sys/dev/usb/usb_hub.c

   1 /* $FreeBSD$ */
   2 /*-
   3  * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
   4  * Copyright (c) 1998 Lennart Augustsson. All rights reserved.
   5  * Copyright (c) 2008-2010 Hans Petter Selasky. All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  *
  16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  26  * SUCH DAMAGE.
  27  */
  28
  29 /*
  30  * USB spec: http://www.usb.org/developers/docs/usbspec.zip
  31  */
  32
  33 #include <sys/stdint.h>
  34 #include <sys/stddef.h>
  35 #include <sys/param.h>
  36 #include <sys/queue.h>
  37 #include <sys/types.h>
  38 #include <sys/systm.h>
  39 #include <sys/kernel.h>
  40 #include <sys/bus.h>
  41 #include <sys/module.h>
  42 #include <sys/lock.h>
  43 #include <sys/mutex.h>
  44 #include <sys/condvar.h>
  45 #include <sys/sysctl.h>
  46 #include <sys/sx.h>
  47 #include <sys/unistd.h>
  48 #include <sys/callout.h>
  49 #include <sys/malloc.h>
  50 #include <sys/priv.h>
  51
  52 #include <dev/usb/usb.h>
  53 #include <dev/usb/usbdi.h>
  54 #include <dev/usb/usbdi_util.h>
  55
  56 #define USB_DEBUG_VAR uhub_debug
  57
  58 #include <dev/usb/usb_core.h>
  59 #include <dev/usb/usb_process.h>
  60 #include <dev/usb/usb_device.h>
  61 #include <dev/usb/usb_request.h>
  62 #include <dev/usb/usb_debug.h>
  63 #include <dev/usb/usb_hub.h>
  64 #include <dev/usb/usb_util.h>
  65 #include <dev/usb/usb_busdma.h>
  66 #include <dev/usb/usb_transfer.h>
  67 #include <dev/usb/usb_dynamic.h>
  68
  69 #include <dev/usb/usb_controller.h>
  70 #include <dev/usb/usb_bus.h>
  71
  72 #define UHUB_INTR_INTERVAL 250          /* ms */
  73 enum {
  74         UHUB_INTR_TRANSFER,
  75 #if USB_HAVE_TT_SUPPORT
  76         UHUB_RESET_TT_TRANSFER,
  77 #endif
  78         UHUB_N_TRANSFER,
  79 };
  80
  81 #ifdef USB_DEBUG
  82 static int uhub_debug = 0;
  83
  84 SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW, 0, "USB HUB");
  85 SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RW | CTLFLAG_TUN, &uhub_debug, 0,
  86     "Debug level");
  87 TUNABLE_INT("hw.usb.uhub.debug", &uhub_debug);
  88 #endif
  89
  90 #if USB_HAVE_POWERD
  91 static int usb_power_timeout = 30;      /* seconds */
  92
  93 SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RW,
  94     &usb_power_timeout, 0, "USB power timeout");
  95 #endif
  96
  97 struct uhub_current_state {
  98         uint16_t port_change;
  99         uint16_t port_status;
 100 };
 101
 102 struct uhub_softc {
 103         struct uhub_current_state sc_st;/* current state */
 104         device_t sc_dev;                /* base device */
 105         struct mtx sc_mtx;              /* our mutex */
 106         struct usb_device *sc_udev;     /* USB device */
 107         struct usb_xfer *sc_xfer[UHUB_N_TRANSFER];      /* interrupt xfer */
 108         uint8_t sc_flags;
 109 #define UHUB_FLAG_DID_EXPLORE 0x01
 110         char    sc_name[32];
 111 };
 112
 113 #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol)
 114 #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB)
 115 #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT)
 116 #define UHUB_IS_MULTI_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBMTT)
 117 #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB)
 118
 119 /* prototypes for type checking: */
 120
 121 static device_probe_t uhub_probe;
 122 static device_attach_t uhub_attach;
 123 static device_detach_t uhub_detach;
 124 static device_suspend_t uhub_suspend;
 125 static device_resume_t uhub_resume;
 126
 127 static bus_driver_added_t uhub_driver_added;
 128 static bus_child_location_str_t uhub_child_location_string;
 129 static bus_child_pnpinfo_str_t uhub_child_pnpinfo_string;
 130
 131 static usb_callback_t uhub_intr_callback;
 132 #if USB_HAVE_TT_SUPPORT
 133 static usb_callback_t uhub_reset_tt_callback;
 134 #endif
 135
 136 static void usb_dev_resume_peer(struct usb_device *udev);
 137 static void usb_dev_suspend_peer(struct usb_device *udev);
 138 static uint8_t usb_peer_should_wakeup(struct usb_device *udev);
 139
 140 static const struct usb_config uhub_config[UHUB_N_TRANSFER] = {
 141
 142         [UHUB_INTR_TRANSFER] = {
 143                 .type = UE_INTERRUPT,
 144                 .endpoint = UE_ADDR_ANY,
 145                 .direction = UE_DIR_ANY,
 146                 .timeout = 0,
 147                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
 148                 .bufsize = 0,   /* use wMaxPacketSize */
 149                 .callback = &uhub_intr_callback,
 150                 .interval = UHUB_INTR_INTERVAL,
 151         },
 152 #if USB_HAVE_TT_SUPPORT
 153         [UHUB_RESET_TT_TRANSFER] = {
 154                 .type = UE_CONTROL,
 155                 .endpoint = 0x00,       /* Control pipe */
 156                 .direction = UE_DIR_ANY,
 157                 .bufsize = sizeof(struct usb_device_request),
 158                 .callback = &uhub_reset_tt_callback,
 159                 .timeout = 1000,        /* 1 second */
 160                 .usb_mode = USB_MODE_HOST,
 161         },
 162 #endif
 163 };
 164
 165 /*
 166  * driver instance for "hub" connected to "usb"
 167  * and "hub" connected to "hub"
 168  */
 169 static devclass_t uhub_devclass;
 170
 171 static device_method_t uhub_methods[] = {
 172         DEVMETHOD(device_probe, uhub_probe),
 173         DEVMETHOD(device_attach, uhub_attach),
 174         DEVMETHOD(device_detach, uhub_detach),
 175
 176         DEVMETHOD(device_suspend, uhub_suspend),
 177         DEVMETHOD(device_resume, uhub_resume),
 178
 179         DEVMETHOD(bus_child_location_str, uhub_child_location_string),
 180         DEVMETHOD(bus_child_pnpinfo_str, uhub_child_pnpinfo_string),
 181         DEVMETHOD(bus_driver_added, uhub_driver_added),
 182         {0, 0}
 183 };
 184
 185 static driver_t uhub_driver = {
 186         .name = "uhub",
 187         .methods = uhub_methods,
 188         .size = sizeof(struct uhub_softc)
 189 };
 190
 191 DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0);
 192 DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0);
 193 MODULE_VERSION(uhub, 1);
 194
 195 static void
 196 uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error)
 197 {
 198         struct uhub_softc *sc = usbd_xfer_softc(xfer);
 199
 200         switch (USB_GET_STATE(xfer)) {
 201         case USB_ST_TRANSFERRED:
 202                 DPRINTFN(2, "\n");
 203                 /*
 204                  * This is an indication that some port
 205                  * has changed status. Notify the bus
 206                  * event handler thread that we need
 207                  * to be explored again:
 208                  */
 209                 usb_needs_explore(sc->sc_udev->bus, 0);
 210
 211         case USB_ST_SETUP:
 212                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 213                 usbd_transfer_submit(xfer);
 214                 break;
 215
 216         default:                        /* Error */
 217                 if (xfer->error != USB_ERR_CANCELLED) {
 218                         /*
 219                          * Do a clear-stall. The "stall_pipe" flag
 220                          * will get cleared before next callback by
 221                          * the USB stack.
 222                          */
 223                         usbd_xfer_set_stall(xfer);
 224                         usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 225                         usbd_transfer_submit(xfer);
 226                 }
 227                 break;
 228         }
 229 }
 230
 231 /*------------------------------------------------------------------------*
 232  *      uhub_reset_tt_proc
 233  *
 234  * This function starts the TT reset USB request
 235  *------------------------------------------------------------------------*/
 236 #if USB_HAVE_TT_SUPPORT
 237 static void
 238 uhub_reset_tt_proc(struct usb_proc_msg *_pm)
 239 {
 240         struct usb_udev_msg *pm = (void *)_pm;
 241         struct usb_device *udev = pm->udev;
 242         struct usb_hub *hub;
 243         struct uhub_softc *sc;
 244
 245         hub = udev->hub;
 246         if (hub == NULL)
 247                 return;
 248         sc = hub->hubsoftc;
 249         if (sc == NULL)
 250                 return;
 251
 252         /* Change lock */
 253         USB_BUS_UNLOCK(udev->bus);
 254         mtx_lock(&sc->sc_mtx);
 255         /* Start transfer */
 256         usbd_transfer_start(sc->sc_xfer[UHUB_RESET_TT_TRANSFER]);
 257         /* Change lock */
 258         mtx_unlock(&sc->sc_mtx);
 259         USB_BUS_LOCK(udev->bus);
 260 }
 261 #endif
 262
 263 /*------------------------------------------------------------------------*
 264  *      uhub_tt_buffer_reset_async_locked
 265  *
 266  * This function queues a TT reset for the given USB device and endpoint.
 267  *------------------------------------------------------------------------*/
 268 #if USB_HAVE_TT_SUPPORT
 269 void
 270 uhub_tt_buffer_reset_async_locked(struct usb_device *child, struct usb_endpoint *ep)
 271 {
 272         struct usb_device_request req;
 273         struct usb_device *udev;
 274         struct usb_hub *hub;
 275         struct usb_port *up;
 276         uint16_t wValue;
 277         uint8_t port;
 278
 279         if (child == NULL || ep == NULL)
 280                 return;
 281
 282         udev = child->parent_hs_hub;
 283         port = child->hs_port_no;
 284
 285         if (udev == NULL)
 286                 return;
 287
 288         hub = udev->hub;
 289         if ((hub == NULL) ||
 290             (udev->speed != USB_SPEED_HIGH) ||
 291             (child->speed != USB_SPEED_LOW &&
 292              child->speed != USB_SPEED_FULL) ||
 293             (child->flags.usb_mode != USB_MODE_HOST) ||
 294             (port == 0) || (ep->edesc == NULL)) {
 295                 /* not applicable */
 296                 return;
 297         }
 298
 299         USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
 300
 301         up = hub->ports + port - 1;
 302
 303         if (udev->ddesc.bDeviceClass == UDCLASS_HUB &&
 304             udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT)
 305                 port = 1;
 306
 307         /* if we already received a clear buffer request, reset the whole TT */
 308         if (up->req_reset_tt.bRequest != 0) {
 309                 req.bmRequestType = UT_WRITE_CLASS_OTHER;
 310                 req.bRequest = UR_RESET_TT;
 311                 USETW(req.wValue, 0);
 312                 req.wIndex[0] = port;
 313                 req.wIndex[1] = 0;
 314                 USETW(req.wLength, 0);
 315         } else {
 316                 wValue = (ep->edesc->bEndpointAddress & 0xF) |
 317                       ((child->address & 0x7F) << 4) |
 318                       ((ep->edesc->bEndpointAddress & 0x80) << 8) |
 319                       ((ep->edesc->bmAttributes & 3) << 12);
 320
 321                 req.bmRequestType = UT_WRITE_CLASS_OTHER;
 322                 req.bRequest = UR_CLEAR_TT_BUFFER;
 323                 USETW(req.wValue, wValue);
 324                 req.wIndex[0] = port;
 325                 req.wIndex[1] = 0;
 326                 USETW(req.wLength, 0);
 327         }
 328         up->req_reset_tt = req;
 329         /* get reset transfer started */
 330         usb_proc_msignal(&udev->bus->non_giant_callback_proc,
 331             &hub->tt_msg[0], &hub->tt_msg[1]);
 332 }
 333 #endif
 334
 335 #if USB_HAVE_TT_SUPPORT
 336 static void
 337 uhub_reset_tt_callback(struct usb_xfer *xfer, usb_error_t error)
 338 {
 339         struct uhub_softc *sc;
 340         struct usb_device *udev;
 341         struct usb_port *up;
 342         uint8_t x;
 343
 344         DPRINTF("TT buffer reset\n");
 345
 346         sc = usbd_xfer_softc(xfer);
 347         udev = sc->sc_udev;
 348
 349         switch (USB_GET_STATE(xfer)) {
 350         case USB_ST_TRANSFERRED:
 351         case USB_ST_SETUP:
 352 tr_setup:
 353                 USB_BUS_LOCK(udev->bus);
 354                 /* find first port which needs a TT reset */
 355                 for (x = 0; x != udev->hub->nports; x++) {
 356                         up = udev->hub->ports + x;
 357
 358                         if (up->req_reset_tt.bRequest == 0)
 359                                 continue;
 360
 361                         /* copy in the transfer */
 362                         usbd_copy_in(xfer->frbuffers, 0, &up->req_reset_tt,
 363                             sizeof(up->req_reset_tt));
 364                         /* reset buffer */
 365                         memset(&up->req_reset_tt, 0, sizeof(up->req_reset_tt));
 366
 367                         /* set length */
 368                         usbd_xfer_set_frame_len(xfer, 0, sizeof(up->req_reset_tt));
 369                         xfer->nframes = 1;
 370                         USB_BUS_UNLOCK(udev->bus);
 371
 372                         usbd_transfer_submit(xfer);
 373                         return;
 374                 }
 375                 USB_BUS_UNLOCK(udev->bus);
 376                 break;
 377
 378         default:
 379                 if (error == USB_ERR_CANCELLED)
 380                         break;
 381
 382                 DPRINTF("TT buffer reset failed (%s)\n", usbd_errstr(error));
 383                 goto tr_setup;
 384         }
 385 }
 386 #endif
 387
 388 /*------------------------------------------------------------------------*
 389  *      uhub_count_active_host_ports
 390  *
 391  * This function counts the number of active ports at the given speed.
