]> CyberLeo.Net >> Repos - FreeBSD/stable/8.git/blob - sys/dev/usb/usbdi.h
MFC r223486, r223489, r223490, r223511, r223512, r223513,
[FreeBSD/stable/8.git] / sys / dev / usb / usbdi.h
1 /*-
2  * Copyright (c) 2009 Andrew Thompson
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  *
24  * $FreeBSD$
25  */
26 #ifndef _USB_USBDI_H_
27 #define _USB_USBDI_H_
28
29 struct usb_fifo;
30 struct usb_xfer;
31 struct usb_device;
32 struct usb_attach_arg;
33 struct usb_interface;
34 struct usb_endpoint;
35 struct usb_page_cache;
36 struct usb_page_search;
37 struct usb_process;
38 struct usb_proc_msg;
39 struct usb_mbuf;
40 struct mbuf;
41
42 typedef enum {  /* keep in sync with usb_errstr_table */
43         USB_ERR_NORMAL_COMPLETION = 0,
44         USB_ERR_PENDING_REQUESTS,       /* 1 */
45         USB_ERR_NOT_STARTED,            /* 2 */
46         USB_ERR_INVAL,                  /* 3 */
47         USB_ERR_NOMEM,                  /* 4 */
48         USB_ERR_CANCELLED,              /* 5 */
49         USB_ERR_BAD_ADDRESS,            /* 6 */
50         USB_ERR_BAD_BUFSIZE,            /* 7 */
51         USB_ERR_BAD_FLAG,               /* 8 */
52         USB_ERR_NO_CALLBACK,            /* 9 */
53         USB_ERR_IN_USE,                 /* 10 */
54         USB_ERR_NO_ADDR,                /* 11 */
55         USB_ERR_NO_PIPE,                /* 12 */
56         USB_ERR_ZERO_NFRAMES,           /* 13 */
57         USB_ERR_ZERO_MAXP,              /* 14 */
58         USB_ERR_SET_ADDR_FAILED,        /* 15 */
59         USB_ERR_NO_POWER,               /* 16 */
60         USB_ERR_TOO_DEEP,               /* 17 */
61         USB_ERR_IOERROR,                /* 18 */
62         USB_ERR_NOT_CONFIGURED,         /* 19 */
63         USB_ERR_TIMEOUT,                /* 20 */
64         USB_ERR_SHORT_XFER,             /* 21 */
65         USB_ERR_STALLED,                /* 22 */
66         USB_ERR_INTERRUPTED,            /* 23 */
67         USB_ERR_DMA_LOAD_FAILED,        /* 24 */
68         USB_ERR_BAD_CONTEXT,            /* 25 */
69         USB_ERR_NO_ROOT_HUB,            /* 26 */
70         USB_ERR_NO_INTR_THREAD,         /* 27 */
71         USB_ERR_NOT_LOCKED,             /* 28 */
72         USB_ERR_MAX
73 } usb_error_t;
74
75 /*
76  * Flags for transfers
77  */
78 #define USB_FORCE_SHORT_XFER    0x0001  /* force a short transmit last */
79 #define USB_SHORT_XFER_OK       0x0004  /* allow short reads */
80 #define USB_DELAY_STATUS_STAGE  0x0010  /* insert delay before STATUS stage */
81 #define USB_USER_DATA_PTR       0x0020  /* internal flag */
82 #define USB_MULTI_SHORT_OK      0x0040  /* allow multiple short frames */
83 #define USB_MANUAL_STATUS       0x0080  /* manual ctrl status */
84
85 #define USB_NO_TIMEOUT 0
86 #define USB_DEFAULT_TIMEOUT 5000        /* 5000 ms = 5 seconds */
87
88 #if defined(_KERNEL)
89 /* typedefs */
90
91 typedef void (usb_callback_t)(struct usb_xfer *, usb_error_t);
92 typedef void (usb_proc_callback_t)(struct usb_proc_msg *);
93 typedef usb_error_t (usb_handle_req_t)(struct usb_device *,
94     struct usb_device_request *, const void **, uint16_t *);
95
96 typedef int (usb_fifo_open_t)(struct usb_fifo *fifo, int fflags);
97 typedef void (usb_fifo_close_t)(struct usb_fifo *fifo, int fflags);
98 typedef int (usb_fifo_ioctl_t)(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags);
99 typedef void (usb_fifo_cmd_t)(struct usb_fifo *fifo);
100 typedef void (usb_fifo_filter_t)(struct usb_fifo *fifo, struct usb_mbuf *m);
101
102
103 /* USB events */
104 #include <sys/eventhandler.h>
105 typedef void (*usb_dev_configured_t)(void *, struct usb_device *,
106     struct usb_attach_arg *);
107 EVENTHANDLER_DECLARE(usb_dev_configured, usb_dev_configured_t);
108
109 /*
110  * The following macros are used used to convert milliseconds into
111  * HZ. We use 1024 instead of 1000 milliseconds per second to save a
112  * full division.
