3 # NOTES -- Lines that can be cut/pasted into kernel and hints configs.
5 # Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
6 # 'makeoptions', 'hints', etc. go into the kernel configuration that you
9 # Lines that begin with 'hint.' are NOT for config(8), they go into your
10 # hints file. See /boot/device.hints and/or the 'hints' config(8) directive.
12 # Please use ``make LINT'' to create an old-style LINT file if you want to
13 # do kernel test-builds.
15 # This file contains machine independent kernel configuration notes. For
16 # machine dependent notes, look in /sys/<arch>/conf/NOTES.
20 # NOTES conventions and style guide:
22 # Large block comments should begin and end with a line containing only a
25 # To describe a particular object, a block comment (if it exists) should
26 # come first. Next should come device, options, and hints lines in that
27 # order. All device and option lines must be described by a comment that
28 # doesn't just expand the device or option name. Use only a concise
29 # comment on the same line if possible. Very detailed descriptions of
30 # devices and subsystems belong in man pages.
32 # A space followed by a tab separates 'options' from an option name. Two
33 # spaces followed by a tab separate 'device' from a device name. Comments
34 # after an option or device should use one space after the comment character.
35 # To comment out a negative option that disables code and thus should not be
36 # enabled for LINT builds, precede 'options' with "#!".
40 # This is the ``identification'' of the kernel. Usually this should
41 # be the same as the name of your kernel.
46 # The `maxusers' parameter controls the static sizing of a number of
47 # internal system tables by a formula defined in subr_param.c.
48 # Omitting this parameter or setting it to 0 will cause the system to
49 # auto-size based on physical memory.
53 # To statically compile in device wiring instead of /boot/device.hints
54 #hints "LINT.hints" # Default places to look for devices.
56 # Use the following to compile in values accessible to the kernel
57 # through getenv() (or kenv(1) in userland). The format of the file
58 # is 'variable=value', see kenv(1)
63 # The `makeoptions' parameter allows variables to be passed to the
64 # generated Makefile in the build area.
66 # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
67 # after most other flags. Here we use it to inhibit use of non-optimal
68 # gcc built-in functions (e.g., memcmp).
70 # DEBUG happens to be magic.
71 # The following is equivalent to 'config -g KERNELNAME' and creates
72 # 'kernel.debug' compiled with -g debugging as well as a normal
73 # 'kernel'. Use 'make install.debug' to install the debug kernel
74 # but that isn't normally necessary as the debug symbols are not loaded
75 # by the kernel and are not useful there anyway.
77 # KERNEL can be overridden so that you can change the default name of your
80 # MODULES_OVERRIDE can be used to limit modules built to a specific list.
82 makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
83 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
84 #makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
85 # Only build ext2fs module plus those parts of the sound system I need.
86 #makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3"
87 makeoptions DESTDIR=/tmp
90 # FreeBSD processes are subject to certain limits to their consumption
91 # of system resources. See getrlimit(2) for more details. Each
92 # resource limit has two values, a "soft" limit and a "hard" limit.
93 # The soft limits can be modified during normal system operation, but
94 # the hard limits are set at boot time. Their default values are
95 # in sys/<arch>/include/vmparam.h. There are two ways to change them:
97 # 1. Set the values at kernel build time. The options below are one
98 # way to allow that limit to grow to 1GB. They can be increased
99 # further by changing the parameters:
101 # 2. In /boot/loader.conf, set the tunables kern.maxswzone,
102 # kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz,
103 # kern.dflssiz, kern.maxssiz and kern.sgrowsiz.
105 # The options in /boot/loader.conf override anything in the kernel
106 # configuration file. See the function init_param1 in
107 # sys/kern/subr_param.c for more details.
110 options MAXDSIZ=(1024UL*1024*1024)
111 options MAXSSIZ=(128UL*1024*1024)
112 options DFLDSIZ=(1024UL*1024*1024)
115 # BLKDEV_IOSIZE sets the default block size used in user block
116 # device I/O. Note that this value will be overridden by the label
117 # when specifying a block device from a label with a non-0
118 # partition blocksize. The default is PAGE_SIZE.
120 options BLKDEV_IOSIZE=8192
123 # MAXPHYS and DFLTPHYS
125 # These are the maximal and safe 'raw' I/O block device access sizes.
126 # Reads and writes will be split into MAXPHYS chunks for known good
127 # devices and DFLTPHYS for the rest. Some applications have better
128 # performance with larger raw I/O access sizes. Note that certain VM
129 # parameters are derived from these values and making them too large
130 # can make an an unbootable kernel.
132 # The defaults are 64K and 128K respectively.
133 options DFLTPHYS=(64*1024)
134 options MAXPHYS=(128*1024)
137 # This allows you to actually store this configuration file into
138 # the kernel binary itself. See config(8) for more details.
140 options INCLUDE_CONFIG_FILE # Include this file in kernel
142 options GEOM_AES # Don't use, use GEOM_BDE
143 options GEOM_BDE # Disk encryption.
144 options GEOM_BSD # BSD disklabels
145 options GEOM_CACHE # Disk cache.
146 options GEOM_CONCAT # Disk concatenation.
147 options GEOM_ELI # Disk encryption.
148 options GEOM_FOX # Redundant path mitigation
149 options GEOM_GATE # Userland services.
150 options GEOM_JOURNAL # Journaling.
151 options GEOM_LABEL # Providers labelization.
152 options GEOM_LINUX_LVM # Linux LVM2 volumes
153 options GEOM_MBR # DOS/MBR partitioning
154 options GEOM_MIRROR # Disk mirroring.
155 options GEOM_MULTIPATH # Disk multipath
156 options GEOM_NOP # Test class.
157 options GEOM_PART_APM # Apple partitioning
158 options GEOM_PART_BSD # BSD disklabel
159 options GEOM_PART_EBR # Extended Boot Records
160 options GEOM_PART_EBR_COMPAT # Backward compatible partition names
161 options GEOM_PART_GPT # GPT partitioning
162 options GEOM_PART_LDM # Logical Disk Manager
163 options GEOM_PART_MBR # MBR partitioning
164 options GEOM_PART_PC98 # PC-9800 disk partitioning
165 options GEOM_PART_VTOC8 # SMI VTOC8 disk label
166 options GEOM_PC98 # NEC PC9800 partitioning
167 options GEOM_RAID # Soft RAID functionality.
168 options GEOM_RAID3 # RAID3 functionality.
169 options GEOM_SHSEC # Shared secret.
170 options GEOM_STRIPE # Disk striping.
171 options GEOM_SUNLABEL # Sun/Solaris partitioning
172 options GEOM_UZIP # Read-only compressed disks
173 options GEOM_VINUM # Vinum logical volume manager
174 options GEOM_VIRSTOR # Virtual storage.
175 options GEOM_VOL # Volume names from UFS superblock
176 options GEOM_ZERO # Performance testing helper.
179 # The root device and filesystem type can be compiled in;
180 # this provides a fallback option if the root device cannot
181 # be correctly guessed by the bootstrap code, or an override if
182 # the RB_DFLTROOT flag (-r) is specified when booting the kernel.
184 options ROOTDEVNAME=\"ufs:da0s2e\"
187 #####################################################################
190 # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options
191 # select which scheduler is compiled in.
193 # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run
194 # queue and no CPU affinity which makes it suboptimal for SMP. It has very
195 # good interactivity and priority selection.
197 # SCHED_ULE provides significant performance advantages over 4BSD on many
198 # workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues
199 # and scheduler locks. It also has a stronger notion of interactivity
200 # which leads to better responsiveness even on uniprocessor machines. This
201 # is the default scheduler.
203 # SCHED_STATS is a debugging option which keeps some stats in the sysctl
204 # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions.
210 #####################################################################
213 # SMP enables building of a Symmetric MultiProcessor Kernel.
216 options SMP # Symmetric MultiProcessor Kernel
218 # MAXCPU defines the maximum number of CPUs that can boot in the system.
219 # A default value should be already present, for every architecture.
222 # ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin
223 # if the thread that currently owns the mutex is executing on another
224 # CPU. This behaviour is enabled by default, so this option can be used
226 options NO_ADAPTIVE_MUTEXES
228 # ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin
229 # if the thread that currently owns the rwlock is executing on another
230 # CPU. This behaviour is enabled by default, so this option can be used
232 options NO_ADAPTIVE_RWLOCKS
234 # ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that
235 # currently owns the sx lock is executing on another CPU.
236 # This behaviour is enabled by default, so this option can be used to
238 options NO_ADAPTIVE_SX
240 # MUTEX_NOINLINE forces mutex operations to call functions to perform each
241 # operation rather than inlining the simple cases. This can be used to
242 # shrink the size of the kernel text segment. Note that this behavior is
243 # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
244 # and WITNESS options.
245 options MUTEX_NOINLINE
247 # RWLOCK_NOINLINE forces rwlock operations to call functions to perform each
248 # operation rather than inlining the simple cases. This can be used to
249 # shrink the size of the kernel text segment. Note that this behavior is
250 # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
251 # and WITNESS options.
252 options RWLOCK_NOINLINE
254 # SX_NOINLINE forces sx lock operations to call functions to perform each
255 # operation rather than inlining the simple cases. This can be used to
256 # shrink the size of the kernel text segment. Note that this behavior is
257 # already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
258 # and WITNESS options.
261 # SMP Debugging Options:
263 # PREEMPTION allows the threads that are in the kernel to be preempted by
264 # higher priority [interrupt] threads. It helps with interactivity
265 # and allows interrupt threads to run sooner rather than waiting.
266 # WARNING! Only tested on amd64 and i386.
267 # FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel
268 # threads. Its sole use is to expose race conditions and other
269 # bugs during development. Enabling this option will reduce
270 # performance and increase the frequency of kernel panics by
271 # design. If you aren't sure that you need it then you don't.
272 # Relies on the PREEMPTION option. DON'T TURN THIS ON.
273 # MUTEX_DEBUG enables various extra assertions in the mutex code.
274 # SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table
275 # used to hold active sleep queues as well as sleep wait message
277 # TURNSTILE_PROFILING enables rudimentary profiling of the hash table
278 # used to hold active lock queues.
279 # UMTX_PROFILING enables rudimentary profiling of the hash table used
280 to hold active lock queues.
281 # WITNESS enables the witness code which detects deadlocks and cycles
282 # during locking operations.
283 # WITNESS_KDB causes the witness code to drop into the kernel debugger if
284 # a lock hierarchy violation occurs or if locks are held when going to
286 # WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
288 options FULL_PREEMPTION
292 options WITNESS_SKIPSPIN
294 # LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details.
295 options LOCK_PROFILING
296 # Set the number of buffers and the hash size. The hash size MUST be larger
297 # than the number of buffers. Hash size should be prime.
298 options MPROF_BUFFERS="1536"
299 options MPROF_HASH_SIZE="1543"
301 # Profiling for internal hash tables.
302 options SLEEPQUEUE_PROFILING
303 options TURNSTILE_PROFILING
304 options UMTX_PROFILING
307 #####################################################################
308 # COMPATIBILITY OPTIONS
311 # Implement system calls compatible with 4.3BSD and older versions of
312 # FreeBSD. You probably do NOT want to remove this as much current code
313 # still relies on the 4.3 emulation. Note that some architectures that
314 # are supported by FreeBSD do not include support for certain important
315 # aspects of this compatibility option, namely those related to the
316 # signal delivery mechanism.
323 # Note that as a general rule, COMPAT_FREEBSD<n> depends on
324 # COMPAT_FREEBSD<n+1>, COMPAT_FREEBSD<n+2>, etc.
326 # Enable FreeBSD4 compatibility syscalls
327 options COMPAT_FREEBSD4
329 # Enable FreeBSD5 compatibility syscalls
330 options COMPAT_FREEBSD5
332 # Enable FreeBSD6 compatibility syscalls
333 options COMPAT_FREEBSD6
335 # Enable FreeBSD7 compatibility syscalls
336 options COMPAT_FREEBSD7
339 # These three options provide support for System V Interface
340 # Definition-style interprocess communication, in the form of shared
341 # memory, semaphores, and message queues, respectively.
