3 # On the handling of kernel options
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affects only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
34 AACRAID_DEBUG opt_aacraid.h
35 AHC_ALLOW_MEMIO opt_aic7xxx.h
36 AHC_TMODE_ENABLE opt_aic7xxx.h
37 AHC_DUMP_EEPROM opt_aic7xxx.h
38 AHC_DEBUG opt_aic7xxx.h
39 AHC_DEBUG_OPTS opt_aic7xxx.h
40 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
41 AHD_DEBUG opt_aic79xx.h
42 AHD_DEBUG_OPTS opt_aic79xx.h
43 AHD_TMODE_ENABLE opt_aic79xx.h
44 AHD_REG_PRETTY_PRINT opt_aic79xx.h
45 ADW_ALLOW_MEMIO opt_adw.h
48 TWA_FLASH_FIRMWARE opt_twa.h
51 ALT_BREAK_TO_DEBUGGER opt_kdb.h
52 BREAK_TO_DEBUGGER opt_kdb.h
54 DDB_BUFR_SIZE opt_ddb.h
55 DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
56 DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
62 KDB_UNATTENDED opt_kdb.h
64 SYSCTL_DEBUG opt_sysctl.h
65 EARLY_PRINTF opt_global.h
66 TEXTDUMP_PREFERRED opt_ddb.h
67 TEXTDUMP_VERBOSE opt_ddb.h
69 # Miscellaneous options.
72 ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h
73 ATSE_CFI_HACK opt_cfi.h
75 BOOTHOWTO opt_global.h
76 BOOTVERBOSE opt_global.h
78 CAPABILITIES opt_capsicum.h
79 CAPABILITY_MODE opt_capsicum.h
80 COMPAT_43 opt_compat.h
81 COMPAT_43TTY opt_compat.h
82 COMPAT_FREEBSD4 opt_compat.h
83 COMPAT_FREEBSD5 opt_compat.h
84 COMPAT_FREEBSD6 opt_compat.h
85 COMPAT_FREEBSD7 opt_compat.h
86 COMPILING_LINT opt_global.h
87 COMPRESS_USER_CORES opt_core.h
89 DEADLKRES opt_watchdog.h
93 FULL_PREEMPTION opt_sched.h
94 IPI_PREEMPTION opt_sched.h
99 GEOM_CONCAT opt_geom.h
103 GEOM_JOURNAL opt_geom.h
104 GEOM_LABEL opt_geom.h
105 GEOM_LINUX_LVM opt_geom.h
107 GEOM_MIRROR opt_geom.h
108 GEOM_MULTIPATH opt_geom.h
110 GEOM_PART_APM opt_geom.h
111 GEOM_PART_BSD opt_geom.h
112 GEOM_PART_EBR opt_geom.h
113 GEOM_PART_EBR_COMPAT opt_geom.h
114 GEOM_PART_GPT opt_geom.h
115 GEOM_PART_LDM opt_geom.h
116 GEOM_PART_MBR opt_geom.h
117 GEOM_PART_PC98 opt_geom.h
118 GEOM_PART_VTOC8 opt_geom.h
121 GEOM_RAID3 opt_geom.h
122 GEOM_SHSEC opt_geom.h
123 GEOM_STRIPE opt_geom.h
124 GEOM_SUNLABEL opt_geom.h
125 GEOM_UNCOMPRESS opt_geom.h
127 GEOM_VINUM opt_geom.h
128 GEOM_VIRSTOR opt_geom.h
131 KDTRACE_HOOKS opt_kdtrace.h
135 KTRACE_REQUEST_POOL opt_ktrace.h
138 MAC_BIBA opt_dontuse.h
139 MAC_BSDEXTENDED opt_dontuse.h
140 MAC_IFOFF opt_dontuse.h
141 MAC_LOMAC opt_dontuse.h
142 MAC_MLS opt_dontuse.h
143 MAC_NONE opt_dontuse.h
144 MAC_PARTITION opt_dontuse.h
145 MAC_PORTACL opt_dontuse.h
146 MAC_SEEOTHERUIDS opt_dontuse.h
148 MAC_STUB opt_dontuse.h
149 MAC_TEST opt_dontuse.h
151 MD_ROOT_FSTYPE opt_md.h
152 MD_ROOT_SIZE opt_md.h
154 MFI_DECODE_LOG opt_mfi.h
155 MPROF_BUFFERS opt_mprof.h
156 MPROF_HASH_SIZE opt_mprof.h
157 NEW_PCIB opt_global.h
158 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
161 NO_EVENTTIMERS opt_timer.h
162 NO_SYSCTL_DESCR opt_global.h
163 NSWBUF_MIN opt_swap.h
164 MBUF_PACKET_ZONE_DISABLE opt_global.h
165 PANIC_REBOOT_WAIT_TIME opt_panic.h
167 PPC_PROBE_CHIPSET opt_ppc.h
169 PREEMPTION opt_sched.h
170 PROCDESC opt_procdesc.h
