2 * Copyright (c) 2006 IronPort Systems
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * Copyright (c) 2007 LSI Corp.
28 * Copyright (c) 2007 Rajesh Prabhakaran.
29 * All rights reserved.
31 * Redistribution and use in source and binary forms, with or without
32 * modification, are permitted provided that the following conditions
34 * 1. Redistributions of source code must retain the above copyright
35 * notice, this list of conditions and the following disclaimer.
36 * 2. Redistributions in binary form must reproduce the above copyright
37 * notice, this list of conditions and the following disclaimer in the
38 * documentation and/or other materials provided with the distribution.
40 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
41 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
42 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
43 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
44 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
45 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
46 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
47 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
48 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
49 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
56 #include <sys/cdefs.h>
57 __FBSDID("$FreeBSD$");
60 * MegaRAID SAS MFI firmware definitions
62 * Calling this driver 'MegaRAID SAS' is a bit misleading. It's a completely
63 * new firmware interface from the old AMI MegaRAID one, and there is no
64 * reason why this interface should be limited to just SAS. In any case, LSI
65 * seems to also call this interface 'MFI', so that will be used here.
67 #define MEGAMFI_FRAME_SIZE 64
69 * Start with the register set. All registers are 32 bits wide.
70 * The usual Intel IOP style setup.
72 #define MFI_IMSG0 0x10 /* Inbound message 0 */
73 #define MFI_IMSG1 0x14 /* Inbound message 1 */
74 #define MFI_OMSG0 0x18 /* Outbound message 0 */
75 #define MFI_OMSG1 0x1c /* Outbound message 1 */
76 #define MFI_IDB 0x20 /* Inbound doorbell */
77 #define MFI_ISTS 0x24 /* Inbound interrupt status */
78 #define MFI_IMSK 0x28 /* Inbound interrupt mask */
79 #define MFI_ODB 0x2c /* Outbound doorbell */
80 #define MFI_OSTS 0x30 /* Outbound interrupt status */
81 #define MFI_OMSK 0x34 /* Outbound interrupt mask */
82 #define MFI_IQP 0x40 /* Inbound queue port */
83 #define MFI_OQP 0x44 /* Outbound queue port */
86 * ThunderBolt specific Register
89 #define MFI_RFPI 0x48 /* reply_free_post_host_index */
90 #define MFI_RPI 0x6c /* reply_post_host_index */
91 #define MFI_ILQP 0xc0 /* inbound_low_queue_port */
92 #define MFI_IHQP 0xc4 /* inbound_high_queue_port */
95 * 1078 specific related register
97 #define MFI_ODR0 0x9c /* outbound doorbell register0 */
98 #define MFI_ODCR0 0xa0 /* outbound doorbell clear register0 */
99 #define MFI_OSP0 0xb0 /* outbound scratch pad0 */
100 #define MFI_1078_EIM 0x80000004 /* 1078 enable intrrupt mask */
101 #define MFI_RMI 0x2 /* reply message interrupt */
102 #define MFI_1078_RM 0x80000000 /* reply 1078 message interrupt */
103 #define MFI_ODC 0x4 /* outbound doorbell change interrupt */
106 #define MFI_WSR 0x004 /* write sequence register */
107 #define MFI_HDR 0x008 /* host diagnostic register */
108 #define MFI_RSR 0x3c3 /* Reset Status Register */
111 * GEN2 specific changes
113 #define MFI_GEN2_EIM 0x00000005 /* GEN2 enable interrupt mask */
114 #define MFI_GEN2_RM 0x00000001 /* reply GEN2 message interrupt */
117 * skinny specific changes
119 #define MFI_SKINNY_IDB 0x00 /* Inbound doorbell is at 0x00 for skinny */
120 #define MFI_IQPL 0x000000c0
121 #define MFI_IQPH 0x000000c4
122 #define MFI_SKINNY_RM 0x00000001 /* reply skinny message interrupt */
124 /* Bits for MFI_OSTS */
125 #define MFI_OSTS_INTR_VALID 0x00000002
127 /* OCR specific flags */
128 #define MFI_FIRMWARE_STATE_CHANGE 0x00000002
129 #define MFI_STATE_CHANGE_INTERRUPT 0x00000004 /* MFI state change interrrupt */
132 * Firmware state values. Found in OMSG0 during initialization.
134 #define MFI_FWSTATE_MASK 0xf0000000
135 #define MFI_FWSTATE_UNDEFINED 0x00000000
136 #define MFI_FWSTATE_BB_INIT 0x10000000
137 #define MFI_FWSTATE_FW_INIT 0x40000000
138 #define MFI_FWSTATE_WAIT_HANDSHAKE 0x60000000
139 #define MFI_FWSTATE_FW_INIT_2 0x70000000
140 #define MFI_FWSTATE_DEVICE_SCAN 0x80000000
141 #define MFI_FWSTATE_BOOT_MESSAGE_PENDING 0x90000000
142 #define MFI_FWSTATE_FLUSH_CACHE 0xa0000000
143 #define MFI_FWSTATE_READY 0xb0000000
144 #define MFI_FWSTATE_OPERATIONAL 0xc0000000
145 #define MFI_FWSTATE_FAULT 0xf0000000
146 #define MFI_FWSTATE_MAXSGL_MASK 0x00ff0000
147 #define MFI_FWSTATE_MAXCMD_MASK 0x0000ffff
148 #define MFI_FWSTATE_HOSTMEMREQD_MASK 0x08000000
149 #define MFI_FWSTATE_BOOT_MESSAGE_PENDING 0x90000000
150 #define MFI_RESET_REQUIRED 0x00000001
152 /* ThunderBolt Support */
153 #define MFI_FWSTATE_TB_MASK 0xf0000000
154 #define MFI_FWSTATE_TB_RESET 0x00000000
155 #define MFI_FWSTATE_TB_READY 0x10000000