 392  *------------------------------------------------------------------------*/
 393 uint8_t
 394 uhub_count_active_host_ports(struct usb_device *udev, enum usb_dev_speed speed)
 395 {
 396         struct uhub_softc *sc;
 397         struct usb_device *child;
 398         struct usb_hub *hub;
 399         struct usb_port *up;
 400         uint8_t retval = 0;
 401         uint8_t x;
 402
 403         if (udev == NULL)
 404                 goto done;
 405         hub = udev->hub;
 406         if (hub == NULL)
 407                 goto done;
 408         sc = hub->hubsoftc;
 409         if (sc == NULL)
 410                 goto done;
 411
 412         for (x = 0; x != hub->nports; x++) {
 413                 up = hub->ports + x;
 414                 child = usb_bus_port_get_device(udev->bus, up);
 415                 if (child != NULL &&
 416                     child->flags.usb_mode == USB_MODE_HOST &&
 417                     child->speed == speed)
 418                         retval++;
 419         }
 420 done:
 421         return (retval);
 422 }
 423
 424 void
 425 uhub_explore_handle_re_enumerate(struct usb_device *child)
 426 {
 427         uint8_t do_unlock;
 428         usb_error_t err;
 429
 430         /* check if device should be re-enumerated */
 431         if (child->flags.usb_mode != USB_MODE_HOST)
 432                 return;
 433
 434         do_unlock = usbd_enum_lock(child);
 435         switch (child->re_enumerate_wait) {
 436         case USB_RE_ENUM_START:
 437                 err = usbd_set_config_index(child,
 438                     USB_UNCONFIG_INDEX);
 439                 if (err != 0) {
 440                         DPRINTF("Unconfigure failed: %s: Ignored.\n",
 441                             usbd_errstr(err));
 442                 }
 443                 if (child->parent_hub == NULL) {
 444                         /* the root HUB cannot be re-enumerated */
 445                         DPRINTFN(6, "cannot reset root HUB\n");
 446                         err = 0;
 447                 } else {
 448                         err = usbd_req_re_enumerate(child, NULL);
 449                 }
 450                 if (err == 0)
 451                         err = usbd_set_config_index(child, 0);
 452                 if (err == 0) {
 453                         err = usb_probe_and_attach(child,
 454                             USB_IFACE_INDEX_ANY);
 455                 }
 456                 child->re_enumerate_wait = USB_RE_ENUM_DONE;
 457                 break;
 458
 459         case USB_RE_ENUM_PWR_OFF:
 460                 /* get the device unconfigured */
 461                 err = usbd_set_config_index(child,
 462                     USB_UNCONFIG_INDEX);
 463                 if (err) {
 464                         DPRINTFN(0, "Could not unconfigure "
 465                             "device (ignored)\n");
 466                 }
 467                 if (child->parent_hub == NULL) {
 468                         /* the root HUB cannot be re-enumerated */
 469                         DPRINTFN(6, "cannot set port feature\n");
 470                         err = 0;
 471                 } else {
 472                         /* clear port enable */
 473                         err = usbd_req_clear_port_feature(child->parent_hub,
 474                             NULL, child->port_no, UHF_PORT_ENABLE);
 475                         if (err) {
 476                                 DPRINTFN(0, "Could not disable port "
 477                                     "(ignored)\n");
 478                         }
 479                 }
 480                 child->re_enumerate_wait = USB_RE_ENUM_DONE;
 481                 break;
 482
 483         case USB_RE_ENUM_SET_CONFIG:
 484                 err = usbd_set_config_index(child,
 485                     child->next_config_index);
 486                 if (err != 0) {
 487                         DPRINTF("Configure failed: %s: Ignored.\n",
 488                             usbd_errstr(err));
 489                 } else {
 490                         err = usb_probe_and_attach(child,
 491                             USB_IFACE_INDEX_ANY);
 492                 }
 493                 child->re_enumerate_wait = USB_RE_ENUM_DONE;
 494                 break;
 495
 496         default:
 497                 child->re_enumerate_wait = USB_RE_ENUM_DONE;
 498                 break;
 499         }
 500         if (do_unlock)
 501                 usbd_enum_unlock(child);
 502 }
 503
 504 /*------------------------------------------------------------------------*
 505  *      uhub_explore_sub - subroutine
 506  *
 507  * Return values:
 508  *    0: Success
 509  * Else: A control transaction failed
 510  *------------------------------------------------------------------------*/
 511 static usb_error_t
 512 uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up)
 513 {
 514         struct usb_bus *bus;
 515         struct usb_device *child;
 516         uint8_t refcount;
 517         usb_error_t err;
 518
 519         bus = sc->sc_udev->bus;
 520         err = 0;
 521
 522         /* get driver added refcount from USB bus */
 523         refcount = bus->driver_added_refcount;
 524
 525         /* get device assosiated with the given port */
 526         child = usb_bus_port_get_device(bus, up);
 527         if (child == NULL) {
 528                 /* nothing to do */
 529                 goto done;
 530         }
 531
 532         uhub_explore_handle_re_enumerate(child);
 533
 534         /* check if probe and attach should be done */
 535
 536         if (child->driver_added_refcount != refcount) {
 537                 child->driver_added_refcount = refcount;
 538                 err = usb_probe_and_attach(child,
 539                     USB_IFACE_INDEX_ANY);
 540                 if (err) {
 541                         goto done;
 542                 }
 543         }
 544         /* start control transfer, if device mode */
 545
 546         if (child->flags.usb_mode == USB_MODE_DEVICE)
 547                 usbd_ctrl_transfer_setup(child);
 548
 549         /* if a HUB becomes present, do a recursive HUB explore */
 550
 551         if (child->hub)
 552                 err = (child->hub->explore) (child);
 553
 554 done:
 555         return (err);
 556 }
 557
 558 /*------------------------------------------------------------------------*
 559  *      uhub_read_port_status - factored out code
 560  *------------------------------------------------------------------------*/
 561 static usb_error_t
 562 uhub_read_port_status(struct uhub_softc *sc, uint8_t portno)
 563 {
 564         struct usb_port_status ps;
 565         usb_error_t err;
 566
 567         err = usbd_req_get_port_status(
 568             sc->sc_udev, NULL, &ps, portno);
 569
 570         /* update status regardless of error */
 571
 572         sc->sc_st.port_status = UGETW(ps.wPortStatus);
 573         sc->sc_st.port_change = UGETW(ps.wPortChange);
 574
 575         /* debugging print */
 576
 577         DPRINTFN(4, "port %d, wPortStatus=0x%04x, "
 578             "wPortChange=0x%04x, err=%s\n",
 579             portno, sc->sc_st.port_status,
 580             sc->sc_st.port_change, usbd_errstr(err));
 581         return (err);
 582 }
 583
 584 /*------------------------------------------------------------------------*
 585  *      uhub_reattach_port
 586  *
 587  * Returns:
 588  *    0: Success
 589  * Else: A control transaction failed
 590  *------------------------------------------------------------------------*/
 591 static usb_error_t
 592 uhub_reattach_port(struct uhub_softc *sc, uint8_t portno)
 593 {
 594         struct usb_device *child;
 595         struct usb_device *udev;
 596         enum usb_dev_speed speed;
 597         enum usb_hc_mode mode;
 598         usb_error_t err;
 599         uint16_t power_mask;
 600         uint8_t timeout;
 601
 602         DPRINTF("reattaching port %d\n", portno);
 603
 604         err = 0;
 605         timeout = 0;
 606         udev = sc->sc_udev;
 607         child = usb_bus_port_get_device(udev->bus,
 608             udev->hub->ports + portno - 1);
 609
 610 repeat:
 611
 612         /* first clear the port connection change bit */
 613
 614         err = usbd_req_clear_port_feature(udev, NULL,
 615             portno, UHF_C_PORT_CONNECTION);
 616
 617         if (err) {
 618                 goto error;
 619         }
 620         /* check if there is a child */
 621
 622         if (child != NULL) {
 623                 /*
 624                  * Free USB device and all subdevices, if any.
 625                  */
 626                 usb_free_device(child, 0);
 627                 child = NULL;
 628         }
 629         /* get fresh status */
 630
 631         err = uhub_read_port_status(sc, portno);
 632         if (err) {
 633                 goto error;
 634         }
 635         /* check if nothing is connected to the port */
 636
 637         if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) {
 638                 goto error;
 639         }
 640         /* check if there is no power on the port and print a warning */
 641
 642         switch (udev->speed) {
 643         case USB_SPEED_HIGH:
 644         case USB_SPEED_FULL:
 645         case USB_SPEED_LOW:
 646                 power_mask = UPS_PORT_POWER;
 647                 break;
 648         case USB_SPEED_SUPER:
 649                 if (udev->parent_hub == NULL)
 650                         power_mask = UPS_PORT_POWER;
 651                 else
 652                         power_mask = UPS_PORT_POWER_SS;
 653                 break;
 654         default:
 655                 power_mask = 0;
 656                 break;
 657         }
 658         if (!(sc->sc_st.port_status & power_mask)) {
 659                 DPRINTF("WARNING: strange, connected port %d "
 660                     "has no power\n", portno);
 661         }
 662
 663         /* check if the device is in Host Mode */
 664
 665         if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) {
 666
 667                 DPRINTF("Port %d is in Host Mode\n", portno);
 668
 669                 if (sc->sc_st.port_status & UPS_SUSPEND) {
 670                         /*
 671                          * NOTE: Should not get here in SuperSpeed
 672                          * mode, because the HUB should report this
 673                          * bit as zero.