172 SCHED_4BSD opt_sched.h
173 SCHED_STATS opt_sched.h
174 SCHED_ULE opt_sched.h
176 SLHCI_DEBUG opt_slhci.h
193 SHMMAXPGS opt_sysvipc.h
197 SYSVMSG opt_sysvipc.h
198 SYSVSEM opt_sysvipc.h
199 SYSVSHM opt_sysvipc.h
200 SW_WATCHDOG opt_watchdog.h
204 VERBOSE_SYSINIT opt_global.h
205 WLCACHE opt_wavelan.h
206 WLDEBUG opt_wavelan.h
208 # POSIX kernel options
209 P1003_1B_MQUEUE opt_posix.h
210 P1003_1B_SEMAPHORES opt_posix.h
211 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
213 # Do we want the config file compiled into the kernel?
214 INCLUDE_CONFIG_FILE opt_config.h
216 # Options for static filesystems. These should only be used at config
217 # time, since the corresponding lkms cannot work if there are any static
218 # dependencies. Unusability is enforced by hiding the defines for the
219 # options in a never-included header.
222 FDESCFS opt_dontuse.h
225 MSDOSFS opt_dontuse.h
229 PSEUDOFS opt_dontuse.h
230 REISERFS opt_dontuse.h
234 UNIONFS opt_dontuse.h
238 PSEUDOFS_TRACE opt_pseudofs.h
241 KGSSAPI opt_kgssapi.h
242 KGSSAPI_DEBUG opt_kgssapi.h
244 # These static filesystems have one slightly bogus static dependency in
245 # sys/i386/i386/autoconf.c. If any of these filesystems are
246 # statically compiled into the kernel, code for mounting them as root
247 # filesystems will be enabled - but look below.
251 # Use these options to compile the experimental nfs client and/or
252 # server that supports NFSv4 into a kernel.
258 # filesystems and libiconv bridge
259 CD9660_ICONV opt_dontuse.h
260 MSDOSFS_ICONV opt_dontuse.h
261 UDF_ICONV opt_dontuse.h
263 # If you are following the conditions in the copyright,
264 # you can enable soft-updates which will speed up a lot of thigs
265 # and make the system safer from crashes at the same time.
266 # otherwise a STUB module will be compiled in.
267 SOFTUPDATES opt_ffs.h
269 # On small, embedded systems, it can be useful to turn off support for
270 # snapshots. It saves about 30-40k for a feature that would be lightly
271 # used, if it is used at all.
272 NO_FFS_SNAPSHOT opt_ffs.h
274 # Enabling this option turns on support for Access Control Lists in UFS,
275 # which can be used to support high security configurations. Depends on
279 # Enabling this option turns on support for extended attributes in UFS-based
280 # filesystems, which can be used to support high security configurations
281 # as well as new filesystem features.
282 UFS_EXTATTR opt_ufs.h
283 UFS_EXTATTR_AUTOSTART opt_ufs.h
285 # Enable fast hash lookups for large directories on UFS-based filesystems.
286 UFS_DIRHASH opt_ufs.h
288 # Enable gjournal-based UFS journal.
289 UFS_GJOURNAL opt_ufs.h
291 # The below sentence is not in English, and neither is this one.
292 # We plan to remove the static dependences above, with a
293 # <filesystem>_ROOT option to control if it usable as root. This list
294 # allows these options to be present in config files already (though
295 # they won't make any difference yet).
296 NFS_ROOT opt_nfsroot.h
301 # Options used only in subr_param.c.
