2 * Copyright (c) 2000 Michael Smith
3 * Copyright (c) 2000 BSDi
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
32 #include <sys/param.h>
34 #include <sys/kernel.h>
35 #include <sys/malloc.h>
36 #include <sys/module.h>
38 #include <sys/sysctl.h>
40 #include <contrib/dev/acpica/include/acpi.h>
41 #include <contrib/dev/acpica/include/accommon.h>
43 #include <dev/acpica/acpivar.h>
45 #include <machine/pci_cfgreg.h>
46 #include <dev/pci/pcivar.h>
47 #include <dev/pci/pcib_private.h>
50 #include <dev/acpica/acpi_pcibvar.h>
52 /* Hooks for the ACPI CA debugging infrastructure. */
53 #define _COMPONENT ACPI_BUS
54 ACPI_MODULE_NAME("PCI_ACPI")
56 struct acpi_hpcib_softc {
58 ACPI_HANDLE ap_handle;
61 int ap_segment; /* analagous to Alpha 'hose' */
62 int ap_bus; /* bios-assigned bus number */
64 ACPI_BUFFER ap_prt; /* interrupt routing table */
67 static int acpi_pcib_acpi_probe(device_t bus);
68 static int acpi_pcib_acpi_attach(device_t bus);
69 static int acpi_pcib_read_ivar(device_t dev, device_t child,
70 int which, uintptr_t *result);
71 static int acpi_pcib_write_ivar(device_t dev, device_t child,
72 int which, uintptr_t value);
73 static uint32_t acpi_pcib_read_config(device_t dev, u_int bus,
74 u_int slot, u_int func, u_int reg, int bytes);
75 static void acpi_pcib_write_config(device_t dev, u_int bus,
76 u_int slot, u_int func, u_int reg, uint32_t data,
78 static int acpi_pcib_acpi_route_interrupt(device_t pcib,
79 device_t dev, int pin);
80 static int acpi_pcib_alloc_msi(device_t pcib, device_t dev,
81 int count, int maxcount, int *irqs);
82 static int acpi_pcib_map_msi(device_t pcib, device_t dev,
83 int irq, uint64_t *addr, uint32_t *data);
84 static int acpi_pcib_alloc_msix(device_t pcib, device_t dev,
86 static struct resource *acpi_pcib_acpi_alloc_resource(device_t dev,
87 device_t child, int type, int *rid,
88 u_long start, u_long end, u_long count,
91 static device_method_t acpi_pcib_acpi_methods[] = {
92 /* Device interface */
93 DEVMETHOD(device_probe, acpi_pcib_acpi_probe),
94 DEVMETHOD(device_attach, acpi_pcib_acpi_attach),
95 DEVMETHOD(device_shutdown, bus_generic_shutdown),
96 DEVMETHOD(device_suspend, bus_generic_suspend),
97 DEVMETHOD(device_resume, bus_generic_resume),
100 DEVMETHOD(bus_print_child, bus_generic_print_child),
101 DEVMETHOD(bus_read_ivar, acpi_pcib_read_ivar),
102 DEVMETHOD(bus_write_ivar, acpi_pcib_write_ivar),
103 DEVMETHOD(bus_alloc_resource, acpi_pcib_acpi_alloc_resource),
104 DEVMETHOD(bus_adjust_resource, bus_generic_adjust_resource),
105 DEVMETHOD(bus_release_resource, bus_generic_release_resource),
106 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
107 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
108 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
109 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
112 DEVMETHOD(pcib_maxslots, pcib_maxslots),
113 DEVMETHOD(pcib_read_config, acpi_pcib_read_config),
114 DEVMETHOD(pcib_write_config, acpi_pcib_write_config),
