]> CyberLeo.Net >> Repos - FreeBSD/stable/8.git/blob - sys/dev/usb/usbdi.h
MFC r222786 and r222790:
[FreeBSD/stable/8.git] / sys / dev / usb / usbdi.h
1 /*-
2  * Copyright (c) 2009 Andrew Thompson
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  *
24  * $FreeBSD$
25  */
26 #ifndef _USB_USBDI_H_
27 #define _USB_USBDI_H_
28
29 struct usb_fifo;
30 struct usb_xfer;
31 struct usb_device;
32 struct usb_attach_arg;
33 struct usb_interface;
34 struct usb_endpoint;
35 struct usb_page_cache;
36 struct usb_page_search;
37 struct usb_process;
38 struct usb_proc_msg;
39 struct usb_mbuf;
40 struct mbuf;
41
42 typedef enum {  /* keep in sync with usb_errstr_table */
43         USB_ERR_NORMAL_COMPLETION = 0,
44         USB_ERR_PENDING_REQUESTS,       /* 1 */
45         USB_ERR_NOT_STARTED,            /* 2 */
46         USB_ERR_INVAL,                  /* 3 */
47         USB_ERR_NOMEM,                  /* 4 */
48         USB_ERR_CANCELLED,              /* 5 */
49         USB_ERR_BAD_ADDRESS,            /* 6 */
50         USB_ERR_BAD_BUFSIZE,            /* 7 */
51         USB_ERR_BAD_FLAG,               /* 8 */
52         USB_ERR_NO_CALLBACK,            /* 9 */
53         USB_ERR_IN_USE,                 /* 10 */
54         USB_ERR_NO_ADDR,                /* 11 */
55         USB_ERR_NO_PIPE,                /* 12 */
56         USB_ERR_ZERO_NFRAMES,           /* 13 */
57         USB_ERR_ZERO_MAXP,              /* 14 */
58         USB_ERR_SET_ADDR_FAILED,        /* 15 */
59         USB_ERR_NO_POWER,               /* 16 */
60         USB_ERR_TOO_DEEP,               /* 17 */
61         USB_ERR_IOERROR,                /* 18 */
62         USB_ERR_NOT_CONFIGURED,         /* 19 */
63         USB_ERR_TIMEOUT,                /* 20 */
64         USB_ERR_SHORT_XFER,             /* 21 */
65         USB_ERR_STALLED,                /* 22 */
66         USB_ERR_INTERRUPTED,            /* 23 */
67         USB_ERR_DMA_LOAD_FAILED,        /* 24 */
68         USB_ERR_BAD_CONTEXT,            /* 25 */
69         USB_ERR_NO_ROOT_HUB,            /* 26 */
70         USB_ERR_NO_INTR_THREAD,         /* 27 */
71         USB_ERR_NOT_LOCKED,             /* 28 */
72         USB_ERR_MAX
73 } usb_error_t;
74
75 /*
76  * Flags for transfers
77  */
78 #define USB_FORCE_SHORT_XFER    0x0001  /* force a short transmit last */
79 #define USB_SHORT_XFER_OK       0x0004  /* allow short reads */
80 #define USB_DELAY_STATUS_STAGE  0x0010  /* insert delay before STATUS stage */
81 #define USB_USER_DATA_PTR       0x0020  /* internal flag */
82 #define USB_MULTI_SHORT_OK      0x0040  /* allow multiple short frames */
83 #define USB_MANUAL_STATUS       0x0080  /* manual ctrl status */
84
85 #define USB_NO_TIMEOUT 0
86 #define USB_DEFAULT_TIMEOUT 5000        /* 5000 ms = 5 seconds */
87
88 #if defined(_KERNEL)
89 /* typedefs */
90
91 typedef void (usb_callback_t)(struct usb_xfer *, usb_error_t);
92 typedef void (usb_proc_callback_t)(struct usb_proc_msg *);
93 typedef usb_error_t (usb_handle_req_t)(struct usb_device *,
94     struct usb_device_request *, const void **, uint16_t *);
95
96 typedef int (usb_fifo_open_t)(struct usb_fifo *fifo, int fflags);
97 typedef void (usb_fifo_close_t)(struct usb_fifo *fifo, int fflags);
98 typedef int (usb_fifo_ioctl_t)(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags);
99 typedef void (usb_fifo_cmd_t)(struct usb_fifo *fifo);
100 typedef void (usb_fifo_filter_t)(struct usb_fifo *fifo, struct usb_mbuf *m);
101
102
103 /* USB events */
104 #include <sys/eventhandler.h>
105 typedef void (*usb_dev_configured_t)(void *, struct usb_device *,
106     struct usb_attach_arg *);
107 EVENTHANDLER_DECLARE(usb_dev_configured, usb_dev_configured_t);
108
109 /*
110  * The following macros are used used to convert milliseconds into
111  * HZ. We use 1024 instead of 1000 milliseconds per second to save a
112  * full division.
