sys/dev/usb/serial/uplcom.c

   1 /*      $NetBSD: uplcom.c,v 1.21 2001/11/13 06:24:56 lukem Exp $        */
   2
   3 #include <sys/cdefs.h>
   4 __FBSDID("$FreeBSD$");
   5
   6 /*-
   7  * Copyright (c) 2001-2003, 2005 Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
   8  * All rights reserved.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer.
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in the
  17  *    documentation and/or other materials provided with the distribution.
  18  *
  19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  29  * SUCH DAMAGE.
  30  */
  31
  32 /*-
  33  * Copyright (c) 2001 The NetBSD Foundation, Inc.
  34  * All rights reserved.
  35  *
  36  * This code is derived from software contributed to The NetBSD Foundation
  37  * by Ichiro FUKUHARA (ichiro@ichiro.org).
  38  *
  39  * Redistribution and use in source and binary forms, with or without
  40  * modification, are permitted provided that the following conditions
  41  * are met:
  42  * 1. Redistributions of source code must retain the above copyright
  43  *    notice, this list of conditions and the following disclaimer.
  44  * 2. Redistributions in binary form must reproduce the above copyright
  45  *    notice, this list of conditions and the following disclaimer in the
  46  *    documentation and/or other materials provided with the distribution.
  47  * 3. All advertising materials mentioning features or use of this software
  48  *    must display the following acknowledgement:
  49  *        This product includes software developed by the NetBSD
  50  *        Foundation, Inc. and its contributors.
  51  * 4. Neither the name of The NetBSD Foundation nor the names of its
  52  *    contributors may be used to endorse or promote products derived
  53  *    from this software without specific prior written permission.
  54  *
  55  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  56  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  57  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  58  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
  59  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  60  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  61  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  62  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  63  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  64  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  65  * POSSIBILITY OF SUCH DAMAGE.
  66  */
  67
  68 /*
  69  * This driver supports several USB-to-RS232 serial adapters driven by
  70  * Prolific PL-2303, PL-2303X and probably PL-2303HX USB-to-RS232
  71  * bridge chip.  The adapters are sold under many different brand
  72  * names.
  73  *
  74  * Datasheets are available at Prolific www site at
  75  * http://www.prolific.com.tw.  The datasheets don't contain full
  76  * programming information for the chip.
  77  *
  78  * PL-2303HX is probably programmed the same as PL-2303X.
  79  *
  80  * There are several differences between PL-2303 and PL-2303(H)X.
  81  * PL-2303(H)X can do higher bitrate in bulk mode, has _probably_
  82  * different command for controlling CRTSCTS and needs special
  83  * sequence of commands for initialization which aren't also
  84  * documented in the datasheet.
  85  */
  86
  87 #include <sys/stdint.h>
  88 #include <sys/stddef.h>
  89 #include <sys/param.h>
  90 #include <sys/queue.h>
  91 #include <sys/types.h>
  92 #include <sys/systm.h>
  93 #include <sys/kernel.h>
  94 #include <sys/bus.h>
  95 #include <sys/module.h>
  96 #include <sys/lock.h>
  97 #include <sys/mutex.h>
  98 #include <sys/condvar.h>
  99 #include <sys/sysctl.h>
 100 #include <sys/sx.h>
 101 #include <sys/unistd.h>
 102 #include <sys/callout.h>
 103 #include <sys/malloc.h>
 104 #include <sys/priv.h>
 105
 106 #include <dev/usb/usb.h>
 107 #include <dev/usb/usbdi.h>
 108 #include <dev/usb/usbdi_util.h>
 109 #include <dev/usb/usb_cdc.h>
 110 #include "usbdevs.h"
 111
 112 #define USB_DEBUG_VAR uplcom_debug
 113 #include <dev/usb/usb_debug.h>
 114 #include <dev/usb/usb_process.h>
 115
 116 #include <dev/usb/serial/usb_serial.h>
 117
