]> CyberLeo.Net >> Repos - FreeBSD/stable/10.git/blob - sys/dev/sfxge/common/medford_nic.c
MFC r310715
[FreeBSD/stable/10.git] / sys / dev / sfxge / common / medford_nic.c
1 /*-
2  * Copyright (c) 2015-2016 Solarflare Communications Inc.
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright notice,
9  *    this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright notice,
11  *    this list of conditions and the following disclaimer in the documentation
12  *    and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
15  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
16  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
17  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
18  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
19  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
20  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
21  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
22  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
23  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
24  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  *
26  * The views and conclusions contained in the software and documentation are
27  * those of the authors and should not be interpreted as representing official
28  * policies, either expressed or implied, of the FreeBSD Project.
29  */
30
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD$");
33
34 #include "efx.h"
35 #include "efx_impl.h"
36
37
38 #if EFSYS_OPT_MEDFORD
39
40 static  __checkReturn   efx_rc_t
41 efx_mcdi_get_rxdp_config(
42         __in            efx_nic_t *enp,
43         __out           uint32_t *end_paddingp)
44 {
45         efx_mcdi_req_t req;
46         uint8_t payload[MAX(MC_CMD_GET_RXDP_CONFIG_IN_LEN,
47                             MC_CMD_GET_RXDP_CONFIG_OUT_LEN)];
48         uint32_t end_padding;
49         efx_rc_t rc;
50
51         memset(payload, 0, sizeof (payload));
52         req.emr_cmd = MC_CMD_GET_RXDP_CONFIG;
53         req.emr_in_buf = payload;
54         req.emr_in_length = MC_CMD_GET_RXDP_CONFIG_IN_LEN;
55         req.emr_out_buf = payload;
56         req.emr_out_length = MC_CMD_GET_RXDP_CONFIG_OUT_LEN;
57
58         efx_mcdi_execute(enp, &req);
59         if (req.emr_rc != 0) {
60                 rc = req.emr_rc;
61                 goto fail1;
62         }
63
64         if (MCDI_OUT_DWORD_FIELD(req, GET_RXDP_CONFIG_OUT_DATA,
65                                     GET_RXDP_CONFIG_OUT_PAD_HOST_DMA) == 0) {
66                 /* RX DMA end padding is disabled */
67                 end_padding = 0;
68         } else {
69                 switch (MCDI_OUT_DWORD_FIELD(req, GET_RXDP_CONFIG_OUT_DATA,
70                                             GET_RXDP_CONFIG_OUT_PAD_HOST_LEN)) {
71                 case MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_64:
72                         end_padding = 64;
73                         break;
74                 case MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_128:
75                         end_padding = 128;
76                         break;
77                 case MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_256:
78                         end_padding = 256;
79                         break;
80                 default:
81                         rc = ENOTSUP;
82                         goto fail2;
83                 }
84         }
85
86         *end_paddingp = end_padding;
87
88         return (0);
89
90 fail2:
91         EFSYS_PROBE(fail2);
92 fail1:
93         EFSYS_PROBE1(fail1, efx_rc_t, rc);
94
95         return (rc);
96 }
97
98 static  __checkReturn   efx_rc_t
99 medford_nic_get_required_pcie_bandwidth(
100         __in            efx_nic_t *enp,
101         __out           uint32_t *bandwidth_mbpsp)
102 {
103         uint32_t port_modes;
104         uint32_t current_mode;
105         uint32_t bandwidth;
106         efx_rc_t rc;
107
108         if ((rc = efx_mcdi_get_port_modes(enp, &port_modes,
109                                     &current_mode)) != 0) {
110                 /* No port mode info available. */
111                 bandwidth = 0;
112                 goto out;
113         }
114
115         if ((rc = ef10_nic_get_port_mode_bandwidth(current_mode,
116                                                     &bandwidth)) != 0)
117                 goto fail1;
118
119 out:
120         *bandwidth_mbpsp = bandwidth;
121
122         return (0);
123
124 fail1:
125         EFSYS_PROBE1(fail1, efx_rc_t, rc);
126
127         return (rc);
128 }
129
130         __checkReturn   efx_rc_t
131 medford_board_cfg(
132         __in            efx_nic_t *enp)
133 {
134         efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
135         efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
136         uint8_t mac_addr[6] = { 0 };
137         uint32_t board_type = 0;
138         ef10_link_state_t els;
139         efx_port_t *epp = &(enp->en_port);
140         uint32_t port;
141         uint32_t pf;
142         uint32_t vf;
143         uint32_t mask;
144         uint32_t sysclk, dpcpu_clk;
145         uint32_t base, nvec;
146         uint32_t end_padding;
147         uint32_t bandwidth;
148         efx_rc_t rc;
149
150         /*
151          * FIXME: Likely to be incomplete and incorrect.