113  */
114 #define USB_MS_HZ 1024
115
116 #define USB_MS_TO_TICKS(ms) \
117   (((uint32_t)((((uint32_t)(ms)) * ((uint32_t)(hz))) + USB_MS_HZ - 1)) / USB_MS_HZ)
118
119 /*
120  * Common queue structure for USB transfers.
121  */
122 struct usb_xfer_queue {
123         TAILQ_HEAD(, usb_xfer) head;
124         struct usb_xfer *curr;          /* current USB transfer processed */
125         void    (*command) (struct usb_xfer_queue *pq);
126         uint8_t recurse_1:1;
127         uint8_t recurse_2:1;
128 };
129
130 /*
131  * The following structure defines an USB endpoint
132  * USB endpoint.
133  */
134 struct usb_endpoint {
135         struct usb_xfer_queue endpoint_q;       /* queue of USB transfers */
136
137         struct usb_endpoint_descriptor *edesc;
138         struct usb_endpoint_ss_comp_descriptor *ecomp;
139         struct usb_pipe_methods *methods;       /* set by HC driver */
140
141         uint16_t isoc_next;
142
143         uint8_t toggle_next:1;          /* next data toggle value */
144         uint8_t is_stalled:1;           /* set if endpoint is stalled */
145         uint8_t is_synced:1;            /* set if we a synchronised */
146         uint8_t unused:5;
147         uint8_t iface_index;            /* not used by "default endpoint" */
148
149         uint8_t refcount_alloc;         /* allocation refcount */
150         uint8_t refcount_bw;            /* bandwidth refcount */
151 #define USB_EP_REF_MAX 0x3f
152
153         /* High-Speed resource allocation (valid if "refcount_bw" > 0) */
154
155         uint8_t usb_smask;              /* USB start mask */
156         uint8_t usb_cmask;              /* USB complete mask */
157         uint8_t usb_uframe;             /* USB microframe */
158 };
159
160 /*
161  * The following structure defines an USB interface.
162  */
163 struct usb_interface {
164         struct usb_interface_descriptor *idesc;
165         device_t subdev;
166         uint8_t alt_index;
167         uint8_t parent_iface_index;
168
169         /* Linux compat */
170         struct usb_host_interface *altsetting;
171         struct usb_host_interface *cur_altsetting;
172         struct usb_device *linux_udev;
173         void   *bsd_priv_sc;            /* device specific information */
174         char   *pnpinfo;                /* additional PnP-info for this interface */
175         uint8_t num_altsetting;         /* number of alternate settings */
176         uint8_t bsd_iface_index;
177 };
178
179 /*
180  * The following structure defines a set of USB transfer flags.
