2 * Copyright (c) 2002 Takeshi Shibagaki
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
30 /* xe pccard interface driver */
32 #include <sys/param.h>
34 #include <sys/kernel.h>
35 #include <sys/module.h>
36 #include <sys/socket.h>
37 #include <sys/systm.h>
39 #include <machine/bus.h>
40 #include <machine/resource.h>
43 #include <net/ethernet.h>
45 #include <net/if_arp.h>
46 #include <net/if_media.h>
47 #include <net/if_mib.h>
49 #include <dev/xe/if_xereg.h>
50 #include <dev/xe/if_xevar.h>
52 #include <dev/pccard/pccardvar.h>
53 #include <dev/pccard/pccard_cis.h>
56 #include "pccarddevs.h"
59 * Debug logging levels - set with hw.xe.debug sysctl
61 * 1 = More hardware details, probe/attach progress
62 * 2 = Most function calls, ioctls and media selection progress
63 * 3 = Everything - interrupts, packets in/out and multicast address setup
70 #define DEVPRINTF(level, arg) if (xe_debug >= (level)) device_printf arg
71 #define DPRINTF(level, arg) if (xe_debug >= (level)) printf arg
73 #define DEVPRINTF(level, arg)
74 #define DPRINTF(level, arg)
78 #define XE_CARD_TYPE_FLAGS_NO 0x0
79 #define XE_CARD_TYPE_FLAGS_CE2 0x1
80 #define XE_CARD_TYPE_FLAGS_MOHAWK 0x2
81 #define XE_CARD_TYPE_FLAGS_DINGO 0x4
82 #define XE_PROD_ETHER_MASK 0x0100
83 #define XE_PROD_MODEM_MASK 0x1000
85 #define XE_BOGUS_MAC_OFFSET 0x90
87 /* MAC vendor prefix used by most Xircom cards is 00:80:c7 */
88 #define XE_MAC_ADDR_0 0x00
89 #define XE_MAC_ADDR_1 0x80
90 #define XE_MAC_ADDR_2 0xc7
92 /* Some (all?) REM56 cards have vendor prefix 00:10:a4 */
93 #define XE_REM56_MAC_ADDR_0 0x00
94 #define XE_REM56_MAC_ADDR_1 0x10
95 #define XE_REM56_MAC_ADDR_2 0xa4
97 struct xe_pccard_product {
98 struct pccard_product product;
103 static const struct xe_pccard_product xe_pccard_products[] = {
104 { PCMCIA_CARD_D(COMPAQ, CPQ550), 0x43, XE_CARD_TYPE_FLAGS_CE2 },
105 { PCMCIA_CARD_D(COMPAQ2, CPQ_10_100), 0x43, XE_CARD_TYPE_FLAGS_MOHAWK },
106 { PCMCIA_CARD_D(INTEL, EEPRO100), 0x43, XE_CARD_TYPE_FLAGS_MOHAWK },
107 { PCMCIA_CARD_D(INTEL, PRO100LAN56), 0x46, XE_CARD_TYPE_FLAGS_DINGO },
108 { PCMCIA_CARD_D(RACORE, ACCTON_EN2226),0x43, XE_CARD_TYPE_FLAGS_MOHAWK },
109 { PCMCIA_CARD_D(XIRCOM, CE), 0x41, XE_CARD_TYPE_FLAGS_NO },
110 { PCMCIA_CARD_D(XIRCOM, CE2), 0x41, XE_CARD_TYPE_FLAGS_CE2 },
111 { PCMCIA_CARD_D(XIRCOM, CE2), 0x42, XE_CARD_TYPE_FLAGS_CE2 },
112 { PCMCIA_CARD_D(XIRCOM, CE2_2), 0x41, XE_CARD_TYPE_FLAGS_CE2 },
113 { PCMCIA_CARD_D(XIRCOM, CE2_2), 0x42, XE_CARD_TYPE_FLAGS_CE2 },
114 { PCMCIA_CARD_D(XIRCOM, CE3), 0x43, XE_CARD_TYPE_FLAGS_MOHAWK },
115 { PCMCIA_CARD_D(XIRCOM, CEM), 0x41, XE_CARD_TYPE_FLAGS_NO },
116 { PCMCIA_CARD_D(XIRCOM, CEM2), 0x42, XE_CARD_TYPE_FLAGS_CE2 },
117 { PCMCIA_CARD_D(XIRCOM, CEM28), 0x43, XE_CARD_TYPE_FLAGS_CE2 },
118 { PCMCIA_CARD_D(XIRCOM, CEM33), 0x44, XE_CARD_TYPE_FLAGS_CE2 },
119 { PCMCIA_CARD_D(XIRCOM, CEM33_2), 0x44, XE_CARD_TYPE_FLAGS_CE2 },
120 { PCMCIA_CARD_D(XIRCOM, CEM56), 0x45, XE_CARD_TYPE_FLAGS_DINGO },
121 { PCMCIA_CARD_D(XIRCOM, CEM56_2), 0x46, XE_CARD_TYPE_FLAGS_DINGO },
122 { PCMCIA_CARD_D(XIRCOM, REM56), 0x46, XE_CARD_TYPE_FLAGS_DINGO },
123 { PCMCIA_CARD_D(XIRCOM, REM10), 0x47, XE_CARD_TYPE_FLAGS_DINGO },
124 { PCMCIA_CARD_D(XIRCOM, XEM5600), 0x56, XE_CARD_TYPE_FLAGS_DINGO },
129 * Fixing for CEM2, CEM3 and CEM56/REM56 cards. These need some magic to
130 * enable the Ethernet function, which isn't mentioned anywhere in the CIS.
