2 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3 * Copyright (c) 2010-2011 Juniper Networks, Inc.
6 * Portions of this software were developed by Robert N. M. Watson under
7 * contract to Juniper Networks, Inc.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the project nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * $KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $
34 * $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $
38 * Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
39 * The Regents of the University of California.
40 * All rights reserved.
42 * Redistribution and use in source and binary forms, with or without
43 * modification, are permitted provided that the following conditions
45 * 1. Redistributions of source code must retain the above copyright
46 * notice, this list of conditions and the following disclaimer.
47 * 2. Redistributions in binary form must reproduce the above copyright
48 * notice, this list of conditions and the following disclaimer in the
49 * documentation and/or other materials provided with the distribution.
50 * 4. Neither the name of the University nor the names of its contributors
51 * may be used to endorse or promote products derived from this software
52 * without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
66 * @(#)udp_usrreq.c 8.6 (Berkeley) 5/23/95
69 #include <sys/cdefs.h>
70 __FBSDID("$FreeBSD$");
73 #include "opt_inet6.h"
75 #include "opt_ipsec.h"
77 #include <sys/param.h>
79 #include <sys/kernel.h>
84 #include <sys/protosw.h>
85 #include <sys/signalvar.h>
86 #include <sys/socket.h>
87 #include <sys/socketvar.h>
89 #include <sys/sysctl.h>
90 #include <sys/syslog.h>
91 #include <sys/systm.h>
94 #include <net/if_types.h>
95 #include <net/route.h>
97 #include <netinet/in.h>
98 #include <netinet/in_pcb.h>
99 #include <netinet/in_systm.h>
100 #include <netinet/in_var.h>
101 #include <netinet/ip.h>
102 #include <netinet/ip_icmp.h>
103 #include <netinet/ip6.h>
104 #include <netinet/icmp_var.h>
105 #include <netinet/icmp6.h>
106 #include <netinet/ip_var.h>
107 #include <netinet/udp.h>
108 #include <netinet/udp_var.h>
110 #include <netinet6/ip6protosw.h>
111 #include <netinet6/ip6_var.h>
112 #include <netinet6/in6_pcb.h>
113 #include <netinet6/udp6_var.h>
114 #include <netinet6/scope6_var.h>
117 #include <netipsec/ipsec.h>
118 #include <netipsec/ipsec6.h>
121 #include <security/mac/mac_framework.h>
124 * UDP protocol implementation.
125 * Per RFC 768, August, 1980.
128 extern struct protosw inetsw[];
129 static void udp6_detach(struct socket *so);
132 udp6_append(struct inpcb *inp, struct mbuf *n, int off,
133 struct sockaddr_in6 *fromsa)
138 INP_LOCK_ASSERT(inp);
141 /* Check AH/ESP integrity. */
142 if (ipsec6_in_reject(n, inp)) {
144 IPSEC6STAT_INC(in_polvio);
149 if (mac_inpcb_check_deliver(inp, n) != 0) {
155 if (inp->inp_flags & INP_CONTROLOPTS ||
156 inp->inp_socket->so_options & SO_TIMESTAMP)
157 ip6_savecontrol(inp, n, &opts);
158 m_adj(n, off + sizeof(struct udphdr));
160 so = inp->inp_socket;
161 SOCKBUF_LOCK(&so->so_rcv);
162 if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n,
164 SOCKBUF_UNLOCK(&so->so_rcv);
168 UDPSTAT_INC(udps_fullsock);
170 sorwakeup_locked(so);
174 udp6_input(struct mbuf **mp, int *offp, int proto)
176 struct mbuf *m = *mp;
184 struct sockaddr_in6 fromsa;
185 struct m_tag *fwd_tag;
188 ifp = m->m_pkthdr.rcvif;
189 ip6 = mtod(m, struct ip6_hdr *);
191 if (faithprefix_p != NULL && (*faithprefix_p)(&ip6->ip6_dst)) {
192 /* XXX send icmp6 host/port unreach? */
194 return (IPPROTO_DONE);
197 #ifndef PULLDOWN_TEST
198 IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
199 ip6 = mtod(m, struct ip6_hdr *);
200 uh = (struct udphdr *)((caddr_t)ip6 + off);
202 IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh));
204 return (IPPROTO_DONE);
207 UDPSTAT_INC(udps_ipackets);
210 * Destination port of 0 is illegal, based on RFC768.
