2 * Copyright (c) 2002, Jeffrey Roberson <jeff@freebsd.org>
3 * Copyright (c) 2008-2009, Lawrence Stewart <lstewart@freebsd.org>
4 * Copyright (c) 2009-2010, The FreeBSD Foundation
7 * Portions of this software were developed at the Centre for Advanced
8 * Internet Architectures, Swinburne University of Technology, Melbourne,
9 * Australia by Lawrence Stewart under sponsorship from the FreeBSD Foundation.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice unmodified, this list of conditions, and the following
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in the
19 * documentation and/or other materials provided with the distribution.
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
38 #include <sys/param.h>
39 #include <sys/systm.h>
40 #include <sys/kernel.h>
41 #include <sys/kthread.h>
43 #include <sys/mount.h>
44 #include <sys/mutex.h>
45 #include <sys/namei.h>
47 #include <sys/vnode.h>
49 #include <sys/malloc.h>
50 #include <sys/unistd.h>
51 #include <sys/fcntl.h>
52 #include <sys/eventhandler.h>
54 #include <security/mac/mac_framework.h>
56 /* Async. Logging Queue */
58 char *aq_entbuf; /* Buffer for stored entries */
59 int aq_entmax; /* Max entries */
60 int aq_entlen; /* Entry length */
61 int aq_freebytes; /* Bytes available in buffer */
62 int aq_buflen; /* Total length of our buffer */
63 int aq_writehead; /* Location for next write */
64 int aq_writetail; /* Flush starts at this location */
65 int aq_wrapearly; /* # bytes left blank at end of buf */
66 int aq_flags; /* Queue flags */
67 int aq_waiters; /* Num threads waiting for resources
68 * NB: Used as a wait channel so must
69 * not be first field in the alq struct
71 struct ale aq_getpost; /* ALE for use by get/post */
72 struct mtx aq_mtx; /* Queue lock */
73 struct vnode *aq_vp; /* Open vnode handle */
74 struct ucred *aq_cred; /* Credentials of the opening thread */
75 LIST_ENTRY(alq) aq_act; /* List of active queues */
76 LIST_ENTRY(alq) aq_link; /* List of all queues */
79 #define AQ_WANTED 0x0001 /* Wakeup sleeper when io is done */
80 #define AQ_ACTIVE 0x0002 /* on the active list */
81 #define AQ_FLUSHING 0x0004 /* doing IO */
82 #define AQ_SHUTDOWN 0x0008 /* Queue no longer valid */
83 #define AQ_ORDERED 0x0010 /* Queue enforces ordered writes */
84 #define AQ_LEGACY 0x0020 /* Legacy queue (fixed length writes) */
86 #define ALQ_LOCK(alq) mtx_lock_spin(&(alq)->aq_mtx)
87 #define ALQ_UNLOCK(alq) mtx_unlock_spin(&(alq)->aq_mtx)
89 #define HAS_PENDING_DATA(alq) ((alq)->aq_freebytes != (alq)->aq_buflen)
91 static MALLOC_DEFINE(M_ALD, "ALD", "ALD");
94 * The ald_mtx protects the ald_queues list and the ald_active list.
96 static struct mtx ald_mtx;
97 static LIST_HEAD(, alq) ald_queues;
98 static LIST_HEAD(, alq) ald_active;
99 static int ald_shutingdown = 0;
100 struct thread *ald_thread;
101 static struct proc *ald_proc;
102 static eventhandler_tag alq_eventhandler_tag = NULL;
104 #define ALD_LOCK() mtx_lock(&ald_mtx)
105 #define ALD_UNLOCK() mtx_unlock(&ald_mtx)
107 /* Daemon functions */
108 static int ald_add(struct alq *);
109 static int ald_rem(struct alq *);
110 static void ald_startup(void *);
111 static void ald_daemon(void);
112 static void ald_shutdown(void *, int);
113 static void ald_activate(struct alq *);
114 static void ald_deactivate(struct alq *);
116 /* Internal queue functions */
117 static void alq_shutdown(struct alq *);
118 static void alq_destroy(struct alq *);
119 static int alq_doio(struct alq *);
123 * Add a new queue to the global list. Fail if we're shutting down.
126 ald_add(struct alq *alq)
133 if (ald_shutingdown) {
137 LIST_INSERT_HEAD(&ald_queues, alq, aq_link);
144 * Remove a queue from the global list unless we're shutting down. If so,
145 * the ald will take care of cleaning up it's resources.