 674                          */
 675                         DPRINTF("Port %d was still "
 676                             "suspended, clearing.\n", portno);
 677                         err = usbd_req_clear_port_feature(udev,
 678                             NULL, portno, UHF_PORT_SUSPEND);
 679                 }
 680
 681                 /* USB Host Mode */
 682
 683                 /* wait for maximum device power up time */
 684
 685                 usb_pause_mtx(NULL,
 686                     USB_MS_TO_TICKS(usb_port_powerup_delay));
 687
 688                 /* reset port, which implies enabling it */
 689
 690                 err = usbd_req_reset_port(udev, NULL, portno);
 691
 692                 if (err) {
 693                         DPRINTFN(0, "port %d reset "
 694                             "failed, error=%s\n",
 695                             portno, usbd_errstr(err));
 696                         goto error;
 697                 }
 698                 /* get port status again, it might have changed during reset */
 699
 700                 err = uhub_read_port_status(sc, portno);
 701                 if (err) {
 702                         goto error;
 703                 }
 704                 /* check if something changed during port reset */
 705
 706                 if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) ||
 707                     (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) {
 708                         if (timeout) {
 709                                 DPRINTFN(0, "giving up port reset "
 710                                     "- device vanished\n");
 711                                 goto error;
 712                         }
 713                         timeout = 1;
 714                         goto repeat;
 715                 }
 716         } else {
 717                 DPRINTF("Port %d is in Device Mode\n", portno);
 718         }
 719
 720         /*
 721          * Figure out the device speed
 722          */
 723         switch (udev->speed) {
 724         case USB_SPEED_HIGH:
 725                 if (sc->sc_st.port_status & UPS_HIGH_SPEED)
 726                         speed = USB_SPEED_HIGH;
 727                 else if (sc->sc_st.port_status & UPS_LOW_SPEED)
 728                         speed = USB_SPEED_LOW;
 729                 else
 730                         speed = USB_SPEED_FULL;
 731                 break;
 732         case USB_SPEED_FULL:
 733                 if (sc->sc_st.port_status & UPS_LOW_SPEED)
 734                         speed = USB_SPEED_LOW;
 735                 else
 736                         speed = USB_SPEED_FULL;
 737                 break;
 738         case USB_SPEED_LOW:
 739                 speed = USB_SPEED_LOW;
 740                 break;
 741         case USB_SPEED_SUPER:
 742                 if (udev->parent_hub == NULL) {
 743                         /* Root HUB - special case */
 744                         switch (sc->sc_st.port_status & UPS_OTHER_SPEED) {
 745                         case 0:
 746                                 speed = USB_SPEED_FULL;
 747                                 break;
 748                         case UPS_LOW_SPEED:
 749                                 speed = USB_SPEED_LOW;
 750                                 break;
 751                         case UPS_HIGH_SPEED:
 752                                 speed = USB_SPEED_HIGH;
 753                                 break;
 754                         default:
 755                                 speed = USB_SPEED_SUPER;
 756                                 break;
 757                         }
 758                 } else {
 759                         speed = USB_SPEED_SUPER;
 760                 }
 761                 break;
 762         default:
 763                 /* same speed like parent */
 764                 speed = udev->speed;
 765                 break;
 766         }
 767         if (speed == USB_SPEED_SUPER) {
 768                 err = usbd_req_set_hub_u1_timeout(udev, NULL,
 769                     portno, 128 - (2 * udev->depth));
 770                 if (err) {
 771                         DPRINTFN(0, "port %d U1 timeout "
 772                             "failed, error=%s\n",
 773                             portno, usbd_errstr(err));
 774                 }
 775                 err = usbd_req_set_hub_u2_timeout(udev, NULL,
 776                     portno, 128 - (2 * udev->depth));
 777                 if (err) {
 778                         DPRINTFN(0, "port %d U2 timeout "
 779                             "failed, error=%s\n",
 780                             portno, usbd_errstr(err));
 781                 }
 782         }
 783
 784         /*
 785          * Figure out the device mode
 786          *
 787          * NOTE: This part is currently FreeBSD specific.
 788          */
 789         if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)
 790                 mode = USB_MODE_DEVICE;
 791         else
 792                 mode = USB_MODE_HOST;
 793
 794         /* need to create a new child */
 795         child = usb_alloc_device(sc->sc_dev, udev->bus, udev,
 796             udev->depth + 1, portno - 1, portno, speed, mode);
 797         if (child == NULL) {
 798                 DPRINTFN(0, "could not allocate new device\n");
 799                 goto error;
 800         }
 801         return (0);                     /* success */
 802
 803 error:
 804         if (child != NULL) {
 805                 /*
 806                  * Free USB device and all subdevices, if any.
 807                  */
 808                 usb_free_device(child, 0);
 809                 child = NULL;
 810         }
 811         if (err == 0) {
 812                 if (sc->sc_st.port_status & UPS_PORT_ENABLED) {
 813                         err = usbd_req_clear_port_feature(
 814                             sc->sc_udev, NULL,
 815                             portno, UHF_PORT_ENABLE);
 816                 }
 817         }
 818         if (err) {
 819                 DPRINTFN(0, "device problem (%s), "
 820                     "disabling port %d\n", usbd_errstr(err), portno);
 821         }
 822         return (err);
 823 }
 824
 825 /*------------------------------------------------------------------------*
 826  *      usb_device_20_compatible
 827  *
 828  * Returns:
 829  *    0: HUB does not support suspend and resume
 830  * Else: HUB supports suspend and resume
 831  *------------------------------------------------------------------------*/
 832 static uint8_t
 833 usb_device_20_compatible(struct usb_device *udev)
 834 {
 835         if (udev == NULL)
 836                 return (0);
 837         switch (udev->speed) {
 838         case USB_SPEED_LOW:
 839         case USB_SPEED_FULL:
 840         case USB_SPEED_HIGH:
 841                 return (1);
 842         default:
 843                 return (0);
 844         }
 845 }
 846
 847 /*------------------------------------------------------------------------*
 848  *      uhub_suspend_resume_port
 849  *
 850  * Returns:
 851  *    0: Success
 852  * Else: A control transaction failed
 853  *------------------------------------------------------------------------*/
 854 static usb_error_t
 855 uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno)
 856 {
 857         struct usb_device *child;
 858         struct usb_device *udev;
 859         uint8_t is_suspend;
 860         usb_error_t err;
 861
 862         DPRINTF("port %d\n", portno);
 863
 864         udev = sc->sc_udev;
 865         child = usb_bus_port_get_device(udev->bus,
 866             udev->hub->ports + portno - 1);
 867
 868         /* first clear the port suspend change bit */
 869
 870         if (usb_device_20_compatible(udev)) {
 871                 err = usbd_req_clear_port_feature(udev, NULL,
 872                     portno, UHF_C_PORT_SUSPEND);
 873         } else {
 874                 err = usbd_req_clear_port_feature(udev, NULL,
 875                     portno, UHF_C_PORT_LINK_STATE);
 876         }
 877
 878         if (err) {
 879                 DPRINTF("clearing suspend failed.\n");
 880                 goto done;
 881         }
 882         /* get fresh status */
 883
 884         err = uhub_read_port_status(sc, portno);
 885         if (err) {
 886                 DPRINTF("reading port status failed.\n");
 887                 goto done;
 888         }
 889         /* convert current state */
 890
 891         if (usb_device_20_compatible(udev)) {
 892                 if (sc->sc_st.port_status & UPS_SUSPEND) {
 893                         is_suspend = 1;
 894                 } else {
 895                         is_suspend = 0;
 896                 }
 897         } else {
 898                 switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) {
 899                 case UPS_PORT_LS_U3:
 900                         is_suspend = 1;
 901                         break;
 902                 case UPS_PORT_LS_SS_INA:
 903                         usbd_req_warm_reset_port(udev, NULL, portno);
 904                         is_suspend = 0;
 905                         break;
 906                 default:
 907                         is_suspend = 0;
 908                         break;
 909                 }
 910         }
 911
 912         DPRINTF("suspended=%u\n", is_suspend);
 913
 914         /* do the suspend or resume */
 915
 916         if (child) {
 917                 /*
 918                  * This code handle two cases: 1) Host Mode - we can only
 919                  * receive resume here 2) Device Mode - we can receive
 920                  * suspend and resume here
 921                  */
 922                 if (is_suspend == 0)
 923                         usb_dev_resume_peer(child);
 924                 else if (child->flags.usb_mode == USB_MODE_DEVICE)
 925                         usb_dev_suspend_peer(child);
 926         }
 927 done:
 928         return (err);
 929 }
 930
 931 /*------------------------------------------------------------------------*
 932  *      uhub_root_interrupt
 933  *
 934  * This function is called when a Root HUB interrupt has
 935  * happened. "ptr" and "len" makes up the Root HUB interrupt
 936  * packet. This function is called having the "bus_mtx" locked.
 937  *------------------------------------------------------------------------*/
 938 void
 939 uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len)
 940 {
 941         USB_BUS_LOCK_ASSERT(bus, MA_OWNED);
 942
 943         usb_needs_explore(bus, 0);
 944 }
 945
 946 static uint8_t
 947 uhub_is_too_deep(struct usb_device *udev)
 948 {
 949         switch (udev->speed) {
 950         case USB_SPEED_FULL:
 951         case USB_SPEED_LOW:
 952         case USB_SPEED_HIGH:
 953                 if (udev->depth > USB_HUB_MAX_DEPTH)
 954                         return (1);
 955                 break;
 956         case USB_SPEED_SUPER:
 957                 if (udev->depth > USB_SS_HUB_DEPTH_MAX)
 958                         return (1);
 959                 break;
 960         default:
 961                 break;
 962         }
 963         return (0);
 964 }
 965
 966 /*------------------------------------------------------------------------*
 967  *      uhub_explore
 968  *
 969  * Returns:
 970  *     0: Success
 971  *  Else: Failure
 972  *------------------------------------------------------------------------*/
 973 static usb_error_t
 974 uhub_explore(struct usb_device *udev)
 975 {
 976         struct usb_hub *hub;
 977         struct uhub_softc *sc;
 978         struct usb_port *up;
 979         usb_error_t err;
 980         uint8_t portno;
 981         uint8_t x;
 982         uint8_t do_unlock;
 983
 984         hub = udev->hub;
 985         sc = hub->hubsoftc;
 986
 987         DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address);
 988
 989         /* ignore devices that are too deep */
 990         if (uhub_is_too_deep(udev))
 991                 return (USB_ERR_TOO_DEEP);
 992
 993         /* check if device is suspended */
 994         if (udev->flags.self_suspended) {
 995                 /* need to wait until the child signals resume */
 996                 DPRINTF("Device is suspended!\n");
 997                 return (0);
 998         }
 999
1000         /*
1001          * Make sure we don't race against user-space applications
1002          * like LibUSB:
1003          */
1004         do_unlock = usbd_enum_lock(udev);
1005
1006         for (x = 0; x != hub->nports; x++) {
1007                 up = hub->ports + x;
1008                 portno = x + 1;
1009
1010                 err = uhub_read_port_status(sc, portno);
1011                 if (err) {
1012                         /* most likely the HUB is gone */
1013                         break;
1014                 }
1015                 if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) {
1016                         DPRINTF("Overcurrent on port %u.\n", portno);
1017                         err = usbd_req_clear_port_feature(
1018                             udev, NULL, portno, UHF_C_PORT_OVER_CURRENT);
1019                         if (err) {
1020                                 /* most likely the HUB is gone */
1021                                 break;
1022                         }
1023                 }
1024                 if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) {
1025                         /*
1026                          * Fake a connect status change so that the
1027                          * status gets checked initially!
1028                          */
1029                         sc->sc_st.port_change |=
1030                             UPS_C_CONNECT_STATUS;
1031                 }
1032                 if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) {
1033                         err = usbd_req_clear_port_feature(
1034                             udev, NULL, portno, UHF_C_PORT_ENABLE);
1035                         if (err) {
1036                                 /* most likely the HUB is gone */
1037                                 break;
1038                         }
1039                         if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) {
1040                                 /*
1041                                  * Ignore the port error if the device
1042                                  * has vanished !