113  */
114 #define USB_MS_HZ 1024
115
116 #define USB_MS_TO_TICKS(ms) \
117   (((uint32_t)((((uint32_t)(ms)) * ((uint32_t)(hz))) + USB_MS_HZ - 1)) / USB_MS_HZ)
118
119 /*
120  * Common queue structure for USB transfers.
121  */
122 struct usb_xfer_queue {
123         TAILQ_HEAD(, usb_xfer) head;
124         struct usb_xfer *curr;          /* current USB transfer processed */
125         void    (*command) (struct usb_xfer_queue *pq);
126         uint8_t recurse_1:1;
127         uint8_t recurse_2:1;
128 };
129
130 /*
131  * The following structure defines an USB endpoint
132  * USB endpoint.
133  */
134 struct usb_endpoint {
135         struct usb_xfer_queue endpoint_q;       /* queue of USB transfers */
136
137         struct usb_endpoint_descriptor *edesc;
138         struct usb_endpoint_ss_comp_descriptor *ecomp;
139         struct usb_pipe_methods *methods;       /* set by HC driver */
140
141         uint16_t isoc_next;
142
143         uint8_t toggle_next:1;          /* next data toggle value */
144         uint8_t is_stalled:1;           /* set if endpoint is stalled */
145         uint8_t is_synced:1;            /* set if we a synchronised */
146         uint8_t unused:5;
147         uint8_t iface_index;            /* not used by "default endpoint" */
148
149         uint8_t refcount_alloc;         /* allocation refcount */
150         uint8_t refcount_bw;            /* bandwidth refcount */
151 #define USB_EP_REF_MAX 0x3f
152
153         /* High-Speed resource allocation (valid if "refcount_bw" > 0) */
154
155         uint8_t usb_smask;              /* USB start mask */
156         uint8_t usb_cmask;              /* USB complete mask */
157         uint8_t usb_uframe;             /* USB microframe */
158 };
159
160 /*
161  * The following structure defines an USB interface.
162  */
163 struct usb_interface {
164         struct usb_interface_descriptor *idesc;
165         device_t subdev;
166         uint8_t alt_index;
167         uint8_t parent_iface_index;
168
169         /* Linux compat */
170         struct usb_host_interface *altsetting;
171         struct usb_host_interface *cur_altsetting;
172         struct usb_device *linux_udev;
173         void   *bsd_priv_sc;            /* device specific information */
174         char   *pnpinfo;                /* additional PnP-info for this interface */
175         uint8_t num_altsetting;         /* number of alternate settings */
176         uint8_t bsd_iface_index;
177 };
178
179 /*
180  * The following structure defines a set of USB transfer flags.
