2 * Copyright (c) 2001-2007 Thomas Quinot <thomas@cuivre.fr.eu.org>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
32 #include <sys/param.h>
33 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/malloc.h>
38 #include <sys/taskqueue.h>
40 #include <sys/mutex.h>
43 #include <machine/resource.h>
44 #include <machine/bus.h>
47 #include <cam/cam_ccb.h>
48 #include <cam/cam_periph.h>
49 #include <cam/cam_sim.h>
50 #include <cam/cam_xpt_sim.h>
51 #include <cam/cam_debug.h>
52 #include <cam/scsi/scsi_all.h>
54 #include <dev/ata/ata-all.h>
57 /* private data associated with an ATA bus */
58 struct atapi_xpt_softc {
59 struct ata_device atapi_cam_dev; /* must be first */
62 struct ata_channel *ata_ch;
63 struct cam_path *path;
66 #define BUS_REGISTERED 0x01
67 #define RESOURCE_SHORTAGE 0x02
68 #define DETACHING 0x04
70 TAILQ_HEAD(,atapi_hcb) pending_hcbs;
71 struct ata_device *atadev[2];
72 struct mtx state_lock;
75 /* hardware command descriptor block */
77 struct atapi_xpt_softc *softc;
85 #define AUTOSENSE 0x0002
87 TAILQ_ENTRY(atapi_hcb) chain;
90 enum reinit_reason { BOOT_ATTACH, ATTACH, RESET };
93 static void atapi_cam_identify(driver_t *dev, device_t parent);
94 static int atapi_cam_probe(device_t dev);
95 static int atapi_cam_attach(device_t dev);
96 static int atapi_cam_detach(device_t dev);
97 static int atapi_cam_reinit(device_t dev);
100 static void atapi_action(struct cam_sim *, union ccb *);
101 static void atapi_poll(struct cam_sim *);
102 static void atapi_async(void *, u_int32_t, struct cam_path *, void *);
103 static void atapi_cb(struct ata_request *);
106 static int atapi_cam_event_handler(module_t mod, int what, void *arg);
108 /* internal functions */
109 static void reinit_bus(struct atapi_xpt_softc *scp, enum reinit_reason reason);
110 static void setup_async_cb(struct atapi_xpt_softc *, uint32_t);
111 static void cam_rescan(struct cam_sim *);
112 static void free_hcb_and_ccb_done(struct atapi_hcb *, u_int32_t);
113 static struct atapi_hcb *allocate_hcb(struct atapi_xpt_softc *, int, int, union ccb *);
114 static void free_hcb(struct atapi_hcb *hcb);
115 static void free_softc(struct atapi_xpt_softc *scp);
117 static MALLOC_DEFINE(M_ATACAM, "ata_cam", "ATA driver CAM-XPT layer");
119 static device_method_t atapi_cam_methods[] = {
120 DEVMETHOD(device_identify, atapi_cam_identify),
121 DEVMETHOD(device_probe, atapi_cam_probe),
122 DEVMETHOD(device_attach, atapi_cam_attach),
123 DEVMETHOD(device_detach, atapi_cam_detach),
124 DEVMETHOD(ata_reinit, atapi_cam_reinit),
128 static driver_t atapi_cam_driver = {
131 sizeof(struct atapi_xpt_softc)
134 static devclass_t atapi_cam_devclass;
135 DRIVER_MODULE(atapicam, ata,
138 atapi_cam_event_handler,
140 MODULE_VERSION(atapicam, 1);
141 MODULE_DEPEND(atapicam, ata, 1, 1, 1);
142 MODULE_DEPEND(atapicam, cam, 1, 1, 1);
145 atapi_cam_identify(driver_t *driver, device_t parent)
147 struct atapi_xpt_softc *scp =
148 malloc (sizeof (struct atapi_xpt_softc), M_ATACAM, M_NOWAIT|M_ZERO);
152 printf ("atapi_cam_identify: out of memory");
156 /* Assume one atapicam instance per parent channel instance. */
157 child = device_add_child(parent, "atapicam", -1);
159 printf ("atapi_cam_identify: out of memory, can't add child");
160 free (scp, M_ATACAM);
163 scp->atapi_cam_dev.unit = -1;
164 scp->atapi_cam_dev.dev = child;