181  */
182 struct usb_xfer_flags {
183         uint8_t force_short_xfer:1;     /* force a short transmit transfer
184                                          * last */
185         uint8_t short_xfer_ok:1;        /* allow short receive transfers */
186         uint8_t short_frames_ok:1;      /* allow short frames */
187         uint8_t pipe_bof:1;             /* block pipe on failure */
188         uint8_t proxy_buffer:1;         /* makes buffer size a factor of
189                                          * "max_frame_size" */
190         uint8_t ext_buffer:1;           /* uses external DMA buffer */
191         uint8_t manual_status:1;        /* non automatic status stage on
192                                          * control transfers */
193         uint8_t no_pipe_ok:1;           /* set if "USB_ERR_NO_PIPE" error can
194                                          * be ignored */
195         uint8_t stall_pipe:1;           /* set if the endpoint belonging to
196                                          * this USB transfer should be stalled
197                                          * before starting this transfer! */
198         uint8_t pre_scale_frames:1;     /* "usb_config->frames" is
199                                          * assumed to give the
200                                          * buffering time in
201                                          * milliseconds and is
202                                          * converted into the nearest
203                                          * number of frames when the
204                                          * USB transfer is setup. This
205                                          * option only has effect for
206                                          * ISOCHRONOUS transfers.
207                                          */
208 };
209
210 /*
211  * The following structure define an USB configuration, that basically
212  * is used when setting up an USB transfer.
213  */
214 struct usb_config {
215         usb_callback_t *callback;       /* USB transfer callback */
216         usb_frlength_t bufsize; /* total pipe buffer size in bytes */
217         usb_frcount_t frames;           /* maximum number of USB frames */
218         usb_timeout_t interval; /* interval in milliseconds */
219 #define USB_DEFAULT_INTERVAL    0
220         usb_timeout_t timeout;          /* transfer timeout in milliseconds */
221         struct usb_xfer_flags flags;    /* transfer flags */
222         enum usb_hc_mode usb_mode;      /* host or device mode */
223         uint8_t type;                   /* pipe type */
224         uint8_t endpoint;               /* pipe number */
225         uint8_t direction;              /* pipe direction */
226         uint8_t ep_index;               /* pipe index match to use */
227         uint8_t if_index;               /* "ifaces" index to use */
228 };
229
230 /*
231  * The following structure is used when looking up an USB driver for
232  * an USB device. It is inspired by the Linux structure called
233  * "usb_device_id".
234  */
235 struct usb_device_id {
236
237         /* Hook for driver specific information */
238         unsigned long driver_info;
239
240         /* Used for product specific matches; the BCD range is inclusive */
241         uint16_t idVendor;
242         uint16_t idProduct;
243         uint16_t bcdDevice_lo;
244         uint16_t bcdDevice_hi;
245
246         /* Used for device class matches */
247         uint8_t bDeviceClass;
248         uint8_t bDeviceSubClass;
249         uint8_t bDeviceProtocol;
250
251         /* Used for interface class matches */
252         uint8_t bInterfaceClass;
253         uint8_t bInterfaceSubClass;
254         uint8_t bInterfaceProtocol;
255
256         /* Select which fields to match against */
257         uint8_t match_flag_vendor:1;
258         uint8_t match_flag_product:1;
259         uint8_t match_flag_dev_lo:1;
260         uint8_t match_flag_dev_hi:1;
261         uint8_t match_flag_dev_class:1;
262         uint8_t match_flag_dev_subclass:1;