115 DEVMETHOD(pcib_route_interrupt, acpi_pcib_acpi_route_interrupt),
116 DEVMETHOD(pcib_alloc_msi, acpi_pcib_alloc_msi),
117 DEVMETHOD(pcib_release_msi, pcib_release_msi),
118 DEVMETHOD(pcib_alloc_msix, acpi_pcib_alloc_msix),
119 DEVMETHOD(pcib_release_msix, pcib_release_msix),
120 DEVMETHOD(pcib_map_msi, acpi_pcib_map_msi),
125 static devclass_t pcib_devclass;
127 DEFINE_CLASS_0(pcib, acpi_pcib_acpi_driver, acpi_pcib_acpi_methods,
128 sizeof(struct acpi_hpcib_softc));
129 DRIVER_MODULE(acpi_pcib, acpi, acpi_pcib_acpi_driver, pcib_devclass, 0, 0);
130 MODULE_DEPEND(acpi_pcib, acpi, 1, 1, 1);
133 acpi_pcib_acpi_probe(device_t dev)
135 ACPI_DEVICE_INFO *devinfo;
139 if (acpi_disabled("pcib") || (h = acpi_get_handle(dev)) == NULL ||
140 ACPI_FAILURE(AcpiGetObjectInfo(h, &devinfo)))
142 root = (devinfo->Flags & ACPI_PCI_ROOT_BRIDGE) != 0;
144 if (!root || pci_cfgregopen() == 0)
147 device_set_desc(dev, "ACPI Host-PCI bridge");
152 acpi_pcib_acpi_attach(device_t dev)
154 struct acpi_hpcib_softc *sc;
156 static int bus0_seen = 0;
157 u_int addr, slot, func, busok;
160 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
162 sc = device_get_softc(dev);
164 sc->ap_handle = acpi_get_handle(dev);
167 * Get our segment number by evaluating _SEG
168 * It's OK for this to not exist.
170 status = acpi_GetInteger(sc->ap_handle, "_SEG", &sc->ap_segment);
171 if (ACPI_FAILURE(status)) {
172 if (status != AE_NOT_FOUND) {
173 device_printf(dev, "could not evaluate _SEG - %s\n",
174 AcpiFormatException(status));
175 return_VALUE (ENXIO);
177 /* If it's not found, assume 0. */
182 * Get our base bus number by evaluating _BBN.
183 * If this doesn't work, we assume we're bus number 0.
185 * XXX note that it may also not exist in the case where we are
186 * meant to use a private configuration space mechanism for this bus,
187 * so we should dig out our resources and check to see if we have
188 * anything like that. How do we do this?
189 * XXX If we have the requisite information, and if we don't think the
190 * default PCI configuration space handlers can deal with this bus,
191 * we should attach our own handler.
192 * XXX invoke _REG on this for the PCI config space address space?
193 * XXX It seems many BIOS's with multiple Host-PCI bridges do not set
194 * _BBN correctly. They set _BBN to zero for all bridges. Thus,
195 * if _BBN is zero and PCI bus 0 already exists, we try to read our
196 * bus number from the configuration registers at address _ADR.
197 * We only do this for domain/segment 0 in the hopes that this is
198 * only needed for old single-domain machines.
200 status = acpi_GetInteger(sc->ap_handle, "_BBN", &sc->ap_bus);
201 if (ACPI_FAILURE(status)) {
202 if (status != AE_NOT_FOUND) {
203 device_printf(dev, "could not evaluate _BBN - %s\n",
204 AcpiFormatException(status));
205 return_VALUE (ENXIO);
207 /* If it's not found, assume 0. */
213 * If this is segment 0, the bus is zero, and PCI bus 0 already
214 * exists, read the bus number via PCI config space.