148 ald_rem(struct alq *alq)
155 if (ald_shutingdown) {
159 LIST_REMOVE(alq, aq_link);
166 * Put a queue on the active list. This will schedule it for writing.
169 ald_activate(struct alq *alq)
171 LIST_INSERT_HEAD(&ald_active, alq, aq_act);
176 ald_deactivate(struct alq *alq)
178 LIST_REMOVE(alq, aq_act);
179 alq->aq_flags &= ~AQ_ACTIVE;
183 ald_startup(void *unused)
185 mtx_init(&ald_mtx, "ALDmtx", NULL, MTX_DEF|MTX_QUIET);
186 LIST_INIT(&ald_queues);
187 LIST_INIT(&ald_active);
196 ald_thread = FIRST_THREAD_IN_PROC(ald_proc);
198 alq_eventhandler_tag = EVENTHANDLER_REGISTER(shutdown_pre_sync,
199 ald_shutdown, NULL, SHUTDOWN_PRI_FIRST);
204 while ((alq = LIST_FIRST(&ald_active)) == NULL &&
206 mtx_sleep(&ald_active, &ald_mtx, PWAIT, "aldslp", 0);
208 /* Don't shutdown until all active ALQs are flushed. */
209 if (ald_shutingdown && alq == NULL) {
217 needwakeup = alq_doio(alq);
228 ald_shutdown(void *arg, int howto)
234 /* Ensure no new queues can be created. */
237 /* Shutdown all ALQs prior to terminating the ald_daemon. */
238 while ((alq = LIST_FIRST(&ald_queues)) != NULL) {
239 LIST_REMOVE(alq, aq_link);
245 /* At this point, all ALQs are flushed and shutdown. */
248 * Wake ald_daemon so that it exits. It won't be able to do
249 * anything until we mtx_sleep because we hold the ald_mtx.
253 /* Wait for ald_daemon to exit. */
254 mtx_sleep(ald_proc, &ald_mtx, PWAIT, "aldslp", 0);
260 alq_shutdown(struct alq *alq)
264 /* Stop any new writers. */
265 alq->aq_flags |= AQ_SHUTDOWN;
268 * If the ALQ isn't active but has unwritten data (possible if
269 * the ALQ_NOACTIVATE flag has been used), explicitly activate the
270 * ALQ here so that the pending data gets flushed by the ald_daemon.
272 if (!(alq->aq_flags & AQ_ACTIVE) && HAS_PENDING_DATA(alq)) {
273 alq->aq_flags |= AQ_ACTIVE;
282 while (alq->aq_flags & AQ_ACTIVE) {
283 alq->aq_flags |= AQ_WANTED;
284 msleep_spin(alq, &alq->aq_mtx, "aldclose", 0);
288 vn_close(alq->aq_vp, FWRITE, alq->aq_cred,
290 crfree(alq->aq_cred);
294 alq_destroy(struct alq *alq)
296 /* Drain all pending IO. */
299 mtx_destroy(&alq->aq_mtx);
300 free(alq->aq_entbuf, M_ALD);
305 * Flush all pending data to disk. This operation will block.
308 alq_doio(struct alq *alq)
314 struct iovec aiov[2];
320 KASSERT((HAS_PENDING_DATA(alq)), ("%s: queue empty!", __func__));
326 wrapearly = alq->aq_wrapearly;
328 bzero(&aiov, sizeof(aiov));
329 bzero(&auio, sizeof(auio));
331 /* Start the write from the location of our buffer tail pointer. */
332 aiov[0].iov_base = alq->aq_entbuf + alq->aq_writetail;
334 if (alq->aq_writetail < alq->aq_writehead) {
335 /* Buffer not wrapped. */
336 totlen = aiov[0].iov_len = alq->aq_writehead - alq->aq_writetail;
337 } else if (alq->aq_writehead == 0) {
338 /* Buffer not wrapped (special case to avoid an empty iov). */
339 totlen = aiov[0].iov_len = alq->aq_buflen - alq->aq_writetail -
343 * Buffer wrapped, requires 2 aiov entries:
344 * - first is from writetail to end of buffer
345 * - second is from start of buffer to writehead
347 aiov[0].iov_len = alq->aq_buflen - alq->aq_writetail -
350 aiov[1].iov_base = alq->aq_entbuf;
351 aiov[1].iov_len = alq->aq_writehead;
352 totlen = aiov[0].iov_len + aiov[1].iov_len;
355 alq->aq_flags |= AQ_FLUSHING;
358 auio.uio_iov = &aiov[0];
360 auio.uio_segflg = UIO_SYSSPACE;
361 auio.uio_rw = UIO_WRITE;
362 auio.uio_iovcnt = iov;
363 auio.uio_resid = totlen;
367 * Do all of the junk required to write now.
