2 * Defines for Cronyx-Tau adapter driver.
4 * Copyright (C) 1994-2003 Cronyx Engineering.
5 * Author: Serge Vakulenko, <vak@cronyx.ru>
7 * This software is distributed with NO WARRANTIES, not even the implied
8 * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
10 * Authors grant any other persons or organisations permission to use
11 * or modify this software as long as this message is kept with the software,
12 * all derivative works or modified versions.
14 * Cronyx Id: ctddk.h,v 1.1.2.3 2003/12/11 17:33:44 rik Exp $
17 #define NBRD 3 /* the maximum number of installed boards */
18 #define NPORT 32 /* the number of i/o ports per board */
19 #define NCHAN 2 /* the number of channels on the board */
20 #define NBUF 4 /* the number of buffers per direction */
21 #define DMABUFSZ 1600 /* buffer size */
25 # ifdef _M_ALPHA /* port address on Alpha under */
26 # define port_t unsigned long /* Windows NT is 32 bit long */
28 # define port_t unsigned short /* all other architectures */
29 # endif /* have 16-bit port addresses */
33 * There are tree models of Tau adapters.
34 * Each of two channels of the adapter is assigned a type:
37 * ------------------------------------------
38 * Tau T_SERIAL T_SERIAL
39 * Tau/E1 T_E1 T_E1_SERIAL
40 * Tau/G703 T_G703 T_G703_SERIAL
42 * Each channel could work in one of several modes:
45 * ------------------------------------------
46 * Tau M_ASYNC, M_ASYNC,
48 * ------------------------------------------
50 * M_E1 & CFG_D, M_E1 & CFG_D,
53 * ------------------------------------------
54 * Tau/G703 M_G703, M_G703,
57 * ------------------------------------------
59 #define B_TAU 0 /* Tau - basic model */
60 #define B_TAU_E1 1 /* Tau/E1 */
61 #define B_TAU_G703 2 /* Tau/G.703 */
62 #define B_TAU_E1C 3 /* Tau/E1 revision C */
63 #define B_TAU_E1D 4 /* Tau/E1 revision C with phony mode support */
64 #define B_TAU_G703C 5 /* Tau/G.703 revision C */
65 #define B_TAU2 6 /* Tau2 - basic model */
66 #define B_TAU2_E1 7 /* Tau2/E1 */
67 #define B_TAU2_E1D 8 /* Tau2/E1 with phony mode support */
68 #define B_TAU2_G703 9 /* Tau2/G.703 */
73 #define T_E1_SERIAL (T_E1 | T_SERIAL)
74 #define T_G703_SERIAL (T_G703 | T_SERIAL)
76 #define M_ASYNC 0 /* asynchronous mode */
77 #define M_HDLC 1 /* bit-sync mode (HDLC) */
86 /* E1/G.703 interfaces - i0, i1
87 * Digital interface - d0
91 * ---------------------------------------------------
92 * CFG_A | i0<->ct0 i1<->ct1
93 * ---------------------------------------------------
94 * CFG_B | i0<->ct0 d0<->ct1
99 * ---------------------------------------------------
100 * CFG_C | ct0<->i0<->ct1
105 * ---------------------------------------------------
106 * CFG_D | i0(e1)<->hdlc<->hdlc<->ct0(e1)
107 * ONLY TAU/E1 | i1(e1)<->hdlc<->hdlc<->ct1(e1)
112 * Mode register 0 (MD0) bits.
114 #define MD0_STOPB_1 0 /* 1 stop bit */
115 #define MD0_STOPB_15 1 /* 1.5 stop bits */
116 #define MD0_STOPB_2 2 /* 2 stop bits */
118 #define MD0_MODE_ASYNC 0 /* asynchronous mode */
119 #define MD0_MODE_EXTSYNC 3 /* external byte-sync mode */
120 #define MD0_MODE_HDLC 4 /* HDLC mode */
123 unsigned stopb : 2; /* stop bit length */
125 unsigned cts_rts_dcd : 1; /* auto-enable CTS/DCD/RTS */
126 unsigned mode : 3; /* protocol mode */
130 unsigned crcpre : 1; /* CRC preset 1s / 0s */
131 unsigned ccitt : 1; /* CRC-CCITT / CRC-16 */
132 unsigned crc : 1; /* CRC enable */
134 unsigned cts_dcd : 1; /* auto-enable CTS/DCD */
135 unsigned mode : 3; /* protocol mode */
139 * Mode register 1 (MD1) bits.
