2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3 * Copyright (c) 2002-2008 Atheros Communications, Inc.
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
23 #include "ah_internal.h"
25 #include "ar5416/ar5416.h"
26 #include "ar5416/ar5416reg.h"
27 #include "ar5416/ar5416phy.h"
28 #include "ar5416/ar5416desc.h"
31 * Stop transmit on the specified queue
34 ar5416StopTxDma(struct ath_hal *ah, u_int q)
36 #define STOP_DMA_TIMEOUT 4000 /* us */
37 #define STOP_DMA_ITER 100 /* us */
40 HALASSERT(q < AH_PRIVATE(ah)->ah_caps.halTotalQueues);
42 HALASSERT(AH5212(ah)->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE);
44 OS_REG_WRITE(ah, AR_Q_TXD, 1 << q);
45 for (i = STOP_DMA_TIMEOUT/STOP_DMA_ITER; i != 0; i--) {
46 if (ar5212NumTxPending(ah, q) == 0)
48 OS_DELAY(STOP_DMA_ITER);
52 HALDEBUG(ah, HAL_DEBUG_ANY,
53 "%s: queue %u DMA did not stop in 400 msec\n", __func__, q);
54 HALDEBUG(ah, HAL_DEBUG_ANY,
55 "%s: QSTS 0x%x Q_TXE 0x%x Q_TXD 0x%x Q_CBR 0x%x\n", __func__,
56 OS_REG_READ(ah, AR_QSTS(q)), OS_REG_READ(ah, AR_Q_TXE),
57 OS_REG_READ(ah, AR_Q_TXD), OS_REG_READ(ah, AR_QCBRCFG(q)));
58 HALDEBUG(ah, HAL_DEBUG_ANY,
59 "%s: Q_MISC 0x%x Q_RDYTIMECFG 0x%x Q_RDYTIMESHDN 0x%x\n",
60 __func__, OS_REG_READ(ah, AR_QMISC(q)),
61 OS_REG_READ(ah, AR_QRDYTIMECFG(q)),
62 OS_REG_READ(ah, AR_Q_RDYTIMESHDN));
66 /* ar5416 and up can kill packets at the PCU level */
67 if (ar5212NumTxPending(ah, q)) {
70 HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
71 "%s: Num of pending TX Frames %d on Q %d\n",
72 __func__, ar5212NumTxPending(ah, q), q);
74 /* Kill last PCU Tx Frame */
75 /* TODO - save off and restore current values of Q1/Q2? */
76 for (j = 0; j < 2; j++) {
77 uint32_t tsfLow = OS_REG_READ(ah, AR_TSF_L32);
78 OS_REG_WRITE(ah, AR_QUIET2,
79 SM(10, AR_QUIET2_QUIET_DUR));
80 OS_REG_WRITE(ah, AR_QUIET_PERIOD, 100);
81 OS_REG_WRITE(ah, AR_NEXT_QUIET, tsfLow >> 10);
82 OS_REG_SET_BIT(ah, AR_TIMER_MODE, AR_TIMER_MODE_QUIET);
84 if ((OS_REG_READ(ah, AR_TSF_L32)>>10) == (tsfLow>>10))
87 HALDEBUG(ah, HAL_DEBUG_ANY,
88 "%s: TSF moved while trying to set quiet time "
89 "TSF: 0x%08x\n", __func__, tsfLow);
90 HALASSERT(j < 1); /* TSF shouldn't count twice or reg access is taking forever */
93 OS_REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_CHAN_IDLE);
95 /* Allow the quiet mechanism to do its work */
97 OS_REG_CLR_BIT(ah, AR_TIMER_MODE, AR_TIMER_MODE_QUIET);
99 /* Verify the transmit q is empty */
100 for (i = STOP_DMA_TIMEOUT/STOP_DMA_ITER; i != 0; i--) {
101 if (ar5212NumTxPending(ah, q) == 0)
103 OS_DELAY(STOP_DMA_ITER);
106 HALDEBUG(ah, HAL_DEBUG_ANY,
107 "%s: Failed to stop Tx DMA in %d msec after killing"
108 " last frame\n", __func__, STOP_DMA_TIMEOUT / 1000);
110 OS_REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_CHAN_IDLE);
113 OS_REG_WRITE(ah, AR_Q_TXD, 0);
116 #undef STOP_DMA_TIMEOUT
119 #define VALID_KEY_TYPES \
120 ((1 << HAL_KEY_TYPE_CLEAR) | (1 << HAL_KEY_TYPE_WEP)|\
121 (1 << HAL_KEY_TYPE_AES) | (1 << HAL_KEY_TYPE_TKIP))
122 #define isValidKeyType(_t) ((1 << (_t)) & VALID_KEY_TYPES)
124 #define set11nTries(_series, _index) \
125 (SM((_series)[_index].Tries, AR_XmitDataTries##_index))
127 #define set11nRate(_series, _index) \
128 (SM((_series)[_index].Rate, AR_XmitRate##_index))
130 #define set11nPktDurRTSCTS(_series, _index) \
131 (SM((_series)[_index].PktDuration, AR_PacketDur##_index) |\
132 ((_series)[_index].RateFlags & HAL_RATESERIES_RTS_CTS ?\
133 AR_RTSCTSQual##_index : 0))
135 #define set11nRateFlags(_series, _index) \
136 ((_series)[_index].RateFlags & HAL_RATESERIES_2040 ? AR_2040_##_index : 0) \
137 |((_series)[_index].RateFlags & HAL_RATESERIES_HALFGI ? AR_GI##_index : 0) \
138 |SM((_series)[_index].ChSel, AR_ChainSel##_index)
141 * Descriptor Access Functions
144 #define VALID_PKT_TYPES \
145 ((1<<HAL_PKT_TYPE_NORMAL)|(1<<HAL_PKT_TYPE_ATIM)|\
146 (1<<HAL_PKT_TYPE_PSPOLL)|(1<<HAL_PKT_TYPE_PROBE_RESP)|\