212 if (uh->uh_dport == 0)
215 plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
216 ulen = ntohs((u_short)uh->uh_ulen);
219 UDPSTAT_INC(udps_badlen);
224 * Checksum extended UDP header and data.
226 if (uh->uh_sum == 0) {
227 UDPSTAT_INC(udps_nosum);
231 if (m->m_pkthdr.csum_flags & CSUM_DATA_VALID_IPV6) {
232 if (m->m_pkthdr.csum_flags & CSUM_PSEUDO_HDR)
233 uh_sum = m->m_pkthdr.csum_data;
235 uh_sum = in6_cksum_pseudo(ip6, ulen,
236 IPPROTO_UDP, m->m_pkthdr.csum_data);
239 uh_sum = in6_cksum(m, IPPROTO_UDP, off, ulen);
242 UDPSTAT_INC(udps_badsum);
247 * Construct sockaddr format source address.
249 init_sin6(&fromsa, m);
250 fromsa.sin6_port = uh->uh_sport;
252 if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
254 struct ip6_moptions *imo;
256 INP_INFO_RLOCK(&V_udbinfo);
258 * In the event that laddr should be set to the link-local
259 * address (this happens in RIPng), the multicast address
260 * specified in the received packet will not match laddr. To
261 * handle this situation, matching is relaxed if the
262 * receiving interface is the same as one specified in the
263 * socket and if the destination multicast address matches
264 * one of the multicast groups specified in the socket.
268 * KAME note: traditionally we dropped udpiphdr from mbuf
269 * here. We need udphdr for IPsec processing so we do that
273 LIST_FOREACH(inp, &V_udb, inp_list) {
274 if ((inp->inp_vflag & INP_IPV6) == 0)
276 if (inp->inp_lport != uh->uh_dport)
278 if (inp->inp_fport != 0 &&
279 inp->inp_fport != uh->uh_sport)
281 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
282 if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
286 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
287 if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
289 inp->inp_fport != uh->uh_sport)
294 * XXXRW: Because we weren't holding either the inpcb
295 * or the hash lock when we checked for a match
296 * before, we should probably recheck now that the
297 * inpcb lock is (supposed to be) held.
301 * Handle socket delivery policy for any-source
302 * and source-specific multicast. [RFC3678]
304 imo = inp->in6p_moptions;
305 if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
306 struct sockaddr_in6 mcaddr;
311 bzero(&mcaddr, sizeof(struct sockaddr_in6));
312 mcaddr.sin6_len = sizeof(struct sockaddr_in6);
313 mcaddr.sin6_family = AF_INET6;
314 mcaddr.sin6_addr = ip6->ip6_dst;
316 blocked = im6o_mc_filter(imo, ifp,
317 (struct sockaddr *)&mcaddr,
318 (struct sockaddr *)&fromsa);
319 if (blocked != MCAST_PASS) {
320 if (blocked == MCAST_NOTGMEMBER)
321 IP6STAT_INC(ip6s_notmember);
322 if (blocked == MCAST_NOTSMEMBER ||
323 blocked == MCAST_MUTED)
324 UDPSTAT_INC(udps_filtermcast);
325 INP_RUNLOCK(inp); /* XXX */
334 if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
336 up = intoudpcb(last);
337 if (up->u_tun_func == NULL) {
338 udp6_append(last, n, off, &fromsa);
341 * Engage the tunneling
342 * protocol we will have to
343 * leave the info_lock up,
344 * since we are hunting
345 * through multiple UDP's.
348 (*up->u_tun_func)(n, off, last);
355 * Don't look for additional matches if this one does
356 * not have either the SO_REUSEPORT or SO_REUSEADDR
357 * socket options set. This heuristic avoids
358 * searching through all pcbs in the common case of a
359 * non-shared port. It assumes that an application
360 * will never clear these options after setting them.
362 if ((last->inp_socket->so_options &
363 (SO_REUSEPORT|SO_REUSEADDR)) == 0)
369 * No matching pcb found; discard datagram. (No need
370 * to send an ICMP Port Unreachable for a broadcast
371 * or multicast datgram.)
373 UDPSTAT_INC(udps_noport);
374 UDPSTAT_INC(udps_noportmcast);
378 INP_INFO_RUNLOCK(&V_udbinfo);
379 up = intoudpcb(last);
380 if (up->u_tun_func == NULL) {
381 udp6_append(last, m, off, &fromsa);
384 * Engage the tunneling protocol.
386 (*up->u_tun_func)(m, off, last);
389 return (IPPROTO_DONE);
392 * Locate pcb for datagram.
