my # Myson Fast Ethernet (MTD80X, MTD89X)
2070 device nge # NatSemi DP83820 gigabit Ethernet
2071 device re # RealTek 8139C+/8169/8169S/8110S
2072 device rl # RealTek 8129/8139
2073 device pcn # AMD Am79C97x PCI 10/100 NICs
2074 device sf # Adaptec AIC-6915 (``Starfire'')
2075 device sge # Silicon Integrated Systems SiS190/191
2076 device sis # Silicon Integrated Systems SiS 900/SiS 7016
2077 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
2078 device ste # Sundance ST201 (D-Link DFE-550TX)
2079 device stge # Sundance/Tamarack TC9021 gigabit Ethernet
2080 device tl # Texas Instruments ThunderLAN
2081 device tx # SMC EtherPower II (83c170 ``EPIC'')
2082 device vr # VIA Rhine, Rhine II
2083 device vte # DM&P Vortex86 RDC R6040 Fast Ethernet
2084 device wb # Winbond W89C840F
2085 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
2087 # PCI Ethernet NICs.
2088 device bxe # Broadcom BCM57710/BCM57711/BCM57711E 10Gb Ethernet
2089 device cxgbe # Chelsio T4 10GbE PCIe adapter
2090 device de # DEC/Intel DC21x4x (``Tulip'')
2091 device em # Intel Pro/1000 Gigabit Ethernet
2092 device igb # Intel Pro/1000 PCIE Gigabit Ethernet
2093 device ixgb # Intel Pro/10Gbe PCI-X Ethernet
2094 device ixgbe # Intel Pro/10Gbe PCIE Ethernet
2095 device le # AMD Am7900 LANCE and Am79C9xx PCnet
2096 device mxge # Myricom Myri-10G 10GbE NIC
2097 device nxge # Neterion Xframe 10GbE Server/Storage Adapter
2098 device ti # Alteon Networks Tigon I/II gigabit Ethernet
2099 device txp # 3Com 3cR990 (``Typhoon'')
2100 device vx # 3Com 3c590, 3c595 (``Vortex'')
2101 device vxge # Exar/Neterion XFrame 3100 10GbE
2109 # PCI IEEE 802.11 Wireless NICs
2110 device ath # Atheros pci/cardbus NIC's
2111 device ath_hal # pci/cardbus chip support
2112 #device ath_ar5210 # AR5210 chips
2113 #device ath_ar5211 # AR5211 chips
2114 #device ath_ar5212 # AR5212 chips
2121 #device ath_ar5416 # AR5416 chips
2122 options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
2123 # All of the AR5212 parts have a problem when paired with the AR71xx
2124 # CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx
2125 # only. Details of the exact nature of the bug are sketchy, but some can be
2126 # found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and
2127 # 6. This option enables this workaround. There is a performance penalty
2128 # for this work around, but without it things don't work at all. The DMA
2129 # from the card usually bursts 128 bytes, but on the affected CPUs, only
2131 options AH_RXCFG_SDMAMW_4BYTES
2132 #device ath_ar9160 # AR9160 chips
2133 #device ath_ar9280 # AR9280 chips
2134 #device ath_ar9285 # AR9285 chips
2135 device ath_rate_sample # SampleRate tx rate control for ath
2136 device bwi # Broadcom BCM430* BCM431*
2137 device bwn # Broadcom BCM43xx
2138 device malo # Marvell Libertas wireless NICs.
2139 device mwl # Marvell 88W8363 802.11n wireless NICs.
2140 device ral # Ralink Technology RT2500 wireless NICs.
2142 # Use "private" jumbo buffers allocated exclusively for the ti(4) driver.
2143 # This option is incompatible with the TI_JUMBO_HDRSPLIT option below.
2144 #options TI_PRIVATE_JUMBOS
2145 # Turn on the header splitting option for the ti(4) driver firmware. This
2146 # only works for Tigon II chips, and has no effect for Tigon I chips.
2147 options TI_JUMBO_HDRSPLIT
2150 # Use header splitting feature on bce(4) adapters.
2151 # This may help to reduce the amount of jumbo-sized memory buffers used.