147 (1<<HAL_PKT_TYPE_BEACON)|(1<<HAL_PKT_TYPE_AMPDU))
148 #define isValidPktType(_t) ((1<<(_t)) & VALID_PKT_TYPES)
149 #define VALID_TX_RATES \
150 ((1<<0x0b)|(1<<0x0f)|(1<<0x0a)|(1<<0x0e)|(1<<0x09)|(1<<0x0d)|\
151 (1<<0x08)|(1<<0x0c)|(1<<0x1b)|(1<<0x1a)|(1<<0x1e)|(1<<0x19)|\
152 (1<<0x1d)|(1<<0x18)|(1<<0x1c)|(1<<0x01)|(1<<0x02)|(1<<0x03)|\
153 (1<<0x04)|(1<<0x05)|(1<<0x06)|(1<<0x07)|(1<<0x00))
154 /* NB: accept HT rates */
155 #define isValidTxRate(_r) ((1<<((_r) & 0x7f)) & VALID_TX_RATES)
158 ar5416SetupTxDesc(struct ath_hal *ah, struct ath_desc *ds,
163 u_int txRate0, u_int txTries0,
168 u_int rtsctsDuration,
173 #define RTSCTS (HAL_TXDESC_RTSENA|HAL_TXDESC_CTSENA)
174 struct ar5416_desc *ads = AR5416DESC(ds);
175 struct ath_hal_5416 *ahp = AH5416(ah);
179 HALASSERT(txTries0 != 0);
180 HALASSERT(isValidPktType(type));
181 HALASSERT(isValidTxRate(txRate0));
182 HALASSERT((flags & RTSCTS) != RTSCTS);
183 /* XXX validate antMode */
185 txPower = (txPower + AH5212(ah)->ah_txPowerIndexOffset);
189 ads->ds_ctl0 = (pktLen & AR_FrameLen)
190 | (txPower << AR_XmitPower_S)
191 | (flags & HAL_TXDESC_VEOL ? AR_VEOL : 0)
192 | (flags & HAL_TXDESC_CLRDMASK ? AR_ClrDestMask : 0)
193 | (flags & HAL_TXDESC_INTREQ ? AR_TxIntrReq : 0)
195 ads->ds_ctl1 = (type << AR_FrameType_S)
196 | (flags & HAL_TXDESC_NOACK ? AR_NoAck : 0)
198 ads->ds_ctl2 = SM(txTries0, AR_XmitDataTries0)
199 | (flags & HAL_TXDESC_DURENA ? AR_DurUpdateEn : 0)
201 ads->ds_ctl3 = (txRate0 << AR_XmitRate0_S)
206 ads->ds_ctl7 = SM(ahp->ah_tx_chainmask, AR_ChainSel0)
207 | SM(ahp->ah_tx_chainmask, AR_ChainSel1)
208 | SM(ahp->ah_tx_chainmask, AR_ChainSel2)
209 | SM(ahp->ah_tx_chainmask, AR_ChainSel3)
211 ads->ds_ctl8 = SM(0, AR_AntCtl0);
212 ads->ds_ctl9 = SM(0, AR_AntCtl1) | SM(txPower, AR_XmitPower1);
213 ads->ds_ctl10 = SM(0, AR_AntCtl2) | SM(txPower, AR_XmitPower2);
214 ads->ds_ctl11 = SM(0, AR_AntCtl3) | SM(txPower, AR_XmitPower3);
216 if (keyIx != HAL_TXKEYIX_INVALID) {
217 /* XXX validate key index */
218 ads->ds_ctl1 |= SM(keyIx, AR_DestIdx);
219 ads->ds_ctl0 |= AR_DestIdxValid;
220 ads->ds_ctl6 |= SM(ahp->ah_keytype[keyIx], AR_EncrType);
222 if (flags & RTSCTS) {
223 if (!isValidTxRate(rtsctsRate)) {
224 HALDEBUG(ah, HAL_DEBUG_ANY,
225 "%s: invalid rts/cts rate 0x%x\n",
226 __func__, rtsctsRate);
229 /* XXX validate rtsctsDuration */
230 ads->ds_ctl0 |= (flags & HAL_TXDESC_CTSENA ? AR_CTSEnable : 0)
231 | (flags & HAL_TXDESC_RTSENA ? AR_RTSEnable : 0)
233 ads->ds_ctl7 |= (rtsctsRate << AR_RTSCTSRate_S);
237 * Set the TX antenna to 0 for Kite
238 * To preserve existing behaviour, also set the TPC bits to 0;
239 * when TPC is enabled these should be filled in appropriately.
241 if (AR_SREV_KITE(ah)) {
242 ads->ds_ctl8 = SM(0, AR_AntCtl0);
243 ads->ds_ctl9 = SM(0, AR_AntCtl1) | SM(0, AR_XmitPower1);
244 ads->ds_ctl10 = SM(0, AR_AntCtl2) | SM(0, AR_XmitPower2);
245 ads->ds_ctl11 = SM(0, AR_AntCtl3) | SM(0, AR_XmitPower3);
252 ar5416SetupXTxDesc(struct ath_hal *ah, struct ath_desc *ds,
253 u_int txRate1, u_int txTries1,
254 u_int txRate2, u_int txTries2,
255 u_int txRate3, u_int txTries3)
257 struct ar5416_desc *ads = AR5416DESC(ds);
260 HALASSERT(isValidTxRate(txRate1));
261 ads->ds_ctl2 |= SM(txTries1, AR_XmitDataTries1);
262 ads->ds_ctl3 |= (txRate1 << AR_XmitRate1_S);
265 HALASSERT(isValidTxRate(txRate2));
266 ads->ds_ctl2 |= SM(txTries2, AR_XmitDataTries2);
267 ads->ds_ctl3 |= (txRate2 << AR_XmitRate2_S);
270 HALASSERT(isValidTxRate(txRate3));
271 ads->ds_ctl2 |= SM(txTries3, AR_XmitDataTries3);
272 ads->ds_ctl3 |= (txRate3 << AR_XmitRate3_S);
278 ar5416FillTxDesc(struct ath_hal *ah, struct ath_desc *ds,
279 u_int segLen, HAL_BOOL firstSeg, HAL_BOOL lastSeg,
280 const struct ath_desc *ds0)
282 struct ar5416_desc *ads = AR5416DESC(ds);
284 HALASSERT((segLen &~ AR_BufLen) == 0);
288 * First descriptor, don't clobber xmit control data
289 * setup by ar5212SetupTxDesc.