181  */
182 struct usb_xfer_flags {
183         uint8_t force_short_xfer:1;     /* force a short transmit transfer
184                                          * last */
185         uint8_t short_xfer_ok:1;        /* allow short receive transfers */
186         uint8_t short_frames_ok:1;      /* allow short frames */
187         uint8_t pipe_bof:1;             /* block pipe on failure */
188         uint8_t proxy_buffer:1;         /* makes buffer size a factor of
189                                          * "max_frame_size" */
190         uint8_t ext_buffer:1;           /* uses external DMA buffer */
191         uint8_t manual_status:1;        /* non automatic status stage on
192                                          * control transfers */
193         uint8_t no_pipe_ok:1;           /* set if "USB_ERR_NO_PIPE" error can
194                                          * be ignored */
195         uint8_t stall_pipe:1;           /* set if the endpoint belonging to
196                                          * this USB transfer should be stalled
197                                          * before starting this transfer! */
198         uint8_t pre_scale_frames:1;     /* "usb_config->frames" is
199                                          * assumed to give the
200                                          * buffering time in
201                                          * milliseconds and is
202                                          * converted into the nearest
203                                          * number of frames when the
204                                          * USB transfer is setup. This
205                                          * option only has effect for
206                                          * ISOCHRONOUS transfers.
207                                          */
208 };
209
210 /*
211  * The following structure define an USB configuration, that basically
212  * is used when setting up an USB transfer.
213  */
214 struct usb_config {
215         usb_callback_t *callback;       /* USB transfer callback */
216         usb_frlength_t bufsize; /* total pipe buffer size in bytes */
217         usb_frcount_t frames;           /* maximum number of USB frames */
218         usb_timeout_t interval; /* interval in milliseconds */
219 #define USB_DEFAULT_INTERVAL    0
220         usb_timeout_t timeout;          /* transfer timeout in milliseconds */
221         struct usb_xfer_flags flags;    /* transfer flags */
222         enum usb_hc_mode usb_mode;      /* host or device mode */
223         uint8_t type;                   /* pipe type */
224         uint8_t endpoint;               /* pipe number */
225         uint8_t direction;              /* pipe direction */
226         uint8_t ep_index;               /* pipe index match to use */
227         uint8_t if_index;               /* "ifaces" index to use */
228 };
229
230 /*
231  * Use these macro when defining USB device ID arrays if you want to
232  * have your driver module automatically loaded in host, device or
233  * both modes respectivly:
234  */
235 #define STRUCT_USB_HOST_ID \
236     struct usb_device_id __section("usb_host_id")
237 #define STRUCT_USB_DEVICE_ID \
238     struct usb_device_id __section("usb_device_id")
239 #define STRUCT_USB_DUAL_ID \
240     struct usb_device_id __section("usb_dual_id")
241
242 /*
243  * The following structure is used when looking up an USB driver for
244  * an USB device. It is inspired by the Linux structure called
245  * "usb_device_id".
246  */
247 struct usb_device_id {
248
249         /* Hook for driver specific information */
250         unsigned long driver_info;
251
252         /* Used for product specific matches; the BCD range is inclusive */
253         uint16_t idVendor;
254         uint16_t idProduct;
255         uint16_t bcdDevice_lo;
256         uint16_t bcdDevice_hi;
257
258         /* Used for device class matches */
259         uint8_t bDeviceClass;
260         uint8_t bDeviceSubClass;
261         uint8_t bDeviceProtocol;
262
263         /* Used for interface class matches */
264         uint8_t bInterfaceClass;
265         uint8_t bInterfaceSubClass;
266         uint8_t bInterfaceProtocol;
267
268         /* Select which fields to match against */
269         uint8_t match_flag_vendor:1;
270         uint8_t match_flag_product:1;
271         uint8_t match_flag_dev_lo:1;
272         uint8_t match_flag_dev_hi:1;