369 vfslocked = VFS_LOCK_GIANT(vp->v_mount);
370 vn_start_write(vp, &mp, V_WAIT);
371 vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
373 * XXX: VOP_WRITE error checks are ignored.
376 if (mac_vnode_check_write(alq->aq_cred, NOCRED, vp) == 0)
378 VOP_WRITE(vp, &auio, IO_UNIT | IO_APPEND, alq->aq_cred);
380 vn_finished_write(mp);
381 VFS_UNLOCK_GIANT(vfslocked);
384 alq->aq_flags &= ~AQ_FLUSHING;
386 /* Adjust writetail as required, taking into account wrapping. */
387 alq->aq_writetail = (alq->aq_writetail + totlen + wrapearly) %
389 alq->aq_freebytes += totlen + wrapearly;
392 * If we just flushed part of the buffer which wrapped, reset the
393 * wrapearly indicator.
396 alq->aq_wrapearly = 0;
399 * If we just flushed the buffer completely, reset indexes to 0 to
400 * minimise buffer wraps.
401 * This is also required to ensure alq_getn() can't wedge itself.
403 if (!HAS_PENDING_DATA(alq))
404 alq->aq_writehead = alq->aq_writetail = 0;
406 KASSERT((alq->aq_writetail >= 0 && alq->aq_writetail < alq->aq_buflen),
407 ("%s: aq_writetail < 0 || aq_writetail >= aq_buflen", __func__));
409 if (alq->aq_flags & AQ_WANTED) {
410 alq->aq_flags &= ~AQ_WANTED;
417 static struct kproc_desc ald_kp = {
423 SYSINIT(aldthread, SI_SUB_KTHREAD_IDLE, SI_ORDER_ANY, kproc_start, &ald_kp);
424 SYSINIT(ald, SI_SUB_LOCK, SI_ORDER_ANY, ald_startup, NULL);
427 /* User visible queue functions */
430 * Create the queue data structure, allocate the buffer, and open the file.
434 alq_open_flags(struct alq **alqp, const char *file, struct ucred *cred, int cmode,
444 KASSERT((size > 0), ("%s: size <= 0", __func__));
449 NDINIT(&nd, LOOKUP, NOFOLLOW | MPSAFE, UIO_SYSSPACE, file, td);
450 oflags = FWRITE | O_NOFOLLOW | O_CREAT;
452 error = vn_open_cred(&nd, &oflags, cmode, 0, cred, NULL);
456 vfslocked = NDHASGIANT(&nd);
457 NDFREE(&nd, NDF_ONLY_PNBUF);
458 /* We just unlock so we hold a reference */
459 VOP_UNLOCK(nd.ni_vp, 0);
460 VFS_UNLOCK_GIANT(vfslocked);
462 alq = malloc(sizeof(*alq), M_ALD, M_WAITOK|M_ZERO);
463 alq->aq_vp = nd.ni_vp;
464 alq->aq_cred = crhold(cred);
466 mtx_init(&alq->aq_mtx, "ALD Queue", NULL, MTX_SPIN|MTX_QUIET);
468 alq->aq_buflen = size;
472 alq->aq_freebytes = alq->aq_buflen;
473 alq->aq_entbuf = malloc(alq->aq_buflen, M_ALD, M_WAITOK|M_ZERO);
474 alq->aq_writehead = alq->aq_writetail = 0;
475 if (flags & ALQ_ORDERED)
476 alq->aq_flags |= AQ_ORDERED;
478 if ((error = ald_add(alq)) != 0) {
489 alq_open(struct alq **alqp, const char *file, struct ucred *cred, int cmode,
494 KASSERT((count >= 0), ("%s: count < 0", __func__));
497 ret = alq_open_flags(alqp, file, cred, cmode, size*count, 0);
498 (*alqp)->aq_flags |= AQ_LEGACY;
499 (*alqp)->aq_entmax = count;
500 (*alqp)->aq_entlen = size;
502 ret = alq_open_flags(alqp, file, cred, cmode, size, 0);
509 * Copy a new entry into the queue. If the operation would block either
510 * wait or return an error depending on the value of waitok.