291 ads->ds_ctl1 |= segLen | (lastSeg ? 0 : AR_TxMore);
292 } else if (lastSeg) { /* !firstSeg && lastSeg */
294 * Last descriptor in a multi-descriptor frame,
295 * copy the multi-rate transmit parameters from
296 * the first frame for processing on completion.
299 ads->ds_ctl1 = segLen;
300 #ifdef AH_NEED_DESC_SWAP
301 ads->ds_ctl2 = __bswap32(AR5416DESC_CONST(ds0)->ds_ctl2);
302 ads->ds_ctl3 = __bswap32(AR5416DESC_CONST(ds0)->ds_ctl3);
304 ads->ds_ctl2 = AR5416DESC_CONST(ds0)->ds_ctl2;
305 ads->ds_ctl3 = AR5416DESC_CONST(ds0)->ds_ctl3;
307 } else { /* !firstSeg && !lastSeg */
309 * Intermediate descriptor in a multi-descriptor frame.
312 ads->ds_ctl1 = segLen | AR_TxMore;
316 /* XXX only on last descriptor? */
317 OS_MEMZERO(ads->u.tx.status, sizeof(ads->u.tx.status));
322 ar5416ChainTxDesc(struct ath_hal *ah, struct ath_desc *ds,
333 struct ar5416_desc *ads = AR5416DESC(ds);
334 uint32_t *ds_txstatus = AR5416_DS_TXSTATUS(ah,ads);
335 struct ath_hal_5416 *ahp = AH5416(ah);
342 HALASSERT((segLen &~ AR_BufLen) == 0);
344 HALASSERT(isValidPktType(type));
345 if (type == HAL_PKT_TYPE_AMPDU) {
346 type = HAL_PKT_TYPE_NORMAL;
351 OS_MEMZERO(ds->ds_hw, AR5416_DESC_TX_CTL_SZ);
354 ads->ds_ctl0 = (pktLen & AR_FrameLen);
355 ads->ds_ctl1 = (type << AR_FrameType_S)
356 | (isaggr ? (AR_IsAggr | AR_MoreAggr) : 0);
359 if (keyIx != HAL_TXKEYIX_INVALID) {
360 /* XXX validate key index */
361 ads->ds_ctl1 |= SM(keyIx, AR_DestIdx);
362 ads->ds_ctl0 |= AR_DestIdxValid;
365 ads->ds_ctl6 = SM(ahp->ah_keytype[cipher], AR_EncrType);
367 ads->ds_ctl6 |= SM(delims, AR_PadDelim);
371 ads->ds_ctl1 |= segLen | (lastSeg ? 0 : AR_TxMore);
372 } else if (lastSeg) { /* !firstSeg && lastSeg */
374 ads->ds_ctl1 |= segLen;
375 } else { /* !firstSeg && !lastSeg */
377 * Intermediate descriptor in a multi-descriptor frame.
380 ads->ds_ctl1 |= segLen | AR_TxMore;
382 ds_txstatus[0] = ds_txstatus[1] = 0;
383 ds_txstatus[9] &= ~AR_TxDone;
389 ar5416SetupFirstTxDesc(struct ath_hal *ah, struct ath_desc *ds,
390 u_int aggrLen, u_int flags, u_int txPower,
391 u_int txRate0, u_int txTries0, u_int antMode,
392 u_int rtsctsRate, u_int rtsctsDuration)
394 #define RTSCTS (HAL_TXDESC_RTSENA|HAL_TXDESC_CTSENA)
395 struct ar5416_desc *ads = AR5416DESC(ds);
396 struct ath_hal_5212 *ahp = AH5212(ah);
398 HALASSERT(txTries0 != 0);
399 HALASSERT(isValidTxRate(txRate0));
400 HALASSERT((flags & RTSCTS) != RTSCTS);
401 /* XXX validate antMode */
403 txPower = (txPower + ahp->ah_txPowerIndexOffset );
404 if(txPower > 63) txPower=63;
406 ads->ds_ctl0 |= (txPower << AR_XmitPower_S)
407 | (flags & HAL_TXDESC_VEOL ? AR_VEOL : 0)
408 | (flags & HAL_TXDESC_CLRDMASK ? AR_ClrDestMask : 0)
409 | (flags & HAL_TXDESC_INTREQ ? AR_TxIntrReq : 0);
410 ads->ds_ctl1 |= (flags & HAL_TXDESC_NOACK ? AR_NoAck : 0);
411 ads->ds_ctl2 |= SM(txTries0, AR_XmitDataTries0);
412 ads->ds_ctl3 |= (txRate0 << AR_XmitRate0_S);
413 ads->ds_ctl7 = SM(AH5416(ah)->ah_tx_chainmask, AR_ChainSel0)
414 | SM(AH5416(ah)->ah_tx_chainmask, AR_ChainSel1)
415 | SM(AH5416(ah)->ah_tx_chainmask, AR_ChainSel2)
416 | SM(AH5416(ah)->ah_tx_chainmask, AR_ChainSel3);
419 ads->ds_ctl8 = SM(0, AR_AntCtl0);
420 ads->ds_ctl9 = SM(0, AR_AntCtl1) | SM(txPower, AR_XmitPower1);
421 ads->ds_ctl10 = SM(0, AR_AntCtl2) | SM(txPower, AR_XmitPower2);
422 ads->ds_ctl11 = SM(0, AR_AntCtl3) | SM(txPower, AR_XmitPower3);
424 ads->ds_ctl6 &= ~(0xffff);
425 ads->ds_ctl6 |= SM(aggrLen, AR_AggrLen);
427 if (flags & RTSCTS) {
428 /* XXX validate rtsctsDuration */
429 ads->ds_ctl0 |= (flags & HAL_TXDESC_CTSENA ? AR_CTSEnable : 0)
430 | (flags & HAL_TXDESC_RTSENA ? AR_RTSEnable : 0);
434 * Set the TX antenna to 0 for Kite
435 * To preserve existing behaviour, also set the TPC bits to 0;
436 * when TPC is enabled these should be filled in appropriately.