 118 #ifdef USB_DEBUG
 119 static int uplcom_debug = 0;
 120
 121 SYSCTL_NODE(_hw_usb, OID_AUTO, uplcom, CTLFLAG_RW, 0, "USB uplcom");
 122 SYSCTL_INT(_hw_usb_uplcom, OID_AUTO, debug, CTLFLAG_RW,
 123     &uplcom_debug, 0, "Debug level");
 124 #endif
 125
 126 #define UPLCOM_MODVER                   1       /* module version */
 127
 128 #define UPLCOM_CONFIG_INDEX             0
 129 #define UPLCOM_IFACE_INDEX              0
 130 #define UPLCOM_SECOND_IFACE_INDEX       1
 131
 132 #ifndef UPLCOM_INTR_INTERVAL
 133 #define UPLCOM_INTR_INTERVAL            0       /* default */
 134 #endif
 135
 136 #define UPLCOM_BULK_BUF_SIZE 1024       /* bytes */
 137
 138 #define UPLCOM_SET_REQUEST              0x01
 139 #define UPLCOM_SET_CRTSCTS              0x41
 140 #define UPLCOM_SET_CRTSCTS_PL2303X      0x61
 141 #define RSAQ_STATUS_CTS                 0x80
 142 #define RSAQ_STATUS_DSR                 0x02
 143 #define RSAQ_STATUS_DCD                 0x01
 144
 145 #define TYPE_PL2303                     0
 146 #define TYPE_PL2303HX                   1
 147
 148 enum {
 149         UPLCOM_BULK_DT_WR,
 150         UPLCOM_BULK_DT_RD,
 151         UPLCOM_INTR_DT_RD,
 152         UPLCOM_N_TRANSFER,
 153 };
 154
 155 struct uplcom_softc {
 156         struct ucom_super_softc sc_super_ucom;
 157         struct ucom_softc sc_ucom;
 158
 159         struct usb_xfer *sc_xfer[UPLCOM_N_TRANSFER];
 160         struct usb_device *sc_udev;
 161         struct mtx sc_mtx;
 162
 163         uint16_t sc_line;
 164
 165         uint8_t sc_lsr;                 /* local status register */
 166         uint8_t sc_msr;                 /* uplcom status register */
 167         uint8_t sc_chiptype;            /* type of chip */
 168         uint8_t sc_ctrl_iface_no;
 169         uint8_t sc_data_iface_no;
 170         uint8_t sc_iface_index[2];
 171 };
 172
 173 /* prototypes */
 174
 175 static usb_error_t uplcom_reset(struct uplcom_softc *, struct usb_device *);
 176 static usb_error_t uplcom_pl2303_do(struct usb_device *, int8_t, uint8_t,
 177                         uint16_t, uint16_t, uint16_t);
 178 static int      uplcom_pl2303_init(struct usb_device *, uint8_t);
 179 static void     uplcom_cfg_set_dtr(struct ucom_softc *, uint8_t);
 180 static void     uplcom_cfg_set_rts(struct ucom_softc *, uint8_t);
 181 static void     uplcom_cfg_set_break(struct ucom_softc *, uint8_t);
 182 static int      uplcom_pre_param(struct ucom_softc *, struct termios *);
 183 static void     uplcom_cfg_param(struct ucom_softc *, struct termios *);
 184 static void     uplcom_start_read(struct ucom_softc *);
 185 static void     uplcom_stop_read(struct ucom_softc *);
 186 static void     uplcom_start_write(struct ucom_softc *);
 187 static void     uplcom_stop_write(struct ucom_softc *);
 188 static void     uplcom_cfg_get_status(struct ucom_softc *, uint8_t *,
 189                     uint8_t *);
 190 static void     uplcom_poll(struct ucom_softc *ucom);
 191
 192 static device_probe_t uplcom_probe;
 193 static device_attach_t uplcom_attach;
 194 static device_detach_t uplcom_detach;
 195
 196 static usb_callback_t uplcom_intr_callback;
 197 static usb_callback_t uplcom_write_callback;
 198 static usb_callback_t uplcom_read_callback;
 199
 200 static const struct usb_config uplcom_config_data[UPLCOM_N_TRANSFER] = {
 201
 202         [UPLCOM_BULK_DT_WR] = {
 203                 .type = UE_BULK,
 204                 .endpoint = UE_ADDR_ANY,
 205                 .direction = UE_DIR_OUT,
 206                 .bufsize = UPLCOM_BULK_BUF_SIZE,
 207                 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
 208                 .callback = &uplcom_write_callback,
 209                 .if_index = 0,
 210         },
 211
 212         [UPLCOM_BULK_DT_RD] = {
 213                 .type = UE_BULK,
 214                 .endpoint = UE_ADDR_ANY,
 215                 .direction = UE_DIR_IN,
 216                 .bufsize = UPLCOM_BULK_BUF_SIZE,
 217                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
 218                 .callback = &uplcom_read_callback,
 219                 .if_index = 0,
 220         },
 221
 222         [UPLCOM_INTR_DT_RD] = {