348 #####################################################################
352 # Compile with kernel debugger related code.
357 # Print a stack trace of the current thread on the console for a panic.
362 # Don't enter the debugger for a panic. Intended for unattended operation
363 # where you may want to enter the debugger from the console, but still want
364 # the machine to recover from a panic.
366 options KDB_UNATTENDED
369 # Enable the ddb debugger backend.
374 # Print the numerical value of symbols in addition to the symbolic
380 # Enable the remote gdb debugger backend.
385 # SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the
386 # contents of the registered sysctl nodes on the console. It is disabled by
387 # default because it generates excessively verbose console output that can
388 # interfere with serial console operation.
393 # NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the
395 options NO_SYSCTL_DESCR
398 # MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9)
399 # allocations that are smaller than a page. The purpose is to isolate
400 # different malloc types into hash classes, so that any buffer
401 # overruns or use-after-free will usually only affect memory from
402 # malloc types in that hash class. This is purely a debugging tool;
403 # by varying the hash function and tracking which hash class was
404 # corrupted, the intersection of the hash classes from each instance
405 # will point to a single malloc type that is being misused. At this
406 # point inspection or memguard(9) can be used to catch the offending
409 options MALLOC_DEBUG_MAXZONES=8
412 # DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator
413 # for the kernel used to detect modify-after-free scenarios. See the
414 # memguard(9) man page for more information on usage.
416 options DEBUG_MEMGUARD
419 # DEBUG_REDZONE enables buffer underflows and buffer overflows detection for
422 options DEBUG_REDZONE
425 # KTRACE enables the system-call tracing facility ktrace(2). To be more
426 # SMP-friendly, KTRACE uses a worker thread to process most trace events
427 # asynchronously to the thread generating the event. This requires a
428 # pre-allocated store of objects representing trace events. The
429 # KTRACE_REQUEST_POOL option specifies the initial size of this store.
430 # The size of the pool can be adjusted both at boottime and runtime via
431 # the kern.ktrace_request_pool tunable and sysctl.
433 options KTRACE #kernel tracing
434 options KTRACE_REQUEST_POOL=101
437 # KTR is a kernel tracing facility imported from BSD/OS. It is
438 # enabled with the KTR option. KTR_ENTRIES defines the number of
439 # entries in the circular trace buffer; it may be an arbitrary number.
440 # KTR_COMPILE defines the mask of events to compile into the kernel as
441 # defined by the KTR_* constants in <sys/ktr.h>. KTR_MASK defines the
442 # initial value of the ktr_mask variable which determines at runtime
443 # what events to trace. KTR_CPUMASK determines which CPU's log
444 # events, with bit X corresponding to CPU X. The layout of the string
445 # passed as KTR_CPUMASK must match a serie of bitmasks each of them
446 # separated by the ", " characters (ie:
447 # KTR_CPUMASK=("0xAF, 0xFFFFFFFFFFFFFFFF")). KTR_VERBOSE enables
448 # dumping of KTR events to the console by default. This functionality
449 # can be toggled via the debug.ktr_verbose sysctl and defaults to off
450 # if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details.
453 options KTR_ENTRIES=1024
454 options KTR_COMPILE=(KTR_INTR|KTR_PROC)
455 options KTR_MASK=KTR_INTR
456 options KTR_CPUMASK=("0x3")
460 # ALQ(9) is a facility for the asynchronous queuing of records from the kernel
461 # to a vnode, and is employed by services such as ktr(4) to produce trace
462 # files based on a kernel event stream. Records are written asynchronously
463 # in a worker thread.
469 # The INVARIANTS option is used in a number of source files to enable
470 # extra sanity checking of internal structures. This support is not
471 # enabled by default because of the extra time it would take to check
472 # for these conditions, which can only occur as a result of
473 # programming errors.
478 # The INVARIANT_SUPPORT option makes us compile in support for
479 # verifying some of the internal structures. It is a prerequisite for
480 # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
481 # called. The intent is that you can set 'INVARIANTS' for single
482 # source files (by changing the source file or specifying it on the
483 # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you
484 # wish to build a kernel module with 'INVARIANTS', then adding
485 # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary
486 # infrastructure without the added overhead.
488 options INVARIANT_SUPPORT
491 # The DIAGNOSTIC option is used to enable extra debugging information
492 # from some parts of the kernel. As this makes everything more noisy,
493 # it is disabled by default.
498 # REGRESSION causes optional kernel interfaces necessary only for regression
499 # testing to be enabled. These interfaces may constitute security risks
500 # when enabled, as they permit processes to easily modify aspects of the
501 # run-time environment to reproduce unlikely or unusual (possibly normally
502 # impossible) scenarios.
507 # This option lets some drivers co-exist that can't co-exist in a running
508 # system. This is used to be able to compile all kernel code in one go for
509 # quality assurance purposes (like this file, which the option takes it name
512 options COMPILING_LINT
515 # STACK enables the stack(9) facility, allowing the capture of kernel stack
516 # for the purpose of procinfo(1), etc. stack(9) will also be compiled in
517 # automatically if DDB(4) is compiled into the kernel.
522 #####################################################################
523 # PERFORMANCE MONITORING OPTIONS
526 # The hwpmc driver that allows the use of in-CPU performance monitoring
527 # counters for performance monitoring. The base kernel needs to be configured
528 # with the 'options' line, while the hwpmc device can be either compiled
529 # in or loaded as a loadable kernel module.
531 # Additional configuration options may be required on specific architectures,
532 # please see hwpmc(4).
534 device hwpmc # Driver (also a loadable module)
535 options HWPMC_HOOKS # Other necessary kernel hooks
538 #####################################################################
544 options INET #Internet communications protocols
545 options INET6 #IPv6 communications protocols
547 options ROUTETABLES=2 # max 16. 1 is back compatible.
549 options TCP_OFFLOAD # TCP offload support.
551 # In order to enable IPSEC you MUST also add device crypto to
552 # your kernel configuration
553 options IPSEC #IP security (requires device crypto)
554 #options IPSEC_DEBUG #debug for IP security
557 # Set IPSEC_FILTERTUNNEL to change the default of the sysctl to force packets
558 # coming through a tunnel to be processed by any configured packet filtering
559 # twice. The default is that packets coming out of a tunnel are _not_ processed;
560 # they are assumed trusted.
562 # IPSEC history is preserved for such packets, and can be filtered
563 # using ipfw(8)'s 'ipsec' keyword, when this option is enabled.
565 #options IPSEC_FILTERTUNNEL #filter ipsec packets from a tunnel
567 # Set IPSEC_NAT_T to enable NAT-Traversal support. This enables
568 # optional UDP encapsulation of ESP packets.
570 options IPSEC_NAT_T #NAT-T support, UDP encap of ESP
572 options IPX #IPX/SPX communications protocols
574 options NCP #NetWare Core protocol
576 options NETATALK #Appletalk communications protocols
577 options NETATALKDEBUG #Appletalk debugging
581 # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
583 options NETSMB #SMB/CIFS requester
585 # mchain library. It can be either loaded as KLD or compiled into kernel
588 # libalias library, performing NAT
595 # SCTP is a NEW transport protocol defined by
596 # RFC2960 updated by RFC3309 and RFC3758.. and
597 # soon to have a new base RFC and many many more
598 # extensions. This release supports all the extensions
599 # including many drafts (most about to become RFC's).
600 # It is the reference implementation of SCTP
601 # and is quite well tested.
603 # Note YOU MUST have both INET and INET6 defined.
604 # You don't have to enable V6, but SCTP is
605 # dual stacked and so far we have not torn apart
606 # the V6 and V4.. since an association can span
607 # both a V6 and V4 address at the SAME time :-)
610 # There are bunches of options:
611 # this one turns on all sorts of
612 # nastly printing that you can
613 # do. It's all controlled by a
614 # bit mask (settable by socket opt and
615 # by sysctl). Including will not cause
616 # logging until you set the bits.. but it
617 # can be quite verbose.. so without this
618 # option we don't do any of the tests for
619 # bits and prints.. which makes the code run
620 # faster.. if you are not debugging don't use.
623 # This option turns off the CRC32c checksum. Basically,
624 # you will not be able to talk to anyone else who
625 # has not done this. Its more for experimentation to
626 # see how much CPU the CRC32c really takes. Most new
627 # cards for TCP support checksum offload.. so this
628 # option gives you a "view" into what SCTP would be
629 # like with such an offload (which only exists in
630 # high in iSCSI boards so far). With the new
631 # splitting 8's algorithm its not as bad as it used
632 # to be.. but it does speed things up try only
633 # for in a captured lab environment :-)
634 options SCTP_WITH_NO_CSUM
638 # All that options after that turn on specific types of
639 # logging. You can monitor CWND growth, flight size
640 # and all sorts of things. Go look at the code and
641 # see. I have used this to produce interesting
642 # charts and graphs as well :->
644 # I have not yet committed the tools to get and print
645 # the logs, I will do that eventually .. before then
646 # if you want them send me an email rrs@freebsd.org
647 # You basically must have ktr(4) enabled for these
648 # and you then set the sysctl to turn on/off various
649 # logging bits. Use ktrdump(8) to pull the log and run
650 # it through a display program.. and graphs and other
653 options SCTP_LOCK_LOGGING
654 options SCTP_MBUF_LOGGING
655 options SCTP_MBCNT_LOGGING
656 options SCTP_PACKET_LOGGING
657 options SCTP_LTRACE_CHUNKS
658 options SCTP_LTRACE_ERRORS
661 # altq(9). Enable the base part of the hooks with the ALTQ option.
662 # Individual disciplines must be built into the base system and can not be
663 # loaded as modules at this point. ALTQ requires a stable TSC so if yours is
664 # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC
667 options ALTQ_CBQ # Class Based Queueing
668 options ALTQ_RED # Random Early Detection
669 options ALTQ_RIO # RED In/Out
670 options ALTQ_HFSC # Hierarchical Packet Scheduler
671 options ALTQ_CDNR # Traffic conditioner
672 options ALTQ_PRIQ # Priority Queueing
673 options ALTQ_NOPCC # Required if the TSC is unusable
676 # netgraph(4). Enable the base netgraph code with the NETGRAPH option.
677 # Individual node types can be enabled with the corresponding option
678 # listed below; however, this is not strictly necessary as netgraph
679 # will automatically load the corresponding KLD module if the node type
680 # is not already compiled into the kernel. Each type below has a
681 # corresponding man page, e.g., ng_async(8).
682 options NETGRAPH # netgraph(4) system
683 options NETGRAPH_DEBUG # enable extra debugging, this
684 # affects netgraph(4) and nodes
686 options NETGRAPH_ASYNC
687 options NETGRAPH_ATMLLC
688 options NETGRAPH_ATM_ATMPIF
689 options NETGRAPH_BLUETOOTH # ng_bluetooth(4)
690 options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4)
691 options NETGRAPH_BLUETOOTH_HCI # ng_hci(4)
692 options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4)
693 options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4)
694 options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4)
695 options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4)
697 options NETGRAPH_BRIDGE
699 options NETGRAPH_CISCO
700 options NETGRAPH_DEFLATE
701 options NETGRAPH_DEVICE
702 options NETGRAPH_ECHO
703 options NETGRAPH_EIFACE
704 options NETGRAPH_ETHER
706 options NETGRAPH_FRAME_RELAY
708 options NETGRAPH_GIF_DEMUX
709 options NETGRAPH_HOLE
710 options NETGRAPH_IFACE
711 options NETGRAPH_IP_INPUT
712 options NETGRAPH_IPFW
713 options NETGRAPH_KSOCKET
714 options NETGRAPH_L2TP
716 # MPPC compression requires proprietary files (not included)
717 #options NETGRAPH_MPPC_COMPRESSION
718 options NETGRAPH_MPPC_ENCRYPTION
719 options NETGRAPH_NETFLOW
721 options NETGRAPH_ONE2MANY
722 options NETGRAPH_PATCH
723 options NETGRAPH_PIPE
725 options NETGRAPH_PPPOE
726 options NETGRAPH_PPTPGRE
727 options NETGRAPH_PRED1
728 options NETGRAPH_RFC1490
729 options NETGRAPH_SOCKET
730 options NETGRAPH_SPLIT
731 options NETGRAPH_SPPP
733 options NETGRAPH_TCPMSS
737 options NETGRAPH_VLAN
739 # NgATM - Netgraph ATM
741 options NGATM_ATMBASE
747 device mn # Munich32x/Falc54 Nx64kbit/sec cards.