438 if (AR_SREV_KITE(ah)) {
439 ads->ds_ctl8 = SM(0, AR_AntCtl0);
440 ads->ds_ctl9 = SM(0, AR_AntCtl1) | SM(0, AR_XmitPower1);
441 ads->ds_ctl10 = SM(0, AR_AntCtl2) | SM(0, AR_XmitPower2);
442 ads->ds_ctl11 = SM(0, AR_AntCtl3) | SM(0, AR_XmitPower3);
450 ar5416SetupLastTxDesc(struct ath_hal *ah, struct ath_desc *ds,
451 const struct ath_desc *ds0)
453 struct ar5416_desc *ads = AR5416DESC(ds);
455 ads->ds_ctl1 &= ~AR_MoreAggr;
456 ads->ds_ctl6 &= ~AR_PadDelim;
458 /* hack to copy rate info to last desc for later processing */
459 #ifdef AH_NEED_DESC_SWAP
460 ads->ds_ctl2 = __bswap32(AR5416DESC_CONST(ds0)->ds_ctl2);
461 ads->ds_ctl3 = __bswap32(AR5416DESC_CONST(ds0)->ds_ctl3);
463 ads->ds_ctl2 = AR5416DESC_CONST(ds0)->ds_ctl2;
464 ads->ds_ctl3 = AR5416DESC_CONST(ds0)->ds_ctl3;
470 #ifdef AH_NEED_DESC_SWAP
471 /* Swap transmit descriptor */
473 ar5416SwapTxDesc(struct ath_desc *ds)
475 ds->ds_data = __bswap32(ds->ds_data);
476 ds->ds_ctl0 = __bswap32(ds->ds_ctl0);
477 ds->ds_ctl1 = __bswap32(ds->ds_ctl1);
478 ds->ds_hw[0] = __bswap32(ds->ds_hw[0]);
479 ds->ds_hw[1] = __bswap32(ds->ds_hw[1]);
480 ds->ds_hw[2] = __bswap32(ds->ds_hw[2]);
481 ds->ds_hw[3] = __bswap32(ds->ds_hw[3]);
486 * Processing of HW TX descriptor.
489 ar5416ProcTxDesc(struct ath_hal *ah,
490 struct ath_desc *ds, struct ath_tx_status *ts)
492 struct ar5416_desc *ads = AR5416DESC(ds);
493 uint32_t *ds_txstatus = AR5416_DS_TXSTATUS(ah,ads);
495 #ifdef AH_NEED_DESC_SWAP
496 if ((ds_txstatus[9] & __bswap32(AR_TxDone)) == 0)
497 return HAL_EINPROGRESS;
498 ar5416SwapTxDesc(ds);
500 if ((ds_txstatus[9] & AR_TxDone) == 0)
501 return HAL_EINPROGRESS;
504 /* Update software copies of the HW status */
505 ts->ts_seqnum = MS(ds_txstatus[9], AR_SeqNum);
506 ts->ts_tstamp = AR_SendTimestamp(ds_txstatus);
509 if (ds_txstatus[1] & AR_ExcessiveRetries)
510 ts->ts_status |= HAL_TXERR_XRETRY;
511 if (ds_txstatus[1] & AR_Filtered)
512 ts->ts_status |= HAL_TXERR_FILT;
513 if (ds_txstatus[1] & AR_FIFOUnderrun)
514 ts->ts_status |= HAL_TXERR_FIFO;
515 if (ds_txstatus[9] & AR_TxOpExceeded)
516 ts->ts_status |= HAL_TXERR_XTXOP;
517 if (ds_txstatus[1] & AR_TxTimerExpired)
518 ts->ts_status |= HAL_TXERR_TIMER_EXPIRED;
521 if (ds_txstatus[0] & AR_TxBaStatus) {
522 ts->ts_flags |= HAL_TX_BA;
523 ts->ts_ba_low = AR_BaBitmapLow(ds_txstatus);
524 ts->ts_ba_high = AR_BaBitmapHigh(ds_txstatus);
526 if (ds->ds_ctl1 & AR_IsAggr)
527 ts->ts_flags |= HAL_TX_AGGR;
528 if (ds_txstatus[1] & AR_DescCfgErr)
529 ts->ts_flags |= HAL_TX_DESC_CFG_ERR;
530 if (ds_txstatus[1] & AR_TxDataUnderrun)
531 ts->ts_flags |= HAL_TX_DATA_UNDERRUN;
532 if (ds_txstatus[1] & AR_TxDelimUnderrun)
533 ts->ts_flags |= HAL_TX_DELIM_UNDERRUN;
536 * Extract the transmit rate used and mark the rate as
537 * ``alternate'' if it wasn't the series 0 rate.
539 ts->ts_finaltsi = MS(ds_txstatus[9], AR_FinalTxIdx);
540 switch (ts->ts_finaltsi) {
542 ts->ts_rate = MS(ads->ds_ctl3, AR_XmitRate0);
545 ts->ts_rate = MS(ads->ds_ctl3, AR_XmitRate1);
548 ts->ts_rate = MS(ads->ds_ctl3, AR_XmitRate2);
551 ts->ts_rate = MS(ads->ds_ctl3, AR_XmitRate3);
555 ts->ts_rssi = MS(ds_txstatus[5], AR_TxRSSICombined);
556 ts->ts_rssi_ctl[0] = MS(ds_txstatus[0], AR_TxRSSIAnt00);
557 ts->ts_rssi_ctl[1] = MS(ds_txstatus[0], AR_TxRSSIAnt01);
558 ts->ts_rssi_ctl[2] = MS(ds_txstatus[0], AR_TxRSSIAnt02);
559 ts->ts_rssi_ext[0] = MS(ds_txstatus[5], AR_TxRSSIAnt10);
560 ts->ts_rssi_ext[1] = MS(ds_txstatus[5], AR_TxRSSIAnt11);
561 ts->ts_rssi_ext[2] = MS(ds_txstatus[5], AR_TxRSSIAnt12);
562 ts->ts_evm0 = AR_TxEVM0(ds_txstatus);
563 ts->ts_evm1 = AR_TxEVM1(ds_txstatus);
564 ts->ts_evm2 = AR_TxEVM2(ds_txstatus);
566 ts->ts_shortretry = MS(ds_txstatus[1], AR_RTSFailCnt);
567 ts->ts_longretry = MS(ds_txstatus[1], AR_DataFailCnt);
569 * The retry count has the number of un-acked tries for the
570 * final series used. When doing multi-rate retry we must
571 * fixup the retry count by adding in the try counts for
572 * each series that was fully-processed. Beware that this
573 * takes values from the try counts in the final descriptor.