2153 options BCE_JUMBO_HDRSPLIT
2155 # These two options allow manipulating the mbuf cluster size and mbuf size,
2156 # respectively. Be very careful with NIC driver modules when changing
2157 # these from their default values, because that can potentially cause a
2158 # mismatch between the mbuf size assumed by the kernel and the mbuf size
2159 # assumed by a module. The only driver that currently has the ability to
2160 # detect a mismatch is ti(4).
2161 options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB
2162 options MSIZE=512 # mbuf size in bytes
2165 # ATM related options (Cranor version)
2166 # (note: this driver cannot be used with the HARP ATM stack)
2168 # The `en' device provides support for Efficient Networks (ENI)
2169 # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
2171 # The `hatm' device provides support for Fore/Marconi HE155 and HE622
2174 # The `fatm' device provides support for Fore PCA200E ATM PCI cards.
2176 # The `patm' device provides support for IDT77252 based cards like
2177 # ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards.
2179 # atm device provides generic atm functions and is required for
2181 # NATM enables the netnatm protocol family that can be used to
2184 # utopia provides the access to the ATM PHY chips and is required for en,
2187 # the current driver supports only PVC operations (no atm-arp, no multicast).
2188 # for more details, please read the original documents at
2189 # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
2193 device fatm #Fore PCA200E
2194 device hatm #Fore/Marconi HE155/622
2195 device patm #IDT77252 cards (ProATM and IDT)
2196 device utopia #ATM PHY driver
2197 options NATM #native ATM
2199 options LIBMBPOOL #needed by patm, iatm
2204 # sound: The generic sound driver.
2210 # snd_*: Device-specific drivers.
2212 # The flags of the device tell the device a bit more info about the
2213 # device that normally is obtained through the PnP interface.
2214 # bit 2..0 secondary DMA channel;
2215 # bit 4 set if the board uses two dma channels;
2216 # bit 15..8 board type, overrides autodetection; leave it
2217 # zero if don't know what to put in (and you don't,
2218 # since this is unsupported at the moment...).
2220 # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP.
2221 # snd_als4000: Avance Logic ALS4000 PCI.
2222 # snd_atiixp: ATI IXP 200/300/400 PCI.
2223 # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only
2225 # snd_cmi: CMedia CMI8338/CMI8738 PCI.
2226 # snd_cs4281: Crystal Semiconductor CS4281 PCI.
2227 # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except
2229 # snd_ds1: Yamaha DS-1 PCI.
2230 # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI.
2231 # snd_emu10kx: Creative SoundBlaster Live! and Audigy
2232 # snd_envy24: VIA Envy24 and compatible, needs snd_spicds.
2233 # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds.
2234 # snd_es137x: Ensoniq AudioPCI ES137x PCI.
2235 # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in
2236 # conjunction with snd_sbc.
2237 # snd_fm801: Forte Media FM801 PCI.
2238 # snd_gusc: Gravis UltraSound ISA PnP/non-PnP.
2239 # snd_hda: Intel High Definition Audio (Controller) and
2241 # snd_ich: Intel ICH AC'97 and some more audio controllers
2242 # embedded in a chipset, for example nVidia
2243 # nForce controllers.
2244 # snd_maestro: ESS Technology Maestro-1/2x PCI.
2245 # snd_maestro3: ESS Technology Maestro-3/Allegro PCI.
2246 # snd_mss: Microsoft Sound System ISA PnP/non-PnP.
2247 # snd_neomagic: Neomagic 256 AV/ZX PCI.
2248 # snd_sb16: Creative SoundBlaster16, to be used in
2249 # conjunction with snd_sbc.
2250 # snd_sb8: Creative SoundBlaster (pre-16), to be used in
2251 # conjunction with snd_sbc.
2252 # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP.
2253 # Supports ESS and Avance ISA chips as well.
2254 # snd_solo: ESS Solo-1x PCI.
2255 # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers.
2256 # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs
2258 # snd_uaudio: USB audio.
2259 # snd_via8233: VIA VT8233x PCI.
2260 # snd_via82c686: VIA VT82C686A PCI.
2261 # snd_vibes: S3 Sonicvibes PCI.
