2 * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
30 #include <sys/param.h>
31 #include <sys/module.h>
32 #include <sys/systm.h>
33 #include <sys/kernel.h>
36 #include <sys/endian.h>
37 #include <sys/malloc.h>
39 #include <sys/mutex.h>
41 #include <sys/taskqueue.h>
43 #include <machine/stdarg.h>
44 #include <machine/resource.h>
45 #include <machine/bus.h>
47 #include <dev/pci/pcivar.h>
48 #include <dev/pci/pcireg.h>
52 #include <cam/cam_ccb.h>
53 #include <cam/cam_sim.h>
54 #include <cam/cam_xpt_sim.h>
55 #include <cam/cam_debug.h>
57 /* local prototypes */
58 static int siis_setup_interrupt(device_t dev);
59 static void siis_intr(void *data);
60 static int siis_suspend(device_t dev);
61 static int siis_resume(device_t dev);
62 static int siis_ch_init(device_t dev);
63 static int siis_ch_deinit(device_t dev);
64 static int siis_ch_suspend(device_t dev);
65 static int siis_ch_resume(device_t dev);
66 static void siis_ch_intr_locked(void *data);
67 static void siis_ch_intr(void *data);
68 static void siis_begin_transaction(device_t dev, union ccb *ccb);
69 static void siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error);
70 static void siis_execute_transaction(struct siis_slot *slot);
71 static void siis_timeout(struct siis_slot *slot);
72 static void siis_end_transaction(struct siis_slot *slot, enum siis_err_type et);
73 static int siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag);
74 static void siis_dmainit(device_t dev);
75 static void siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error);
76 static void siis_dmafini(device_t dev);
77 static void siis_slotsalloc(device_t dev);
78 static void siis_slotsfree(device_t dev);
79 static void siis_reset(device_t dev);
80 static void siis_portinit(device_t dev);
81 static int siis_wait_ready(device_t dev, int t);
83 static int siis_sata_connect(struct siis_channel *ch);
85 static void siis_issue_read_log(device_t dev);
86 static void siis_process_read_log(device_t dev, union ccb *ccb);
88 static void siisaction(struct cam_sim *sim, union ccb *ccb);
89 static void siispoll(struct cam_sim *sim);
91 MALLOC_DEFINE(M_SIIS, "SIIS driver", "SIIS driver data buffers");
99 #define SIIS_Q_NOMSI 2
101 {0x31241095, "SiI3124", 4, 0},
102 {0x31248086, "SiI3124", 4, 0},
103 {0x31321095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI},
104 {0x02421095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI},
105 {0x02441095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI},
106 {0x31311095, "SiI3131", 1, SIIS_Q_SNTF|SIIS_Q_NOMSI},
107 {0x35311095, "SiI3531", 1, SIIS_Q_SNTF|SIIS_Q_NOMSI},
112 siis_probe(device_t dev)
116 uint32_t devid = pci_get_devid(dev);
118 for (i = 0; siis_ids[i].id != 0; i++) {
119 if (siis_ids[i].id == devid) {
120 snprintf(buf, sizeof(buf), "%s SATA controller",
122 device_set_desc_copy(dev, buf);
123 return (BUS_PROBE_VENDOR);
130 siis_attach(device_t dev)
132 struct siis_controller *ctlr = device_get_softc(dev);
133 uint32_t devid = pci_get_devid(dev);
138 for (i = 0; siis_ids[i].id != 0; i++) {
139 if (siis_ids[i].id == devid)
142 ctlr->quirks = siis_ids[i].quirks;
144 ctlr->r_grid = PCIR_BAR(0);
145 if (!(ctlr->r_gmem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
146 &ctlr->r_grid, RF_ACTIVE)))
148 ctlr->gctl = ATA_INL(ctlr->r_gmem, SIIS_GCTL);
149 /* Channels memory */
150 ctlr->r_rid = PCIR_BAR(2);
151 if (!(ctlr->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
152 &ctlr->r_rid, RF_ACTIVE)))
154 /* Setup our own memory management for channels. */
155 ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem);
156 ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem);
157 ctlr->sc_iomem.rm_type = RMAN_ARRAY;
158 ctlr->sc_iomem.rm_descr = "I/O memory addresses";
159 if ((error = rman_init(&ctlr->sc_iomem)) != 0) {
160 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
161 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
164 if ((error = rman_manage_region(&ctlr->sc_iomem,
165 rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) {
166 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
167 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
168 rman_fini(&ctlr->sc_iomem);
171 pci_enable_busmaster(dev);
172 /* Reset controller */
174 /* Number of HW channels */
175 ctlr->channels = siis_ids[i].ports;
176 /* Setup interrupts. */
177 if (siis_setup_interrupt(dev)) {
178 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
179 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
180 rman_fini(&ctlr->sc_iomem);
183 /* Attach all channels on this controller */
184 for (unit = 0; unit < ctlr->channels; unit++) {
185 child = device_add_child(dev, "siisch", -1);
187 device_printf(dev, "failed to add channel device\n");
189 device_set_ivars(child, (void *)(intptr_t)unit);
191 bus_generic_attach(dev);
196 siis_detach(device_t dev)
198 struct siis_controller *ctlr = device_get_softc(dev);
202 /* Detach & delete all children */
203 if (!device_get_children(dev, &children, &nchildren)) {
204 for (i = 0; i < nchildren; i++)
205 device_delete_child(dev, children[i]);
206 free(children, M_TEMP);
208 /* Free interrupts. */
209 if (ctlr->irq.r_irq) {
210 bus_teardown_intr(dev, ctlr->irq.r_irq,
212 bus_release_resource(dev, SYS_RES_IRQ,
213 ctlr->irq.r_irq_rid, ctlr->irq.r_irq);
215 pci_release_msi(dev);
217 rman_fini(&ctlr->sc_iomem);
218 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
219 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
224 siis_suspend(device_t dev)
226 struct siis_controller *ctlr = device_get_softc(dev);
228 bus_generic_suspend(dev);
229 /* Put controller into reset state. */
230 ctlr->gctl |= SIIS_GCTL_GRESET;
231 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl);
236 siis_resume(device_t dev)
238 struct siis_controller *ctlr = device_get_softc(dev);
240 /* Set PCIe max read request size to at least 1024 bytes */
241 if (pci_get_max_read_req(dev) < 1024)
242 pci_set_max_read_req(dev, 1024);
243 /* Put controller into reset state. */
244 ctlr->gctl |= SIIS_GCTL_GRESET;
245 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl);
247 /* Get controller out of reset state and enable port interrupts. */
248 ctlr->gctl &= ~(SIIS_GCTL_GRESET | SIIS_GCTL_I2C_IE);
249 ctlr->gctl |= 0x0000000f;
250 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl);
251 return (bus_generic_resume(dev));
255 siis_setup_interrupt(device_t dev)
257 struct siis_controller *ctlr = device_get_softc(dev);
258 int msi = ctlr->quirks & SIIS_Q_NOMSI ? 0 : 1;
261 resource_int_value(device_get_name(dev),
262 device_get_unit(dev), "msi", &msi);
266 msi = min(1, pci_msi_count(dev));
267 /* Allocate MSI if needed/present. */
268 if (msi && pci_alloc_msi(dev, &msi) != 0)
270 /* Allocate all IRQs. */
271 ctlr->irq.r_irq_rid = msi ? 1 : 0;
272 if (!(ctlr->irq.r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
273 &ctlr->irq.r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) {
274 device_printf(dev, "unable to map interrupt\n");
277 if ((bus_setup_intr(dev, ctlr->irq.r_irq, ATA_INTR_FLAGS, NULL,
278 siis_intr, ctlr, &ctlr->irq.handle))) {
279 /* SOS XXX release r_irq */
280 device_printf(dev, "unable to setup interrupt\n");
287 * Common case interrupt handler.