306 VM_BCACHE_SIZE_MAX opt_param.h
307 VM_SWZONE_SIZE_MAX opt_param.h
313 # Generic SCSI options.
314 CAM_MAX_HIGHPOWER opt_cam.h
316 CAM_DEBUG_COMPILE opt_cam.h
317 CAM_DEBUG_DELAY opt_cam.h
318 CAM_DEBUG_BUS opt_cam.h
319 CAM_DEBUG_TARGET opt_cam.h
320 CAM_DEBUG_LUN opt_cam.h
321 CAM_DEBUG_FLAGS opt_cam.h
322 CAM_BOOT_DELAY opt_cam.h
323 SCSI_DELAY opt_scsi.h
324 SCSI_NO_SENSE_STRINGS opt_scsi.h
325 SCSI_NO_OP_STRINGS opt_scsi.h
327 # Options used only in cam/ata/ata_da.c
328 ADA_TEST_FAILURE opt_ada.h
329 ATA_STATIC_ID opt_ada.h
331 # Options used only in cam/scsi/scsi_cd.c
332 CHANGER_MIN_BUSY_SECONDS opt_cd.h
333 CHANGER_MAX_BUSY_SECONDS opt_cd.h
335 # Options used only in cam/scsi/scsi_sa.c.
336 SA_IO_TIMEOUT opt_sa.h
337 SA_SPACE_TIMEOUT opt_sa.h
338 SA_REWIND_TIMEOUT opt_sa.h
339 SA_ERASE_TIMEOUT opt_sa.h
340 SA_1FM_AT_EOD opt_sa.h
342 # Options used only in cam/scsi/scsi_pt.c
343 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
345 # Options used only in cam/scsi/scsi_ses.c
346 SES_ENABLE_PASSTHROUGH opt_ses.h
348 # Options used in dev/sym/ (Symbios SCSI driver).
349 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
350 # Allows the ncr to take precedence
351 # 1 (1<<0) -> 810a, 860
352 # 2 (1<<1) -> 825a, 875, 885, 895
353 # 4 (1<<2) -> 895a, 896, 1510d
354 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
355 # disabled:0 (default), enabled:1
356 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
357 # disabled:0, enabled:1 (default)
358 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
359 # default:8, range:[1..64]
361 # Options used only in pci/ncr.c
362 SCSI_NCR_DEBUG opt_ncr.h
363 SCSI_NCR_MAX_SYNC opt_ncr.h
364 SCSI_NCR_MAX_WIDE opt_ncr.h
365 SCSI_NCR_MYADDR opt_ncr.h
367 # Options used only in dev/isp/*
368 ISP_TARGET_MODE opt_isp.h
369 ISP_FW_CRASH_DUMP opt_isp.h
370 ISP_DEFAULT_ROLES opt_isp.h
371 ISP_INTERNAL_TARGET opt_isp.h
373 # Options used only in dev/iscsi
374 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
383 ALTQ_DEBUG opt_altq.h
385 ALTQ_NOPCC opt_altq.h
390 BOOTP_BLOCKSIZE opt_bootp.h
391 BOOTP_COMPAT opt_bootp.h
392 BOOTP_NFSROOT opt_bootp.h
393 BOOTP_NFSV3 opt_bootp.h
394 BOOTP_WIRED_TO opt_bootp.h
409 IPFILTER opt_ipfilter.h
410 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
411 IPFILTER_LOG opt_ipfilter.h
412 IPFILTER_LOOKUP opt_ipfilter.h
413 IPFIREWALL opt_ipfw.h
414 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
415 IPFIREWALL_NAT opt_ipfw.h
416 IPFIREWALL_VERBOSE opt_ipfw.h
417 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
419 IPSEC_DEBUG opt_ipsec.h
420 IPSEC_FILTERTUNNEL opt_ipsec.h
421 IPSEC_NAT_T opt_ipsec.h
430 MROUTING opt_mrouting.h
433 PCBGROUP opt_pcbgroup.h
434 PF_DEFAULT_TO_DROP opt_pf.h
435 RADIX_MPATH opt_mpath.h
436 ROUTETABLES opt_route.h
437 SLIP_IFF_OPTS opt_slip.h
439 TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading
440 TCP_SIGNATURE opt_inet.h
441 VLAN_ARRAY opt_vlan.h
443 FLOWTABLE opt_route.h
444 FLOWTABLE_HASH_ALL opt_route.h
450 SCTP_DEBUG opt_sctp.h # Enable debug printfs
451 SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
452 SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
453 SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
454 SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
455 SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
456 SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
457 SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
458 SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
459 SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
460 SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl
465 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
466 # Each netgraph node type can be either be compiled into the kernel
467 # or loaded dynamically. To get the former, include the corresponding
468 # option below. Each type has its own man page, e.g. ng_async(4).
