2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
37 * Pseudo-driver for internal NWAY support on DEC 21143 and workalike
38 * controllers. Technically we're abusing the miibus code to handle
39 * media selection and NWAY support here since there is no MII
40 * interface. However the logical operations are roughly the same,
41 * and the alternative is to create a fake MII interface in the driver,
42 * which is harder to do.
45 #include <sys/param.h>
46 #include <sys/systm.h>
47 #include <sys/kernel.h>
48 #include <sys/socket.h>
49 #include <sys/errno.h>
51 #include <sys/module.h>
52 #include <sys/mutex.h>
56 #include <net/if_arp.h>
57 #include <net/if_media.h>
59 #include <dev/mii/mii.h>
60 #include <dev/mii/miivar.h>
63 #include <machine/bus.h>
64 #include <machine/resource.h>
66 #include <dev/pci/pcivar.h>
68 #include <dev/dc/if_dcreg.h>
70 #include "miibus_if.h"
72 #define DC_SETBIT(sc, reg, x) \
73 CSR_WRITE_4(sc, reg, \
74 CSR_READ_4(sc, reg) | x)
76 #define DC_CLRBIT(sc, reg, x) \
77 CSR_WRITE_4(sc, reg, \
78 CSR_READ_4(sc, reg) & ~x)
80 #define MIIF_AUTOTIMEOUT 0x0004
83 * This is the subsystem ID for the built-in 21143 ethernet
84 * in several Compaq Presario systems. Apparently these are
85 * 10Mbps only, so we need to treat them specially.
87 #define COMPAQ_PRESARIO_ID 0xb0bb0e11
89 static int dcphy_probe(device_t);
90 static int dcphy_attach(device_t);
92 static device_method_t dcphy_methods[] = {
93 /* device interface */
94 DEVMETHOD(device_probe, dcphy_probe),
95 DEVMETHOD(device_attach, dcphy_attach),
96 DEVMETHOD(device_detach, mii_phy_detach),
97 DEVMETHOD(device_shutdown, bus_generic_shutdown),
101 static devclass_t dcphy_devclass;
103 static driver_t dcphy_driver = {
106 sizeof(struct mii_softc)
109 DRIVER_MODULE(dcphy, miibus, dcphy_driver, dcphy_devclass, 0, 0);
111 static int dcphy_service(struct mii_softc *, struct mii_data *, int);
112 static void dcphy_status(struct mii_softc *);
113 static void dcphy_reset(struct mii_softc *);
114 static int dcphy_auto(struct mii_softc *);
116 static const struct mii_phy_funcs dcphy_funcs = {
123 dcphy_probe(device_t dev)
125 struct mii_attach_args *ma;
127 ma = device_get_ivars(dev);
130 * The dc driver will report the 21143 vendor and device
131 * ID to let us know that it wants us to attach.
133 if (ma->mii_id1 != DC_VENDORID_DEC ||
134 ma->mii_id2 != DC_DEVICEID_21143)
137 device_set_desc(dev, "Intel 21143 NWAY media interface");
139 return (BUS_PROBE_DEFAULT);
143 dcphy_attach(device_t dev)
145 struct mii_softc *sc;
146 struct dc_softc *dc_sc;
149 sc = device_get_softc(dev);
151 mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE,
155 dc_sc = sc->mii_pdata->mii_ifp->if_softc;
156 CSR_WRITE_4(dc_sc, DC_10BTSTAT, 0);
157 CSR_WRITE_4(dc_sc, DC_10BTCTRL, 0);
159 brdev = device_get_parent(sc->mii_dev);
160 switch (pci_get_subdevice(brdev) << 16 | pci_get_subvendor(brdev)) {
161 case COMPAQ_PRESARIO_ID:
162 /* Example of how to only allow 10Mbps modes. */
163 sc->mii_capabilities = BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX;
166 if (dc_sc->dc_pmode == DC_PMODE_SIA)
167 sc->mii_capabilities =
168 BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX;
170 sc->mii_capabilities =
171 BMSR_ANEG | BMSR_100TXFDX | BMSR_100TXHDX |
172 BMSR_10TFDX | BMSR_10THDX;
176 sc->mii_capabilities &= sc->mii_capmask;
177 device_printf(dev, " ");
178 mii_phy_add_media(sc);
181 MIIBUS_MEDIAINIT(sc->mii_dev);
186 dcphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
188 struct dc_softc *dc_sc;
189 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
193 dc_sc = mii->mii_ifp->if_softc;
201 * If the interface is not up, don't do anything.