141 #define MD1_PAR_NO 0 /* no parity */
142 #define MD1_PAR_CMD 1 /* parity bit appended by command */
143 #define MD1_PAR_EVEN 2 /* even parity */
144 #define MD1_PAR_ODD 3 /* odd parity */
146 #define MD1_CLEN_8 0 /* 8 bits/character */
147 #define MD1_CLEN_7 1 /* 7 bits/character */
148 #define MD1_CLEN_6 2 /* 6 bits/character */
149 #define MD1_CLEN_5 3 /* 5 bits/character */
151 #define MD1_CLK_1 0 /* 1/1 clock rate */
152 #define MD1_CLK_16 1 /* 1/16 clock rate */
153 #define MD1_CLK_32 2 /* 1/32 clock rate */
154 #define MD1_CLK_64 3 /* 1/64 clock rate */
156 #define MD1_ADDR_NOCHK 0 /* do not check address field */
157 #define MD1_ADDR_SNGLE1 1 /* single address 1 */
158 #define MD1_ADDR_SNGLE2 2 /* single address 2 */
159 #define MD1_ADDR_DUAL 3 /* dual address */
162 unsigned parmode : 2; /* parity mode */
163 unsigned rxclen : 2; /* receive character length */
164 unsigned txclen : 2; /* transmit character length */
165 unsigned clk : 2; /* clock rate */
170 unsigned addr : 2; /* address field check */
174 * Mode register 2 (MD2) bits.
176 #define MD2_FDX 0 /* full duplex communication */
177 #define MD2_RLOOP 1 /* remote loopback (auto echo) */
178 #define MD2_LLOOP 3 /* local+remote loopback */
180 #define MD2_DPLL_CLK_8 0 /* x8 ADPLL clock rate */
181 #define MD2_DPLL_CLK_16 1 /* x16 ADPLL clock rate */
182 #define MD2_DPLL_CLK_32 2 /* x32 ADPLL clock rate */
184 #define MD2_ENCOD_NRZ 0 /* NRZ encoding */
185 #define MD2_ENCOD_NRZI 1 /* NRZI encoding */
186 #define MD2_ENCOD_MANCHESTER 4 /* Manchester encoding */
187 #define MD2_ENCOD_FM0 5 /* FM0 encoding */
188 #define MD2_ENCOD_FM1 6 /* FM1 encoding */
191 unsigned loop : 2; /* loopback mode */
193 unsigned dpll_clk : 2; /* ADPLL clock rate */
194 unsigned encod : 3; /* signal encoding NRZ/NRZI/etc. */
198 * DMA priority control register (PCR) values.
200 #define PCR_PRIO_0_1 0 /* priority c0r > c0t > c1r > c1t */
201 #define PCR_PRIO_1_0 1 /* priority c1r > c1t > c0r > c0t */
202 #define PCR_PRIO_RX_TX 2 /* priority c0r > c1r > c0t > c1t */
203 #define PCR_PRIO_TX_RX 3 /* priority c0t > c1t > c0r > c1r */
204 #define PCR_PRIO_ROTATE 4 /* rotation priority -c0r-c0t-c1r-c1t- */
207 unsigned prio : 3; /* priority of channels */
208 unsigned noshare : 1; /* 1 - chan holds the bus until end of data */
209 /* 0 - all channels share the bus hold */
210 unsigned release : 1; /* 1 - release the bus between transfers */
211 /* 0 - hold the bus until all transfers done */
214 typedef struct { /* hdlc channel options */
215 ct_md0_hdlc_t md0; /* mode register 0 */
216 ct_md1_hdlc_t md1; /* mode register 1 */
217 unsigned char ctl; /* control register */
218 unsigned char sa0; /* sync/address register 0 */
219 unsigned char sa1; /* sync/address register 1 */
220 unsigned char rxs; /* receive clock source */
221 unsigned char txs; /* transmit clock source */
225 ct_md2_t md2; /* mode register 2 */
226 unsigned char dma_rrc; /* DMA mode receive FIFO ready level */
227 unsigned char dma_trc0; /* DMA mode transmit FIFO empty mark */
228 unsigned char dma_trc1; /* DMA mode transmit FIFO full mark */
229 unsigned char pio_rrc; /* port i/o mode receive FIFO ready level */
230 unsigned char pio_trc0; /* port i/o transmit FIFO empty mark */
231 unsigned char pio_trc1; /* port i/o transmit FIFO full mark */
235 * Option CLK is valid for both E1 and G.703 models.