156 #define MFI_FWSTATE_TB_OPERATIONAL 0x20000000
157 #define MFI_FWSTATE_TB_FAULT 0x40000000
160 * Control bits to drive the card to ready state. These go into the IDB
163 #define MFI_FWINIT_ABORT 0x00000000 /* Abort all pending commands */
164 #define MFI_FWINIT_READY 0x00000002 /* Move from operational to ready */
165 #define MFI_FWINIT_MFIMODE 0x00000004 /* unknown */
166 #define MFI_FWINIT_CLEAR_HANDSHAKE 0x00000008 /* Respond to WAIT_HANDSHAKE */
167 #define MFI_FWINIT_HOTPLUG 0x00000010
169 /* ADP reset flags */
170 #define MFI_STOP_ADP 0x00000020
171 #define MFI_ADP_RESET 0x00000040
172 #define DIAG_WRITE_ENABLE 0x00000080
173 #define DIAG_RESET_ADAPTER 0x00000004
188 /* Direct commands */
190 MFI_DCMD_CTRL_GETINFO = 0x01010000,
191 MFI_DCMD_CTRL_MFI_HOST_MEM_ALLOC =0x0100e100,
192 MFI_DCMD_CTRL_MFC_DEFAULTS_GET =0x010e0201,
193 MFI_DCMD_CTRL_MFC_DEFAULTS_SET =0x010e0202,
194 MFI_DCMD_CTRL_FLUSHCACHE = 0x01101000,
195 MFI_DCMD_CTRL_SHUTDOWN = 0x01050000,
196 MFI_DCMD_CTRL_EVENT_GETINFO = 0x01040100,
197 MFI_DCMD_CTRL_EVENT_GET = 0x01040300,
198 MFI_DCMD_CTRL_EVENT_WAIT = 0x01040500,
199 MFI_DCMD_PR_GET_STATUS = 0x01070100,
200 MFI_DCMD_PR_GET_PROPERTIES = 0x01070200,
201 MFI_DCMD_PR_SET_PROPERTIES = 0x01070300,
202 MFI_DCMD_PR_START = 0x01070400,
203 MFI_DCMD_PR_STOP = 0x01070500,
204 MFI_DCMD_TIME_SECS_GET = 0x01080201,
205 MFI_DCMD_FLASH_FW_OPEN = 0x010f0100,
206 MFI_DCMD_FLASH_FW_DOWNLOAD = 0x010f0200,
207 MFI_DCMD_FLASH_FW_FLASH = 0x010f0300,
208 MFI_DCMD_FLASH_FW_CLOSE = 0x010f0400,
209 MFI_DCMD_PD_GET_LIST = 0x02010000,
210 MFI_DCMD_PD_LIST_QUERY = 0x02010100,
211 MFI_DCMD_PD_GET_INFO = 0x02020000,
212 MFI_DCMD_PD_STATE_SET = 0x02030100,
213 MFI_DCMD_PD_REBUILD_START = 0x02040100,
214 MFI_DCMD_PD_REBUILD_ABORT = 0x02040200,
215 MFI_DCMD_PD_CLEAR_START = 0x02050100,
216 MFI_DCMD_PD_CLEAR_ABORT = 0x02050200,
217 MFI_DCMD_PD_GET_PROGRESS = 0x02060000,
218 MFI_DCMD_PD_LOCATE_START = 0x02070100,
219 MFI_DCMD_PD_LOCATE_STOP = 0x02070200,
220 MFI_DCMD_LD_MAP_GET_INFO = 0x0300e101,
221 MFI_DCMD_LD_SYNC = 0x0300e102,
222 MFI_DCMD_LD_GET_LIST = 0x03010000,
223 MFI_DCMD_LD_GET_INFO = 0x03020000,
224 MFI_DCMD_LD_GET_PROP = 0x03030000,
225 MFI_DCMD_LD_SET_PROP = 0x03040000,
226 MFI_DCMD_LD_INIT_START = 0x03060100,
227 MFI_DCMD_LD_DELETE = 0x03090000,
228 MFI_DCMD_CFG_READ = 0x04010000,
229 MFI_DCMD_CFG_ADD = 0x04020000,
230 MFI_DCMD_CFG_CLEAR = 0x04030000,
231 MFI_DCMD_CFG_MAKE_SPARE = 0x04040000,
232 MFI_DCMD_CFG_REMOVE_SPARE = 0x04050000,
233 MFI_DCMD_CFG_FOREIGN_SCAN = 0x04060100,
234 MFI_DCMD_CFG_FOREIGN_DISPLAY = 0x04060200,
235 MFI_DCMD_CFG_FOREIGN_PREVIEW = 0x04060300,
236 MFI_DCMD_CFG_FOREIGN_IMPORT = 0x04060400,
237 MFI_DCMD_CFG_FOREIGN_CLEAR = 0x04060500,
238 MFI_DCMD_BBU_GET_STATUS = 0x05010000,
239 MFI_DCMD_BBU_GET_CAPACITY_INFO =0x05020000,
240 MFI_DCMD_BBU_GET_DESIGN_INFO = 0x05030000,
241 MFI_DCMD_BBU_START_LEARN = 0x05040000,
242 MFI_DCMD_BBU_GET_PROP = 0x05050100,
243 MFI_DCMD_BBU_SET_PROP = 0x05050200,
244 MFI_DCMD_CLUSTER = 0x08000000,
245 MFI_DCMD_CLUSTER_RESET_ALL = 0x08010100,
246 MFI_DCMD_CLUSTER_RESET_LD = 0x08010200
249 /* Modifiers for MFI_DCMD_CTRL_FLUSHCACHE */
250 #define MFI_FLUSHCACHE_CTRL 0x01
251 #define MFI_FLUSHCACHE_DISK 0x02
253 /* Modifiers for MFI_DCMD_CTRL_SHUTDOWN */
254 #define MFI_SHUTDOWN_SPINDOWN 0x01
259 #define MFI_FRAME_POST_IN_REPLY_QUEUE 0x0000
260 #define MFI_FRAME_DONT_POST_IN_REPLY_QUEUE 0x0001
261 #define MFI_FRAME_SGL32 0x0000
262 #define MFI_FRAME_SGL64 0x0002
263 #define MFI_FRAME_SENSE32 0x0000
264 #define MFI_FRAME_SENSE64 0x0004
265 #define MFI_FRAME_DIR_NONE 0x0000
266 #define MFI_FRAME_DIR_WRITE 0x0008
267 #define MFI_FRAME_DIR_READ 0x0010
268 #define MFI_FRAME_DIR_BOTH 0x0018
269 #define MFI_FRAME_IEEE_SGL 0x0020
270 #define MFI_FRAME_FMT "\20" \
278 /* ThunderBolt Specific */
281 * Pre-TB command size and TB command size.
282 * We will be checking it at the load time for the time being
284 #define MR_COMMAND_SIZE (MFI_FRAME_SIZE*20) /* 1280 bytes */
286 #define MEGASAS_THUNDERBOLT_MSG_ALLIGNMENT 256
288 * We are defining only 128 byte message to reduce memory move over head
289 * and also it will reduce the SRB extension size by 128byte compared with
292 #define MEGASAS_THUNDERBOLT_NEW_MSG_SIZE 256
293 #define MEGASAS_THUNDERBOLT_MAX_COMMANDS 1024
294 #define MEGASAS_THUNDERBOLT_MAX_REPLY_COUNT 1024
295 #define MEGASAS_THUNDERBOLT_REPLY_SIZE 8
296 #define MEGASAS_THUNDERBOLT_MAX_CHAIN_COUNT 1
297 #define MEGASAS_MAX_SZ_CHAIN_FRAME 1024
299 #define MPI2_FUNCTION_PASSTHRU_IO_REQUEST 0xF0
300 #define MPI2_FUNCTION_LD_IO_REQUEST 0xF1
302 #define MR_INTERNAL_MFI_FRAMES_SMID 1
303 #define MR_CTRL_EVENT_WAIT_SMID 2
304 #define MR_INTERNAL_DRIVER_RESET_SMID 3
307 /* MFI Status codes */
310 MFI_STAT_INVALID_CMD,
311 MFI_STAT_INVALID_DCMD,
312 MFI_STAT_INVALID_PARAMETER,
313 MFI_STAT_INVALID_SEQUENCE_NUMBER,
314 MFI_STAT_ABORT_NOT_POSSIBLE,
315 MFI_STAT_APP_HOST_CODE_NOT_FOUND,
317 MFI_STAT_APP_NOT_INITIALIZED,
318 MFI_STAT_ARRAY_INDEX_INVALID,