263         uint8_t match_flag_dev_protocol:1;
264         uint8_t match_flag_int_class:1;
265         uint8_t match_flag_int_subclass:1;
266         uint8_t match_flag_int_protocol:1;
267
268 #if USB_HAVE_COMPAT_LINUX
269         /* which fields to match against */
270         uint16_t match_flags;
271 #define USB_DEVICE_ID_MATCH_VENDOR              0x0001
272 #define USB_DEVICE_ID_MATCH_PRODUCT             0x0002
273 #define USB_DEVICE_ID_MATCH_DEV_LO              0x0004
274 #define USB_DEVICE_ID_MATCH_DEV_HI              0x0008
275 #define USB_DEVICE_ID_MATCH_DEV_CLASS           0x0010
276 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS        0x0020
277 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL        0x0040
278 #define USB_DEVICE_ID_MATCH_INT_CLASS           0x0080
279 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS        0x0100
280 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL        0x0200
281 #endif
282 };
283
284 #define USB_VENDOR(vend)                        \
285   .match_flag_vendor = 1, .idVendor = (vend)
286
287 #define USB_PRODUCT(prod)                       \
288   .match_flag_product = 1, .idProduct = (prod)
289
290 #define USB_VP(vend,prod)                       \
291   USB_VENDOR(vend), USB_PRODUCT(prod)
292
293 #define USB_VPI(vend,prod,info)                 \
294   USB_VENDOR(vend), USB_PRODUCT(prod), USB_DRIVER_INFO(info)
295
296 #define USB_DEV_BCD_GTEQ(lo)    /* greater than or equal */ \
297   .match_flag_dev_lo = 1, .bcdDevice_lo = (lo)
298
299 #define USB_DEV_BCD_LTEQ(hi)    /* less than or equal */ \
300   .match_flag_dev_hi = 1, .bcdDevice_hi = (hi)
301
302 #define USB_DEV_CLASS(dc)                       \
303   .match_flag_dev_class = 1, .bDeviceClass = (dc)
304
305 #define USB_DEV_SUBCLASS(dsc)                   \
306   .match_flag_dev_subclass = 1, .bDeviceSubClass = (dsc)
307
308 #define USB_DEV_PROTOCOL(dp)                    \
309   .match_flag_dev_protocol = 1, .bDeviceProtocol = (dp)
310
311 #define USB_IFACE_CLASS(ic)                     \
312   .match_flag_int_class = 1, .bInterfaceClass = (ic)
313
314 #define USB_IFACE_SUBCLASS(isc)                 \
315   .match_flag_int_subclass = 1, .bInterfaceSubClass = (isc)
316
317 #define USB_IFACE_PROTOCOL(ip)                  \
318   .match_flag_int_protocol = 1, .bInterfaceProtocol = (ip)
319
320 #define USB_IF_CSI(class,subclass,info)                 \
321   USB_IFACE_CLASS(class), USB_IFACE_SUBCLASS(subclass), USB_DRIVER_INFO(info)
322
323 #define USB_DRIVER_INFO(n)                      \
324   .driver_info = (n)
325
326 #define USB_GET_DRIVER_INFO(did)                \
327   (did)->driver_info
328
329 /*
330  * The following structure keeps information that is used to match
331  * against an array of "usb_device_id" elements.
332  */
333 struct usbd_lookup_info {
334         uint16_t idVendor;
335         uint16_t idProduct;
336         uint16_t bcdDevice;
337         uint8_t bDeviceClass;
338         uint8_t bDeviceSubClass;
339         uint8_t bDeviceProtocol;
340         uint8_t bInterfaceClass;
341         uint8_t bInterfaceSubClass;
342         uint8_t bInterfaceProtocol;
343         uint8_t bIfaceIndex;
344         uint8_t bIfaceNum;
345         uint8_t bConfigIndex;
346         uint8_t bConfigNum;
347 };
348
349 /* Structure used by probe and attach */
350
351 struct usb_attach_arg {
352         struct usbd_lookup_info info;
353         device_t temp_dev;              /* for internal use */
354         unsigned long driver_info;      /* for internal use */
355         void *driver_ivar;
356         struct usb_device *device;      /* current device */
357         struct usb_interface *iface;    /* current interface */
358         enum usb_hc_mode usb_mode;      /* host or device mode */
359         uint8_t port;
360         uint8_t dev_state;
361 #define UAA_DEV_READY           0
362 #define UAA_DEV_DISABLED        1
363 #define UAA_DEV_EJECTING        2
364 };
365
366 /*
367  * The following is a wrapper for the callout structure to ease
368  * porting the code to other platforms.
