2 * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
13 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS `AS IS' AND
14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 #include <net/sff8472.h>
32 mlx5e_create_stats(struct sysctl_ctx_list *ctx,
33 struct sysctl_oid_list *parent, const char *buffer,
34 const char **desc, unsigned num, u64 * arg)
36 struct sysctl_oid *node;
41 node = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO,
42 buffer, CTLFLAG_RD, NULL, "Statistics");
45 for (x = 0; x != num; x++) {
46 SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
47 desc[2 * x], CTLFLAG_RD, arg + x, desc[2 * x + 1]);
52 mlx5e_ethtool_sync_tx_completion_fact(struct mlx5e_priv *priv)
55 * Limit the maximum distance between completion events to
56 * half of the currently set TX queue size.
58 * The maximum number of queue entries a single IP packet can
59 * consume is given by MLX5_SEND_WQE_MAX_WQEBBS.
61 * The worst case max value is then given as below:
63 uint64_t max = priv->params_ethtool.tx_queue_size /
64 (2 * MLX5_SEND_WQE_MAX_WQEBBS);
67 * Update the maximum completion factor value in case the
68 * tx_queue_size field changed. Ensure we don't overflow
75 priv->params_ethtool.tx_completion_fact_max = max;
78 * Verify that the current TX completion factor is within the
81 if (priv->params_ethtool.tx_completion_fact < 1)
82 priv->params_ethtool.tx_completion_fact = 1;
83 else if (priv->params_ethtool.tx_completion_fact > max)
84 priv->params_ethtool.tx_completion_fact = max;
87 #define MLX5_PARAM_OFFSET(n) \
88 __offsetof(struct mlx5e_priv, params_ethtool.n)
91 mlx5e_ethtool_handler(SYSCTL_HANDLER_ARGS)
93 struct mlx5e_priv *priv = arg1;
100 value = priv->params_ethtool.arg[arg2];
102 error = sysctl_handle_64(oidp, &value, 0, req);
103 if (error || req->newptr == NULL ||
104 value == priv->params_ethtool.arg[arg2])
107 /* assign new value */
108 priv->params_ethtool.arg[arg2] = value;
112 /* check if device is gone */
117 was_opened = test_bit(MLX5E_STATE_OPENED, &priv->state);
118 mode_modify = MLX5_CAP_GEN(priv->mdev, cq_period_mode_modify);
120 switch (MLX5_PARAM_OFFSET(arg[arg2])) {
121 case MLX5_PARAM_OFFSET(rx_coalesce_usecs):
122 /* import RX coal time */
123 if (priv->params_ethtool.rx_coalesce_usecs < 1)
124 priv->params_ethtool.rx_coalesce_usecs = 0;
125 else if (priv->params_ethtool.rx_coalesce_usecs >
126 MLX5E_FLD_MAX(cqc, cq_period)) {
127 priv->params_ethtool.rx_coalesce_usecs =
128 MLX5E_FLD_MAX(cqc, cq_period);
130 priv->params.rx_cq_moderation_usec =
131 priv->params_ethtool.rx_coalesce_usecs;
133 /* check to avoid down and up the network interface */
135 error = mlx5e_refresh_channel_params(priv);
138 case MLX5_PARAM_OFFSET(rx_coalesce_pkts):
139 /* import RX coal pkts */
140 if (priv->params_ethtool.rx_coalesce_pkts < 1)
141 priv->params_ethtool.rx_coalesce_pkts = 0;
142 else if (priv->params_ethtool.rx_coalesce_pkts >
143 MLX5E_FLD_MAX(cqc, cq_max_count)) {
144 priv->params_ethtool.rx_coalesce_pkts =
145 MLX5E_FLD_MAX(cqc, cq_max_count);
147 priv->params.rx_cq_moderation_pkts =
148 priv->params_ethtool.rx_coalesce_pkts;
150 /* check to avoid down and up the network interface */
152 error = mlx5e_refresh_channel_params(priv);
155 case MLX5_PARAM_OFFSET(tx_coalesce_usecs):
156 /* import TX coal time */
157 if (priv->params_ethtool.tx_coalesce_usecs < 1)
158 priv->params_ethtool.tx_coalesce_usecs = 0;
159 else if (priv->params_ethtool.tx_coalesce_usecs >
160 MLX5E_FLD_MAX(cqc, cq_period)) {
161 priv->params_ethtool.tx_coalesce_usecs =
162 MLX5E_FLD_MAX(cqc, cq_period);