166 device_set_softc(child, scp);
170 atapi_cam_probe(device_t dev)
172 struct ata_device *atadev = device_get_softc (dev);
174 KASSERT(atadev != NULL, ("expect valid struct ata_device"));
175 if (atadev->unit < 0) {
176 device_set_desc(dev, "ATAPI CAM Attachment");
184 atapi_cam_attach(device_t dev)
186 struct atapi_xpt_softc *scp = NULL;
187 struct cam_devq *devq = NULL;
188 struct cam_sim *sim = NULL;
189 struct cam_path *path = NULL;
192 scp = (struct atapi_xpt_softc *)device_get_softc(dev);
194 device_printf(dev, "Cannot get softc\n");
198 mtx_init(&scp->state_lock, "ATAPICAM lock", NULL, MTX_DEF);
201 scp->parent = device_get_parent(dev);
202 scp->ata_ch = device_get_softc(scp->parent);
203 TAILQ_INIT(&scp->pending_hcbs);
204 unit = device_get_unit(device_get_parent(dev));
206 if ((devq = cam_simq_alloc(16)) == NULL) {
211 if ((sim = cam_sim_alloc(atapi_action, atapi_poll, "ata",
212 (void *)scp, unit, &scp->state_lock, 1, 1, devq)) == NULL) {
218 mtx_lock(&scp->state_lock);
219 if (xpt_bus_register(sim, dev, 0) != CAM_SUCCESS) {
221 mtx_unlock(&scp->state_lock);
224 scp->flags |= BUS_REGISTERED;
226 if (xpt_create_path(&path, /*periph*/ NULL,
227 cam_sim_path(sim), CAM_TARGET_WILDCARD,
228 CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
230 mtx_unlock(&scp->state_lock);
235 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("Registered SIM for ata%d\n", unit));
237 setup_async_cb(scp, AC_LOST_DEVICE);
238 reinit_bus(scp, cold ? BOOT_ATTACH : ATTACH);
240 mtx_unlock(&scp->state_lock);
250 atapi_cam_detach(device_t dev)
252 struct atapi_xpt_softc *scp = device_get_softc(dev);
254 mtx_lock(&scp->state_lock);
255 if (xpt_sim_opened(scp->sim)) {
256 mtx_unlock(&scp->state_lock);
259 xpt_freeze_simq(scp->sim, 1 /*count*/);
260 scp->flags |= DETACHING;
261 mtx_unlock(&scp->state_lock);
267 atapi_cam_reinit(device_t dev) {
268 struct atapi_xpt_softc *scp = device_get_softc(dev);
271 * scp might be null if the bus is being reinitialised during
272 * the boot-up sequence, before the ATAPI bus is registered.
276 mtx_lock(&scp->state_lock);
277 reinit_bus(scp, RESET);
278 mtx_unlock(&scp->state_lock);
284 reinit_bus(struct atapi_xpt_softc *scp, enum reinit_reason reason) {
285 struct ata_device *old_atadev[2], *atadev;
287 int nchildren, i, dev_changed;
289 if (device_get_children(scp->parent, &children, &nchildren) != 0) {
293 old_atadev[0] = scp->atadev[0];
294 old_atadev[1] = scp->atadev[1];
295 scp->atadev[0] = NULL;
296 scp->atadev[1] = NULL;
298 for (i = 0; i < nchildren; i++) {
299 /* XXX Does the child need to actually be attached yet? */
300 if (children[i] != NULL) {
301 atadev = device_get_softc(children[i]);
302 if ((atadev->unit == ATA_MASTER) &&
303 (scp->ata_ch->devices & ATA_ATAPI_MASTER) != 0)
304 scp->atadev[0] = atadev;
305 if ((atadev->unit == ATA_SLAVE) &&
306 (scp->ata_ch->devices & ATA_ATAPI_SLAVE) != 0)
307 scp->atadev[1] = atadev;
310 dev_changed = (old_atadev[0] != scp->atadev[0])
311 || (old_atadev[1] != scp->atadev[1]);
312 free(children, M_TEMP);
319 xpt_async(AC_BUS_RESET, scp->path, NULL);
324 cam_rescan(scp->sim);
330 setup_async_cb(struct atapi_xpt_softc *scp, uint32_t events)
332 struct ccb_setasync csa;
334 xpt_setup_ccb(&csa.ccb_h, scp->path, /*priority*/ 5);
335 csa.ccb_h.func_code = XPT_SASYNC_CB;
