2 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved.
3 * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
4 * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
9 * a) Redistributions of source code must retain the above copyright notice,
10 * this list of conditions and the following disclaimer.
12 * b) Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the distribution.
16 * c) Neither the name of Cisco Systems, Inc. nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
36 #ifndef _NETINET_SCTP_CONSTANTS_H_
37 #define _NETINET_SCTP_CONSTANTS_H_
39 /* IANA assigned port number for SCTP over UDP encapsulation */
40 /* For freebsd we cannot bind the port at
41 * startup. Otherwise what will happen is
42 * we really won't be bound. The user must
43 * put it into the sysctl... or we need
44 * to build a special timer for this to allow
45 * us to wait 1 second or so after the system
48 #define SCTP_OVER_UDP_TUNNELING_PORT 0
49 /* Number of packets to get before sack sent by default */
50 #define SCTP_DEFAULT_SACK_FREQ 2
52 /* Address limit - This variable is calculated
53 * based on an 65535 byte max ip packet. We take out 100 bytes
54 * for the cookie, 40 bytes for a v6 header and 32
55 * bytes for the init structure. A second init structure
56 * for the init-ack and then finally a third one for the
57 * imbedded init. This yeilds 100+40+(3 * 32) = 236 bytes.
58 * This leaves 65299 bytes for addresses. We throw out the 299 bytes.
59 * Now whatever we send in the INIT() we need to allow to get back in the
60 * INIT-ACK plus all the values from INIT and INIT-ACK
61 * listed in the cookie. Plus we need some overhead for
62 * maybe copied parameters in the COOKIE. If we
63 * allow 1080 addresses, and each side has 1080 V6 addresses
64 * that will be 21600 bytes. In the INIT-ACK we will
65 * see the INIT-ACK 21600 + 43200 in the cookie. This leaves
66 * about 500 bytes slack for misc things in the cookie.
68 #define SCTP_ADDRESS_LIMIT 1080
70 /* We need at least 2k of space for us, inits
71 * larger than that lets abort.
73 #define SCTP_LARGEST_INIT_ACCEPTED (65535 - 2048)
75 /* Number of addresses where we just skip the counting */
76 #define SCTP_COUNT_LIMIT 40
78 #define SCTP_ZERO_COPY_TICK_DELAY (((100 * hz) + 999) / 1000)
79 #define SCTP_ZERO_COPY_SENDQ_TICK_DELAY (((100 * hz) + 999) / 1000)
81 /* Number of ticks to delay before running
82 * iterator on an address change.
84 #define SCTP_ADDRESS_TICK_DELAY 2
86 #define SCTP_VERSION_STRING "KAME-BSD 1.1"
87 /* #define SCTP_AUDITING_ENABLED 1 used for debug/auditing */
88 #define SCTP_AUDIT_SIZE 256
91 #define SCTP_KTRHEAD_NAME "sctp_iterator"
92 #define SCTP_KTHREAD_PAGES 0
94 #define SCTP_MCORE_NAME "sctp_core_worker"
97 /* If you support Multi-VRF how big to
98 * make the initial array of VRF's to.
100 #define SCTP_DEFAULT_VRF_SIZE 4
102 /* constants for rto calc */
103 #define sctp_align_safe_nocopy 0
104 #define sctp_align_unsafe_makecopy 1
106 /* JRS - Values defined for the HTCP algorithm */
107 #define ALPHA_BASE (1<<7) /* 1.0 with shift << 7 */
108 #define BETA_MIN (1<<6) /* 0.5 with shift << 7 */
109 #define BETA_MAX 102 /* 0.8 with shift << 7 */
111 /* Places that CWND log can happen from */
112 #define SCTP_CWND_LOG_FROM_FR 1
113 #define SCTP_CWND_LOG_FROM_RTX 2
114 #define SCTP_CWND_LOG_FROM_BRST 3
115 #define SCTP_CWND_LOG_FROM_SS 4
116 #define SCTP_CWND_LOG_FROM_CA 5
117 #define SCTP_CWND_LOG_FROM_SAT 6
118 #define SCTP_BLOCK_LOG_INTO_BLK 7
119 #define SCTP_BLOCK_LOG_OUTOF_BLK 8
120 #define SCTP_BLOCK_LOG_CHECK 9
121 #define SCTP_STR_LOG_FROM_INTO_STRD 10
122 #define SCTP_STR_LOG_FROM_IMMED_DEL 11
123 #define SCTP_STR_LOG_FROM_INSERT_HD 12
124 #define SCTP_STR_LOG_FROM_INSERT_MD 13
125 #define SCTP_STR_LOG_FROM_INSERT_TL 14
126 #define SCTP_STR_LOG_FROM_MARK_TSN 15
127 #define SCTP_STR_LOG_FROM_EXPRS_DEL 16
128 #define SCTP_FR_LOG_BIGGEST_TSNS 17
129 #define SCTP_FR_LOG_STRIKE_TEST 18
130 #define SCTP_FR_LOG_STRIKE_CHUNK 19
131 #define SCTP_FR_T3_TIMEOUT 20
132 #define SCTP_MAP_PREPARE_SLIDE 21