513 alq_writen(struct alq *alq, void *data, int len, int flags)
515 int activate, copy, ret;
518 KASSERT((len > 0 && len <= alq->aq_buflen),
519 ("%s: len <= 0 || len > aq_buflen", __func__));
528 * Fail to perform the write and return EWOULDBLOCK if:
529 * - The message is larger than our underlying buffer.
530 * - The ALQ is being shutdown.
531 * - There is insufficient free space in our underlying buffer
532 * to accept the message and the user can't wait for space.
533 * - There is insufficient free space in our underlying buffer
534 * to accept the message and the alq is inactive due to prior
535 * use of the ALQ_NOACTIVATE flag (which would lead to deadlock).
537 if (len > alq->aq_buflen ||
538 alq->aq_flags & AQ_SHUTDOWN ||
539 (((flags & ALQ_NOWAIT) || (!(alq->aq_flags & AQ_ACTIVE) &&
540 HAS_PENDING_DATA(alq))) && alq->aq_freebytes < len)) {
542 return (EWOULDBLOCK);
546 * If we want ordered writes and there is already at least one thread
547 * waiting for resources to become available, sleep until we're woken.
549 if (alq->aq_flags & AQ_ORDERED && alq->aq_waiters > 0) {
550 KASSERT(!(flags & ALQ_NOWAIT),
551 ("%s: ALQ_NOWAIT set but incorrectly ignored!", __func__));
553 msleep_spin(&alq->aq_waiters, &alq->aq_mtx, "alqwnord", 0);
558 * (ALQ_WAITOK && aq_freebytes < len) or aq_freebytes >= len, either
559 * enter while loop and sleep until we have enough free bytes (former)
560 * or skip (latter). If AQ_ORDERED is set, only 1 thread at a time will
561 * be in this loop. Otherwise, multiple threads may be sleeping here
562 * competing for ALQ resources.
564 while (alq->aq_freebytes < len && !(alq->aq_flags & AQ_SHUTDOWN)) {
565 KASSERT(!(flags & ALQ_NOWAIT),
566 ("%s: ALQ_NOWAIT set but incorrectly ignored!", __func__));
567 alq->aq_flags |= AQ_WANTED;
571 msleep_spin(alq, &alq->aq_mtx, "alqwnres", 0);
575 * If we're the first thread to wake after an AQ_WANTED wakeup
576 * but there isn't enough free space for us, we're going to loop
577 * and sleep again. If there are other threads waiting in this
578 * loop, schedule a wakeup so that they can see if the space
579 * they require is available.
581 if (alq->aq_waiters > 0 && !(alq->aq_flags & AQ_ORDERED) &&
582 alq->aq_freebytes < len && !(alq->aq_flags & AQ_WANTED))
589 * If there are waiters, we need to signal the waiting threads after we
590 * complete our work. The alq ptr is used as a wait channel for threads
591 * requiring resources to be freed up. In the AQ_ORDERED case, threads
592 * are not allowed to concurrently compete for resources in the above
593 * while loop, so we use a different wait channel in this case.
595 if (alq->aq_waiters > 0) {
596 if (alq->aq_flags & AQ_ORDERED)
597 waitchan = &alq->aq_waiters;
603 /* Bail if we're shutting down. */
604 if (alq->aq_flags & AQ_SHUTDOWN) {
610 * If we need to wrap the buffer to accommodate the write,
611 * we'll need 2 calls to bcopy.
613 if ((alq->aq_buflen - alq->aq_writehead) < len)
614 copy = alq->aq_buflen - alq->aq_writehead;
616 /* Copy message (or part thereof if wrap required) to the buffer. */
617 bcopy(data, alq->aq_entbuf + alq->aq_writehead, copy);
618 alq->aq_writehead += copy;
620 if (alq->aq_writehead >= alq->aq_buflen) {
621 KASSERT((alq->aq_writehead == alq->aq_buflen),
622 ("%s: alq->aq_writehead (%d) > alq->aq_buflen (%d)",
626 alq->aq_writehead = 0;
631 * Wrap the buffer by copying the remainder of our message
632 * to the start of the buffer and resetting aq_writehead.