336 csa.event_enable = events;
337 csa.callback = &atapi_async;
338 csa.callback_arg = scp->sim;
339 xpt_action((union ccb *) &csa);
343 atapi_action(struct cam_sim *sim, union ccb *ccb)
345 struct atapi_xpt_softc *softc = (struct atapi_xpt_softc*)cam_sim_softc(sim);
346 struct ccb_hdr *ccb_h = &ccb->ccb_h;
347 struct atapi_hcb *hcb = NULL;
348 struct ata_request *request = NULL;
349 int unit = cam_sim_unit(sim);
350 int bus = cam_sim_bus(sim);
354 switch (ccb_h->func_code) {
356 struct ccb_pathinq *cpi = &ccb->cpi;
357 int tid = ccb_h->target_id;
359 cpi->version_num = 1;
360 cpi->hba_inquiry = 0;
361 cpi->target_sprt = 0;
362 cpi->hba_misc = PIM_NO_6_BYTE;
363 cpi->hba_eng_cnt = 0;
364 bzero(cpi->vuhba_flags, sizeof(cpi->vuhba_flags));
367 cpi->async_flags = 0;
369 cpi->initiator_id = 7;
370 strncpy(cpi->sim_vid, "FreeBSD", sizeof(cpi->sim_vid));
371 strncpy(cpi->hba_vid, "ATAPI", sizeof(cpi->hba_vid));
372 strncpy(cpi->dev_name, cam_sim_name(sim), sizeof cpi->dev_name);
373 cpi->unit_number = cam_sim_unit(sim);
374 cpi->bus_id = cam_sim_bus(sim);
375 cpi->base_transfer_speed = 3300;
376 cpi->transport = XPORT_SPI;
377 cpi->transport_version = 2;
378 cpi->protocol = PROTO_SCSI;
379 cpi->protocol_version = SCSI_REV_2;
381 if (softc->ata_ch && tid != CAM_TARGET_WILDCARD) {
382 if (softc->atadev[tid] == NULL) {
383 ccb->ccb_h.status = CAM_DEV_NOT_THERE;
387 switch (softc->atadev[ccb_h->target_id]->mode) {
389 cpi->base_transfer_speed = 5200;
392 cpi->base_transfer_speed = 7000;
395 cpi->base_transfer_speed = 11000;
400 cpi->base_transfer_speed = 16000;
403 cpi->base_transfer_speed = 33000;
406 cpi->base_transfer_speed = 66000;
409 cpi->base_transfer_speed = 100000;
412 cpi->base_transfer_speed = 133000;
415 cpi->base_transfer_speed = 150000;
418 cpi->base_transfer_speed = 300000;
424 cpi->maxio = softc->ata_ch->dma.max_iosize ?
425 softc->ata_ch->dma.max_iosize : DFLTPHYS;
426 ccb->ccb_h.status = CAM_REQ_CMP;
431 case XPT_RESET_DEV: {
432 int tid = ccb_h->target_id;
434 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE, ("dev reset\n"));
435 mtx_unlock(&softc->state_lock);
436 ata_controlcmd(softc->atadev[tid]->dev, ATA_DEVICE_RESET, 0, 0, 0);
437 mtx_lock(&softc->state_lock);
438 ccb->ccb_h.status = CAM_REQ_CMP;
444 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE, ("bus reset\n"));
445 mtx_unlock(&softc->state_lock);
446 ata_reinit(softc->parent);
447 mtx_lock(&softc->state_lock);
448 ccb->ccb_h.status = CAM_REQ_CMP;
452 case XPT_SET_TRAN_SETTINGS:
453 /* ignore these, we're not doing SCSI here */
454 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE,
455 ("SET_TRAN_SETTINGS not supported\n"));
456 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
460 case XPT_GET_TRAN_SETTINGS: {
461 struct ccb_trans_settings *cts = &ccb->cts;
462 cts->protocol = PROTO_SCSI;
463 cts->protocol_version = SCSI_REV_2;
464 cts->transport = XPORT_SPI;
465 cts->transport_version = XPORT_VERSION_UNSPECIFIED;
466 cts->proto_specific.valid = 0;
467 cts->xport_specific.valid = 0;
468 /* nothing more to do */
469 ccb->ccb_h.status = CAM_REQ_CMP;
470 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE, ("GET_TRAN_SETTINGS\n"));
475 case XPT_CALC_GEOMETRY: {
476 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE, ("CALC_GEOMETRY\n"));
477 cam_calc_geometry(&ccb->ccg, /*extended*/1);