236 * Options RATE, PCE, TEST are for G.703 only.
238 #define GCLK_INT 0 /* internal transmit clock source */
239 #define GCLK_RCV 1 /* transmit clock source = receive */
240 #define GCLK_RCLKO 2 /* tclk = receive clock of another channel */
242 #define GTEST_DIS 0 /* test disabled, normal operation */
243 #define GTEST_0 1 /* test "all zeros" */
244 #define GTEST_1 2 /* test "all ones" */
245 #define GTEST_01 3 /* test "0/1" */
247 typedef struct { /* E1/G.703 channel options */
248 unsigned char hdb3; /* encoding HDB3/AMI */
249 unsigned char pce; /* precoder enable */
250 unsigned char test; /* test mode 0/1/01/disable */
251 unsigned char crc4; /* E1 CRC4 enable */
252 unsigned char cas; /* E1 signalling mode CAS/CCS */
253 unsigned char higain; /* E1 high gain amplifier (30 dB) */
254 unsigned char phony; /* E1 phony mode */
255 unsigned char pce2; /* old PCM2 precoder compatibility */
256 unsigned long rate; /* data rate 2048/1024/512/256/128/64 kbit/s */
257 unsigned short level; /* G.703 input signal level, -cB */
261 unsigned char bcr2; /* board control register 2 */
262 ct_pcr_t pcr; /* DMA priority control register */
263 unsigned char clk0; /* E1/G.703 chan 0 txclk src int/rcv/rclki */
264 unsigned char clk1; /* E1/G.703 chan 1 txclk src int/rcv/rclki */
265 unsigned char cfg; /* E1 configuration II/HI/K */
266 unsigned long s0; /* E1 channel 0 timeslot mask */
267 unsigned long s1; /* E1 channel 1 timeslot mask */
268 unsigned long s2; /* E1 subchannel pass-through timeslot mask */
272 * Board control register 2 bits.
274 #define BCR2_INVTXC0 0x10 /* channel 0 invert transmit clock */
275 #define BCR2_INVTXC1 0x20 /* channel 1 invert transmit clock */
276 #define BCR2_INVRXC0 0x40 /* channel 0 invert receive clock */
277 #define BCR2_INVRXC1 0x80 /* channel 1 invert receive clock */
279 #define BCR2_BUS_UNLIM 0x01 /* unlimited DMA master burst length */
280 #define BCR2_BUS_RFST 0x02 /* fast read cycle bus timing */
281 #define BCR2_BUS_WFST 0x04 /* fast write cycle bus timing */
284 * Receive/transmit clock source register (RXS/TXS) bits - from hdc64570.h.
286 #define CLK_MASK 0x70 /* RXC/TXC clock input mask */
287 #define CLK_LINE 0x00 /* RXC/TXC line input */
288 #define CLK_INT 0x40 /* internal baud rate generator */
290 #define CLK_RXS_LINE_NS 0x20 /* RXC line with noise suppression */
291 #define CLK_RXS_DPLL_INT 0x60 /* ADPLL based on internal BRG */
292 #define CLK_RXS_DPLL_LINE 0x70 /* ADPLL based on RXC line */
294 #define CLK_TXS_RECV 0x60 /* receive clock */
297 * Control register (CTL) bits - from hdc64570.h.