290 siis_intr(void *data)
292 struct siis_controller *ctlr = (struct siis_controller *)data;
297 is = ATA_INL(ctlr->r_gmem, SIIS_IS);
298 for (unit = 0; unit < ctlr->channels; unit++) {
299 if ((is & SIIS_IS_PORT(unit)) != 0 &&
300 (arg = ctlr->interrupt[unit].argument)) {
301 ctlr->interrupt[unit].function(arg);
304 /* Acknowledge interrupt, if MSI enabled. */
305 if (ctlr->irq.r_irq_rid) {
306 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL,
307 ctlr->gctl | SIIS_GCTL_MSIACK);
311 static struct resource *
312 siis_alloc_resource(device_t dev, device_t child, int type, int *rid,
313 u_long start, u_long end, u_long count, u_int flags)
315 struct siis_controller *ctlr = device_get_softc(dev);
316 int unit = ((struct siis_channel *)device_get_softc(child))->unit;
317 struct resource *res = NULL;
318 int offset = unit << 13;
323 st = rman_get_start(ctlr->r_mem);
324 res = rman_reserve_resource(&ctlr->sc_iomem, st + offset,
325 st + offset + 0x2000, 0x2000, RF_ACTIVE, child);
327 bus_space_handle_t bsh;
329 bsh = rman_get_bushandle(ctlr->r_mem);
330 bst = rman_get_bustag(ctlr->r_mem);
331 bus_space_subregion(bst, bsh, offset, 0x2000, &bsh);
332 rman_set_bushandle(res, bsh);
333 rman_set_bustag(res, bst);
337 if (*rid == ATA_IRQ_RID)
338 res = ctlr->irq.r_irq;
345 siis_release_resource(device_t dev, device_t child, int type, int rid,
351 rman_release_resource(r);
354 if (rid != ATA_IRQ_RID)
362 siis_setup_intr(device_t dev, device_t child, struct resource *irq,
363 int flags, driver_filter_t *filter, driver_intr_t *function,
364 void *argument, void **cookiep)
366 struct siis_controller *ctlr = device_get_softc(dev);
367 int unit = (intptr_t)device_get_ivars(child);
369 if (filter != NULL) {
370 printf("siis.c: we cannot use a filter here\n");
373 ctlr->interrupt[unit].function = function;
374 ctlr->interrupt[unit].argument = argument;
379 siis_teardown_intr(device_t dev, device_t child, struct resource *irq,
382 struct siis_controller *ctlr = device_get_softc(dev);
383 int unit = (intptr_t)device_get_ivars(child);
385 ctlr->interrupt[unit].function = NULL;
386 ctlr->interrupt[unit].argument = NULL;
391 siis_print_child(device_t dev, device_t child)
395 retval = bus_print_child_header(dev, child);
396 retval += printf(" at channel %d",
397 (int)(intptr_t)device_get_ivars(child));
398 retval += bus_print_child_footer(dev, child);
404 siis_child_location_str(device_t dev, device_t child, char *buf,
408 snprintf(buf, buflen, "channel=%d",
409 (int)(intptr_t)device_get_ivars(child));
413 devclass_t siis_devclass;
414 static device_method_t siis_methods[] = {
415 DEVMETHOD(device_probe, siis_probe),
416 DEVMETHOD(device_attach, siis_attach),
417 DEVMETHOD(device_detach, siis_detach),
418 DEVMETHOD(device_suspend, siis_suspend),
419 DEVMETHOD(device_resume, siis_resume),
420 DEVMETHOD(bus_print_child, siis_print_child),
421 DEVMETHOD(bus_alloc_resource, siis_alloc_resource),
422 DEVMETHOD(bus_release_resource, siis_release_resource),
423 DEVMETHOD(bus_setup_intr, siis_setup_intr),
424 DEVMETHOD(bus_teardown_intr,siis_teardown_intr),
425 DEVMETHOD(bus_child_location_str, siis_child_location_str),
428 static driver_t siis_driver = {
431 sizeof(struct siis_controller)
433 DRIVER_MODULE(siis, pci, siis_driver, siis_devclass, 0, 0);
434 MODULE_VERSION(siis, 1);
435 MODULE_DEPEND(siis, cam, 1, 1, 1);
438 siis_ch_probe(device_t dev)
441 device_set_desc_copy(dev, "SIIS channel");
446 siis_ch_attach(device_t dev)
448 struct siis_controller *ctlr = device_get_softc(device_get_parent(dev));
449 struct siis_channel *ch = device_get_softc(dev);
450 struct cam_devq *devq;
451 int rid, error, i, sata_rev = 0;
454 ch->unit = (intptr_t)device_get_ivars(dev);
455 ch->quirks = ctlr->quirks;
456 resource_int_value(device_get_name(dev),
457 device_get_unit(dev), "pm_level", &ch->pm_level);
458 resource_int_value(device_get_name(dev),
459 device_get_unit(dev), "sata_rev", &sata_rev);
460 for (i = 0; i < 16; i++) {
461 ch->user[i].revision = sata_rev;
462 ch->user[i].mode = 0;
463 ch->user[i].bytecount = 8192;
464 ch->user[i].tags = SIIS_MAX_SLOTS;
465 ch->curr[i] = ch->user[i];
467 ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ;
469 mtx_init(&ch->mtx, "SIIS channel lock", NULL, MTX_DEF);
471 if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
475 siis_slotsalloc(dev);
479 if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
480 &rid, RF_SHAREABLE | RF_ACTIVE))) {
481 device_printf(dev, "Unable to map interrupt\n");
485 if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL,
486 siis_ch_intr_locked, dev, &ch->ih))) {
487 device_printf(dev, "Unable to setup interrupt\n");
491 /* Create the device queue for our SIM. */
492 devq = cam_simq_alloc(SIIS_MAX_SLOTS);
494 device_printf(dev, "Unable to allocate simq\n");
498 /* Construct SIM entry */
499 ch->sim = cam_sim_alloc(siisaction, siispoll, "siisch", ch,
500 device_get_unit(dev), &ch->mtx, 2, SIIS_MAX_SLOTS, devq);
501 if (ch->sim == NULL) {
503 device_printf(dev, "unable to allocate sim\n");
507 if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) {
508 device_printf(dev, "unable to register xpt bus\n");
512 if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim),