152          * Parts of this should be shared with Huntington.
153          */
154
155         if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
156                 goto fail1;
157
158         /*
159          * NOTE: The MCDI protocol numbers ports from zero.
160          * The common code MCDI interface numbers ports from one.
161          */
162         emip->emi_port = port + 1;
163
164         if ((rc = ef10_external_port_mapping(enp, port,
165                     &encp->enc_external_port)) != 0)
166                 goto fail2;
167
168         /*
169          * Get PCIe function number from firmware (used for
170          * per-function privilege and dynamic config info).
171          *  - PCIe PF: pf = PF number, vf = 0xffff.
172          *  - PCIe VF: pf = parent PF, vf = VF number.
173          */
174         if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
175                 goto fail3;
176
177         encp->enc_pf = pf;
178         encp->enc_vf = vf;
179
180         /* MAC address for this function */
181         if (EFX_PCI_FUNCTION_IS_PF(encp)) {
182                 rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
183 #if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
184                 /* Disable static config checking for Medford NICs, ONLY
185                  * for manufacturing test and setup at the factory, to
186                  * allow the static config to be installed.
187                  */
188 #else /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
189                 if ((rc == 0) && (mac_addr[0] & 0x02)) {
190                         /*
191                          * If the static config does not include a global MAC
192                          * address pool then the board may return a locally
193                          * administered MAC address (this should only happen on
194                          * incorrectly programmed boards).
195                          */
196                         rc = EINVAL;
197                 }
198 #endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
199         } else {
200                 rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
201         }
202         if (rc != 0)
203                 goto fail4;
204
205         EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
206
207         /* Board configuration */
208         rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
209         if (rc != 0) {
210                 /* Unprivileged functions may not be able to read board cfg */
211                 if (rc == EACCES)
212                         board_type = 0;
213                 else
214                         goto fail5;
215         }
216
217         encp->enc_board_type = board_type;
218         encp->enc_clk_mult = 1; /* not used for Medford */
219
220         /* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
221         if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
222                 goto fail6;
223
224         /* Obtain the default PHY advertised capabilities */
225         if ((rc = ef10_phy_get_link(enp, &els)) != 0)
226                 goto fail7;
227         epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
228         epp->ep_adv_cap_mask = els.els_adv_cap_mask;
229
230         /*
231          * Enable firmware workarounds for hardware errata.
232          * Expected responses are:
233          *  - 0 (zero):
234          *      Success: workaround enabled or disabled as requested.
235          *  - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
236          *      Firmware does not support the MC_CMD_WORKAROUND request.
237          *      (assume that the workaround is not supported).
238          *  - MC_CMD_ERR_ENOENT (reported as ENOENT):
239          *      Firmware does not support the requested workaround.
240          *  - MC_CMD_ERR_EPERM  (reported as EACCES):
241          *      Unprivileged function cannot enable/disable workarounds.
242          *
243          * See efx_mcdi_request_errcode() for MCDI error translations.
244          */
245
246
247         if (EFX_PCI_FUNCTION_IS_VF(encp)) {
248                 /*
249                  * Interrupt testing does not work for VFs. See bug50084.
250                  * FIXME: Does this still  apply to Medford?
251                  */
252                 encp->enc_bug41750_workaround = B_TRUE;
253         }
254
255         /* Chained multicast is always enabled on Medford */
256         encp->enc_bug26807_workaround = B_TRUE;
257
258         /*
259          * If the bug61265 workaround is enabled, then interrupt holdoff timers
260          * cannot be controlled by timer table writes, so MCDI must be used
261          * (timer table writes can still be used for wakeup timers).