273
274         uint8_t match_flag_dev_class:1;
275         uint8_t match_flag_dev_subclass:1;
276         uint8_t match_flag_dev_protocol:1;
277         uint8_t match_flag_int_class:1;
278
279         uint8_t match_flag_int_subclass:1;
280         uint8_t match_flag_int_protocol:1;
281         uint8_t match_flag_unused:6;
282
283 #if USB_HAVE_COMPAT_LINUX
284         /* which fields to match against */
285         uint16_t match_flags;
286 #define USB_DEVICE_ID_MATCH_VENDOR              0x0001
287 #define USB_DEVICE_ID_MATCH_PRODUCT             0x0002
288 #define USB_DEVICE_ID_MATCH_DEV_LO              0x0004
289 #define USB_DEVICE_ID_MATCH_DEV_HI              0x0008
290 #define USB_DEVICE_ID_MATCH_DEV_CLASS           0x0010
291 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS        0x0020
292 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL        0x0040
293 #define USB_DEVICE_ID_MATCH_INT_CLASS           0x0080
294 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS        0x0100
295 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL        0x0200
296 #endif
297 } __aligned(32);
298
299 /* check that the size of the structure above is correct */
300 extern char usb_device_id_assert[(sizeof(struct usb_device_id) == 32) ? 1 : -1];
301
302 #define USB_VENDOR(vend)                        \
303   .match_flag_vendor = 1, .idVendor = (vend)
304
305 #define USB_PRODUCT(prod)                       \
306   .match_flag_product = 1, .idProduct = (prod)
307
308 #define USB_VP(vend,prod)                       \
309   USB_VENDOR(vend), USB_PRODUCT(prod)
310
311 #define USB_VPI(vend,prod,info)                 \
312   USB_VENDOR(vend), USB_PRODUCT(prod), USB_DRIVER_INFO(info)
313
314 #define USB_DEV_BCD_GTEQ(lo)    /* greater than or equal */ \
315   .match_flag_dev_lo = 1, .bcdDevice_lo = (lo)
316
317 #define USB_DEV_BCD_LTEQ(hi)    /* less than or equal */ \
318   .match_flag_dev_hi = 1, .bcdDevice_hi = (hi)
319
320 #define USB_DEV_CLASS(dc)                       \
321   .match_flag_dev_class = 1, .bDeviceClass = (dc)
322
323 #define USB_DEV_SUBCLASS(dsc)                   \
324   .match_flag_dev_subclass = 1, .bDeviceSubClass = (dsc)
325
326 #define USB_DEV_PROTOCOL(dp)                    \
327   .match_flag_dev_protocol = 1, .bDeviceProtocol = (dp)
328
329 #define USB_IFACE_CLASS(ic)                     \
330   .match_flag_int_class = 1, .bInterfaceClass = (ic)
331
332 #define USB_IFACE_SUBCLASS(isc)                 \
333   .match_flag_int_subclass = 1, .bInterfaceSubClass = (isc)
334
335 #define USB_IFACE_PROTOCOL(ip)                  \
336   .match_flag_int_protocol = 1, .bInterfaceProtocol = (ip)
337
338 #define USB_IF_CSI(class,subclass,info)                 \
339   USB_IFACE_CLASS(class), USB_IFACE_SUBCLASS(subclass), USB_DRIVER_INFO(info)
340
341 #define USB_DRIVER_INFO(n)                      \
342   .driver_info = (n)
343
344 #define USB_GET_DRIVER_INFO(did)                \
345   (did)->driver_info
346
347 /*
348  * The following structure keeps information that is used to match
349  * against an array of "usb_device_id" elements.
350  */
351 struct usbd_lookup_info {
352         uint16_t idVendor;
353         uint16_t idProduct;
354         uint16_t bcdDevice;
355         uint8_t bDeviceClass;
356         uint8_t bDeviceSubClass;
357         uint8_t bDeviceProtocol;
358         uint8_t bInterfaceClass;
359         uint8_t bInterfaceSubClass;
360         uint8_t bInterfaceProtocol;
361         uint8_t bIfaceIndex;
362         uint8_t bIfaceNum;
363         uint8_t bConfigIndex;
364         uint8_t bConfigNum;
365 };
366
367 /* Structure used by probe and attach */
368
369 struct usb_attach_arg {
370         struct usbd_lookup_info info;
371         device_t temp_dev;              /* for internal use */
372         unsigned long driver_info;      /* for internal use */
373         void *driver_ivar;
374         struct usb_device *device;      /* current device */
375         struct usb_interface *iface;    /* current interface */
376         enum usb_hc_mode usb_mode;      /* host or device mode */
377         uint8_t port;
378         uint8_t dev_state;
379 #define UAA_DEV_READY           0
380 #define UAA_DEV_DISABLED        1
381 #define UAA_DEV_EJECTING        2
382 };
383
384 /*
385  * The following is a wrapper for the callout structure to ease
386  * porting the code to other platforms.