470 NETGRAPH_DEBUG opt_netgraph.h
471 NETGRAPH_ASYNC opt_netgraph.h
472 NETGRAPH_ATMLLC opt_netgraph.h
473 NETGRAPH_ATM_ATMPIF opt_netgraph.h
474 NETGRAPH_BLUETOOTH opt_netgraph.h
475 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
476 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
477 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
478 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
479 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
480 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
481 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
482 NETGRAPH_BPF opt_netgraph.h
483 NETGRAPH_BRIDGE opt_netgraph.h
484 NETGRAPH_CAR opt_netgraph.h
485 NETGRAPH_CISCO opt_netgraph.h
486 NETGRAPH_DEFLATE opt_netgraph.h
487 NETGRAPH_DEVICE opt_netgraph.h
488 NETGRAPH_ECHO opt_netgraph.h
489 NETGRAPH_EIFACE opt_netgraph.h
490 NETGRAPH_ETHER opt_netgraph.h
491 NETGRAPH_ETHER_ECHO opt_netgraph.h
492 NETGRAPH_FEC opt_netgraph.h
493 NETGRAPH_FRAME_RELAY opt_netgraph.h
494 NETGRAPH_GIF opt_netgraph.h
495 NETGRAPH_GIF_DEMUX opt_netgraph.h
496 NETGRAPH_HOLE opt_netgraph.h
497 NETGRAPH_IFACE opt_netgraph.h
498 NETGRAPH_IP_INPUT opt_netgraph.h
499 NETGRAPH_IPFW opt_netgraph.h
500 NETGRAPH_KSOCKET opt_netgraph.h
501 NETGRAPH_L2TP opt_netgraph.h
502 NETGRAPH_LMI opt_netgraph.h
503 # MPPC compression requires proprietary files (not included)
504 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
505 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
506 NETGRAPH_NAT opt_netgraph.h
507 NETGRAPH_NETFLOW opt_netgraph.h
508 NETGRAPH_ONE2MANY opt_netgraph.h
509 NETGRAPH_PATCH opt_netgraph.h
510 NETGRAPH_PIPE opt_netgraph.h
511 NETGRAPH_PPP opt_netgraph.h
512 NETGRAPH_PPPOE opt_netgraph.h
513 NETGRAPH_PPTPGRE opt_netgraph.h
514 NETGRAPH_PRED1 opt_netgraph.h
515 NETGRAPH_RFC1490 opt_netgraph.h
516 NETGRAPH_SOCKET opt_netgraph.h
517 NETGRAPH_SPLIT opt_netgraph.h
518 NETGRAPH_SPPP opt_netgraph.h
519 NETGRAPH_TAG opt_netgraph.h
520 NETGRAPH_TCPMSS opt_netgraph.h
521 NETGRAPH_TEE opt_netgraph.h
522 NETGRAPH_TTY opt_netgraph.h
523 NETGRAPH_UI opt_netgraph.h
524 NETGRAPH_VJC opt_netgraph.h
525 NETGRAPH_VLAN opt_netgraph.h
528 NGATM_ATM opt_netgraph.h
529 NGATM_ATMBASE opt_netgraph.h
530 NGATM_SSCOP opt_netgraph.h
531 NGATM_SSCFU opt_netgraph.h
532 NGATM_UNI opt_netgraph.h
533 NGATM_CCATM opt_netgraph.h
538 TI_SF_BUF_JUMBO opt_ti.h
539 TI_JUMBO_HDRSPLIT opt_ti.h
541 # XXX Conflict: # of devices vs network protocol (Native ATM).
542 # This makes "atm.h" unusable.