396 * Grab info from PACKET_TAG_IPFORWARD tag prepended to the chain.
398 if ((m->m_flags & M_IP6_NEXTHOP) &&
399 (fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL)) != NULL) {
400 struct sockaddr_in6 *next_hop6;
402 next_hop6 = (struct sockaddr_in6 *)(fwd_tag + 1);
405 * Transparently forwarded. Pretend to be the destination.
406 * Already got one like this?
408 inp = in6_pcblookup_mbuf(&V_udbinfo,
409 &ip6->ip6_src, uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
410 INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif, m);
413 * It's new. Try to find the ambushing socket.
414 * Because we've rewritten the destination address,
415 * any hardware-generated hash is ignored.
417 inp = in6_pcblookup(&V_udbinfo, &ip6->ip6_src,
418 uh->uh_sport, &next_hop6->sin6_addr,
419 next_hop6->sin6_port ? htons(next_hop6->sin6_port) :
420 uh->uh_dport, INPLOOKUP_WILDCARD |
421 INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif);
423 /* Remove the tag from the packet. We don't need it anymore. */
424 m_tag_delete(m, fwd_tag);
425 m->m_flags &= ~M_IP6_NEXTHOP;
427 inp = in6_pcblookup_mbuf(&V_udbinfo, &ip6->ip6_src,
428 uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
429 INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB,
430 m->m_pkthdr.rcvif, m);
432 if (udp_log_in_vain) {
433 char ip6bufs[INET6_ADDRSTRLEN];
434 char ip6bufd[INET6_ADDRSTRLEN];
437 "Connection attempt to UDP [%s]:%d from [%s]:%d\n",
438 ip6_sprintf(ip6bufd, &ip6->ip6_dst),
440 ip6_sprintf(ip6bufs, &ip6->ip6_src),
441 ntohs(uh->uh_sport));
443 UDPSTAT_INC(udps_noport);
444 if (m->m_flags & M_MCAST) {
445 printf("UDP6: M_MCAST is set in a unicast packet.\n");
446 UDPSTAT_INC(udps_noportmcast);
451 if (badport_bandlim(BANDLIM_ICMP6_UNREACH) < 0)
453 icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
454 return (IPPROTO_DONE);
456 INP_RLOCK_ASSERT(inp);
458 if (up->u_tun_func == NULL) {
459 udp6_append(inp, m, off, &fromsa);
462 * Engage the tunneling protocol.
465 (*up->u_tun_func)(m, off, inp);
468 return (IPPROTO_DONE);
471 INP_INFO_RUNLOCK(&V_udbinfo);
475 return (IPPROTO_DONE);
479 udp6_ctlinput(int cmd, struct sockaddr *sa, void *d)
485 struct ip6ctlparam *ip6cp = NULL;
486 const struct sockaddr_in6 *sa6_src = NULL;
488 struct inpcb *(*notify)(struct inpcb *, int) = udp_notify;
489 struct udp_portonly {
494 if (sa->sa_family != AF_INET6 ||
495 sa->sa_len != sizeof(struct sockaddr_in6))
498 if ((unsigned)cmd >= PRC_NCMDS)
500 if (PRC_IS_REDIRECT(cmd))
501 notify = in6_rtchange, d = NULL;
502 else if (cmd == PRC_HOSTDEAD)
504 else if (inet6ctlerrmap[cmd] == 0)
507 /* if the parameter is from icmp6, decode it. */
509 ip6cp = (struct ip6ctlparam *)d;
511 ip6 = ip6cp->ip6c_ip6;
512 off = ip6cp->ip6c_off;
513 cmdarg = ip6cp->ip6c_cmdarg;
514 sa6_src = ip6cp->ip6c_src;
524 * XXX: We assume that when IPV6 is non NULL,
525 * M and OFF are valid.
