2 * Product specific probe and attach routines for:
6 * Copyright (c) 1999-2003 M. Warner Losh
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions, and the following disclaimer,
14 * without modification, immediately at the beginning of the file.
15 * 2. The name of the author may not be used to endorse or promote products
16 * derived from this software without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * Derived from bt isa from end, written by:
32 * Copyright (c) 1998 Justin T. Gibbs
33 * All rights reserved.
35 * Redistribution and use in source and binary forms, with or without
36 * modification, are permitted provided that the following conditions
38 * 1. Redistributions of source code must retain the above copyright
39 * notice, this list of conditions, and the following disclaimer,
40 * without modification, immediately at the beginning of the file.
41 * 2. The name of the author may not be used to endorse or promote products
42 * derived from this software without specific prior written permission.
44 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
45 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
46 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
47 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
48 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
49 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
50 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
51 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
52 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
53 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
57 #include <sys/cdefs.h>
58 __FBSDID("$FreeBSD$");
60 #include <sys/param.h>
61 #include <sys/systm.h>
62 #include <sys/kernel.h>
64 #include <sys/mutex.h>
66 #include <machine/bus.h>
67 #include <machine/resource.h>
68 #include <sys/module.h>
72 #include <isa/isavar.h>
74 #include <dev/aha/ahareg.h>
76 #include <cam/scsi/scsi_all.h>
78 static struct isa_pnp_id aha_ids[] = {
79 {ADP0100_PNP, "Adaptec 1540/1542 ISA SCSI"}, /* ADP0100 */
80 {AHA1540_PNP, "Adaptec 1540/aha-1640/aha-1535"},/* ADP1540 */
81 {AHA1542_PNP, "Adaptec 1542/aha-1535"}, /* ADP1542 */
82 {AHA1542_PNPCOMPAT, "Adaptec 1542 compatible"}, /* PNP00A0 */
83 {ICU0091_PNP, "Adaptec AHA-1540/1542 SCSI"}, /* ICU0091 */
88 * I/O ports listed in the order enumerated by the card for certain op codes.
90 static bus_addr_t aha_board_ports[] =
101 * Check if the device can be found at the port given
104 aha_isa_probe(device_t dev)
107 * find unit and check we have that many defined
109 struct aha_softc *aha = device_get_softc(dev);
112 struct resource *port_res;
116 config_data_t config_data;
119 /* Check isapnp ids */
120 if (ISA_PNP_PROBE(device_get_parent(dev), dev, aha_ids) == ENXIO)
124 port_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &port_rid,
125 0, ~0, AHA_NREGS, RF_ACTIVE);
127 if (port_res == NULL)
130 port_start = rman_get_start(port_res);
131 aha_alloc(aha, device_get_unit(dev), rman_get_bustag(port_res),
132 rman_get_bushandle(port_res));
134 /* See if there is really a card present */
135 if (aha_probe(aha) || aha_fetch_adapter_info(aha)) {
137 bus_release_resource(dev, SYS_RES_IOPORT, port_rid, port_res);
142 * Determine our IRQ, and DMA settings and
143 * export them to the configuration system.
145 error = aha_cmd(aha, AOP_INQUIRE_CONFIG, NULL, /*parmlen*/0,
146 (uint8_t*)&config_data, sizeof(config_data), DEFAULT_CMD_TIMEOUT);
149 device_printf(dev, "Could not determine IRQ or DMA "
150 "settings for adapter at %#jx. Failing probe\n",
151 (uintmax_t)port_start);
153 bus_release_resource(dev, SYS_RES_IOPORT, port_rid,
158 bus_release_resource(dev, SYS_RES_IOPORT, port_rid, port_res);
160 switch (config_data.dma_chan) {
171 device_printf(dev, "Invalid DMA setting for adapter at %#jx.",
172 (uintmax_t)port_start);
175 error = bus_set_resource(dev, SYS_RES_DRQ, 0, drq, 1);
179 irq = ffs(config_data.irq) + 8;
180 error = bus_set_resource(dev, SYS_RES_IRQ, 0, irq, 1);