513 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
514 device_printf(dev, "unable to create path\n");
518 mtx_unlock(&ch->mtx);
522 xpt_bus_deregister(cam_sim_path(ch->sim));
524 cam_sim_free(ch->sim, /*free_devq*/TRUE);
526 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
528 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
529 mtx_unlock(&ch->mtx);
534 siis_ch_detach(device_t dev)
536 struct siis_channel *ch = device_get_softc(dev);
539 xpt_async(AC_LOST_DEVICE, ch->path, NULL);
540 xpt_free_path(ch->path);
541 xpt_bus_deregister(cam_sim_path(ch->sim));
542 cam_sim_free(ch->sim, /*free_devq*/TRUE);
543 mtx_unlock(&ch->mtx);
545 bus_teardown_intr(dev, ch->r_irq, ch->ih);
546 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
552 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
553 mtx_destroy(&ch->mtx);
558 siis_ch_init(device_t dev)
560 struct siis_channel *ch = device_get_softc(dev);
562 /* Get port out of reset state. */
563 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET);
564 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT);
566 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME);
568 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME);
569 /* Enable port interrupts */
570 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED);
575 siis_ch_deinit(device_t dev)
577 struct siis_channel *ch = device_get_softc(dev);
579 /* Put port into reset state. */
580 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET);
585 siis_ch_suspend(device_t dev)
587 struct siis_channel *ch = device_get_softc(dev);
590 xpt_freeze_simq(ch->sim, 1);
592 msleep(ch, &ch->mtx, PRIBIO, "siissusp", hz/100);
594 mtx_unlock(&ch->mtx);
599 siis_ch_resume(device_t dev)
601 struct siis_channel *ch = device_get_softc(dev);
606 xpt_release_simq(ch->sim, TRUE);
607 mtx_unlock(&ch->mtx);
611 devclass_t siisch_devclass;
612 static device_method_t siisch_methods[] = {
613 DEVMETHOD(device_probe, siis_ch_probe),
614 DEVMETHOD(device_attach, siis_ch_attach),
615 DEVMETHOD(device_detach, siis_ch_detach),
616 DEVMETHOD(device_suspend, siis_ch_suspend),
617 DEVMETHOD(device_resume, siis_ch_resume),
620 static driver_t siisch_driver = {
623 sizeof(struct siis_channel)
625 DRIVER_MODULE(siisch, siis, siisch_driver, siis_devclass, 0, 0);
627 struct siis_dc_cb_args {
633 siis_dmainit(device_t dev)
635 struct siis_channel *ch = device_get_softc(dev);
636 struct siis_dc_cb_args dcba;
639 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0,
640 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
641 NULL, NULL, SIIS_WORK_SIZE, 1, SIIS_WORK_SIZE,
642 0, NULL, NULL, &ch->dma.work_tag))
644 if (bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 0,
647 if (bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work,
648 SIIS_WORK_SIZE, siis_dmasetupc_cb, &dcba, 0) || dcba.error) {
649 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
652 ch->dma.work_bus = dcba.maddr;
654 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
655 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
657 SIIS_SG_ENTRIES * PAGE_SIZE * SIIS_MAX_SLOTS,
658 SIIS_SG_ENTRIES, 0xFFFFFFFF,
659 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) {
665 device_printf(dev, "WARNING - DMA initialization failed\n");
670 siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
672 struct siis_dc_cb_args *dcba = (struct siis_dc_cb_args *)xsc;
674 if (!(dcba->error = error))
675 dcba->maddr = segs[0].ds_addr;
679 siis_dmafini(device_t dev)
681 struct siis_channel *ch = device_get_softc(dev);
683 if (ch->dma.data_tag) {
684 bus_dma_tag_destroy(ch->dma.data_tag);
685 ch->dma.data_tag = NULL;
687 if (ch->dma.work_bus) {
688 bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map);
689 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
690 ch->dma.work_bus = 0;
691 ch->dma.work_map = NULL;
694 if (ch->dma.work_tag) {
695 bus_dma_tag_destroy(ch->dma.work_tag);
696 ch->dma.work_tag = NULL;
701 siis_slotsalloc(device_t dev)
703 struct siis_channel *ch = device_get_softc(dev);
706 /* Alloc and setup command/dma slots */
707 bzero(ch->slot, sizeof(ch->slot));
708 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
709 struct siis_slot *slot = &ch->slot[i];
713 slot->state = SIIS_SLOT_EMPTY;
715 callout_init_mtx(&slot->timeout, &ch->mtx, 0);
717 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map))
718 device_printf(ch->dev, "FAILURE - create data_map\n");
723 siis_slotsfree(device_t dev)
725 struct siis_channel *ch = device_get_softc(dev);
728 /* Free all dma slots */
729 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
730 struct siis_slot *slot = &ch->slot[i];
732 callout_drain(&slot->timeout);
733 if (slot->dma.data_map) {
734 bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map);
735 slot->dma.data_map = NULL;
741 siis_notify_events(device_t dev)
743 struct siis_channel *ch = device_get_softc(dev);
744 struct cam_path *dpath;
748 if (ch->quirks & SIIS_Q_SNTF) {
749 status = ATA_INL(ch->r_mem, SIIS_P_SNTF);
750 ATA_OUTL(ch->r_mem, SIIS_P_SNTF, status);
753 * Without SNTF we have no idea which device sent notification.
754 * If PMP is connected, assume it, else - device.