750 # Network interfaces:
751 # The `loop' device is MANDATORY when networking is enabled.
754 # The `ether' device provides generic code to handle
755 # Ethernets; it is MANDATORY when an Ethernet device driver is
756 # configured or token-ring is enabled.
759 # The `vlan' device implements the VLAN tagging of Ethernet frames
760 # according to IEEE 802.1Q.
763 # The `wlan' device provides generic code to support 802.11
764 # drivers, including host AP mode; it is MANDATORY for the wi,
765 # and ath drivers and will eventually be required by all 802.11 drivers.
767 options IEEE80211_DEBUG #enable debugging msgs
768 options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's
769 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
770 options IEEE80211_SUPPORT_TDMA #enable TDMA support
772 # The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
773 # support for WEP, TKIP, and AES-CCMP crypto protocols optionally
774 # used with 802.11 devices that depend on the `wlan' module.
779 # The `wlan_xauth' device provides support for external (i.e. user-mode)
780 # authenticators for use with 802.11 drivers that use the `wlan'
781 # module and support 802.1x and/or WPA security protocols.
784 # The `wlan_acl' device provides a MAC-based access control mechanism
785 # for use with 802.11 drivers operating in ap mode and using the
787 # The 'wlan_amrr' device provides AMRR transmit rate control algorithm
794 # The `fddi' device provides generic code to support FDDI.
797 # The `arcnet' device provides generic code to support Arcnet.
800 # The `sppp' device serves a similar role for certain types
801 # of synchronous PPP links (like `cx', `ar').
804 # The `bpf' device enables the Berkeley Packet Filter. Be
805 # aware of the legal and administrative consequences of enabling this
806 # option. DHCP requires bpf.
809 # The `netmap' device implements memory-mapped access to network
810 # devices from userspace, enabling wire-speed packet capture and
811 # generation even at 10Gbit/s. Requires support in the device
812 # driver. Supported drivers are ixgbe, e1000, re.
815 # The `disc' device implements a minimal network interface,
816 # which throws away all packets sent and never receives any. It is
817 # included for testing and benchmarking purposes.
820 # The `epair' device implements a virtual back-to-back connected Ethernet
821 # like interface pair.
824 # The `edsc' device implements a minimal Ethernet interface,
825 # which discards all packets sent and receives none.
828 # The `tap' device is a pty-like virtual Ethernet interface
831 # The `tun' device implements (user-)ppp and nos-tun(8)
834 # The `gif' device implements IPv6 over IP4 tunneling,
835 # IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
836 # IPv6 over IPv6 tunneling.
837 # The `gre' device implements two types of IP4 over IP4 tunneling:
838 # GRE and MOBILE, as specified in the RFC1701 and RFC2004.
839 # The XBONEHACK option allows the same pair of addresses to be configured on
840 # multiple gif interfaces.
845 # The `faith' device captures packets sent to it and diverts them
846 # to the IPv4/IPv6 translation daemon.
847 # The `stf' device implements 6to4 encapsulation.
851 # The `ef' device provides support for multiple ethernet frame types
852 # specified via ETHER_* options. See ef(4) for details.
854 options ETHER_II # enable Ethernet_II frame
855 options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
856 options ETHER_8022 # enable Ethernet_802.2 frame
857 options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
859 # The pf packet filter consists of three devices:
860 # The `pf' device provides /dev/pf and the firewall code itself.
861 # The `pflog' device provides the pflog0 interface which logs packets.
862 # The `pfsync' device provides the pfsync0 interface used for
863 # synchronization of firewall state tables (over the net).
871 # Common Address Redundancy Protocol. See carp(4) for more details.
877 # Link aggregation interface.
881 # Internet family options:
883 # MROUTING enables the kernel multicast packet forwarder, which works
884 # with mrouted and XORP.
886 # IPFIREWALL enables support for IP firewall construction, in
887 # conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
888 # logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
889 # limits the number of times a matching entry can be logged.
891 # WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
892 # and if you do not add other rules during startup to allow access,
893 # YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
894 # in /etc/rc.conf when first enabling this feature, then refining the
895 # firewall rules in /etc/rc.firewall after you've tested that the new kernel
896 # feature works properly.
898 # IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
899 # allow everything. Use with care, if a cracker can crash your
900 # firewall machine, they can get to your protected machines. However,
901 # if you are using it as an as-needed filter for specific problems as
902 # they arise, then this may be for you. Changing the default to 'allow'
903 # means that you won't get stuck if the kernel and /sbin/ipfw binary get
906 # IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It
907 # depends on IPFIREWALL if compiled into the kernel.
909 # IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires
912 # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
913 # packets without touching the TTL). This can be useful to hide firewalls
914 # from traceroute and similar tools.
916 # TCPDEBUG enables code which keeps traces of the TCP state machine
917 # for sockets with the SO_DEBUG option set, which can then be examined
918 # using the trpt(8) utility.
920 options MROUTING # Multicast routing
921 options IPFIREWALL #firewall
922 options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
923 options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
924 options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
925 options IPFIREWALL_NAT #ipfw kernel nat support
926 options IPDIVERT #divert sockets
927 options IPFILTER #ipfilter support
928 options IPFILTER_LOG #ipfilter logging
929 options IPFILTER_LOOKUP #ipfilter pools
930 options IPFILTER_DEFAULT_BLOCK #block all packets by default
931 options IPSTEALTH #support for stealth forwarding
934 # The MBUF_STRESS_TEST option enables options which create
935 # various random failures / extreme cases related to mbuf
936 # functions. See mbuf(9) for a list of available test cases.
937 # MBUF_PROFILING enables code to profile the mbuf chains
938 # exiting the system (via participating interfaces) and
939 # return a logarithmic histogram of monitored parameters
940 # (e.g. packet size, wasted space, number of mbufs in chain).
941 options MBUF_STRESS_TEST
942 options MBUF_PROFILING
944 # Statically link in accept filters
945 options ACCEPT_FILTER_DATA
946 options ACCEPT_FILTER_DNS
947 options ACCEPT_FILTER_HTTP
949 # TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
950 # carried in TCP option 19. This option is commonly used to protect
951 # TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
952 # This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
953 # This requires the use of 'device crypto', 'options IPSEC'
954 # or 'device cryptodev'.
955 options TCP_SIGNATURE #include support for RFC 2385
957 # DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL
958 # as well. See dummynet(4) and ipfw(8) for more info. When you run
959 # DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve
960 # a smooth scheduling of the traffic.
963 # Zero copy sockets support. This enables "zero copy" for sending and
964 # receiving data via a socket. The send side works for any type of NIC,
965 # the receive side only works for NICs that support MTUs greater than the
966 # page size of your architecture and that support header splitting. See
967 # zero_copy(9) for more details.
968 options ZERO_COPY_SOCKETS
970 #####################################################################
974 # Only the root filesystem needs to be statically compiled or preloaded
975 # as module; everything else will be automatically loaded at mount
976 # time. Some people still prefer to statically compile other
977 # filesystems as well.
979 # NB: The PORTAL filesystem is known to be buggy, and WILL panic your
980 # system if you attempt to do anything with it. It is included here
981 # as an incentive for some enterprising soul to sit down and fix it.
982 # The UNION filesystem was known to be buggy in the past. It is now
983 # being actively maintained, although there are still some issues being
987 # One of these is mandatory:
988 options FFS #Fast filesystem
989 options NFSCLIENT #Network File System client
991 # The rest are optional:
992 options CD9660 #ISO 9660 filesystem
993 options FDESCFS #File descriptor filesystem
994 options HPFS #OS/2 File system
995 options MSDOSFS #MS DOS File System (FAT, FAT32)
996 options NFSSERVER #Network File System server
997 options NFSLOCKD #Network Lock Manager
998 options NFSCL #experimental NFS client with NFSv4
999 options NFSD #experimental NFS server with NFSv4
1000 options KGSSAPI #Kernel GSSAPI implementation
1002 # NT File System. Read-mostly, see mount_ntfs(8) for details.
1003 # For a full read-write NTFS support consider sysutils/fusefs-ntfs
1007 options NULLFS #NULL filesystem
1008 # Broken (depends on NCP):
1009 #options NWFS #NetWare filesystem
1010 options PORTALFS #Portal filesystem
1011 options PROCFS #Process filesystem (requires PSEUDOFS)
1012 options PSEUDOFS #Pseudo-filesystem framework
1013 options PSEUDOFS_TRACE #Debugging support for PSEUDOFS
1014 options SMBFS #SMB/CIFS filesystem
1015 options TMPFS #Efficient memory filesystem
1016 options UDF #Universal Disk Format
1017 options UNIONFS #Union filesystem
1018 # The xFS_ROOT options REQUIRE the associated ``options xFS''
1019 options NFS_ROOT #NFS usable as root device
1021 # Soft updates is a technique for improving filesystem speed and
1022 # making abrupt shutdown less risky.
1026 # Extended attributes allow additional data to be associated with files,
1027 # and is used for ACLs, Capabilities, and MAC labels.
1028 # See src/sys/ufs/ufs/README.extattr for more information.
1030 options UFS_EXTATTR_AUTOSTART
1032 # Access Control List support for UFS filesystems. The current ACL
1033 # implementation requires extended attribute support, UFS_EXTATTR,
1034 # for the underlying filesystem.
1035 # See src/sys/ufs/ufs/README.acls for more information.
1038 # Directory hashing improves the speed of operations on very large
1039 # directories at the expense of some memory.
1042 # Gjournal-based UFS journaling support.
1043 options UFS_GJOURNAL
1045 # Make space in the kernel for a root filesystem on a md device.
1046 # Define to the number of kilobytes to reserve for the filesystem.
1047 options MD_ROOT_SIZE=10
1049 # Make the md device a potential root device, either with preloaded
1050 # images of type mfs_root or md_root.
1053 # Disk quotas are supported when this option is enabled.
1054 options QUOTA #enable disk quotas
1056 # If you are running a machine just as a fileserver for PC and MAC
1057 # users, using SAMBA or Netatalk, you may consider setting this option
1058 # and keeping all those users' directories on a filesystem that is
1059 # mounted with the suiddir option. This gives new files the same
1060 # ownership as the directory (similar to group). It's a security hole
1061 # if you let these users run programs, so confine it to file-servers
1062 # (but it'll save you lots of headaches in those cases). Root owned
1063 # directories are exempt and X bits are cleared. The suid bit must be
1064 # set on the directory as well; see chmod(1). PC owners can't see/set
1065 # ownerships so they keep getting their toes trodden on. This saves
1066 # you all the support calls as the filesystem it's used on will act as
1067 # they expect: "It's my dir so it must be my file".
1072 options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
1073 options NFS_MAXATTRTIMO=60
1074 options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
1075 options NFS_MAXDIRATTRTIMO=60
1076 options NFS_GATHERDELAY=10 # Default write gather delay (msec)
1077 options NFS_WDELAYHASHSIZ=16 # and with this
1078 options NFS_DEBUG # Enable NFS Debugging
1081 options CODA #CODA filesystem.
1082 device vcoda #coda minicache <-> venus comm.
1083 # Use the old Coda 5.x venus<->kernel interface instead of the new
1084 # realms-aware 6.x protocol.