369  */
370 struct usb_callout {
371         struct callout co;
372 };
373 #define usb_callout_init_mtx(c,m,f) callout_init_mtx(&(c)->co,m,f)
374 #define usb_callout_reset(c,t,f,d) callout_reset(&(c)->co,t,f,d)
375 #define usb_callout_stop(c) callout_stop(&(c)->co)
376 #define usb_callout_drain(c) callout_drain(&(c)->co)
377 #define usb_callout_pending(c) callout_pending(&(c)->co)
378
379 /* USB transfer states */
380
381 #define USB_ST_SETUP       0
382 #define USB_ST_TRANSFERRED 1
383 #define USB_ST_ERROR       2
384
385 /* USB handle request states */
386 #define USB_HR_NOT_COMPLETE     0
387 #define USB_HR_COMPLETE_OK      1
388 #define USB_HR_COMPLETE_ERR     2
389
390 /*
391  * The following macro will return the current state of an USB
392  * transfer like defined by the "USB_ST_XXX" enums.
393  */
394 #define USB_GET_STATE(xfer) (usbd_xfer_state(xfer))
395
396 /*
397  * The following structure defines the USB process message header.
398  */
399 struct usb_proc_msg {
400         TAILQ_ENTRY(usb_proc_msg) pm_qentry;
401         usb_proc_callback_t *pm_callback;
402         usb_size_t pm_num;
403 };
404
405 #define USB_FIFO_TX 0
406 #define USB_FIFO_RX 1
407
408 /*
409  * Locking note for the following functions.  All the
410  * "usb_fifo_cmd_t" and "usb_fifo_filter_t" functions are called
411  * locked. The others are called unlocked.
412  */
413 struct usb_fifo_methods {
414         usb_fifo_open_t *f_open;
415         usb_fifo_close_t *f_close;
416         usb_fifo_ioctl_t *f_ioctl;
417         /*
418          * NOTE: The post-ioctl callback is called after the USB reference
419          * gets locked in the IOCTL handler:
420          */
421         usb_fifo_ioctl_t *f_ioctl_post;
422         usb_fifo_cmd_t *f_start_read;
423         usb_fifo_cmd_t *f_stop_read;
424         usb_fifo_cmd_t *f_start_write;
425         usb_fifo_cmd_t *f_stop_write;
426         usb_fifo_filter_t *f_filter_read;
427         usb_fifo_filter_t *f_filter_write;
428         const char *basename[4];
429         const char *postfix[4];
430 };
431
432 struct usb_fifo_sc {
433         struct usb_fifo *fp[2];
434         struct cdev* dev;
435 };
436
437 const char *usbd_errstr(usb_error_t error);
438 void    *usbd_find_descriptor(struct usb_device *udev, void *id,
439             uint8_t iface_index, uint8_t type, uint8_t type_mask,
440             uint8_t subtype, uint8_t subtype_mask);
441 struct usb_config_descriptor *usbd_get_config_descriptor(
442             struct usb_device *udev);
443 struct usb_device_descriptor *usbd_get_device_descriptor(
444             struct usb_device *udev);
445 struct usb_interface *usbd_get_iface(struct usb_device *udev,
446             uint8_t iface_index);
447 struct usb_interface_descriptor *usbd_get_interface_descriptor(
448             struct usb_interface *iface);
449 struct usb_endpoint *usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index,
450                     const struct usb_config *setup);
451 struct usb_endpoint *usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val);
452 usb_error_t     usbd_interface_count(struct usb_device *udev, uint8_t *count);
453 enum usb_hc_mode usbd_get_mode(struct usb_device *udev);
454 enum usb_dev_speed usbd_get_speed(struct usb_device *udev);
455 void    device_set_usb_desc(device_t dev);
456 void    usb_pause_mtx(struct mtx *mtx, int _ticks);
457 usb_error_t     usbd_set_pnpinfo(struct usb_device *udev,