 223                 .type = UE_INTERRUPT,
 224                 .endpoint = UE_ADDR_ANY,
 225                 .direction = UE_DIR_IN,
 226                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
 227                 .bufsize = 0,   /* use wMaxPacketSize */
 228                 .callback = &uplcom_intr_callback,
 229                 .if_index = 1,
 230         },
 231 };
 232
 233 static struct ucom_callback uplcom_callback = {
 234         .ucom_cfg_get_status = &uplcom_cfg_get_status,
 235         .ucom_cfg_set_dtr = &uplcom_cfg_set_dtr,
 236         .ucom_cfg_set_rts = &uplcom_cfg_set_rts,
 237         .ucom_cfg_set_break = &uplcom_cfg_set_break,
 238         .ucom_cfg_param = &uplcom_cfg_param,
 239         .ucom_pre_param = &uplcom_pre_param,
 240         .ucom_start_read = &uplcom_start_read,
 241         .ucom_stop_read = &uplcom_stop_read,
 242         .ucom_start_write = &uplcom_start_write,
 243         .ucom_stop_write = &uplcom_stop_write,
 244         .ucom_poll = &uplcom_poll,
 245 };
 246
 247 #define UPLCOM_DEV(v,p)                         \
 248   { USB_VENDOR(USB_VENDOR_##v), USB_PRODUCT(USB_PRODUCT_##v##_##p) }
 249
 250 static const struct usb_device_id uplcom_devs[] = {
 251         UPLCOM_DEV(ACERP, S81),                 /* BenQ S81 phone */
 252         UPLCOM_DEV(ADLINK, ND6530),             /* ADLINK ND-6530 USB-Serial */
 253         UPLCOM_DEV(ALCATEL, OT535),             /* Alcatel One Touch 535/735 */
 254         UPLCOM_DEV(ALCOR, AU9720),              /* Alcor AU9720 USB 2.0-RS232 */
 255         UPLCOM_DEV(ANCHOR, SERIAL),             /* Anchor Serial adapter */
 256         UPLCOM_DEV(ATEN, UC232A),               /* PLANEX USB-RS232 URS-03 */
 257         UPLCOM_DEV(BELKIN, F5U257),             /* Belkin F5U257 USB to Serial */
 258         UPLCOM_DEV(COREGA, CGUSBRS232R),        /* Corega CG-USBRS232R */
 259         UPLCOM_DEV(EPSON, CRESSI_EDY),          /* Cressi Edy diving computer */
 260         UPLCOM_DEV(ELECOM, UCSGT),              /* ELECOM UC-SGT Serial Adapter */
 261         UPLCOM_DEV(ELECOM, UCSGT0),             /* ELECOM UC-SGT Serial Adapter */
 262         UPLCOM_DEV(HAL, IMR001),                /* HAL Corporation Crossam2+USB */
 263         UPLCOM_DEV(HP, LD220),                  /* HP LD220 POS Display */
 264         UPLCOM_DEV(IODATA, USBRSAQ),            /* I/O DATA USB-RSAQ */
 265         UPLCOM_DEV(IODATA, USBRSAQ5),           /* I/O DATA USB-RSAQ5 */
 266         UPLCOM_DEV(ITEGNO, WM1080A),            /* iTegno WM1080A GSM/GFPRS modem */
 267         UPLCOM_DEV(ITEGNO, WM2080A),            /* iTegno WM2080A CDMA modem */
 268         UPLCOM_DEV(LEADTEK, 9531),              /* Leadtek 9531 GPS */
 269         UPLCOM_DEV(MICROSOFT, 700WX),           /* Microsoft Palm 700WX */
 270         UPLCOM_DEV(MOBILEACTION, MA620),        /* Mobile Action MA-620 Infrared Adapter */
 271         UPLCOM_DEV(NETINDEX, WS002IN),          /* Willcom W-S002IN */
 272         UPLCOM_DEV(NOKIA2, CA42),               /* Nokia CA-42 cable */
 273         UPLCOM_DEV(OTI, DKU5),                  /* OTI DKU-5 cable */
 274         UPLCOM_DEV(PANASONIC, TYTP50P6S),       /* Panasonic TY-TP50P6-S flat screen */
 275         UPLCOM_DEV(PLX, CA42),                  /* PLX CA-42 clone cable */
 276         UPLCOM_DEV(PROLIFIC, ALLTRONIX_GPRS),   /* Alltronix ACM003U00 modem */
 277         UPLCOM_DEV(PROLIFIC, ALDIGA_AL11U),     /* AlDiga AL-11U modem */
 278         UPLCOM_DEV(PROLIFIC, DCU11),            /* DCU-11 Phone Cable */
 279         UPLCOM_DEV(PROLIFIC, HCR331),           /* HCR331 Card Reader */
 280         UPLCOM_DEV(PROLIFIC, MICROMAX_610U),    /* Micromax 610U modem */
 281         UPLCOM_DEV(PROLIFIC, PHAROS),           /* Prolific Pharos */
 282         UPLCOM_DEV(PROLIFIC, PL2303),           /* Generic adapter */
 283         UPLCOM_DEV(PROLIFIC, RSAQ2),            /* I/O DATA USB-RSAQ2 */
 284         UPLCOM_DEV(PROLIFIC, RSAQ3),            /* I/O DATA USB-RSAQ3 */
 285         UPLCOM_DEV(PROLIFIC, UIC_MSR206),       /* UIC MSR206 Card Reader */
 286         UPLCOM_DEV(PROLIFIC2, PL2303),          /* Prolific adapter */