1085 #options CODA_COMPAT_5
1088 # Add support for the EXT2FS filesystem of Linux fame. Be a bit
1089 # careful with this - the ext2fs code has a tendency to lag behind
1090 # changes and not be exercised very much, so mounting read/write could
1091 # be dangerous (and even mounting read only could result in panics.)
1096 # Add support for the ReiserFS filesystem (used in Linux). Currently,
1097 # this is limited to read-only access.
1102 # Add support for the SGI XFS filesystem. Currently,
1103 # this is limited to read-only access.
1107 # Use real implementations of the aio_* system calls. There are numerous
1108 # stability and security issues in the current aio code that make it
1109 # unsuitable for inclusion on machines with untrusted local users.
1112 # Cryptographically secure random number generator; /dev/random
1115 # The system memory devices; /dev/mem, /dev/kmem
1118 # The kernel symbol table device; /dev/ksyms
1121 # Optional character code conversion support with LIBICONV.
1122 # Each option requires their base file system and LIBICONV.
1123 options CD9660_ICONV
1124 options MSDOSFS_ICONV
1129 #####################################################################
1132 # Real time extensions added in the 1993 POSIX
1133 # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
1135 options _KPOSIX_PRIORITY_SCHEDULING
1136 # p1003_1b_semaphores are very experimental,
1137 # user should be ready to assist in debugging if problems arise.
1138 options P1003_1B_SEMAPHORES
1140 # POSIX message queue
1141 options P1003_1B_MQUEUE
1143 #####################################################################
1144 # SECURITY POLICY PARAMETERS
1146 # Support for BSM audit
1149 # Support for Mandatory Access Control (MAC):
1152 options MAC_BSDEXTENDED
1157 options MAC_PARTITION
1159 options MAC_SEEOTHERUIDS
1163 # Support for Capsicum
1164 options CAPABILITIES # fine-grained rights on file descriptors
1165 options CAPABILITY_MODE # sandboxes with no global namespace access
1167 # Support for process descriptors
1171 #####################################################################
1174 # The granularity of operation is controlled by the kernel option HZ whose
1175 # default value (1000 on most architectures) means a granularity of 1ms
1176 # (1s/HZ). Historically, the default was 100, but finer granularity is
1177 # required for DUMMYNET and other systems on modern hardware. There are
1178 # reasonable arguments that HZ should, in fact, be 100 still; consider,
1179 # that reducing the granularity too much might cause excessive overhead in
1180 # clock interrupt processing, potentially causing ticks to be missed and thus
1181 # actually reducing the accuracy of operation.
1185 # Enable support for the kernel PLL to use an external PPS signal,
1186 # under supervision of [x]ntpd(8)
1187 # More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1192 #####################################################################
1195 # SCSI DEVICE CONFIGURATION
1197 # The SCSI subsystem consists of the `base' SCSI code, a number of
1198 # high-level SCSI device `type' drivers, and the low-level host-adapter
1199 # device drivers. The host adapters are listed in the ISA and PCI
1200 # device configuration sections below.
1202 # It is possible to wire down your SCSI devices so that a given bus,
1203 # target, and LUN always come on line as the same device unit. In
1204 # earlier versions the unit numbers were assigned in the order that
1205 # the devices were probed on the SCSI bus. This means that if you
1206 # removed a disk drive, you may have had to rewrite your /etc/fstab
1207 # file, and also that you had to be careful when adding a new disk
1208 # as it may have been probed earlier and moved your device configuration
1209 # around. (See also option GEOM_VOL for a different solution to this
1212 # This old behavior is maintained as the default behavior. The unit
1213 # assignment begins with the first non-wired down unit for a device
1214 # type. For example, if you wire a disk as "da3" then the first
1215 # non-wired disk will be assigned da4.
1217 # The syntax for wiring down devices is:
1219 hint.scbus.0.at="ahc0"
1220 hint.scbus.1.at="ahc1"
1221 hint.scbus.1.bus="0"
1222 hint.scbus.3.at="ahc2"
1223 hint.scbus.3.bus="0"
1224 hint.scbus.2.at="ahc2"
1225 hint.scbus.2.bus="1"
1226 hint.da.0.at="scbus0"
1227 hint.da.0.target="0"
1229 hint.da.1.at="scbus3"
1230 hint.da.1.target="1"
1231 hint.da.2.at="scbus2"
1232 hint.da.2.target="3"
1233 hint.sa.1.at="scbus1"
1234 hint.sa.1.target="6"
1236 # "units" (SCSI logical unit number) that are not specified are
1237 # treated as if specified as LUN 0.
1239 # All SCSI devices allocate as many units as are required.
1241 # The ch driver drives SCSI Media Changer ("jukebox") devices.
1243 # The da driver drives SCSI Direct Access ("disk") and Optical Media
1246 # The sa driver drives SCSI Sequential Access ("tape") devices.
1248 # The cd driver drives SCSI Read Only Direct Access ("cd") devices.
1250 # The ses driver drives SCSI Environment Services ("ses") and
1251 # SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices.
1253 # The pt driver drives SCSI Processor devices.
1255 # The sg driver provides a passthrough API that is compatible with the
1256 # Linux SG driver. It will work in conjunction with the COMPAT_LINUX
1257 # option to run linux SG apps. It can also stand on its own and provide
1258 # source level API compatiblity for porting apps to FreeBSD.
1260 # Target Mode support is provided here but also requires that a SIM
1261 # (SCSI Host Adapter Driver) provide support as well.
1263 # The targ driver provides target mode support as a Processor type device.
1264 # It exists to give the minimal context necessary to respond to Inquiry
1265 # commands. There is a sample user application that shows how the rest
1266 # of the command support might be done in /usr/share/examples/scsi_target.
1268 # The targbh driver provides target mode support and exists to respond
1269 # to incoming commands that do not otherwise have a logical unit assigned
1272 # The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
1273 # configuration as the "pass" driver.
1275 device scbus #base SCSI code
1276 device ch #SCSI media changers
1277 device da #SCSI direct access devices (aka disks)
1278 device sa #SCSI tapes
1279 device cd #SCSI CD-ROMs
1280 device ses #SCSI Environmental Services (and SAF-TE)
1281 device pt #SCSI processor
1282 device targ #SCSI Target Mode Code
1283 device targbh #SCSI Target Mode Blackhole Device
1284 device pass #CAM passthrough driver
1285 device sg #Linux SCSI passthrough
1286 device ctl #CAM Target Layer
1289 # debugging options:
1290 # CAMDEBUG Compile in all possible debugging.
1291 # CAM_DEBUG_COMPILE Debug levels to compile in.
1292 # CAM_DEBUG_FLAGS Debug levels to enable on boot.
1293 # CAM_DEBUG_BUS Limit debugging to the given bus.
1294 # CAM_DEBUG_TARGET Limit debugging to the given target.
1295 # CAM_DEBUG_LUN Limit debugging to the given lun.
1296 # CAM_DEBUG_DELAY Delay in us after printing each debug line.
1298 # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
1299 # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
1300 # SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
1301 # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
1302 # queue after a bus reset, and the number of milliseconds to
1303 # freeze the device queue after a bus device reset. This
1304 # can be changed at boot and runtime with the
1305 # kern.cam.scsi_delay tunable/sysctl.
1307 options CAM_DEBUG_COMPILE=-1
1308 options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH)
1309 options CAM_DEBUG_BUS=-1
1310 options CAM_DEBUG_TARGET=-1
1311 options CAM_DEBUG_LUN=-1
1312 options CAM_DEBUG_DELAY=1
1313 options CAM_MAX_HIGHPOWER=4
1314 options SCSI_NO_SENSE_STRINGS
1315 options SCSI_NO_OP_STRINGS
1316 options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device
1318 # Options for the CAM CDROM driver:
1319 # CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
1320 # CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
1321 # enforced if there is I/O waiting for another LUN
1322 # The compiled in defaults for these variables are 2 and 10 seconds,
1325 # These can also be changed on the fly with the following sysctl variables:
1326 # kern.cam.cd.changer.min_busy_seconds
1327 # kern.cam.cd.changer.max_busy_seconds
1329 options CHANGER_MIN_BUSY_SECONDS=2
1330 options CHANGER_MAX_BUSY_SECONDS=10
1332 # Options for the CAM sequential access driver:
1333 # SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
1334 # SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
1335 # SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
1336 # SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
1337 # SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
1338 options SA_IO_TIMEOUT=4
1339 options SA_SPACE_TIMEOUT=60
1340 options SA_REWIND_TIMEOUT=(2*60)
1341 options SA_ERASE_TIMEOUT=(4*60)
1342 options SA_1FM_AT_EOD
1344 # Optional timeout for the CAM processor target (pt) device
1345 # This is specified in seconds. The default is 60 seconds.
1346 options SCSI_PT_DEFAULT_TIMEOUT=60
1348 # Optional enable of doing SES passthrough on other devices (e.g., disks)
1350 # Normally disabled because a lot of newer SCSI disks report themselves
1351 # as having SES capabilities, but this can then clot up attempts to build
1352 # a topology with the SES device that's on the box these drives are in....
1353 options SES_ENABLE_PASSTHROUGH
1356 #####################################################################
1357 # MISCELLANEOUS DEVICES AND OPTIONS
1359 device pty #BSD-style compatibility pseudo ttys
1360 device nmdm #back-to-back tty devices
1361 device md #Memory/malloc disk
1362 device snp #Snoop device - to look at pty/vty/etc..
1363 device ccd #Concatenated disk driver
1364 device firmware #firmware(9) support
1366 # Kernel side iconv library
1369 # Size of the kernel message buffer. Should be N * pagesize.
1370 options MSGBUF_SIZE=40960
1373 #####################################################################
1374 # HARDWARE DEVICE CONFIGURATION
1376 # For ISA the required hints are listed.
1377 # EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so
1378 # no hints are needed.
1381 # Mandatory devices:
1384 # These options are valid for other keyboard drivers as well.
1385 options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
1386 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
1388 options FB_DEBUG # Frame buffer debugging
1390 device splash # Splash screen and screen saver support
1392 # Various screen savers.
1405 # The syscons console driver (SCO color console compatible).
1408 options MAXCONS=16 # number of virtual consoles
1409 options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
1410 options SC_DFLT_FONT # compile font in
1411 makeoptions SC_DFLT_FONT=cp850
1412 options SC_DISABLE_KDBKEY # disable `debug' key
1413 options SC_DISABLE_REBOOT # disable reboot key sequence
1414 options SC_HISTORY_SIZE=200 # number of history buffer lines
1415 options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
1416 options SC_PIXEL_MODE # add support for the raster text mode
1418 # The following options will let you change the default colors of syscons.
1419 options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
1420 options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
1421 options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
1422 options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
1424 # The following options will let you change the default behaviour of
1425 # cut-n-paste feature
1426 options SC_CUT_SPACES2TABS # convert leading spaces into tabs
1427 options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words
1428 # (default is single space - \"x20\")
1430 # If you have a two button mouse, you may want to add the following option
1431 # to use the right button of the mouse to paste text.
1432 options SC_TWOBUTTON_MOUSE
1434 # You can selectively disable features in syscons.
1435 options SC_NO_CUTPASTE
1436 options SC_NO_FONT_LOADING
1437 options SC_NO_HISTORY
1438 options SC_NO_MODE_CHANGE
1439 options SC_NO_SYSMOUSE
1440 options SC_NO_SUSPEND_VTYSWITCH
1443 # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode
1444 # 0x100 Probe for a keyboard device periodically if one is not present
1446 # Enable experimental features of the syscons terminal emulator (teken).
1447 options TEKEN_CONS25 # cons25-style terminal emulation
1448 options TEKEN_UTF8 # UTF-8 output handling
1455 # SCSI host adapters:
1457 # adv: All Narrow SCSI bus AdvanSys controllers.
1458 # adw: Second Generation AdvanSys controllers including the ADV940UW.