164 priv->params.tx_cq_moderation_usec =
165 priv->params_ethtool.tx_coalesce_usecs;
167 /* check to avoid down and up the network interface */
169 error = mlx5e_refresh_channel_params(priv);
172 case MLX5_PARAM_OFFSET(tx_coalesce_pkts):
173 /* import TX coal pkts */
174 if (priv->params_ethtool.tx_coalesce_pkts < 1)
175 priv->params_ethtool.tx_coalesce_pkts = 0;
176 else if (priv->params_ethtool.tx_coalesce_pkts >
177 MLX5E_FLD_MAX(cqc, cq_max_count)) {
178 priv->params_ethtool.tx_coalesce_pkts =
179 MLX5E_FLD_MAX(cqc, cq_max_count);
181 priv->params.tx_cq_moderation_pkts =
182 priv->params_ethtool.tx_coalesce_pkts;
184 /* check to avoid down and up the network interface */
186 error = mlx5e_refresh_channel_params(priv);
189 case MLX5_PARAM_OFFSET(tx_queue_size):
190 /* network interface must be down */
192 mlx5e_close_locked(priv->ifp);
194 /* import TX queue size */
195 if (priv->params_ethtool.tx_queue_size <
196 (1 << MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE)) {
197 priv->params_ethtool.tx_queue_size =
198 (1 << MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE);
199 } else if (priv->params_ethtool.tx_queue_size >
200 priv->params_ethtool.tx_queue_size_max) {
201 priv->params_ethtool.tx_queue_size =
202 priv->params_ethtool.tx_queue_size_max;
204 /* store actual TX queue size */
205 priv->params.log_sq_size =
206 order_base_2(priv->params_ethtool.tx_queue_size);
207 priv->params_ethtool.tx_queue_size =
208 1 << priv->params.log_sq_size;
210 /* verify TX completion factor */
211 mlx5e_ethtool_sync_tx_completion_fact(priv);
213 /* restart network interface, if any */
215 mlx5e_open_locked(priv->ifp);
218 case MLX5_PARAM_OFFSET(rx_queue_size):
219 /* network interface must be down */
221 mlx5e_close_locked(priv->ifp);
223 /* import RX queue size */
224 if (priv->params_ethtool.rx_queue_size <
225 (1 << MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE)) {
226 priv->params_ethtool.rx_queue_size =
227 (1 << MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE);
228 } else if (priv->params_ethtool.rx_queue_size >
229 priv->params_ethtool.rx_queue_size_max) {
230 priv->params_ethtool.rx_queue_size =
231 priv->params_ethtool.rx_queue_size_max;
233 /* store actual RX queue size */
234 priv->params.log_rq_size =
235 order_base_2(priv->params_ethtool.rx_queue_size);
236 priv->params_ethtool.rx_queue_size =
237 1 << priv->params.log_rq_size;
239 /* update least number of RX WQEs */
240 priv->params.min_rx_wqes = min(
241 priv->params_ethtool.rx_queue_size - 1,
242 MLX5E_PARAMS_DEFAULT_MIN_RX_WQES);
244 /* restart network interface, if any */
246 mlx5e_open_locked(priv->ifp);
249 case MLX5_PARAM_OFFSET(channels_rsss):
250 /* network interface must be down */
252 mlx5e_close_locked(priv->ifp);
254 /* import number of channels */
255 if (priv->params_ethtool.channels_rsss < 1)
256 priv->params_ethtool.channels_rsss = 1;
257 else if (priv->params_ethtool.channels_rsss > 128)
258 priv->params_ethtool.channels_rsss = 128;
260 priv->params.channels_rsss = priv->params_ethtool.channels_rsss;
262 /* restart network interface, if any */
264 mlx5e_open_locked(priv->ifp);
267 case MLX5_PARAM_OFFSET(channels):
268 /* network interface must be down */
270 mlx5e_close_locked(priv->ifp);
272 /* import number of channels */
273 if (priv->params_ethtool.channels < 1)
274 priv->params_ethtool.channels = 1;
275 else if (priv->params_ethtool.channels >
276 (u64) priv->mdev->priv.eq_table.num_comp_vectors) {
277 priv->params_ethtool.channels =
278 (u64) priv->mdev->priv.eq_table.num_comp_vectors;
280 priv->params.num_channels = priv->params_ethtool.channels;