299 #define CTL_RTS_INV 0x01 /* RTS control bit (inverted) */
300 #define CTL_SYNCLD 0x04 /* load SYN characters */
301 #define CTL_BRK 0x08 /* async: send break */
302 #define CTL_IDLE_MARK 0 /* HDLC: when idle, transmit mark */
303 #define CTL_IDLE_PTRN 0x10 /* HDLC: when idle, transmit an idle pattern */
304 #define CTL_UDRN_ABORT 0 /* HDLC: on underrun - abort */
305 #define CTL_UDRN_FCS 0x20 /* HDLC: on underrun - send FCS/flag */
308 unsigned long bpv; /* bipolar violations */
309 unsigned long fse; /* frame sync errors */
310 unsigned long crce; /* CRC errors */
311 unsigned long rcrce; /* remote CRC errors (E-bit) */
312 unsigned long uas; /* unavailable seconds */
313 unsigned long les; /* line errored seconds */
314 unsigned long es; /* errored seconds */
315 unsigned long bes; /* bursty errored seconds */
316 unsigned long ses; /* severely errored seconds */
317 unsigned long oofs; /* out of frame seconds */
318 unsigned long css; /* controlled slip seconds */
319 unsigned long dm; /* degraded minutes */
322 #define ESTS_NOALARM 0x0001 /* no alarm present */
323 #define ESTS_FARLOF 0x0002 /* receiving far loss of framing */
324 #define ESTS_AIS 0x0008 /* receiving all ones */
325 #define ESTS_LOF 0x0020 /* loss of framing */
326 #define ESTS_LOS 0x0040 /* loss of signal */
327 #define ESTS_AIS16 0x0100 /* receiving all ones in timeslot 16 */
328 #define ESTS_FARLOMF 0x0200 /* receiving alarm in timeslot 16 */
329 #define ESTS_LOMF 0x0400 /* loss of multiframe sync */
330 #define ESTS_TSTREQ 0x0800 /* test code detected */
331 #define ESTS_TSTERR 0x1000 /* test error */
334 unsigned char data[10];
338 unsigned char tbuffer [NBUF] [DMABUFSZ]; /* transmit buffers */
339 unsigned char rbuffer [NBUF] [DMABUFSZ]; /* receive buffers */
340 ct_desc_t descbuf [4*NBUF]; /* descriptors */
341 /* double size for alignment */
344 #define B_NEXT(b) (*(unsigned short*)(b).data) /* next descriptor ptr */
345 #define B_PTR(b) (*(unsigned long*) ((b).data+2)) /* ptr to data buffer */
346 #define B_LEN(b) (*(unsigned short*)((b).data+6)) /* data buffer length */
347 #define B_STATUS(b) (*(unsigned short*)((b).data+8)) /* buf status, see FST */
350 port_t DAR, DARB, SAR, SARB, CDA, EDA, BFL, BCR, DSR,
351 DMR, FCT, DIR, DCR, TCNT, TCONR, TCSR, TEPR;
354 #ifdef NDIS_MINIPORT_DRIVER
355 typedef struct _ct_queue_t { /* packet queue */
356 PNDIS_WAN_PACKET head; /* first packet in queue */
357 PNDIS_WAN_PACKET tail; /* last packet in queue */
361 typedef struct _ct_chan_t {
362 port_t MD0, MD1, MD2, CTL, RXS, TXS, TMC, CMD, ST0,
363 ST1, ST2, ST3, FST, IE0, IE1, IE2, FIE, SA0,
364 SA1, IDL, TRB, RRC, TRC0, TRC1, CST;
365 ct_dmareg_t RX; /* RX DMA/timer registers */
366 ct_dmareg_t TX; /* TX DMA/timer registers */
368 unsigned char num; /* channel number, 0..1 */
369 struct _ct_board_t *board; /* board pointer */
370 unsigned long baud; /* data rate */
371 unsigned char type; /* channel type */
372 unsigned char mode; /* channel mode */
373 ct_chan_opt_t opt; /* common channel options */
374 ct_opt_hdlc_t hopt; /* hdlc mode options */
375 ct_opt_g703_t gopt; /* E1/G.703 options */
376 unsigned char dtr; /* DTR signal value */