319 MFI_STAT_ARRAY_ROW_NOT_EMPTY,
320 MFI_STAT_CONFIG_RESOURCE_CONFLICT,
321 MFI_STAT_DEVICE_NOT_FOUND,
322 MFI_STAT_DRIVE_TOO_SMALL,
323 MFI_STAT_FLASH_ALLOC_FAIL,
325 MFI_STAT_FLASH_ERROR = 0x10,
326 MFI_STAT_FLASH_IMAGE_BAD,
327 MFI_STAT_FLASH_IMAGE_INCOMPLETE,
328 MFI_STAT_FLASH_NOT_OPEN,
329 MFI_STAT_FLASH_NOT_STARTED,
330 MFI_STAT_FLUSH_FAILED,
331 MFI_STAT_HOST_CODE_NOT_FOUNT,
332 MFI_STAT_LD_CC_IN_PROGRESS,
333 MFI_STAT_LD_INIT_IN_PROGRESS,
334 MFI_STAT_LD_LBA_OUT_OF_RANGE,
335 MFI_STAT_LD_MAX_CONFIGURED,
336 MFI_STAT_LD_NOT_OPTIMAL,
337 MFI_STAT_LD_RBLD_IN_PROGRESS,
338 MFI_STAT_LD_RECON_IN_PROGRESS,
339 MFI_STAT_LD_WRONG_RAID_LEVEL,
340 MFI_STAT_MAX_SPARES_EXCEEDED,
341 MFI_STAT_MEMORY_NOT_AVAILABLE = 0x20,
342 MFI_STAT_MFC_HW_ERROR,
343 MFI_STAT_NO_HW_PRESENT,
345 MFI_STAT_NOT_IN_ENCL,
346 MFI_STAT_PD_CLEAR_IN_PROGRESS,
347 MFI_STAT_PD_TYPE_WRONG,
348 MFI_STAT_PR_DISABLED,
349 MFI_STAT_ROW_INDEX_INVALID,
350 MFI_STAT_SAS_CONFIG_INVALID_ACTION,
351 MFI_STAT_SAS_CONFIG_INVALID_DATA,
352 MFI_STAT_SAS_CONFIG_INVALID_PAGE,
353 MFI_STAT_SAS_CONFIG_INVALID_TYPE,
354 MFI_STAT_SCSI_DONE_WITH_ERROR,
355 MFI_STAT_SCSI_IO_FAILED,
356 MFI_STAT_SCSI_RESERVATION_CONFLICT,
357 MFI_STAT_SHUTDOWN_FAILED = 0x30,
358 MFI_STAT_TIME_NOT_SET,
359 MFI_STAT_WRONG_STATE,
361 MFI_STAT_PEER_NOTIFICATION_REJECTED,
362 MFI_STAT_PEER_NOTIFICATION_FAILED,
363 MFI_STAT_RESERVATION_IN_PROGRESS,
364 MFI_STAT_I2C_ERRORS_DETECTED,
365 MFI_STAT_PCI_ERRORS_DETECTED,
366 MFI_STAT_DIAG_FAILED,
367 MFI_STAT_BOOT_MSG_PENDING,
368 MFI_STAT_FOREIGN_CONFIG_INCOMPLETE,
369 MFI_STAT_INVALID_STATUS = 0xFF
373 MFI_EVT_CLASS_DEBUG = -2,
374 MFI_EVT_CLASS_PROGRESS = -1,
375 MFI_EVT_CLASS_INFO = 0,
376 MFI_EVT_CLASS_WARNING = 1,
377 MFI_EVT_CLASS_CRITICAL = 2,
378 MFI_EVT_CLASS_FATAL = 3,
379 MFI_EVT_CLASS_DEAD = 4
383 MFI_EVT_LOCALE_LD = 0x0001,
384 MFI_EVT_LOCALE_PD = 0x0002,
385 MFI_EVT_LOCALE_ENCL = 0x0004,
386 MFI_EVT_LOCALE_BBU = 0x0008,
387 MFI_EVT_LOCALE_SAS = 0x0010,
388 MFI_EVT_LOCALE_CTRL = 0x0020,
389 MFI_EVT_LOCALE_CONFIG = 0x0040,
390 MFI_EVT_LOCALE_CLUSTER = 0x0080,
391 MFI_EVT_LOCALE_ALL = 0xffff
395 MR_EVT_ARGS_NONE = 0x00,
396 MR_EVT_ARGS_CDB_SENSE,
398 MR_EVT_ARGS_LD_COUNT,
400 MR_EVT_ARGS_LD_OWNER,
401 MR_EVT_ARGS_LD_LBA_PD_LBA,
403 MR_EVT_ARGS_LD_STATE,
404 MR_EVT_ARGS_LD_STRIP,
408 MR_EVT_ARGS_PD_LBA_LD,
410 MR_EVT_ARGS_PD_STATE,
418 #define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED 0x0152
419 #define MR_EVT_PD_REMOVED 0x0070
420 #define MR_EVT_PD_INSERTED 0x005b
421 #define MR_EVT_LD_CHANGE 0x0051
424 MR_LD_CACHE_WRITE_BACK = 0x01,
425 MR_LD_CACHE_WRITE_ADAPTIVE = 0x02,
426 MR_LD_CACHE_READ_AHEAD = 0x04,
427 MR_LD_CACHE_READ_ADAPTIVE = 0x08,
428 MR_LD_CACHE_WRITE_CACHE_BAD_BBU=0x10,
429 MR_LD_CACHE_ALLOW_WRITE_CACHE = 0x20,
430 MR_LD_CACHE_ALLOW_READ_CACHE = 0x40
432 #define MR_LD_CACHE_MASK 0x7f
434 #define MR_LD_CACHE_POLICY_READ_AHEAD_NONE 0
435 #define MR_LD_CACHE_POLICY_READ_AHEAD_ALWAYS MR_LD_CACHE_READ_AHEAD
436 #define MR_LD_CACHE_POLICY_READ_AHEAD_ADAPTIVE \
437 (MR_LD_CACHE_READ_AHEAD | MR_LD_CACHE_READ_ADAPTIVE)
438 #define MR_LD_CACHE_POLICY_WRITE_THROUGH 0
439 #define MR_LD_CACHE_POLICY_WRITE_BACK MR_LD_CACHE_WRITE_BACK
440 #define MR_LD_CACHE_POLICY_IO_CACHED \
441 (MR_LD_CACHE_ALLOW_WRITE_CACHE | MR_LD_CACHE_ALLOW_READ_CACHE)
442 #define MR_LD_CACHE_POLICY_IO_DIRECT 0
445 MR_PD_CACHE_UNCHANGED = 0,
446 MR_PD_CACHE_ENABLE = 1,
447 MR_PD_CACHE_DISABLE = 2
451 MR_PD_QUERY_TYPE_ALL = 0,
452 MR_PD_QUERY_TYPE_STATE = 1,
453 MR_PD_QUERY_TYPE_POWER_STATE = 2,
454 MR_PD_QUERY_TYPE_MEDIA_TYPE = 3,
455 MR_PD_QUERY_TYPE_SPEED = 4,
456 MR_PD_QUERY_TYPE_EXPOSED_TO_HOST = 5 /*query for system drives */
460 * Other propertities and definitions
462 #define MFI_MAX_PD_CHANNELS 2
463 #define MFI_MAX_LD_CHANNELS 2
464 #define MFI_MAX_CHANNELS (MFI_MAX_PD_CHANNELS + MFI_MAX_LD_CHANNELS)
465 #define MFI_MAX_CHANNEL_DEVS 128
466 #define MFI_DEFAULT_ID -1
467 #define MFI_MAX_LUN 8
468 #define MFI_MAX_LD 64
469 #define MFI_MAX_PD 256
471 #define MFI_FRAME_SIZE 64
472 #define MFI_MBOX_SIZE 12
474 /* Firmware flashing can take 50+ seconds */
475 #define MFI_POLL_TIMEOUT_SECS 60
477 /* Allow for speedier math calculations */
478 #define MFI_SECTOR_LEN 512
480 /* Scatter Gather elements */
491 struct mfi_sg_skinny {
498 struct mfi_sg32 sg32[1];
499 struct mfi_sg64 sg64[1];
500 struct mfi_sg_skinny sg_skinny[1];
503 /* Message frames. All messages have a common header */
504 struct mfi_frame_header {
515 * pad0 is MSI Specific. Not used by Driver. Zero the value before
516 * sending the command to f/w.
520 #define MFI_FRAME_DATAOUT 0x08
521 #define MFI_FRAME_DATAIN 0x10
526 struct mfi_init_frame {
527 struct mfi_frame_header header;
528 uint32_t qinfo_new_addr_lo;
529 uint32_t qinfo_new_addr_hi;
530 uint32_t qinfo_old_addr_lo;
531 uint32_t qinfo_old_addr_hi;
532 // Start LSIP200113393
533 uint32_t driver_ver_lo; /*28h */
534 uint32_t driver_ver_hi; /*2Ch */
536 uint32_t reserved[4];
541 * Define MFI Address Context union.