545 # DPT driver debug flags
546 DPT_MEASURE_PERFORMANCE opt_dpt.h
547 DPT_RESET_HBA opt_dpt.h
549 # Misc debug flags. Most of these should probably be replaced with
550 # 'DEBUG', and then let people recompile just the interesting modules
551 # with 'make CC="cc -DDEBUG"'.
552 CLUSTERDEBUG opt_debug_cluster.h
553 DEBUG_1284 opt_ppb_1284.h
556 PLIP_DEBUG opt_plip.h
557 LOCKF_DEBUG opt_debug_lockf.h
558 NETATALKDEBUG opt_atalk.h
559 SI_DEBUG opt_debug_si.h
563 FB_INSTALL_CDEV opt_fb.h
565 # ppbus related options
566 PERIPH_1284 opt_ppb_1284.h
567 DONTPROBE_1284 opt_ppb_1284.h
569 # smbus related options
570 ENABLE_ALART opt_intpm.h
572 # These cause changes all over the kernel
573 BLKDEV_IOSIZE opt_global.h
574 BURN_BRIDGES opt_global.h
576 DEBUG_LOCKS opt_global.h
577 DEBUG_VFS_LOCKS opt_global.h
578 DFLTPHYS opt_global.h
579 DIAGNOSTIC opt_global.h
580 INVARIANT_SUPPORT opt_global.h
581 INVARIANTS opt_global.h
583 MAXMEMDOM opt_global.h
585 MCLSHIFT opt_global.h
586 MUTEX_DEBUG opt_global.h
587 MUTEX_NOINLINE opt_global.h
588 LOCK_PROFILING opt_global.h
589 LOCK_PROFILING_FAST opt_global.h
591 REGRESSION opt_global.h
592 RWLOCK_NOINLINE opt_global.h
593 SX_NOINLINE opt_global.h
594 VFS_BIO_DEBUG opt_global.h
596 # These are VM related options
597 VM_KMEM_SIZE opt_vm.h
598 VM_KMEM_SIZE_SCALE opt_vm.h
599 VM_KMEM_SIZE_MAX opt_vm.h
600 VM_NRESERVLEVEL opt_vm.h
601 VM_LEVEL_0_ORDER opt_vm.h
603 MALLOC_MAKE_FAILURES opt_vm.h
604 MALLOC_PROFILE opt_vm.h
605 MALLOC_DEBUG_MAXZONES opt_vm.h
607 # The MemGuard replacement allocator used for tamper-after-free detection
608 DEBUG_MEMGUARD opt_vm.h
610 # The RedZone malloc(9) protection
611 DEBUG_REDZONE opt_vm.h
613 # Standard SMP options
616 # Size of the kernel message buffer
617 MSGBUF_SIZE opt_msgbuf.h
620 NFS_MINATTRTIMO opt_nfs.h
621 NFS_MAXATTRTIMO opt_nfs.h
622 NFS_MINDIRATTRTIMO opt_nfs.h
623 NFS_MAXDIRATTRTIMO opt_nfs.h
624 NFS_GATHERDELAY opt_nfs.h
625 NFS_WDELAYHASHSIZ opt_nfs.h
628 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
629 OVERRIDE_CARD opt_bktr.h
630 OVERRIDE_TUNER opt_bktr.h
631 OVERRIDE_DBX opt_bktr.h
632 OVERRIDE_MSP opt_bktr.h
633 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
634 BROOKTREE_ALLOC_PAGES opt_bktr.h
635 BKTR_OVERRIDE_CARD opt_bktr.h
636 BKTR_OVERRIDE_TUNER opt_bktr.h
637 BKTR_OVERRIDE_DBX opt_bktr.h
638 BKTR_OVERRIDE_MSP opt_bktr.h
639 BKTR_SYSTEM_DEFAULT opt_bktr.h
640 BKTR_ALLOC_PAGES opt_bktr.h
641 BKTR_USE_PLL opt_bktr.h
642 BKTR_GPIO_ACCESS opt_bktr.h
643 BKTR_NO_MSP_RESET opt_bktr.h
644 BKTR_430_FX_MODE opt_bktr.h
645 BKTR_SIS_VIA_MODE opt_bktr.h
646 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
647 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
649 # Options for uart(4)
650 UART_PPS_ON_CTS opt_uart.h
651 UART_POLL_FREQ opt_uart.h
653 # options for bus/device framework
656 # options for USB support
658 USB_HOST_ALIGN opt_usb.h
659 USB_REQ_DEBUG opt_usb.h
660 USB_TEMPLATE opt_usb.h
661 USB_VERBOSE opt_usb.h
662 USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
664 UKBD_DFLT_KEYMAP opt_ukbd.h
665 UPLCOM_INTR_INTERVAL opt_uplcom.h
666 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
667 UVSCOM_INTR_INTERVAL opt_uvscom.h
669 # Embedded system options
675 PCFCLOCK_VERBOSE opt_pcfclock.h
676 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
681 KTR_CPUMASK opt_ktr.h
682 KTR_COMPILE opt_global.h
683 KTR_BOOT_ENTRIES opt_global.h
684 KTR_ENTRIES opt_global.h
685 KTR_VERBOSE opt_ktr.h
687 WITNESS_KDB opt_witness.h
688 WITNESS_NO_VNODE opt_witness.h
689 WITNESS_SKIPSPIN opt_witness.h
690 OPENSOLARIS_WITNESS opt_global.h
692 # options for ACPI support
693 ACPI_DEBUG opt_acpi.h
694 ACPI_MAX_TASKS opt_acpi.h
695 ACPI_MAX_THREADS opt_acpi.h
702 # various 'device presence' options.