133 #define SCTP_MAP_SLIDE_FROM 22
134 #define SCTP_MAP_SLIDE_RESULT 23
135 #define SCTP_MAP_SLIDE_CLEARED 24
136 #define SCTP_MAP_SLIDE_NONE 25
137 #define SCTP_FR_T3_MARK_TIME 26
138 #define SCTP_FR_T3_MARKED 27
139 #define SCTP_FR_T3_STOPPED 28
140 #define SCTP_FR_MARKED 30
141 #define SCTP_CWND_LOG_NOADV_SS 31
142 #define SCTP_CWND_LOG_NOADV_CA 32
143 #define SCTP_MAX_BURST_APPLIED 33
144 #define SCTP_MAX_IFP_APPLIED 34
145 #define SCTP_MAX_BURST_ERROR_STOP 35
146 #define SCTP_INCREASE_PEER_RWND 36
147 #define SCTP_DECREASE_PEER_RWND 37
148 #define SCTP_SET_PEER_RWND_VIA_SACK 38
149 #define SCTP_LOG_MBCNT_INCREASE 39
150 #define SCTP_LOG_MBCNT_DECREASE 40
151 #define SCTP_LOG_MBCNT_CHKSET 41
152 #define SCTP_LOG_NEW_SACK 42
153 #define SCTP_LOG_TSN_ACKED 43
154 #define SCTP_LOG_TSN_REVOKED 44
155 #define SCTP_LOG_LOCK_TCB 45
156 #define SCTP_LOG_LOCK_INP 46
157 #define SCTP_LOG_LOCK_SOCK 47
158 #define SCTP_LOG_LOCK_SOCKBUF_R 48
159 #define SCTP_LOG_LOCK_SOCKBUF_S 49
160 #define SCTP_LOG_LOCK_CREATE 50
161 #define SCTP_LOG_INITIAL_RTT 51
162 #define SCTP_LOG_RTTVAR 52
163 #define SCTP_LOG_SBALLOC 53
164 #define SCTP_LOG_SBFREE 54
165 #define SCTP_LOG_SBRESULT 55
166 #define SCTP_FR_DUPED 56
167 #define SCTP_FR_MARKED_EARLY 57
168 #define SCTP_FR_CWND_REPORT 58
169 #define SCTP_FR_CWND_REPORT_START 59
170 #define SCTP_FR_CWND_REPORT_STOP 60
171 #define SCTP_CWND_LOG_FROM_SEND 61
172 #define SCTP_CWND_INITIALIZATION 62
173 #define SCTP_CWND_LOG_FROM_T3 63
174 #define SCTP_CWND_LOG_FROM_SACK 64
175 #define SCTP_CWND_LOG_NO_CUMACK 65
176 #define SCTP_CWND_LOG_FROM_RESEND 66
177 #define SCTP_FR_LOG_CHECK_STRIKE 67
178 #define SCTP_SEND_NOW_COMPLETES 68
179 #define SCTP_CWND_LOG_FILL_OUTQ_CALLED 69
180 #define SCTP_CWND_LOG_FILL_OUTQ_FILLS 70
181 #define SCTP_LOG_FREE_SENT 71
182 #define SCTP_NAGLE_APPLIED 72
183 #define SCTP_NAGLE_SKIPPED 73
184 #define SCTP_WAKESND_FROM_SACK 74
185 #define SCTP_WAKESND_FROM_FWDTSN 75
186 #define SCTP_NOWAKE_FROM_SACK 76
187 #define SCTP_CWNDLOG_PRESEND 77
188 #define SCTP_CWNDLOG_ENDSEND 78
189 #define SCTP_AT_END_OF_SACK 79
190 #define SCTP_REASON_FOR_SC 80
191 #define SCTP_BLOCK_LOG_INTO_BLKA 81
192 #define SCTP_ENTER_USER_RECV 82
193 #define SCTP_USER_RECV_SACKS 83
194 #define SCTP_SORECV_BLOCKSA 84
195 #define SCTP_SORECV_BLOCKSB 85
196 #define SCTP_SORECV_DONE 86
197 #define SCTP_SACK_RWND_UPDATE 87
198 #define SCTP_SORECV_ENTER 88
199 #define SCTP_SORECV_ENTERPL 89
200 #define SCTP_MBUF_INPUT 90
201 #define SCTP_MBUF_IALLOC 91
202 #define SCTP_MBUF_IFREE 92
203 #define SCTP_MBUF_ICOPY 93
204 #define SCTP_MBUF_SPLIT 94
205 #define SCTP_SORCV_FREECTL 95
206 #define SCTP_SORCV_DOESCPY 96
207 #define SCTP_SORCV_DOESLCK 97
208 #define SCTP_SORCV_DOESADJ 98
209 #define SCTP_SORCV_BOTWHILE 99
210 #define SCTP_SORCV_PASSBF 100
211 #define SCTP_SORCV_ADJD 101
212 #define SCTP_UNKNOWN_MAX 102
213 #define SCTP_RANDY_STUFF 103
214 #define SCTP_RANDY_STUFF1 104
215 #define SCTP_STRMOUT_LOG_ASSIGN 105
216 #define SCTP_STRMOUT_LOG_SEND 106
217 #define SCTP_FLIGHT_LOG_DOWN_CA 107
218 #define SCTP_FLIGHT_LOG_UP 108
219 #define SCTP_FLIGHT_LOG_DOWN_GAP 109
220 #define SCTP_FLIGHT_LOG_DOWN_RSND 110
221 #define SCTP_FLIGHT_LOG_UP_RSND 111
222 #define SCTP_FLIGHT_LOG_DOWN_RSND_TO 112
223 #define SCTP_FLIGHT_LOG_DOWN_WP 113
224 #define SCTP_FLIGHT_LOG_UP_REVOKE 114
225 #define SCTP_FLIGHT_LOG_DOWN_PDRP 115
226 #define SCTP_FLIGHT_LOG_DOWN_PMTU 116
227 #define SCTP_SACK_LOG_NORMAL 117
228 #define SCTP_SACK_LOG_EXPRESS 118
229 #define SCTP_MAP_TSN_ENTERS 119
230 #define SCTP_THRESHOLD_CLEAR 120
231 #define SCTP_THRESHOLD_INCR 121
232 #define SCTP_FLIGHT_LOG_DWN_WP_FWD 122
233 #define SCTP_FWD_TSN_CHECK 123
234 #define SCTP_LOG_MAX_TYPES 124
236 * To turn on various logging, you must first enable 'options KTR' and
237 * you might want to bump the entires 'options KTR_ENTRIES=80000'.
238 * To get something to log you define one of the logging defines.
241 * This gets the compile in place, but you still need to turn the
242 * logging flag on too in the sysctl (see in sctp.h).