 287         UPLCOM_DEV(RADIOSHACK, USBCABLE),       /* Radio Shack USB Adapter */
 288         UPLCOM_DEV(RATOC, REXUSB60),            /* RATOC REX-USB60 */
 289         UPLCOM_DEV(SAGEM, USBSERIAL),           /* Sagem USB-Serial Controller */
 290         UPLCOM_DEV(SAMSUNG, I330),              /* Samsung I330 phone cradle */
 291         UPLCOM_DEV(SANWA, KB_USB2),             /* Sanwa KB-USB2 Multimeter cable */
 292         UPLCOM_DEV(SIEMENS3, EF81),             /* Siemens EF81 */
 293         UPLCOM_DEV(SIEMENS3, SX1),              /* Siemens SX1 */
 294         UPLCOM_DEV(SIEMENS3, X65),              /* Siemens X65 */
 295         UPLCOM_DEV(SIEMENS3, X75),              /* Siemens X75 */
 296         UPLCOM_DEV(SITECOM, SERIAL),            /* Sitecom USB to Serial */
 297         UPLCOM_DEV(SMART, PL2303),              /* SMART Technologies USB to Serial */
 298         UPLCOM_DEV(SONY, QN3),                  /* Sony QN3 phone cable */
 299         UPLCOM_DEV(SONYERICSSON, DATAPILOT),    /* Sony Ericsson Datapilot */
 300         UPLCOM_DEV(SONYERICSSON, DCU10),        /* Sony Ericsson DCU-10 Cable */
 301         UPLCOM_DEV(SOURCENEXT, KEIKAI8),        /* SOURCENEXT KeikaiDenwa 8 */
 302         UPLCOM_DEV(SOURCENEXT, KEIKAI8_CHG),    /* SOURCENEXT KeikaiDenwa 8 with charger */
 303         UPLCOM_DEV(SPEEDDRAGON, MS3303H),       /* Speed Dragon USB-Serial */
 304         UPLCOM_DEV(SYNTECH, CPT8001C),          /* Syntech CPT-8001C Barcode scanner */
 305         UPLCOM_DEV(TDK, UHA6400),               /* TDK USB-PHS Adapter UHA6400 */
 306         UPLCOM_DEV(TDK, UPA9664),               /* TDK USB-PHS Adapter UPA9664 */
 307         UPLCOM_DEV(TRIPPLITE, U209),            /* Tripp-Lite U209-000-R USB to Serial */
 308         UPLCOM_DEV(YCCABLE, PL2303),            /* YC Cable USB-Serial */
 309 };
 310 #undef UPLCOM_DEV
 311
 312 static device_method_t uplcom_methods[] = {
 313         DEVMETHOD(device_probe, uplcom_probe),
 314         DEVMETHOD(device_attach, uplcom_attach),
 315         DEVMETHOD(device_detach, uplcom_detach),
 316         {0, 0}
 317 };
 318
 319 static devclass_t uplcom_devclass;
 320
 321 static driver_t uplcom_driver = {
 322         .name = "uplcom",
 323         .methods = uplcom_methods,
 324         .size = sizeof(struct uplcom_softc),
 325 };
 326
 327 DRIVER_MODULE(uplcom, uhub, uplcom_driver, uplcom_devclass, NULL, 0);
 328 MODULE_DEPEND(uplcom, ucom, 1, 1, 1);
 329 MODULE_DEPEND(uplcom, usb, 1, 1, 1);
 330 MODULE_VERSION(uplcom, UPLCOM_MODVER);
 331
 332 static int
 333 uplcom_probe(device_t dev)
 334 {
 335         struct usb_attach_arg *uaa = device_get_ivars(dev);
 336
 337         DPRINTFN(11, "\n");
 338
 339         if (uaa->usb_mode != USB_MODE_HOST) {
 340                 return (ENXIO);
 341         }
 342         if (uaa->info.bConfigIndex != UPLCOM_CONFIG_INDEX) {
 343                 return (ENXIO);
 344         }
 345         if (uaa->info.bIfaceIndex != UPLCOM_IFACE_INDEX) {
 346                 return (ENXIO);
 347         }
 348         return (usbd_lookup_id_by_uaa(uplcom_devs, sizeof(uplcom_devs), uaa));
 349 }
 350
 351 static int
 352 uplcom_attach(device_t dev)
 353 {
 354         struct usb_attach_arg *uaa = device_get_ivars(dev);
 355         struct uplcom_softc *sc = device_get_softc(dev);
 356         struct usb_interface *iface;
 357         struct usb_interface_descriptor *id;
 358         struct usb_device_descriptor *dd;
 359         int error;
 360
 361         DPRINTFN(11, "\n");
 362
 363         device_set_usb_desc(dev);
 364         mtx_init(&sc->sc_mtx, "uplcom", NULL, MTX_DEF);
 365
 366         DPRINTF("sc = %p\n", sc);
 367
 368         sc->sc_udev = uaa->device;
 369
 370         /* Determine the chip type.  This algorithm is taken from Linux. */
 371         dd = usbd_get_device_descriptor(sc->sc_udev);
 372         if (dd->bDeviceClass == 0x02)
 373                 sc->sc_chiptype = TYPE_PL2303;
 374         else if (dd->bMaxPacketSize == 0x40)
 375                 sc->sc_chiptype = TYPE_PL2303HX;
 376         else
 377                 sc->sc_chiptype = TYPE_PL2303;
 378
 379         DPRINTF("chiptype: %s\n",
 380             (sc->sc_chiptype == TYPE_PL2303HX) ?