704 DEV_NETMAP opt_global.h
707 DEV_SPLASH opt_splash.h
711 EISA_SLOTS opt_eisa.h
720 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
722 SOCKBUF_DEBUG opt_global.h
725 # options for ubsec driver
726 UBSEC_DEBUG opt_ubsec.h
727 UBSEC_RNDTEST opt_ubsec.h
728 UBSEC_NO_RNG opt_ubsec.h
730 # options for hifn driver
731 HIFN_DEBUG opt_hifn.h
732 HIFN_RNDTEST opt_hifn.h
734 # options for safenet driver
735 SAFE_DEBUG opt_safe.h
736 SAFE_NO_RNG opt_safe.h
737 SAFE_RNDTEST opt_safe.h
740 MAXCONS opt_syscons.h
741 VT_FB_DEFAULT_WIDTH opt_syscons.h
742 VT_FB_DEFAULT_HEIGHT opt_syscons.h
743 SC_ALT_MOUSE_IMAGE opt_syscons.h
744 SC_CUT_SPACES2TABS opt_syscons.h
745 SC_CUT_SEPCHARS opt_syscons.h
746 SC_DEBUG_LEVEL opt_syscons.h
747 SC_DFLT_FONT opt_syscons.h
748 SC_DISABLE_KDBKEY opt_syscons.h
749 SC_DISABLE_REBOOT opt_syscons.h
750 SC_HISTORY_SIZE opt_syscons.h
751 SC_KERNEL_CONS_ATTR opt_syscons.h
752 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
753 SC_MOUSE_CHAR opt_syscons.h
754 SC_NO_CUTPASTE opt_syscons.h
755 SC_NO_FONT_LOADING opt_syscons.h
756 SC_NO_HISTORY opt_syscons.h
757 SC_NO_MODE_CHANGE opt_syscons.h
758 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
759 SC_NO_SYSMOUSE opt_syscons.h
760 SC_NORM_ATTR opt_syscons.h
761 SC_NORM_REV_ATTR opt_syscons.h
762 SC_PIXEL_MODE opt_syscons.h
763 SC_RENDER_DEBUG opt_syscons.h
764 SC_TWOBUTTON_MOUSE opt_syscons.h
768 # teken terminal emulator options
769 TEKEN_CONS25 opt_teken.h
770 TEKEN_UTF8 opt_teken.h
771 TERMINAL_KERN_ATTR opt_teken.h
772 TERMINAL_NORM_ATTR opt_teken.h
775 PRINTF_BUFR_SIZE opt_printf.h
778 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
779 KBD_INSTALL_CDEV opt_kbd.h
780 KBD_MAXRETRY opt_kbd.h
781 KBD_MAXWAIT opt_kbd.h
782 KBD_RESETDELAY opt_kbd.h
783 KBDIO_DEBUG opt_kbd.h
785 # options for the Atheros driver
789 ATH_DIAGAPI opt_ath.h
790 ATH_TX99_DIAG opt_ath.h
791 ATH_ENABLE_11N opt_ath.h
792 ATH_ENABLE_DFS opt_ath.h
793 ATH_EEPROM_FIRMWARE opt_ath.h
794 ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
795 ATH_DEBUG_ALQ opt_ath.h
796 ATH_KTR_INTR_DEBUG opt_ath.h
798 # options for the Atheros hal
799 AH_SUPPORT_AR5416 opt_ah.h
800 # XXX For now, this breaks non-AR9130 chipsets, so only use it
801 # XXX when actually targetting AR9130.