131 * Despite the register names, most of this isn't Dingo-specific.
134 xe_cemfix(device_t dev)
136 struct xe_softc *sc = device_get_softc(dev);
139 DEVPRINTF(2, (dev, "cemfix\n"));
141 DEVPRINTF(1, (dev, "CEM I/O port 0x%0lx, size 0x%0lx\n",
142 bus_get_resource_start(dev, SYS_RES_IOPORT, sc->port_rid),
143 bus_get_resource_count(dev, SYS_RES_IOPORT, sc->port_rid)));
145 pccard_attr_write_1(dev, DINGO_ECOR, DINGO_ECOR_IRQ_LEVEL |
146 DINGO_ECOR_INT_ENABLE | DINGO_ECOR_IOB_ENABLE |
147 DINGO_ECOR_ETH_ENABLE);
148 ioport = bus_get_resource_start(dev, SYS_RES_IOPORT, sc->port_rid);
149 pccard_attr_write_1(dev, DINGO_EBAR0, ioport & 0xff);
150 pccard_attr_write_1(dev, DINGO_EBAR1, (ioport >> 8) & 0xff);
153 pccard_attr_write_1(dev, DINGO_DCOR0, DINGO_DCOR0_SF_INT);
154 pccard_attr_write_1(dev, DINGO_DCOR1, DINGO_DCOR1_INT_LEVEL |
156 pccard_attr_write_1(dev, DINGO_DCOR2, 0x00);
157 pccard_attr_write_1(dev, DINGO_DCOR3, 0x00);
158 pccard_attr_write_1(dev, DINGO_DCOR4, 0x00);
165 xe_pccard_product_match(device_t dev, const struct pccard_product* ent,
168 const struct xe_pccard_product* xpp;
174 xpp = (const struct xe_pccard_product*)ent;
175 pccard_get_prodext(dev, &prodext);
176 if (xpp->prodext != prodext)
183 static const struct xe_pccard_product *
184 xe_pccard_get_product(device_t dev)
186 return ((const struct xe_pccard_product *)pccard_product_lookup(dev,
187 (const struct pccard_product *)xe_pccard_products,
188 sizeof(xe_pccard_products[0]), xe_pccard_product_match));
192 * Fixing for CE2-class cards with bogus CIS entry for MAC address.
195 xe_pccard_mac(const struct pccard_tuple *tuple, void *argp)
197 uint8_t *enaddr = argp, test;
200 /* Code 0x89 is Xircom special cis node contianing the MAC */
201 if (tuple->code != 0x89)
204 /* Make sure this is a sane node */
205 if (tuple->length != ETHER_ADDR_LEN + 2)
207 test = pccard_tuple_read_1(tuple, 0);
208 if (test != PCCARD_TPLFE_TYPE_LAN_NID)
210 test = pccard_tuple_read_1(tuple, 1);
211 if (test != ETHER_ADDR_LEN)
214 /* Copy the MAC ADDR and return success */
215 for (i = 0; i < ETHER_ADDR_LEN; i++)
216 enaddr[i] = pccard_tuple_read_1(tuple, i + 2);
221 xe_bad_mac(uint8_t *enaddr)
226 for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
232 * PCMCIA attach routine.
233 * Identify the device. Called from the bus driver when the card is
234 * inserted or otherwise powers up.