1043                                  */
1044                         } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) {
1045                                 DPRINTFN(0, "illegal enable change, "
1046                                     "port %d\n", portno);
1047                         } else {
1048
1049                                 if (up->restartcnt == USB_RESTART_MAX) {
1050                                         /* XXX could try another speed ? */
1051                                         DPRINTFN(0, "port error, giving up "
1052                                             "port %d\n", portno);
1053                                 } else {
1054                                         sc->sc_st.port_change |=
1055                                             UPS_C_CONNECT_STATUS;
1056                                         up->restartcnt++;
1057                                 }
1058                         }
1059                 }
1060                 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) {
1061                         err = uhub_reattach_port(sc, portno);
1062                         if (err) {
1063                                 /* most likely the HUB is gone */
1064                                 break;
1065                         }
1066                 }
1067                 if (sc->sc_st.port_change & (UPS_C_SUSPEND |
1068                     UPS_C_PORT_LINK_STATE)) {
1069                         err = uhub_suspend_resume_port(sc, portno);
1070                         if (err) {
1071                                 /* most likely the HUB is gone */
1072                                 break;
1073                         }
1074                 }
1075                 err = uhub_explore_sub(sc, up);
1076                 if (err) {
1077                         /* no device(s) present */
1078                         continue;
1079                 }
1080                 /* explore succeeded - reset restart counter */
1081                 up->restartcnt = 0;
1082         }
1083
1084         if (do_unlock)
1085                 usbd_enum_unlock(udev);
1086
1087         /* initial status checked */
1088         sc->sc_flags |= UHUB_FLAG_DID_EXPLORE;
1089
1090         /* return success */
1091         return (USB_ERR_NORMAL_COMPLETION);
1092 }
1093
1094 static int
1095 uhub_probe(device_t dev)
1096 {
1097         struct usb_attach_arg *uaa = device_get_ivars(dev);
1098
1099         if (uaa->usb_mode != USB_MODE_HOST)
1100                 return (ENXIO);
1101
1102         /*
1103          * The subclass for USB HUBs is currently ignored because it
1104          * is 0 for some and 1 for others.
1105          */
1106         if (uaa->info.bConfigIndex == 0 &&
1107             uaa->info.bDeviceClass == UDCLASS_HUB)
1108                 return (0);
1109
1110         return (ENXIO);
1111 }
1112
1113 /* NOTE: The information returned by this function can be wrong. */
1114 usb_error_t
1115 uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt)
1116 {
1117         struct usb_hub_descriptor hubdesc20;
1118         struct usb_hub_ss_descriptor hubdesc30;
1119         usb_error_t err;
1120         uint8_t nports;
1121         uint8_t tt;
1122
1123         if (udev->ddesc.bDeviceClass != UDCLASS_HUB)
1124                 return (USB_ERR_INVAL);
1125
1126         nports = 0;
1127         tt = 0;
1128
1129         switch (udev->speed) {
1130         case USB_SPEED_LOW:
1131         case USB_SPEED_FULL:
1132         case USB_SPEED_HIGH:
1133                 /* assuming that there is one port */
1134                 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1);
1135                 if (err) {
1136                         DPRINTFN(0, "getting USB 2.0 HUB descriptor failed,"
1137                             "error=%s\n", usbd_errstr(err));
1138                         break;
1139                 }
1140                 nports = hubdesc20.bNbrPorts;
1141                 if (nports > 127)
1142                         nports = 127;
1143
1144                 if (udev->speed == USB_SPEED_HIGH)
1145                         tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3;
1146                 break;
1147
1148         case USB_SPEED_SUPER:
1149                 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1);
1150                 if (err) {
1151                         DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed,"
1152                             "error=%s\n", usbd_errstr(err));
1153                         break;
1154                 }
1155                 nports = hubdesc30.bNbrPorts;
1156                 if (nports > 16)
1157                         nports = 16;
1158                 break;
1159
1160         default:
1161                 err = USB_ERR_INVAL;
1162                 break;
1163         }
1164
1165         if (pnports != NULL)
1166                 *pnports = nports;
1167
1168         if (ptt != NULL)
1169                 *ptt = tt;
1170
1171         return (err);
1172 }
1173
1174 static int
1175 uhub_attach(device_t dev)
1176 {
1177         struct uhub_softc *sc = device_get_softc(dev);
1178         struct usb_attach_arg *uaa = device_get_ivars(dev);
1179         struct usb_device *udev = uaa->device;
1180         struct usb_device *parent_hub = udev->parent_hub;
1181         struct usb_hub *hub;
1182         struct usb_hub_descriptor hubdesc20;
1183         struct usb_hub_ss_descriptor hubdesc30;
1184         uint16_t pwrdly;
1185         uint8_t x;
1186         uint8_t nports;
1187         uint8_t portno;
1188         uint8_t removable;
1189         uint8_t iface_index;
1190         usb_error_t err;
1191
1192         sc->sc_udev = udev;
1193         sc->sc_dev = dev;
1194
1195         mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF);
1196
1197         snprintf(sc->sc_name, sizeof(sc->sc_name), "%s",
1198             device_get_nameunit(dev));
1199
1200         device_set_usb_desc(dev);
1201
1202         DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, "
1203             "parent->selfpowered=%d\n",
1204             udev->depth,
1205             udev->flags.self_powered,
1206             parent_hub,
1207             parent_hub ?
1208             parent_hub->flags.self_powered : 0);
1209
1210         if (uhub_is_too_deep(udev)) {
1211                 DPRINTFN(0, "HUB at depth %d, "
1212                     "exceeds maximum. HUB ignored\n", (int)udev->depth);
1213                 goto error;
1214         }
1215
1216         if (!udev->flags.self_powered && parent_hub &&
1217             !parent_hub->flags.self_powered) {
1218                 DPRINTFN(0, "Bus powered HUB connected to "
1219                     "bus powered HUB. HUB ignored\n");
1220                 goto error;
1221         }
1222
1223         if (UHUB_IS_MULTI_TT(sc)) {
1224                 err = usbd_set_alt_interface_index(udev, 0, 1);
1225                 if (err) {
1226                         device_printf(dev, "MTT could not be enabled\n");
1227                         goto error;
1228                 }
1229                 device_printf(dev, "MTT enabled\n");
1230         }
1231
1232         /* get HUB descriptor */
1233
1234         DPRINTFN(2, "Getting HUB descriptor\n");
1235
1236         switch (udev->speed) {
1237         case USB_SPEED_LOW:
1238         case USB_SPEED_FULL:
1239         case USB_SPEED_HIGH:
1240                 /* assuming that there is one port */
1241                 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1);
1242                 if (err) {
1243                         DPRINTFN(0, "getting USB 2.0 HUB descriptor failed,"
1244                             "error=%s\n", usbd_errstr(err));
1245                         goto error;
1246                 }
1247                 /* get number of ports */
1248                 nports = hubdesc20.bNbrPorts;
1249
1250                 /* get power delay */
1251                 pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) +
1252                     usb_extra_power_up_time);
1253
1254                 /* get complete HUB descriptor */
1255                 if (nports >= 8) {
1256                         /* check number of ports */
1257                         if (nports > 127) {
1258                                 DPRINTFN(0, "Invalid number of USB 2.0 ports,"
1259                                     "error=%s\n", usbd_errstr(err));
1260                                 goto error;
1261                         }
1262                         /* get complete HUB descriptor */
1263                         err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports);
1264
1265                         if (err) {
1266                                 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed,"
1267                                     "error=%s\n", usbd_errstr(err));
1268                                 goto error;
1269                         }
1270                         if (hubdesc20.bNbrPorts != nports) {
1271                                 DPRINTFN(0, "Number of ports changed\n");
1272                                 goto error;
1273                         }
1274                 }
1275                 break;
1276         case USB_SPEED_SUPER:
1277                 if (udev->parent_hub != NULL) {
1278                         err = usbd_req_set_hub_depth(udev, NULL,
1279                             udev->depth - 1);
1280                         if (err) {
1281                                 DPRINTFN(0, "Setting USB 3.0 HUB depth failed,"
1282                                     "error=%s\n", usbd_errstr(err));
1283                                 goto error;
1284                         }
1285                 }
1286                 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1);
1287                 if (err) {
1288                         DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed,"
1289                             "error=%s\n", usbd_errstr(err));
1290                         goto error;
1291                 }
1292                 /* get number of ports */
1293                 nports = hubdesc30.bNbrPorts;
1294
1295                 /* get power delay */
1296                 pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) +
1297                     usb_extra_power_up_time);
1298
1299                 /* get complete HUB descriptor */
1300                 if (nports >= 8) {
1301                         /* check number of ports */
1302                         if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) {
1303                                 DPRINTFN(0, "Invalid number of USB 3.0 ports,"
1304                                     "error=%s\n", usbd_errstr(err));
1305                                 goto error;
1306                         }
1307                         /* get complete HUB descriptor */
1308                         err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports);
1309
1310                         if (err) {
1311                                 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed,"
1312                                     "error=%s\n", usbd_errstr(err));
1313                                 goto error;
1314                         }
1315                         if (hubdesc30.bNbrPorts != nports) {
1316                                 DPRINTFN(0, "Number of ports changed\n");
1317                                 goto error;
1318                         }
1319                 }
1320                 break;
1321         default:
1322                 DPRINTF("Assuming HUB has only one port\n");
1323                 /* default number of ports */
1324                 nports = 1;
1325                 /* default power delay */
1326                 pwrdly = ((10 * UHD_PWRON_FACTOR) + usb_extra_power_up_time);
1327                 break;
1328         }
1329         if (nports == 0) {
1330                 DPRINTFN(0, "portless HUB\n");
1331                 goto error;
1332         }
1333         hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports),
1334             M_USBDEV, M_WAITOK | M_ZERO);
1335
1336         if (hub == NULL) {
1337                 goto error;
1338         }
1339         udev->hub = hub;
1340
1341         /* initialize HUB structure */
1342         hub->hubsoftc = sc;
1343         hub->explore = &uhub_explore;
1344         hub->nports = nports;
1345         hub->hubudev = udev;
1346 #if USB_HAVE_TT_SUPPORT
1347         hub->tt_msg[0].hdr.pm_callback = &uhub_reset_tt_proc;
1348         hub->tt_msg[0].udev = udev;
1349         hub->tt_msg[1].hdr.pm_callback = &uhub_reset_tt_proc;
1350         hub->tt_msg[1].udev = udev;
1351 #endif
1352         /* if self powered hub, give ports maximum current */
1353         if (udev->flags.self_powered) {
1354                 hub->portpower = USB_MAX_POWER;
1355         } else {
1356                 hub->portpower = USB_MIN_POWER;
1357         }
1358
1359         /* set up interrupt pipe */
1360         iface_index = 0;
1361         if (udev->parent_hub == NULL) {
1362                 /* root HUB is special */
1363                 err = 0;
1364         } else {
1365                 /* normal HUB */
1366                 err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer,
1367                     uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx);
1368         }
1369         if (err) {
1370                 DPRINTFN(0, "cannot setup interrupt transfer, "
1371                     "errstr=%s\n", usbd_errstr(err));
1372                 goto error;
1373         }
1374         /* wait with power off for a while */
1375         usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME));
1376
1377         /*
1378          * To have the best chance of success we do things in the exact same
1379          * order as Windoze98.  This should not be necessary, but some
1380          * devices do not follow the USB specs to the letter.