574 * These are not required by the hardware. We assume they
575 * are placed there by the driver as otherwise we have no
576 * access and the driver can't do the calculation because it
577 * doesn't know the descriptor format.
579 switch (ts->ts_finaltsi) {
580 case 3: ts->ts_longretry += MS(ads->ds_ctl2, AR_XmitDataTries2);
581 case 2: ts->ts_longretry += MS(ads->ds_ctl2, AR_XmitDataTries1);
582 case 1: ts->ts_longretry += MS(ads->ds_ctl2, AR_XmitDataTries0);
586 * These fields are not used. Zero these to preserve compatability
587 * with existing drivers.
589 ts->ts_virtcol = MS(ads->ds_ctl1, AR_VirtRetryCnt);
590 ts->ts_antenna = 0; /* We don't switch antennas on Owl*/
592 /* handle tx trigger level changes internally */
593 if ((ts->ts_status & HAL_TXERR_FIFO) ||
594 (ts->ts_flags & (HAL_TX_DATA_UNDERRUN | HAL_TX_DELIM_UNDERRUN)))
595 ar5212UpdateTxTrigLevel(ah, AH_TRUE);
601 ar5416SetGlobalTxTimeout(struct ath_hal *ah, u_int tu)
603 struct ath_hal_5416 *ahp = AH5416(ah);
606 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad global tx timeout %u\n",
608 /* restore default handling */
609 ahp->ah_globaltxtimeout = (u_int) -1;
612 OS_REG_RMW_FIELD(ah, AR_GTXTO, AR_GTXTO_TIMEOUT_LIMIT, tu);
613 ahp->ah_globaltxtimeout = tu;
618 ar5416GetGlobalTxTimeout(struct ath_hal *ah)
620 return MS(OS_REG_READ(ah, AR_GTXTO), AR_GTXTO_TIMEOUT_LIMIT);
624 ar5416Set11nRateScenario(struct ath_hal *ah, struct ath_desc *ds,
625 u_int durUpdateEn, u_int rtsctsRate,
626 HAL_11N_RATE_SERIES series[], u_int nseries, u_int flags)
628 struct ar5416_desc *ads = AR5416DESC(ds);
631 HALASSERT(nseries == 4);
635 * XXX since the upper layers doesn't know the current chainmask
636 * XXX setup, just override its decisions here.
637 * XXX The upper layers need to be taught this!
639 if (series[0].Tries != 0)
640 series[0].ChSel = AH5416(ah)->ah_tx_chainmask;
641 if (series[1].Tries != 0)
642 series[1].ChSel = AH5416(ah)->ah_tx_chainmask;
643 if (series[2].Tries != 0)
644 series[2].ChSel = AH5416(ah)->ah_tx_chainmask;
645 if (series[3].Tries != 0)
646 series[3].ChSel = AH5416(ah)->ah_tx_chainmask;
649 * Only one of RTS and CTS enable must be set.
650 * If a frame has both set, just do RTS protection -
651 * that's enough to satisfy legacy protection.
653 if (flags & (HAL_TXDESC_RTSENA | HAL_TXDESC_CTSENA)) {
654 ds_ctl0 = ads->ds_ctl0;
656 if (flags & HAL_TXDESC_RTSENA) {
657 ds_ctl0 &= ~AR_CTSEnable;
658 ds_ctl0 |= AR_RTSEnable;
660 ds_ctl0 &= ~AR_RTSEnable;
661 ds_ctl0 |= AR_CTSEnable;
664 ads->ds_ctl0 = ds_ctl0;
667 (ads->ds_ctl0 & ~(AR_RTSEnable | AR_CTSEnable));
670 ads->ds_ctl2 = set11nTries(series, 0)
671 | set11nTries(series, 1)
672 | set11nTries(series, 2)
673 | set11nTries(series, 3)
674 | (durUpdateEn ? AR_DurUpdateEn : 0);
676 ads->ds_ctl3 = set11nRate(series, 0)
677 | set11nRate(series, 1)
678 | set11nRate(series, 2)
679 | set11nRate(series, 3);
681 ads->ds_ctl4 = set11nPktDurRTSCTS(series, 0)
682 | set11nPktDurRTSCTS(series, 1);
684 ads->ds_ctl5 = set11nPktDurRTSCTS(series, 2)
685 | set11nPktDurRTSCTS(series, 3);
687 ads->ds_ctl7 = set11nRateFlags(series, 0)
688 | set11nRateFlags(series, 1)
689 | set11nRateFlags(series, 2)
690 | set11nRateFlags(series, 3)
691 | SM(rtsctsRate, AR_RTSCTSRate);
695 ar5416Set11nAggrMiddle(struct ath_hal *ah, struct ath_desc *ds, u_int numDelims)
697 struct ar5416_desc *ads = AR5416DESC(ds);
698 uint32_t *ds_txstatus = AR5416_DS_TXSTATUS(ah,ads);
700 ads->ds_ctl1 |= (AR_IsAggr | AR_MoreAggr);
702 ads->ds_ctl6 &= ~AR_PadDelim;
703 ads->ds_ctl6 |= SM(numDelims, AR_PadDelim);
704 ads->ds_ctl6 &= ~AR_AggrLen;
707 * Clear the TxDone status here, may need to change
708 * func name to reflect this
710 ds_txstatus[9] &= ~AR_TxDone;
714 ar5416Clr11nAggr(struct ath_hal *ah, struct ath_desc *ds)
716 struct ar5416_desc *ads = AR5416DESC(ds);
718 ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr);
719 ads->ds_ctl6 &= ~AR_PadDelim;
720 ads->ds_ctl6 &= ~AR_AggrLen;
724 ar5416Set11nBurstDuration(struct ath_hal *ah, struct ath_desc *ds,
727 struct ar5416_desc *ads = AR5416DESC(ds);
729 ads->ds_ctl2 &= ~AR_BurstDur;
730 ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur);
734 * Retrieve the rate table from the given TX completion descriptor
737 ar5416GetTxCompletionRates(struct ath_hal *ah, const struct ath_desc *ds0, int *rates, int *tries)
739 const struct ar5416_desc *ads = AR5416DESC_CONST(ds0);
741 rates[0] = MS(ads->ds_ctl3, AR_XmitRate0);
742 rates[1] = MS(ads->ds_ctl3, AR_XmitRate1);
743 rates[2] = MS(ads->ds_ctl3, AR_XmitRate2);
744 rates[3] = MS(ads->ds_ctl3, AR_XmitRate3);
746 tries[0] = MS(ads->ds_ctl2, AR_XmitDataTries0);
747 tries[1] = MS(ads->ds_ctl2, AR_XmitDataTries1);
748 tries[2] = MS(ads->ds_ctl2, AR_XmitDataTries2);
749 tries[3] = MS(ads->ds_ctl2, AR_XmitDataTries3);
756 * TX queue management routines - AR5416 and later chipsets
760 * Allocate and initialize a tx DCU/QCU combination.