217 if (sc->ap_segment == 0 && sc->ap_bus == 0 && bus0_seen) {
219 status = acpi_GetInteger(sc->ap_handle, "_ADR", &addr);
220 if (ACPI_FAILURE(status)) {
221 if (status != AE_NOT_FOUND) {
222 device_printf(dev, "could not evaluate _ADR - %s\n",
223 AcpiFormatException(status));
224 return_VALUE (ENXIO);
226 device_printf(dev, "couldn't find _ADR\n");
228 /* XXX: We assume bus 0. */
229 slot = ACPI_ADR_PCI_SLOT(addr);
230 func = ACPI_ADR_PCI_FUNC(addr);
232 device_printf(dev, "reading config registers from 0:%d:%d\n",
234 if (host_pcib_get_busno(pci_cfgregread, 0, slot, func, &busno) == 0)
235 device_printf(dev, "couldn't read bus number from cfg space\n");
244 * If nothing else worked, hope that ACPI at least lays out the
245 * host-PCI bridges in order and that as a result our unit number
246 * is actually our bus number. There are several reasons this
250 sc->ap_bus = device_get_unit(dev);
251 device_printf(dev, "trying bus number %d\n", sc->ap_bus);
254 /* If this is bus 0 on segment 0, note that it has been seen already. */
255 if (sc->ap_segment == 0 && sc->ap_bus == 0)
258 return (acpi_pcib_attach(dev, &sc->ap_prt, sc->ap_bus));
262 * Support for standard PCI bridge ivars.
265 acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
267 struct acpi_hpcib_softc *sc = device_get_softc(dev);
270 case PCIB_IVAR_DOMAIN:
274 *result = sc->ap_bus;
276 case ACPI_IVAR_HANDLE:
277 *result = (uintptr_t)sc->ap_handle;
279 case ACPI_IVAR_FLAGS:
280 *result = (uintptr_t)sc->ap_flags;
287 acpi_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
289 struct acpi_hpcib_softc *sc = device_get_softc(dev);
292 case PCIB_IVAR_DOMAIN:
297 case ACPI_IVAR_HANDLE:
298 sc->ap_handle = (ACPI_HANDLE)value;
300 case ACPI_IVAR_FLAGS:
301 sc->ap_flags = (int)value;
308 acpi_pcib_read_config(device_t dev, u_int bus, u_int slot, u_int func,
309 u_int reg, int bytes)
311 return (pci_cfgregread(bus, slot, func, reg, bytes));
315 acpi_pcib_write_config(device_t dev, u_int bus, u_int slot, u_int func,
316 u_int reg, uint32_t data, int bytes)
318 pci_cfgregwrite(bus, slot, func, reg, data, bytes);
322 acpi_pcib_acpi_route_interrupt(device_t pcib, device_t dev, int pin)
324 struct acpi_hpcib_softc *sc = device_get_softc(pcib);
326 return (acpi_pcib_route_interrupt(pcib, dev, pin, &sc->ap_prt));
330 acpi_pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount,
335 bus = device_get_parent(pcib);
336 return (PCIB_ALLOC_MSI(device_get_parent(bus), dev, count, maxcount,
341 acpi_pcib_alloc_msix(device_t pcib, device_t dev, int *irq)
345 bus = device_get_parent(pcib);
346 return (PCIB_ALLOC_MSIX(device_get_parent(bus), dev, irq));
350 acpi_pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr,
355 bus = device_get_parent(pcib);
356 return (PCIB_MAP_MSI(device_get_parent(bus), dev, irq, addr, data));
359 static u_long acpi_host_mem_start = 0x80000000;
360 TUNABLE_ULONG("hw.acpi.host_mem_start", &acpi_host_mem_start);
363 acpi_pcib_acpi_alloc_resource(device_t dev, device_t child, int type, int *rid,
364 u_long start, u_long end, u_long count, u_int flags)
367 * If no memory preference is given, use upper 32MB slot most
368 * bioses use for their memory window. Typically other bridges
369 * before us get in the way to assert their preferences on memory.
370 * Hardcoding like this sucks, so a more MD/MI way needs to be
371 * found to do it. This is typically only used on older laptops
372 * that don't have pci busses behind pci bridge, so assuming > 32MB
375 * PCI-PCI bridges may allocate smaller ranges for their windows,
376 * but the heuristics here should apply to those, so we allow
377 * several different end addresses.
379 if (type == SYS_RES_MEMORY && start == 0UL && (end == ~0UL ||
381 start = acpi_host_mem_start;
382 if (type == SYS_RES_IOPORT && start == 0UL && (end == ~0UL ||
383 end == 0xffff || end == 0xffffffff))
385 return (bus_generic_alloc_resource(dev, child, type, rid, start, end,