756 status = (ch->pm_present) ? 0x8000 : 0x0001;
759 device_printf(dev, "SNTF 0x%04x\n", status);
760 for (i = 0; i < 16; i++) {
761 if ((status & (1 << i)) == 0)
763 if (xpt_create_path(&dpath, NULL,
764 xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) {
765 xpt_async(AC_SCSI_AEN, dpath, NULL);
766 xpt_free_path(dpath);
773 siis_phy_check_events(device_t dev)
775 struct siis_channel *ch = device_get_softc(dev);
777 /* If we have a connection event, deal with it */
778 if (ch->pm_level == 0) {
779 u_int32_t status = ATA_INL(ch->r_mem, SIIS_P_SSTS);
783 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) &&
784 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) &&
785 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) {
786 device_printf(dev, "CONNECT requested\n");
788 device_printf(dev, "DISCONNECT requested\n");
791 if ((ccb = xpt_alloc_ccb_nowait()) == NULL)
793 if (xpt_create_path(&ccb->ccb_h.path, NULL,
794 cam_sim_path(ch->sim),
795 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
804 siis_ch_intr_locked(void *data)
806 device_t dev = (device_t)data;
807 struct siis_channel *ch = device_get_softc(dev);
811 mtx_unlock(&ch->mtx);
815 siis_ch_intr(void *data)
817 device_t dev = (device_t)data;
818 struct siis_channel *ch = device_get_softc(dev);
819 uint32_t istatus, sstatus, ctx, estatus, ok, err = 0;
820 enum siis_err_type et;
821 int i, ccs, port, tslots;
823 mtx_assert(&ch->mtx, MA_OWNED);
824 /* Read command statuses. */
825 sstatus = ATA_INL(ch->r_mem, SIIS_P_SS);
826 ok = ch->rslots & ~sstatus;
827 /* Complete all successfull commands. */
828 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
830 siis_end_transaction(&ch->slot[i], SIIS_ERR_NONE);
832 /* Do we have any other events? */
833 if ((sstatus & SIIS_P_SS_ATTN) == 0)
835 /* Read and clear interrupt statuses. */
836 istatus = ATA_INL(ch->r_mem, SIIS_P_IS) &
837 (0xFFFF & ~SIIS_P_IX_COMMCOMP);
838 ATA_OUTL(ch->r_mem, SIIS_P_IS, istatus);
839 /* Process PHY events */
840 if (istatus & SIIS_P_IX_PHYRDYCHG)
841 siis_phy_check_events(dev);
842 /* Process NOTIFY events */
843 if (istatus & SIIS_P_IX_SDBN)
844 siis_notify_events(dev);
845 /* Process command errors */
846 if (istatus & SIIS_P_IX_COMMERR) {
847 estatus = ATA_INL(ch->r_mem, SIIS_P_CMDERR);
848 ctx = ATA_INL(ch->r_mem, SIIS_P_CTX);
849 ccs = (ctx & SIIS_P_CTX_SLOT) >> SIIS_P_CTX_SLOT_SHIFT;
850 port = (ctx & SIIS_P_CTX_PMP) >> SIIS_P_CTX_PMP_SHIFT;
851 err = ch->rslots & sstatus;
852 //device_printf(dev, "%s ERROR ss %08x is %08x rs %08x es %d act %d port %d serr %08x\n",
853 // __func__, sstatus, istatus, ch->rslots, estatus, ccs, port,
854 // ATA_INL(ch->r_mem, SIIS_P_SERR));
856 if (!ch->readlog && !ch->recovery) {
857 xpt_freeze_simq(ch->sim, ch->numrslots);
861 union ccb *fccb = ch->frozen;
863 fccb->ccb_h.status &= ~CAM_STATUS_MASK;
864 fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
865 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
866 xpt_freeze_devq(fccb->ccb_h.path, 1);
867 fccb->ccb_h.status |= CAM_DEV_QFRZN;
871 if (estatus == SIIS_P_CMDERR_DEV ||
872 estatus == SIIS_P_CMDERR_SDB ||
873 estatus == SIIS_P_CMDERR_DATAFIS) {
874 tslots = ch->numtslots[port];
875 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
876 /* XXX: requests in loading state. */
877 if (((ch->rslots >> i) & 1) == 0)
879 if (ch->slot[i].ccb->ccb_h.target_id != port)
882 /* Untagged operation. */
886 et = SIIS_ERR_INNOCENT;
888 /* Tagged operation. */
891 siis_end_transaction(&ch->slot[i], et);
894 * We can't reinit port if there are some other
895 * commands active, use resume to complete them.
898 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_RESUME);
900 if (estatus == SIIS_P_CMDERR_SENDFIS ||
901 estatus == SIIS_P_CMDERR_INCSTATE ||
902 estatus == SIIS_P_CMDERR_PPE ||
903 estatus == SIIS_P_CMDERR_SERVICE) {
906 et = SIIS_ERR_INVALID;
907 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
908 /* XXX: requests in loading state. */
909 if (((ch->rslots >> i) & 1) == 0)
911 siis_end_transaction(&ch->slot[i], et);
917 /* Must be called with channel locked. */
919 siis_check_collision(device_t dev, union ccb *ccb)
921 struct siis_channel *ch = device_get_softc(dev);
923 mtx_assert(&ch->mtx, MA_OWNED);
924 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
925 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
926 /* Tagged command while we have no supported tag free. */
927 if (((~ch->oslots) & (0x7fffffff >> (31 -
928 ch->curr[ccb->ccb_h.target_id].tags))) == 0)
931 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
932 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) {
933 /* Atomic command while anything active. */
934 if (ch->numrslots != 0)
937 /* We have some atomic command running. */
943 /* Must be called with channel locked. */
945 siis_begin_transaction(device_t dev, union ccb *ccb)
947 struct siis_channel *ch = device_get_softc(dev);
948 struct siis_slot *slot;
951 mtx_assert(&ch->mtx, MA_OWNED);
952 /* Choose empty slot. */
953 tags = SIIS_MAX_SLOTS;
954 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
955 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA))
956 tags = ch->curr[ccb->ccb_h.target_id].tags;
957 tag = fls((~ch->oslots) & (0x7fffffff >> (31 - tags))) - 1;
958 /* Occupy chosen slot. */
959 slot = &ch->slot[tag];
961 /* Update channel stats. */
962 ch->oslots |= (1 << slot->slot);
964 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
965 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
966 ch->numtslots[ccb->ccb_h.target_id]++;
968 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
969 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)))
970 ch->aslots |= (1 << slot->slot);
972 /* If request moves data, setup and load SG list */
973 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
977 slot->state = SIIS_SLOT_LOADING;
978 if (ccb->ccb_h.func_code == XPT_ATA_IO) {
979 buf = ccb->ataio.data_ptr;
980 size = ccb->ataio.dxfer_len;
982 buf = ccb->csio.data_ptr;
983 size = ccb->csio.dxfer_len;
985 bus_dmamap_load(ch->dma.data_tag, slot->dma.data_map,
986 buf, size, siis_dmasetprd, slot, 0);
988 siis_execute_transaction(slot);
991 /* Locked by busdma engine. */
993 siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
995 struct siis_slot *slot = arg;
996 struct siis_channel *ch = device_get_softc(slot->dev);
997 struct siis_cmd *ctp;
998 struct siis_dma_prd *prd;
1001 mtx_assert(&ch->mtx, MA_OWNED);
1003 device_printf(slot->dev, "DMA load error\n");
1005 xpt_freeze_simq(ch->sim, 1);
1006 siis_end_transaction(slot, SIIS_ERR_INVALID);
1009 KASSERT(nsegs <= SIIS_SG_ENTRIES, ("too many DMA segment entries\n"));
1010 /* Get a piece of the workspace for this request */
1011 ctp = (struct siis_cmd *)
1012 (ch->dma.work + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot));
1013 /* Fill S/G table */
1014 if (slot->ccb->ccb_h.func_code == XPT_ATA_IO)
1015 prd = &ctp->u.ata.prd[0];
1017 prd = &ctp->u.atapi.prd[0];
1018 for (i = 0; i < nsegs; i++) {
1019 prd[i].dba = htole64(segs[i].ds_addr);
1020 prd[i].dbc = htole32(segs[i].ds_len);
1023 prd[nsegs - 1].control = htole32(SIIS_PRD_TRM);
1024 slot->dma.nsegs = nsegs;
1025 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1026 ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ?