763 ar5416SetupTxQueue(struct ath_hal *ah, HAL_TX_QUEUE type,
764 const HAL_TXQ_INFO *qInfo)
766 struct ath_hal_5212 *ahp = AH5212(ah);
767 HAL_TX_QUEUE_INFO *qi;
768 HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
771 /* by default enable OK+ERR+DESC+URN interrupts */
772 defqflags = HAL_TXQ_TXOKINT_ENABLE
773 | HAL_TXQ_TXERRINT_ENABLE
774 | HAL_TXQ_TXDESCINT_ENABLE
775 | HAL_TXQ_TXURNINT_ENABLE;
776 /* XXX move queue assignment to driver */
778 case HAL_TX_QUEUE_BEACON:
779 q = pCap->halTotalQueues-1; /* highest priority */
780 defqflags |= HAL_TXQ_DBA_GATED
781 | HAL_TXQ_CBR_DIS_QEMPTY
782 | HAL_TXQ_ARB_LOCKOUT_GLOBAL
783 | HAL_TXQ_BACKOFF_DISABLE;
785 case HAL_TX_QUEUE_CAB:
786 q = pCap->halTotalQueues-2; /* next highest priority */
787 defqflags |= HAL_TXQ_DBA_GATED
788 | HAL_TXQ_CBR_DIS_QEMPTY
789 | HAL_TXQ_CBR_DIS_BEMPTY
790 | HAL_TXQ_ARB_LOCKOUT_GLOBAL
791 | HAL_TXQ_BACKOFF_DISABLE;
793 case HAL_TX_QUEUE_PSPOLL:
794 q = 1; /* lowest priority */
795 defqflags |= HAL_TXQ_DBA_GATED
796 | HAL_TXQ_CBR_DIS_QEMPTY
797 | HAL_TXQ_CBR_DIS_BEMPTY
798 | HAL_TXQ_ARB_LOCKOUT_GLOBAL
799 | HAL_TXQ_BACKOFF_DISABLE;
801 case HAL_TX_QUEUE_UAPSD:
802 q = pCap->halTotalQueues-3; /* nextest highest priority */
803 if (ahp->ah_txq[q].tqi_type != HAL_TX_QUEUE_INACTIVE) {
804 HALDEBUG(ah, HAL_DEBUG_ANY,
805 "%s: no available UAPSD tx queue\n", __func__);
809 case HAL_TX_QUEUE_DATA:
810 for (q = 0; q < pCap->halTotalQueues; q++)
811 if (ahp->ah_txq[q].tqi_type == HAL_TX_QUEUE_INACTIVE)
813 if (q == pCap->halTotalQueues) {
814 HALDEBUG(ah, HAL_DEBUG_ANY,
815 "%s: no available tx queue\n", __func__);
820 HALDEBUG(ah, HAL_DEBUG_ANY,
821 "%s: bad tx queue type %u\n", __func__, type);
825 HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: queue %u\n", __func__, q);
827 qi = &ahp->ah_txq[q];
828 if (qi->tqi_type != HAL_TX_QUEUE_INACTIVE) {
829 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: tx queue %u already active\n",
833 OS_MEMZERO(qi, sizeof(HAL_TX_QUEUE_INFO));
835 if (qInfo == AH_NULL) {
836 qi->tqi_qflags = defqflags;
837 qi->tqi_aifs = INIT_AIFS;
838 qi->tqi_cwmin = HAL_TXQ_USEDEFAULT; /* NB: do at reset */
839 qi->tqi_cwmax = INIT_CWMAX;
840 qi->tqi_shretry = INIT_SH_RETRY;
841 qi->tqi_lgretry = INIT_LG_RETRY;
842 qi->tqi_physCompBuf = 0;
844 qi->tqi_physCompBuf = qInfo->tqi_compBuf;
845 (void) ar5212SetTxQueueProps(ah, q, qInfo);
847 /* NB: must be followed by ar5212ResetTxQueue */
852 * Update the h/w interrupt registers to reflect a tx q's configuration.