245 #define SCTP_LOG_EVENT_UNKNOWN 0
246 #define SCTP_LOG_EVENT_CWND 1
247 #define SCTP_LOG_EVENT_BLOCK 2
248 #define SCTP_LOG_EVENT_STRM 3
249 #define SCTP_LOG_EVENT_FR 4
250 #define SCTP_LOG_EVENT_MAP 5
251 #define SCTP_LOG_EVENT_MAXBURST 6
252 #define SCTP_LOG_EVENT_RWND 7
253 #define SCTP_LOG_EVENT_MBCNT 8
254 #define SCTP_LOG_EVENT_SACK 9
255 #define SCTP_LOG_LOCK_EVENT 10
256 #define SCTP_LOG_EVENT_RTT 11
257 #define SCTP_LOG_EVENT_SB 12
258 #define SCTP_LOG_EVENT_NAGLE 13
259 #define SCTP_LOG_EVENT_WAKE 14
260 #define SCTP_LOG_MISC_EVENT 15
261 #define SCTP_LOG_EVENT_CLOSE 16
262 #define SCTP_LOG_EVENT_MBUF 17
263 #define SCTP_LOG_CHUNK_PROC 18
264 #define SCTP_LOG_ERROR_RET 19
266 #define SCTP_LOG_MAX_EVENT 20
268 #define SCTP_LOCK_UNKNOWN 2
271 /* number of associations by default for zone allocation */
272 #define SCTP_MAX_NUM_OF_ASOC 40000
273 /* how many addresses per assoc remote and local */
274 #define SCTP_SCALE_FOR_ADDR 2
276 /* default AUTO_ASCONF mode enable(1)/disable(0) value (sysctl) */
277 #define SCTP_DEFAULT_AUTO_ASCONF 1
279 /* default MULTIPLE_ASCONF mode enable(1)/disable(0) value (sysctl) */
280 #define SCTP_DEFAULT_MULTIPLE_ASCONFS 0
282 /* default MOBILITY_BASE mode enable(1)/disable(0) value (sysctl) */
283 #define SCTP_DEFAULT_MOBILITY_BASE 0
285 /* default MOBILITY_FASTHANDOFF mode enable(1)/disable(0) value (sysctl) */
286 #define SCTP_DEFAULT_MOBILITY_FASTHANDOFF 0
289 * Theshold for rwnd updates, we have to read (sb_hiwat >>
290 * SCTP_RWND_HIWAT_SHIFT) before we will look to see if we need to send a
291 * window update sack. When we look, we compare the last rwnd we sent vs the
292 * current rwnd. It too must be greater than this value. Using 3 divdes the
293 * hiwat by 8, so for 200k rwnd we need to read 24k. For a 64k rwnd we need
294 * to read 8k. This seems about right.. I hope :-D.. we do set a
295 * min of a MTU on it so if the rwnd is real small we will insist
296 * on a full MTU of 1500 bytes.
298 #define SCTP_RWND_HIWAT_SHIFT 3
300 /* How much of the rwnd must the
301 * message be taking up to start partial delivery.
302 * We calculate this by shifing the hi_water (recv_win)
303 * left the following .. set to 1, when a message holds
304 * 1/2 the rwnd. If we set it to 2 when a message holds
305 * 1/4 the rwnd...etc..
308 #define SCTP_PARTIAL_DELIVERY_SHIFT 1
311 * default HMAC for cookies, etc... use one of the AUTH HMAC id's
312 * SCTP_HMAC is the HMAC_ID to use
313 * SCTP_SIGNATURE_SIZE is the digest length
315 #define SCTP_HMAC SCTP_AUTH_HMAC_ID_SHA1
316 #define SCTP_SIGNATURE_SIZE SCTP_AUTH_DIGEST_LEN_SHA1
317 #define SCTP_SIGNATURE_ALOC_SIZE SCTP_SIGNATURE_SIZE
320 * the SCTP protocol signature this includes the version number encoded in
321 * the last 4 bits of the signature.
323 #define PROTO_SIGNATURE_A 0x30000000
324 #define SCTP_VERSION_NUMBER 0x3
326 #define MAX_TSN 0xffffffff
328 /* how many executions every N tick's */
329 #define SCTP_ITERATOR_MAX_AT_ONCE 20
331 /* number of clock ticks between iterator executions */
332 #define SCTP_ITERATOR_TICKS 1
335 * option: If you comment out the following you will receive the old behavior
336 * of obeying cwnd for the fast retransmit algorithm. With this defined a FR
337 * happens right away with-out waiting for the flightsize to drop below the
338 * cwnd value (which is reduced by the FR to 1/2 the inflight packets).
340 #define SCTP_IGNORE_CWND_ON_FR 1
343 * Adds implementors guide behavior to only use newest highest update in SACK
344 * gap ack's to figure out if you need to stroke a chunk for FR.
346 #define SCTP_NO_FR_UNLESS_SEGMENT_SMALLER 1
348 /* default max I can burst out after a fast retransmit, 0 disables it */
349 #define SCTP_DEF_MAX_BURST 4
350 #define SCTP_DEF_HBMAX_BURST 4
351 #define SCTP_DEF_FRMAX_BURST 4
353 /* RTO calculation flag to say if it
354 * is safe to determine local lan or not.
356 #define SCTP_RTT_FROM_NON_DATA 0
357 #define SCTP_RTT_FROM_DATA 1
360 /* IP hdr (20/40) + 12+2+2 (enet) + sctp common 12 */
361 #define SCTP_FIRST_MBUF_RESV 68
362 /* Packet transmit states in the sent field */
363 #define SCTP_DATAGRAM_UNSENT 0
364 #define SCTP_DATAGRAM_SENT 1
365 #define SCTP_DATAGRAM_RESEND1 2 /* not used (in code, but may
367 #define SCTP_DATAGRAM_RESEND2 3 /* not used (in code, but may
369 #define SCTP_DATAGRAM_RESEND 4
370 #define SCTP_DATAGRAM_ACKED 10010
371 #define SCTP_DATAGRAM_MARKED 20010
372 #define SCTP_FORWARD_TSN_SKIP 30010
373 #define SCTP_DATAGRAM_NR_ACKED 40010
375 /* chunk output send from locations */
376 #define SCTP_OUTPUT_FROM_USR_SEND 0
377 #define SCTP_OUTPUT_FROM_T3 1
378 #define SCTP_OUTPUT_FROM_INPUT_ERROR 2
379 #define SCTP_OUTPUT_FROM_CONTROL_PROC 3
380 #define SCTP_OUTPUT_FROM_SACK_TMR 4
381 #define SCTP_OUTPUT_FROM_SHUT_TMR 5
382 #define SCTP_OUTPUT_FROM_HB_TMR 6
383 #define SCTP_OUTPUT_FROM_SHUT_ACK_TMR 7
384 #define SCTP_OUTPUT_FROM_ASCONF_TMR 8
385 #define SCTP_OUTPUT_FROM_STRRST_TMR 9
386 #define SCTP_OUTPUT_FROM_AUTOCLOSE_TMR 10
387 #define SCTP_OUTPUT_FROM_EARLY_FR_TMR 11