282 /* restart network interface, if any */
284 mlx5e_open_locked(priv->ifp);
287 case MLX5_PARAM_OFFSET(rx_coalesce_mode):
288 /* network interface must be down */
289 if (was_opened != 0 && mode_modify == 0)
290 mlx5e_close_locked(priv->ifp);
292 /* import RX coalesce mode */
293 if (priv->params_ethtool.rx_coalesce_mode != 0)
294 priv->params_ethtool.rx_coalesce_mode = 1;
295 priv->params.rx_cq_moderation_mode =
296 priv->params_ethtool.rx_coalesce_mode;
298 /* restart network interface, if any */
299 if (was_opened != 0) {
300 if (mode_modify == 0)
301 mlx5e_open_locked(priv->ifp);
303 error = mlx5e_refresh_channel_params(priv);
307 case MLX5_PARAM_OFFSET(tx_coalesce_mode):
308 /* network interface must be down */
309 if (was_opened != 0 && mode_modify == 0)
310 mlx5e_close_locked(priv->ifp);
312 /* import TX coalesce mode */
313 if (priv->params_ethtool.tx_coalesce_mode != 0)
314 priv->params_ethtool.tx_coalesce_mode = 1;
315 priv->params.tx_cq_moderation_mode =
316 priv->params_ethtool.tx_coalesce_mode;
318 /* restart network interface, if any */
319 if (was_opened != 0) {
320 if (mode_modify == 0)
321 mlx5e_open_locked(priv->ifp);
323 error = mlx5e_refresh_channel_params(priv);
327 case MLX5_PARAM_OFFSET(hw_lro):
328 /* network interface must be down */
330 mlx5e_close_locked(priv->ifp);
332 /* import HW LRO mode */
333 if (priv->params_ethtool.hw_lro != 0) {
334 if ((priv->ifp->if_capenable & IFCAP_LRO) &&
335 MLX5_CAP_ETH(priv->mdev, lro_cap)) {
336 priv->params.hw_lro_en = 1;
337 priv->params_ethtool.hw_lro = 1;
339 priv->params.hw_lro_en = 0;
340 priv->params_ethtool.hw_lro = 0;
343 if_printf(priv->ifp, "Can't enable HW LRO: "
344 "The HW or SW LRO feature is disabled\n");
347 priv->params.hw_lro_en = 0;
349 /* restart network interface, if any */
351 mlx5e_open_locked(priv->ifp);
354 case MLX5_PARAM_OFFSET(cqe_zipping):
355 /* network interface must be down */
357 mlx5e_close_locked(priv->ifp);
359 /* import CQE zipping mode */
360 if (priv->params_ethtool.cqe_zipping &&
361 MLX5_CAP_GEN(priv->mdev, cqe_compression)) {
362 priv->params.cqe_zipping_en = true;
363 priv->params_ethtool.cqe_zipping = 1;
365 priv->params.cqe_zipping_en = false;
366 priv->params_ethtool.cqe_zipping = 0;
368 /* restart network interface, if any */
370 mlx5e_open_locked(priv->ifp);
373 case MLX5_PARAM_OFFSET(tx_bufring_disable):
374 /* rangecheck input value */
375 priv->params_ethtool.tx_bufring_disable =
376 priv->params_ethtool.tx_bufring_disable ? 1 : 0;
378 /* reconfigure the sendqueues, if any */
380 mlx5e_close_locked(priv->ifp);
381 mlx5e_open_locked(priv->ifp);
385 case MLX5_PARAM_OFFSET(tx_completion_fact):
386 /* network interface must be down */
388 mlx5e_close_locked(priv->ifp);
390 /* verify parameter */
391 mlx5e_ethtool_sync_tx_completion_fact(priv);
393 /* restart network interface, if any */
395 mlx5e_open_locked(priv->ifp);
398 case MLX5_PARAM_OFFSET(diag_pci_enable):
399 priv->params_ethtool.diag_pci_enable =
400 priv->params_ethtool.diag_pci_enable ? 1 : 0;
402 error = -mlx5_core_set_diagnostics_full(priv->mdev,
403 priv->params_ethtool.diag_pci_enable,
404 priv->params_ethtool.diag_general_enable);
407 case MLX5_PARAM_OFFSET(diag_general_enable):
408 priv->params_ethtool.diag_general_enable =
409 priv->params_ethtool.diag_general_enable ? 1 : 0;
411 error = -mlx5_core_set_diagnostics_full(priv->mdev,
412 priv->params_ethtool.diag_pci_enable,
413 priv->params_ethtool.diag_general_enable);
425 * Read the first three bytes of the eeprom in order to get the needed info
426 * for the whole reading.