387  */
388 struct usb_callout {
389         struct callout co;
390 };
391 #define usb_callout_init_mtx(c,m,f) callout_init_mtx(&(c)->co,m,f)
392 #define usb_callout_reset(c,t,f,d) callout_reset(&(c)->co,t,f,d)
393 #define usb_callout_stop(c) callout_stop(&(c)->co)
394 #define usb_callout_drain(c) callout_drain(&(c)->co)
395 #define usb_callout_pending(c) callout_pending(&(c)->co)
396
397 /* USB transfer states */
398
399 #define USB_ST_SETUP       0
400 #define USB_ST_TRANSFERRED 1
401 #define USB_ST_ERROR       2
402
403 /* USB handle request states */
404 #define USB_HR_NOT_COMPLETE     0
405 #define USB_HR_COMPLETE_OK      1
406 #define USB_HR_COMPLETE_ERR     2
407
408 /*
409  * The following macro will return the current state of an USB
410  * transfer like defined by the "USB_ST_XXX" enums.
411  */
412 #define USB_GET_STATE(xfer) (usbd_xfer_state(xfer))
413
414 /*
415  * The following structure defines the USB process message header.
416  */
417 struct usb_proc_msg {
418         TAILQ_ENTRY(usb_proc_msg) pm_qentry;
419         usb_proc_callback_t *pm_callback;
420         usb_size_t pm_num;
421 };
422
423 #define USB_FIFO_TX 0
424 #define USB_FIFO_RX 1
425
426 /*
427  * Locking note for the following functions.  All the
428  * "usb_fifo_cmd_t" and "usb_fifo_filter_t" functions are called
429  * locked. The others are called unlocked.
430  */
431 struct usb_fifo_methods {
432         usb_fifo_open_t *f_open;
433         usb_fifo_close_t *f_close;
434         usb_fifo_ioctl_t *f_ioctl;
435         /*
436          * NOTE: The post-ioctl callback is called after the USB reference
437          * gets locked in the IOCTL handler:
438          */
439         usb_fifo_ioctl_t *f_ioctl_post;
440         usb_fifo_cmd_t *f_start_read;
441         usb_fifo_cmd_t *f_stop_read;
442         usb_fifo_cmd_t *f_start_write;
443         usb_fifo_cmd_t *f_stop_write;
444         usb_fifo_filter_t *f_filter_read;
445         usb_fifo_filter_t *f_filter_write;
446         const char *basename[4];
447         const char *postfix[4];
448 };
449
450 struct usb_fifo_sc {
451         struct usb_fifo *fp[2];
452         struct cdev* dev;
453 };
454
455 const char *usbd_errstr(usb_error_t error);
456 void    *usbd_find_descriptor(struct usb_device *udev, void *id,
457             uint8_t iface_index, uint8_t type, uint8_t type_mask,
458             uint8_t subtype, uint8_t subtype_mask);
459 struct usb_config_descriptor *usbd_get_config_descriptor(
460             struct usb_device *udev);
461 struct usb_device_descriptor *usbd_get_device_descriptor(
462             struct usb_device *udev);
463 struct usb_interface *usbd_get_iface(struct usb_device *udev,
464             uint8_t iface_index);
465 struct usb_interface_descriptor *usbd_get_interface_descriptor(
466             struct usb_interface *iface);
467 struct usb_endpoint *usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index,
468                     const struct usb_config *setup);
469 struct usb_endpoint *usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val);
470 usb_error_t     usbd_interface_count(struct usb_device *udev, uint8_t *count);
471 enum usb_hc_mode usbd_get_mode(struct usb_device *udev);
472 enum usb_dev_speed usbd_get_speed(struct usb_device *udev);
473 void    device_set_usb_desc(device_t dev);
474 void    usb_pause_mtx(struct mtx *mtx, int _ticks);
475 usb_error_t     usbd_set_pnpinfo(struct usb_device *udev,