388 #define SCTP_OUTPUT_FROM_STRRST_REQ 12
389 #define SCTP_OUTPUT_FROM_USR_RCVD 13
390 #define SCTP_OUTPUT_FROM_COOKIE_ACK 14
391 #define SCTP_OUTPUT_FROM_DRAIN 15
392 #define SCTP_OUTPUT_FROM_CLOSING 16
393 #define SCTP_OUTPUT_FROM_SOCKOPT 17
395 /* SCTP chunk types are moved sctp.h for application (NAT, FW) use */
397 /* align to 32-bit sizes */
398 #define SCTP_SIZE32(x) ((((x) + 3) >> 2) << 2)
400 #define IS_SCTP_CONTROL(a) ((a)->chunk_type != SCTP_DATA)
401 #define IS_SCTP_DATA(a) ((a)->chunk_type == SCTP_DATA)
404 /* SCTP parameter types */
405 /*************0x0000 series*************/
406 #define SCTP_HEARTBEAT_INFO 0x0001
407 #define SCTP_IPV4_ADDRESS 0x0005
408 #define SCTP_IPV6_ADDRESS 0x0006
409 #define SCTP_STATE_COOKIE 0x0007
410 #define SCTP_UNRECOG_PARAM 0x0008
411 #define SCTP_COOKIE_PRESERVE 0x0009
412 #define SCTP_HOSTNAME_ADDRESS 0x000b
413 #define SCTP_SUPPORTED_ADDRTYPE 0x000c
415 /* draft-ietf-stewart-tsvwg-strreset-xxx */
416 #define SCTP_STR_RESET_OUT_REQUEST 0x000d
417 #define SCTP_STR_RESET_IN_REQUEST 0x000e
418 #define SCTP_STR_RESET_TSN_REQUEST 0x000f
419 #define SCTP_STR_RESET_RESPONSE 0x0010
420 #define SCTP_STR_RESET_ADD_OUT_STREAMS 0x0011
421 #define SCTP_STR_RESET_ADD_IN_STREAMS 0x0012
423 #define SCTP_MAX_RESET_PARAMS 2
424 #define SCTP_STREAM_RESET_TSN_DELTA 0x1000
426 /*************0x4000 series*************/
428 /*************0x8000 series*************/
429 #define SCTP_ECN_CAPABLE 0x8000
431 /* draft-ietf-tsvwg-auth-xxx */
432 #define SCTP_RANDOM 0x8002
433 #define SCTP_CHUNK_LIST 0x8003
434 #define SCTP_HMAC_LIST 0x8004
436 * draft-ietf-tsvwg-addip-sctp-xx param=0x8008 len=0xNNNN Byte | Byte | Byte
437 * | Byte Byte | Byte ...
439 * Where each byte is a chunk type extension supported. For example, to support
440 * all chunks one would have (in hex):
442 * 80 01 00 09 C0 C1 80 81 82 00 00 00
444 * Has the parameter. C0 = PR-SCTP (RFC3758) C1, 80 = ASCONF (addip draft) 81
445 * = Packet Drop 82 = Stream Reset 83 = Authentication
447 #define SCTP_SUPPORTED_CHUNK_EXT 0x8008
449 /*************0xC000 series*************/
450 #define SCTP_PRSCTP_SUPPORTED 0xc000
451 /* draft-ietf-tsvwg-addip-sctp */
452 #define SCTP_ADD_IP_ADDRESS 0xc001
453 #define SCTP_DEL_IP_ADDRESS 0xc002
454 #define SCTP_ERROR_CAUSE_IND 0xc003
455 #define SCTP_SET_PRIM_ADDR 0xc004
456 #define SCTP_SUCCESS_REPORT 0xc005
457 #define SCTP_ULP_ADAPTATION 0xc006
458 /* behave-nat-draft */
459 #define SCTP_HAS_NAT_SUPPORT 0xc007
460 #define SCTP_NAT_VTAGS 0xc008
462 /* bits for TOS field */
463 #define SCTP_ECT0_BIT 0x02
464 #define SCTP_ECT1_BIT 0x01
465 #define SCTP_CE_BITS 0x03
467 /* below turns off above */
468 #define SCTP_FLEXIBLE_ADDRESS 0x20
469 #define SCTP_NO_HEARTBEAT 0x40
471 /* mask to get sticky */
472 #define SCTP_STICKY_OPTIONS_MASK 0x0c
476 * SCTP states for internal state machine XXX (should match "user" values)
478 #define SCTP_STATE_EMPTY 0x0000
479 #define SCTP_STATE_INUSE 0x0001
480 #define SCTP_STATE_COOKIE_WAIT 0x0002
481 #define SCTP_STATE_COOKIE_ECHOED 0x0004
482 #define SCTP_STATE_OPEN 0x0008
483 #define SCTP_STATE_SHUTDOWN_SENT 0x0010
484 #define SCTP_STATE_SHUTDOWN_RECEIVED 0x0020
485 #define SCTP_STATE_SHUTDOWN_ACK_SENT 0x0040
486 #define SCTP_STATE_SHUTDOWN_PENDING 0x0080
487 #define SCTP_STATE_CLOSED_SOCKET 0x0100
488 #define SCTP_STATE_ABOUT_TO_BE_FREED 0x0200
489 #define SCTP_STATE_PARTIAL_MSG_LEFT 0x0400
490 #define SCTP_STATE_WAS_ABORTED 0x0800
491 #define SCTP_STATE_IN_ACCEPT_QUEUE 0x1000
492 #define SCTP_STATE_MASK 0x007f
494 #define SCTP_GET_STATE(asoc) ((asoc)->state & SCTP_STATE_MASK)
495 #define SCTP_SET_STATE(asoc, newstate) ((asoc)->state = ((asoc)->state & ~SCTP_STATE_MASK) | newstate)
496 #define SCTP_CLEAR_SUBSTATE(asoc, substate) ((asoc)->state &= ~substate)
497 #define SCTP_ADD_SUBSTATE(asoc, substate) ((asoc)->state |= substate)
499 /* SCTP reachability state for each address */
500 #define SCTP_ADDR_REACHABLE 0x001
501 #define SCTP_ADDR_NO_PMTUD 0x002
502 #define SCTP_ADDR_NOHB 0x004
503 #define SCTP_ADDR_BEING_DELETED 0x008
504 #define SCTP_ADDR_NOT_IN_ASSOC 0x010
505 #define SCTP_ADDR_OUT_OF_SCOPE 0x080
506 #define SCTP_ADDR_UNCONFIRMED 0x200
507 #define SCTP_ADDR_REQ_PRIMARY 0x400
508 /* JRS 5/13/07 - Added potentially failed state for CMT PF */
509 #define SCTP_ADDR_PF 0x800
511 /* bound address types (e.g. valid address types to allow) */
512 #define SCTP_BOUND_V6 0x01
513 #define SCTP_BOUND_V4 0x02
516 * what is the default number of mbufs in a chain I allow before switching to
519 #define SCTP_DEFAULT_MBUFS_IN_CHAIN 5
521 /* How long a cookie lives in milli-seconds */
522 #define SCTP_DEFAULT_COOKIE_LIFE 60000
524 /* Maximum the mapping array will grow to (TSN mapping array) */
525 #define SCTP_MAPPING_ARRAY 512
527 /* size of the inital malloc on the mapping array */
528 #define SCTP_INITIAL_MAPPING_ARRAY 16
529 /* how much we grow the mapping array each call */
530 #define SCTP_MAPPING_ARRAY_INCR 32
533 * Here we define the timer types used by the implementation as arguments in
534 * the set/get timer type calls.