528 /* Check if we can safely examine src and dst ports. */
529 if (m->m_pkthdr.len < off + sizeof(*uhp))
532 bzero(&uh, sizeof(uh));
533 m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
535 (void) in6_pcbnotify(&V_udbinfo, sa, uh.uh_dport,
536 (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd,
539 (void) in6_pcbnotify(&V_udbinfo, sa, 0,
540 (const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
544 udp6_getcred(SYSCTL_HANDLER_ARGS)
547 struct sockaddr_in6 addrs[2];
551 error = priv_check(req->td, PRIV_NETINET_GETCRED);
555 if (req->newlen != sizeof(addrs))
557 if (req->oldlen != sizeof(struct xucred))
559 error = SYSCTL_IN(req, addrs, sizeof(addrs));
562 if ((error = sa6_embedscope(&addrs[0], V_ip6_use_defzone)) != 0 ||
563 (error = sa6_embedscope(&addrs[1], V_ip6_use_defzone)) != 0) {
566 inp = in6_pcblookup(&V_udbinfo, &addrs[1].sin6_addr,
567 addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port,
568 INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, NULL);
570 INP_RLOCK_ASSERT(inp);
571 if (inp->inp_socket == NULL)
574 error = cr_canseesocket(req->td->td_ucred,
577 cru2x(inp->inp_cred, &xuc);
582 error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
586 SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0,
587 0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection");
590 udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6,
591 struct mbuf *control, struct thread *td)
593 u_int32_t ulen = m->m_pkthdr.len;
594 u_int32_t plen = sizeof(struct udphdr) + ulen;
597 struct in6_addr *laddr, *faddr, in6a;
598 struct sockaddr_in6 *sin6 = NULL;
599 struct ifnet *oifp = NULL;
600 int scope_ambiguous = 0;
603 struct ip6_pktopts *optp, opt;
604 int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
606 struct sockaddr_in6 tmp;
608 INP_WLOCK_ASSERT(inp);
609 INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);
612 /* addr6 has been validated in udp6_send(). */
613 sin6 = (struct sockaddr_in6 *)addr6;
615 /* protect *sin6 from overwrites */
620 * Application should provide a proper zone ID or the use of
621 * default zone IDs should be enabled. Unfortunately, some
622 * applications do not behave as it should, so we need a
623 * workaround. Even if an appropriate ID is not determined,
624 * we'll see if we can determine the outgoing interface. If we
625 * can, determine the zone ID based on the interface below.
627 if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
629 if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
634 if ((error = ip6_setpktopts(control, &opt,
635 inp->in6p_outputopts, td->td_ucred, IPPROTO_UDP)) != 0)
639 optp = inp->in6p_outputopts;
642 faddr = &sin6->sin6_addr;
645 * IPv4 version of udp_output calls in_pcbconnect in this case,
646 * which needs splnet and affects performance.
647 * Since we saw no essential reason for calling in_pcbconnect,
648 * we get rid of such kind of logic, and call in6_selectsrc
649 * and in6_pcbsetport in order to fill in the local address
650 * and the local port.
652 if (sin6->sin6_port == 0) {
653 error = EADDRNOTAVAIL;
657 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
658 /* how about ::ffff:0.0.0.0 case? */
663 fport = sin6->sin6_port; /* allow 0 port */
665 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
666 if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
668 * I believe we should explicitly discard the
669 * packet when mapped addresses are disabled,
670 * rather than send the packet as an IPv6 one.
671 * If we chose the latter approach, the packet
672 * might be sent out on the wire based on the
673 * default route, the situation which we'd
674 * probably want to avoid.
675 * (20010421 jinmei@kame.net)
680 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
681 !IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
683 * when remote addr is an IPv4-mapped address,
684 * local addr should not be an IPv6 address,
685 * since you cannot determine how to map IPv6
686 * source address to IPv4.
695 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
696 error = in6_selectsrc(sin6, optp, inp, NULL,
697 td->td_ucred, &oifp, &in6a);
700 if (oifp && scope_ambiguous &&
701 (error = in6_setscope(&sin6->sin6_addr,
707 laddr = &inp->in6p_laddr; /* XXX */
710 error = EADDRNOTAVAIL;
713 if (inp->inp_lport == 0 &&
714 (error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0) {
715 /* Undo an address bind that may have occurred. */
716 inp->in6p_laddr = in6addr_any;
720 if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
724 if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) {
725 if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
727 * XXX: this case would happen when the
728 * application sets the V6ONLY flag after
729 * connecting the foreign address.
730 * Such applications should be fixed,
733 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
734 "option was set for a connected socket\n");
740 laddr = &inp->in6p_laddr;
741 faddr = &inp->in6p_faddr;
742 fport = inp->inp_fport;
746 hlen = sizeof(struct ip);
749 * Calculate data length and get a mbuf
750 * for UDP and IP6 headers.
752 M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT);
759 * Stuff checksum and output datagram.
