2 * Copyright (c) 2011 Adrian Chadd, Xenion Pty Ltd.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include "ah_internal.h"
32 #include "ah_eeprom_v14.h"
34 #include "ar9002/ar9280.h"
35 #include "ar5416/ar5416reg.h"
36 #include "ar5416/ar5416phy.h"
37 #include "ar9002/ar9002phy.h"
39 #include "ar9002/ar9280_olc.h"
42 ar9280olcInit(struct ath_hal *ah)
46 /* Only do OLC if it's enabled for this chipset */
47 if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL))
50 HALDEBUG(ah, HAL_DEBUG_RESET, "%s: Setting up TX gain tables.\n", __func__);
52 for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++)
53 AH9280(ah)->originalGain[i] = MS(OS_REG_READ(ah,
54 AR_PHY_TX_GAIN_TBL1 + i * 4), AR_PHY_TX_GAIN);
56 AH9280(ah)->PDADCdelta = 0;
60 ar9280olcGetTxGainIndex(struct ath_hal *ah,
61 const struct ieee80211_channel *chan,
62 struct calDataPerFreqOpLoop *rawDatasetOpLoop,
63 uint8_t *calChans, uint16_t availPiers, uint8_t *pwr, uint8_t *pcdacIdx)
66 uint16_t idxL = 0, idxR = 0, numPiers;
70 ar5416GetChannelCenters(ah, chan, ¢ers);
72 for (numPiers = 0; numPiers < availPiers; numPiers++)
73 if (calChans[numPiers] == AR5416_BCHAN_UNUSED)
76 match = ath_ee_getLowerUpperIndex((uint8_t)FREQ2FBIN(centers.synth_center,
77 IEEE80211_IS_CHAN_2GHZ(chan)), calChans, numPiers,
80 pcdac = rawDatasetOpLoop[idxL].pcdac[0][0];
81 *pwr = rawDatasetOpLoop[idxL].pwrPdg[0][0];
83 pcdac = rawDatasetOpLoop[idxR].pcdac[0][0];
84 *pwr = (rawDatasetOpLoop[idxL].pwrPdg[0][0] +
85 rawDatasetOpLoop[idxR].pwrPdg[0][0])/2;
87 while (pcdac > AH9280(ah)->originalGain[i] &&
88 i < (AR9280_TX_GAIN_TABLE_SIZE - 1))
95 * XXX txPower here is likely not the target txPower in the traditional
96 * XXX sense, but is set by a call to ar9280olcGetTxGainIndex().
97 * XXX Thus, be careful if you're trying to use this routine yourself.
100 ar9280olcGetPDADCs(struct ath_hal *ah, uint32_t initTxGain, int txPower,
101 uint8_t *pPDADCValues)
106 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_0, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
107 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_1, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
109 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL7, AR_PHY_TX_PWRCTRL_INIT_TX_GAIN, initTxGain);
112 for (i = 0; i < AR5416_NUM_PDADC_VALUES; i++)
114 pPDADCValues[i] = 0x0;
116 pPDADCValues[i] = 0xFF;
120 * Run temperature compensation calibration.
122 * The TX gain table is adjusted depending upon the difference
123 * between the initial PDADC value and the currently read
124 * average TX power sample value. This value is only valid if
125 * frames have been transmitted, so currPDADC will be 0 if
126 * no frames have yet been transmitted.