476                         uint8_t iface_index, const char *pnpinfo);
477
478 const struct usb_device_id *usbd_lookup_id_by_info(
479             const struct usb_device_id *id, usb_size_t sizeof_id,
480             const struct usbd_lookup_info *info);
481 int     usbd_lookup_id_by_uaa(const struct usb_device_id *id,
482             usb_size_t sizeof_id, struct usb_attach_arg *uaa);
483
484 usb_error_t usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx,
485                     struct usb_device_request *req, void *data, uint16_t flags,
486                     uint16_t *actlen, usb_timeout_t timeout);
487 #define usbd_do_request(u,m,r,d) \
488   usbd_do_request_flags(u,m,r,d,0,NULL,USB_DEFAULT_TIMEOUT)
489
490 uint8_t usbd_clear_stall_callback(struct usb_xfer *xfer1,
491             struct usb_xfer *xfer2);
492 uint8_t usbd_get_interface_altindex(struct usb_interface *iface);
493 usb_error_t usbd_set_alt_interface_index(struct usb_device *udev,
494             uint8_t iface_index, uint8_t alt_index);
495 uint32_t usbd_get_isoc_fps(struct usb_device *udev);
496 usb_error_t usbd_transfer_setup(struct usb_device *udev,
497             const uint8_t *ifaces, struct usb_xfer **pxfer,
498             const struct usb_config *setup_start, uint16_t n_setup,
499             void *priv_sc, struct mtx *priv_mtx);
500 void    usbd_transfer_submit(struct usb_xfer *xfer);
501 void    usbd_transfer_clear_stall(struct usb_xfer *xfer);
502 void    usbd_transfer_drain(struct usb_xfer *xfer);
503 uint8_t usbd_transfer_pending(struct usb_xfer *xfer);
504 void    usbd_transfer_start(struct usb_xfer *xfer);
505 void    usbd_transfer_stop(struct usb_xfer *xfer);
506 void    usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup);
507 void    usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max);
508 void    usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index,
509             uint8_t parent_index);
510 uint8_t usbd_get_bus_index(struct usb_device *udev);
511 uint8_t usbd_get_device_index(struct usb_device *udev);
512 void    usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode);
513 uint8_t usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode);
514 uint8_t usbd_device_attached(struct usb_device *udev);
515
516 usb_frlength_t
517         usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex);
518 void    usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen,
519             int *aframes, int *nframes);
520 struct usb_page_cache *usbd_xfer_get_frame(struct usb_xfer *xfer,
521             usb_frcount_t frindex);
522 void    *usbd_xfer_softc(struct usb_xfer *xfer);
523 void    *usbd_xfer_get_priv(struct usb_xfer *xfer);
524 void    usbd_xfer_set_priv(struct usb_xfer *xfer, void *);
525 void    usbd_xfer_set_interval(struct usb_xfer *xfer, int);
526 uint8_t usbd_xfer_state(struct usb_xfer *xfer);
527 void    usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
528             void *ptr, usb_frlength_t len);
529 void    usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
530             void **ptr, int *len);
531 void    usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset,
532             usb_frcount_t frindex);
533 usb_frlength_t usbd_xfer_max_len(struct usb_xfer *xfer);
534 usb_frlength_t usbd_xfer_max_framelen(struct usb_xfer *xfer);
535 usb_frcount_t usbd_xfer_max_frames(struct usb_xfer *xfer);
536 uint8_t usbd_xfer_get_fps_shift(struct usb_xfer *xfer);
537 usb_frlength_t usbd_xfer_frame_len(struct usb_xfer *xfer,