 381             "2303X" : "2303");
 382
 383         /*
 384          * USB-RSAQ1 has two interface
 385          *
 386          *  USB-RSAQ1       | USB-RSAQ2
 387          * -----------------+-----------------
 388          * Interface 0      |Interface 0
 389          *  Interrupt(0x81) | Interrupt(0x81)
 390          * -----------------+ BulkIN(0x02)
 391          * Interface 1      | BulkOUT(0x83)
 392          *   BulkIN(0x02)   |
 393          *   BulkOUT(0x83)  |
 394          */
 395
 396         sc->sc_ctrl_iface_no = uaa->info.bIfaceNum;
 397         sc->sc_iface_index[1] = UPLCOM_IFACE_INDEX;
 398
 399         iface = usbd_get_iface(uaa->device, UPLCOM_SECOND_IFACE_INDEX);
 400         if (iface) {
 401                 id = usbd_get_interface_descriptor(iface);
 402                 if (id == NULL) {
 403                         device_printf(dev, "no interface descriptor (2)\n");
 404                         goto detach;
 405                 }
 406                 sc->sc_data_iface_no = id->bInterfaceNumber;
 407                 sc->sc_iface_index[0] = UPLCOM_SECOND_IFACE_INDEX;
 408                 usbd_set_parent_iface(uaa->device,
 409                     UPLCOM_SECOND_IFACE_INDEX, uaa->info.bIfaceIndex);
 410         } else {
 411                 sc->sc_data_iface_no = sc->sc_ctrl_iface_no;
 412                 sc->sc_iface_index[0] = UPLCOM_IFACE_INDEX;
 413         }
 414
 415         error = usbd_transfer_setup(uaa->device,
 416             sc->sc_iface_index, sc->sc_xfer, uplcom_config_data,
 417             UPLCOM_N_TRANSFER, sc, &sc->sc_mtx);
 418         if (error) {
 419                 DPRINTF("one or more missing USB endpoints, "
 420                     "error=%s\n", usbd_errstr(error));
 421                 goto detach;
 422         }
 423         error = uplcom_reset(sc, uaa->device);
 424         if (error) {
 425                 device_printf(dev, "reset failed, error=%s\n",
 426                     usbd_errstr(error));
 427                 goto detach;
 428         }
 429         /* clear stall at first run */
 430         mtx_lock(&sc->sc_mtx);
 431         usbd_xfer_set_stall(sc->sc_xfer[UPLCOM_BULK_DT_WR]);
 432         usbd_xfer_set_stall(sc->sc_xfer[UPLCOM_BULK_DT_RD]);
 433         mtx_unlock(&sc->sc_mtx);
 434
 435         error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
 436             &uplcom_callback, &sc->sc_mtx);
 437         if (error) {
 438                 goto detach;
 439         }
 440         /*
 441          * do the initialization during attach so that the system does not
 442          * sleep during open:
 443          */
 444         if (uplcom_pl2303_init(uaa->device, sc->sc_chiptype)) {
 445                 device_printf(dev, "init failed\n");
 446                 goto detach;
 447         }
 448         ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
 449
 450         return (0);
 451
 452 detach:
 453         uplcom_detach(dev);
 454         return (ENXIO);
 455 }
 456
 457 static int
 458 uplcom_detach(device_t dev)
 459 {
 460         struct uplcom_softc *sc = device_get_softc(dev);
 461
 462         DPRINTF("sc=%p\n", sc);
 463
 464         ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
 465         usbd_transfer_unsetup(sc->sc_xfer, UPLCOM_N_TRANSFER);
 466         mtx_destroy(&sc->sc_mtx);
 467
 468         return (0);
 469 }
 470
 471 static usb_error_t
 472 uplcom_reset(struct uplcom_softc *sc, struct usb_device *udev)
 473 {
 474         struct usb_device_request req;
 475
 476         req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
 477         req.bRequest = UPLCOM_SET_REQUEST;
 478         USETW(req.wValue, 0);
 479         req.wIndex[0] = sc->sc_data_iface_no;
 480         req.wIndex[1] = 0;
 481         USETW(req.wLength, 0);
 482
 483         return (usbd_do_request(udev, NULL, &req, NULL));
 484 }
 485
 486 static usb_error_t
 487 uplcom_pl2303_do(struct usb_device *udev, int8_t req_type, uint8_t request,
 488     uint16_t value, uint16_t index, uint16_t length)
 489 {
 490         struct usb_device_request req;
 491         usb_error_t err;
 492         uint8_t buf[4];
 493
 494         req.bmRequestType = req_type;
 495         req.bRequest = request;
 496         USETW(req.wValue, value);
 497         USETW(req.wIndex, index);
 498         USETW(req.wLength, length);
 499
 500         err = usbd_do_request(udev, NULL, &req, buf);
 501         if (err) {
 502                 DPRINTF("error=%s\n", usbd_errstr(err));
 503                 return (1);
 504         }
 505         return (0);
 506 }
 507
 508 static int
 509 uplcom_pl2303_init(struct usb_device *udev, uint8_t chiptype)
 510 {
 511         int err;
 512
 513         if (uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
 514             || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x0404, 0, 0)