634 bcopy(((uint8_t *)data)+copy, alq->aq_entbuf, len - copy);
635 alq->aq_writehead = len - copy;
638 KASSERT((alq->aq_writehead >= 0 && alq->aq_writehead < alq->aq_buflen),
639 ("%s: aq_writehead < 0 || aq_writehead >= aq_buflen", __func__));
641 alq->aq_freebytes -= len;
643 if (!(alq->aq_flags & AQ_ACTIVE) && !(flags & ALQ_NOACTIVATE)) {
644 alq->aq_flags |= AQ_ACTIVE;
648 KASSERT((HAS_PENDING_DATA(alq)), ("%s: queue empty!", __func__));
659 /* NB: We rely on wakeup_one waking threads in a FIFO manner. */
660 if (waitchan != NULL)
661 wakeup_one(waitchan);
667 alq_write(struct alq *alq, void *data, int flags)
669 /* Should only be called in fixed length message (legacy) mode. */
670 KASSERT((alq->aq_flags & AQ_LEGACY),
671 ("%s: fixed length write on variable length queue", __func__));
672 return (alq_writen(alq, data, alq->aq_entlen, flags));
676 * Retrieve a pointer for the ALQ to write directly into, avoiding bcopy.
679 alq_getn(struct alq *alq, int len, int flags)
684 KASSERT((len > 0 && len <= alq->aq_buflen),
685 ("%s: len <= 0 || len > alq->aq_buflen", __func__));
692 * Determine the number of free contiguous bytes.
693 * We ensure elsewhere that if aq_writehead == aq_writetail because
694 * the buffer is empty, they will both be set to 0 and therefore
695 * aq_freebytes == aq_buflen and is fully contiguous.
696 * If they are equal and the buffer is not empty, aq_freebytes will
697 * be 0 indicating the buffer is full.
699 if (alq->aq_writehead <= alq->aq_writetail)
700 contigbytes = alq->aq_freebytes;
702 contigbytes = alq->aq_buflen - alq->aq_writehead;
704 if (contigbytes < len) {
706 * Insufficient space at end of buffer to handle a
707 * contiguous write. Wrap early if there's space at
708 * the beginning. This will leave a hole at the end
709 * of the buffer which we will have to skip over when
710 * flushing the buffer to disk.
712 if (alq->aq_writetail >= len || flags & ALQ_WAITOK) {
713 /* Keep track of # bytes left blank. */
714 alq->aq_wrapearly = contigbytes;
715 /* Do the wrap and adjust counters. */
716 contigbytes = alq->aq_freebytes =
718 alq->aq_writehead = 0;
724 * Return a NULL ALE if:
725 * - The message is larger than our underlying buffer.
726 * - The ALQ is being shutdown.
727 * - There is insufficient free space in our underlying buffer
728 * to accept the message and the user can't wait for space.
729 * - There is insufficient free space in our underlying buffer
730 * to accept the message and the alq is inactive due to prior
731 * use of the ALQ_NOACTIVATE flag (which would lead to deadlock).
733 if (len > alq->aq_buflen ||
734 alq->aq_flags & AQ_SHUTDOWN ||
735 (((flags & ALQ_NOWAIT) || (!(alq->aq_flags & AQ_ACTIVE) &&
736 HAS_PENDING_DATA(alq))) && contigbytes < len)) {
742 * If we want ordered writes and there is already at least one thread
743 * waiting for resources to become available, sleep until we're woken.
745 if (alq->aq_flags & AQ_ORDERED && alq->aq_waiters > 0) {
746 KASSERT(!(flags & ALQ_NOWAIT),
747 ("%s: ALQ_NOWAIT set but incorrectly ignored!", __func__));
749 msleep_spin(&alq->aq_waiters, &alq->aq_mtx, "alqgnord", 0);
754 * (ALQ_WAITOK && contigbytes < len) or contigbytes >= len, either enter
755 * while loop and sleep until we have enough contiguous free bytes
756 * (former) or skip (latter). If AQ_ORDERED is set, only 1 thread at a
757 * time will be in this loop. Otherwise, multiple threads may be
758 * sleeping here competing for ALQ resources.
760 while (contigbytes < len && !(alq->aq_flags & AQ_SHUTDOWN)) {
761 KASSERT(!(flags & ALQ_NOWAIT),
762 ("%s: ALQ_NOWAIT set but incorrectly ignored!", __func__));
763 alq->aq_flags |= AQ_WANTED;
767 msleep_spin(alq, &alq->aq_mtx, "alqgnres", 0);
770 if (alq->aq_writehead <= alq->aq_writetail)
771 contigbytes = alq->aq_freebytes;
773 contigbytes = alq->aq_buflen - alq->aq_writehead;
776 * If we're the first thread to wake after an AQ_WANTED wakeup
777 * but there isn't enough free space for us, we're going to loop
778 * and sleep again. If there are other threads waiting in this
779 * loop, schedule a wakeup so that they can see if the space
780 * they require is available.