483 struct ccb_scsiio *csio = &ccb->csio;
484 int tid = ccb_h->target_id, lid = ccb_h->target_lun;
485 int request_flags = ATA_R_ATAPI;
487 CAM_DEBUG(ccb_h->path, CAM_DEBUG_SUBTRACE, ("XPT_SCSI_IO\n"));
489 if (softc->flags & DETACHING) {
490 ccb->ccb_h.status = CAM_REQ_ABORTED;
495 if (softc->atadev[tid] == NULL) {
496 ccb->ccb_h.status = CAM_DEV_NOT_THERE;
501 /* check that this request was not aborted already */
502 if ((ccb_h->status & CAM_STATUS_MASK) != CAM_REQ_INPROG) {
503 printf("XPT_SCSI_IO received but already in progress?\n");
508 CAM_DEBUG(ccb_h->path, CAM_DEBUG_SUBTRACE,
509 ("SCSI IO received for invalid lun %d\n", lid));
512 if (csio->cdb_len > sizeof request->u.atapi.ccb) {
513 CAM_DEBUG(ccb_h->path, CAM_DEBUG_SUBTRACE,
514 ("CAM CCB too long for ATAPI"));
517 if ((ccb_h->flags & CAM_SCATTER_VALID)) {
518 /* scatter-gather not supported */
519 xpt_print_path(ccb_h->path);
520 printf("ATAPI/CAM does not support scatter-gather yet!\n");
524 switch (ccb_h->flags & CAM_DIR_MASK) {
526 request_flags |= ATA_R_READ;
529 request_flags |= ATA_R_WRITE;
532 /* No flags need to be set */
535 device_printf(softc->dev, "unknown IO operation\n");
539 if ((hcb = allocate_hcb(softc, unit, bus, ccb)) == NULL) {
540 printf("cannot allocate ATAPI/CAM hcb\n");
543 if ((request = ata_alloc_request()) == NULL) {
544 printf("cannot allocate ATAPI/CAM request\n");
548 bcopy((ccb_h->flags & CAM_CDB_POINTER) ?
549 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes,
550 request->u.atapi.ccb, csio->cdb_len);
552 if (CAM_DEBUGGED(ccb_h->path, CAM_DEBUG_CDB)) {
553 char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
555 printf("atapi_action: hcb@%p: %s\n", hcb,
556 scsi_cdb_string(request->u.atapi.ccb, cdb_str, sizeof(cdb_str)));
558 if (CAM_DEBUGGED(ccb_h->path, CAM_DEBUG_SUBTRACE)) {
559 request_flags |= ATA_R_DEBUG;
563 len = csio->dxfer_len;
564 buf = csio->data_ptr;
566 /* some SCSI commands require special processing */
567 switch (request->u.atapi.ccb[0]) {
570 * many ATAPI devices seem to report more than
571 * SHORT_INQUIRY_LENGTH bytes of available INQUIRY
572 * information, but respond with some incorrect condition
573 * when actually asked for it, so we are going to pretend
574 * that only SHORT_INQUIRY_LENGTH are expected, anyway.
576 struct scsi_inquiry *inq = (struct scsi_inquiry *) &request->u.atapi.ccb[0];
578 if (inq->byte2 == 0 && inq->page_code == 0 &&
579 inq->length > SHORT_INQUIRY_LENGTH) {
581 len = inq->length = SHORT_INQUIRY_LENGTH;
589 CAM_DEBUG(ccb_h->path, CAM_DEBUG_SUBTRACE,
590 ("Translating %s into _10 equivalent\n",
591 (request->u.atapi.ccb[0] == READ_6) ? "READ_6" : "WRITE_6"));
592 request->u.atapi.ccb[0] |= 0x20;
593 request->u.atapi.ccb[9] = request->u.atapi.ccb[5];
594 request->u.atapi.ccb[8] = request->u.atapi.ccb[4];
595 request->u.atapi.ccb[7] = 0;
596 request->u.atapi.ccb[6] = 0;
597 request->u.atapi.ccb[5] = request->u.atapi.ccb[3];
598 request->u.atapi.ccb[4] = request->u.atapi.ccb[2];
599 request->u.atapi.ccb[3] = request->u.atapi.ccb[1] & 0x1f;
600 request->u.atapi.ccb[2] = 0;
601 request->u.atapi.ccb[1] = 0;
612 * Enable DMA (if target supports it) for READ and WRITE commands
613 * only, as some combinations of drive, controller and chipset do
614 * not behave correctly when DMA is enabled for other commands.