 515             || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
 516             || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8383, 0, 1)
 517             || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
 518             || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x0404, 1, 0)
 519             || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8484, 0, 1)
 520             || uplcom_pl2303_do(udev, UT_READ_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0x8383, 0, 1)
 521             || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 0, 1, 0)
 522             || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 1, 0, 0))
 523                 return (EIO);
 524
 525         if (chiptype == TYPE_PL2303HX)
 526                 err = uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 2, 0x44, 0);
 527         else
 528                 err = uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 2, 0x24, 0);
 529         if (err)
 530                 return (EIO);
 531
 532         if (uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 8, 0, 0)
 533             || uplcom_pl2303_do(udev, UT_WRITE_VENDOR_DEVICE, UPLCOM_SET_REQUEST, 9, 0, 0))
 534                 return (EIO);
 535         return (0);
 536 }
 537
 538 static void
 539 uplcom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
 540 {
 541         struct uplcom_softc *sc = ucom->sc_parent;
 542         struct usb_device_request req;
 543
 544         DPRINTF("onoff = %d\n", onoff);
 545
 546         if (onoff)
 547                 sc->sc_line |= UCDC_LINE_DTR;
 548         else
 549                 sc->sc_line &= ~UCDC_LINE_DTR;
 550
 551         req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
 552         req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
 553         USETW(req.wValue, sc->sc_line);
 554         req.wIndex[0] = sc->sc_data_iface_no;
 555         req.wIndex[1] = 0;
 556         USETW(req.wLength, 0);
 557
 558         ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 559             &req, NULL, 0, 1000);
 560 }
 561
 562 static void
 563 uplcom_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
 564 {
 565         struct uplcom_softc *sc = ucom->sc_parent;
 566         struct usb_device_request req;
 567
 568         DPRINTF("onoff = %d\n", onoff);
 569
 570         if (onoff)
 571                 sc->sc_line |= UCDC_LINE_RTS;
 572         else
 573                 sc->sc_line &= ~UCDC_LINE_RTS;
 574
 575         req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
 576         req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
 577         USETW(req.wValue, sc->sc_line);
 578         req.wIndex[0] = sc->sc_data_iface_no;
 579         req.wIndex[1] = 0;
 580         USETW(req.wLength, 0);
 581
 582         ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 583             &req, NULL, 0, 1000);
 584 }
 585
 586 static void
 587 uplcom_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
 588 {
 589         struct uplcom_softc *sc = ucom->sc_parent;
 590         struct usb_device_request req;
 591         uint16_t temp;
 592
 593         DPRINTF("onoff = %d\n", onoff);
 594
 595         temp = (onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF);
 596
 597         req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
 598         req.bRequest = UCDC_SEND_BREAK;
 599         USETW(req.wValue, temp);
 600         req.wIndex[0] = sc->sc_data_iface_no;
 601         req.wIndex[1] = 0;
 602         USETW(req.wLength, 0);
 603
 604         ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 605             &req, NULL, 0, 1000);
 606 }
 607
 608 static const int32_t uplcom_rates[] = {
 609         75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 14400,
 610         19200, 28800, 38400, 57600, 115200,
 611         /*
 612          * Higher speeds are probably possible. PL2303X supports up to
 613          * 6Mb and can set any rate
 614          */
 615         230400, 460800, 614400, 921600, 1228800
 616 };
 617
 618 #define N_UPLCOM_RATES  (sizeof(uplcom_rates)/sizeof(uplcom_rates[0]))
 619
 620 static int
 621 uplcom_pre_param(struct ucom_softc *ucom, struct termios *t)
 622 {
 623         struct uplcom_softc *sc = ucom->sc_parent;
 624         uint8_t i;
 625
 626         DPRINTF("\n");
 627
 628         /**
 629          * Check requested baud rate.
 630          *
 631          * The PL2303 can only set specific baud rates, up to 1228800 baud.
 632          * The PL2303X can set any baud rate up to 6Mb.
 633          * The PL2303HX rev. D can set any baud rate up to 12Mb.
 634          *
 635          * XXX: We currently cannot identify the PL2303HX rev. D, so treat
 636          *      it the same as the PL2303X.