2293 device snd_via82c686
2296 # For non-PnP sound cards:
2300 hint.pcm.0.flags="0x0"
2302 hint.sbc.0.port="0x220"
2305 hint.sbc.0.flags="0x15"
2306 hint.gusc.0.at="isa"
2307 hint.gusc.0.port="0x220"
2310 hint.gusc.0.flags="0x13"
2313 # Following options are intended for debugging/testing purposes:
2315 # SND_DEBUG Enable extra debugging code that includes
2316 # sanity checking and possible increase of
2319 # SND_DIAGNOSTIC Simmilar in a spirit of INVARIANTS/DIAGNOSTIC,
2320 # zero tolerance against inconsistencies.
2322 # SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled
2323 # in. This options enable most feeder converters
2324 # except for 8bit. WARNING: May bloat the kernel.
2326 # SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well.
2328 # SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic
2329 # as much as possible (the default trying to
2330 # avoid it). Possible slowdown.
2332 # SND_PCM_64 (Only applicable for i386/32bit arch)
2333 # Process 32bit samples through 64bit
2334 # integer/arithmetic. Slight increase of dynamic
2335 # range at a cost of possible slowdown.
2337 # SND_OLDSTEREO Only 2 channels are allowed, effectively
2338 # disabling multichannel processing.
2341 options SND_DIAGNOSTIC
2342 options SND_FEEDER_MULTIFORMAT
2343 options SND_FEEDER_FULL_MULTIFORMAT
2344 options SND_FEEDER_RATE_HP
2346 options SND_OLDSTEREO
2349 # IEEE-488 hardware:
2350 # pcii: PCIIA cards (uPD7210 based isa cards)
2351 # tnt4882: National Instruments PCI-GPIB card.
2354 hint.pcii.0.at="isa"
2355 hint.pcii.0.port="0x2e1"
2362 # Miscellaneous hardware:
2364 # scd: Sony CD-ROM using proprietary (non-ATAPI) interface
2365 # mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface
2366 # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
2367 # joy: joystick (including IO DATA PCJOY PC Card joystick)
2368 # cmx: OmniKey CardMan 4040 pccard smartcard reader
2373 hint.mcd.0.port="0x300"
2374 # for the Sony CDU31/33A CDROM
2377 hint.scd.0.port="0x230"
2378 device joy # PnP aware, hints for non-PnP only
2380 hint.joy.0.port="0x201"
2384 # The 'bktr' device is a PCI video capture device using the Brooktree
2385 # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
2386 # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
2387 # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
2389 # options OVERRIDE_CARD=xxx
2390 # options OVERRIDE_TUNER=xxx
2391 # options OVERRIDE_MSP=1
2392 # options OVERRIDE_DBX=1
2393 # These options can be used to override the auto detection
2394 # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
2395 # Using sysctl(8) run-time overrides on a per-card basis can be made
2397 # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
2399 # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
2400 # Specifies the default video capture mode.
2401 # This is required for Dual Crystal (28&35Mhz) boards where PAL is used
2402 # to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI.
2404 # options BKTR_USE_PLL
2405 # This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
2406 # crystal, e.g. some new Bt878 cards.
2408 # options BKTR_GPIO_ACCESS
2409 # This enables IOCTLs which give user level access to the GPIO port.
2411 # options BKTR_NO_MSP_RESET
2412 # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
2414 # options BKTR_430_FX_MODE
2415 # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
2417 # options BKTR_SIS_VIA_MODE
2418 # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
2419 # needed for some old SiS and VIA chipset motherboards.
2420 # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
2421 # motherboards and motherboards with bad or incomplete PCI 2.1 support.
2422 # As a rough guess, old = before 1998
2424 # options BKTR_NEW_MSP34XX_DRIVER
2425 # Use new, more complete initialization scheme for the msp34* soundchip.
2426 # Should fix stereo autodetection if the old driver does only output
2430 # options BKTR_USE_FREEBSD_SMBUS
2431 # Compile with FreeBSD SMBus implementation
2433 # Brooktree driver has been ported to the new I2C framework. Thus,
2434 # you'll need to have the following 3 lines in the kernel config.
2439 # The iic and smb devices are only needed if you want to control other
2440 # I2C slaves connected to the external connector of some cards.
2445 # PC Card/PCMCIA and Cardbus
2447 # cbb: pci/cardbus bridge implementing YENTA interface
2448 # pccard: pccard slots
2449 # cardbus: cardbus slots
2458 # mmcsd MMC/SD memory card
2459 # sdhci Generic PCI SD Host Controller
2468 # System Management Bus support is provided by the 'smbus' device.