761 udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
762 udp6->uh_sport = inp->inp_lport; /* lport is always set in the PCB */
763 udp6->uh_dport = fport;
765 udp6->uh_ulen = htons((u_short)plen);
772 ip6 = mtod(m, struct ip6_hdr *);
773 ip6->ip6_flow = inp->inp_flow & IPV6_FLOWINFO_MASK;
774 ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
775 ip6->ip6_vfc |= IPV6_VERSION;
776 #if 0 /* ip6_plen will be filled in ip6_output. */
777 ip6->ip6_plen = htons((u_short)plen);
779 ip6->ip6_nxt = IPPROTO_UDP;
780 ip6->ip6_hlim = in6_selecthlim(inp, NULL);
781 ip6->ip6_src = *laddr;
782 ip6->ip6_dst = *faddr;
784 udp6->uh_sum = in6_cksum_pseudo(ip6, plen, IPPROTO_UDP, 0);
785 m->m_pkthdr.csum_flags = CSUM_UDP_IPV6;
786 m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum);
790 UDPSTAT_INC(udps_opackets);
791 error = ip6_output(m, optp, NULL, flags, inp->in6p_moptions,
795 error = EAFNOSUPPORT;
805 ip6_clearpktopts(&opt, -1);
812 udp6_abort(struct socket *so)
817 KASSERT(inp != NULL, ("udp6_abort: inp == NULL"));
820 if (inp->inp_vflag & INP_IPV4) {
821 struct pr_usrreqs *pru;
823 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
824 (*pru->pru_abort)(so);
830 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
831 INP_HASH_WLOCK(&V_udbinfo);
832 in6_pcbdisconnect(inp);
833 inp->in6p_laddr = in6addr_any;
834 INP_HASH_WUNLOCK(&V_udbinfo);
835 soisdisconnected(so);
841 udp6_attach(struct socket *so, int proto, struct thread *td)
847 KASSERT(inp == NULL, ("udp6_attach: inp != NULL"));
849 if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
850 error = soreserve(so, udp_sendspace, udp_recvspace);
854 INP_INFO_WLOCK(&V_udbinfo);
855 error = in_pcballoc(so, &V_udbinfo);
857 INP_INFO_WUNLOCK(&V_udbinfo);
860 inp = (struct inpcb *)so->so_pcb;
861 inp->inp_vflag |= INP_IPV6;
862 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0)
863 inp->inp_vflag |= INP_IPV4;
864 inp->in6p_hops = -1; /* use kernel default */
865 inp->in6p_cksum = -1; /* just to be sure */
868 * IPv4 TTL initialization is necessary for an IPv6 socket as well,
869 * because the socket may be bound to an IPv6 wildcard address,
870 * which may match an IPv4-mapped IPv6 address.
872 inp->inp_ip_ttl = V_ip_defttl;
874 error = udp_newudpcb(inp);
878 INP_INFO_WUNLOCK(&V_udbinfo);
882 INP_INFO_WUNLOCK(&V_udbinfo);
887 udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
893 KASSERT(inp != NULL, ("udp6_bind: inp == NULL"));
896 INP_HASH_WLOCK(&V_udbinfo);
897 inp->inp_vflag &= ~INP_IPV4;
898 inp->inp_vflag |= INP_IPV6;
899 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
900 struct sockaddr_in6 *sin6_p;
902 sin6_p = (struct sockaddr_in6 *)nam;
904 if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
905 inp->inp_vflag |= INP_IPV4;
907 else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
908 struct sockaddr_in sin;
910 in6_sin6_2_sin(&sin, sin6_p);
911 inp->inp_vflag |= INP_IPV4;
912 inp->inp_vflag &= ~INP_IPV6;
913 error = in_pcbbind(inp, (struct sockaddr *)&sin,
920 error = in6_pcbbind(inp, nam, td->td_ucred);
924 INP_HASH_WUNLOCK(&V_udbinfo);
930 udp6_close(struct socket *so)
935 KASSERT(inp != NULL, ("udp6_close: inp == NULL"));
938 if (inp->inp_vflag & INP_IPV4) {
939 struct pr_usrreqs *pru;
941 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
942 (*pru->pru_disconnect)(so);
947 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
948 INP_HASH_WLOCK(&V_udbinfo);
949 in6_pcbdisconnect(inp);
950 inp->in6p_laddr = in6addr_any;
951 INP_HASH_WUNLOCK(&V_udbinfo);
952 soisdisconnected(so);
958 udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
961 struct sockaddr_in6 *sin6;
965 sin6 = (struct sockaddr_in6 *)nam;
966 KASSERT(inp != NULL, ("udp6_connect: inp == NULL"));
969 * XXXRW: Need to clarify locking of v4/v6 flags.