 637          */
 638         if (sc->sc_chiptype != TYPE_PL2303HX) {
 639                 for (i = 0; i < N_UPLCOM_RATES; i++) {
 640                         if (uplcom_rates[i] == t->c_ospeed)
 641                                 return (0);
 642                 }
 643         } else {
 644                 if (t->c_ospeed <= 6000000)
 645                         return (0);
 646         }
 647
 648         DPRINTF("uplcom_param: bad baud rate (%d)\n", t->c_ospeed);
 649         return (EIO);
 650 }
 651
 652 static void
 653 uplcom_cfg_param(struct ucom_softc *ucom, struct termios *t)
 654 {
 655         struct uplcom_softc *sc = ucom->sc_parent;
 656         struct usb_cdc_line_state ls;
 657         struct usb_device_request req;
 658
 659         DPRINTF("sc = %p\n", sc);
 660
 661         bzero(&ls, sizeof(ls));
 662
 663         USETDW(ls.dwDTERate, t->c_ospeed);
 664
 665         if (t->c_cflag & CSTOPB) {
 666                 ls.bCharFormat = UCDC_STOP_BIT_2;
 667         } else {
 668                 ls.bCharFormat = UCDC_STOP_BIT_1;
 669         }
 670
 671         if (t->c_cflag & PARENB) {
 672                 if (t->c_cflag & PARODD) {
 673                         ls.bParityType = UCDC_PARITY_ODD;
 674                 } else {
 675                         ls.bParityType = UCDC_PARITY_EVEN;
 676                 }
 677         } else {
 678                 ls.bParityType = UCDC_PARITY_NONE;
 679         }
 680
 681         switch (t->c_cflag & CSIZE) {
 682         case CS5:
 683                 ls.bDataBits = 5;
 684                 break;
 685         case CS6:
 686                 ls.bDataBits = 6;
 687                 break;
 688         case CS7:
 689                 ls.bDataBits = 7;
 690                 break;
 691         case CS8:
 692                 ls.bDataBits = 8;
 693                 break;
 694         }
 695
 696         DPRINTF("rate=%d fmt=%d parity=%d bits=%d\n",
 697             UGETDW(ls.dwDTERate), ls.bCharFormat,
 698             ls.bParityType, ls.bDataBits);
 699
 700         req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
 701         req.bRequest = UCDC_SET_LINE_CODING;
 702         USETW(req.wValue, 0);
 703         req.wIndex[0] = sc->sc_data_iface_no;
 704         req.wIndex[1] = 0;
 705         USETW(req.wLength, UCDC_LINE_STATE_LENGTH);
 706
 707         ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 708             &req, &ls, 0, 1000);
 709
 710         if (t->c_cflag & CRTSCTS) {
 711
 712                 DPRINTF("crtscts = on\n");
 713
 714                 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
 715                 req.bRequest = UPLCOM_SET_REQUEST;
 716                 USETW(req.wValue, 0);
 717                 if (sc->sc_chiptype == TYPE_PL2303HX)
 718                         USETW(req.wIndex, UPLCOM_SET_CRTSCTS_PL2303X);
 719                 else
 720                         USETW(req.wIndex, UPLCOM_SET_CRTSCTS);
 721                 USETW(req.wLength, 0);
 722
 723                 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 724                     &req, NULL, 0, 1000);
 725         } else {
 726                 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
 727                 req.bRequest = UPLCOM_SET_REQUEST;
 728                 USETW(req.wValue, 0);
 729                 USETW(req.wIndex, 0);
 730                 USETW(req.wLength, 0);
 731                 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 732                     &req, NULL, 0, 1000);
 733         }
 734 }
 735
 736 static void
 737 uplcom_start_read(struct ucom_softc *ucom)
 738 {
 739         struct uplcom_softc *sc = ucom->sc_parent;
 740
 741         /* start interrupt endpoint */
 742         usbd_transfer_start(sc->sc_xfer[UPLCOM_INTR_DT_RD]);
 743
 744         /* start read endpoint */
 745         usbd_transfer_start(sc->sc_xfer[UPLCOM_BULK_DT_RD]);
 746 }
 747
 748 static void
 749 uplcom_stop_read(struct ucom_softc *ucom)
 750 {
 751         struct uplcom_softc *sc = ucom->sc_parent;
 752
 753         /* stop interrupt endpoint */
 754         usbd_transfer_stop(sc->sc_xfer[UPLCOM_INTR_DT_RD]);
 755
 756         /* stop read endpoint */
 757         usbd_transfer_stop(sc->sc_xfer[UPLCOM_BULK_DT_RD]);
 758 }
 759
 760 static void
 761 uplcom_start_write(struct ucom_softc *ucom)
 762 {
 763         struct uplcom_softc *sc = ucom->sc_parent;
 764
 765         usbd_transfer_start(sc->sc_xfer[UPLCOM_BULK_DT_WR]);
 766 }
 767
 768 static void
 769 uplcom_stop_write(struct ucom_softc *ucom)
 770 {
 771         struct uplcom_softc *sc = ucom->sc_parent;
 772