782 if (alq->aq_waiters > 0 && !(alq->aq_flags & AQ_ORDERED) &&
783 contigbytes < len && !(alq->aq_flags & AQ_WANTED))
790 * If there are waiters, we need to signal the waiting threads after we
791 * complete our work. The alq ptr is used as a wait channel for threads
792 * requiring resources to be freed up. In the AQ_ORDERED case, threads
793 * are not allowed to concurrently compete for resources in the above
794 * while loop, so we use a different wait channel in this case.
796 if (alq->aq_waiters > 0) {
797 if (alq->aq_flags & AQ_ORDERED)
798 waitchan = &alq->aq_waiters;
804 /* Bail if we're shutting down. */
805 if (alq->aq_flags & AQ_SHUTDOWN) {
807 if (waitchan != NULL)
808 wakeup_one(waitchan);
813 * If we are here, we have a contiguous number of bytes >= len
814 * available in our buffer starting at aq_writehead.
816 alq->aq_getpost.ae_data = alq->aq_entbuf + alq->aq_writehead;
817 alq->aq_getpost.ae_bytesused = len;
819 return (&alq->aq_getpost);
823 alq_get(struct alq *alq, int flags)
825 /* Should only be called in fixed length message (legacy) mode. */
826 KASSERT((alq->aq_flags & AQ_LEGACY),
827 ("%s: fixed length get on variable length queue", __func__));
828 return (alq_getn(alq, alq->aq_entlen, flags));
832 alq_post_flags(struct alq *alq, struct ale *ale, int flags)
839 if (ale->ae_bytesused > 0) {
840 if (!(alq->aq_flags & AQ_ACTIVE) &&
841 !(flags & ALQ_NOACTIVATE)) {
842 alq->aq_flags |= AQ_ACTIVE;
846 alq->aq_writehead += ale->ae_bytesused;
847 alq->aq_freebytes -= ale->ae_bytesused;
849 /* Wrap aq_writehead if we filled to the end of the buffer. */
850 if (alq->aq_writehead == alq->aq_buflen)
851 alq->aq_writehead = 0;
853 KASSERT((alq->aq_writehead >= 0 &&
854 alq->aq_writehead < alq->aq_buflen),
855 ("%s: aq_writehead < 0 || aq_writehead >= aq_buflen",
858 KASSERT((HAS_PENDING_DATA(alq)), ("%s: queue empty!", __func__));
862 * If there are waiters, we need to signal the waiting threads after we
863 * complete our work. The alq ptr is used as a wait channel for threads
864 * requiring resources to be freed up. In the AQ_ORDERED case, threads
865 * are not allowed to concurrently compete for resources in the
866 * alq_getn() while loop, so we use a different wait channel in this case.
868 if (alq->aq_waiters > 0) {
869 if (alq->aq_flags & AQ_ORDERED)
870 waitchan = &alq->aq_waiters;
884 /* NB: We rely on wakeup_one waking threads in a FIFO manner. */
885 if (waitchan != NULL)
886 wakeup_one(waitchan);
890 alq_flush(struct alq *alq)
898 * Pull the lever iff there is data to flush and we're
899 * not already in the middle of a flush operation.
901 if (HAS_PENDING_DATA(alq) && !(alq->aq_flags & AQ_FLUSHING)) {
902 if (alq->aq_flags & AQ_ACTIVE)
906 needwakeup = alq_doio(alq);
917 * Flush remaining data, close the file and free all resources.
920 alq_close(struct alq *alq)
922 /* Only flush and destroy alq if not already shutting down. */
923 if (ald_rem(alq) == 0)
928 alq_load_handler(module_t mod, int what, void *arg)
941 /* Only allow unload if there are no open queues. */
942 if (LIST_FIRST(&ald_queues) == NULL) {
945 EVENTHANDLER_DEREGISTER(shutdown_pre_sync,
946 alq_eventhandler_tag);
947 ald_shutdown(NULL, 0);
948 mtx_destroy(&ald_mtx);
956 /* If MOD_QUIESCE failed we must fail here too. */
957 if (ald_shutingdown == 0)
969 static moduledata_t alq_mod =
976 DECLARE_MODULE(alq, alq_mod, SI_SUB_SMP, SI_ORDER_ANY);
977 MODULE_VERSION(alq, 1);