1459 # aha: Adaptec 154x/1535/1640
1460 # ahb: Adaptec 174x EISA controllers
1461 # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
1462 # 19160x/29160x, aic7770/aic78xx
1463 # ahd: Adaptec 29320/39320 Controllers.
1464 # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
1465 # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
1466 # such as the Tekram DC-390(T).
1467 # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
1468 # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
1469 # esp: Emulex ESP, NCR 53C9x and QLogic FAS families based controllers
1470 # including the AMD Am53C974 (found on devices such as the Tekram
1471 # DC-390(T)) and the Sun ESP and FAS families of controllers
1472 # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
1473 # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
1474 # ISP 12160 Ultra3 SCSI,
1475 # Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters.
1476 # Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters.
1477 # Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters.
1478 # ispfw: Firmware module for Qlogic host adapters
1479 # mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4
1480 # or FC9x9 Fibre Channel host adapters.
1481 # ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
1482 # sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
1483 # 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875,
1484 # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
1485 # 53C1010-33, 53C1010-66.
1486 # trm: Tekram DC395U/UW/F DC315U adapters.
1490 # Note that the order is important in order for Buslogic ISA/EISA cards to be
1495 hint.bt.0.port="0x330"
1508 device iscsi_initiator
1510 hint.isp.0.disable="1"
1512 hint.isp.0.prefer_iomap="1"
1513 hint.isp.0.prefer_memmap="1"
1514 hint.isp.0.fwload_disable="1"
1515 hint.isp.0.ignore_nvram="1"
1516 hint.isp.0.fullduplex="1"
1517 hint.isp.0.topology="lport"
1518 hint.isp.0.topology="nport"
1519 hint.isp.0.topology="lport-only"
1520 hint.isp.0.topology="nport-only"
1521 # we can't get u_int64_t types, nor can we get strings if it's got
1522 # a leading 0x, hence this silly dodge.
1523 hint.isp.0.portwnn="w50000000aaaa0000"
1524 hint.isp.0.nodewnn="w50000000aaaa0001"
1532 hint.wds.0.port="0x350"
1536 # The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1537 # controllers that have it configured only if this option is set. Unfortunately,
1538 # this doesn't work on some motherboards, which prevents it from being the
1540 options AHC_ALLOW_MEMIO
1542 # Dump the contents of the ahc controller configuration PROM.
1543 options AHC_DUMP_EEPROM
1545 # Bitmap of units to enable targetmode operations.
1546 options AHC_TMODE_ENABLE
1548 # Compile in Aic7xxx Debugging code.
1551 # Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h
1552 options AHC_DEBUG_OPTS
1554 # Print register bitfields in debug output. Adds ~128k to driver
1556 options AHC_REG_PRETTY_PRINT
1558 # Compile in aic79xx debugging code.
1561 # Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4).
1562 options AHD_DEBUG_OPTS=0xFFFFFFFF
1564 # Print human-readable register definitions when debugging
1565 options AHD_REG_PRETTY_PRINT
1567 # Bitmap of units to enable targetmode operations.
1568 options AHD_TMODE_ENABLE
1570 # The adw driver will attempt to use memory mapped I/O for all PCI
1571 # controllers that have it configured only if this option is set.
1572 options ADW_ALLOW_MEMIO
1574 # Options used in dev/iscsi (Software iSCSI stack)
1576 options ISCSI_INITIATOR_DEBUG=9
1578 # Options used in dev/isp/ (Qlogic SCSI/FC driver).
1580 # ISP_TARGET_MODE - enable target mode operation
1582 options ISP_TARGET_MODE=1
1584 # ISP_DEFAULT_ROLES - default role
1588 # both=3 (not supported currently)
1590 # ISP_INTERNAL_TARGET (trivial internal disk target, for testing)
1592 options ISP_DEFAULT_ROLES=0
1594 # Options used in dev/sym/ (Symbios SCSI driver).
1595 #options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1596 # Allows the ncr to take precedence
1597 # 1 (1<<0) -> 810a, 860
1598 # 2 (1<<1) -> 825a, 875, 885, 895
1599 # 4 (1<<2) -> 895a, 896, 1510d
1600 #options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1601 # disabled:0 (default), enabled:1
1602 #options SYM_SETUP_PCI_PARITY #-PCI parity checking
1603 # disabled:0, enabled:1 (default)
1604 #options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1605 # default:8, range:[1..64]
1607 # The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
1608 # These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1609 # The DPT controllers are commonly re-licensed under other brand-names -
1610 # some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1611 # Compaq are actually DPT controllers.
1613 # See src/sys/dev/dpt for debugging and other subtle options.
1614 # DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1615 # instruments are enabled. The tools in
1616 # /usr/sbin/dpt_* assume these to be enabled.
1617 # DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
1618 # If you want the driver to handle timeouts, enable
1619 # this option. If your system is very busy, this
1620 # option will create more trouble than solve.
1621 # DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
1622 # wait when timing out with the above option.
1623 # DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
1624 # DPT_LOST_IRQ When enabled, will try, once per second, to catch
1625 # any interrupt that got lost. Seems to help in some
1626 # DPT-firmware/Motherboard combinations. Minimal
1627 # cost, great benefit.
1628 # DPT_RESET_HBA Make "reset" actually reset the controller
1629 # instead of fudging it. Only enable this if you
1630 # are 100% certain you need it.
1635 #!CAM# options DPT_MEASURE_PERFORMANCE
1636 #!CAM# options DPT_HANDLE_TIMEOUTS
1637 options DPT_TIMEOUT_FACTOR=4
1638 options DPT_LOST_IRQ
1639 options DPT_RESET_HBA
1642 # Compaq "CISS" RAID controllers (SmartRAID 5* series)
1643 # These controllers have a SCSI-like interface, and require the
1644 # CAM infrastructure.
1649 # Intel Integrated RAID controllers.
1650 # This driver was developed and is maintained by Intel. Contacts
1651 # at Intel for this driver are
1652 # "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
1653 # "Leubner, Achim" <achim.leubner@intel.com>.
1658 # Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
1659 # firmware. These controllers have a SCSI-like interface, and require
1660 # the CAM infrastructure.
1665 # Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1666 # one entry is needed; the code will find and configure all supported
1669 device ida # Compaq Smart RAID
1670 device mlx # Mylex DAC960
1671 device amr # AMI MegaRAID
1672 device amrp # SCSI Passthrough interface (optional, CAM req.)
1673 device mfi # LSI MegaRAID SAS
1674 device mfip # LSI MegaRAID SAS passthrough, requires CAM
1676 device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s
1681 device twe # 3ware ATA RAID
1684 # Serial ATA host controllers:
1686 # ahci: Advanced Host Controller Interface (AHCI) compatible
1687 # mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers
1688 # siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers
1690 # These drivers are part of cam(4) subsystem. They supersede less featured
1691 # ata(4) subsystem drivers, supporting same hardware.
1698 # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
1699 # devices. You only need one "device ata" for it to find all
1700 # PCI and PC Card ATA/ATAPI devices on modern machines.
1701 # Alternatively, individual bus and chipset drivers may be chosen by using
1702 # the 'atacore' driver then selecting the drivers on a per vendor basis.
1703 # For example to build a system which only supports a VIA chipset,
1704 # omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers.
1706 #device atadisk # ATA disk drives
1707 #device ataraid # ATA RAID drives
1708 #device atapicd # ATAPI CDROM drives
1709 #device atapifd # ATAPI floppy drives
1710 #device atapist # ATAPI tape drives
1711 #device atapicam # emulate ATAPI devices as SCSI ditto via CAM
1712 # needs CAM to be present (scbus & pass)
1715 #device atacore # Core ATA functionality
1716 #device atacard # CARDBUS support
1717 #device atabus # PC98 cbus support
1718 #device ataisa # ISA bus support
1719 #device atapci # PCI bus support; only generic chipset support
1722 #device ataahci # AHCI SATA
1723 #device ataacard # ACARD
1724 #device ataacerlabs # Acer Labs Inc. (ALI)
1725 #device ataadaptec # Adaptec
1726 #device ataamd # American Micro Devices (AMD)
1727 #device ataati # ATI
1728 #device atacenatek # Cenatek
1729 #device atacypress # Cypress
1730 #device atacyrix # Cyrix
1731 #device atahighpoint # HighPoint
1732 #device ataintel # Intel
1733 #device ataite # Integrated Technology Inc. (ITE)
1734 #device atajmicron # JMicron
1735 #device atamarvell # Marvell
1736 #device atamicron # Micron
1737 #device atanational # National
1738 #device atanetcell # NetCell
1739 #device atanvidia # nVidia
1740 #device atapromise # Promise
1741 #device ataserverworks # ServerWorks
1742 #device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD)
1743 #device atasis # Silicon Integrated Systems Corp.(SiS)
1744 #device atavia # VIA Technologies Inc.
1747 # For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
1749 hint.ata.0.port="0x1f0"
1752 hint.ata.1.port="0x170"
1756 # The following options are valid on the ATA driver:
1758 # ATA_STATIC_ID: controller numbering is static ie depends on location
1759 # else the device numbers are dynamically allocated.
1760 # ATA_REQUEST_TIMEOUT: the number of seconds to wait for an ATA request
1761 # before timing out.
1762 # ATA_CAM: Turn ata(4) subsystem controller drivers into cam(4)
1763 # interface modules. This deprecates all ata(4)
1764 # peripheral device drivers (atadisk, ataraid, atapicd,
1765 # atapifd, atapist, atapicam) and all user-level APIs.
1766 # cam(4) drivers and APIs will be connected instead.
1768 options ATA_STATIC_ID
1769 #options ATA_REQUEST_TIMEOUT=10
1773 # Standard floppy disk controllers and floppy tapes, supports
1774 # the Y-E DATA External FDD (PC Card)
1778 hint.fdc.0.port="0x3F0"
1782 # FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1783 # gotta turn it actually on by setting the variable fd_debug with DDB,
1787 # Activate this line if you happen to have an Insight floppy tape.
1788 # Probing them proved to be dangerous for people with floppy disks only,
1789 # so it's "hidden" behind a flag:
1790 #hint.fdc.0.flags="1"
1792 # Specify floppy devices
1799 # uart: newbusified driver for serial interfaces. It consolidates the sio(4),
1800 # sab(4) and zs(4) drivers.
1804 # Options for uart(4)
1805 options UART_PPS_ON_CTS # Do time pulse capturing using CTS
1808 # The following hint should only be used for pure ISA devices. It is not
1809 # needed otherwise. Use of hints is strongly discouraged.
1810 hint.uart.0.at="isa"
1812 # The following 3 hints are used when the UART is a system device (i.e., a
1813 # console or debug port), but only on platforms that don't have any other
1814 # means to pass the information to the kernel. The unit number of the hint
1815 # is only used to bundle the hints together. There is no relation to the
1816 # unit number of the probed UART.
1817 hint.uart.0.port="0x3f8"
1818 hint.uart.0.flags="0x10"
1819 hint.uart.0.baud="115200"
1821 # `flags' for serial drivers that support consoles like sio(4) and uart(4):
1822 # 0x10 enable console support for this unit. Other console flags
1823 # (if applicable) are ignored unless this is set. Enabling
1824 # console support does not make the unit the preferred console.
1825 # Boot with -h or set boot_serial=YES in the loader. For sio(4)
1826 # specifically, the 0x20 flag can also be set (see above).
1827 # Currently, at most one unit can have console support; the
1828 # first one (in config file order) with this flag set is
1829 # preferred. Setting this flag for sio0 gives the old behaviour.
1830 # 0x80 use this port for serial line gdb support in ddb. Also known
1834 # Options for serial drivers that support consoles:
1835 options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to
1836 # ddb, if available.
1838 # Solaris implements a new BREAK which is initiated by a character
1839 # sequence CR ~ ^b which is similar to a familiar pattern used on
1840 # Sun servers by the Remote Console. There are FreeBSD extensions:
1841 # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot.