129 ar9280olcTemperatureCompensation(struct ath_hal *ah)
132 int delta, currPDADC, regval;
135 if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL))
138 rddata = OS_REG_READ(ah, AR_PHY_TX_PWRCTRL4);
139 currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
141 HALDEBUG(ah, HAL_DEBUG_PERCAL,
142 "%s: called: initPDADC=%d, currPDADC=%d\n",
143 __func__, AH5416(ah)->initPDADC, currPDADC);
145 if (AH5416(ah)->initPDADC == 0 || currPDADC == 0)
148 (void) (ath_hal_eepromGet(ah, AR_EEP_DAC_HPWR_5G, &hpwr_5g));
151 delta = (currPDADC - AH5416(ah)->initPDADC + 4) / 8;
153 delta = (currPDADC - AH5416(ah)->initPDADC + 5) / 10;
155 HALDEBUG(ah, HAL_DEBUG_PERCAL, "%s: delta=%d, PDADCdelta=%d\n",
156 __func__, delta, AH9280(ah)->PDADCdelta);
158 if (delta != AH9280(ah)->PDADCdelta) {
159 AH9280(ah)->PDADCdelta = delta;
160 for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
161 regval = AH9280(ah)->originalGain[i] - delta;
166 AR_PHY_TX_GAIN_TBL1 + i * 4,
167 AR_PHY_TX_GAIN, regval);
174 ar9280ChangeGainBoundarySettings(struct ath_hal *ah, uint16_t *gb,
175 uint16_t numXpdGain, uint16_t pdGainOverlap_t2, int8_t pwr_table_offset,
180 /* Prior to writing the boundaries or the pdadc vs. power table
181 * into the chip registers the default starting point on the pdadc
182 * vs. power table needs to be checked and the curve boundaries
183 * adjusted accordingly
185 if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
188 if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
189 /* get the difference in dB */
190 *diff = (uint16_t)(pwr_table_offset - AR5416_PWR_TABLE_OFFSET_DB);
191 /* get the number of half dB steps */
193 /* change the original gain boundary settings
194 * by the number of half dB steps
196 for (k = 0; k < numXpdGain; k++)
197 gb[k] = (uint16_t)(gb[k] - *diff);
199 /* Because of a hardware limitation, ensure the gain boundary
200 * is not larger than (63 - overlap)
202 gb_limit = (uint16_t)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2);
204 for (k = 0; k < numXpdGain; k++)
205 gb[k] = (uint16_t)min(gb_limit, gb[k]);
212 ar9280AdjustPDADCValues(struct ath_hal *ah, int8_t pwr_table_offset,
213 int16_t diff, uint8_t *pdadcValues)
215 #define NUM_PDADC(diff) (AR5416_NUM_PDADC_VALUES - diff)
218 /* If this is a board that has a pwrTableOffset that differs from
219 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the
220 * pdadc vs pwr table needs to be adjusted prior to writing to the
223 if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
224 if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
225 /* shift the table to start at the new offset */
226 for (k = 0; k < (uint16_t)NUM_PDADC(diff); k++ ) {
227 pdadcValues[k] = pdadcValues[k + diff];
230 /* fill the back of the table */
231 for (k = (uint16_t)NUM_PDADC(diff); k < NUM_PDADC(0); k++) {
232 pdadcValues[k] = pdadcValues[NUM_PDADC(diff)];
239 * This effectively disables the gain boundaries leaving it
240 * to the open-loop TX power control.
243 ar9280SetGainBoundariesOpenLoop(struct ath_hal *ah, int i,
244 uint16_t pdGainOverlap_t2, uint16_t gainBoundaries[])
248 regChainOffset = ar5416GetRegChainOffset(ah, i);
250 /* These are unused for OLC */
251 (void) pdGainOverlap_t2;
252 (void) gainBoundaries;
254 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: chain %d: writing closed loop values\n",
257 OS_REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset,
258 SM(0x6, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) |
259 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) |
260 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) |
261 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) |
262 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
265 /* Eeprom versioning macros. Returns true if the version is equal or newer than the ver specified */
266 /* XXX shouldn't be here! */
267 #define EEP_MINOR(_ah) \
268 (AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK)
269 #define IS_EEP_MINOR_V2(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_2)
270 #define IS_EEP_MINOR_V3(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_3)
272 /**************************************************************
273 * ar9280SetPowerCalTable
275 * Pull the PDADC piers from cal data and interpolate them across the given
276 * points as well as from the nearest pier(s) to get a power detector
277 * linear voltage to power level table.
279 * Handle OLC for Merlin where required.