203 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
206 mii->mii_media_active = IFM_NONE;
207 mode = CSR_READ_4(dc_sc, DC_NETCFG);
208 mode &= ~(DC_NETCFG_FULLDUPLEX | DC_NETCFG_PORTSEL |
209 DC_NETCFG_PCS | DC_NETCFG_SCRAMBLER | DC_NETCFG_SPEEDSEL);
211 switch (IFM_SUBTYPE(ife->ifm_media)) {
214 (void)dcphy_auto(sc);
218 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
219 mode |= DC_NETCFG_PORTSEL | DC_NETCFG_PCS |
221 if ((ife->ifm_media & IFM_FDX) != 0)
222 mode |= DC_NETCFG_FULLDUPLEX;
224 mode &= ~DC_NETCFG_FULLDUPLEX;
225 CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
228 DC_CLRBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
229 DC_CLRBIT(dc_sc, DC_10BTCTRL, 0xFFFF);
230 if ((ife->ifm_media & IFM_FDX) != 0)
231 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3D);
233 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3F);
234 DC_SETBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
235 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
236 mode &= ~DC_NETCFG_PORTSEL;
237 mode |= DC_NETCFG_SPEEDSEL;
238 if ((ife->ifm_media & IFM_FDX) != 0)
239 mode |= DC_NETCFG_FULLDUPLEX;
241 mode &= ~DC_NETCFG_FULLDUPLEX;
242 CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
251 * Is the interface even up?
253 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
257 * Only used for autonegotiation.
259 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
262 reg = CSR_READ_4(dc_sc, DC_10BTSTAT);
263 if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
267 * Only retry autonegotiation every 5 seconds.
269 * Otherwise, fall through to calling dcphy_status()
270 * since real Intel 21143 chips don't show valid link
271 * status until autonegotiation is switched off, and
272 * that only happens in dcphy_status(). Without this,
273 * successful autonegotiation is never recognised on
276 if (++sc->mii_ticks <= 50)
285 /* Update the media status. */
288 /* Callback if something changed. */
289 mii_phy_update(sc, cmd);
294 dcphy_status(struct mii_softc *sc)
296 struct mii_data *mii = sc->mii_pdata;
298 struct dc_softc *dc_sc;
300 dc_sc = mii->mii_ifp->if_softc;
302 mii->mii_media_status = IFM_AVALID;
303 mii->mii_media_active = IFM_ETHER;
305 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
308 tstat = CSR_READ_4(dc_sc, DC_10BTSTAT);
309 if (!(tstat & DC_TSTAT_LS10) || !(tstat & DC_TSTAT_LS100))
310 mii->mii_media_status |= IFM_ACTIVE;
312 if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) {
313 /* Erg, still trying, I guess... */
314 if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) {
315 if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) &&
316 (tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE)
318 mii->mii_media_active |= IFM_NONE;
322 if (tstat & DC_TSTAT_LP_CAN_NWAY) {
323 anlpar = tstat >> 16;
324 if (anlpar & ANLPAR_TX_FD &&
325 sc->mii_capabilities & BMSR_100TXFDX)
326 mii->mii_media_active |= IFM_100_TX | IFM_FDX;
327 else if (anlpar & ANLPAR_T4 &&
328 sc->mii_capabilities & BMSR_100T4)
329 mii->mii_media_active |= IFM_100_T4 | IFM_HDX;
330 else if (anlpar & ANLPAR_TX &&
331 sc->mii_capabilities & BMSR_100TXHDX)
332 mii->mii_media_active |= IFM_100_TX | IFM_HDX;
333 else if (anlpar & ANLPAR_10_FD)
334 mii->mii_media_active |= IFM_10_T | IFM_FDX;
335 else if (anlpar & ANLPAR_10)
336 mii->mii_media_active |= IFM_10_T | IFM_HDX;
338 mii->mii_media_active |= IFM_NONE;
339 if (DC_IS_INTEL(dc_sc))
340 DC_CLRBIT(dc_sc, DC_10BTCTRL,
341 DC_TCTL_AUTONEGENBL);
346 * If the other side doesn't support NWAY, then the
347 * best we can do is determine if we have a 10Mbps or
348 * 100Mbps link. There's no way to know if the link
349 * is full or half duplex, so we default to half duplex
350 * and hope that the user is clever enough to manually
351 * change the media settings if we're wrong.
353 if (!(tstat & DC_TSTAT_LS100))
354 mii->mii_media_active |= IFM_100_TX | IFM_HDX;
355 else if (!(tstat & DC_TSTAT_LS10))
356 mii->mii_media_active |= IFM_10_T | IFM_HDX;
358 mii->mii_media_active |= IFM_NONE;
359 if (DC_IS_INTEL(dc_sc))
360 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
365 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_SPEEDSEL)
366 mii->mii_media_active |= IFM_10_T;
368 mii->mii_media_active |= IFM_100_TX;
369 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_FULLDUPLEX)
370 mii->mii_media_active |= IFM_FDX;
372 mii->mii_media_active |= IFM_HDX;
376 dcphy_auto(struct mii_softc *mii)
380 sc = mii->mii_pdata->mii_ifp->if_softc;
382 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
383 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
384 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
385 if (mii->mii_capabilities & BMSR_100TXHDX)
386 CSR_WRITE_4(sc, DC_10BTCTRL, 0x3FFFF);
388 CSR_WRITE_4(sc, DC_10BTCTRL, 0xFFFF);
389 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
390 DC_SETBIT(sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
391 DC_SETBIT(sc, DC_10BTSTAT, DC_ASTAT_TXDISABLE);
393 return (EJUSTRETURN);
397 dcphy_reset(struct mii_softc *mii)
401 sc = mii->mii_pdata->mii_ifp->if_softc;
403 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
405 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);