 773         usbd_transfer_stop(sc->sc_xfer[UPLCOM_BULK_DT_WR]);
 774 }
 775
 776 static void
 777 uplcom_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
 778 {
 779         struct uplcom_softc *sc = ucom->sc_parent;
 780
 781         DPRINTF("\n");
 782
 783         *lsr = sc->sc_lsr;
 784         *msr = sc->sc_msr;
 785 }
 786
 787 static void
 788 uplcom_intr_callback(struct usb_xfer *xfer, usb_error_t error)
 789 {
 790         struct uplcom_softc *sc = usbd_xfer_softc(xfer);
 791         struct usb_page_cache *pc;
 792         uint8_t buf[9];
 793         int actlen;
 794
 795         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
 796
 797         switch (USB_GET_STATE(xfer)) {
 798         case USB_ST_TRANSFERRED:
 799
 800                 DPRINTF("actlen = %u\n", actlen);
 801
 802                 if (actlen >= 9) {
 803
 804                         pc = usbd_xfer_get_frame(xfer, 0);
 805                         usbd_copy_out(pc, 0, buf, sizeof(buf));
 806
 807                         DPRINTF("status = 0x%02x\n", buf[8]);
 808
 809                         sc->sc_lsr = 0;
 810                         sc->sc_msr = 0;
 811
 812                         if (buf[8] & RSAQ_STATUS_CTS) {
 813                                 sc->sc_msr |= SER_CTS;
 814                         }
 815                         if (buf[8] & RSAQ_STATUS_DSR) {
 816                                 sc->sc_msr |= SER_DSR;
 817                         }
 818                         if (buf[8] & RSAQ_STATUS_DCD) {
 819                                 sc->sc_msr |= SER_DCD;
 820                         }
 821                         ucom_status_change(&sc->sc_ucom);
 822                 }
 823         case USB_ST_SETUP:
 824 tr_setup:
 825                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 826                 usbd_transfer_submit(xfer);
 827                 return;
 828
 829         default:                        /* Error */
 830                 if (error != USB_ERR_CANCELLED) {
 831                         /* try to clear stall first */
 832                         usbd_xfer_set_stall(xfer);
 833                         goto tr_setup;
 834                 }
 835                 return;
 836         }
 837 }
 838
 839 static void
 840 uplcom_write_callback(struct usb_xfer *xfer, usb_error_t error)
 841 {
 842         struct uplcom_softc *sc = usbd_xfer_softc(xfer);
 843         struct usb_page_cache *pc;
 844         uint32_t actlen;
 845
 846         switch (USB_GET_STATE(xfer)) {
 847         case USB_ST_SETUP:
 848         case USB_ST_TRANSFERRED:
 849 tr_setup:
 850                 pc = usbd_xfer_get_frame(xfer, 0);
 851                 if (ucom_get_data(&sc->sc_ucom, pc, 0,
 852                     UPLCOM_BULK_BUF_SIZE, &actlen)) {
 853
 854                         DPRINTF("actlen = %d\n", actlen);
 855
 856                         usbd_xfer_set_frame_len(xfer, 0, actlen);
 857                         usbd_transfer_submit(xfer);
 858                 }
 859                 return;
 860
 861         default:                        /* Error */
 862                 if (error != USB_ERR_CANCELLED) {
 863                         /* try to clear stall first */
 864                         usbd_xfer_set_stall(xfer);
 865                         goto tr_setup;
 866                 }
 867                 return;
 868         }
 869 }
 870
 871 static void
 872 uplcom_read_callback(struct usb_xfer *xfer, usb_error_t error)
 873 {
 874         struct uplcom_softc *sc = usbd_xfer_softc(xfer);
 875         struct usb_page_cache *pc;
 876         int actlen;
 877
 878         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
 879
 880         switch (USB_GET_STATE(xfer)) {
 881         case USB_ST_TRANSFERRED:
 882                 pc = usbd_xfer_get_frame(xfer, 0);
 883                 ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
 884
 885         case USB_ST_SETUP:
 886 tr_setup:
 887                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 888                 usbd_transfer_submit(xfer);
 889                 return;
 890
 891         default:                        /* Error */
 892                 if (error != USB_ERR_CANCELLED) {
 893                         /* try to clear stall first */
 894                         usbd_xfer_set_stall(xfer);
 895                         goto tr_setup;
 896                 }
 897                 return;
 898         }
 899 }
 900
 901 static void
 902 uplcom_poll(struct ucom_softc *ucom)
 903 {
 904         struct uplcom_softc *sc = ucom->sc_parent;
 905         usbd_transfer_poll(sc->sc_xfer, UPLCOM_N_TRANSFER);
 906 }