282 ar9280SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData,
283 const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset)
285 CAL_DATA_PER_FREQ *pRawDataset;
286 uint8_t *pCalBChans = AH_NULL;
287 uint16_t pdGainOverlap_t2;
288 static uint8_t pdadcValues[AR5416_NUM_PDADC_VALUES];
289 uint16_t gainBoundaries[AR5416_PD_GAINS_IN_MASK];
290 uint16_t numPiers, i;
291 int16_t tMinCalPower;
292 uint16_t numXpdGain, xpdMask;
293 uint16_t xpdGainValues[AR5416_NUM_PD_GAINS];
294 uint32_t regChainOffset;
295 int8_t pwr_table_offset;
297 OS_MEMZERO(xpdGainValues, sizeof(xpdGainValues));
299 xpdMask = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].xpdGain;
301 (void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET, &pwr_table_offset);
304 if (IS_EEP_MINOR_V2(ah)) {
305 pdGainOverlap_t2 = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].pdGainOverlap;
307 pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
310 if (IEEE80211_IS_CHAN_2GHZ(chan)) {
311 pCalBChans = pEepData->calFreqPier2G;
312 numPiers = AR5416_NUM_2G_CAL_PIERS;
314 pCalBChans = pEepData->calFreqPier5G;
315 numPiers = AR5416_NUM_5G_CAL_PIERS;
318 /* If OLC is being done, set the init PDADC value appropriately */
319 if (IEEE80211_IS_CHAN_2GHZ(chan) && AR_SREV_MERLIN_20_OR_LATER(ah) &&
320 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) {
321 struct calDataPerFreq *pRawDataset = pEepData->calPierData2G[0];
322 AH5416(ah)->initPDADC = ((struct calDataPerFreqOpLoop *) pRawDataset)->vpdPdg[0][0];
325 * XXX ath9k doesn't clear this for 5ghz mode if
326 * it were set in 2ghz mode before!
327 * The Merlin OLC temperature compensation code
328 * uses this to calculate the PDADC delta during
329 * calibration ; 0 here effectively stops the
330 * temperature compensation calibration from
333 AH5416(ah)->initPDADC = 0;
336 /* Calculate the value of xpdgains from the xpdGain Mask */
337 numXpdGain = ar5416GetXpdGainValues(ah, xpdMask, xpdGainValues);
339 /* Write the detector gain biases and their number */
340 ar5416WriteDetectorGainBiases(ah, numXpdGain, xpdGainValues);
342 for (i = 0; i < AR5416_MAX_CHAINS; i++) {
343 regChainOffset = ar5416GetRegChainOffset(ah, i);
344 if (pEepData->baseEepHeader.txMask & (1 << i)) {
347 if (IEEE80211_IS_CHAN_2GHZ(chan)) {
348 pRawDataset = pEepData->calPierData2G[i];
350 pRawDataset = pEepData->calPierData5G[i];
353 /* Fetch the gain boundaries and the PDADC values */
354 if (AR_SREV_MERLIN_20_OR_LATER(ah) &&
355 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) {
359 ar9280olcGetTxGainIndex(ah, chan,
360 (struct calDataPerFreqOpLoop *) pRawDataset,
361 pCalBChans, numPiers, &txPower, &pcdacIdx);
362 ar9280olcGetPDADCs(ah, pcdacIdx, txPower / 2, pdadcValues);
364 ar5416GetGainBoundariesAndPdadcs(ah, chan,
365 pRawDataset, pCalBChans, numPiers,
366 pdGainOverlap_t2, &tMinCalPower,
367 gainBoundaries, pdadcValues, numXpdGain);
371 * Prior to writing the boundaries or the pdadc vs. power table
372 * into the chip registers the default starting point on the pdadc
373 * vs. power table needs to be checked and the curve boundaries
374 * adjusted accordingly
376 diff = ar9280ChangeGainBoundarySettings(ah,
377 gainBoundaries, numXpdGain, pdGainOverlap_t2,
378 pwr_table_offset, &diff);
380 if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) {
381 /* Set gain boundaries for either open- or closed-loop TPC */
382 if (AR_SREV_MERLIN_20_OR_LATER(ah) &&
383 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL))
384 ar9280SetGainBoundariesOpenLoop(ah,
388 ar5416SetGainBoundariesClosedLoop(ah,
394 * If this is a board that has a pwrTableOffset that differs from
395 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the
396 * pdadc vs pwr table needs to be adjusted prior to writing to the
399 ar9280AdjustPDADCValues(ah, pwr_table_offset, diff, pdadcValues);
401 /* Write the power values into the baseband power table */
402 ar5416WritePdadcValues(ah, i, pdadcValues);
405 *pTxPowerIndexOffset = 0;