377 unsigned char rts; /* RTS signal value */
378 unsigned char lx; /* LXT input bit settings */
380 unsigned char *tbuf [NBUF]; /* transmit buffer */
381 ct_desc_t *tdesc; /* transmit buffer descriptors */
382 unsigned long tphys [NBUF]; /* transmit buffer phys address */
383 unsigned long tdphys [NBUF]; /* transmit descr phys addresses */
384 int tn; /* first active transmit buffer */
385 int te; /* first active transmit buffer */
387 unsigned char *rbuf [NBUF]; /* receive buffers */
388 ct_desc_t *rdesc; /* receive buffer descriptors */
389 unsigned long rphys [NBUF]; /* receive buffer phys address */
390 unsigned long rdphys [NBUF]; /* receive descr phys addresses */
391 int rn; /* first active receive buffer */
393 unsigned long rintr; /* receive interrupts */
394 unsigned long tintr; /* transmit interrupts */
395 unsigned long mintr; /* modem interrupts */
396 unsigned long ibytes; /* input bytes */
397 unsigned long ipkts; /* input packets */
398 unsigned long ierrs; /* input errors */
399 unsigned long obytes; /* output bytes */
400 unsigned long opkts; /* output packets */
401 unsigned long oerrs; /* output errors */
403 unsigned short status; /* line status bit mask */
404 unsigned long totsec; /* total seconds elapsed */
405 unsigned long cursec; /* total seconds elapsed */
406 unsigned long degsec; /* degraded seconds */
407 unsigned long degerr; /* errors during degraded seconds */
408 ct_gstat_t currnt; /* current 15-min interval data */
409 ct_gstat_t total; /* total statistics data */
410 ct_gstat_t interval [48]; /* 12 hour period data */
412 void *attach [NBUF]; /* system dependent data per buffer */
413 void *sys; /* system dependent data per channel */
418 unsigned char *sccrx, *scctx; /* pointers to SCC rx and tx buffers */
419 int sccrx_empty, scctx_empty; /* flags : set when buffer is empty */
420 int sccrx_b, scctx_b; /* first byte in queue */
421 int sccrx_e, scctx_e; /* first free byte in queue */
423 /* pointers to callback functions */
424 void (*call_on_tx) (struct _ct_chan_t*, void*, int);
425 void (*call_on_rx) (struct _ct_chan_t*, char*, int);
426 void (*call_on_msig) (struct _ct_chan_t*);
427 void (*call_on_scc) (struct _ct_chan_t*);
428 void (*call_on_err) (struct _ct_chan_t*, int);
430 #ifdef NDIS_MINIPORT_DRIVER /* NDIS 3 - WinNT/Win95 */
431 HTAPI_LINE htline; /* TAPI line descriptor */
432 HTAPI_CALL htcall; /* TAPI call descriptor */
433 NDIS_HANDLE connect; /* WAN connection context */
434 ct_queue_t sendq; /* packets to transmit queue */
435 ct_queue_t busyq; /* transmit busy queue */
436 UINT state; /* line state mask */
437 int timo; /* state timeout counter */
441 typedef struct _ct_board_t {
442 port_t port; /* base board port, 200..3e0 */
443 unsigned short num; /* board number, 0..2 */
444 unsigned char irq; /* intterupt request {3 5 7 10 11 12 15} */
445 unsigned char dma; /* DMA request {5 6 7} */
446 unsigned long osc; /* oscillator frequency: 10MHz or 8.192 */
447 unsigned char type; /* board type Tau/TauE1/TauG703 */
448 char name[16]; /* board version name */
449 unsigned char bcr0; /* BCR0 image */
450 unsigned char bcr1; /* BCR1 image */
451 unsigned char bcr2; /* BCR2 image */