616 if (softc->atadev[tid]->mode >= ATA_DMA)
617 request_flags |= ATA_R_DMA;
622 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN && (len & 1)) {
623 /* ATA always transfers an even number of bytes */
624 if ((buf = hcb->dxfer_alloc
625 = malloc(++len, M_ATACAM, M_NOWAIT | M_ZERO)) == NULL) {
626 printf("cannot allocate ATAPI/CAM buffer\n");
630 request->dev = softc->atadev[tid]->dev;
631 request->driver = hcb;
633 request->bytecount = len;
634 request->transfersize = min(request->bytecount, 65534);
635 request->timeout = (ccb_h->timeout + 999) / 1000;
636 request->callback = &atapi_cb;
637 request->flags = request_flags;
640 * no retries are to be performed at the ATA level; any retries
641 * will be done by CAM.
643 request->retries = 0;
645 TAILQ_INSERT_TAIL(&softc->pending_hcbs, hcb, chain);
646 hcb->flags |= QUEUED;
647 ccb_h->status |= CAM_SIM_QUEUED;
648 mtx_unlock(&softc->state_lock);
650 ata_queue_request(request);
651 mtx_lock(&softc->state_lock);
656 CAM_DEBUG(ccb_h->path, CAM_DEBUG_SUBTRACE,
657 ("unsupported function code 0x%02x\n", ccb_h->func_code));
665 ata_free_request(request);
668 xpt_print_path(ccb_h->path);
669 printf("out of memory, freezing queue.\n");
670 softc->flags |= RESOURCE_SHORTAGE;
671 xpt_freeze_simq(sim, /*count*/ 1);
672 ccb_h->status = CAM_REQUEUE_REQ;
677 ccb_h->status = CAM_REQ_INVALID;
683 atapi_poll(struct cam_sim *sim)
685 struct atapi_xpt_softc *softc =
686 (struct atapi_xpt_softc*)cam_sim_softc(sim);
688 mtx_unlock(&softc->state_lock);
689 ata_interrupt(softc->ata_ch);
690 mtx_lock(&softc->state_lock);
694 atapi_cb(struct ata_request *request)
696 struct atapi_xpt_softc *scp;
697 struct atapi_hcb *hcb;
698 struct ccb_scsiio *csio;
701 hcb = (struct atapi_hcb *)request->driver;
703 csio = &hcb->ccb->csio;
706 # define err (request->u.atapi.sense.key)
707 if (CAM_DEBUGGED(csio->ccb_h.path, CAM_DEBUG_CDB)) {
708 printf("atapi_cb: hcb@%p sense = %02x: sk = %01x%s%s%s\n",
709 hcb, err, err & 0x0f,
710 (err & 0x80) ? ", Filemark" : "",
711 (err & 0x40) ? ", EOM" : "",
712 (err & 0x20) ? ", ILI" : "");
713 device_printf(request->dev,
714 "cmd %s status %02x result %02x error %02x\n",
715 ata_cmd2str(request),
716 request->status, request->result, request->error);
720 if ((hcb->flags & AUTOSENSE) != 0) {
721 rc = CAM_SCSI_STATUS_ERROR;
722 if (request->result == 0) {
723 csio->ccb_h.status |= CAM_AUTOSNS_VALID;
725 } else if (request->result != 0) {
726 if ((request->flags & ATA_R_TIMEOUT) != 0) {
727 rc = CAM_CMD_TIMEOUT;
729 rc = CAM_SCSI_STATUS_ERROR;
730 csio->scsi_status = SCSI_STATUS_CHECK_COND;
732 if ((csio->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0) {
734 static const int8_t ccb[16] = { ATAPI_REQUEST_SENSE, 0, 0, 0,
735 sizeof(struct atapi_sense), 0, 0, 0, 0, 0, 0,
738 bcopy (ccb, request->u.atapi.ccb, sizeof ccb);
739 request->data = (caddr_t)&csio->sense_data;
740 request->bytecount = sizeof(struct atapi_sense);
741 request->transfersize = min(request->bytecount, 65534);
742 request->timeout = (csio->ccb_h.timeout + 999) / 1000;
743 request->retries = 2;
744 request->flags = ATA_R_QUIET|ATA_R_ATAPI|ATA_R_IMMEDIATE;
745 hcb->flags |= AUTOSENSE;
747 ata_queue_request(request);
751 * Use auto-sense data from the ATA layer, if it has
752 * issued a REQUEST SENSE automatically and that operation
753 * returned without error.