536 #define SCTP_TIMER_INIT 0
537 #define SCTP_TIMER_RECV 1
538 #define SCTP_TIMER_SEND 2
539 #define SCTP_TIMER_HEARTBEAT 3
540 #define SCTP_TIMER_PMTU 4
541 #define SCTP_TIMER_MAXSHUTDOWN 5
542 #define SCTP_TIMER_SIGNATURE 6
544 * number of timer types in the base SCTP structure used in the set/get and
545 * has the base default.
547 #define SCTP_NUM_TMRS 7
550 #define SCTP_TIMER_TYPE_NONE 0
551 #define SCTP_TIMER_TYPE_SEND 1
552 #define SCTP_TIMER_TYPE_INIT 2
553 #define SCTP_TIMER_TYPE_RECV 3
554 #define SCTP_TIMER_TYPE_SHUTDOWN 4
555 #define SCTP_TIMER_TYPE_HEARTBEAT 5
556 #define SCTP_TIMER_TYPE_COOKIE 6
557 #define SCTP_TIMER_TYPE_NEWCOOKIE 7
558 #define SCTP_TIMER_TYPE_PATHMTURAISE 8
559 #define SCTP_TIMER_TYPE_SHUTDOWNACK 9
560 #define SCTP_TIMER_TYPE_ASCONF 10
561 #define SCTP_TIMER_TYPE_SHUTDOWNGUARD 11
562 #define SCTP_TIMER_TYPE_AUTOCLOSE 12
563 #define SCTP_TIMER_TYPE_EVENTWAKE 13
564 #define SCTP_TIMER_TYPE_STRRESET 14
565 #define SCTP_TIMER_TYPE_INPKILL 15
566 #define SCTP_TIMER_TYPE_ASOCKILL 16
567 #define SCTP_TIMER_TYPE_ADDR_WQ 17
568 #define SCTP_TIMER_TYPE_ZERO_COPY 18
569 #define SCTP_TIMER_TYPE_ZCOPY_SENDQ 19
570 #define SCTP_TIMER_TYPE_PRIM_DELETED 20
571 /* add new timers here - and increment LAST */
572 #define SCTP_TIMER_TYPE_LAST 21
574 #define SCTP_IS_TIMER_TYPE_VALID(t) (((t) > SCTP_TIMER_TYPE_NONE) && \
575 ((t) < SCTP_TIMER_TYPE_LAST))
579 /* max number of TSN's dup'd that I will hold */
580 #define SCTP_MAX_DUP_TSNS 20
583 * Here we define the types used when setting the retry amounts.
585 /* How many drop re-attempts we make on INIT/COOKIE-ECHO */
586 #define SCTP_RETRY_DROPPED_THRESH 4
589 * Maxmium number of chunks a single association can have on it. Note that
590 * this is a squishy number since the count can run over this if the user
591 * sends a large message down .. the fragmented chunks don't count until
592 * AFTER the message is on queue.. it would be the next send that blocks
593 * things. This number will get tuned up at boot in the sctp_init and use the
594 * number of clusters as a base. This way high bandwidth environments will
595 * not get impacted by the lower bandwidth sending a bunch of 1 byte chunks
597 #define SCTP_ASOC_MAX_CHUNKS_ON_QUEUE 512
600 /* The conversion from time to ticks and vice versa is done by rounding
601 * upwards. This way we can test in the code the time to be positive and
602 * know that this corresponds to a positive number of ticks.
604 #define MSEC_TO_TICKS(x) ((hz == 1000) ? x : ((((x) * hz) + 999) / 1000))
605 #define TICKS_TO_MSEC(x) ((hz == 1000) ? x : ((((x) * 1000) + (hz - 1)) / hz))
607 #define SEC_TO_TICKS(x) ((x) * hz)
608 #define TICKS_TO_SEC(x) (((x) + (hz - 1)) / hz)
611 * Basically the minimum amount of time before I do a early FR. Making this
612 * value to low will cause duplicate retransmissions.
614 #define SCTP_MINFR_MSEC_TIMER 250
615 /* The floor this value is allowed to fall to when starting a timer. */
616 #define SCTP_MINFR_MSEC_FLOOR 20
618 /* init timer def = 1 sec */
619 #define SCTP_INIT_SEC 1
621 /* send timer def = 1 seconds */
622 #define SCTP_SEND_SEC 1
624 /* recv timer def = 200ms */
625 #define SCTP_RECV_MSEC 200
627 /* 30 seconds + RTO (in ms) */
628 #define SCTP_HB_DEFAULT_MSEC 30000
630 /* Max time I will wait for Shutdown to complete */
631 #define SCTP_DEF_MAX_SHUTDOWN_SEC 180
635 * This is how long a secret lives, NOT how long a cookie lives how many
636 * ticks the current secret will live.