427 * Byte 0 - Identifier byte
428 * Byte 1 - Revision byte
429 * Byte 2 - Status byte
432 mlx5e_get_eeprom_info(struct mlx5e_priv *priv, struct mlx5e_eeprom *eeprom)
434 struct mlx5_core_dev *dev = priv->mdev;
439 ret = mlx5_query_module_num(dev, &eeprom->module_num);
441 if_printf(priv->ifp, "%s:%d: Failed query module error=%d\n",
442 __func__, __LINE__, ret);
446 /* Read the first three bytes to get Identifier, Revision and Status */
447 ret = mlx5_query_eeprom(dev, eeprom->i2c_addr, eeprom->page_num,
448 eeprom->device_addr, MLX5E_EEPROM_INFO_BYTES, eeprom->module_num, &data,
451 if_printf(priv->ifp, "%s:%d: Failed query eeprom module error=0x%x\n",
452 __func__, __LINE__, ret);
456 switch (data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) {
457 case SFF_8024_ID_QSFP:
458 eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
459 eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
461 case SFF_8024_ID_QSFPPLUS:
462 case SFF_8024_ID_QSFP28:
463 if ((data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) == SFF_8024_ID_QSFP28 ||
464 ((data & MLX5_EEPROM_REVISION_ID_BYTE_MASK) >> 8) >= 0x3) {
465 eeprom->type = MLX5E_ETH_MODULE_SFF_8636;
466 eeprom->len = MLX5E_ETH_MODULE_SFF_8636_LEN;
468 eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
469 eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
471 if ((data & MLX5_EEPROM_PAGE_3_VALID_BIT_MASK) == 0)
472 eeprom->page_valid = 1;
474 case SFF_8024_ID_SFP:
475 eeprom->type = MLX5E_ETH_MODULE_SFF_8472;
476 eeprom->len = MLX5E_ETH_MODULE_SFF_8472_LEN;
479 if_printf(priv->ifp, "%s:%d: Not recognized cable type = 0x%x(%s)\n",
480 __func__, __LINE__, data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK,
481 sff_8024_id[data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK]);
487 /* Read both low and high pages of the eeprom */
489 mlx5e_get_eeprom(struct mlx5e_priv *priv, struct mlx5e_eeprom *ee)
491 struct mlx5_core_dev *dev = priv->mdev;
498 /* Read low page of the eeprom */
499 while (ee->device_addr < ee->len) {
500 ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num, ee->device_addr,
501 ee->len - ee->device_addr, ee->module_num,
502 ee->data + (ee->device_addr / 4), &size_read);
504 if_printf(priv->ifp, "%s:%d: Failed reading eeprom, "
505 "error = 0x%02x\n", __func__, __LINE__, ret);
508 ee->device_addr += size_read;
511 /* Read high page of the eeprom */
512 if (ee->page_valid) {
513 ee->device_addr = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
514 ee->page_num = MLX5E_EEPROM_HIGH_PAGE;
516 while (ee->device_addr < MLX5E_EEPROM_PAGE_LENGTH) {
517 ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num,
518 ee->device_addr, MLX5E_EEPROM_PAGE_LENGTH - ee->device_addr,
519 ee->module_num, ee->data + (ee->len / 4) +
520 ((ee->device_addr - MLX5E_EEPROM_HIGH_PAGE_OFFSET) / 4),
523 if_printf(priv->ifp, "%s:%d: Failed reading eeprom, "
524 "error = 0x%02x\n", __func__, __LINE__, ret);
527 ee->device_addr += size_read;
534 mlx5e_print_eeprom(struct mlx5e_eeprom *eeprom)
538 int byte_to_write = 0;
539 int line_length = 16;
541 printf("\nOffset\t\tValues\n");
542 printf("------\t\t------");
543 while (byte_to_write < eeprom->len) {
544 printf("\n0x%04X\t\t", byte_to_write);
545 for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
546 printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
551 if (eeprom->page_valid) {
552 row = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
553 printf("\n\nUpper Page 0x03\n");
554 printf("\nOffset\t\tValues\n");
555 printf("------\t\t------");
556 while (row < MLX5E_EEPROM_PAGE_LENGTH) {
557 printf("\n0x%04X\t\t", row);
558 for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
559 printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
568 * Read cable EEPROM module information by first inspecting the first
569 * three bytes to get the initial information for a whole reading.