1381          *
1382          * These are the events on the bus when a hub is attached:
1383          *  Get device and config descriptors (see attach code)
1384          *  Get hub descriptor (see above)
1385          *  For all ports
1386          *     turn on power
1387          *     wait for power to become stable
1388          * (all below happens in explore code)
1389          *  For all ports
1390          *     clear C_PORT_CONNECTION
1391          *  For all ports
1392          *     get port status
1393          *     if device connected
1394          *        wait 100 ms
1395          *        turn on reset
1396          *        wait
1397          *        clear C_PORT_RESET
1398          *        get port status
1399          *        proceed with device attachment
1400          */
1401
1402         /* XXX should check for none, individual, or ganged power? */
1403
1404         removable = 0;
1405
1406         for (x = 0; x != nports; x++) {
1407                 /* set up data structures */
1408                 struct usb_port *up = hub->ports + x;
1409
1410                 up->device_index = 0;
1411                 up->restartcnt = 0;
1412                 portno = x + 1;
1413
1414                 /* check if port is removable */
1415                 switch (udev->speed) {
1416                 case USB_SPEED_LOW:
1417                 case USB_SPEED_FULL:
1418                 case USB_SPEED_HIGH:
1419                         if (!UHD_NOT_REMOV(&hubdesc20, portno))
1420                                 removable++;
1421                         break;
1422                 case USB_SPEED_SUPER:
1423                         if (!UHD_NOT_REMOV(&hubdesc30, portno))
1424                                 removable++;
1425                         break;
1426                 default:
1427                         DPRINTF("Assuming removable port\n");
1428                         removable++;
1429                         break;
1430                 }
1431                 if (!err) {
1432                         /* turn the power on */
1433                         err = usbd_req_set_port_feature(udev, NULL,
1434                             portno, UHF_PORT_POWER);
1435                 }
1436                 if (err) {
1437                         DPRINTFN(0, "port %d power on failed, %s\n",
1438                             portno, usbd_errstr(err));
1439                 }
1440                 DPRINTF("turn on port %d power\n",
1441                     portno);
1442
1443                 /* wait for stable power */
1444                 usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly));
1445         }
1446
1447         device_printf(dev, "%d port%s with %d "
1448             "removable, %s powered\n", nports, (nports != 1) ? "s" : "",
1449             removable, udev->flags.self_powered ? "self" : "bus");
1450
1451         /* Start the interrupt endpoint, if any */
1452
1453         mtx_lock(&sc->sc_mtx);
1454         usbd_transfer_start(sc->sc_xfer[UHUB_INTR_TRANSFER]);
1455         mtx_unlock(&sc->sc_mtx);
1456
1457         /* Enable automatic power save on all USB HUBs */
1458
1459         usbd_set_power_mode(udev, USB_POWER_MODE_SAVE);
1460
1461         return (0);
1462
1463 error:
1464         usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER);
1465
1466         if (udev->hub) {
1467                 free(udev->hub, M_USBDEV);
1468                 udev->hub = NULL;
1469         }
1470
1471         mtx_destroy(&sc->sc_mtx);
1472
1473         return (ENXIO);
1474 }
1475
1476 /*
1477  * Called from process context when the hub is gone.
1478  * Detach all devices on active ports.
1479  */
1480 static int
1481 uhub_detach(device_t dev)
1482 {
1483         struct uhub_softc *sc = device_get_softc(dev);
1484         struct usb_hub *hub = sc->sc_udev->hub;
1485         struct usb_bus *bus = sc->sc_udev->bus;
1486         struct usb_device *child;
1487         uint8_t x;
1488
1489         if (hub == NULL)                /* must be partially working */
1490                 return (0);
1491
1492         /* Make sure interrupt transfer is gone. */
1493         usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER);
1494
1495         /* Detach all ports */
1496         for (x = 0; x != hub->nports; x++) {
1497
1498                 child = usb_bus_port_get_device(bus, hub->ports + x);
1499
1500                 if (child == NULL) {
1501                         continue;
1502                 }
1503
1504                 /*
1505                  * Free USB device and all subdevices, if any.
1506                  */
1507                 usb_free_device(child, 0);
1508         }
1509
1510 #if USB_HAVE_TT_SUPPORT
1511         /* Make sure our TT messages are not queued anywhere */
1512         USB_BUS_LOCK(bus);
1513         usb_proc_mwait(&bus->non_giant_callback_proc,
1514             &hub->tt_msg[0], &hub->tt_msg[1]);
1515         USB_BUS_UNLOCK(bus);
1516 #endif
1517
1518         free(hub, M_USBDEV);
1519         sc->sc_udev->hub = NULL;
1520
1521         mtx_destroy(&sc->sc_mtx);
1522
1523         return (0);
1524 }
1525
1526 static int
1527 uhub_suspend(device_t dev)
1528 {
1529         DPRINTF("\n");
1530         /* Sub-devices are not suspended here! */
1531         return (0);
1532 }
1533
1534 static int
1535 uhub_resume(device_t dev)
1536 {
1537         DPRINTF("\n");
1538         /* Sub-devices are not resumed here! */
1539         return (0);
1540 }
1541
1542 static void
1543 uhub_driver_added(device_t dev, driver_t *driver)
1544 {
1545         usb_needs_explore_all();
1546 }
1547
1548 struct hub_result {
1549         struct usb_device *udev;
1550         uint8_t portno;
1551         uint8_t iface_index;
1552 };
1553
1554 static void
1555 uhub_find_iface_index(struct usb_hub *hub, device_t child,
1556     struct hub_result *res)
1557 {
1558         struct usb_interface *iface;
1559         struct usb_device *udev;
1560         uint8_t nports;
1561         uint8_t x;
1562         uint8_t i;
1563
1564         nports = hub->nports;
1565         for (x = 0; x != nports; x++) {
1566                 udev = usb_bus_port_get_device(hub->hubudev->bus,
1567                     hub->ports + x);
1568                 if (!udev) {
1569                         continue;
1570                 }
1571                 for (i = 0; i != USB_IFACE_MAX; i++) {
1572                         iface = usbd_get_iface(udev, i);
1573                         if (iface &&
1574                             (iface->subdev == child)) {
1575                                 res->iface_index = i;
1576                                 res->udev = udev;
1577                                 res->portno = x + 1;
1578                                 return;
1579                         }
1580                 }
1581         }
1582         res->iface_index = 0;
1583         res->udev = NULL;
1584         res->portno = 0;
1585 }
1586
1587 static int
1588 uhub_child_location_string(device_t parent, device_t child,
1589     char *buf, size_t buflen)
1590 {
1591         struct uhub_softc *sc;
1592         struct usb_hub *hub;
1593         struct hub_result res;
1594
1595         if (!device_is_attached(parent)) {
1596                 if (buflen)
1597                         buf[0] = 0;
1598                 return (0);
1599         }
1600
1601         sc = device_get_softc(parent);
1602         hub = sc->sc_udev->hub;
1603
1604         mtx_lock(&Giant);
1605         uhub_find_iface_index(hub, child, &res);
1606         if (!res.udev) {
1607                 DPRINTF("device not on hub\n");
1608                 if (buflen) {
1609                         buf[0] = '\0';
1610                 }
1611                 goto done;
1612         }
1613         snprintf(buf, buflen, "bus=%u hubaddr=%u port=%u devaddr=%u interface=%u"
1614             " ugen=%s",
1615             (res.udev->parent_hub != NULL) ? res.udev->parent_hub->device_index : 0,
1616             res.portno, device_get_unit(res.udev->bus->bdev),
1617             res.udev->device_index, res.iface_index, res.udev->ugen_name);
1618 done:
1619         mtx_unlock(&Giant);
1620
1621         return (0);
1622 }
1623
1624 static int
1625 uhub_child_pnpinfo_string(device_t parent, device_t child,
1626     char *buf, size_t buflen)
1627 {
1628         struct uhub_softc *sc;
1629         struct usb_hub *hub;
1630         struct usb_interface *iface;
1631         struct hub_result res;
1632
1633         if (!device_is_attached(parent)) {
1634                 if (buflen)
1635                         buf[0] = 0;
1636                 return (0);
1637         }
1638
1639         sc = device_get_softc(parent);
1640         hub = sc->sc_udev->hub;
1641
1642         mtx_lock(&Giant);
1643         uhub_find_iface_index(hub, child, &res);
1644         if (!res.udev) {
1645                 DPRINTF("device not on hub\n");
1646                 if (buflen) {
1647                         buf[0] = '\0';
1648                 }
1649                 goto done;
1650         }
1651         iface = usbd_get_iface(res.udev, res.iface_index);
1652         if (iface && iface->idesc) {
1653                 snprintf(buf, buflen, "vendor=0x%04x product=0x%04x "
1654                     "devclass=0x%02x devsubclass=0x%02x "
1655                     "sernum=\"%s\" "
1656                     "release=0x%04x "
1657                     "mode=%s "
1658                     "intclass=0x%02x intsubclass=0x%02x "
1659                     "intprotocol=0x%02x" "%s%s",
1660                     UGETW(res.udev->ddesc.idVendor),
1661                     UGETW(res.udev->ddesc.idProduct),
1662                     res.udev->ddesc.bDeviceClass,
1663                     res.udev->ddesc.bDeviceSubClass,
1664                     usb_get_serial(res.udev),
1665                     UGETW(res.udev->ddesc.bcdDevice),
1666                     (res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device",
1667                     iface->idesc->bInterfaceClass,
1668                     iface->idesc->bInterfaceSubClass,
1669                     iface->idesc->bInterfaceProtocol,
1670                     iface->pnpinfo ? " " : "",
1671                     iface->pnpinfo ? iface->pnpinfo : "");
1672         } else {
1673                 if (buflen) {
1674                         buf[0] = '\0';
1675                 }
1676                 goto done;
1677         }
1678 done:
1679         mtx_unlock(&Giant);
1680
1681         return (0);
1682 }
1683
1684 /*
1685  * The USB Transaction Translator:
1686  * ===============================
1687  *
1688  * When doing LOW- and FULL-speed USB transfers accross a HIGH-speed
1689  * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT
1690  * USB transfers. To utilize bandwidth dynamically the "scatter and
1691  * gather" principle must be applied. This means that bandwidth must
1692  * be divided into equal parts of bandwidth. With regard to USB all
1693  * data is transferred in smaller packets with length
1694  * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is
1695  * not a constant!
1696  *
1697  * The bandwidth scheduler which I have implemented will simply pack
1698  * the USB transfers back to back until there is no more space in the
1699  * schedule. Out of the 8 microframes which the USB 2.0 standard
1700  * provides, only 6 are available for non-HIGH-speed devices. I have
1701  * reserved the first 4 microframes for ISOCHRONOUS transfers. The
1702  * last 2 microframes I have reserved for INTERRUPT transfers. Without
1703  * this division, it is very difficult to allocate and free bandwidth
1704  * dynamically.
1705  *
1706  * NOTE about the Transaction Translator in USB HUBs:
1707  *
1708  * USB HUBs have a very simple Transaction Translator, that will
1709  * simply pipeline all the SPLIT transactions. That means that the
1710  * transactions will be executed in the order they are queued!
1711  *
1712  */
1713
1714 /*------------------------------------------------------------------------*
1715  *      usb_intr_find_best_slot
1716  *
1717  * Return value:
1718  *   The best Transaction Translation slot for an interrupt endpoint.
1719  *------------------------------------------------------------------------*/
1720 static uint8_t
1721 usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start,
1722     uint8_t end, uint8_t mask)
1723 {
1724         usb_size_t min = (usb_size_t)-1;
1725         usb_size_t sum;
1726         uint8_t x;
1727         uint8_t y;
1728         uint8_t z;
1729
1730         y = 0;
1731
1732         /* find the last slot with lesser used bandwidth */
1733
1734         for (x = start; x < end; x++) {
1735
1736                 sum = 0;
1737
1738                 /* compute sum of bandwidth */
1739                 for (z = x; z < end; z++) {
1740                         if (mask & (1U << (z - x)))
1741                                 sum += ptr[z];
1742                 }
1743
1744                 /* check if the current multi-slot is more optimal */
1745                 if (min >= sum) {
1746                         min = sum;
1747                         y = x;
1748                 }
1749
1750                 /* check if the mask is about to be shifted out */
1751                 if (mask & (1U << (end - 1 - x)))
1752                         break;
1753         }
1754         return (y);
1755 }
1756
1757 /*------------------------------------------------------------------------*
1758  *      usb_hs_bandwidth_adjust
1759  *
1760  * This function will update the bandwith usage for the microframe
1761  * having index "slot" by "len" bytes. "len" can be negative.  If the
1762  * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX"
1763  * the "slot" argument will be replaced by the slot having least used
1764  * bandwidth. The "mask" argument is used for multi-slot allocations.
1765  *
1766  * Returns:
1767  *    The slot in which the bandwidth update was done: 0..7
1768  *------------------------------------------------------------------------*/
1769 static uint8_t
1770 usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len,
1771     uint8_t slot, uint8_t mask)
1772 {
1773         struct usb_bus *bus = udev->bus;
1774         struct usb_hub *hub;
1775         enum usb_dev_speed speed;
1776         uint8_t x;
1777
1778         USB_BUS_LOCK_ASSERT(bus, MA_OWNED);
1779
1780         speed = usbd_get_speed(udev);
1781
1782         switch (speed) {
1783         case USB_SPEED_LOW:
1784         case USB_SPEED_FULL:
1785                 if (speed == USB_SPEED_LOW) {
1786                         len *= 8;
1787                 }
1788                 /*
1789                  * The Host Controller Driver should have
1790                  * performed checks so that the lookup
1791                  * below does not result in a NULL pointer
1792                  * access.