1027 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE));
1028 siis_execute_transaction(slot);
1031 /* Must be called with channel locked. */
1033 siis_execute_transaction(struct siis_slot *slot)
1035 device_t dev = slot->dev;
1036 struct siis_channel *ch = device_get_softc(dev);
1037 struct siis_cmd *ctp;
1038 union ccb *ccb = slot->ccb;
1041 mtx_assert(&ch->mtx, MA_OWNED);
1042 /* Get a piece of the workspace for this request */
1043 ctp = (struct siis_cmd *)
1044 (ch->dma.work + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot));
1046 ctp->protocol_override = 0;
1047 ctp->transfer_count = 0;
1048 /* Special handling for Soft Reset command. */
1049 if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1050 if (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) {
1051 ctp->control |= htole16(SIIS_PRB_SOFT_RESET);
1053 ctp->control |= htole16(SIIS_PRB_PROTOCOL_OVERRIDE);
1054 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1055 ctp->protocol_override |=
1056 htole16(SIIS_PRB_PROTO_NCQ);
1058 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
1059 ctp->protocol_override |=
1060 htole16(SIIS_PRB_PROTO_READ);
1062 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
1063 ctp->protocol_override |=
1064 htole16(SIIS_PRB_PROTO_WRITE);
1067 } else if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1068 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
1069 ctp->control |= htole16(SIIS_PRB_PACKET_READ);
1071 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
1072 ctp->control |= htole16(SIIS_PRB_PACKET_WRITE);
1074 /* Special handling for Soft Reset command. */
1075 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1076 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
1077 (ccb->ataio.cmd.control & ATA_A_RESET)) {
1078 /* Kick controller into sane state */
1081 /* Setup the FIS for this request */
1082 if (!siis_setup_fis(dev, ctp, ccb, slot->slot)) {
1083 device_printf(ch->dev, "Setting up SATA FIS failed\n");
1085 xpt_freeze_simq(ch->sim, 1);
1086 siis_end_transaction(slot, SIIS_ERR_INVALID);
1089 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
1090 BUS_DMASYNC_PREWRITE);
1091 /* Issue command to the controller. */
1092 slot->state = SIIS_SLOT_RUNNING;
1093 ch->rslots |= (1 << slot->slot);
1094 prb_bus = ch->dma.work_bus +
1095 SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot);
1096 ATA_OUTL(ch->r_mem, SIIS_P_CACTL(slot->slot), prb_bus);
1097 ATA_OUTL(ch->r_mem, SIIS_P_CACTH(slot->slot), prb_bus >> 32);
1098 /* Start command execution timeout */
1099 callout_reset(&slot->timeout, (int)ccb->ccb_h.timeout * hz / 1000,
1100 (timeout_t*)siis_timeout, slot);
1104 /* Must be called with channel locked. */
1106 siis_process_timeout(device_t dev)
1108 struct siis_channel *ch = device_get_softc(dev);
1111 mtx_assert(&ch->mtx, MA_OWNED);
1112 if (!ch->readlog && !ch->recovery) {
1113 xpt_freeze_simq(ch->sim, ch->numrslots);
1116 /* Handle the rest of commands. */
1117 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1118 /* Do we have a running request on slot? */
1119 if (ch->slot[i].state < SIIS_SLOT_RUNNING)
1121 siis_end_transaction(&ch->slot[i], SIIS_ERR_TIMEOUT);
1125 /* Must be called with channel locked. */
1127 siis_rearm_timeout(device_t dev)
1129 struct siis_channel *ch = device_get_softc(dev);
1132 mtx_assert(&ch->mtx, MA_OWNED);
1133 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1134 struct siis_slot *slot = &ch->slot[i];
1136 /* Do we have a running request on slot? */
1137 if (slot->state < SIIS_SLOT_RUNNING)
1139 if ((ch->toslots & (1 << i)) == 0)
1141 callout_reset(&slot->timeout,
1142 (int)slot->ccb->ccb_h.timeout * hz / 1000,
1143 (timeout_t*)siis_timeout, slot);
1147 /* Locked by callout mechanism. */
1149 siis_timeout(struct siis_slot *slot)
1151 device_t dev = slot->dev;
1152 struct siis_channel *ch = device_get_softc(dev);
1154 mtx_assert(&ch->mtx, MA_OWNED);
1155 /* Check for stale timeout. */
1156 if (slot->state < SIIS_SLOT_RUNNING)
1158 device_printf(dev, "Timeout on slot %d\n", slot->slot);
1159 device_printf(dev, "%s is %08x ss %08x rs %08x es %08x sts %08x serr %08x\n",
1160 __func__, ATA_INL(ch->r_mem, SIIS_P_IS),
1161 ATA_INL(ch->r_mem, SIIS_P_SS), ch->rslots,
1162 ATA_INL(ch->r_mem, SIIS_P_CMDERR), ATA_INL(ch->r_mem, SIIS_P_STS),
1163 ATA_INL(ch->r_mem, SIIS_P_SERR));
1165 if (ch->toslots == 0)
1166 xpt_freeze_simq(ch->sim, 1);
1167 ch->toslots |= (1 << slot->slot);
1168 if ((ch->rslots & ~ch->toslots) == 0)
1169 siis_process_timeout(dev);
1171 device_printf(dev, " ... waiting for slots %08x\n",
1172 ch->rslots & ~ch->toslots);
1175 /* Must be called with channel locked. */
1177 siis_end_transaction(struct siis_slot *slot, enum siis_err_type et)
1179 device_t dev = slot->dev;
1180 struct siis_channel *ch = device_get_softc(dev);
1181 union ccb *ccb = slot->ccb;
1183 mtx_assert(&ch->mtx, MA_OWNED);
1184 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
1185 BUS_DMASYNC_POSTWRITE);
1186 /* Read result registers to the result struct
1187 * May be incorrect if several commands finished same time,
1188 * so read only when sure or have to.