185 * Attach all the sub-devices we can find
188 aha_isa_attach(device_t dev)
190 struct aha_softc *aha = device_get_softc(dev);
191 bus_dma_filter_t *filter;
196 int aha_free_needed = 0;
200 aha->port = bus_alloc_resource(dev, SYS_RES_IOPORT, &aha->portrid,
201 0, ~0, AHA_NREGS, RF_ACTIVE);
203 device_printf(dev, "Unable to allocate I/O ports\n");
208 aha->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &aha->irqrid,
211 device_printf(dev, "Unable to allocate excluse use of irq\n");
216 aha->drq = bus_alloc_resource_any(dev, SYS_RES_DRQ, &aha->drqrid,
219 device_printf(dev, "Unable to allocate drq\n");
223 #if 0 /* is the drq ever unset? */
224 if (dev->id_drq != -1)
225 isa_dmacascade(dev->id_drq);
227 isa_dmacascade(rman_get_start(aha->drq));
229 /* Allocate our parent dmatag */
232 lowaddr = BUS_SPACE_MAXADDR_24BIT;
234 if (bus_dma_tag_create( /* parent */ bus_get_dma_tag(dev),
237 /* lowaddr */ lowaddr,
238 /* highaddr */ BUS_SPACE_MAXADDR,
240 /* filterarg */ filter_arg,
241 /* maxsize */ BUS_SPACE_MAXSIZE_24BIT,
243 /* maxsegsz */ BUS_SPACE_MAXSIZE_24BIT,
245 /* lockfunc */ busdma_lock_mutex,
246 /* lockarg */ &Giant,
247 &aha->parent_dmat) != 0) {
248 device_printf(dev, "dma tag create failed.\n");
253 device_printf(dev, "init failed\n");
257 * The 1542A and B look the same. So we guess based on
258 * the firmware revision. It appears that only rev 0 is on
261 if (aha->boardid <= BOARD_1542 && aha->fw_major == 0) {
262 device_printf(dev, "154xA may not work\n");
263 aha->ccb_sg_opcode = INITIATOR_SG_CCB;
264 aha->ccb_ccb_opcode = INITIATOR_CCB;
268 error = aha_attach(aha);
270 device_printf(dev, "attach failed\n");
274 error = bus_setup_intr(dev, aha->irq, INTR_TYPE_CAM|INTR_ENTROPY,
275 NULL, aha_intr, aha, &ih);
277 device_printf(dev, "Unable to register interrupt handler\n");
283 bus_free_resource(dev, SYS_RES_IOPORT, aha->port);
284 bus_free_resource(dev, SYS_RES_IRQ, aha->irq);
285 bus_free_resource(dev, SYS_RES_DRQ, aha->drq);
292 aha_isa_detach(device_t dev)
294 struct aha_softc *aha = (struct aha_softc *)device_get_softc(dev);
297 error = bus_teardown_intr(dev, aha->irq, aha->ih);
299 device_printf(dev, "failed to unregister interrupt handler\n");
301 bus_free_resource(dev, SYS_RES_IOPORT, aha->port);
302 bus_free_resource(dev, SYS_RES_IRQ, aha->irq);
303 bus_free_resource(dev, SYS_RES_DRQ, aha->drq);
305 error = aha_detach(aha);
307 device_printf(dev, "detach failed\n");
316 aha_isa_identify(driver_t *driver, device_t parent)
320 struct aha_softc aha;
322 struct resource *res;
325 /* Attempt to find an adapter */
326 for (i = 0; i < sizeof(aha_board_ports) / sizeof(aha_board_ports[0]);
328 bzero(&aha, sizeof(aha));
329 ioport = aha_board_ports[i];
331 * XXX Check to see if we have a hard-wired aha device at
332 * XXX this port, if so, skip. This should also cover the
333 * XXX case where we are run multiple times due to, eg,
334 * XXX kldload/kldunload.
337 res = bus_alloc_resource(parent, SYS_RES_IOPORT, &rid,
338 ioport, ioport, AHA_NREGS, RF_ACTIVE);
341 aha_alloc(&aha, -1, rman_get_bustag(res),
342 rman_get_bushandle(res));
343 /* See if there is really a card present */
344 if (aha_probe(&aha) || aha_fetch_adapter_info(&aha))
346 child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "aha", -1);
347 bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, AHA_NREGS);
349 * Could query the board and set IRQ/DRQ, but probe does
353 bus_release_resource(parent, SYS_RES_IOPORT, rid, res);
358 static device_method_t aha_isa_methods[] = {
359 /* Device interface */
360 DEVMETHOD(device_probe, aha_isa_probe),
361 DEVMETHOD(device_attach, aha_isa_attach),
362 DEVMETHOD(device_detach, aha_isa_detach),
363 DEVMETHOD(device_identify, aha_isa_identify),
368 static driver_t aha_isa_driver = {
371 sizeof(struct aha_softc),
374 static devclass_t aha_devclass;
376 DRIVER_MODULE(aha, isa, aha_isa_driver, aha_devclass, 0, 0);
377 MODULE_DEPEND(aha, isa, 1, 1, 1);