237 xe_pccard_attach(device_t dev)
239 struct xe_softc *scp = device_get_softc(dev);
240 uint32_t vendor,product;
242 const char* vendor_str = NULL;
243 const char* product_str = NULL;
244 const char* cis4_str = NULL;
245 const char *cis3_str=NULL;
246 const struct xe_pccard_product *xpp;
249 DEVPRINTF(2, (dev, "pccard_attach\n"));
251 pccard_get_vendor(dev, &vendor);
252 pccard_get_product(dev, &product);
253 pccard_get_prodext(dev, &prodext);
254 pccard_get_vendor_str(dev, &vendor_str);
255 pccard_get_product_str(dev, &product_str);
256 pccard_get_cis3_str(dev, &cis3_str);
257 pccard_get_cis4_str(dev, &cis4_str);
259 DEVPRINTF(1, (dev, "vendor = 0x%04x\n", vendor));
260 DEVPRINTF(1, (dev, "product = 0x%04x\n", product));
261 DEVPRINTF(1, (dev, "prodext = 0x%02x\n", prodext));
262 DEVPRINTF(1, (dev, "vendor_str = %s\n", vendor_str));
263 DEVPRINTF(1, (dev, "product_str = %s\n", product_str));
264 DEVPRINTF(1, (dev, "cis3_str = %s\n", cis3_str));
265 DEVPRINTF(1, (dev, "cis4_str = %s\n", cis4_str));
267 xpp = xe_pccard_get_product(dev);
271 /* Set various card ID fields in softc */
272 scp->vendor = vendor_str;
273 scp->card_type = product_str;
274 if (xpp->flags & XE_CARD_TYPE_FLAGS_CE2)
276 if (xpp->flags & XE_CARD_TYPE_FLAGS_MOHAWK)
278 if (xpp->flags & XE_CARD_TYPE_FLAGS_DINGO) {
282 if (xpp->product.pp_product & XE_PROD_MODEM_MASK)
285 /* Get MAC address */
286 pccard_get_ether(dev, scp->enaddr);
288 /* Deal with bogus MAC address */
289 if (xe_bad_mac(scp->enaddr) &&
290 !pccard_cis_scan(dev, xe_pccard_mac, scp->enaddr)) {
292 "Unable to find MAC address for your %s card\n",
293 device_get_desc(dev));
297 if ((err = xe_activate(dev)) != 0)
300 /* Hack RealPorts into submission */
301 if (scp->modem && xe_cemfix(dev) < 0) {
302 device_printf(dev, "Unable to fix your %s combo card\n",
303 device_get_desc(dev));
307 if ((err = xe_attach(dev))) {
308 device_printf(dev, "xe_attach() failed! (%d)\n", err);
316 * The device entry is being removed, probably because someone ejected the
317 * card. The interface should have been brought down manually before calling
318 * this function; if not you may well lose packets. In any case, I shut down
319 * the card and the interface, and hope for the best.
322 xe_pccard_detach(device_t dev)
324 struct xe_softc *sc = device_get_softc(dev);
326 DEVPRINTF(2, (dev, "pccard_detach\n"));
331 callout_drain(&sc->media_timer);
332 callout_drain(&sc->wdog_timer);
333 ether_ifdetach(sc->ifp);
335 mtx_destroy(&sc->lock);
340 xe_pccard_probe(device_t dev)
342 const struct xe_pccard_product *xpp;
344 DEVPRINTF(2, (dev, "pccard_probe\n"));
347 * Xircom cards aren't proper MFC cards, so we have to take all
348 * cards that match, not just ones that are network.
351 /* If we match something in the table, it is our device. */
352 if ((xpp = xe_pccard_get_product(dev)) == NULL)
355 /* Set card name for logging later */
356 if (xpp->product.pp_name != NULL)
357 device_set_desc(dev, xpp->product.pp_name);
359 /* Reject known but unsupported cards */
360 if (xpp->flags & XE_CARD_TYPE_FLAGS_NO) {
361 device_printf(dev, "Sorry, your %s card is not supported :(\n",
362 device_get_desc(dev));
369 static device_method_t xe_pccard_methods[] = {
370 /* Device interface */
371 DEVMETHOD(device_probe, xe_pccard_probe),
372 DEVMETHOD(device_attach, xe_pccard_attach),
373 DEVMETHOD(device_detach, xe_pccard_detach),
378 static driver_t xe_pccard_driver = {
381 sizeof(struct xe_softc),
384 devclass_t xe_devclass;
386 DRIVER_MODULE(xe, pccard, xe_pccard_driver, xe_devclass, 0, 0);