1190 if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1191 struct ata_res *res = &ccb->ataio.res;
1192 if ((et == SIIS_ERR_TFE) ||
1193 (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) {
1194 int offs = SIIS_P_LRAM_SLOT(slot->slot) + 8;
1196 res->status = ATA_INB(ch->r_mem, offs + 2);
1197 res->error = ATA_INB(ch->r_mem, offs + 3);
1198 res->lba_low = ATA_INB(ch->r_mem, offs + 4);
1199 res->lba_mid = ATA_INB(ch->r_mem, offs + 5);
1200 res->lba_high = ATA_INB(ch->r_mem, offs + 6);
1201 res->device = ATA_INB(ch->r_mem, offs + 7);
1202 res->lba_low_exp = ATA_INB(ch->r_mem, offs + 8);
1203 res->lba_mid_exp = ATA_INB(ch->r_mem, offs + 9);
1204 res->lba_high_exp = ATA_INB(ch->r_mem, offs + 10);
1205 res->sector_count = ATA_INB(ch->r_mem, offs + 12);
1206 res->sector_count_exp = ATA_INB(ch->r_mem, offs + 13);
1208 bzero(res, sizeof(*res));
1210 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1211 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1212 (ccb->ccb_h.flags & CAM_DIR_IN) ?
1213 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
1214 bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map);
1216 /* Set proper result status. */
1217 if (et != SIIS_ERR_NONE || ch->recovery) {
1218 ch->eslots |= (1 << slot->slot);
1219 ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
1221 /* In case of error, freeze device for proper recovery. */
1222 if (et != SIIS_ERR_NONE &&
1223 !(ccb->ccb_h.status & CAM_DEV_QFRZN)) {
1224 xpt_freeze_devq(ccb->ccb_h.path, 1);
1225 ccb->ccb_h.status |= CAM_DEV_QFRZN;
1227 ccb->ccb_h.status &= ~CAM_STATUS_MASK;
1230 ccb->ccb_h.status |= CAM_REQ_CMP;
1231 if (ccb->ccb_h.func_code == XPT_SCSI_IO)
1232 ccb->csio.scsi_status = SCSI_STATUS_OK;
1234 case SIIS_ERR_INVALID:
1236 ccb->ccb_h.status |= CAM_REQ_INVALID;
1238 case SIIS_ERR_INNOCENT:
1239 ccb->ccb_h.status |= CAM_REQUEUE_REQ;
1243 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1244 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
1245 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1247 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR;
1252 ccb->ccb_h.status |= CAM_UNCOR_PARITY;
1254 case SIIS_ERR_TIMEOUT:
1256 ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
1259 ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
1262 ch->oslots &= ~(1 << slot->slot);
1263 ch->rslots &= ~(1 << slot->slot);
1264 ch->aslots &= ~(1 << slot->slot);
1265 if (et != SIIS_ERR_TIMEOUT) {
1266 if (ch->toslots == (1 << slot->slot))
1267 xpt_release_simq(ch->sim, TRUE);
1268 ch->toslots &= ~(1 << slot->slot);
1270 slot->state = SIIS_SLOT_EMPTY;
1272 /* Update channel stats. */
1274 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1275 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
1276 ch->numtslots[ccb->ccb_h.target_id]--;
1278 /* If it was our READ LOG command - process it. */
1280 siis_process_read_log(dev, ccb);
1281 /* If it was NCQ command error, put result on hold. */
1282 } else if (et == SIIS_ERR_NCQ) {
1283 ch->hold[slot->slot] = ccb;
1287 /* Unfreeze frozen command. */
1288 if (ch->frozen && !siis_check_collision(dev, ch->frozen)) {
1289 union ccb *fccb = ch->frozen;
1291 siis_begin_transaction(dev, fccb);
1292 xpt_release_simq(ch->sim, TRUE);
1294 /* If we have no other active commands, ... */
1295 if (ch->rslots == 0) {
1296 /* if there were timeouts or fatal error - reset port. */
1297 if (ch->toslots != 0 || ch->fatalerr) {
1300 /* if we have slots in error, we can reinit port. */
1301 if (ch->eslots != 0)
1303 /* if there commands on hold, we can do READ LOG. */
1304 if (!ch->readlog && ch->numhslots)
1305 siis_issue_read_log(dev);
1307 /* If all the reset of commands are in timeout - abort them. */
1308 } else if ((ch->rslots & ~ch->toslots) == 0 &&
1309 et != SIIS_ERR_TIMEOUT)
1310 siis_rearm_timeout(dev);
1314 siis_issue_read_log(device_t dev)
1316 struct siis_channel *ch = device_get_softc(dev);
1318 struct ccb_ataio *ataio;
1321 /* Find some holden command. */
1322 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1326 if (i == SIIS_MAX_SLOTS)
1329 ccb = xpt_alloc_ccb_nowait();
1331 device_printf(dev, "Unable allocate READ LOG command");
1334 ccb->ccb_h = ch->hold[i]->ccb_h; /* Reuse old header. */
1335 ccb->ccb_h.func_code = XPT_ATA_IO;
1336 ccb->ccb_h.flags = CAM_DIR_IN;
1337 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */
1338 ataio = &ccb->ataio;
1339 ataio->data_ptr = malloc(512, M_SIIS, M_NOWAIT);
1340 if (ataio->data_ptr == NULL) {
1341 device_printf(dev, "Unable allocate memory for READ LOG command");
1344 ataio->dxfer_len = 512;
1345 bzero(&ataio->cmd, sizeof(ataio->cmd));
1346 ataio->cmd.flags = CAM_ATAIO_48BIT;
1347 ataio->cmd.command = 0x2F; /* READ LOG EXT */
1348 ataio->cmd.sector_count = 1;
1349 ataio->cmd.sector_count_exp = 0;
1350 ataio->cmd.lba_low = 0x10;
1351 ataio->cmd.lba_mid = 0;
1352 ataio->cmd.lba_mid_exp = 0;
1353 siis_begin_transaction(dev, ccb);
1357 siis_process_read_log(device_t dev, union ccb *ccb)
1359 struct siis_channel *ch = device_get_softc(dev);
1361 struct ata_res *res;
1365 data = ccb->ataio.data_ptr;
1366 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
1367 (data[0] & 0x80) == 0) {
1368 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1371 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id)
1373 if ((data[0] & 0x1F) == i) {
1374 res = &ch->hold[i]->ataio.res;
1375 res->status = data[2];
1376 res->error = data[3];
1377 res->lba_low = data[4];
1378 res->lba_mid = data[5];
1379 res->lba_high = data[6];
1380 res->device = data[7];
1381 res->lba_low_exp = data[8];
1382 res->lba_mid_exp = data[9];
1383 res->lba_high_exp = data[10];
1384 res->sector_count = data[12];
1385 res->sector_count_exp = data[13];
1387 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
1388 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ;
1390 xpt_done(ch->hold[i]);
1395 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
1396 device_printf(dev, "Error while READ LOG EXT\n");
1397 else if ((data[0] & 0x80) == 0) {
1398 device_printf(dev, "Non-queued command error in READ LOG EXT\n");