638 #define SCTP_DEFAULT_SECRET_LIFE_SEC 3600
640 #define SCTP_RTO_UPPER_BOUND (60000) /* 60 sec in ms */
641 #define SCTP_RTO_LOWER_BOUND (1000) /* 1 sec is ms */
642 #define SCTP_RTO_INITIAL (3000) /* 3 sec in ms */
645 #define SCTP_INP_KILL_TIMEOUT 20/* number of ms to retry kill of inpcb */
646 #define SCTP_ASOC_KILL_TIMEOUT 10 /* number of ms to retry kill of inpcb */
648 #define SCTP_DEF_MAX_INIT 8
649 #define SCTP_DEF_MAX_SEND 10
650 #define SCTP_DEF_MAX_PATH_RTX 5
651 #define SCTP_DEF_PATH_PF_THRESHOLD SCTP_DEF_MAX_PATH_RTX
653 #define SCTP_DEF_PMTU_RAISE_SEC 600 /* 10 min between raise attempts */
656 /* How many streams I request initally by default */
657 #define SCTP_OSTREAM_INITIAL 10
658 #define SCTP_ISTREAM_INITIAL 2048
661 * How many smallest_mtu's need to increase before a window update sack is
662 * sent (should be a power of 2).
664 /* Send window update (incr * this > hiwat). Should be a power of 2 */
665 #define SCTP_MINIMAL_RWND (4096) /* minimal rwnd */
667 #define SCTP_ADDRMAX 16
669 /* SCTP DEBUG Switch parameters */
670 #define SCTP_DEBUG_TIMER1 0x00000001
671 #define SCTP_DEBUG_TIMER2 0x00000002 /* unused */
672 #define SCTP_DEBUG_TIMER3 0x00000004 /* unused */
673 #define SCTP_DEBUG_TIMER4 0x00000008
674 #define SCTP_DEBUG_OUTPUT1 0x00000010
675 #define SCTP_DEBUG_OUTPUT2 0x00000020
676 #define SCTP_DEBUG_OUTPUT3 0x00000040
677 #define SCTP_DEBUG_OUTPUT4 0x00000080
678 #define SCTP_DEBUG_UTIL1 0x00000100
679 #define SCTP_DEBUG_UTIL2 0x00000200 /* unused */
680 #define SCTP_DEBUG_AUTH1 0x00000400
681 #define SCTP_DEBUG_AUTH2 0x00000800 /* unused */
682 #define SCTP_DEBUG_INPUT1 0x00001000
683 #define SCTP_DEBUG_INPUT2 0x00002000
684 #define SCTP_DEBUG_INPUT3 0x00004000
685 #define SCTP_DEBUG_INPUT4 0x00008000 /* unused */
686 #define SCTP_DEBUG_ASCONF1 0x00010000
687 #define SCTP_DEBUG_ASCONF2 0x00020000
688 #define SCTP_DEBUG_OUTPUT5 0x00040000 /* unused */
689 #define SCTP_DEBUG_XXX 0x00080000 /* unused */
690 #define SCTP_DEBUG_PCB1 0x00100000
691 #define SCTP_DEBUG_PCB2 0x00200000 /* unused */
692 #define SCTP_DEBUG_PCB3 0x00400000
693 #define SCTP_DEBUG_PCB4 0x00800000
694 #define SCTP_DEBUG_INDATA1 0x01000000
695 #define SCTP_DEBUG_INDATA2 0x02000000 /* unused */
696 #define SCTP_DEBUG_INDATA3 0x04000000 /* unused */
697 #define SCTP_DEBUG_CRCOFFLOAD 0x08000000 /* unused */
698 #define SCTP_DEBUG_USRREQ1 0x10000000 /* unused */
699 #define SCTP_DEBUG_USRREQ2 0x20000000 /* unused */
700 #define SCTP_DEBUG_PEEL1 0x40000000
701 #define SCTP_DEBUG_XXXXX 0x80000000 /* unused */
702 #define SCTP_DEBUG_ALL 0x7ff3ffff
703 #define SCTP_DEBUG_NOISY 0x00040000
705 /* What sender needs to see to avoid SWS or we consider peers rwnd 0 */
706 #define SCTP_SWS_SENDER_DEF 1420
709 * SWS is scaled to the sb_hiwat of the socket. A value of 2 is hiwat/4, 1
710 * would be hiwat/2 etc.
712 /* What receiver needs to see in sockbuf or we tell peer its 1 */
713 #define SCTP_SWS_RECEIVER_DEF 3000
715 #define SCTP_INITIAL_CWND 4380
717 #define SCTP_DEFAULT_MTU 1500 /* emergency default MTU */
718 /* amount peer is obligated to have in rwnd or I will abort */
719 #define SCTP_MIN_RWND 1500
721 #define SCTP_DEFAULT_MAXSEGMENT 65535
723 #define SCTP_CHUNK_BUFFER_SIZE 512
724 #define SCTP_PARAM_BUFFER_SIZE 512
726 /* small chunk store for looking at chunk_list in auth */
727 #define SCTP_SMALL_CHUNK_STORE 260
729 #define SCTP_DEFAULT_MINSEGMENT 512 /* MTU size ... if no mtu disc */
730 #define SCTP_HOW_MANY_SECRETS 2 /* how many secrets I keep */
732 #define SCTP_NUMBER_OF_SECRETS 8 /* or 8 * 4 = 32 octets */
733 #define SCTP_SECRET_SIZE 32 /* number of octets in a 256 bits */
737 * SCTP upper layer notifications
739 #define SCTP_NOTIFY_ASSOC_UP 1
740 #define SCTP_NOTIFY_ASSOC_DOWN 2
741 #define SCTP_NOTIFY_INTERFACE_DOWN 3
742 #define SCTP_NOTIFY_INTERFACE_UP 4
743 #define SCTP_NOTIFY_SENT_DG_FAIL 5
744 #define SCTP_NOTIFY_UNSENT_DG_FAIL 6
745 #define SCTP_NOTIFY_SPECIAL_SP_FAIL 7
746 #define SCTP_NOTIFY_ASSOC_LOC_ABORTED 8
747 #define SCTP_NOTIFY_ASSOC_REM_ABORTED 9
748 #define SCTP_NOTIFY_ASSOC_RESTART 10
749 #define SCTP_NOTIFY_PEER_SHUTDOWN 11
750 #define SCTP_NOTIFY_ASCONF_ADD_IP 12
751 #define SCTP_NOTIFY_ASCONF_DELETE_IP 13
752 #define SCTP_NOTIFY_ASCONF_SET_PRIMARY 14
753 #define SCTP_NOTIFY_PARTIAL_DELVIERY_INDICATION 15
754 #define SCTP_NOTIFY_INTERFACE_CONFIRMED 16
755 #define SCTP_NOTIFY_STR_RESET_RECV 17
756 #define SCTP_NOTIFY_STR_RESET_SEND 18
757 #define SCTP_NOTIFY_STR_RESET_FAILED_OUT 19
758 #define SCTP_NOTIFY_STR_RESET_FAILED_IN 20
759 #define SCTP_NOTIFY_STR_RESET_DENIED_OUT 21
760 #define SCTP_NOTIFY_STR_RESET_DENIED_IN 22
761 #define SCTP_NOTIFY_AUTH_NEW_KEY 23
762 #define SCTP_NOTIFY_AUTH_FREE_KEY 24
763 #define SCTP_NOTIFY_NO_PEER_AUTH 25
764 #define SCTP_NOTIFY_SENDER_DRY 26
765 #define SCTP_NOTIFY_REMOTE_ERROR 27
767 /* This is the value for messages that are NOT completely
768 * copied down where we will start to split the message.