855 setTxQInterrupts(struct ath_hal *ah, HAL_TX_QUEUE_INFO *qi)
857 struct ath_hal_5212 *ahp = AH5212(ah);
859 HALDEBUG(ah, HAL_DEBUG_TXQUEUE,
860 "%s: tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n", __func__,
861 ahp->ah_txOkInterruptMask, ahp->ah_txErrInterruptMask,
862 ahp->ah_txDescInterruptMask, ahp->ah_txEolInterruptMask,
863 ahp->ah_txUrnInterruptMask);
865 OS_REG_WRITE(ah, AR_IMR_S0,
866 SM(ahp->ah_txOkInterruptMask, AR_IMR_S0_QCU_TXOK)
867 | SM(ahp->ah_txDescInterruptMask, AR_IMR_S0_QCU_TXDESC)
869 OS_REG_WRITE(ah, AR_IMR_S1,
870 SM(ahp->ah_txErrInterruptMask, AR_IMR_S1_QCU_TXERR)
871 | SM(ahp->ah_txEolInterruptMask, AR_IMR_S1_QCU_TXEOL)
873 OS_REG_RMW_FIELD(ah, AR_IMR_S2,
874 AR_IMR_S2_QCU_TXURN, ahp->ah_txUrnInterruptMask);
878 * Set the retry, aifs, cwmin/max, readyTime regs for specified queue
880 * phwChannel has been set to point to the current channel
883 ar5416ResetTxQueue(struct ath_hal *ah, u_int q)
885 struct ath_hal_5212 *ahp = AH5212(ah);
886 HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
887 const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
888 HAL_TX_QUEUE_INFO *qi;
889 uint32_t cwMin, chanCwMin, value, qmisc, dmisc;
891 if (q >= pCap->halTotalQueues) {
892 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid queue num %u\n",
896 qi = &ahp->ah_txq[q];
897 if (qi->tqi_type == HAL_TX_QUEUE_INACTIVE) {
898 HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: inactive queue %u\n",
900 return AH_TRUE; /* XXX??? */
903 HALDEBUG(ah, HAL_DEBUG_TXQUEUE, "%s: reset queue %u\n", __func__, q);
905 if (qi->tqi_cwmin == HAL_TXQ_USEDEFAULT) {
907 * Select cwmin according to channel type.
908 * NB: chan can be NULL during attach
910 if (chan && IEEE80211_IS_CHAN_B(chan))
911 chanCwMin = INIT_CWMIN_11B;
913 chanCwMin = INIT_CWMIN;
914 /* make sure that the CWmin is of the form (2^n - 1) */
915 for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1)
918 cwMin = qi->tqi_cwmin;
920 /* set cwMin/Max and AIFS values */
921 OS_REG_WRITE(ah, AR_DLCL_IFS(q),
922 SM(cwMin, AR_D_LCL_IFS_CWMIN)
923 | SM(qi->tqi_cwmax, AR_D_LCL_IFS_CWMAX)
924 | SM(qi->tqi_aifs, AR_D_LCL_IFS_AIFS));
926 /* Set retry limit values */
927 OS_REG_WRITE(ah, AR_DRETRY_LIMIT(q),
928 SM(INIT_SSH_RETRY, AR_D_RETRY_LIMIT_STA_SH)
929 | SM(INIT_SLG_RETRY, AR_D_RETRY_LIMIT_STA_LG)
930 | SM(qi->tqi_lgretry, AR_D_RETRY_LIMIT_FR_LG)
931 | SM(qi->tqi_shretry, AR_D_RETRY_LIMIT_FR_SH)
934 /* NB: always enable early termination on the QCU */
935 qmisc = AR_Q_MISC_DCU_EARLY_TERM_REQ
936 | SM(AR_Q_MISC_FSP_ASAP, AR_Q_MISC_FSP);
938 /* NB: always enable DCU to wait for next fragment from QCU */
939 dmisc = AR_D_MISC_FRAG_WAIT_EN;
941 /* Enable exponential backoff window */
942 dmisc |= AR_D_MISC_BKOFF_PERSISTENCE;
945 * The chip reset default is to use a DCU backoff threshold of 0x2.
946 * Restore this when programming the DCU MISC register.
950 /* multiqueue support */
951 if (qi->tqi_cbrPeriod) {
952 OS_REG_WRITE(ah, AR_QCBRCFG(q),
953 SM(qi->tqi_cbrPeriod,AR_Q_CBRCFG_CBR_INTERVAL)
954 | SM(qi->tqi_cbrOverflowLimit, AR_Q_CBRCFG_CBR_OVF_THRESH));
955 qmisc = (qmisc &~ AR_Q_MISC_FSP) | AR_Q_MISC_FSP_CBR;
956 if (qi->tqi_cbrOverflowLimit)
957 qmisc |= AR_Q_MISC_CBR_EXP_CNTR_LIMIT;
959 if (qi->tqi_readyTime) {
960 OS_REG_WRITE(ah, AR_QRDYTIMECFG(q),
961 SM(qi->tqi_readyTime, AR_Q_RDYTIMECFG_INT)
962 | AR_Q_RDYTIMECFG_ENA);
965 OS_REG_WRITE(ah, AR_DCHNTIME(q),
966 SM(qi->tqi_burstTime, AR_D_CHNTIME_DUR)
967 | (qi->tqi_burstTime ? AR_D_CHNTIME_EN : 0));
969 if (qi->tqi_readyTime &&
970 (qi->tqi_qflags & HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE))
971 qmisc |= AR_Q_MISC_RDYTIME_EXP_POLICY;
972 if (qi->tqi_qflags & HAL_TXQ_DBA_GATED)
973 qmisc = (qmisc &~ AR_Q_MISC_FSP) | AR_Q_MISC_FSP_DBA_GATED;
974 if (MS(qmisc, AR_Q_MISC_FSP) != AR_Q_MISC_FSP_ASAP) {
976 * These are meangingful only when not scheduled asap.
