1 /* $NetBSD: maltareg.h,v 1.1 2002/03/07 14:44:04 simonb Exp $ */
4 * Copyright 2002 Wasabi Systems, Inc.
7 * Written by Simon Burge for Wasabi Systems, Inc.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed for the NetBSD Project by
20 * Wasabi Systems, Inc.
21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22 * or promote products derived from this software without specific prior
25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGE.
43 0000.0000 * 128MB Typically SDRAM (on Core Board)
44 0800.0000 * 256MB Typically PCI
45 1800.0000 * 62MB Typically PCI
46 1be0.0000 * 2MB Typically System controller's internal registers
47 1c00.0000 * 32MB Typically not used
48 1e00.0000 4MB Monitor Flash
49 1e40.0000 12MB reserved
50 1f00.0000 12MB Switches
58 1f10.0000 * 11MB Typically System Controller specific
59 1fc0.0000 4MB Maps to Monitor Flash
60 1fd0.0000 * 3MB Typically System Controller specific
62 * depends on implementation of the Core Board and of software
68 NMI South Bridge or NMI button
74 5 Not used, driven inactive (typically CPU internal timer interrupt
76 IRQ mapping (as used by YAMON)
80 2 Reserved by South Bridge (for cascading)
85 7 Parallel Port SuperIO
86 8 Real Time Clock South Bridge
87 9 I2C bus South Bridge
88 10 PCI A,B,eth PCI slot 1..4, Ethernet
89 11 PCI C,audio PCI slot 1..4, Audio, USB (South Bridge)
92 13 Reserved by South Bridge
93 14 Primary IDE Primary IDE slot
94 15 Secondary IDE Secondary IDE slot/Compact flash connector
97 #define MALTA_SYSTEMRAM_BASE 0x00000000ul /* System RAM: */
98 #define MALTA_SYSTEMRAM_SIZE 0x08000000 /* 128 MByte */
100 #define MALTA_PCIMEM1_BASE 0x08000000ul /* PCI 1 memory: */
101 #define MALTA_PCIMEM1_SIZE 0x08000000 /* 128 MByte */
103 #define MALTA_PCIMEM2_BASE 0x10000000ul /* PCI 2 memory: */
104 #define MALTA_PCIMEM2_SIZE 0x08000000 /* 128 MByte */
106 #define MALTA_PCIMEM3_BASE 0x18000000ul /* PCI 3 memory */
107 #define MALTA_PCIMEM3_SIZE 0x03e00000 /* 62 MByte */
109 #define MALTA_CORECTRL_BASE 0x1be00000ul /* Core control: */
110 #define MALTA_CORECTRL_SIZE 0x00200000 /* 2 MByte */
112 #define MALTA_RESERVED_BASE1 0x1c000000ul /* Reserved: */
113 #define MALTA_RESERVED_SIZE1 0x02000000 /* 32 MByte */
115 #define MALTA_MONITORFLASH_BASE 0x1e000000ul /* Monitor Flash: */
116 #define MALTA_MONITORFLASH_SIZE 0x003e0000 /* 4 MByte */
117 #define MALTA_MONITORFLASH_SECTORSIZE 0x00010000 /* Sect. = 64 KB */
119 #define MALTA_FILEFLASH_BASE 0x1e3e0000ul /* File Flash (for monitor): */
120 #define MALTA_FILEFLASH_SIZE 0x00020000 /* 128 KByte */
122 #define MALTA_FILEFLASH_SECTORSIZE 0x00010000 /* Sect. = 64 KB */
124 #define MALTA_RESERVED_BASE2 0x1e400000ul /* Reserved: */
125 #define MALTA_RESERVED_SIZE2 0x00c00000 /* 12 MByte */
127 #define MALTA_FPGA_BASE 0x1f000000ul /* FPGA: */
128 #define MALTA_FPGA_SIZE 0x00c00000 /* 12 MByte */
130 #define MALTA_NMISTATUS (MALTA_FPGA_BASE + 0x24)
131 #define MALTA_NMI_SB 0x2 /* Pending NMI from the South Bridge */
132 #define MALTA_NMI_ONNMI 0x1 /* Pending NMI from the ON/NMI push button */
134 #define MALTA_NMIACK (MALTA_FPGA_BASE + 0x104)
135 #define MALTA_NMIACK_ONNMI 0x1 /* Write 1 to acknowledge ON/NMI */
137 #define MALTA_SWITCH (MALTA_FPGA_BASE + 0x200)
138 #define MALTA_SWITCH_MASK 0xff /* settings of DIP switch S2 */
140 #define MALTA_STATUS (MALTA_FPGA_BASE + 0x208)
141 #define MALTA_ST_MFWR 0x10 /* Monitor Flash is write protected (JP1) */
142 #define MALTA_S54 0x08 /* switch S5-4 - set YAMON factory default mode */
143 #define MALTA_S53 0x04 /* switch S5-3 */
144 #define MALTA_BIGEND 0x02 /* switch S5-2 - big endian mode */
146 #define MALTA_JMPRS (MALTA_FPGA_BASE + 0x210)
147 #define MALTA_JMPRS_PCICLK 0x1c /* PCI clock frequency */
148 #define MALTA_JMPRS_EELOCK 0x02 /* I2C EEPROM is write protected */
150 #define MALTA_LEDBAR (MALTA_FPGA_BASE + 0x408)
151 #define MALTA_ASCIIWORD (MALTA_FPGA_BASE + 0x410)
152 #define MALTA_ASCII_BASE (MALTA_FPGA_BASE + 0x418)
153 #define MALTA_ASCIIPOS0 0x00
154 #define MALTA_ASCIIPOS1 0x08
155 #define MALTA_ASCIIPOS2 0x10
156 #define MALTA_ASCIIPOS3 0x18
157 #define MALTA_ASCIIPOS4 0x20
158 #define MALTA_ASCIIPOS5 0x28
159 #define MALTA_ASCIIPOS6 0x30
160 #define MALTA_ASCIIPOS7 0x38
162 #define MALTA_SOFTRES (MALTA_FPGA_BASE + 0x500)
163 #define MALTA_GORESET 0x42 /* write this to MALTA_SOFTRES for board reset */
166 * BRKRES is the number of milliseconds before a "break" on tty will
167 * trigger a reset. A value of 0 will disable the reset.