1793                  */
1794
1795                 hub = udev->parent_hs_hub->hub;
1796                 if (slot >= USB_HS_MICRO_FRAMES_MAX) {
1797                         slot = usb_intr_find_best_slot(hub->uframe_usage,
1798                             USB_FS_ISOC_UFRAME_MAX, 6, mask);
1799                 }
1800                 for (x = slot; x < 8; x++) {
1801                         if (mask & (1U << (x - slot))) {
1802                                 hub->uframe_usage[x] += len;
1803                                 bus->uframe_usage[x] += len;
1804                         }
1805                 }
1806                 break;
1807         default:
1808                 if (slot >= USB_HS_MICRO_FRAMES_MAX) {
1809                         slot = usb_intr_find_best_slot(bus->uframe_usage, 0,
1810                             USB_HS_MICRO_FRAMES_MAX, mask);
1811                 }
1812                 for (x = slot; x < 8; x++) {
1813                         if (mask & (1U << (x - slot))) {
1814                                 bus->uframe_usage[x] += len;
1815                         }
1816                 }
1817                 break;
1818         }
1819         return (slot);
1820 }
1821
1822 /*------------------------------------------------------------------------*
1823  *      usb_hs_bandwidth_alloc
1824  *
1825  * This function is a wrapper function for "usb_hs_bandwidth_adjust()".
1826  *------------------------------------------------------------------------*/
1827 void
1828 usb_hs_bandwidth_alloc(struct usb_xfer *xfer)
1829 {
1830         struct usb_device *udev;
1831         uint8_t slot;
1832         uint8_t mask;
1833         uint8_t speed;
1834
1835         udev = xfer->xroot->udev;
1836
1837         if (udev->flags.usb_mode != USB_MODE_HOST)
1838                 return;         /* not supported */
1839
1840         xfer->endpoint->refcount_bw++;
1841         if (xfer->endpoint->refcount_bw != 1)
1842                 return;         /* already allocated */
1843
1844         speed = usbd_get_speed(udev);
1845
1846         switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) {
1847         case UE_INTERRUPT:
1848                 /* allocate a microframe slot */
1849
1850                 mask = 0x01;
1851                 slot = usb_hs_bandwidth_adjust(udev,
1852                     xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask);
1853
1854                 xfer->endpoint->usb_uframe = slot;
1855                 xfer->endpoint->usb_smask = mask << slot;
1856
1857                 if ((speed != USB_SPEED_FULL) &&
1858                     (speed != USB_SPEED_LOW)) {
1859                         xfer->endpoint->usb_cmask = 0x00 ;
1860                 } else {
1861                         xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE;
1862                 }
1863                 break;
1864
1865         case UE_ISOCHRONOUS:
1866                 switch (usbd_xfer_get_fps_shift(xfer)) {
1867                 case 0:
1868                         mask = 0xFF;
1869                         break;
1870                 case 1:
1871                         mask = 0x55;
1872                         break;
1873                 case 2:
1874                         mask = 0x11;
1875                         break;
1876                 default:
1877                         mask = 0x01;
1878                         break;
1879                 }
1880
1881                 /* allocate a microframe multi-slot */
1882
1883                 slot = usb_hs_bandwidth_adjust(udev,
1884                     xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask);
1885
1886                 xfer->endpoint->usb_uframe = slot;
1887                 xfer->endpoint->usb_cmask = 0;
1888                 xfer->endpoint->usb_smask = mask << slot;
1889                 break;
1890
1891         default:
1892                 xfer->endpoint->usb_uframe = 0;
1893                 xfer->endpoint->usb_cmask = 0;
1894                 xfer->endpoint->usb_smask = 0;
1895                 break;
1896         }
1897
1898         DPRINTFN(11, "slot=%d, mask=0x%02x\n",
1899             xfer->endpoint->usb_uframe,
1900             xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe);
1901 }
1902
1903 /*------------------------------------------------------------------------*
1904  *      usb_hs_bandwidth_free
1905  *
1906  * This function is a wrapper function for "usb_hs_bandwidth_adjust()".
1907  *------------------------------------------------------------------------*/
1908 void
1909 usb_hs_bandwidth_free(struct usb_xfer *xfer)
1910 {
1911         struct usb_device *udev;
1912         uint8_t slot;
1913         uint8_t mask;
1914
1915         udev = xfer->xroot->udev;
1916
1917         if (udev->flags.usb_mode != USB_MODE_HOST)
1918                 return;         /* not supported */
1919
1920         xfer->endpoint->refcount_bw--;
1921         if (xfer->endpoint->refcount_bw != 0)
1922                 return;         /* still allocated */
1923
1924         switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) {
1925         case UE_INTERRUPT:
1926         case UE_ISOCHRONOUS:
1927
1928                 slot = xfer->endpoint->usb_uframe;
1929                 mask = xfer->endpoint->usb_smask;
1930
1931                 /* free microframe slot(s): */
1932                 usb_hs_bandwidth_adjust(udev,
1933                     -xfer->max_frame_size, slot, mask >> slot);
1934
1935                 DPRINTFN(11, "slot=%d, mask=0x%02x\n",
1936                     slot, mask >> slot);
1937
1938                 xfer->endpoint->usb_uframe = 0;
1939                 xfer->endpoint->usb_cmask = 0;
1940                 xfer->endpoint->usb_smask = 0;
1941                 break;
1942
1943         default:
1944                 break;
1945         }
1946 }
1947
1948 /*------------------------------------------------------------------------*
1949  *      usb_isoc_time_expand
1950  *
1951  * This function will expand the time counter from 7-bit to 16-bit.
1952  *
1953  * Returns:
1954  *   16-bit isochronous time counter.
1955  *------------------------------------------------------------------------*/
1956 uint16_t
1957 usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr)
1958 {
1959         uint16_t rem;
1960
1961         USB_BUS_LOCK_ASSERT(bus, MA_OWNED);
1962
1963         rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1);
1964
1965         isoc_time_curr &= (USB_ISOC_TIME_MAX - 1);
1966
1967         if (isoc_time_curr < rem) {
1968                 /* the time counter wrapped around */
1969                 bus->isoc_time_last += USB_ISOC_TIME_MAX;
1970         }
1971         /* update the remainder */
1972
1973         bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1);
1974         bus->isoc_time_last |= isoc_time_curr;
1975
1976         return (bus->isoc_time_last);
1977 }
1978
1979 /*------------------------------------------------------------------------*
1980  *      usbd_fs_isoc_schedule_alloc_slot
1981  *
1982  * This function will allocate bandwidth for an isochronous FULL speed
1983  * transaction in the FULL speed schedule.
1984  *
1985  * Returns:
1986  *    <8: Success
1987  * Else: Error
1988  *------------------------------------------------------------------------*/
1989 #if USB_HAVE_TT_SUPPORT
1990 uint8_t
1991 usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time)
1992 {
1993         struct usb_xfer *xfer;
1994         struct usb_xfer *pipe_xfer;
1995         struct usb_bus *bus;
1996         usb_frlength_t len;
1997         usb_frlength_t data_len;
1998         uint16_t delta;
1999         uint16_t slot;
2000         uint8_t retval;
2001
2002         data_len = 0;
2003         slot = 0;
2004
2005         bus = isoc_xfer->xroot->bus;
2006
2007         TAILQ_FOREACH(xfer, &bus->intr_q.head, wait_entry) {
2008
2009                 /* skip self, if any */
2010
2011                 if (xfer == isoc_xfer)
2012                         continue;
2013
2014                 /* check if this USB transfer is going through the same TT */
2015
2016                 if (xfer->xroot->udev->parent_hs_hub !=
2017                     isoc_xfer->xroot->udev->parent_hs_hub) {
2018                         continue;
2019                 }
2020                 if ((isoc_xfer->xroot->udev->parent_hs_hub->
2021                     ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) &&
2022                     (xfer->xroot->udev->hs_port_no !=
2023                     isoc_xfer->xroot->udev->hs_port_no)) {
2024                         continue;
2025                 }
2026                 if (xfer->endpoint->methods != isoc_xfer->endpoint->methods)
2027                         continue;
2028
2029                 /* check if isoc_time is part of this transfer */
2030
2031                 delta = xfer->isoc_time_complete - isoc_time;
2032                 if (delta > 0 && delta <= xfer->nframes) {
2033                         delta = xfer->nframes - delta;
2034
2035                         len = xfer->frlengths[delta];
2036                         len += 8;
2037                         len *= 7;
2038                         len /= 6;
2039
2040                         data_len += len;
2041                 }
2042
2043                 /* check double buffered transfers */
2044
2045                 TAILQ_FOREACH(pipe_xfer, &xfer->endpoint->endpoint_q.head,
2046                     wait_entry) {
2047
2048                         /* skip self, if any */
2049
2050                         if (pipe_xfer == isoc_xfer)
2051                                 continue;
2052
2053                         /* check if isoc_time is part of this transfer */
2054
2055                         delta = pipe_xfer->isoc_time_complete - isoc_time;
2056                         if (delta > 0 && delta <= pipe_xfer->nframes) {
2057                                 delta = pipe_xfer->nframes - delta;
2058
2059                                 len = pipe_xfer->frlengths[delta];
2060                                 len += 8;
2061                                 len *= 7;
2062                                 len /= 6;
2063
2064                                 data_len += len;
2065                         }
2066                 }
2067         }
2068
2069         while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) {
2070                 data_len -= USB_FS_BYTES_PER_HS_UFRAME;
2071                 slot++;
2072         }
2073
2074         /* check for overflow */
2075
2076         if (slot >= USB_FS_ISOC_UFRAME_MAX)
2077                 return (255);
2078
2079         retval = slot;
2080
2081         delta = isoc_xfer->isoc_time_complete - isoc_time;
2082         if (delta > 0 && delta <= isoc_xfer->nframes) {
2083                 delta = isoc_xfer->nframes - delta;
2084
2085                 len = isoc_xfer->frlengths[delta];
2086                 len += 8;
2087                 len *= 7;
2088                 len /= 6;
2089
2090                 data_len += len;
2091         }
2092
2093         while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) {
2094                 data_len -= USB_FS_BYTES_PER_HS_UFRAME;
2095                 slot++;
2096         }
2097
2098         /* check for overflow */
2099
2100         if (slot >= USB_FS_ISOC_UFRAME_MAX)
2101                 return (255);
2102
2103         return (retval);
2104 }
2105 #endif
2106
2107 /*------------------------------------------------------------------------*
2108  *      usb_bus_port_get_device
2109  *
2110  * This function is NULL safe.
2111  *------------------------------------------------------------------------*/
2112 struct usb_device *
2113 usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up)
2114 {
2115         if ((bus == NULL) || (up == NULL)) {
2116                 /* be NULL safe */
2117                 return (NULL);
2118         }
2119         if (up->device_index == 0) {
2120                 /* nothing to do */
2121                 return (NULL);
2122         }
2123         return (bus->devices[up->device_index]);
2124 }
2125
2126 /*------------------------------------------------------------------------*
2127  *      usb_bus_port_set_device
2128  *
2129  * This function is NULL safe.
2130  *------------------------------------------------------------------------*/
2131 void
2132 usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up,
2133     struct usb_device *udev, uint8_t device_index)
2134 {
2135         if (bus == NULL) {
2136                 /* be NULL safe */
2137                 return;
2138         }
2139         /*
2140          * There is only one case where we don't
2141          * have an USB port, and that is the Root Hub!