769 * So, with our default, we split only if the piece we
770 * want to take will fill up a full MTU (assuming
773 #define SCTP_DEFAULT_SPLIT_POINT_MIN 2904
775 /* ABORT CODES and other tell-tale location
776 * codes are generated by adding the below
777 * to the instance id.
781 #define SCTP_FROM_SCTP_INPUT 0x10000000
782 #define SCTP_FROM_SCTP_PCB 0x20000000
783 #define SCTP_FROM_SCTP_INDATA 0x30000000
784 #define SCTP_FROM_SCTP_TIMER 0x40000000
785 #define SCTP_FROM_SCTP_USRREQ 0x50000000
786 #define SCTP_FROM_SCTPUTIL 0x60000000
787 #define SCTP_FROM_SCTP6_USRREQ 0x70000000
788 #define SCTP_FROM_SCTP_ASCONF 0x80000000
789 #define SCTP_FROM_SCTP_OUTPUT 0x90000000
790 #define SCTP_FROM_SCTP_PEELOFF 0xa0000000
791 #define SCTP_FROM_SCTP_PANDA 0xb0000000
792 #define SCTP_FROM_SCTP_SYSCTL 0xc0000000
795 #define SCTP_LOC_1 0x00000001
796 #define SCTP_LOC_2 0x00000002
797 #define SCTP_LOC_3 0x00000003
798 #define SCTP_LOC_4 0x00000004
799 #define SCTP_LOC_5 0x00000005
800 #define SCTP_LOC_6 0x00000006
801 #define SCTP_LOC_7 0x00000007
802 #define SCTP_LOC_8 0x00000008
803 #define SCTP_LOC_9 0x00000009
804 #define SCTP_LOC_10 0x0000000a
805 #define SCTP_LOC_11 0x0000000b
806 #define SCTP_LOC_12 0x0000000c
807 #define SCTP_LOC_13 0x0000000d
808 #define SCTP_LOC_14 0x0000000e
809 #define SCTP_LOC_15 0x0000000f
810 #define SCTP_LOC_16 0x00000010
811 #define SCTP_LOC_17 0x00000011
812 #define SCTP_LOC_18 0x00000012
813 #define SCTP_LOC_19 0x00000013
814 #define SCTP_LOC_20 0x00000014
815 #define SCTP_LOC_21 0x00000015
816 #define SCTP_LOC_22 0x00000016
817 #define SCTP_LOC_23 0x00000017
818 #define SCTP_LOC_24 0x00000018
819 #define SCTP_LOC_25 0x00000019
820 #define SCTP_LOC_26 0x0000001a
821 #define SCTP_LOC_27 0x0000001b
822 #define SCTP_LOC_28 0x0000001c
823 #define SCTP_LOC_29 0x0000001d
824 #define SCTP_LOC_30 0x0000001e
825 #define SCTP_LOC_31 0x0000001f
826 #define SCTP_LOC_32 0x00000020
827 #define SCTP_LOC_33 0x00000021
830 /* Free assoc codes */
831 #define SCTP_NORMAL_PROC 0
832 #define SCTP_PCBFREE_NOFORCE 1
833 #define SCTP_PCBFREE_FORCE 2
835 /* From codes for adding addresses */
836 #define SCTP_ADDR_IS_CONFIRMED 8
837 #define SCTP_ADDR_DYNAMIC_ADDED 6
838 #define SCTP_IN_COOKIE_PROC 100
839 #define SCTP_ALLOC_ASOC 1
840 #define SCTP_LOAD_ADDR_2 2
841 #define SCTP_LOAD_ADDR_3 3
842 #define SCTP_LOAD_ADDR_4 4
843 #define SCTP_LOAD_ADDR_5 5
845 #define SCTP_DONOT_SETSCOPE 0
846 #define SCTP_DO_SETSCOPE 1
849 /* This value determines the default for when
850 * we try to add more on the send queue., if
851 * there is room. This prevents us from cycling
852 * into the copy_resume routine to often if
853 * we have not got enough space to add a decent
854 * enough size message. Note that if we have enough
855 * space to complete the message copy we will always
856 * add to the message, no matter what the size. Its
857 * only when we reach the point that we have some left
858 * to add, there is only room for part of it that we
859 * will use this threshold. Its also a sysctl.