755 if (request->u.atapi.sense.key != 0 && request->error == 0) {
756 bcopy (&request->u.atapi.sense, &csio->sense_data, sizeof(struct atapi_sense));
757 csio->ccb_h.status |= CAM_AUTOSNS_VALID;
764 csio->scsi_status = SCSI_STATUS_OK;
765 if (((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) &&
766 hcb->dxfer_alloc != NULL)
768 bcopy(hcb->dxfer_alloc, csio->data_ptr, csio->dxfer_len);
772 mtx_lock(&scp->state_lock);
773 free_hcb_and_ccb_done(hcb, rc);
774 mtx_unlock(&scp->state_lock);
776 ata_free_request(request);
780 free_hcb_and_ccb_done(struct atapi_hcb *hcb, u_int32_t status)
782 struct atapi_xpt_softc *softc;
791 /* we're about to free a hcb, so the shortage has ended */
792 if (softc->flags & RESOURCE_SHORTAGE) {
793 softc->flags &= ~RESOURCE_SHORTAGE;
794 status |= CAM_RELEASE_SIMQ;
798 status | (ccb->ccb_h.status & ~(CAM_STATUS_MASK | CAM_SIM_QUEUED));
803 atapi_async(void *callback_arg, u_int32_t code,
804 struct cam_path* path, void *arg)
812 targ = xpt_path_target_id(path);
813 xpt_print_path(path);
815 printf("Lost host adapter\n");
817 printf("Lost target %d???\n", targ);
826 cam_rescan(struct cam_sim *sim)
830 ccb = xpt_alloc_ccb_nowait();
833 if (xpt_create_path(&ccb->ccb_h.path, xpt_periph, cam_sim_path(sim),
834 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
838 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("Rescanning ATAPI bus.\n"));
840 /* scan is in progress now */
843 static struct atapi_hcb *
844 allocate_hcb(struct atapi_xpt_softc *softc, int unit, int bus, union ccb *ccb)
846 struct atapi_hcb *hcb = (struct atapi_hcb *)
847 malloc(sizeof(struct atapi_hcb), M_ATACAM, M_NOWAIT | M_ZERO);
859 free_hcb(struct atapi_hcb *hcb)
861 if ((hcb->flags & QUEUED) != 0)
862 TAILQ_REMOVE(&hcb->softc->pending_hcbs, hcb, chain);
863 if (hcb->dxfer_alloc != NULL)
864 free(hcb->dxfer_alloc, M_ATACAM);
869 free_softc(struct atapi_xpt_softc *scp)
871 struct atapi_hcb *hcb, *thcb;
874 mtx_lock(&scp->state_lock);
875 TAILQ_FOREACH_SAFE(hcb, &scp->pending_hcbs, chain, thcb) {
876 free_hcb_and_ccb_done(hcb, CAM_UNREC_HBA_ERROR);
878 if (scp->path != NULL) {
879 setup_async_cb(scp, 0);
880 xpt_free_path(scp->path);
882 if ((scp->flags & BUS_REGISTERED) != 0) {
883 if (xpt_bus_deregister(cam_sim_path(scp->sim)) == CAM_REQ_CMP)
884 scp->flags &= ~BUS_REGISTERED;
886 if (scp->sim != NULL) {
887 if ((scp->flags & BUS_REGISTERED) == 0)
888 cam_sim_free(scp->sim, /*free_devq*/TRUE);
890 printf("Can't free %s SIM (still registered)\n",
891 cam_sim_name(scp->sim));
893 mtx_destroy(&scp->state_lock);
898 atapi_cam_event_handler(module_t mod, int what, void *arg) {
904 if (devclass_get_devices(atapi_cam_devclass, &devlist, &devcount)
907 if (devlist != NULL) {
908 while (devlist != NULL && devcount > 0) {
909 device_t child = devlist[--devcount];
910 struct atapi_xpt_softc *scp = device_get_softc(child);
912 device_delete_child(device_get_parent(child),child);
916 free(devlist, M_TEMP);