543 #ifdef MFI_ADDRESS_IS_uint64_t
544 typedef uint64_t MFI_ADDRESS;
546 typedef union _MFI_ADDRESS {
549 uint32_t addressHigh;
552 } MFI_ADDRESS, *PMFI_ADDRESS;
555 #define MFI_IO_FRAME_SIZE 40
556 struct mfi_io_frame {
557 struct mfi_frame_header header;
558 uint32_t sense_addr_lo;
559 uint32_t sense_addr_hi;
565 #define MFI_PASS_FRAME_SIZE 48
566 struct mfi_pass_frame {
567 struct mfi_frame_header header;
568 uint32_t sense_addr_lo;
569 uint32_t sense_addr_hi;
574 #define MFI_DCMD_FRAME_SIZE 40
575 struct mfi_dcmd_frame {
576 struct mfi_frame_header header;
578 uint8_t mbox[MFI_MBOX_SIZE];
582 struct mfi_abort_frame {
583 struct mfi_frame_header header;
584 uint32_t abort_context;
585 /* pad is changed to reserved.*/
587 uint32_t abort_mfi_addr_lo;
588 uint32_t abort_mfi_addr_hi;
589 uint32_t reserved1[6];
592 struct mfi_smp_frame {
593 struct mfi_frame_header header;
596 struct mfi_sg32 sg32[2];
597 struct mfi_sg64 sg64[2];
601 struct mfi_stp_frame {
602 struct mfi_frame_header header;
606 struct mfi_sg32 sg32[2];
607 struct mfi_sg64 sg64[2];
612 struct mfi_frame_header header;
613 struct mfi_init_frame init;
614 /* ThunderBolt Initialization */
615 struct mfi_io_frame io;
616 struct mfi_pass_frame pass;
617 struct mfi_dcmd_frame dcmd;
618 struct mfi_abort_frame abort;
619 struct mfi_smp_frame smp;
620 struct mfi_stp_frame stp;
621 uint8_t bytes[MFI_FRAME_SIZE];
624 #define MFI_SENSE_LEN 128
626 uint8_t data[MFI_SENSE_LEN];
629 /* The queue init structure that is passed with the init message */
630 struct mfi_init_qinfo {
641 /* SAS (?) controller properties, part of mfi_ctrl_info */
642 struct mfi_ctrl_props {
644 uint16_t pred_fail_poll_interval;
645 uint16_t intr_throttle_cnt;
646 uint16_t intr_throttle_timeout;
647 uint8_t rebuild_rate;
648 uint8_t patrol_read_rate;
652 uint8_t cache_flush_interval;
653 uint8_t spinup_drv_cnt;
654 uint8_t spinup_delay;
655 uint8_t cluster_enable;
656 uint8_t coercion_mode;
657 uint8_t alarm_enable;
658 uint8_t disable_auto_rebuild;
659 uint8_t disable_battery_warn;
660 uint8_t ecc_bucket_size;
661 uint16_t ecc_bucket_leak_rate;
662 uint8_t restore_hotspare_on_insertion;
663 uint8_t expose_encl_devices;
664 uint8_t maintainPdFailHistory;
665 uint8_t disallowHostRequestReordering;
666 /* set TRUE to abort CC on detecting an inconsistency */
667 uint8_t abortCCOnError;
668 /* load balance mode (MR_LOAD_BALANCE_MODE) */
669 uint8_t loadBalanceMode;
671 * 0 - use auto detect logic of backplanes like SGPIO, i2c SEP using
672 * h/w mechansim like GPIO pins
673 * 1 - disable auto detect SGPIO,
674 * 2 - disable i2c SEP auto detect
675 * 3 - disable both auto detect
677 uint8_t disableAutoDetectBackplane;
679 * % of source LD to be reserved for a VDs snapshot in snapshot
680 * repository, for metadata and user data: 1=5%, 2=10%, 3=15% and so on
685 * Add properties that can be controlled by a bit in the following
689 /* set TRUE to disable copyBack (0=copback enabled) */
690 uint32_t copyBackDisabled :1;
691 uint32_t SMARTerEnabled :1;
692 uint32_t prCorrectUnconfiguredAreas :1;
693 uint32_t useFdeOnly :1;
694 uint32_t disableNCQ :1;
695 uint32_t SSDSMARTerEnabled :1;
696 uint32_t SSDPatrolReadEnabled :1;
697 uint32_t enableSpinDownUnconfigured :1;
698 uint32_t autoEnhancedImport :1;
699 uint32_t enableSecretKeyControl :1;
700 uint32_t disableOnlineCtrlReset :1;
701 uint32_t allowBootWithPinnedCache :1;
702 uint32_t disableSpinDownHS :1;
703 uint32_t enableJBOD :1;
704 uint32_t reserved :18;
707 * % of source LD to be reserved for auto snapshot in snapshot
708 * repository, for metadata and user data: 1=5%, 2=10%, 3=15% and so on.
710 uint8_t autoSnapVDSpace;
712 * Snapshot writeable VIEWs capacity as a % of source LD capacity:
713 * 0=READ only, 1=5%, 2=10%, 3=15% and so on.
716 /* # of idle minutes before device is spun down (0=use FW defaults) */
717 uint16_t spinDownTime;
718 uint8_t reserved[24];
721 /* PCI information about the card. */
722 struct mfi_info_pci {
727 uint8_t reserved[24];
730 /* Host (front end) interface information */
731 struct mfi_info_host {
733 #define MFI_INFO_HOST_PCIX 0x01
734 #define MFI_INFO_HOST_PCIE 0x02
735 #define MFI_INFO_HOST_ISCSI 0x04
736 #define MFI_INFO_HOST_SAS3G 0x08
739 uint64_t port_addr[8];
742 /* Device (back end) interface information */
743 struct mfi_info_device {
745 #define MFI_INFO_DEV_SPI 0x01
746 #define MFI_INFO_DEV_SAS3G 0x02
747 #define MFI_INFO_DEV_SATA1 0x04
748 #define MFI_INFO_DEV_SATA3G 0x08
751 uint64_t port_addr[8];
754 /* Firmware component information */
755 struct mfi_info_component {
762 /* Controller default settings */
763 struct mfi_defaults {
765 uint8_t phy_polarity;
766 uint8_t background_rate;
771 uint8_t cache_when_bbu_bad;
774 uint8_t alarm_disable;
777 uint8_t dirty_led_shows_drive_activity;
778 uint8_t bios_continue_on_error;
779 uint8_t spindown_mode;
780 uint8_t allowed_device_types;
781 uint8_t allow_mix_in_enclosure;
782 uint8_t allow_mix_in_ld;
783 uint8_t allow_sata_in_cluster;
784 uint8_t max_chained_enclosures;
785 uint8_t disable_ctrl_r;
786 uint8_t enabel_web_bios;
787 uint8_t phy_polarity_split;
788 uint8_t direct_pd_mapping;
789 uint8_t bios_enumerate_lds;
790 uint8_t restored_hot_spare_on_insertion;
791 uint8_t expose_enclosure_devices;
792 uint8_t maintain_pd_fail_history;
796 /* Controller default settings */
797 struct mfi_bios_data {
798 uint16_t boot_target_id;
799 uint8_t do_not_int_13;
800 uint8_t continue_on_error;
803 uint8_t expose_all_drives;
804 uint8_t reserved[56];
808 /* SAS (?) controller info, returned from MFI_DCMD_CTRL_GETINFO. */
809 struct mfi_ctrl_info {
810 struct mfi_info_pci pci;
811 struct mfi_info_host host;
812 struct mfi_info_device device;
814 /* Firmware components that are present and active. */
815 uint32_t image_check_word;