2142          */
2143         if (up) {
2144                 if (udev) {
2145                         up->device_index = device_index;
2146                 } else {
2147                         device_index = up->device_index;
2148                         up->device_index = 0;
2149                 }
2150         }
2151         /*
2152          * Make relationships to our new device
2153          */
2154         if (device_index != 0) {
2155 #if USB_HAVE_UGEN
2156                 mtx_lock(&usb_ref_lock);
2157 #endif
2158                 bus->devices[device_index] = udev;
2159 #if USB_HAVE_UGEN
2160                 mtx_unlock(&usb_ref_lock);
2161 #endif
2162         }
2163         /*
2164          * Debug print
2165          */
2166         DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev);
2167 }
2168
2169 /*------------------------------------------------------------------------*
2170  *      usb_needs_explore
2171  *
2172  * This functions is called when the USB event thread needs to run.
2173  *------------------------------------------------------------------------*/
2174 void
2175 usb_needs_explore(struct usb_bus *bus, uint8_t do_probe)
2176 {
2177         uint8_t do_unlock;
2178
2179         DPRINTF("\n");
2180
2181         if (bus == NULL) {
2182                 DPRINTF("No bus pointer!\n");
2183                 return;
2184         }
2185         if ((bus->devices == NULL) ||
2186             (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) {
2187                 DPRINTF("No root HUB\n");
2188                 return;
2189         }
2190         if (mtx_owned(&bus->bus_mtx)) {
2191                 do_unlock = 0;
2192         } else {
2193                 USB_BUS_LOCK(bus);
2194                 do_unlock = 1;
2195         }
2196         if (do_probe) {
2197                 bus->do_probe = 1;
2198         }
2199         if (usb_proc_msignal(&bus->explore_proc,
2200             &bus->explore_msg[0], &bus->explore_msg[1])) {
2201                 /* ignore */
2202         }
2203         if (do_unlock) {
2204                 USB_BUS_UNLOCK(bus);
2205         }
2206 }
2207
2208 /*------------------------------------------------------------------------*
2209  *      usb_needs_explore_all
2210  *
2211  * This function is called whenever a new driver is loaded and will
2212  * cause that all USB busses are re-explored.
2213  *------------------------------------------------------------------------*/
2214 void
2215 usb_needs_explore_all(void)
2216 {
2217         struct usb_bus *bus;
2218         devclass_t dc;
2219         device_t dev;
2220         int max;
2221
2222         DPRINTFN(3, "\n");
2223
2224         dc = usb_devclass_ptr;
2225         if (dc == NULL) {
2226                 DPRINTFN(0, "no devclass\n");
2227                 return;
2228         }
2229         /*
2230          * Explore all USB busses in parallell.
2231          */
2232         max = devclass_get_maxunit(dc);
2233         while (max >= 0) {
2234                 dev = devclass_get_device(dc, max);
2235                 if (dev) {
2236                         bus = device_get_softc(dev);
2237                         if (bus) {
2238                                 usb_needs_explore(bus, 1);
2239                         }
2240                 }
2241                 max--;
2242         }
2243 }
2244
2245 /*------------------------------------------------------------------------*
2246  *      usb_bus_power_update
2247  *
2248  * This function will ensure that all USB devices on the given bus are
2249  * properly suspended or resumed according to the device transfer
2250  * state.
2251  *------------------------------------------------------------------------*/
2252 #if USB_HAVE_POWERD
2253 void
2254 usb_bus_power_update(struct usb_bus *bus)
2255 {
2256         usb_needs_explore(bus, 0 /* no probe */ );
2257 }
2258 #endif
2259
2260 /*------------------------------------------------------------------------*
2261  *      usbd_transfer_power_ref
2262  *
2263  * This function will modify the power save reference counts and
2264  * wakeup the USB device associated with the given USB transfer, if
2265  * needed.
2266  *------------------------------------------------------------------------*/
2267 #if USB_HAVE_POWERD
2268 void
2269 usbd_transfer_power_ref(struct usb_xfer *xfer, int val)
2270 {
2271         static const usb_power_mask_t power_mask[4] = {
2272                 [UE_CONTROL] = USB_HW_POWER_CONTROL,
2273                 [UE_BULK] = USB_HW_POWER_BULK,
2274                 [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT,
2275                 [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC,
2276         };
2277         struct usb_device *udev;
2278         uint8_t needs_explore;
2279         uint8_t needs_hw_power;
2280         uint8_t xfer_type;
2281
2282         udev = xfer->xroot->udev;
2283
2284         if (udev->device_index == USB_ROOT_HUB_ADDR) {
2285                 /* no power save for root HUB */
2286                 return;
2287         }
2288         USB_BUS_LOCK(udev->bus);
2289
2290         xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE;
2291
2292         udev->pwr_save.last_xfer_time = ticks;
2293         udev->pwr_save.type_refs[xfer_type] += val;
2294
2295         if (xfer->flags_int.control_xfr) {
2296                 udev->pwr_save.read_refs += val;
2297                 if (xfer->flags_int.usb_mode == USB_MODE_HOST) {
2298                         /*
2299                          * It is not allowed to suspend during a
2300                          * control transfer:
2301                          */
2302                         udev->pwr_save.write_refs += val;
2303                 }
2304         } else if (USB_GET_DATA_ISREAD(xfer)) {
2305                 udev->pwr_save.read_refs += val;
2306         } else {
2307                 udev->pwr_save.write_refs += val;
2308         }
2309
2310         if (val > 0) {
2311                 if (udev->flags.self_suspended)
2312                         needs_explore = usb_peer_should_wakeup(udev);
2313                 else
2314                         needs_explore = 0;
2315
2316                 if (!(udev->bus->hw_power_state & power_mask[xfer_type])) {
2317                         DPRINTF("Adding type %u to power state\n", xfer_type);
2318                         udev->bus->hw_power_state |= power_mask[xfer_type];
2319                         needs_hw_power = 1;
2320                 } else {
2321                         needs_hw_power = 0;
2322                 }
2323         } else {
2324                 needs_explore = 0;
2325                 needs_hw_power = 0;
2326         }
2327
2328         USB_BUS_UNLOCK(udev->bus);
2329
2330         if (needs_explore) {
2331                 DPRINTF("update\n");
2332                 usb_bus_power_update(udev->bus);
2333         } else if (needs_hw_power) {
2334                 DPRINTF("needs power\n");
2335                 if (udev->bus->methods->set_hw_power != NULL) {
2336                         (udev->bus->methods->set_hw_power) (udev->bus);
2337                 }
2338         }
2339 }
2340 #endif
2341
2342 /*------------------------------------------------------------------------*
2343  *      usb_peer_should_wakeup
2344  *
2345  * This function returns non-zero if the current device should wake up.
2346  *------------------------------------------------------------------------*/
2347 static uint8_t
2348 usb_peer_should_wakeup(struct usb_device *udev)
2349 {
2350         return (((udev->power_mode == USB_POWER_MODE_ON) &&
2351             (udev->flags.usb_mode == USB_MODE_HOST)) ||
2352             (udev->driver_added_refcount != udev->bus->driver_added_refcount) ||
2353             (udev->re_enumerate_wait != USB_RE_ENUM_DONE) ||
2354             (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) ||
2355             (udev->pwr_save.write_refs != 0) ||
2356             ((udev->pwr_save.read_refs != 0) &&
2357             (udev->flags.usb_mode == USB_MODE_HOST) &&
2358             (usb_peer_can_wakeup(udev) == 0)));
2359 }
2360
2361 /*------------------------------------------------------------------------*
2362  *      usb_bus_powerd
2363  *
2364  * This function implements the USB power daemon and is called
2365  * regularly from the USB explore thread.
2366  *------------------------------------------------------------------------*/
2367 #if USB_HAVE_POWERD
2368 void
2369 usb_bus_powerd(struct usb_bus *bus)
2370 {
2371         struct usb_device *udev;
2372         usb_ticks_t temp;
2373         usb_ticks_t limit;
2374         usb_ticks_t mintime;
2375         usb_size_t type_refs[5];
2376         uint8_t x;
2377
2378         limit = usb_power_timeout;
2379         if (limit == 0)
2380                 limit = hz;
2381         else if (limit > 255)
2382                 limit = 255 * hz;
2383         else
2384                 limit = limit * hz;
2385
2386         DPRINTF("bus=%p\n", bus);
2387
2388         USB_BUS_LOCK(bus);
2389
2390         /*
2391          * The root HUB device is never suspended
2392          * and we simply skip it.
2393          */
2394         for (x = USB_ROOT_HUB_ADDR + 1;
2395             x != bus->devices_max; x++) {
2396
2397                 udev = bus->devices[x];
2398                 if (udev == NULL)
2399                         continue;
2400
2401                 temp = ticks - udev->pwr_save.last_xfer_time;
2402
2403                 if (usb_peer_should_wakeup(udev)) {
2404                         /* check if we are suspended */
2405                         if (udev->flags.self_suspended != 0) {
2406                                 USB_BUS_UNLOCK(bus);
2407                                 usb_dev_resume_peer(udev);
2408                                 USB_BUS_LOCK(bus);
2409                         }
2410                 } else if ((temp >= limit) &&
2411                     (udev->flags.usb_mode == USB_MODE_HOST) &&
2412                     (udev->flags.self_suspended == 0)) {
2413                         /* try to do suspend */
2414
2415                         USB_BUS_UNLOCK(bus);
2416                         usb_dev_suspend_peer(udev);
2417                         USB_BUS_LOCK(bus);
2418                 }
2419         }
2420
2421         /* reset counters */
2422
2423         mintime = (usb_ticks_t)-1;
2424         type_refs[0] = 0;
2425         type_refs[1] = 0;
2426         type_refs[2] = 0;
2427         type_refs[3] = 0;
2428         type_refs[4] = 0;
2429
2430         /* Re-loop all the devices to get the actual state */
2431
2432         for (x = USB_ROOT_HUB_ADDR + 1;
2433             x != bus->devices_max; x++) {
2434
2435                 udev = bus->devices[x];
2436                 if (udev == NULL)
2437                         continue;
2438
2439                 /* we found a non-Root-Hub USB device */
2440                 type_refs[4] += 1;
2441
2442                 /* "last_xfer_time" can be updated by a resume */
2443                 temp = ticks - udev->pwr_save.last_xfer_time;
2444
2445                 /*
2446                  * Compute minimum time since last transfer for the complete
2447                  * bus:
2448                  */
2449                 if (temp < mintime)
2450                         mintime = temp;
2451
2452                 if (udev->flags.self_suspended == 0) {
2453                         type_refs[0] += udev->pwr_save.type_refs[0];
2454                         type_refs[1] += udev->pwr_save.type_refs[1];
2455                         type_refs[2] += udev->pwr_save.type_refs[2];
2456                         type_refs[3] += udev->pwr_save.type_refs[3];
2457                 }
2458         }
2459
2460         if (mintime >= (usb_ticks_t)(1 * hz)) {
2461                 /* recompute power masks */
2462                 DPRINTF("Recomputing power masks\n");
2463                 bus->hw_power_state = 0;
2464                 if (type_refs[UE_CONTROL] != 0)
2465                         bus->hw_power_state |= USB_HW_POWER_CONTROL;
2466                 if (type_refs[UE_BULK] != 0)
2467                         bus->hw_power_state |= USB_HW_POWER_BULK;
2468                 if (type_refs[UE_INTERRUPT] != 0)
2469                         bus->hw_power_state |= USB_HW_POWER_INTERRUPT;
2470                 if (type_refs[UE_ISOCHRONOUS] != 0)
2471                         bus->hw_power_state |= USB_HW_POWER_ISOC;
2472                 if (type_refs[4] != 0)
2473                         bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB;
2474         }
2475         USB_BUS_UNLOCK(bus);
2476
2477         if (bus->methods->set_hw_power != NULL) {
2478                 /* always update hardware power! */
2479                 (bus->methods->set_hw_power) (bus);
2480         }
2481         return;
2482 }
2483 #endif
2484
2485 /*------------------------------------------------------------------------*
2486  *      usb_dev_resume_peer
2487  *
2488  * This function will resume an USB peer and do the required USB
2489  * signalling to get an USB device out of the suspended state.