802 AH_SUPPORT_AR9130 opt_ah.h
804 # This is required for AR933x SoC support
805 AH_SUPPORT_AR9330 opt_ah.h
806 AH_SUPPORT_AR9340 opt_ah.h
810 AH_DEBUG_ALQ opt_ah.h
811 AH_REGOPS_FUNC opt_ah.h
812 AH_WRITE_REGDOMAIN opt_ah.h
813 AH_DEBUG_COUNTRY opt_ah.h
814 AH_WRITE_EEPROM opt_ah.h
815 AH_PRIVATE_DIAG opt_ah.h
816 AH_NEED_DESC_SWAP opt_ah.h
817 AH_USE_INIPDGAIN opt_ah.h
819 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
820 AH_INTERRUPT_DEBUGGING opt_ah.h
821 # AR5416 and later interrupt mitigation
822 # XXX do not use this for AR9130
823 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
825 # options for the Broadcom BCM43xx driver (bwi)
827 BWI_DEBUG_VERBOSE opt_bwi.h
829 # options for the Marvell 8335 wireless driver
830 MALO_DEBUG opt_malo.h
831 MALO_TXBUF opt_malo.h
832 MALO_RXBUF opt_malo.h
834 # options for the Marvell wireless driver
838 MWL_DIAGAPI opt_mwl.h
839 MWL_AGGR_SIZE opt_mwl.h
840 MWL_TX_NODROP opt_mwl.h
842 # Options for the Intel 802.11n wireless driver
846 DCONS_BUF_SIZE opt_dcons.h
847 DCONS_POLL_HZ opt_dcons.h
848 DCONS_FORCE_CONSOLE opt_dcons.h
849 DCONS_FORCE_GDB opt_dcons.h
853 HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h
855 # XBOX options for FreeBSD/i386, but some files are MI
858 # Interrupt filtering
861 # 802.11 support layer
862 IEEE80211_DEBUG opt_wlan.h
863 IEEE80211_DEBUG_REFCNT opt_wlan.h
864 IEEE80211_AMPDU_AGE opt_wlan.h
865 IEEE80211_SUPPORT_MESH opt_wlan.h
866 IEEE80211_SUPPORT_SUPERG opt_wlan.h
867 IEEE80211_SUPPORT_TDMA opt_wlan.h
868 IEEE80211_ALQ opt_wlan.h
869 IEEE80211_DFS_DEBUG opt_wlan.h
871 # 802.11 TDMA support
872 TDMA_SLOTLEN_DEFAULT opt_tdma.h
873 TDMA_SLOTCNT_DEFAULT opt_tdma.h
874 TDMA_BINTVAL_DEFAULT opt_tdma.h
875 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
876 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
877 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
878 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
879 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
880 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
881 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
882 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
884 # Network stack virtualization options
886 VNET_DEBUG opt_global.h
888 # Common Flash Interface (CFI) options
889 CFI_SUPPORT_STRATAFLASH opt_cfi.h
890 CFI_ARMEDANDDANGEROUS opt_cfi.h
894 SND_DIAGNOSTIC opt_snd.h
895 SND_FEEDER_MULTIFORMAT opt_snd.h
896 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
897 SND_FEEDER_RATE_HP opt_snd.h
899 SND_OLDSTEREO opt_snd.h
903 # Flattened device tree options
905 FDT_DTB_STATIC opt_platform.h
907 # OFED Infiniband stack
909 OFED_DEBUG_INIT opt_ofed.h
913 IPOIB_DEBUG opt_ofed.h
916 # Resource Accounting
922 # Random number generator(s)
923 RANDOM_YARROW opt_random.h
924 RANDOM_FORTUNA opt_random.h
925 RANDOM_DEBUG opt_random.h
926 RANDOM_RWFILE opt_random.h