816 uint32_t image_component_count;
817 struct mfi_info_component image_component[8];
819 /* Firmware components that have been flashed but are inactive */
820 uint32_t pending_image_component_count;
821 struct mfi_info_component pending_image_component[8];
827 char product_name[80];
828 char serial_number[32];
830 #define MFI_INFO_HW_BBU 0x01
831 #define MFI_INFO_HW_ALARM 0x02
832 #define MFI_INFO_HW_NVRAM 0x04
833 #define MFI_INFO_HW_UART 0x08
834 uint32_t current_fw_time;
836 uint16_t max_sg_elements;
837 uint32_t max_request_size;
838 uint16_t lds_present;
839 uint16_t lds_degraded;
840 uint16_t lds_offline;
842 uint16_t pd_disks_present;
843 uint16_t pd_disks_pred_failure;
844 uint16_t pd_disks_failed;
846 uint16_t memory_size;
848 uint16_t ram_correctable_errors;
849 uint16_t ram_uncorrectable_errors;
850 uint8_t cluster_allowed;
851 uint8_t cluster_active;
852 uint16_t max_strips_per_io;
854 uint32_t raid_levels;
855 #define MFI_INFO_RAID_0 0x01
856 #define MFI_INFO_RAID_1 0x02
857 #define MFI_INFO_RAID_5 0x04
858 #define MFI_INFO_RAID_1E 0x08
859 #define MFI_INFO_RAID_6 0x10
861 uint32_t adapter_ops;
862 #define MFI_INFO_AOPS_RBLD_RATE 0x0001
863 #define MFI_INFO_AOPS_CC_RATE 0x0002
864 #define MFI_INFO_AOPS_BGI_RATE 0x0004
865 #define MFI_INFO_AOPS_RECON_RATE 0x0008
866 #define MFI_INFO_AOPS_PATROL_RATE 0x0010
867 #define MFI_INFO_AOPS_ALARM_CONTROL 0x0020
868 #define MFI_INFO_AOPS_CLUSTER_SUPPORTED 0x0040
869 #define MFI_INFO_AOPS_BBU 0x0080
870 #define MFI_INFO_AOPS_SPANNING_ALLOWED 0x0100
871 #define MFI_INFO_AOPS_DEDICATED_SPARES 0x0200
872 #define MFI_INFO_AOPS_REVERTIBLE_SPARES 0x0400
873 #define MFI_INFO_AOPS_FOREIGN_IMPORT 0x0800
874 #define MFI_INFO_AOPS_SELF_DIAGNOSTIC 0x1000
875 #define MFI_INFO_AOPS_MIXED_ARRAY 0x2000
876 #define MFI_INFO_AOPS_GLOBAL_SPARES 0x4000
879 #define MFI_INFO_LDOPS_READ_POLICY 0x01
880 #define MFI_INFO_LDOPS_WRITE_POLICY 0x02
881 #define MFI_INFO_LDOPS_IO_POLICY 0x04
882 #define MFI_INFO_LDOPS_ACCESS_POLICY 0x08
883 #define MFI_INFO_LDOPS_DISK_CACHE_POLICY 0x10
889 } __packed stripe_sz_ops;
892 #define MFI_INFO_PDOPS_FORCE_ONLINE 0x01
893 #define MFI_INFO_PDOPS_FORCE_OFFLINE 0x02
894 #define MFI_INFO_PDOPS_FORCE_REBUILD 0x04
896 uint32_t pd_mix_support;
897 #define MFI_INFO_PDMIX_SAS 0x01
898 #define MFI_INFO_PDMIX_SATA 0x02
899 #define MFI_INFO_PDMIX_ENCL 0x04
900 #define MFI_INFO_PDMIX_LD 0x08
901 #define MFI_INFO_PDMIX_SATA_CLUSTER 0x10
903 uint8_t ecc_bucket_count;
904 uint8_t reserved2[11];
905 struct mfi_ctrl_props properties;
906 char package_version[0x60];
907 uint8_t pad[0x800 - 0x6a0];
910 /* keep track of an event. */
920 /* event log state. */
921 struct mfi_evt_log_state {
922 uint32_t newest_seq_num;
923 uint32_t oldest_seq_num;
924 uint32_t clear_seq_num;
925 uint32_t shutdown_seq_num;
926 uint32_t boot_seq_num;
929 struct mfi_progress {
931 uint16_t elapsed_seconds;
942 uint8_t enclosure_index;
946 /* SAS (?) event detail, returned from MFI_DCMD_CTRL_EVENT_WAIT. */
947 struct mfi_evt_detail {
951 union mfi_evt evt_class;
953 uint8_t reserved1[15];
957 struct mfi_evt_pd pd;
965 struct mfi_evt_ld ld;
968 struct mfi_evt_ld ld;
974 struct mfi_evt_ld ld;
978 struct mfi_evt_ld ld;
986 struct mfi_evt_ld ld;
987 struct mfi_evt_pd pd;
991 struct mfi_evt_ld ld;
992 struct mfi_progress prog;
996 struct mfi_evt_ld ld;
1003 struct mfi_evt_ld ld;
1006 struct mfi_evt_pd pd;
1009 struct mfi_evt_pd pd;
1015 struct mfi_evt_pd pd;
1020 struct mfi_evt_pd pd;
1021 struct mfi_evt_ld ld;
1025 struct mfi_evt_pd pd;
1026 struct mfi_progress prog;
1030 struct mfi_evt_pd ld;
1031 uint32_t prev_state;
1038 uint16_t subVenderId;
1039 uint16_t subDeviceId;
1048 uint16_t elapsedSeconds;
1063 char description[128];
1066 struct mfi_evt_list {
1069 struct mfi_evt_detail event[1];
1080 union mfi_pd_ddf_type {
1084 uint16_t forced_pd_guid : 1;
1086 uint16_t is_global_spare : 1;
1087 uint16_t is_spare : 1;
1088 uint16_t is_foreign : 1;
1089 uint16_t reserved : 7;
1102 struct mfi_pd_progress {
1104 #define MFI_PD_PROGRESS_REBUILD (1<<0)
1105 #define MFI_PD_PROGRESS_PATROL (1<<1)
1106 #define MFI_PD_PROGRESS_CLEAR (1<<2)
1107 struct mfi_progress rbld;
1108 struct mfi_progress patrol;
1109 struct mfi_progress clear;
1110 struct mfi_progress reserved[4];
1113 struct mfi_pd_info {
1114 union mfi_pd_ref ref;
1115 uint8_t inquiry_data[96];
1116 uint8_t vpd_page83[64];
1117 uint8_t not_supported;
1118 uint8_t scsi_dev_type;
1119 uint8_t connected_port_bitmap;
1120 uint8_t device_speed;
1121 uint32_t media_err_count;
1122 uint32_t other_err_count;
1123 uint32_t pred_fail_count;
1124 uint32_t last_pred_fail_event_seq_num;
1125 uint16_t fw_state; /* MFI_PD_STATE_* */
1126 uint8_t disabled_for_removal;
1128 union mfi_pd_ddf_type state;
1131 uint8_t is_path_broken;
1132 uint8_t reserved[6];
1133 uint64_t sas_addr[4];
1136 uint64_t non_coerced_size;
1137 uint64_t coerced_size;
1138 uint16_t encl_device_id;
1140 uint8_t slot_number;
1141 struct mfi_pd_progress prog_info;
1142 uint8_t bad_block_table_full;
1143 uint8_t unusable_in_current_config;
1144 uint8_t vpd_page83_ext[64];
1145 uint8_t reserved[512-358];
1148 struct mfi_pd_address {
1150 uint16_t encl_device_id;
1152 uint8_t slot_number;
1153 uint8_t scsi_dev_type; /* 0 = disk */
1154 uint8_t connect_port_bitmap;
1155 uint64_t sas_addr[2];
1158 #define MAX_SYS_PDS 240
1159 struct mfi_pd_list {
1162 struct mfi_pd_address addr[MAX_SYS_PDS];
1166 MFI_PD_STATE_UNCONFIGURED_GOOD = 0x00,
1167 MFI_PD_STATE_UNCONFIGURED_BAD = 0x01,
1168 MFI_PD_STATE_HOT_SPARE = 0x02,
1169 MFI_PD_STATE_OFFLINE = 0x10,
1170 MFI_PD_STATE_FAILED = 0x11,
1171 MFI_PD_STATE_REBUILD = 0x14,
1172 MFI_PD_STATE_ONLINE = 0x18,
1173 MFI_PD_STATE_COPYBACK = 0x20,
1174 MFI_PD_STATE_SYSTEM = 0x40
1178 * "SYSTEM" disk appears to be "JBOD" support from the RAID controller.