1842 options ALT_BREAK_TO_DEBUGGER
1844 # Serial Communications Controller
1845 # Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel
1846 # communications controllers.
1849 # PCI Universal Communications driver
1850 # Supports various multi port PCI I/O cards.
1854 # Network interfaces:
1856 # MII bus support is required for many PCI Ethernet NICs,
1857 # namely those which use MII-compliant transceivers or implement
1858 # transceiver control interfaces that operate like an MII. Adding
1859 # "device miibus" to the kernel config pulls in support for the generic
1860 # miibus API, the common support for for bit-bang'ing the MII and all
1861 # of the PHY drivers, including a generic one for PHYs that aren't
1862 # specifically handled by an individual driver. Support for specific
1863 # PHYs may be built by adding "device mii", "device mii_bitbang" if
1864 # needed by the NIC driver and then adding the appropriate PHY driver.
1865 device mii # Minimal MII support
1866 device mii_bitbang # Common module for bit-bang'ing the MII
1867 device miibus # MII support w/ bit-bang'ing and all PHYs
1869 device acphy # Altima Communications AC101
1870 device amphy # AMD AM79c873 / Davicom DM910{1,2}
1871 device atphy # Attansic/Atheros F1
1872 device axphy # Asix Semiconductor AX88x9x
1873 device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C
1874 device brgphy # Broadcom BCM54xx/57xx 1000baseTX
1875 device ciphy # Cicada/Vitesse CS/VSC8xxx
1876 device e1000phy # Marvell 88E1000 1000/100/10-BT
1877 device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces
1878 device icsphy # ICS ICS1889-1893
1879 device ip1000phy # IC Plus IP1000A/IP1001
1880 device jmphy # JMicron JMP211/JMP202
1881 device lxtphy # Level One LXT-970
1882 device mlphy # Micro Linear 6692
1883 device nsgphy # NatSemi DP8361/DP83865/DP83891
1884 device nsphy # NatSemi DP83840A
1885 device nsphyter # NatSemi DP83843/DP83815
1886 device pnaphy # HomePNA
1887 device qsphy # Quality Semiconductor QS6612
1888 device rdcphy # RDC Semiconductor R6040
1889 device rgephy # RealTek 8169S/8110S/8211B/8211C
1890 device rlphy # RealTek 8139
1891 device rlswitch # RealTek 8305
1892 device smcphy # SMSC LAN91C111
1893 device tdkphy # TDK 89Q2120
1894 device tlphy # Texas Instruments ThunderLAN
1895 device truephy # LSI TruePHY
1896 device xmphy # XaQti XMAC II
1898 # an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1899 # PCI and ISA varieties.
1900 # ae: Support for gigabit ethernet adapters based on the Attansic/Atheros
1901 # L2 PCI-Express FastEthernet controllers.
1902 # age: Support for gigabit ethernet adapters based on the Attansic/Atheros
1903 # L1 PCI express gigabit ethernet controllers.
1904 # alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers.
1905 # ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers.
1906 # ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan)
1907 # bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet
1909 # bfe: Broadcom BCM4401 Ethernet adapter.
1910 # bge: Support for gigabit ethernet adapters based on the Broadcom
1911 # BCM570x family of controllers, including the 3Com 3c996-T,
1912 # the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
1913 # the embedded gigE NICs on Dell PowerEdge 2550 servers.
1914 # bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet
1916 # bwi: Broadcom BCM430* and BCM431* family of wireless adapters.
1917 # bwn: Broadcom BCM43xx family of wireless adapters.
1918 # cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn
1919 # cm: Arcnet SMC COM90c26 / SMC COM90c56
1920 # (and SMC COM90c66 in '56 compatibility mode) adapters.
1921 # cxgbe: Support for PCI express 10Gb/1Gb adapters based on the Chelsio T4
1922 # (Terminator 4) ASIC.
1923 # dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1924 # and various workalikes including:
1925 # the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1926 # AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1927 # 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1928 # and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1929 # replaces the old al, ax, dm, pn and mx drivers. List of brands:
1930 # Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1931 # SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1932 # LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1934 # de: Digital Equipment DC21040
1935 # em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
1936 # igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters.
1937 # ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
1938 # and PC Card devices using these chipsets.
1939 # ex: Intel EtherExpress Pro/10 and other i82595-based adapters,
1940 # Olicom Ethernet PC Card devices.
1941 # fe: Fujitsu MB86960A/MB86965A Ethernet
1942 # fea: DEC DEFEA EISA FDDI adapter
1943 # fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
1944 # fxp: Intel EtherExpress Pro/100B
1945 # (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping)
1946 # gem: Apple GMAC/Sun ERI/Sun GEM
1947 # hme: Sun HME (Happy Meal Ethernet)
1948 # jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters.
1949 # le: AMD Am7900 LANCE and Am79C9xx PCnet
1950 # lge: Support for PCI gigabit ethernet adapters based on the Level 1
1951 # LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX,
1952 # SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1953 # malo: Marvell Libertas wireless NICs.
1954 # mwl: Marvell 88W8363 802.11n wireless NICs.
1955 # msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect
1956 # Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061,
1957 # 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053,
1958 # 88E8055, 88E8056 and D-Link 560T/550SX.
1959 # lmc: Support for the LMC/SBE wide-area network interface cards.
1960 # my: Myson Fast Ethernet (MTD80X, MTD89X)
1961 # nge: Support for PCI gigabit ethernet adapters based on the National
1962 # Semiconductor DP83820 and DP83821 chipset. This includes the
1963 # SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet
1964 # GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom
1965 # EP-320G-TX and the Netgear GA622T.
1966 # oce: Emulex 10 Gbit adapters (OneConnect Ethernet)
1967 # pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x
1968 # PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home
1969 # chipsets. These can also be handled by the le(4) driver if the
1970 # pcn(4) driver is left out of the kernel. The le(4) driver does not
1971 # support the additional features like the MII bus and burst mode of
1972 # the PCnet-FAST and greater chipsets though.
1973 # ral: Ralink Technology IEEE 802.11 wireless adapter
1974 # re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter
1975 # rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139
1976 # chipset. Note that the RealTek driver defaults to using programmed
1977 # I/O to do register accesses because memory mapped mode seems to cause
1978 # severe lockups on SMP hardware. This driver also supports the
1979 # Accton EN1207D `Cheetah' adapter, which uses a chip called
1980 # the MPX 5030/5038, which is either a RealTek in disguise or a
1981 # RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek
1982 # chipset and is supported by this driver, not the 'vr' driver.
1983 # sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the
1984 # Adaptec AIC-6915 "starfire" controller.
1985 # This includes dual and quad port cards, as well as one 100baseFX card.
1986 # Most of these are 64-bit PCI devices, except for one single port
1987 # card which is 32-bit.
1988 # sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter
1989 # sis: Support for NICs based on the Silicon Integrated Systems SiS 900,
1990 # SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
1991 # sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
1992 # This includes the SK-9841 and SK-9842 single port cards (single mode
1993 # and multimode fiber) and the SK-9843 and SK-9844 dual port cards
1994 # (also single mode and multimode).
1995 # The driver will autodetect the number of ports on the card and
1996 # attach each one as a separate network interface.
1997 # sn: Support for ISA and PC Card Ethernet devices using the
1998 # SMC91C90/92/94/95 chips.
1999 # ste: Sundance Technologies ST201 PCI fast ethernet controller, includes
2000 # the D-Link DFE-550TX.
2001 # stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack
2002 # TC9021 family of controllers, including the Sundance ST2021/ST2023,
2003 # the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101.
2004 # ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks
2005 # Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the
2006 # 3Com 3c985, the Netgear GA620 and various others. Note that you will
2007 # probably want to bump up kern.ipc.nmbclusters a lot to use this driver.
2008 # tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN'
2009 # cards and integrated ethernet controllers. This includes several
2010 # Compaq Netelligent 10/100 cards and the built-in ethernet controllers
2011 # in several Compaq Prosignia, Proliant and Deskpro systems. It also
2012 # supports several Olicom 10Mbps and 10/100 boards.
2013 # tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series)
2014 # txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset
2015 # vr: Support for various fast ethernet adapters based on the VIA
2016 # Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
2017 # including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for
2018 # DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320.
2019 # vte: DM&P Vortex86 RDC R6040 Fast Ethernet
2020 # vx: 3Com 3C590 and 3C595
2021 # wb: Support for fast ethernet adapters based on the Winbond W89C840F chip.
2022 # Note: this is not the same as the Winbond W89C940F, which is a
2024 # wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
2025 # the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
2026 # bridge with a PCMCIA adapter plugged into it.
2027 # xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
2028 # Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
2029 # Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
2030 # xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
2031 # Etherlink XL cards and integrated controllers. This includes the
2032 # integrated 3c905B-TX chips in certain Dell Optiplex and Dell
2033 # Precision desktop machines and the integrated 3c905-TX chips
2034 # in Dell Latitude laptop docking stations.
2035 # Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
2037 # Order for ISA/EISA devices is important here
2041 hint.cm.0.port="0x2e0"
2043 hint.cm.0.maddr="0xdc000"
2048 hint.fe.0.port="0x300"
2052 hint.sn.0.port="0x300"
2058 # PCI Ethernet NICs that use the common MII bus controller code.
2059 device ae # Attansic/Atheros L2 FastEthernet
2060 device age # Attansic/Atheros L1 Gigabit Ethernet
2061 device alc # Atheros AR8131/AR8132 Ethernet
2062 device ale # Atheros AR8121/AR8113/AR8114 Ethernet
2063 device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
2064 device bfe # Broadcom BCM440x 10/100 Ethernet
2065 device bge # Broadcom BCM570xx Gigabit Ethernet
2066 device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
2067 device cxgb # Chelsio T3 10 Gigabit Ethernet
2068 device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware
2069 device dc # DEC/Intel 21143 and various workalikes
2070 device et # Agere ET1310 10/100/Gigabit Ethernet
2071 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
2072 hint.fxp.0.prefer_iomap="0"
2073 device gem # Apple GMAC/Sun ERI/Sun GEM
2074 device hme # Sun HME (Happy Meal Ethernet)
2075 device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
2076 device lge # Level 1 LXT1001 gigabit Ethernet
2077 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
2078 device my # Myson Fast Ethernet (MTD80X, MTD89X)
2079 device nge # NatSemi DP83820 gigabit Ethernet
2080 device re # RealTek 8139C+/8169/8169S/8110S
2081 device rl # RealTek 8129/8139
2082 device pcn # AMD Am79C97x PCI 10/100 NICs
2083 device sf # Adaptec AIC-6915 (``Starfire'')
2084 device sge # Silicon Integrated Systems SiS190/191
2085 device sis # Silicon Integrated Systems SiS 900/SiS 7016
2086 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
2087 device ste # Sundance ST201 (D-Link DFE-550TX)
2088 device stge # Sundance/Tamarack TC9021 gigabit Ethernet
2089 device tl # Texas Instruments ThunderLAN
2090 device tx # SMC EtherPower II (83c170 ``EPIC'')
2091 device vr # VIA Rhine, Rhine II
2092 device vte # DM&P Vortex86 RDC R6040 Fast Ethernet
2093 device wb # Winbond W89C840F
2094 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
2096 # PCI Ethernet NICs.