2490  *------------------------------------------------------------------------*/
2491 static void
2492 usb_dev_resume_peer(struct usb_device *udev)
2493 {
2494         struct usb_bus *bus;
2495         int err;
2496
2497         /* be NULL safe */
2498         if (udev == NULL)
2499                 return;
2500
2501         /* check if already resumed */
2502         if (udev->flags.self_suspended == 0)
2503                 return;
2504
2505         /* we need a parent HUB to do resume */
2506         if (udev->parent_hub == NULL)
2507                 return;
2508
2509         DPRINTF("udev=%p\n", udev);
2510
2511         if ((udev->flags.usb_mode == USB_MODE_DEVICE) &&
2512             (udev->flags.remote_wakeup == 0)) {
2513                 /*
2514                  * If the host did not set the remote wakeup feature, we can
2515                  * not wake it up either!
2516                  */
2517                 DPRINTF("remote wakeup is not set!\n");
2518                 return;
2519         }
2520         /* get bus pointer */
2521         bus = udev->bus;
2522
2523         /* resume parent hub first */
2524         usb_dev_resume_peer(udev->parent_hub);
2525
2526         /* reduce chance of instant resume failure by waiting a little bit */
2527         usb_pause_mtx(NULL, USB_MS_TO_TICKS(20));
2528
2529         if (usb_device_20_compatible(udev)) {
2530                 /* resume current port (Valid in Host and Device Mode) */
2531                 err = usbd_req_clear_port_feature(udev->parent_hub,
2532                     NULL, udev->port_no, UHF_PORT_SUSPEND);
2533                 if (err) {
2534                         DPRINTFN(0, "Resuming port failed\n");
2535                         return;
2536                 }
2537         } else {
2538                 /* resume current port (Valid in Host and Device Mode) */
2539                 err = usbd_req_set_port_link_state(udev->parent_hub,
2540                     NULL, udev->port_no, UPS_PORT_LS_U0);
2541                 if (err) {
2542                         DPRINTFN(0, "Resuming port failed\n");
2543                         return;
2544                 }
2545         }
2546
2547         /* resume settle time */
2548         usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay));
2549
2550         if (bus->methods->device_resume != NULL) {
2551                 /* resume USB device on the USB controller */
2552                 (bus->methods->device_resume) (udev);
2553         }
2554         USB_BUS_LOCK(bus);
2555         /* set that this device is now resumed */
2556         udev->flags.self_suspended = 0;
2557 #if USB_HAVE_POWERD
2558         /* make sure that we don't go into suspend right away */
2559         udev->pwr_save.last_xfer_time = ticks;
2560
2561         /* make sure the needed power masks are on */
2562         if (udev->pwr_save.type_refs[UE_CONTROL] != 0)
2563                 bus->hw_power_state |= USB_HW_POWER_CONTROL;
2564         if (udev->pwr_save.type_refs[UE_BULK] != 0)
2565                 bus->hw_power_state |= USB_HW_POWER_BULK;
2566         if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0)
2567                 bus->hw_power_state |= USB_HW_POWER_INTERRUPT;
2568         if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0)
2569                 bus->hw_power_state |= USB_HW_POWER_ISOC;
2570 #endif
2571         USB_BUS_UNLOCK(bus);
2572
2573         if (bus->methods->set_hw_power != NULL) {
2574                 /* always update hardware power! */
2575                 (bus->methods->set_hw_power) (bus);
2576         }
2577
2578         usbd_sr_lock(udev);
2579
2580         /* notify all sub-devices about resume */
2581         err = usb_suspend_resume(udev, 0);
2582
2583         usbd_sr_unlock(udev);
2584
2585         /* check if peer has wakeup capability */
2586         if (usb_peer_can_wakeup(udev)) {
2587                 /* clear remote wakeup */
2588                 err = usbd_req_clear_device_feature(udev,
2589                     NULL, UF_DEVICE_REMOTE_WAKEUP);
2590                 if (err) {
2591                         DPRINTFN(0, "Clearing device "
2592                             "remote wakeup failed: %s\n",
2593                             usbd_errstr(err));
2594                 }
2595         }
2596 }
2597
2598 /*------------------------------------------------------------------------*
2599  *      usb_dev_suspend_peer
2600  *
2601  * This function will suspend an USB peer and do the required USB
2602  * signalling to get an USB device into the suspended state.
2603  *------------------------------------------------------------------------*/
2604 static void
2605 usb_dev_suspend_peer(struct usb_device *udev)
2606 {
2607         struct usb_device *child;
2608         int err;
2609         uint8_t x;
2610         uint8_t nports;
2611
2612 repeat:
2613         /* be NULL safe */
2614         if (udev == NULL)
2615                 return;
2616
2617         /* check if already suspended */
2618         if (udev->flags.self_suspended)
2619                 return;
2620
2621         /* we need a parent HUB to do suspend */
2622         if (udev->parent_hub == NULL)
2623                 return;
2624
2625         DPRINTF("udev=%p\n", udev);
2626
2627         /* check if the current device is a HUB */
2628         if (udev->hub != NULL) {
2629                 nports = udev->hub->nports;
2630
2631                 /* check if all devices on the HUB are suspended */
2632                 for (x = 0; x != nports; x++) {
2633                         child = usb_bus_port_get_device(udev->bus,
2634                             udev->hub->ports + x);
2635
2636                         if (child == NULL)
2637                                 continue;
2638
2639                         if (child->flags.self_suspended)
2640                                 continue;
2641
2642                         DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1);
2643                         return;
2644                 }
2645         }
2646
2647         if (usb_peer_can_wakeup(udev)) {
2648                 /*
2649                  * This request needs to be done before we set
2650                  * "udev->flags.self_suspended":
2651                  */
2652
2653                 /* allow device to do remote wakeup */
2654                 err = usbd_req_set_device_feature(udev,
2655                     NULL, UF_DEVICE_REMOTE_WAKEUP);
2656                 if (err) {
2657                         DPRINTFN(0, "Setting device "
2658                             "remote wakeup failed\n");
2659                 }
2660         }
2661
2662         USB_BUS_LOCK(udev->bus);
2663         /*
2664          * Checking for suspend condition and setting suspended bit
2665          * must be atomic!
2666          */
2667         err = usb_peer_should_wakeup(udev);
2668         if (err == 0) {
2669                 /*
2670                  * Set that this device is suspended. This variable
2671                  * must be set before calling USB controller suspend
2672                  * callbacks.
2673                  */
2674                 udev->flags.self_suspended = 1;
2675         }
2676         USB_BUS_UNLOCK(udev->bus);
2677
2678         if (err != 0) {
2679                 if (usb_peer_can_wakeup(udev)) {
2680                         /* allow device to do remote wakeup */
2681                         err = usbd_req_clear_device_feature(udev,
2682                             NULL, UF_DEVICE_REMOTE_WAKEUP);
2683                         if (err) {
2684                                 DPRINTFN(0, "Setting device "
2685                                     "remote wakeup failed\n");
2686                         }
2687                 }
2688
2689                 if (udev->flags.usb_mode == USB_MODE_DEVICE) {
2690                         /* resume parent HUB first */
2691                         usb_dev_resume_peer(udev->parent_hub);
2692
2693                         /* reduce chance of instant resume failure by waiting a little bit */
2694                         usb_pause_mtx(NULL, USB_MS_TO_TICKS(20));
2695
2696                         /* resume current port (Valid in Host and Device Mode) */
2697                         err = usbd_req_clear_port_feature(udev->parent_hub,
2698                             NULL, udev->port_no, UHF_PORT_SUSPEND);
2699
2700                         /* resume settle time */
2701                         usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay));
2702                 }
2703                 DPRINTF("Suspend was cancelled!\n");
2704                 return;
2705         }
2706
2707         usbd_sr_lock(udev);
2708
2709         /* notify all sub-devices about suspend */
2710         err = usb_suspend_resume(udev, 1);
2711
2712         usbd_sr_unlock(udev);
2713
2714         if (udev->bus->methods->device_suspend != NULL) {
2715                 usb_timeout_t temp;
2716
2717                 /* suspend device on the USB controller */
2718                 (udev->bus->methods->device_suspend) (udev);
2719
2720                 /* do DMA delay */
2721                 temp = usbd_get_dma_delay(udev);
2722                 if (temp != 0)
2723                         usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp));
2724
2725         }
2726
2727         if (usb_device_20_compatible(udev)) {
2728                 /* suspend current port */
2729                 err = usbd_req_set_port_feature(udev->parent_hub,
2730                     NULL, udev->port_no, UHF_PORT_SUSPEND);
2731                 if (err) {
2732                         DPRINTFN(0, "Suspending port failed\n");
2733                         return;
2734                 }
2735         } else {
2736                 /* suspend current port */
2737                 err = usbd_req_set_port_link_state(udev->parent_hub,
2738                     NULL, udev->port_no, UPS_PORT_LS_U3);
2739                 if (err) {
2740                         DPRINTFN(0, "Suspending port failed\n");
2741                         return;
2742                 }
2743         }
2744
2745         udev = udev->parent_hub;
2746         goto repeat;
2747 }
2748
2749 /*------------------------------------------------------------------------*
2750  *      usbd_set_power_mode
2751  *
2752  * This function will set the power mode, see USB_POWER_MODE_XXX for a
2753  * USB device.
2754  *------------------------------------------------------------------------*/
2755 void
2756 usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode)
2757 {
2758         /* filter input argument */
2759         if ((power_mode != USB_POWER_MODE_ON) &&
2760             (power_mode != USB_POWER_MODE_OFF))
2761                 power_mode = USB_POWER_MODE_SAVE;
2762
2763         power_mode = usbd_filter_power_mode(udev, power_mode);
2764
2765         udev->power_mode = power_mode;  /* update copy of power mode */
2766
2767 #if USB_HAVE_POWERD
2768         usb_bus_power_update(udev->bus);
2769 #else
2770         usb_needs_explore(udev->bus, 0 /* no probe */ );
2771 #endif
2772 }
2773
2774 /*------------------------------------------------------------------------*
2775  *      usbd_filter_power_mode
2776  *
2777  * This function filters the power mode based on hardware requirements.
2778  *------------------------------------------------------------------------*/
2779 uint8_t
2780 usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode)
2781 {
2782         struct usb_bus_methods *mtod;
2783         int8_t temp;
2784
2785         mtod = udev->bus->methods;
2786         temp = -1;
2787
2788         if (mtod->get_power_mode != NULL)
2789                 (mtod->get_power_mode) (udev, &temp);
2790
2791         /* check if we should not filter */
2792         if (temp < 0)
2793                 return (power_mode);
2794
2795         /* use fixed power mode given by hardware driver */
2796         return (temp);
2797 }
2798
2799 /*------------------------------------------------------------------------*
2800  *      usbd_start_re_enumerate
2801  *
2802  * This function starts re-enumeration of the given USB device. This
2803  * function does not need to be called BUS-locked. This function does
2804  * not wait until the re-enumeration is completed.
2805  *------------------------------------------------------------------------*/
2806 void
2807 usbd_start_re_enumerate(struct usb_device *udev)
2808 {
2809         if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) {
2810                 udev->re_enumerate_wait = USB_RE_ENUM_START;
2811                 usb_needs_explore(udev->bus, 0);
2812         }
2813 }
2814
2815 /*-----------------------------------------------------------------------*
2816  *      usbd_start_set_config
2817  *
2818  * This function starts setting a USB configuration. This function
2819  * does not need to be called BUS-locked. This function does not wait
2820  * until the set USB configuratino is completed.
2821  *------------------------------------------------------------------------*/
2822 usb_error_t
2823 usbd_start_set_config(struct usb_device *udev, uint8_t index)
2824 {
2825         if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) {
2826                 if (udev->curr_config_index == index) {
2827                         /* no change needed */
2828                         return (0);
2829                 }
2830                 udev->next_config_index = index;
2831                 udev->re_enumerate_wait = USB_RE_ENUM_SET_CONFIG;
2832                 usb_needs_explore(udev->bus, 0);
2833                 return (0);
2834         } else if (udev->re_enumerate_wait == USB_RE_ENUM_SET_CONFIG) {
2835                 if (udev->next_config_index == index) {
2836                         /* no change needed */
2837                         return (0);
2838                 }
2839         }
2840         return (USB_ERR_PENDING_REQUESTS);
2841 }