973 if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
974 struct sockaddr_in sin;
976 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0) {
980 if (inp->inp_faddr.s_addr != INADDR_ANY) {
984 in6_sin6_2_sin(&sin, sin6);
985 inp->inp_vflag |= INP_IPV4;
986 inp->inp_vflag &= ~INP_IPV6;
987 error = prison_remote_ip4(td->td_ucred, &sin.sin_addr);
990 INP_HASH_WLOCK(&V_udbinfo);
991 error = in_pcbconnect(inp, (struct sockaddr *)&sin,
993 INP_HASH_WUNLOCK(&V_udbinfo);
999 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1003 inp->inp_vflag &= ~INP_IPV4;
1004 inp->inp_vflag |= INP_IPV6;
1005 error = prison_remote_ip6(td->td_ucred, &sin6->sin6_addr);
1008 INP_HASH_WLOCK(&V_udbinfo);
1009 error = in6_pcbconnect(inp, nam, td->td_ucred);
1010 INP_HASH_WUNLOCK(&V_udbinfo);
1019 udp6_detach(struct socket *so)
1024 inp = sotoinpcb(so);
1025 KASSERT(inp != NULL, ("udp6_detach: inp == NULL"));
1027 INP_INFO_WLOCK(&V_udbinfo);
1029 up = intoudpcb(inp);
1030 KASSERT(up != NULL, ("%s: up == NULL", __func__));
1033 INP_INFO_WUNLOCK(&V_udbinfo);
1038 udp6_disconnect(struct socket *so)
1043 inp = sotoinpcb(so);
1044 KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL"));
1047 if (inp->inp_vflag & INP_IPV4) {
1048 struct pr_usrreqs *pru;
1050 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1051 (void)(*pru->pru_disconnect)(so);
1058 if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1063 INP_HASH_WLOCK(&V_udbinfo);
1064 in6_pcbdisconnect(inp);
1065 inp->in6p_laddr = in6addr_any;
1066 INP_HASH_WUNLOCK(&V_udbinfo);
1068 so->so_state &= ~SS_ISCONNECTED; /* XXX */
1076 udp6_send(struct socket *so, int flags, struct mbuf *m,
1077 struct sockaddr *addr, struct mbuf *control, struct thread *td)
1082 inp = sotoinpcb(so);
1083 KASSERT(inp != NULL, ("udp6_send: inp == NULL"));
1087 if (addr->sa_len != sizeof(struct sockaddr_in6)) {
1091 if (addr->sa_family != AF_INET6) {
1092 error = EAFNOSUPPORT;
1098 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
1100 struct sockaddr_in6 *sin6 = 0;
1103 hasv4addr = (inp->inp_vflag & INP_IPV4);
1105 sin6 = (struct sockaddr_in6 *)addr;
1106 hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)
1110 struct pr_usrreqs *pru;
1113 * XXXRW: We release UDP-layer locks before calling
1114 * udp_send() in order to avoid recursion. However,
1115 * this does mean there is a short window where inp's
1116 * fields are unstable. Could this lead to a
1117 * potential race in which the factors causing us to
1118 * select the UDPv4 output routine are invalidated?
1122 in6_sin6_2_sin_in_sock(addr);
1123 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1124 /* addr will just be freed in sendit(). */
1125 return ((*pru->pru_send)(so, flags, m, addr, control,
1131 mac_inpcb_create_mbuf(inp, m);
1133 INP_HASH_WLOCK(&V_udbinfo);
1134 error = udp6_output(inp, m, addr, control, td);
1135 INP_HASH_WUNLOCK(&V_udbinfo);
1147 struct pr_usrreqs udp6_usrreqs = {
1148 .pru_abort = udp6_abort,
1149 .pru_attach = udp6_attach,
1150 .pru_bind = udp6_bind,
1151 .pru_connect = udp6_connect,
1152 .pru_control = in6_control,
1153 .pru_detach = udp6_detach,
1154 .pru_disconnect = udp6_disconnect,
1155 .pru_peeraddr = in6_mapped_peeraddr,
1156 .pru_send = udp6_send,
1157 .pru_shutdown = udp_shutdown,
1158 .pru_sockaddr = in6_mapped_sockaddr,
1159 .pru_soreceive = soreceive_dgram,
1160 .pru_sosend = sosend_dgram,
1161 .pru_sosetlabel = in_pcbsosetlabel,
1162 .pru_close = udp6_close