452 unsigned char gmd0; /* G.703 MD0 register image */
453 unsigned char gmd1; /* G.703 MD1 register image */
454 unsigned char gmd2; /* G.703 MD2 register image */
455 unsigned char e1cfg; /* E1 CFG register image */
456 unsigned char e1syn; /* E1 SYN register image */
457 ct_board_opt_t opt; /* board options */
458 ct_chan_t chan[NCHAN]; /* channel structures */
459 #ifdef NDIS_MINIPORT_DRIVER /* NDIS 3 - WinNT/Win95 */
460 PVOID ioaddr; /* mapped i/o port address */
461 NDIS_HANDLE mh; /* miniport adapter handler */
462 NDIS_MINIPORT_INTERRUPT irqh; /* interrupt handler */
463 NDIS_HANDLE dmah; /* dma channel handler */
464 ULONG bufsz; /* size of shared memory buffer */
465 PVOID buf; /* shared memory for adapter */
466 NDIS_PHYSICAL_ADDRESS bphys; /* shared memory phys address */
467 NDIS_SPIN_LOCK lock; /* lock descriptor */
468 ULONG debug; /* debug flags */
469 ULONG idbase; /* TAPI device identifier base number */
470 ULONG anum; /* adapter number, from inf setup script */
471 NDIS_MINIPORT_TIMER timer; /* periodic timer structure */
476 extern unsigned char ct_chan_mode;
478 extern ct_board_opt_t ct_board_opt_dflt; /* default board options */
479 extern ct_chan_opt_t ct_chan_opt_dflt; /* default channel options */
480 extern ct_opt_hdlc_t ct_opt_hdlc_dflt; /* default hdlc mode options */
481 extern ct_opt_g703_t ct_opt_g703_dflt; /* default E1/G.703 options */
484 int ct_probe_board (port_t port, int irq, int dma);
485 void ct_init (ct_board_t *b, int num, port_t port, int irq, int dma,
486 const unsigned char *firmware, long bits,
487 const struct _cr_dat_tst *tst, const unsigned char *firmware2);
488 void ct_init_board (ct_board_t *b, int num, port_t port, int irq, int dma,
490 int ct_download (port_t port, const unsigned char *firmware, long bits,
491 const struct _cr_dat_tst *tst);
492 int ct_download2 (port_t port, const unsigned char *firmware);
493 int ct_setup_board (ct_board_t *b, const unsigned char *firmware,
494 long bits, const struct _cr_dat_tst *tst);
495 void ct_setup_e1 (ct_board_t *b);
496 void ct_setup_g703 (ct_board_t *b);
497 void ct_setup_chan (ct_chan_t *c);
498 void ct_update_chan (ct_chan_t *c);
499 void ct_start_receiver (ct_chan_t *c, int dma, unsigned long buf1,
500 unsigned len, unsigned long buf, unsigned long lim);
501 void ct_start_transmitter (ct_chan_t *c, int dma, unsigned long buf1,
502 unsigned len, unsigned long buf, unsigned long lim);
503 void ct_set_dtr (ct_chan_t *c, int on);
504 void ct_set_rts (ct_chan_t *c, int on);
505 void ct_set_brk (ct_chan_t *c, int on);
506 void ct_led (ct_board_t *b, int on);
507 void ct_cmd (port_t base, int cmd);
508 void ct_disable_dma (ct_board_t *b);
509 void ct_reinit_board (ct_board_t *b);
510 void ct_reinit_chan (ct_chan_t *c);
511 int ct_get_dsr (ct_chan_t *c);
512 int ct_get_cd (ct_chan_t *c);
513 int ct_get_cts (ct_chan_t *c);
514 int ct_get_lq (ct_chan_t *c);
515 void ct_compute_clock (long hz, long baud, int *txbr, int *tmc);
516 unsigned char cte_in (port_t base, unsigned char reg);
517 void cte_out (port_t base, unsigned char reg, unsigned char val);
518 unsigned char cte_ins (port_t base, unsigned char reg,
520 unsigned char cte_in2 (port_t base, unsigned char reg);