2097 device cxgbe # Chelsio T4 10GbE PCIe adapter
2098 device de # DEC/Intel DC21x4x (``Tulip'')
2099 device em # Intel Pro/1000 Gigabit Ethernet
2100 device igb # Intel Pro/1000 PCIE Gigabit Ethernet
2101 device ixgb # Intel Pro/10Gbe PCI-X Ethernet
2102 device ixgbe # Intel Pro/10Gbe PCIE Ethernet
2103 device le # AMD Am7900 LANCE and Am79C9xx PCnet
2104 device mxge # Myricom Myri-10G 10GbE NIC
2105 device nxge # Neterion Xframe 10GbE Server/Storage Adapter
2106 device oce # Emulex 10 GbE (OneConnect Ethernet)
2107 device ti # Alteon Networks Tigon I/II gigabit Ethernet
2108 device txp # 3Com 3cR990 (``Typhoon'')
2109 device vx # 3Com 3c590, 3c595 (``Vortex'')
2110 device vxge # Exar/Neterion XFrame 3100 10GbE
2118 # PCI IEEE 802.11 Wireless NICs
2119 device ath # Atheros pci/cardbus NIC's
2120 device ath_hal # pci/cardbus chip support
2121 #device ath_ar5210 # AR5210 chips
2122 #device ath_ar5211 # AR5211 chips
2123 #device ath_ar5212 # AR5212 chips
2130 #device ath_ar5416 # AR5416 chips
2131 options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
2132 # All of the AR5212 parts have a problem when paired with the AR71xx
2133 # CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx
2134 # only. Details of the exact nature of the bug are sketchy, but some can be
2135 # found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and
2136 # 6. This option enables this workaround. There is a performance penalty
2137 # for this work around, but without it things don't work at all. The DMA
2138 # from the card usually bursts 128 bytes, but on the affected CPUs, only
2140 options AH_RXCFG_SDMAMW_4BYTES
2141 #device ath_ar9160 # AR9160 chips
2142 #device ath_ar9280 # AR9280 chips
2143 #device ath_ar9285 # AR9285 chips
2144 device ath_rate_sample # SampleRate tx rate control for ath
2145 device bwi # Broadcom BCM430* BCM431*
2146 device bwn # Broadcom BCM43xx
2147 device malo # Marvell Libertas wireless NICs.
2148 device mwl # Marvell 88W8363 802.11n wireless NICs.
2149 device ral # Ralink Technology RT2500 wireless NICs.
2151 # Use sf_buf(9) interface for jumbo buffers on ti(4) controllers.
2152 #options TI_SF_BUF_JUMBO
2153 # Turn on the header splitting option for the ti(4) driver firmware. This
2154 # only works for Tigon II chips, and has no effect for Tigon I chips.
2155 # This option requires the TI_SF_BUF_JUMBO option above.
2156 #options TI_JUMBO_HDRSPLIT
2159 # Use header splitting feature on bce(4) adapters.
2160 # This may help to reduce the amount of jumbo-sized memory buffers used.
2162 options BCE_JUMBO_HDRSPLIT
2164 # These two options allow manipulating the mbuf cluster size and mbuf size,
2165 # respectively. Be very careful with NIC driver modules when changing
2166 # these from their default values, because that can potentially cause a
2167 # mismatch between the mbuf size assumed by the kernel and the mbuf size
2168 # assumed by a module. The only driver that currently has the ability to
2169 # detect a mismatch is ti(4).
2170 options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB
2171 options MSIZE=512 # mbuf size in bytes
2174 # ATM related options (Cranor version)
2175 # (note: this driver cannot be used with the HARP ATM stack)
2177 # The `en' device provides support for Efficient Networks (ENI)
2178 # ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
2180 # The `hatm' device provides support for Fore/Marconi HE155 and HE622
2183 # The `fatm' device provides support for Fore PCA200E ATM PCI cards.
2185 # The `patm' device provides support for IDT77252 based cards like
2186 # ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards.
2188 # atm device provides generic atm functions and is required for
2190 # NATM enables the netnatm protocol family that can be used to
2193 # utopia provides the access to the ATM PHY chips and is required for en,
2196 # the current driver supports only PVC operations (no atm-arp, no multicast).
2197 # for more details, please read the original documents at
2198 # http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
2202 device fatm #Fore PCA200E
2203 device hatm #Fore/Marconi HE155/622
2204 device patm #IDT77252 cards (ProATM and IDT)
2205 device utopia #ATM PHY driver
2206 options NATM #native ATM
2208 options LIBMBPOOL #needed by patm, iatm
2213 # sound: The generic sound driver.
2219 # snd_*: Device-specific drivers.
2221 # The flags of the device tell the device a bit more info about the
2222 # device that normally is obtained through the PnP interface.
2223 # bit 2..0 secondary DMA channel;
2224 # bit 4 set if the board uses two dma channels;
2225 # bit 15..8 board type, overrides autodetection; leave it
2226 # zero if don't know what to put in (and you don't,
2227 # since this is unsupported at the moment...).
2229 # snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP.
2230 # snd_als4000: Avance Logic ALS4000 PCI.
2231 # snd_atiixp: ATI IXP 200/300/400 PCI.
2232 # snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only
2234 # snd_cmi: CMedia CMI8338/CMI8738 PCI.
2235 # snd_cs4281: Crystal Semiconductor CS4281 PCI.
2236 # snd_csa: Crystal Semiconductor CS461x/428x PCI. (except
2238 # snd_ds1: Yamaha DS-1 PCI.
2239 # snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI.
2240 # snd_emu10kx: Creative SoundBlaster Live! and Audigy
2241 # snd_envy24: VIA Envy24 and compatible, needs snd_spicds.
2242 # snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds.
2243 # snd_es137x: Ensoniq AudioPCI ES137x PCI.
2244 # snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in
2245 # conjunction with snd_sbc.
2246 # snd_fm801: Forte Media FM801 PCI.
2247 # snd_gusc: Gravis UltraSound ISA PnP/non-PnP.
2248 # snd_hda: Intel High Definition Audio (Controller) and
2250 # snd_hdspe: RME HDSPe AIO and RayDAT.
2251 # snd_ich: Intel ICH AC'97 and some more audio controllers
2252 # embedded in a chipset, for example nVidia
2253 # nForce controllers.
2254 # snd_maestro: ESS Technology Maestro-1/2x PCI.
2255 # snd_maestro3: ESS Technology Maestro-3/Allegro PCI.
2256 # snd_mss: Microsoft Sound System ISA PnP/non-PnP.
2257 # snd_neomagic: Neomagic 256 AV/ZX PCI.
2258 # snd_sb16: Creative SoundBlaster16, to be used in
2259 # conjunction with snd_sbc.
2260 # snd_sb8: Creative SoundBlaster (pre-16), to be used in
2261 # conjunction with snd_sbc.
2262 # snd_sbc: Creative SoundBlaster ISA PnP/non-PnP.
2263 # Supports ESS and Avance ISA chips as well.
2264 # snd_solo: ESS Solo-1x PCI.
2265 # snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers.
2266 # snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs
2268 # snd_uaudio: USB audio.
2269 # snd_via8233: VIA VT8233x PCI.
2270 # snd_via82c686: VIA VT82C686A PCI.
2271 # snd_vibes: S3 Sonicvibes PCI.
2304 device snd_via82c686
2307 # For non-PnP sound cards:
2311 hint.pcm.0.flags="0x0"
2313 hint.sbc.0.port="0x220"
2316 hint.sbc.0.flags="0x15"
2317 hint.gusc.0.at="isa"
2318 hint.gusc.0.port="0x220"
2321 hint.gusc.0.flags="0x13"
2324 # Following options are intended for debugging/testing purposes:
2326 # SND_DEBUG Enable extra debugging code that includes
2327 # sanity checking and possible increase of
2330 # SND_DIAGNOSTIC Simmilar in a spirit of INVARIANTS/DIAGNOSTIC,
2331 # zero tolerance against inconsistencies.
2333 # SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled
2334 # in. This options enable most feeder converters
2335 # except for 8bit. WARNING: May bloat the kernel.
2337 # SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well.
2339 # SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic
2340 # as much as possible (the default trying to
2341 # avoid it). Possible slowdown.
2343 # SND_PCM_64 (Only applicable for i386/32bit arch)
2344 # Process 32bit samples through 64bit
2345 # integer/arithmetic. Slight increase of dynamic
2346 # range at a cost of possible slowdown.
2348 # SND_OLDSTEREO Only 2 channels are allowed, effectively
2349 # disabling multichannel processing.
2352 options SND_DIAGNOSTIC
2353 options SND_FEEDER_MULTIFORMAT
2354 options SND_FEEDER_FULL_MULTIFORMAT
2355 options SND_FEEDER_RATE_HP
2357 options SND_OLDSTEREO
2360 # IEEE-488 hardware:
2361 # pcii: PCIIA cards (uPD7210 based isa cards)
2362 # tnt4882: National Instruments PCI-GPIB card.
2365 hint.pcii.0.at="isa"
2366 hint.pcii.0.port="0x2e1"
2373 # Miscellaneous hardware:
2375 # scd: Sony CD-ROM using proprietary (non-ATAPI) interface
2376 # mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface
2377 # bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
2378 # joy: joystick (including IO DATA PCJOY PC Card joystick)
2379 # cmx: OmniKey CardMan 4040 pccard smartcard reader
2384 hint.mcd.0.port="0x300"
2385 # for the Sony CDU31/33A CDROM
2388 hint.scd.0.port="0x230"
2389 device joy # PnP aware, hints for non-PnP only
2391 hint.joy.0.port="0x201"
2395 # The 'bktr' device is a PCI video capture device using the Brooktree
2396 # bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
2397 # TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
2398 # Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
2400 # options OVERRIDE_CARD=xxx
2401 # options OVERRIDE_TUNER=xxx
2402 # options OVERRIDE_MSP=1
2403 # options OVERRIDE_DBX=1
2404 # These options can be used to override the auto detection
2405 # The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
2406 # Using sysctl(8) run-time overrides on a per-card basis can be made
2408 # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
2410 # options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
2411 # Specifies the default video capture mode.
2412 # This is required for Dual Crystal (28&35MHz) boards where PAL is used
2413 # to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI.
2415 # options BKTR_USE_PLL
2416 # This is required for PAL or SECAM boards with a 28MHz crystal and no 35MHz
2417 # crystal, e.g. some new Bt878 cards.
2419 # options BKTR_GPIO_ACCESS
2420 # This enables IOCTLs which give user level access to the GPIO port.
2422 # options BKTR_NO_MSP_RESET
2423 # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
2425 # options BKTR_430_FX_MODE
2426 # Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
2428 # options BKTR_SIS_VIA_MODE
2429 # Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
2430 # needed for some old SiS and VIA chipset motherboards.
2431 # This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
2432 # motherboards and motherboards with bad or incomplete PCI 2.1 support.
2433 # As a rough guess, old = before 1998
2435 # options BKTR_NEW_MSP34XX_DRIVER
2436 # Use new, more complete initialization scheme for the msp34* soundchip.
2437 # Should fix stereo autodetection if the old driver does only output
2441 # options BKTR_USE_FREEBSD_SMBUS
2442 # Compile with FreeBSD SMBus implementation
2444 # Brooktree driver has been ported to the new I2C framework. Thus,
2445 # you'll need to have the following 3 lines in the kernel config.
2450 # The iic and smb devices are only needed if you want to control other
2451 # I2C slaves connected to the external connector of some cards.
2456 # PC Card/PCMCIA and Cardbus
2458 # cbb: pci/cardbus bridge implementing YENTA interface
2459 # pccard: pccard slots
2460 # cardbus: cardbus slots
2469 # mmcsd MMC/SD memory card
2470 # sdhci Generic PCI SD Host Controller
2479 # System Management Bus support is provided by the 'smbus' device.
2480 # Access to the SMBus device is via the 'smb' device (/dev/smb*),
2481 # which is a child of the 'smbus' device.
2483 # Supported devices:
2484 # smb standard I/O through /dev/smb*
2486 # Supported SMB interfaces:
2487 # iicsmb I2C to SMB bridge with any iicbus interface
2488 # bktr brooktree848 I2C hardware interface
2489 # intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
2490 # alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
2491 # ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
2492 # viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit
2493 # amdpm AMD 756 Power Management Unit
2494 # amdsmb AMD 8111 SMBus 2.0 Controller
2495 # nfpm NVIDIA nForce Power Management Unit
2496 # nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
2498 device smbus # Bus support, required for smb below.