2469 # Access to the SMBus device is via the 'smb' device (/dev/smb*),
2470 # which is a child of the 'smbus' device.
2472 # Supported devices:
2473 # smb standard I/O through /dev/smb*
2475 # Supported SMB interfaces:
2476 # iicsmb I2C to SMB bridge with any iicbus interface
2477 # bktr brooktree848 I2C hardware interface
2478 # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
2479 # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
2480 # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
2481 # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit
2482 # amdpm AMD 756 Power Management Unit
2483 # amdsmb AMD 8111 SMBus 2.0 Controller
2484 # nfpm NVIDIA nForce Power Management Unit
2485 # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
2487 device smbus # Bus support, required for smb below.
2503 # Philips i2c bus support is provided by the `iicbus' device.
2505 # Supported devices:
2506 # ic i2c network interface
2507 # iic i2c standard io
2508 # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
2510 # Supported interfaces:
2511 # bktr brooktree848 I2C software interface
2514 # iicbb generic I2C bit-banging code (needed by lpbb, bktr)
2516 device iicbus # Bus support, required for ic/iic/iicsmb below.
2521 device iicsmb # smb over i2c bridge
2523 # I2C peripheral devices
2525 # ds133x Dallas Semiconductor DS1337, DS1338 and DS1339 RTC
2526 # ds1672 Dallas Semiconductor DS1672 RTC
2533 # Parallel port bus support is provided by the `ppbus' device.
2534 # Multiple devices may be attached to the parallel port, devices
2535 # are automatically probed and attached when found.
2537 # Supported devices:
2538 # vpo Iomega Zip Drive
2539 # Requires SCSI disk support ('scbus' and 'da'), best
2540 # performance is achieved with ports in EPP 1.9 mode.
2541 # lpt Parallel Printer
2542 # plip Parallel network interface
2543 # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
2544 # pps Pulse per second Timing Interface
2545 # lpbb Philips official parallel port I2C bit-banging interface
2546 # pcfclock Parallel port clock driver.
2548 # Supported interfaces:
2549 # ppc ISA-bus parallel port interfaces.
2552 options PPC_PROBE_CHIPSET # Enable chipset specific detection
2553 # (see flags in ppc(4))
2554 options DEBUG_1284 # IEEE1284 signaling protocol debug
2555 options PERIPH_1284 # Makes your computer act as an IEEE1284
2556 # compliant peripheral
2557 options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
2558 options VP0_DEBUG # ZIP/ZIP+ debug
2559 options LPT_DEBUG # Printer driver debug
2560 options PPC_DEBUG # Parallel chipset level debug
2561 options PLIP_DEBUG # Parallel network IP interface debug
2562 options PCFCLOCK_VERBOSE # Verbose pcfclock driver
2563 options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
2577 # Kernel BOOTP support
2579 options BOOTP # Use BOOTP to obtain IP address/hostname
2580 # Requires NFSCLIENT and NFS_ROOT
2581 options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
2582 options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
2583 options BOOTP_COMPAT # Workaround for broken bootp daemons.
2584 options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2585 options BOOTP_BLOCKSIZE=8192 # Override NFS block size
2588 # Add software watchdog routines.
2593 # Add the software deadlock resolver thread.
2598 # Disable swapping of stack pages. This option removes all
2599 # code which actually performs swapping, so it's not possible to turn
2600 # it back on at run-time.
2602 # This is sometimes usable for systems which don't have any swap space
2603 # (see also sysctls "vm.defer_swapspace_pageouts" and
2604 # "vm.disable_swapspace_pageouts")
2606 #options NO_SWAPPING
2608 # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
2609 # for sendfile(2) that are used to map file VM pages, and normally
2610 # default to a quantity that is roughly 16*MAXUSERS+512. You would
2611 # typically want about 4 of these for each simultaneous file send.
2613 options NSFBUFS=1024
2616 # Enable extra debugging code for locks. This stores the filename and
2617 # line of whatever acquired the lock in the lock itself, and changes a
2618 # number of function calls to pass around the relevant data. This is
2619 # not at all useful unless you are debugging lock code. Also note
2620 # that it is likely to break e.g. fstat(1) unless you recompile your
2621 # userland with -DDEBUG_LOCKS as well.