262          */
263         rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG61265, B_TRUE,
264             NULL);
265         if ((rc == 0) || (rc == EACCES))
266                 encp->enc_bug61265_workaround = B_TRUE;
267         else if ((rc == ENOTSUP) || (rc == ENOENT))
268                 encp->enc_bug61265_workaround = B_FALSE;
269         else
270                 goto fail8;
271
272         /* Get clock frequencies (in MHz). */
273         if ((rc = efx_mcdi_get_clock(enp, &sysclk, &dpcpu_clk)) != 0)
274                 goto fail9;
275
276         /*
277          * The Medford timer quantum is 1536 dpcpu_clk cycles, documented for
278          * the EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
279          */
280         encp->enc_evq_timer_quantum_ns = 1536000UL / dpcpu_clk; /* 1536 cycles */
281         encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
282                     FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
283
284         /* Check capabilities of running datapath firmware */
285         if ((rc = ef10_get_datapath_caps(enp)) != 0)
286                 goto fail10;
287
288         /* Alignment for receive packet DMA buffers */
289         encp->enc_rx_buf_align_start = 1;
290
291         /* Get the RX DMA end padding alignment configuration */
292         if ((rc = efx_mcdi_get_rxdp_config(enp, &end_padding)) != 0) {
293                 if (rc != EACCES)
294                         goto fail11;
295
296                 /* Assume largest tail padding size supported by hardware */
297                 end_padding = 256;
298         }
299         encp->enc_rx_buf_align_end = end_padding;
300
301         /* Alignment for WPTR updates */
302         encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
303
304         /*
305          * Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
306          * MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
307          * resources (allocated to this PCIe function), which is zero until
308          * after we have allocated VIs.
309          */
310         encp->enc_evq_limit = 1024;
311         encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
312         encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
313
314         encp->enc_buftbl_limit = 0xFFFFFFFF;
315
316         encp->enc_piobuf_limit = MEDFORD_PIOBUF_NBUFS;
317         encp->enc_piobuf_size = MEDFORD_PIOBUF_SIZE;
318         encp->enc_piobuf_min_alloc_size = MEDFORD_MIN_PIO_ALLOC_SIZE;
319
320         /*
321          * Get the current privilege mask. Note that this may be modified
322          * dynamically, so this value is informational only. DO NOT use
323          * the privilege mask to check for sufficient privileges, as that
324          * can result in time-of-check/time-of-use bugs.
325          */
326         if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
327                 goto fail12;
328         encp->enc_privilege_mask = mask;
329
330         /* Get interrupt vector limits */
331         if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
332                 if (EFX_PCI_FUNCTION_IS_PF(encp))
333                         goto fail13;
334
335                 /* Ignore error (cannot query vector limits from a VF). */
336                 base = 0;
337                 nvec = 1024;
338         }
339         encp->enc_intr_vec_base = base;
340         encp->enc_intr_limit = nvec;
341
342         /*
343          * Maximum number of bytes into the frame the TCP header can start for
344          * firmware assisted TSO to work.
345          */
346         encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
347
348         /*
349          * Medford stores a single global copy of VPD, not per-PF as on
350          * Huntington.
351          */
352         encp->enc_vpd_is_global = B_TRUE;
353
354         rc = medford_nic_get_required_pcie_bandwidth(enp, &bandwidth);
355         if (rc != 0)
356                 goto fail14;
357         encp->enc_required_pcie_bandwidth_mbps = bandwidth;
358         encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;
359
360         return (0);
361
362 fail14:
363         EFSYS_PROBE(fail14);
364 fail13:
365         EFSYS_PROBE(fail13);
366 fail12:
367         EFSYS_PROBE(fail12);
368 fail11:
369         EFSYS_PROBE(fail11);
370 fail10:
371         EFSYS_PROBE(fail10);
372 fail9:
373         EFSYS_PROBE(fail9);
374 fail8:
375         EFSYS_PROBE(fail8);
376 fail7:
377         EFSYS_PROBE(fail7);
378 fail6:
379         EFSYS_PROBE(fail6);
380 fail5:
381         EFSYS_PROBE(fail5);
382 fail4:
383         EFSYS_PROBE(fail4);
384 fail3:
385         EFSYS_PROBE(fail3);
386 fail2:
387         EFSYS_PROBE(fail2);
388 fail1:
389         EFSYS_PROBE1(fail1, efx_rc_t, rc);
390
391         return (rc);
392 }
393
394 #endif  /* EFSYS_OPT_MEDFORD */