861 #define SCTP_DEFAULT_ADD_MORE 1452
863 #ifndef SCTP_PCBHASHSIZE
864 /* default number of association hash buckets in each endpoint */
865 #define SCTP_PCBHASHSIZE 256
867 #ifndef SCTP_TCBHASHSIZE
868 #define SCTP_TCBHASHSIZE 1024
871 #ifndef SCTP_CHUNKQUEUE_SCALE
872 #define SCTP_CHUNKQUEUE_SCALE 10
875 /* clock variance is 1 ms */
876 #define SCTP_CLOCK_GRANULARITY 1
877 #define IP_HDR_SIZE 40 /* we use the size of a IP6 header here this
878 * detracts a small amount for ipv4 but it
879 * simplifies the ipv6 addition */
881 /* Argument magic number for sctp_inpcb_free() */
884 #define SCTP_CALLED_DIRECTLY_NOCMPSET 0
885 #define SCTP_CALLED_AFTER_CMPSET_OFCLOSE 1
886 #define SCTP_CALLED_FROM_INPKILL_TIMER 2
887 /* second argument */
888 #define SCTP_FREE_SHOULD_USE_ABORT 1
889 #define SCTP_FREE_SHOULD_USE_GRACEFUL_CLOSE 0
892 #define IPPROTO_SCTP 132 /* the Official IANA number :-) */
893 #endif /* !IPPROTO_SCTP */
895 #define SCTP_MAX_DATA_BUNDLING 256
897 /* modular comparison */
898 /* See RFC 1982 for details. */
899 #define SCTP_SSN_GT(a, b) (((a < b) && ((uint16_t)(b - a) > (1U<<15))) || \
900 ((a > b) && ((uint16_t)(a - b) < (1U<<15))))
901 #define SCTP_SSN_GE(a, b) (SCTP_SSN_GT(a, b) || (a == b))
902 #define SCTP_TSN_GT(a, b) (((a < b) && ((uint32_t)(b - a) > (1U<<31))) || \
903 ((a > b) && ((uint32_t)(a - b) < (1U<<31))))
904 #define SCTP_TSN_GE(a, b) (SCTP_TSN_GT(a, b) || (a == b))
906 /* Mapping array manipulation routines */
907 #define SCTP_IS_TSN_PRESENT(arry, gap) ((arry[(gap >> 3)] >> (gap & 0x07)) & 0x01)
908 #define SCTP_SET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] |= (0x01 << ((gap & 0x07))))
909 #define SCTP_UNSET_TSN_PRESENT(arry, gap) (arry[(gap >> 3)] &= ((~(0x01 << ((gap & 0x07)))) & 0xff))
910 #define SCTP_CALC_TSN_TO_GAP(gap, tsn, mapping_tsn) do { \
911 if (tsn >= mapping_tsn) { \
912 gap = tsn - mapping_tsn; \
914 gap = (MAX_TSN - mapping_tsn) + tsn + 1; \
919 #define SCTP_RETRAN_DONE -1
920 #define SCTP_RETRAN_EXIT -2
923 * This value defines the number of vtag block time wait entry's per list
924 * element. Each entry will take 2 4 byte ints (and of course the overhead
925 * of the next pointer as well). Using 15 as an example will yield * ((8 *
926 * 15) + 8) or 128 bytes of overhead for each timewait block that gets
927 * initialized. Increasing it to 31 would yeild 256 bytes per block.
929 #define SCTP_NUMBER_IN_VTAG_BLOCK 15
931 * If we use the STACK option, we have an array of this size head pointers.
932 * This array is mod'd the with the size to find which bucket and then all
933 * entries must be searched to see if the tag is in timed wait. If so we
936 #define SCTP_STACK_VTAG_HASH_SIZE 32
939 * Number of seconds of time wait for a vtag.
941 #define SCTP_TIME_WAIT 60
943 /* How many micro seconds is the cutoff from
944 * local lan type rtt's
947 * We allow 900us for the rtt.
949 #define SCTP_LOCAL_LAN_RTT 900
950 #define SCTP_LAN_UNKNOWN 0
951 #define SCTP_LAN_LOCAL 1
952 #define SCTP_LAN_INTERNET 2
954 #define SCTP_SEND_BUFFER_SPLITTING 0x00000001
955 #define SCTP_RECV_BUFFER_SPLITTING 0x00000002
957 /* The system retains a cache of free chunks such to
958 * cut down on calls the memory allocation system. There
959 * is a per association limit of free items and a overall
960 * system limit. If either one gets hit then the resource
961 * stops being cached.
964 #define SCTP_DEF_ASOC_RESC_LIMIT 10
965 #define SCTP_DEF_SYSTEM_RESC_LIMIT 1000
968 * defines for socket lock states.
969 * Used by __APPLE__ and SCTP_SO_LOCK_TESTING
971 #define SCTP_SO_LOCKED 1
972 #define SCTP_SO_NOT_LOCKED 0
975 #define SCTP_HOLDS_LOCK 1
976 #define SCTP_NOT_LOCKED 0
979 * For address locks, do we hold the lock?
981 #define SCTP_ADDR_LOCKED 1
982 #define SCTP_ADDR_NOT_LOCKED 0
984 #define IN4_ISPRIVATE_ADDRESS(a) \
985 ((((uint8_t *)&(a)->s_addr)[0] == 10) || \
986 ((((uint8_t *)&(a)->s_addr)[0] == 172) && \
987 (((uint8_t *)&(a)->s_addr)[1] >= 16) && \
988 (((uint8_t *)&(a)->s_addr)[1] <= 32)) || \
989 ((((uint8_t *)&(a)->s_addr)[0] == 192) && \
990 (((uint8_t *)&(a)->s_addr)[1] == 168)))
992 #define IN4_ISLOOPBACK_ADDRESS(a) \
993 ((((uint8_t *)&(a)->s_addr)[0] == 127) && \
994 (((uint8_t *)&(a)->s_addr)[1] == 0) && \
995 (((uint8_t *)&(a)->s_addr)[2] == 0) && \
996 (((uint8_t *)&(a)->s_addr)[3] == 1))
998 #define IN4_ISLINKLOCAL_ADDRESS(a) \
999 ((((uint8_t *)&(a)->s_addr)[0] == 169) && \
1000 (((uint8_t *)&(a)->s_addr)[1] == 254))
1003 #if defined(_KERNEL)
1004 #define SCTP_GETTIME_TIMEVAL(x) (getmicrouptime(x))
1005 #define SCTP_GETPTIME_TIMEVAL(x) (microuptime(x))
1008 #if defined(_KERNEL) || defined(__Userspace__)
1009 #define sctp_sowwakeup(inp, so) \
1011 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1012 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \
1018 #define sctp_sowwakeup_locked(inp, so) \
1020 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1021 SOCKBUF_UNLOCK(&((so)->so_snd)); \
1022 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEOUTPUT; \
1024 sowwakeup_locked(so); \
1028 #define sctp_sorwakeup(inp, so) \
1030 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1031 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \
1037 #define sctp_sorwakeup_locked(inp, so) \
1039 if (inp->sctp_flags & SCTP_PCB_FLAGS_DONT_WAKE) { \
1040 inp->sctp_flags |= SCTP_PCB_FLAGS_WAKEINPUT; \
1041 SOCKBUF_UNLOCK(&((so)->so_rcv)); \
1043 sorwakeup_locked(so); \
1047 #endif /* _KERNEL || __Userspace__ */