1400 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1403 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id)
1405 xpt_done(ch->hold[i]);
1410 free(ccb->ataio.data_ptr, M_SIIS);
1415 siis_portinit(device_t dev)
1417 struct siis_channel *ch = device_get_softc(dev);
1422 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_RESUME);
1423 for (i = 0; i < 16; i++) {
1424 ATA_OUTL(ch->r_mem, SIIS_P_PMPSTS(i), 0),
1425 ATA_OUTL(ch->r_mem, SIIS_P_PMPQACT(i), 0);
1427 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_INIT);
1428 siis_wait_ready(dev, 1000);
1432 siis_devreset(device_t dev)
1434 struct siis_channel *ch = device_get_softc(dev);
1438 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_DEV_RESET);
1439 while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) &
1440 SIIS_P_CTL_DEV_RESET) != 0) {
1442 if (timeout++ > 100) {
1443 device_printf(dev, "device reset stuck (timeout %dms) "
1444 "status = %08x\n", timeout, val);
1452 siis_wait_ready(device_t dev, int t)
1454 struct siis_channel *ch = device_get_softc(dev);
1458 while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) &
1459 SIIS_P_CTL_READY) == 0) {
1461 if (timeout++ > t) {
1462 device_printf(dev, "port is not ready (timeout %dms) "
1463 "status = %08x\n", t, val);
1471 siis_reset(device_t dev)
1473 struct siis_channel *ch = device_get_softc(dev);
1474 int i, retry = 0, sata_rev;
1477 xpt_freeze_simq(ch->sim, 1);
1479 device_printf(dev, "SIIS reset...\n");
1480 if (!ch->readlog && !ch->recovery)
1481 xpt_freeze_simq(ch->sim, ch->numrslots);
1482 /* Requeue frozen command. */
1484 union ccb *fccb = ch->frozen;
1486 fccb->ccb_h.status &= ~CAM_STATUS_MASK;
1487 fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
1488 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
1489 xpt_freeze_devq(fccb->ccb_h.path, 1);
1490 fccb->ccb_h.status |= CAM_DEV_QFRZN;
1494 /* Requeue all running commands. */
1495 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1496 /* Do we have a running request on slot? */
1497 if (ch->slot[i].state < SIIS_SLOT_RUNNING)
1499 /* XXX; Commands in loading state. */
1500 siis_end_transaction(&ch->slot[i], SIIS_ERR_INNOCENT);
1502 /* Finish all holden commands as-is. */
1503 for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1506 xpt_done(ch->hold[i]);
1510 if (ch->toslots != 0)
1511 xpt_release_simq(ch->sim, TRUE);
1516 /* Disable port interrupts */
1517 ATA_OUTL(ch->r_mem, SIIS_P_IECLR, 0x0000FFFF);
1518 /* Set speed limit. */
1519 sata_rev = ch->user[ch->pm_present ? 15 : 0].revision;
1521 val = ATA_SC_SPD_SPEED_GEN1;
1522 else if (sata_rev == 2)
1523 val = ATA_SC_SPD_SPEED_GEN2;
1524 else if (sata_rev == 3)
1525 val = ATA_SC_SPD_SPEED_GEN3;
1528 ATA_OUTL(ch->r_mem, SIIS_P_SCTL,
1529 ATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 :
1530 (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)));
1533 /* Reset and reconnect PHY, */
1534 if (!siis_sata_connect(ch)) {
1536 /* Enable port interrupts */
1537 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED);
1540 "SIIS reset done: phy reset found no device\n");
1541 /* Tell the XPT about the event */
1542 xpt_async(AC_BUS_RESET, ch->path, NULL);
1543 xpt_release_simq(ch->sim, TRUE);
1546 /* Wait for clearing busy status. */
1547 if (siis_wait_ready(dev, 10000)) {
1548 device_printf(dev, "device ready timeout\n");
1550 device_printf(dev, "trying full port reset ...\n");
1551 /* Get port to the reset state. */
1552 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET);
1554 /* Get port out of reset state. */
1555 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET);
1556 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT);
1558 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME);
1560 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME);
1561 siis_wait_ready(dev, 5000);
1567 /* Enable port interrupts */
1568 ATA_OUTL(ch->r_mem, SIIS_P_IS, 0xFFFFFFFF);
1569 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED);
1571 device_printf(dev, "SIIS reset done: devices=%08x\n", ch->devices);
1572 /* Tell the XPT about the event */
1573 xpt_async(AC_BUS_RESET, ch->path, NULL);
1574 xpt_release_simq(ch->sim, TRUE);
1578 siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag)
1580 struct siis_channel *ch = device_get_softc(dev);
1581 u_int8_t *fis = &ctp->fis[0];
1584 fis[0] = 0x27; /* host to device */
1585 fis[1] = (ccb->ccb_h.target_id & 0x0f);
1586 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1588 fis[2] = ATA_PACKET_CMD;
1589 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
1590 ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA)
1593 fis[5] = ccb->csio.dxfer_len;
1594 fis[6] = ccb->csio.dxfer_len >> 8;
1597 fis[15] = ATA_A_4BIT;
1598 bzero(ctp->u.atapi.ccb, 16);
1599 bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
1600 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes,
1601 ctp->u.atapi.ccb, ccb->csio.cdb_len);
1602 } else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) {
1604 fis[2] = ccb->ataio.cmd.command;
1605 fis[3] = ccb->ataio.cmd.features;
1606 fis[4] = ccb->ataio.cmd.lba_low;
1607 fis[5] = ccb->ataio.cmd.lba_mid;
1608 fis[6] = ccb->ataio.cmd.lba_high;
1609 fis[7] = ccb->ataio.cmd.device;
1610 fis[8] = ccb->ataio.cmd.lba_low_exp;
1611 fis[9] = ccb->ataio.cmd.lba_mid_exp;
1612 fis[10] = ccb->ataio.cmd.lba_high_exp;
1613 fis[11] = ccb->ataio.cmd.features_exp;
1614 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1618 fis[12] = ccb->ataio.cmd.sector_count;
1619 fis[13] = ccb->ataio.cmd.sector_count_exp;
1621 fis[15] = ATA_A_4BIT;
1629 siis_sata_connect(struct siis_channel *ch)
1634 /* Wait up to 100ms for "connect well" */
1635 for (timeout = 0; timeout < 100 ; timeout++) {
1636 status = ATA_INL(ch->r_mem, SIIS_P_SSTS);
1637 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) &&
1638 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) &&
1639 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE))
1643 if (timeout >= 100) {
1645 device_printf(ch->dev, "SATA connect timeout status=%08x\n",
1651 device_printf(ch->dev, "SATA connect time=%dms status=%08x\n",
1654 /* Clear SATA error register */