521 void cte_out2 (port_t base, unsigned char reg, unsigned char val);
522 void ctg_outx (ct_chan_t *c, unsigned char reg, unsigned char val);
523 unsigned char ctg_inx (ct_chan_t *c, unsigned char reg);
524 unsigned char cte_in2d (ct_chan_t *c);
525 void cte_out2d (ct_chan_t *c, unsigned char val);
526 void cte_out2c (ct_chan_t *c, unsigned char val);
528 /* functions dealing with interrupt vector in DOS */
529 #if defined (MSDOS) || defined (__MSDOS__)
530 int ddk_int_alloc (int irq, void (*func)(), void *arg);
531 int ddk_int_restore (int irq);
534 int ct_probe_irq (ct_board_t *b, int irq);
535 void ct_int_handler (ct_board_t *b);
536 void ct_g703_timer (ct_chan_t *c);
542 #define CT_OVERFLOW 4
543 #define CT_UNDERRUN 5
544 #define CT_SCC_OVERRUN 6
545 #define CT_SCC_FRAME 7
546 #define CT_SCC_OVERFLOW 8
548 int ct_open_board (ct_board_t *b, int num, port_t port, int irq, int dma);
549 void ct_close_board (ct_board_t *b);
550 int ct_find (port_t *board_ports);
552 int ct_set_config (ct_board_t *b, int cfg);
553 int ct_set_clk (ct_chan_t *c, int clk);
554 int ct_set_ts (ct_chan_t *c, unsigned long ts);
555 int ct_set_subchan (ct_board_t *b, unsigned long ts);
556 int ct_set_higain (ct_chan_t *c, int on);
557 void ct_set_phony (ct_chan_t *c, int on);
559 #define ct_get_config(b) ((b)->opt.cfg)
560 #define ct_get_subchan(b) ((b)->opt.s2)
561 #define ct_get_higain(c) ((c)->gopt.higain)
562 #define ct_get_phony(c) ((c)->gopt.phony)
563 int ct_get_clk (ct_chan_t *c);
564 unsigned long ct_get_ts (ct_chan_t *c);
566 void ct_start_chan (ct_chan_t *c, ct_buf_t *cb, unsigned long phys);
567 void ct_enable_receive (ct_chan_t *c, int on);
568 void ct_enable_transmit (ct_chan_t *c, int on);
569 int ct_receive_enabled (ct_chan_t *c);
570 int ct_transmit_enabled (ct_chan_t *c);
572 void ct_set_baud (ct_chan_t *c, unsigned long baud);
573 unsigned long ct_get_baud (ct_chan_t *c);
575 void ct_set_dpll (ct_chan_t *c, int on);
576 int ct_get_dpll (ct_chan_t *c);
578 void ct_set_nrzi (ct_chan_t *c, int on);
579 int ct_get_nrzi (ct_chan_t *c);
581 void ct_set_loop (ct_chan_t *c, int on);
582 int ct_get_loop (ct_chan_t *c);
584 void ct_set_invtxc (ct_chan_t *c, int on);
585 int ct_get_invtxc (ct_chan_t *c);
586 void ct_set_invrxc (ct_chan_t *c, int on);
587 int ct_get_invrxc (ct_chan_t *c);
589 int ct_buf_free (ct_chan_t *c);
590 int ct_send_packet (ct_chan_t *c, unsigned char *data, int len,
593 void ct_start_scc (ct_chan_t *c, char *rxbuf, char * txbuf);
594 int sccrx_check (ct_chan_t *c);
595 int scc_read (ct_chan_t *c, unsigned char *d, int len);
596 int scc_write (ct_chan_t *c, unsigned char *d, int len);
597 int scc_read_byte (ct_chan_t *c);
598 int scc_write_byte (ct_chan_t *c, unsigned char b);
600 void ct_register_transmit (ct_chan_t *c,
601 void (*func) (ct_chan_t*, void *attachment, int len));
602 void ct_register_receive (ct_chan_t *c,
603 void (*func) (ct_chan_t*, char *data, int len));
604 void ct_register_error (ct_chan_t *c,
605 void (*func) (ct_chan_t *c, int data));
606 void ct_register_modem (ct_chan_t *c, void (*func) (ct_chan_t *c));
607 void ct_register_scc (ct_chan_t *c, void (*func) (ct_chan_t *c));