458                         uint8_t iface_index, const char *pnpinfo);
459
460 const struct usb_device_id *usbd_lookup_id_by_info(
461             const struct usb_device_id *id, usb_size_t sizeof_id,
462             const struct usbd_lookup_info *info);
463 int     usbd_lookup_id_by_uaa(const struct usb_device_id *id,
464             usb_size_t sizeof_id, struct usb_attach_arg *uaa);
465
466 usb_error_t usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx,
467                     struct usb_device_request *req, void *data, uint16_t flags,
468                     uint16_t *actlen, usb_timeout_t timeout);
469 #define usbd_do_request(u,m,r,d) \
470   usbd_do_request_flags(u,m,r,d,0,NULL,USB_DEFAULT_TIMEOUT)
471
472 uint8_t usbd_clear_stall_callback(struct usb_xfer *xfer1,
473             struct usb_xfer *xfer2);
474 uint8_t usbd_get_interface_altindex(struct usb_interface *iface);
475 usb_error_t usbd_set_alt_interface_index(struct usb_device *udev,
476             uint8_t iface_index, uint8_t alt_index);
477 uint32_t usbd_get_isoc_fps(struct usb_device *udev);
478 usb_error_t usbd_transfer_setup(struct usb_device *udev,
479             const uint8_t *ifaces, struct usb_xfer **pxfer,
480             const struct usb_config *setup_start, uint16_t n_setup,
481             void *priv_sc, struct mtx *priv_mtx);
482 void    usbd_transfer_submit(struct usb_xfer *xfer);
483 void    usbd_transfer_clear_stall(struct usb_xfer *xfer);
484 void    usbd_transfer_drain(struct usb_xfer *xfer);
485 uint8_t usbd_transfer_pending(struct usb_xfer *xfer);
486 void    usbd_transfer_start(struct usb_xfer *xfer);
487 void    usbd_transfer_stop(struct usb_xfer *xfer);
488 void    usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup);
489 void    usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max);
490 void    usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index,
491             uint8_t parent_index);
492 uint8_t usbd_get_bus_index(struct usb_device *udev);
493 uint8_t usbd_get_device_index(struct usb_device *udev);
494 void    usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode);
495 uint8_t usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode);
496 uint8_t usbd_device_attached(struct usb_device *udev);
497
498 usb_frlength_t
499         usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex);
500 void    usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen,
501             int *aframes, int *nframes);
502 struct usb_page_cache *usbd_xfer_get_frame(struct usb_xfer *xfer,
503             usb_frcount_t frindex);
504 void    *usbd_xfer_softc(struct usb_xfer *xfer);
505 void    *usbd_xfer_get_priv(struct usb_xfer *xfer);
506 void    usbd_xfer_set_priv(struct usb_xfer *xfer, void *);
507 void    usbd_xfer_set_interval(struct usb_xfer *xfer, int);
508 uint8_t usbd_xfer_state(struct usb_xfer *xfer);
509 void    usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
510             void *ptr, usb_frlength_t len);
511 void    usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
512             void **ptr, int *len);
513 void    usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset,
514             usb_frcount_t frindex);
515 usb_frlength_t usbd_xfer_max_len(struct usb_xfer *xfer);
516 usb_frlength_t usbd_xfer_max_framelen(struct usb_xfer *xfer);
517 usb_frcount_t usbd_xfer_max_frames(struct usb_xfer *xfer);
518 uint8_t usbd_xfer_get_fps_shift(struct usb_xfer *xfer);
519 usb_frlength_t usbd_xfer_frame_len(struct usb_xfer *xfer,