1179 * Adding a #define to denote this.
1181 #define MFI_PD_STATE_JBOD MFI_PD_STATE_SYSTEM
1192 struct mfi_ld_list {
1196 union mfi_ld_ref ld;
1198 uint8_t reserved2[3];
1200 } ld_list[MFI_MAX_LD];
1203 enum mfi_ld_access {
1204 MFI_LD_ACCESS_RW = 0,
1205 MFI_LD_ACCSSS_RO = 2,
1206 MFI_LD_ACCESS_BLOCKED = 3,
1208 #define MFI_LD_ACCESS_MASK 3
1211 MFI_LD_STATE_OFFLINE = 0,
1212 MFI_LD_STATE_PARTIALLY_DEGRADED = 1,
1213 MFI_LD_STATE_DEGRADED = 2,
1214 MFI_LD_STATE_OPTIMAL = 3
1217 struct mfi_ld_props {
1218 union mfi_ld_ref ld;
1220 uint8_t default_cache_policy;
1221 uint8_t access_policy;
1222 uint8_t disk_cache_policy;
1223 uint8_t current_cache_policy;
1225 uint8_t reserved[7];
1228 struct mfi_ld_params {
1229 uint8_t primary_raid_level;
1230 uint8_t raid_level_qualifier;
1231 uint8_t secondary_raid_level;
1232 uint8_t stripe_size;
1237 #define MFI_LD_PARAMS_INIT_NO 0
1238 #define MFI_LD_PARAMS_INIT_QUICK 1
1239 #define MFI_LD_PARAMS_INIT_FULL 2
1240 uint8_t is_consistent;
1241 uint8_t reserved1[6];
1243 uint8_t reserved2[16];
1246 struct mfi_ld_progress {
1248 #define MFI_LD_PROGRESS_CC (1<<0)
1249 #define MFI_LD_PROGRESS_BGI (1<<1)
1250 #define MFI_LD_PROGRESS_FGI (1<<2)
1251 #define MFI_LD_PROGRESS_RECON (1<<3)
1252 struct mfi_progress cc;
1253 struct mfi_progress bgi;
1254 struct mfi_progress fgi;
1255 struct mfi_progress recon;
1256 struct mfi_progress reserved[4];
1260 uint64_t start_block;
1261 uint64_t num_blocks;
1263 uint8_t reserved[6];
1266 #define MFI_MAX_SPAN_DEPTH 8
1267 struct mfi_ld_config {
1268 struct mfi_ld_props properties;
1269 struct mfi_ld_params params;
1270 struct mfi_span span[MFI_MAX_SPAN_DEPTH];
1273 struct mfi_ld_info {
1274 struct mfi_ld_config ld_config;
1276 struct mfi_ld_progress progress;
1277 uint16_t cluster_owner;
1278 uint8_t reconstruct_active;
1279 uint8_t reserved1[1];
1280 uint8_t vpd_page83[64];
1281 uint8_t reserved2[16];
1284 #define MFI_MAX_ARRAYS 16
1286 union mfi_pd_ref ref;
1288 #define MFI_SPARE_DEDICATED (1 << 0)
1289 #define MFI_SPARE_REVERTIBLE (1 << 1)
1290 #define MFI_SPARE_ENCL_AFFINITY (1 << 2)
1291 uint8_t reserved[2];
1292 uint8_t array_count;
1293 uint16_t array_ref[MFI_MAX_ARRAYS];
1296 #define MFI_MAX_ROW_SIZE 32
1304 union mfi_pd_ref ref; /* 0xffff == missing drive */
1305 uint16_t fw_state; /* MFI_PD_STATE_* */
1310 } pd[MFI_MAX_ROW_SIZE];
1313 struct mfi_config_data {
1315 uint16_t array_count;
1316 uint16_t array_size;
1317 uint16_t log_drv_count;
1318 uint16_t log_drv_size;
1319 uint16_t spares_count;
1320 uint16_t spares_size;
1321 uint8_t reserved[16];
1322 struct mfi_array array[0];
1323 struct mfi_ld_config ld[0];
1324 struct mfi_spare spare[0];
1327 struct mfi_bbu_capacity_info {
1328 uint16_t relative_charge;
1329 uint16_t absolute_charge;
1330 uint16_t remaining_capacity;
1331 uint16_t full_charge_capacity;
1332 uint16_t run_time_to_empty;
1333 uint16_t average_time_to_empty;
1334 uint16_t average_time_to_full;
1335 uint16_t cycle_count;
1337 uint16_t remaining_capacity_alarm;
1338 uint16_t remaining_time_alarm;
1339 uint8_t reserved[26];
1342 struct mfi_bbu_design_info {
1344 uint16_t design_capacity;
1345 uint16_t design_voltage;
1347 uint16_t serial_number;
1348 uint16_t pack_stat_config;
1349 uint8_t mfg_name[12];
1350 uint8_t device_name[8];
1351 uint8_t device_chemistry[8];
1352 uint8_t mfg_data[8];
1353 uint8_t reserved[17];
1356 struct mfi_ibbu_state {
1357 uint16_t gas_guage_status;
1358 uint16_t relative_charge;
1359 uint16_t charger_system_state;
1360 uint16_t charger_system_ctrl;
1361 uint16_t charging_current;
1362 uint16_t absolute_charge;
1364 uint8_t reserved[18];
1367 struct mfi_bbu_state {
1368 uint16_t gas_guage_status;
1369 uint16_t relative_charge;
1370 uint16_t charger_status;
1371 uint16_t remaining_capacity;
1372 uint16_t full_charge_capacity;
1373 uint8_t is_SOH_good;
1374 uint8_t reserved[21];
1377 struct mfi_bbu_properties {
1378 uint32_t auto_learn_period;
1379 uint32_t next_learn_time;
1380 uint8_t learn_delay_interval;
1381 uint8_t auto_learn_mode;
1383 uint8_t reserved[21];
1386 union mfi_bbu_status_detail {
1387 struct mfi_ibbu_state ibbu;
1388 struct mfi_bbu_state bbu;
1391 struct mfi_bbu_status {
1392 uint8_t battery_type;
1393 #define MFI_BBU_TYPE_NONE 0
1394 #define MFI_BBU_TYPE_IBBU 1
1395 #define MFI_BBU_TYPE_BBU 2
1399 uint16_t temperature;
1401 #define MFI_BBU_STATE_PACK_MISSING (1 << 0)
1402 #define MFI_BBU_STATE_VOLTAGE_LOW (1 << 1)
1403 #define MFI_BBU_STATE_TEMPERATURE_HIGH (1 << 2)
1404 #define MFI_BBU_STATE_CHARGE_ACTIVE (1 << 3)
1405 #define MFI_BBU_STATE_DISCHARGE_ACTIVE (1 << 4)
1406 #define MFI_BBU_STATE_LEARN_CYC_REQ (1 << 5)
1407 #define MFI_BBU_STATE_LEARN_CYC_ACTIVE (1 << 6)
1408 #define MFI_BBU_STATE_LEARN_CYC_FAIL (1 << 7)
1409 #define MFI_BBU_STATE_LEARN_CYC_TIMEOUT (1 << 8)
1410 #define MFI_BBU_STATE_I2C_ERR_DETECT (1 << 9)
1412 union mfi_bbu_status_detail detail;
1416 MFI_PR_STATE_STOPPED = 0,
1417 MFI_PR_STATE_READY = 1,
1418 MFI_PR_STATE_ACTIVE = 2,
1419 MFI_PR_STATE_ABORTED = 0xff
1422 struct mfi_pr_status {
1423 uint32_t num_iteration;
1425 uint8_t num_pd_done;
1426 uint8_t reserved[10];
1429 enum mfi_pr_opmode {
1430 MFI_PR_OPMODE_AUTO = 0,
1431 MFI_PR_OPMODE_MANUAL = 1,
1432 MFI_PR_OPMODE_DISABLED = 2
1435 struct mfi_pr_properties {
1439 uint8_t exclude_ld_count;
1440 uint16_t excluded_ld[MFI_MAX_LD];
1441 uint8_t cur_pd_map[MFI_MAX_PD / 8];
1442 uint8_t last_pd_map[MFI_MAX_PD / 8];
1445 uint32_t clear_freq;
1448 /* ThunderBolt support */
1451 * Raid Context structure which describes MegaRAID specific IO Paramenters
1452 * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
1454 typedef struct _MPI2_SCSI_IO_VENDOR_UNIQUE {
1455 uint16_t resvd0; /* 0x00 - 0x01 */
1456 uint16_t timeoutValue; /* 0x02 - 0x03 */
1457 uint8_t regLockFlags;
1459 uint16_t TargetID; /* 0x06 - 0x07 */
1461 uint64_t RegLockLBA; /* 0x08 - 0x0F */
1463 uint32_t RegLockLength; /* 0x10 - 0x13 */
1465 uint16_t SMID; /* 0x14 - 0x15 nextLMId */
1466 uint8_t exStatus; /* 0x16 */
1467 uint8_t Status; /* 0x17 status */
1469 uint8_t RAIDFlags; /* 0x18 */
1470 uint8_t numSGE; /* 0x19 numSge */
1471 uint16_t configSeqNum; /* 0x1A - 0x1B */
1472 uint8_t spanArm; /* 0x1C */
1473 uint8_t resvd2[3]; /* 0x1D - 0x1F */
1474 } MPI2_SCSI_IO_VENDOR_UNIQUE, MPI25_SCSI_IO_VENDOR_UNIQUE;
1476 /*****************************************************************************
1480 *****************************************************************************/
1482 #define NA_MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
1483 #define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */
1484 #define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
1485 #define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */
1486 #define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */
1487 #define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */
1488 #define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */
1489 #define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */
1490 #define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */
1491 #define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */
1492 #define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */
1493 #define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */
1494 #define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */
1495 #define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */
1496 #define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */
1497 #define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */
1498 #define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */
1499 #define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */
1500 #define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */
1501 #define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */
1502 #define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */
1503 #define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */
1504 #define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */
1505 #define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */
1506 #define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */
1507 #define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator */
1508 #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) /* Host Based Discovery Action */
1509 #define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) /* Power Management Control */
1510 #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* beginning of product-specific range */
1511 #define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) /* end of product-specific range */
1513 /* Doorbell functions */
1514 #define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
1515 #define MPI2_FUNCTION_HANDSHAKE (0x42)
1517 /*****************************************************************************
1519 * MPI Version Definitions
1521 *****************************************************************************/
1523 #define MPI2_VERSION_MAJOR (0x02)
1524 #define MPI2_VERSION_MINOR (0x00)
1525 #define MPI2_VERSION_MAJOR_MASK (0xFF00)
1526 #define MPI2_VERSION_MAJOR_SHIFT (8)
1527 #define MPI2_VERSION_MINOR_MASK (0x00FF)
1528 #define MPI2_VERSION_MINOR_SHIFT (0)
1529 #define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
1532 #define MPI2_VERSION_02_00 (0x0200)
1534 /* versioning for this MPI header set */
1535 #define MPI2_HEADER_VERSION_UNIT (0x10)
1536 #define MPI2_HEADER_VERSION_DEV (0x00)
1537 #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
1538 #define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
1539 #define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
1540 #define MPI2_HEADER_VERSION_DEV_SHIFT (0)
1541 #define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
1542 MPI2_HEADER_VERSION_DEV)
1545 /* IOCInit Request message */
1546 struct MPI2_IOC_INIT_REQUEST {
1547 uint8_t WhoInit; /* 0x00 */
1548 uint8_t Reserved1; /* 0x01 */
1549 uint8_t ChainOffset; /* 0x02 */
1550 uint8_t Function; /* 0x03 */
1551 uint16_t Reserved2; /* 0x04 */
1552 uint8_t Reserved3; /* 0x06 */
1553 uint8_t MsgFlags; /* 0x07 */
1554 uint8_t VP_ID; /* 0x08 */
1555 uint8_t VF_ID; /* 0x09 */
1556 uint16_t Reserved4; /* 0x0A */
1557 uint16_t MsgVersion; /* 0x0C */
1558 uint16_t HeaderVersion; /* 0x0E */
1559 uint32_t Reserved5; /* 0x10 */
1560 uint16_t Reserved6; /* 0x14 */
1561 uint8_t Reserved7; /* 0x16 */
1562 uint8_t HostMSIxVectors; /* 0x17 */
1563 uint16_t Reserved8; /* 0x18 */
1564 uint16_t SystemRequestFrameSize; /* 0x1A */
1565 uint16_t ReplyDescriptorPostQueueDepth; /* 0x1C */
1566 uint16_t ReplyFreeQueueDepth; /* 0x1E */
1567 uint32_t SenseBufferAddressHigh; /* 0x20 */
1568 uint32_t SystemReplyAddressHigh; /* 0x24 */
1569 uint64_t SystemRequestFrameBaseAddress; /* 0x28 */
1570 uint64_t ReplyDescriptorPostQueueAddress;/* 0x30 */
1571 uint64_t ReplyFreeQueueAddress; /* 0x38 */
1572 uint64_t TimeStamp; /* 0x40 */
1575 /* WhoInit values */
1576 #define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
1577 #define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
1578 #define MPI2_WHOINIT_ROM_BIOS (0x02)
1579 #define MPI2_WHOINIT_PCI_PEER (0x03)
1580 #define MPI2_WHOINIT_HOST_DRIVER (0x04)
1581 #define MPI2_WHOINIT_MANUFACTURER (0x05)
1583 struct MPI2_SGE_CHAIN_UNION {
1585 uint8_t NextChainOffset;
1593 struct MPI2_IEEE_SGE_SIMPLE32 {
1595 uint32_t FlagsLength;
1598 struct MPI2_IEEE_SGE_SIMPLE64 {
1606 typedef union _MPI2_IEEE_SGE_SIMPLE_UNION {
1607 struct MPI2_IEEE_SGE_SIMPLE32 Simple32;
1608 struct MPI2_IEEE_SGE_SIMPLE64 Simple64;
1609 } MPI2_IEEE_SGE_SIMPLE_UNION;
1611 typedef struct _MPI2_SGE_SIMPLE_UNION {
1612 uint32_t FlagsLength;
1617 } MPI2_SGE_SIMPLE_UNION;
1619 /****************************************************************************
1620 * IEEE SGE field definitions and masks
1621 ****************************************************************************/
1623 /* Flags field bit definitions */
1625 #define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80)
1627 #define MPI2_IEEE32_SGE_FLAGS_SHIFT (24)
1629 #define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF)
1633 #define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00)
1634 #define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
1636 /* Data Location Address Space */
1638 #define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03)
1639 #define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00)
1640 #define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01)
1641 #define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
1642 #define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
1646 #define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00)
1647 #define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
1649 /*******************/
1650 /* SCSI IO Control bits */
1651 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
1652 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
1654 #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
1655 #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
1656 #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
1657 #define MPI2_SCSIIO_CONTROL_READ (0x02000000)
1658 #define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
1660 #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
1661 #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
1663 #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
1664 #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
1665 #define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
1666 #define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
1667 #define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
1669 #define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