169 #define MALTA_BRKRES (MALTA_FPGA_BASE + 0x508)
170 #define MALTA_BRKRES_MASK 0xff
172 #define MALTA_CBUSUART (MALTA_FPGA_BASE + 0x900)
173 /* 16C550C UART, 8 bit registers on 8 byte boundaries */
182 #define MALTA_CBUSUART_INTR 2
184 #define MALTA_GPIO_BASE (MALTA_FPGA_BASE + 0xa00)
185 #define MALTA_GPOUT 0x0
186 #define MALTA_GPINP 0x8
188 #define MALTA_I2C_BASE (MALTA_FPGA_BASE + 0xb00)
189 #define MALTA_I2CINP 0x00
190 #define MALTA_I2COE 0x08
191 #define MALTA_I2COUT 0x10
192 #define MALTA_I2CSEL 0x18
194 #define MALTA_BOOTROM_BASE 0x1fc00000ul /* Boot ROM: */
195 #define MALTA_BOOTROM_SIZE 0x00400000 /* 4 MByte */
197 #define MALTA_REVISION 0x1fc00010ul
198 #define MALTA_REV_FPGRV 0xff0000 /* CBUS FPGA revision */
199 #define MALTA_REV_CORID 0x00fc00 /* Core Board ID */
200 #define MALTA_REV_CORRV 0x000300 /* Core Board Revision */
201 #define MALTA_REV_PROID 0x0000f0 /* Product ID */
202 #define MALTA_REV_PRORV 0x00000f /* Product Revision */
204 /* PCI definitions */
205 #define MALTA_SOUTHBRIDGE_INTR 0
207 #define MALTA_PCI0_IO_BASE MALTA_PCIMEM3_BASE
208 #define MALTA_PCI0_ADDR( addr ) (MALTA_PCI0_IO_BASE + (addr))
210 #define MALTA_RTCADR 0x70 // MALTA_PCI_IO_ADDR8(0x70)
211 #define MALTA_RTCDAT 0x71 // MALTA_PCI_IO_ADDR8(0x71)
213 #define MALTA_SMSC_COM1_ADR 0x3f8
214 #define MALTA_SMSC_COM2_ADR 0x2f8
215 #define MALTA_UART0ADR MALTA_PCI0_ADDR(MALTA_SMSC_COM1_ADR)
216 #define MALTA_UART1ADR MALTA_SMSC_COM2_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_COM2_ADR)
218 #define MALTA_SMSC_1284_ADR 0x378
219 #define MALTA_1284ADR MALTA_SMSC_1284_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_1284_ADR)
221 #define MALTA_SMSC_FDD_ADR 0x3f0
222 #define MALTA_FDDADR MALTA_SMSC_FDD_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_FDD_ADR)
224 #define MALTA_SMSC_KYBD_ADR 0x60 /* Fixed 0x60, 0x64 */
225 #define MALTA_KYBDADR MALTA_SMSC_KYBD_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_KYBD_ADR)
226 #define MALTA_SMSC_MOUSE_ADR MALTA_SMSC_KYBD_ADR
227 #define MALTA_MOUSEADR MALTA_KYBDADR
230 #define MALTA_DMA_PCI_PCIBASE 0x00000000UL
231 #define MALTA_DMA_PCI_PHYSBASE 0x00000000UL
232 #define MALTA_DMA_PCI_SIZE (256 * 1024 * 1024)
234 #define MALTA_DMA_ISA_PCIBASE 0x00800000UL
235 #define MALTA_DMA_ISA_PHYSBASE 0x00000000UL
236 #define MALTA_DMA_ISA_SIZE (8 * 1024 * 1024)
239 void led_bar(uint8_t);
240 void led_display_word(uint32_t);
241 void led_display_str(const char *);
242 void led_display_char(int, uint8_t);