570 * Information will be printed to dmesg.
573 mlx5e_read_eeprom(SYSCTL_HANDLER_ARGS)
575 struct mlx5e_priv *priv = arg1;
576 struct mlx5e_eeprom eeprom;
581 error = sysctl_handle_int(oidp, &result, 0, req);
582 if (error || !req->newptr)
585 /* Check if device is gone */
592 eeprom.i2c_addr = MLX5E_I2C_ADDR_LOW;
593 eeprom.device_addr = 0;
594 eeprom.page_num = MLX5E_EEPROM_LOW_PAGE;
595 eeprom.page_valid = 0;
597 /* Read three first bytes to get important info */
598 error = mlx5e_get_eeprom_info(priv, &eeprom);
600 if_printf(priv->ifp, "%s:%d: Failed reading eeprom's "
601 "initial information\n", __func__, __LINE__);
606 * Allocate needed length buffer and additional space for
609 eeprom.data = malloc(eeprom.len + MLX5E_EEPROM_PAGE_LENGTH,
610 M_MLX5EN, M_WAITOK | M_ZERO);
612 /* Read the whole eeprom information */
613 error = mlx5e_get_eeprom(priv, &eeprom);
615 if_printf(priv->ifp, "%s:%d: Failed reading eeprom\n",
619 * Continue printing partial information in case of
623 mlx5e_print_eeprom(&eeprom);
624 free(eeprom.data, M_MLX5EN);
631 static const char *mlx5e_params_desc[] = {
632 MLX5E_PARAMS(MLX5E_STATS_DESC)
635 static const char *mlx5e_port_stats_debug_desc[] = {
636 MLX5E_PORT_STATS_DEBUG(MLX5E_STATS_DESC)
640 mlx5e_ethtool_debug_stats(SYSCTL_HANDLER_ARGS)
642 struct mlx5e_priv *priv = arg1;
646 sys_debug = priv->sysctl_debug;
647 error = sysctl_handle_int(oidp, &priv->sysctl_debug, 0, req);
648 if (error || !req->newptr)
650 priv->sysctl_debug = !!priv->sysctl_debug;
651 if (sys_debug == priv->sysctl_debug)
653 if (priv->sysctl_debug)
654 mlx5e_create_stats(&priv->stats.port_stats_debug.ctx,
655 SYSCTL_CHILDREN(priv->sysctl_ifnet), "debug_stats",
656 mlx5e_port_stats_debug_desc, MLX5E_PORT_STATS_DEBUG_NUM,
657 priv->stats.port_stats_debug.arg);
659 sysctl_ctx_free(&priv->stats.port_stats_debug.ctx);
664 mlx5e_create_diagnostics(struct mlx5e_priv *priv)
666 struct mlx5_core_diagnostics_entry entry;
667 struct sysctl_ctx_list *ctx;
668 struct sysctl_oid *node;
671 /* sysctl context we are using */
672 ctx = &priv->sysctl_ctx;
674 /* create root node */
675 node = SYSCTL_ADD_NODE(ctx,
676 SYSCTL_CHILDREN(priv->sysctl_ifnet), OID_AUTO,
677 "diagnostics", CTLFLAG_RD, NULL, "Diagnostics");
681 /* create PCI diagnostics */
682 for (x = 0; x != MLX5_CORE_PCI_DIAGNOSTICS_NUM; x++) {
683 entry = mlx5_core_pci_diagnostics_table[x];
684 if (mlx5_core_supports_diagnostics(priv->mdev, entry.counter_id) == 0)
686 SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
687 entry.desc, CTLFLAG_RD, priv->params_pci.array + x,
688 "PCI diagnostics counter");
691 /* create general diagnostics */
692 for (x = 0; x != MLX5_CORE_GENERAL_DIAGNOSTICS_NUM; x++) {
693 entry = mlx5_core_general_diagnostics_table[x];
694 if (mlx5_core_supports_diagnostics(priv->mdev, entry.counter_id) == 0)
696 SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
697 entry.desc, CTLFLAG_RD, priv->params_general.array + x,
698 "General diagnostics counter");
703 mlx5e_create_ethtool(struct mlx5e_priv *priv)
705 struct sysctl_oid *node;
706 const char *pnameunit;
709 /* set some defaults */
710 priv->params_ethtool.tx_queue_size_max = 1 << MLX5E_PARAMS_MAXIMUM_LOG_SQ_SIZE;