1655 ATA_OUTL(ch->r_mem, SIIS_P_SERR, 0xffffffff);
1660 siis_check_ids(device_t dev, union ccb *ccb)
1663 if (ccb->ccb_h.target_id > 15) {
1664 ccb->ccb_h.status = CAM_TID_INVALID;
1668 if (ccb->ccb_h.target_lun != 0) {
1669 ccb->ccb_h.status = CAM_LUN_INVALID;
1677 siisaction(struct cam_sim *sim, union ccb *ccb)
1680 struct siis_channel *ch;
1682 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("siisaction func_code=%x\n",
1683 ccb->ccb_h.func_code));
1685 ch = (struct siis_channel *)cam_sim_softc(sim);
1687 mtx_assert(&ch->mtx, MA_OWNED);
1688 switch (ccb->ccb_h.func_code) {
1689 /* Common cases first */
1690 case XPT_ATA_IO: /* Execute the requested I/O operation */
1692 if (siis_check_ids(dev, ccb))
1694 if (ch->devices == 0 ||
1695 (ch->pm_present == 0 &&
1696 ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) {
1697 ccb->ccb_h.status = CAM_SEL_TIMEOUT;
1700 /* Check for command collision. */
1701 if (siis_check_collision(dev, ccb)) {
1702 /* Freeze command. */
1704 /* We have only one frozen slot, so freeze simq also. */
1705 xpt_freeze_simq(ch->sim, 1);
1708 siis_begin_transaction(dev, ccb);
1710 case XPT_EN_LUN: /* Enable LUN as a target */
1711 case XPT_TARGET_IO: /* Execute target I/O request */
1712 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
1713 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
1714 case XPT_ABORT: /* Abort the specified CCB */
1716 ccb->ccb_h.status = CAM_REQ_INVALID;
1718 case XPT_SET_TRAN_SETTINGS:
1720 struct ccb_trans_settings *cts = &ccb->cts;
1721 struct siis_device *d;
1723 if (siis_check_ids(dev, ccb))
1725 if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
1726 d = &ch->curr[ccb->ccb_h.target_id];
1728 d = &ch->user[ccb->ccb_h.target_id];
1729 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION)
1730 d->revision = cts->xport_specific.sata.revision;
1731 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE)
1732 d->mode = cts->xport_specific.sata.mode;
1733 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT)
1734 d->bytecount = min(8192, cts->xport_specific.sata.bytecount);
1735 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS)
1736 d->tags = min(SIIS_MAX_SLOTS, cts->xport_specific.sata.tags);
1737 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) {
1738 ch->pm_present = cts->xport_specific.sata.pm_present;
1740 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME);
1742 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME);
1744 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS)
1745 d->atapi = cts->xport_specific.sata.atapi;
1746 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS)
1747 d->caps = cts->xport_specific.sata.caps;
1748 ccb->ccb_h.status = CAM_REQ_CMP;
1751 case XPT_GET_TRAN_SETTINGS:
1752 /* Get default/user set transfer settings for the target */
1754 struct ccb_trans_settings *cts = &ccb->cts;
1755 struct siis_device *d;
1758 if (siis_check_ids(dev, ccb))
1760 if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
1761 d = &ch->curr[ccb->ccb_h.target_id];
1763 d = &ch->user[ccb->ccb_h.target_id];
1764 cts->protocol = PROTO_ATA;
1765 cts->protocol_version = PROTO_VERSION_UNSPECIFIED;
1766 cts->transport = XPORT_SATA;
1767 cts->transport_version = XPORT_VERSION_UNSPECIFIED;
1768 cts->proto_specific.valid = 0;
1769 cts->xport_specific.sata.valid = 0;
1770 if (cts->type == CTS_TYPE_CURRENT_SETTINGS &&
1771 (ccb->ccb_h.target_id == 15 ||
1772 (ccb->ccb_h.target_id == 0 && !ch->pm_present))) {
1773 status = ATA_INL(ch->r_mem, SIIS_P_SSTS) & ATA_SS_SPD_MASK;
1774 if (status & 0x0f0) {
1775 cts->xport_specific.sata.revision =
1776 (status & 0x0f0) >> 4;
1777 cts->xport_specific.sata.valid |=
1778 CTS_SATA_VALID_REVISION;
1780 cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D;
1782 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ;
1783 cts->xport_specific.sata.caps &=
1784 ch->user[ccb->ccb_h.target_id].caps;
1785 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
1787 cts->xport_specific.sata.revision = d->revision;
1788 cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION;
1789 cts->xport_specific.sata.caps = d->caps;
1790 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
1792 cts->xport_specific.sata.mode = d->mode;
1793 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE;
1794 cts->xport_specific.sata.bytecount = d->bytecount;
1795 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT;
1796 cts->xport_specific.sata.pm_present = ch->pm_present;
1797 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM;
1798 cts->xport_specific.sata.tags = d->tags;
1799 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS;
1800 cts->xport_specific.sata.atapi = d->atapi;
1801 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI;
1802 ccb->ccb_h.status = CAM_REQ_CMP;
1805 case XPT_RESET_BUS: /* Reset the specified SCSI bus */
1806 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
1808 ccb->ccb_h.status = CAM_REQ_CMP;
1810 case XPT_TERM_IO: /* Terminate the I/O process */
1812 ccb->ccb_h.status = CAM_REQ_INVALID;
1814 case XPT_PATH_INQ: /* Path routing inquiry */
1816 struct ccb_pathinq *cpi = &ccb->cpi;
1818 cpi->version_num = 1; /* XXX??? */
1819 cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE;
1820 cpi->hba_inquiry |= PI_SATAPM;
1821 cpi->target_sprt = 0;
1822 cpi->hba_misc = PIM_SEQSCAN;
1823 cpi->hba_eng_cnt = 0;
1824 cpi->max_target = 15;
1826 cpi->initiator_id = 0;
1827 cpi->bus_id = cam_sim_bus(sim);
1828 cpi->base_transfer_speed = 150000;
1829 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
1830 strncpy(cpi->hba_vid, "SIIS", HBA_IDLEN);
1831 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
1832 cpi->unit_number = cam_sim_unit(sim);
1833 cpi->transport = XPORT_SATA;
1834 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
1835 cpi->protocol = PROTO_ATA;
1836 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
1837 cpi->ccb_h.status = CAM_REQ_CMP;
1838 cpi->maxio = MAXPHYS;
1842 ccb->ccb_h.status = CAM_REQ_INVALID;
1849 siispoll(struct cam_sim *sim)
1851 struct siis_channel *ch = (struct siis_channel *)cam_sim_softc(sim);
1853 siis_ch_intr(ch->dev);