2514 # Philips i2c bus support is provided by the `iicbus' device.
2516 # Supported devices:
2517 # ic i2c network interface
2518 # iic i2c standard io
2519 # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
2521 # Supported interfaces:
2522 # bktr brooktree848 I2C software interface
2525 # iicbb generic I2C bit-banging code (needed by lpbb, bktr)
2527 device iicbus # Bus support, required for ic/iic/iicsmb below.
2532 device iicsmb # smb over i2c bridge
2534 # I2C peripheral devices
2536 # ds133x Dallas Semiconductor DS1337, DS1338 and DS1339 RTC
2537 # ds1672 Dallas Semiconductor DS1672 RTC
2544 # Parallel port bus support is provided by the `ppbus' device.
2545 # Multiple devices may be attached to the parallel port, devices
2546 # are automatically probed and attached when found.
2548 # Supported devices:
2549 # vpo Iomega Zip Drive
2550 # Requires SCSI disk support ('scbus' and 'da'), best
2551 # performance is achieved with ports in EPP 1.9 mode.
2552 # lpt Parallel Printer
2553 # plip Parallel network interface
2554 # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
2555 # pps Pulse per second Timing Interface
2556 # lpbb Philips official parallel port I2C bit-banging interface
2557 # pcfclock Parallel port clock driver.
2559 # Supported interfaces:
2560 # ppc ISA-bus parallel port interfaces.
2563 options PPC_PROBE_CHIPSET # Enable chipset specific detection
2564 # (see flags in ppc(4))
2565 options DEBUG_1284 # IEEE1284 signaling protocol debug
2566 options PERIPH_1284 # Makes your computer act as an IEEE1284
2567 # compliant peripheral
2568 options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
2569 options VP0_DEBUG # ZIP/ZIP+ debug
2570 options LPT_DEBUG # Printer driver debug
2571 options PPC_DEBUG # Parallel chipset level debug
2572 options PLIP_DEBUG # Parallel network IP interface debug
2573 options PCFCLOCK_VERBOSE # Verbose pcfclock driver
2574 options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
2588 # Kernel BOOTP support
2590 options BOOTP # Use BOOTP to obtain IP address/hostname
2591 # Requires NFSCLIENT and NFS_ROOT
2592 options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
2593 options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
2594 options BOOTP_COMPAT # Workaround for broken bootp daemons.
2595 options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2596 options BOOTP_BLOCKSIZE=8192 # Override NFS block size
2599 # Add software watchdog routines.
2604 # Add the software deadlock resolver thread.
2609 # Disable swapping of stack pages. This option removes all
2610 # code which actually performs swapping, so it's not possible to turn
2611 # it back on at run-time.
2613 # This is sometimes usable for systems which don't have any swap space
2614 # (see also sysctls "vm.defer_swapspace_pageouts" and
2615 # "vm.disable_swapspace_pageouts")
2617 #options NO_SWAPPING
2619 # Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
2620 # for sendfile(2) that are used to map file VM pages, and normally
2621 # default to a quantity that is roughly 16*MAXUSERS+512. You would
2622 # typically want about 4 of these for each simultaneous file send.
2624 options NSFBUFS=1024
2627 # Enable extra debugging code for locks. This stores the filename and
2628 # line of whatever acquired the lock in the lock itself, and changes a
2629 # number of function calls to pass around the relevant data. This is
2630 # not at all useful unless you are debugging lock code. Also note
2631 # that it is likely to break e.g. fstat(1) unless you recompile your
2632 # userland with -DDEBUG_LOCKS as well.
2637 #####################################################################
2649 # General USB code (mandatory for USB)
2652 # USB Double Bulk Pipe devices
2656 # Human Interface Device (anything with buttons and dials)
2662 # USB mass storage driver (Requires scbus and da)
2664 # USB mass storage driver for device-side mode
2666 # USB support for Belkin F5U109 and Magic Control Technology serial adapters
2675 # eGalax USB touch screen
2677 # Diamond Rio 500 MP3 player
2680 # USB serial support
2682 # USB support for 3G modem cards by Option, Novatel, Huawei and Sierra
2684 # USB support for Technologies ARK3116 based serial adapters
2686 # USB support for Belkin F5U103 and compatible serial adapters
2688 # USB support for serial adapters based on the FT8U100AX and FT8U232AM
2690 # USB support for some Windows CE based serial communication.
2692 # USB support for Prolific PL-2303 serial adapters
2694 # USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters
2696 # USB Visor and Palm devices
2698 # USB serial support for DDI pocket's PHS
2701 # ADMtek USB ethernet. Supports the LinkSys USB100TX,
2702 # the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2703 # and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2707 # ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2708 # LinkSys USB200M and various other adapters.
2712 # Devices which communicate using Ethernet over USB, particularly
2713 # Communication Device Class (CDC) Ethernet specification. Supports
2714 # Sharp Zaurus PDAs, some DOCSIS cable modems and so on.
2717 # CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2718 # and Netmate II, and the Belkin F5U111.
2721 # Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2722 # Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2723 # 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2724 # the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2725 # and 2104USB, and the Corega USB-T.
2728 # RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX
2729 # and the GREEN HOUSE GH-USB100B.
2732 # Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC.
2735 # Moschip MCS7730/MCS7840 USB to fast ethernet. Supports the Sitecom LN030.
2738 # HSxPA devices from Option N.V
2742 # Ralink Technology RT2501USB/RT2601USB wireless driver
2744 # Ralink Technology RT2700U/RT2800U/RT3000U wireless driver
2747 # Atheros AR5523 wireless driver
2750 # Conexant/Intersil PrismGT wireless driver
2753 # Ralink Technology RT2500USB wireless driver
2756 # RNDIS USB ethernet driver
2758 # Realtek RTL8187B/L wireless driver
2761 # ZyDas ZD1211/ZD1211B wireless driver
2765 # debugging options for the USB subsystem
2771 options UKBD_DFLT_KEYMAP # specify the built-in keymap
2772 makeoptions UKBD_DFLT_KEYMAP=it.iso
2774 # options for uplcom:
2775 options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval
2778 # options for uvscom:
2779 options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size
2780 options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval
2783 #####################################################################
2786 device firewire # FireWire bus code
2787 device sbp # SCSI over Firewire (Requires scbus and da)
2788 device sbp_targ # SBP-2 Target mode (Requires scbus and targ)
2789 device fwe # Ethernet over FireWire (non-standard!)
2790 device fwip # IP over FireWire (RFC2734 and RFC3146)
2792 #####################################################################
2793 # dcons support (Dumb Console Device)
2795 device dcons # dumb console driver
2796 device dcons_crom # FireWire attachment
2797 options DCONS_BUF_SIZE=16384 # buffer size
2798 options DCONS_POLL_HZ=100 # polling rate
2799 options DCONS_FORCE_CONSOLE=0 # force to be the primary console
2800 options DCONS_FORCE_GDB=1 # force to be the gdb device
2802 #####################################################################
2805 # This is a port of the OpenBSD crypto framework. Include this when
2806 # configuring IPSEC and when you have a h/w crypto device to accelerate
2807 # user applications that link to OpenSSL.
2809 # Drivers are ports from OpenBSD with some simple enhancements that have
2810 # been fed back to OpenBSD.
2812 device crypto # core crypto support
2813 device cryptodev # /dev/crypto for access to h/w
2815 device rndtest # FIPS 140-2 entropy tester
2817 device hifn # Hifn 7951, 7781, etc.
2818 options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2819 options HIFN_RNDTEST # enable rndtest support
2821 device ubsec # Broadcom 5501, 5601, 58xx
2822 options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2823 options UBSEC_RNDTEST # enable rndtest support
2825 #####################################################################
2829 # Embedded system options:
2831 # An embedded system might want to run something other than init.
2832 options INIT_PATH=/sbin/init:/stand/sysinstall
2835 options BUS_DEBUG # enable newbus debugging
2836 options DEBUG_VFS_LOCKS # enable VFS lock debugging
2837 options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking
2842 # Make the SYSINIT process performed by mi_startup() verbose. This is very
2843 # useful when porting to a new architecture. If DDB is also enabled, this
2844 # will print function names instead of addresses.
2845 options VERBOSE_SYSINIT
2847 #####################################################################
2848 # SYSV IPC KERNEL PARAMETERS
2850 # Maximum number of System V semaphores that can be used on the system at
2854 # Total number of semaphores system wide
2857 # Total number of undo structures in system
2860 # Maximum number of System V semaphores that can be used by a single process
2864 # Maximum number of operations that can be outstanding on a single System V
2865 # semaphore at one time.
2868 # Maximum number of undo operations that can be outstanding on a single
2869 # System V semaphore at one time.
2872 # Maximum number of shared memory pages system wide.
2875 # Maximum size, in bytes, of a single System V shared memory region.
2876 options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
2877 options SHMMAXPGS=1025
2879 # Minimum size, in bytes, of a single System V shared memory region.
2882 # Maximum number of shared memory regions that can be used on the system
2886 # Maximum number of System V shared memory regions that can be attached to
2887 # a single process at one time.
2890 # Compress user core dumps.
2891 options COMPRESS_USER_CORES
2892 # required to compress file output from kernel for COMPRESS_USER_CORES.
2895 # Set the amount of time (in seconds) the system will wait before
2896 # rebooting automatically when a kernel panic occurs. If set to (-1),
2897 # the system will wait indefinitely until a key is pressed on the
2899 options PANIC_REBOOT_WAIT_TIME=16
2901 # Attempt to bypass the buffer cache and put data directly into the
2902 # userland buffer for read operation when O_DIRECT flag is set on the
2903 # file. Both offset and length of the read operation must be
2904 # multiples of the physical media sector size.
2908 # Specify a lower limit for the number of swap I/O buffers. They are
2909 # (among other things) used when bypassing the buffer cache due to
2910 # DIRECTIO kernel option enabled and O_DIRECT flag set on file.
2912 options NSWBUF_MIN=120
2914 #####################################################################
2916 # More undocumented options for linting.
2917 # Note that documenting these is not considered an affront.
2919 options CAM_DEBUG_DELAY
2921 # VFS cluster debugging.
2922 options CLUSTERDEBUG
2926 # Kernel filelock debugging.
2929 # System V compatible message queues
2930 # Please note that the values provided here are used to test kernel
2931 # building. The defaults in the sources provide almost the same numbers.
2932 # MSGSSZ must be a power of 2 between 8 and 1024.
2933 options MSGMNB=2049 # Max number of chars in queue
2934 options MSGMNI=41 # Max number of message queue identifiers
2935 options MSGSEG=2049 # Max number of message segments
2936 options MSGSSZ=16 # Size of a message segment
2937 options MSGTQL=41 # Max number of messages in system
2939 options NBUF=512 # Number of buffer headers
2941 options SCSI_NCR_DEBUG
2942 options SCSI_NCR_MAX_SYNC=10000
2943 options SCSI_NCR_MAX_WIDE=1
2944 options SCSI_NCR_MYADDR=7
2946 options SC_DEBUG_LEVEL=5 # Syscons debug level
2947 options SC_RENDER_DEBUG # syscons rendering debugging
2949 options VFS_BIO_DEBUG # VFS buffer I/O debugging
2951 options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack
2953 # Adaptec Array Controller driver options
2954 options AAC_DEBUG # Debugging levels:
2955 # 0 - quiet, only emit warnings
2956 # 1 - noisy, emit major function
2957 # points and things done
2958 # 2 - extremely noisy, emit trace
2959 # items in loops, etc.
2961 # Resource Accounting
2967 # Yet more undocumented options for linting.
2968 # BKTR_ALLOC_PAGES has no effect except to cause warnings, and
2969 # BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the
2970 # driver still mostly spells this option BROOKTREE_ALLOC_PAGES.
2971 ##options BKTR_ALLOC_PAGES=(217*4+1)
2972 options BROOKTREE_ALLOC_PAGES=(217*4+1)
2973 options MAXFILES=999