1670 #define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
1671 #define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
1672 #define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
1674 /*******************/
1677 uint8_t CDB[20]; /* 0x00 */
1678 uint32_t PrimaryReferenceTag; /* 0x14 */
1679 uint16_t PrimaryApplicationTag; /* 0x18 */
1680 uint16_t PrimaryApplicationTagMask; /* 0x1A */
1681 uint32_t TransferLength; /* 0x1C */
1682 } MPI2_SCSI_IO_CDB_EEDP32;
1685 typedef union _MPI2_IEEE_SGE_CHAIN_UNION {
1686 struct MPI2_IEEE_SGE_SIMPLE32 Chain32;
1687 struct MPI2_IEEE_SGE_SIMPLE64 Chain64;
1688 } MPI2_IEEE_SGE_CHAIN_UNION;
1690 typedef union _MPI2_SIMPLE_SGE_UNION {
1691 MPI2_SGE_SIMPLE_UNION MpiSimple;
1692 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
1693 } MPI2_SIMPLE_SGE_UNION;
1695 typedef union _MPI2_SGE_IO_UNION {
1696 MPI2_SGE_SIMPLE_UNION MpiSimple;
1697 struct MPI2_SGE_CHAIN_UNION MpiChain;
1698 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
1699 MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
1700 } MPI2_SGE_IO_UNION;
1704 MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
1705 MPI2_SGE_SIMPLE_UNION SGE;
1706 } MPI2_SCSI_IO_CDB_UNION;
1711 #define MPI25_IEEE_SGE_FLAGS_END_OF_LIST (0x40)
1713 typedef struct _MPI25_IEEE_SGE_CHAIN64 {
1717 uint8_t NextChainOffset;
1719 } MPI25_IEEE_SGE_CHAIN64, *pMpi25IeeeSgeChain64_t;
1721 /* use MPI2_IEEE_SGE_FLAGS_ defines for the Flags field */
1727 * RAID SCSI IO Request Message
1728 * Total SGE count will be one less than _MPI2_SCSI_IO_REQUEST
1730 struct mfi_mpi2_request_raid_scsi_io {
1731 uint16_t DevHandle; /* 0x00 */
1732 uint8_t ChainOffset; /* 0x02 */
1733 uint8_t Function; /* 0x03 */
1734 uint16_t Reserved1; /* 0x04 */
1735 uint8_t Reserved2; /* 0x06 */
1736 uint8_t MsgFlags; /* 0x07 */
1737 uint8_t VP_ID; /* 0x08 */
1738 uint8_t VF_ID; /* 0x09 */
1739 uint16_t Reserved3; /* 0x0A */
1740 uint32_t SenseBufferLowAddress; /* 0x0C */
1741 uint16_t SGLFlags; /* 0x10 */
1742 uint8_t SenseBufferLength; /* 0x12 */
1743 uint8_t Reserved4; /* 0x13 */
1744 uint8_t SGLOffset0; /* 0x14 */
1745 uint8_t SGLOffset1; /* 0x15 */
1746 uint8_t SGLOffset2; /* 0x16 */
1747 uint8_t SGLOffset3; /* 0x17 */
1748 uint32_t SkipCount; /* 0x18 */
1749 uint32_t DataLength; /* 0x1C */
1750 uint32_t BidirectionalDataLength; /* 0x20 */
1751 uint16_t IoFlags; /* 0x24 */
1752 uint16_t EEDPFlags; /* 0x26 */
1753 uint32_t EEDPBlockSize; /* 0x28 */
1754 uint32_t SecondaryReferenceTag; /* 0x2C */
1755 uint16_t SecondaryApplicationTag; /* 0x30 */
1756 uint16_t ApplicationTagTranslationMask; /* 0x32 */
1757 uint8_t LUN[8]; /* 0x34 */
1758 uint32_t Control; /* 0x3C */
1759 MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
1760 MPI2_SCSI_IO_VENDOR_UNIQUE RaidContext; /* 0x60 */
1761 MPI2_SGE_IO_UNION SGL; /* 0x80 */
1765 * MPT RAID MFA IO Descriptor.
1767 typedef struct _MFI_RAID_MFA_IO_DESCRIPTOR {
1768 uint32_t RequestFlags : 8;
1769 uint32_t MessageAddress1 : 24; /* bits 31:8*/
1770 uint32_t MessageAddress2; /* bits 61:32 */
1771 } MFI_RAID_MFA_IO_REQUEST_DESCRIPTOR,*PMFI_RAID_MFA_IO_REQUEST_DESCRIPTOR;
1773 struct mfi_mpi2_request_header {
1774 uint8_t RequestFlags; /* 0x00 */
1775 uint8_t MSIxIndex; /* 0x01 */
1776 uint16_t SMID; /* 0x02 */
1777 uint16_t LMID; /* 0x04 */
1780 /* defines for the RequestFlags field */
1781 #define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
1782 #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
1783 #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
1784 #define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
1785 #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
1786 #define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
1788 #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
1790 struct mfi_mpi2_request_high_priority {
1791 struct mfi_mpi2_request_header header;
1795 struct mfi_mpi2_request_scsi_io {
1796 struct mfi_mpi2_request_header header;
1797 uint16_t scsi_io_dev_handle;
1800 struct mfi_mpi2_request_scsi_target {
1801 struct mfi_mpi2_request_header header;
1802 uint16_t scsi_target_io_index;
1805 /* Request Descriptors */
1806 union mfi_mpi2_request_descriptor {
1807 struct mfi_mpi2_request_header header;
1808 struct mfi_mpi2_request_high_priority high_priority;
1809 struct mfi_mpi2_request_scsi_io scsi_io;
1810 struct mfi_mpi2_request_scsi_target scsi_target;
1815 struct mfi_mpi2_reply_header {
1816 uint8_t ReplyFlags; /* 0x00 */
1817 uint8_t MSIxIndex; /* 0x01 */
1818 uint16_t SMID; /* 0x02 */
1821 /* defines for the ReplyFlags field */
1822 #define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
1823 #define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
1824 #define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
1825 #define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
1826 #define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
1827 #define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
1828 #define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
1830 /* values for marking a reply descriptor as unused */
1831 #define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF)
1832 #define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF)
1834 struct mfi_mpi2_reply_default {
1835 struct mfi_mpi2_reply_header header;
1836 uint32_t DescriptorTypeDependent2;
1839 struct mfi_mpi2_reply_address {
1840 struct mfi_mpi2_reply_header header;
1841 uint32_t ReplyFrameAddress;
1844 struct mfi_mpi2_reply_scsi_io {
1845 struct mfi_mpi2_reply_header header;
1846 uint16_t TaskTag; /* 0x04 */
1847 uint16_t Reserved1; /* 0x06 */
1850 struct mfi_mpi2_reply_target_assist {
1851 struct mfi_mpi2_reply_header header;
1852 uint8_t SequenceNumber; /* 0x04 */
1853 uint8_t Reserved1; /* 0x04 */
1854 uint16_t IoIndex; /* 0x06 */
1857 struct mfi_mpi2_reply_target_cmd_buffer {
1858 struct mfi_mpi2_reply_header header;
1859 uint8_t SequenceNumber; /* 0x04 */
1860 uint8_t Flags; /* 0x04 */
1861 uint16_t InitiatorDevHandle; /* 0x06 */
1862 uint16_t IoIndex; /* 0x06 */
1865 struct mfi_mpi2_reply_raid_accel {
1866 struct mfi_mpi2_reply_header header;
1867 uint8_t SequenceNumber; /* 0x04 */
1868 uint32_t Reserved; /* 0x04 */
1871 /* union of Reply Descriptors */
1872 union mfi_mpi2_reply_descriptor {
1873 struct mfi_mpi2_reply_header header;
1874 struct mfi_mpi2_reply_scsi_io scsi_io;
1875 struct mfi_mpi2_reply_target_assist target_assist;
1876 struct mfi_mpi2_reply_target_cmd_buffer target_cmd;
1877 struct mfi_mpi2_reply_raid_accel raid_accel;
1878 struct mfi_mpi2_reply_default reply_default;
1882 struct IO_REQUEST_INFO {
1883 uint64_t ldStartBlock;
1892 #define MFI_SCSI_MAX_TARGETS 128
1893 #define MFI_SCSI_MAX_LUNS 8
1894 #define MFI_SCSI_INITIATOR_ID 255
1895 #define MFI_SCSI_MAX_CMDS 8
1896 #define MFI_SCSI_MAX_CDB_LEN 16
1898 #endif /* _MFIREG_H */