711 priv->params_ethtool.rx_queue_size_max = 1 << MLX5E_PARAMS_MAXIMUM_LOG_RQ_SIZE;
712 priv->params_ethtool.tx_queue_size = 1 << priv->params.log_sq_size;
713 priv->params_ethtool.rx_queue_size = 1 << priv->params.log_rq_size;
714 priv->params_ethtool.channels = priv->params.num_channels;
715 priv->params_ethtool.channels_rsss = priv->params.channels_rsss;
716 priv->params_ethtool.coalesce_pkts_max = MLX5E_FLD_MAX(cqc, cq_max_count);
717 priv->params_ethtool.coalesce_usecs_max = MLX5E_FLD_MAX(cqc, cq_period);
718 priv->params_ethtool.rx_coalesce_mode = priv->params.rx_cq_moderation_mode;
719 priv->params_ethtool.rx_coalesce_usecs = priv->params.rx_cq_moderation_usec;
720 priv->params_ethtool.rx_coalesce_pkts = priv->params.rx_cq_moderation_pkts;
721 priv->params_ethtool.tx_coalesce_mode = priv->params.tx_cq_moderation_mode;
722 priv->params_ethtool.tx_coalesce_usecs = priv->params.tx_cq_moderation_usec;
723 priv->params_ethtool.tx_coalesce_pkts = priv->params.tx_cq_moderation_pkts;
724 priv->params_ethtool.hw_lro = priv->params.hw_lro_en;
725 priv->params_ethtool.cqe_zipping = priv->params.cqe_zipping_en;
726 mlx5e_ethtool_sync_tx_completion_fact(priv);
728 /* create root node */
729 node = SYSCTL_ADD_NODE(&priv->sysctl_ctx,
730 SYSCTL_CHILDREN(priv->sysctl_ifnet), OID_AUTO,
731 "conf", CTLFLAG_RW, NULL, "Configuration");
734 for (x = 0; x != MLX5E_PARAMS_NUM; x++) {
735 /* check for read-only parameter */
736 if (strstr(mlx5e_params_desc[2 * x], "_max") != NULL ||
737 strstr(mlx5e_params_desc[2 * x], "_mtu") != NULL) {
738 SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
739 mlx5e_params_desc[2 * x], CTLTYPE_U64 | CTLFLAG_RD |
740 CTLFLAG_MPSAFE, priv, x, &mlx5e_ethtool_handler, "QU",
741 mlx5e_params_desc[2 * x + 1]);
743 #if (__FreeBSD_version < 1100000)
747 * NOTE: In FreeBSD-11 and newer the
748 * CTLFLAG_RWTUN flag will take care of
749 * loading default sysctl value from the
750 * kernel environment, if any:
752 SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
753 mlx5e_params_desc[2 * x], CTLTYPE_U64 | CTLFLAG_RWTUN |
754 CTLFLAG_MPSAFE, priv, x, &mlx5e_ethtool_handler, "QU",
755 mlx5e_params_desc[2 * x + 1]);
757 #if (__FreeBSD_version < 1100000)
758 /* compute path for sysctl */
759 snprintf(path, sizeof(path), "dev.mce.%d.conf.%s",
760 device_get_unit(priv->mdev->pdev->dev.bsddev),
761 mlx5e_params_desc[2 * x]);
763 /* try to fetch tunable, if any */
764 if (TUNABLE_QUAD_FETCH(path, &priv->params_ethtool.arg[x]))
765 mlx5e_ethtool_handler(NULL, priv, x, NULL);
770 SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
771 "debug_stats", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, priv,
772 0, &mlx5e_ethtool_debug_stats, "I", "Extended debug statistics");
774 pnameunit = device_get_nameunit(priv->mdev->pdev->dev.bsddev);
776 SYSCTL_ADD_STRING(&priv->sysctl_ctx, SYSCTL_CHILDREN(node),
777 OID_AUTO, "device_name", CTLFLAG_RD,
778 __DECONST(void *, pnameunit), 0,
782 SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO, "eeprom_info",
783 CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, priv, 0,
784 mlx5e_read_eeprom, "I", "EEPROM information");
786 /* Diagnostics support */
787 mlx5e_create_diagnostics(priv);