978 if (qi->tqi_qflags & HAL_TXQ_CBR_DIS_BEMPTY)
979 qmisc |= AR_Q_MISC_CBR_INCR_DIS0;
981 qmisc &= ~AR_Q_MISC_CBR_INCR_DIS0;
982 if (qi->tqi_qflags & HAL_TXQ_CBR_DIS_QEMPTY)
983 qmisc |= AR_Q_MISC_CBR_INCR_DIS1;
985 qmisc &= ~AR_Q_MISC_CBR_INCR_DIS1;
988 if (qi->tqi_qflags & HAL_TXQ_BACKOFF_DISABLE)
989 dmisc |= AR_D_MISC_POST_FR_BKOFF_DIS;
990 if (qi->tqi_qflags & HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE)
991 dmisc |= AR_D_MISC_FRAG_BKOFF_EN;
992 if (qi->tqi_qflags & HAL_TXQ_ARB_LOCKOUT_GLOBAL)
993 dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
994 AR_D_MISC_ARB_LOCKOUT_CNTRL);
995 else if (qi->tqi_qflags & HAL_TXQ_ARB_LOCKOUT_INTRA)
996 dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_INTRA_FR,
997 AR_D_MISC_ARB_LOCKOUT_CNTRL);
998 if (qi->tqi_qflags & HAL_TXQ_IGNORE_VIRTCOL)
999 dmisc |= SM(AR_D_MISC_VIR_COL_HANDLING_IGNORE,
1000 AR_D_MISC_VIR_COL_HANDLING);
1001 if (qi->tqi_qflags & HAL_TXQ_SEQNUM_INC_DIS)
1002 dmisc |= AR_D_MISC_SEQ_NUM_INCR_DIS;
1005 * Fillin type-dependent bits. Most of this can be
1006 * removed by specifying the queue parameters in the
1007 * driver; it's here for backwards compatibility.
1009 switch (qi->tqi_type) {
1010 case HAL_TX_QUEUE_BEACON: /* beacon frames */
1011 qmisc |= AR_Q_MISC_FSP_DBA_GATED
1012 | AR_Q_MISC_BEACON_USE
1013 | AR_Q_MISC_CBR_INCR_DIS1;
1015 dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
1016 AR_D_MISC_ARB_LOCKOUT_CNTRL)
1017 | AR_D_MISC_BEACON_USE
1018 | AR_D_MISC_POST_FR_BKOFF_DIS;
1020 case HAL_TX_QUEUE_CAB: /* CAB frames */
1022 * No longer Enable AR_Q_MISC_RDYTIME_EXP_POLICY,
1023 * There is an issue with the CAB Queue
1024 * not properly refreshing the Tx descriptor if
1025 * the TXE clear setting is used.
1027 qmisc |= AR_Q_MISC_FSP_DBA_GATED
1028 | AR_Q_MISC_CBR_INCR_DIS1
1029 | AR_Q_MISC_CBR_INCR_DIS0;
1031 if (!qi->tqi_readyTime) {
1033 * NB: don't set default ready time if driver
1034 * has explicitly specified something. This is
1035 * here solely for backwards compatibility.
1037 value = (ahp->ah_beaconInterval
1038 - (ah->ah_config.ah_sw_beacon_response_time -
1039 ah->ah_config.ah_dma_beacon_response_time)
1040 - ah->ah_config.ah_additional_swba_backoff) * 1024;
1041 OS_REG_WRITE(ah, AR_QRDYTIMECFG(q), value | AR_Q_RDYTIMECFG_ENA);
1043 dmisc |= SM(AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL,
1044 AR_D_MISC_ARB_LOCKOUT_CNTRL);
1046 case HAL_TX_QUEUE_PSPOLL:
1047 qmisc |= AR_Q_MISC_CBR_INCR_DIS1;
1049 case HAL_TX_QUEUE_UAPSD:
1050 dmisc |= AR_D_MISC_POST_FR_BKOFF_DIS;
1052 default: /* NB: silence compiler */
1056 OS_REG_WRITE(ah, AR_QMISC(q), qmisc);
1057 OS_REG_WRITE(ah, AR_DMISC(q), dmisc);
1059 /* Setup compression scratchpad buffer */
1061 * XXX: calling this asynchronously to queue operation can
1062 * cause unexpected behavior!!!
1064 if (qi->tqi_physCompBuf) {
1065 HALASSERT(qi->tqi_type == HAL_TX_QUEUE_DATA ||
1066 qi->tqi_type == HAL_TX_QUEUE_UAPSD);
1067 OS_REG_WRITE(ah, AR_Q_CBBS, (80 + 2*q));
1068 OS_REG_WRITE(ah, AR_Q_CBBA, qi->tqi_physCompBuf);
1069 OS_REG_WRITE(ah, AR_Q_CBC, HAL_COMP_BUF_MAX_SIZE/1024);
1070 OS_REG_WRITE(ah, AR_Q0_MISC + 4*q,
1071 OS_REG_READ(ah, AR_Q0_MISC + 4*q)
1072 | AR_Q_MISC_QCU_COMP_EN);
1076 * Always update the secondary interrupt mask registers - this
1077 * could be a new queue getting enabled in a running system or
1078 * hw getting re-initialized during a reset!
1080 * Since we don't differentiate between tx interrupts corresponding
1081 * to individual queues - secondary tx mask regs are always unmasked;
1082 * tx interrupts are enabled/disabled for all queues collectively
1083 * using the primary mask reg
1085 if (qi->tqi_qflags & HAL_TXQ_TXOKINT_ENABLE)
1086 ahp->ah_txOkInterruptMask |= 1 << q;
1088 ahp->ah_txOkInterruptMask &= ~(1 << q);
1089 if (qi->tqi_qflags & HAL_TXQ_TXERRINT_ENABLE)
1090 ahp->ah_txErrInterruptMask |= 1 << q;
1092 ahp->ah_txErrInterruptMask &= ~(1 << q);
1093 if (qi->tqi_qflags & HAL_TXQ_TXDESCINT_ENABLE)
1094 ahp->ah_txDescInterruptMask |= 1 << q;
1096 ahp->ah_txDescInterruptMask &= ~(1 << q);
1097 if (qi->tqi_qflags & HAL_TXQ_TXEOLINT_ENABLE)
1098 ahp->ah_txEolInterruptMask |= 1 << q;
1100 ahp->ah_txEolInterruptMask &= ~(1 << q);
1101 if (qi->tqi_qflags & HAL_TXQ_TXURNINT_ENABLE)
1102 ahp->ah_txUrnInterruptMask |= 1 << q;
1104 ahp->ah_txUrnInterruptMask &= ~(1 << q);
1105 setTxQInterrupts(ah, qi);