520             usb_frcount_t frindex);
521 void    usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex,
522             usb_frlength_t len);
523 void    usbd_xfer_set_timeout(struct usb_xfer *xfer, int timeout);
524 void    usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n);
525 void    usbd_xfer_set_stall(struct usb_xfer *xfer);
526 int     usbd_xfer_is_stalled(struct usb_xfer *xfer);
527 void    usbd_xfer_set_flag(struct usb_xfer *xfer, int flag);
528 void    usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag);
529 uint16_t usbd_xfer_get_timestamp(struct usb_xfer *xfer);
530
531 void    usbd_copy_in(struct usb_page_cache *cache, usb_frlength_t offset,
532             const void *ptr, usb_frlength_t len);
533 int     usbd_copy_in_user(struct usb_page_cache *cache, usb_frlength_t offset,
534             const void *ptr, usb_frlength_t len);
535 void    usbd_copy_out(struct usb_page_cache *cache, usb_frlength_t offset,
536             void *ptr, usb_frlength_t len);
537 int     usbd_copy_out_user(struct usb_page_cache *cache, usb_frlength_t offset,
538             void *ptr, usb_frlength_t len);
539 void    usbd_get_page(struct usb_page_cache *pc, usb_frlength_t offset,
540             struct usb_page_search *res);
541 void    usbd_m_copy_in(struct usb_page_cache *cache, usb_frlength_t dst_offset,
542             struct mbuf *m, usb_size_t src_offset, usb_frlength_t src_len);
543 void    usbd_frame_zero(struct usb_page_cache *cache, usb_frlength_t offset,
544             usb_frlength_t len);
545 void    usbd_start_re_enumerate(struct usb_device *udev);
546
547 int     usb_fifo_attach(struct usb_device *udev, void *priv_sc,
548             struct mtx *priv_mtx, struct usb_fifo_methods *pm,
549             struct usb_fifo_sc *f_sc, uint16_t unit, uint16_t subunit,
550             uint8_t iface_index, uid_t uid, gid_t gid, int mode);
551 void    usb_fifo_detach(struct usb_fifo_sc *f_sc);
552 int     usb_fifo_alloc_buffer(struct usb_fifo *f, uint32_t bufsize,
553             uint16_t nbuf);
554 void    usb_fifo_free_buffer(struct usb_fifo *f);
555 uint32_t usb_fifo_put_bytes_max(struct usb_fifo *fifo);
556 void    usb_fifo_put_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
557             usb_frlength_t offset, usb_frlength_t len, uint8_t what);
558 void    usb_fifo_put_data_linear(struct usb_fifo *fifo, void *ptr,
559             usb_size_t len, uint8_t what);
560 uint8_t usb_fifo_put_data_buffer(struct usb_fifo *f, void *ptr, usb_size_t len);
561 void    usb_fifo_put_data_error(struct usb_fifo *fifo);
562 uint8_t usb_fifo_get_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
563             usb_frlength_t offset, usb_frlength_t len, usb_frlength_t *actlen,
564             uint8_t what);
565 uint8_t usb_fifo_get_data_linear(struct usb_fifo *fifo, void *ptr,
566             usb_size_t len, usb_size_t *actlen, uint8_t what);
567 uint8_t usb_fifo_get_data_buffer(struct usb_fifo *f, void **pptr,
568             usb_size_t *plen);
569 void    usb_fifo_reset(struct usb_fifo *f);
570 void    usb_fifo_wakeup(struct usb_fifo *f);
571 void    usb_fifo_get_data_error(struct usb_fifo *fifo);
572 void    *usb_fifo_softc(struct usb_fifo *fifo);
573 void    usb_fifo_set_close_zlp(struct usb_fifo *, uint8_t);
574 void    usb_fifo_set_write_defrag(struct usb_fifo *, uint8_t);
575 void    usb_fifo_free(struct usb_fifo *f);
576 #endif /* _KERNEL */
577 #endif /* _USB_USBDI_H_ */