538             usb_frcount_t frindex);
539 void    usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex,
540             usb_frlength_t len);
541 void    usbd_xfer_set_timeout(struct usb_xfer *xfer, int timeout);
542 void    usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n);
543 void    usbd_xfer_set_stall(struct usb_xfer *xfer);
544 int     usbd_xfer_is_stalled(struct usb_xfer *xfer);
545 void    usbd_xfer_set_flag(struct usb_xfer *xfer, int flag);
546 void    usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag);
547 uint16_t usbd_xfer_get_timestamp(struct usb_xfer *xfer);
548
549 void    usbd_copy_in(struct usb_page_cache *cache, usb_frlength_t offset,
550             const void *ptr, usb_frlength_t len);
551 int     usbd_copy_in_user(struct usb_page_cache *cache, usb_frlength_t offset,
552             const void *ptr, usb_frlength_t len);
553 void    usbd_copy_out(struct usb_page_cache *cache, usb_frlength_t offset,
554             void *ptr, usb_frlength_t len);
555 int     usbd_copy_out_user(struct usb_page_cache *cache, usb_frlength_t offset,
556             void *ptr, usb_frlength_t len);
557 void    usbd_get_page(struct usb_page_cache *pc, usb_frlength_t offset,
558             struct usb_page_search *res);
559 void    usbd_m_copy_in(struct usb_page_cache *cache, usb_frlength_t dst_offset,
560             struct mbuf *m, usb_size_t src_offset, usb_frlength_t src_len);
561 void    usbd_frame_zero(struct usb_page_cache *cache, usb_frlength_t offset,
562             usb_frlength_t len);
563 void    usbd_start_re_enumerate(struct usb_device *udev);
564
565 int     usb_fifo_attach(struct usb_device *udev, void *priv_sc,
566             struct mtx *priv_mtx, struct usb_fifo_methods *pm,
567             struct usb_fifo_sc *f_sc, uint16_t unit, uint16_t subunit,
568             uint8_t iface_index, uid_t uid, gid_t gid, int mode);
569 void    usb_fifo_detach(struct usb_fifo_sc *f_sc);
570 int     usb_fifo_alloc_buffer(struct usb_fifo *f, uint32_t bufsize,
571             uint16_t nbuf);
572 void    usb_fifo_free_buffer(struct usb_fifo *f);
573 uint32_t usb_fifo_put_bytes_max(struct usb_fifo *fifo);
574 void    usb_fifo_put_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
575             usb_frlength_t offset, usb_frlength_t len, uint8_t what);
576 void    usb_fifo_put_data_linear(struct usb_fifo *fifo, void *ptr,
577             usb_size_t len, uint8_t what);
578 uint8_t usb_fifo_put_data_buffer(struct usb_fifo *f, void *ptr, usb_size_t len);
579 void    usb_fifo_put_data_error(struct usb_fifo *fifo);
580 uint8_t usb_fifo_get_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
581             usb_frlength_t offset, usb_frlength_t len, usb_frlength_t *actlen,
582             uint8_t what);
583 uint8_t usb_fifo_get_data_linear(struct usb_fifo *fifo, void *ptr,
584             usb_size_t len, usb_size_t *actlen, uint8_t what);
585 uint8_t usb_fifo_get_data_buffer(struct usb_fifo *f, void **pptr,
586             usb_size_t *plen);
587 void    usb_fifo_reset(struct usb_fifo *f);
588 void    usb_fifo_wakeup(struct usb_fifo *f);
589 void    usb_fifo_get_data_error(struct usb_fifo *fifo);
590 void    *usb_fifo_softc(struct usb_fifo *fifo);
591 void    usb_fifo_set_close_zlp(struct usb_fifo *, uint8_t);
592 void    usb_fifo_set_write_defrag(struct usb_fifo *, uint8_t);
593 void    usb_fifo_free(struct usb_fifo *f);
594 #endif /* _KERNEL */
595 #endif /* _USB_USBDI_H_ */