2626 #####################################################################
2638 # General USB code (mandatory for USB)
2641 # USB Double Bulk Pipe devices
2645 # Human Interface Device (anything with buttons and dials)
2651 # USB mass storage driver (Requires scbus and da)
2653 # USB mass storage driver for device-side mode
2655 # USB support for Belkin F5U109 and Magic Control Technology serial adapters
2661 # eGalax USB touch screen
2663 # Diamond Rio 500 MP3 player
2666 # USB serial support
2668 # USB support for 3G modem cards by Option, Novatel, Huawei and Sierra
2670 # USB support for Technologies ARK3116 based serial adapters
2672 # USB support for Belkin F5U103 and compatible serial adapters
2674 # USB support for serial adapters based on the FT8U100AX and FT8U232AM
2676 # USB support for some Windows CE based serial communication.
2678 # USB support for Prolific PL-2303 serial adapters
2680 # USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters
2682 # USB Visor and Palm devices
2684 # USB serial support for DDI pocket's PHS
2687 # ADMtek USB ethernet. Supports the LinkSys USB100TX,
2688 # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2689 # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2693 # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2694 # LinkSys USB200M and various other adapters.
2698 # Devices which communicate using Ethernet over USB, particularly
2699 # Communication Device Class (CDC) Ethernet specification. Supports
2700 # Sharp Zaurus PDAs, some DOCSIS cable modems and so on.
2703 # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2704 # and Netmate II, and the Belkin F5U111.
2707 # Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2708 # Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2709 # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2710 # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2711 # and 2104USB, and the Corega USB-T.
2714 # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX
2715 # and the GREEN HOUSE GH-USB100B.
2718 # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC.
2721 # Moschip MCS7730/MCS7840 USB to fast ethernet. Supports the Sitecom LN030.
2724 # HSxPA devices from Option N.V
2728 # Ralink Technology RT2501USB/RT2601USB wireless driver
2730 # Ralink Technology RT2700U/RT2800U/RT3000U wireless driver
2733 # Atheros AR5523 wireless driver
2736 # Conexant/Intersil PrismGT wireless driver
2739 # Ralink Technology RT2500USB wireless driver
2742 # Realtek RTL8187B/L wireless driver
2745 # ZyDas ZD1211/ZD1211B wireless driver
2749 # debugging options for the USB subsystem
2755 options UKBD_DFLT_KEYMAP # specify the built-in keymap
2756 makeoptions UKBD_DFLT_KEYMAP=it.iso
2758 # options for uplcom:
2759 options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval
2762 # options for uvscom:
2763 options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size
2764 options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval
2767 #####################################################################
2770 device firewire # FireWire bus code
2771 device sbp # SCSI over Firewire (Requires scbus and da)
2772 device sbp_targ # SBP-2 Target mode (Requires scbus and targ)
2773 device fwe # Ethernet over FireWire (non-standard!)
2774 device fwip # IP over FireWire (RFC2734 and RFC3146)
2776 #####################################################################
2777 # dcons support (Dumb Console Device)
2779 device dcons # dumb console driver
2780 device dcons_crom # FireWire attachment
2781 options DCONS_BUF_SIZE=16384 # buffer size
2782 options DCONS_POLL_HZ=100 # polling rate
2783 options DCONS_FORCE_CONSOLE=0 # force to be the primary console
2784 options DCONS_FORCE_GDB=1 # force to be the gdb device
2786 #####################################################################
2789 # This is a port of the OpenBSD crypto framework. Include this when
2790 # configuring IPSEC and when you have a h/w crypto device to accelerate
2791 # user applications that link to OpenSSL.
2793 # Drivers are ports from OpenBSD with some simple enhancements that have
2794 # been fed back to OpenBSD.
2796 device crypto # core crypto support
2797 device cryptodev # /dev/crypto for access to h/w
2799 device rndtest # FIPS 140-2 entropy tester
2801 device hifn # Hifn 7951, 7781, etc.
2802 options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2803 options HIFN_RNDTEST # enable rndtest support
2805 device ubsec # Broadcom 5501, 5601, 58xx
2806 options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2807 options UBSEC_RNDTEST # enable rndtest support
2809 #####################################################################
2813 # Embedded system options:
2815 # An embedded system might want to run something other than init.
2816 options INIT_PATH=/sbin/init:/stand/sysinstall
2819 options BUS_DEBUG # enable newbus debugging
2820 options DEBUG_VFS_LOCKS # enable VFS lock debugging
2821 options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking
2826 # Make the SYSINIT process performed by mi_startup() verbose. This is very
2827 # useful when porting to a new architecture. If DDB is also enabled, this
2828 # will print function names instead of addresses.
2829 options VERBOSE_SYSINIT
2831 #####################################################################
2832 # SYSV IPC KERNEL PARAMETERS
2834 # Maximum number of System V semaphores that can be used on the system at
2838 # Total number of semaphores system wide
2841 # Total number of undo structures in system
2844 # Maximum number of System V semaphores that can be used by a single process
2848 # Maximum number of operations that can be outstanding on a single System V
2849 # semaphore at one time.
2852 # Maximum number of undo operations that can be outstanding on a single
2853 # System V semaphore at one time.
2856 # Maximum number of shared memory pages system wide.
2859 # Maximum size, in bytes, of a single System V shared memory region.
2860 options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
2861 options SHMMAXPGS=1025
2863 # Minimum size, in bytes, of a single System V shared memory region.
2866 # Maximum number of shared memory regions that can be used on the system
2870 # Maximum number of System V shared memory regions that can be attached to
2871 # a single process at one time.
2874 # Compress user core dumps.
2875 options COMPRESS_USER_CORES
2876 # required to compress file output from kernel for COMPRESS_USER_CORES.
2879 # Set the amount of time (in seconds) the system will wait before
2880 # rebooting automatically when a kernel panic occurs. If set to (-1),
2881 # the system will wait indefinitely until a key is pressed on the
2883 options PANIC_REBOOT_WAIT_TIME=16
2885 # Attempt to bypass the buffer cache and put data directly into the
2886 # userland buffer for read operation when O_DIRECT flag is set on the
2887 # file. Both offset and length of the read operation must be
2888 # multiples of the physical media sector size.
2892 # Specify a lower limit for the number of swap I/O buffers. They are
2893 # (among other things) used when bypassing the buffer cache due to
2894 # DIRECTIO kernel option enabled and O_DIRECT flag set on file.
2896 options NSWBUF_MIN=120
2898 #####################################################################
2900 # More undocumented options for linting.
2901 # Note that documenting these is not considered an affront.
2903 options CAM_DEBUG_DELAY
2905 # VFS cluster debugging.
2906 options CLUSTERDEBUG
2910 # Kernel filelock debugging.
2913 # System V compatible message queues
2914 # Please note that the values provided here are used to test kernel
2915 # building. The defaults in the sources provide almost the same numbers.
2916 # MSGSSZ must be a power of 2 between 8 and 1024.
2917 options MSGMNB=2049 # Max number of chars in queue
2918 options MSGMNI=41 # Max number of message queue identifiers
2919 options MSGSEG=2049 # Max number of message segments
2920 options MSGSSZ=16 # Size of a message segment
2921 options MSGTQL=41 # Max number of messages in system
2923 options NBUF=512 # Number of buffer headers
2925 options SCSI_NCR_DEBUG
2926 options SCSI_NCR_MAX_SYNC=10000
2927 options SCSI_NCR_MAX_WIDE=1
2928 options SCSI_NCR_MYADDR=7
2930 options SC_DEBUG_LEVEL=5 # Syscons debug level
2931 options SC_RENDER_DEBUG # syscons rendering debugging
2933 options VFS_BIO_DEBUG # VFS buffer I/O debugging
2935 options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack
2937 # Adaptec Array Controller driver options
2938 options AAC_DEBUG # Debugging levels:
2939 # 0 - quiet, only emit warnings
2940 # 1 - noisy, emit major function
2941 # points and things done
2942 # 2 - extremely noisy, emit trace
2943 # items in loops, etc.
2945 # Resource Accounting
2951 # Yet more undocumented options for linting.
2952 # BKTR_ALLOC_PAGES has no effect except to cause warnings, and
2953 # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the
2954 # driver still mostly spells this option BROOKTREE_ALLOC_PAGES.
2955 ##options BKTR_ALLOC_PAGES=(217*4+1)
2956 options BROOKTREE_ALLOC_PAGES=(217*4+1)
2957 options MAXFILES=999