2 * Copyright (c) 1999, 2000 Matthew R. Green
3 * Copyright (c) 2001 - 2003 by Thomas Moestl <tmm@FreeBSD.org>
4 * Copyright (c) 2005 - 2006 Marius Strobl <marius@FreeBSD.org>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The name of the author may not be used to endorse or promote products
16 * derived from this software without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
24 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
25 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * from: NetBSD: psycho.c,v 1.39 2001/10/07 20:30:41 eeh Exp
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
37 * Support for `Hummingbird' (UltraSPARC IIe), `Psycho' and `Psycho+'
38 * (UltraSPARC II) and `Sabre' (UltraSPARC IIi) UPA to PCI bridges.
41 #include "opt_ofw_pci.h"
42 #include "opt_psycho.h"
44 #include <sys/param.h>
45 #include <sys/systm.h>
47 #include <sys/endian.h>
49 #include <sys/kernel.h>
51 #include <sys/malloc.h>
52 #include <sys/module.h>
53 #include <sys/mutex.h>
55 #include <sys/reboot.h>
57 #include <sys/sysctl.h>
59 #include <dev/ofw/ofw_bus.h>
60 #include <dev/ofw/ofw_pci.h>
61 #include <dev/ofw/openfirm.h>
63 #include <machine/bus.h>
64 #include <machine/bus_common.h>
65 #include <machine/bus_private.h>
66 #include <machine/iommureg.h>
67 #include <machine/iommuvar.h>
68 #include <machine/resource.h>
69 #include <machine/ver.h>
71 #include <dev/pci/pcireg.h>
72 #include <dev/pci/pcivar.h>
74 #include <sparc64/pci/ofw_pci.h>
75 #include <sparc64/pci/psychoreg.h>
76 #include <sparc64/pci/psychovar.h>
80 static const struct psycho_desc *psycho_find_desc(const struct psycho_desc *,
82 static const struct psycho_desc *psycho_get_desc(device_t);
83 static void psycho_set_intr(struct psycho_softc *, u_int, bus_addr_t,
84 driver_filter_t, driver_intr_t);
85 static int psycho_find_intrmap(struct psycho_softc *, u_int, bus_addr_t *,
86 bus_addr_t *, u_long *);
87 static void sabre_dmamap_sync(bus_dma_tag_t dt, bus_dmamap_t map,
89 static void psycho_intr_enable(void *);
90 static void psycho_intr_disable(void *);
91 static void psycho_intr_assign(void *);
92 static void psycho_intr_clear(void *);
94 /* Interrupt handlers */
95 static driver_filter_t psycho_ue;
96 static driver_filter_t psycho_ce;
97 static driver_filter_t psycho_pci_bus;
98 static driver_filter_t psycho_powerdebug;
99 static driver_intr_t psycho_powerdown;
100 static driver_intr_t psycho_overtemp;
101 #ifdef PSYCHO_MAP_WAKEUP
102 static driver_filter_t psycho_wakeup;
106 static void psycho_iommu_init(struct psycho_softc *, int, uint32_t);
111 static device_probe_t psycho_probe;
112 static device_attach_t psycho_attach;
113 static bus_read_ivar_t psycho_read_ivar;
114 static bus_setup_intr_t psycho_setup_intr;
115 static bus_alloc_resource_t psycho_alloc_resource;
116 static bus_activate_resource_t psycho_activate_resource;
117 static bus_adjust_resource_t psycho_adjust_resource;
118 static bus_get_dma_tag_t psycho_get_dma_tag;
119 static pcib_maxslots_t psycho_maxslots;
120 static pcib_read_config_t psycho_read_config;
121 static pcib_write_config_t psycho_write_config;
122 static pcib_route_interrupt_t psycho_route_interrupt;
123 static ofw_bus_get_node_t psycho_get_node;
124 static ofw_pci_setup_device_t psycho_setup_device;
126 static device_method_t psycho_methods[] = {
127 /* Device interface */
128 DEVMETHOD(device_probe, psycho_probe),
129 DEVMETHOD(device_attach, psycho_attach),
130 DEVMETHOD(device_shutdown, bus_generic_shutdown),
131 DEVMETHOD(device_suspend, bus_generic_suspend),
132 DEVMETHOD(device_resume, bus_generic_resume),
135 DEVMETHOD(bus_read_ivar, psycho_read_ivar),
136 DEVMETHOD(bus_setup_intr, psycho_setup_intr),
137 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
138 DEVMETHOD(bus_alloc_resource, psycho_alloc_resource),
139 DEVMETHOD(bus_activate_resource, psycho_activate_resource),
140 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
141 DEVMETHOD(bus_adjust_resource, psycho_adjust_resource),
142 DEVMETHOD(bus_release_resource, bus_generic_release_resource),
143 DEVMETHOD(bus_get_dma_tag, psycho_get_dma_tag),
146 DEVMETHOD(pcib_maxslots, psycho_maxslots),
147 DEVMETHOD(pcib_read_config, psycho_read_config),
148 DEVMETHOD(pcib_write_config, psycho_write_config),
149 DEVMETHOD(pcib_route_interrupt, psycho_route_interrupt),
151 /* ofw_bus interface */
152 DEVMETHOD(ofw_bus_get_node, psycho_get_node),
154 /* ofw_pci interface */
155 DEVMETHOD(ofw_pci_setup_device, psycho_setup_device),
160 static devclass_t psycho_devclass;
162 DEFINE_CLASS_0(pcib, psycho_driver, psycho_methods,
163 sizeof(struct psycho_softc));
164 EARLY_DRIVER_MODULE(psycho, nexus, psycho_driver, psycho_devclass, NULL, NULL,
167 static SYSCTL_NODE(_hw, OID_AUTO, psycho, CTLFLAG_RD, 0, "psycho parameters");
169 static u_int psycho_powerfail = 1;
170 TUNABLE_INT("hw.psycho.powerfail", &psycho_powerfail);
171 SYSCTL_UINT(_hw_psycho, OID_AUTO, powerfail, CTLFLAG_RDTUN, &psycho_powerfail,
172 0, "powerfail action (0: none, 1: shutdown (default), 2: debugger)");
174 static SLIST_HEAD(, psycho_softc) psycho_softcs =
175 SLIST_HEAD_INITIALIZER(psycho_softcs);
177 static const struct intr_controller psycho_ic = {
184 struct psycho_icarg {
185 struct psycho_softc *pica_sc;
190 #define PSYCHO_READ8(sc, off) \
191 bus_read_8((sc)->sc_mem_res, (off))
192 #define PSYCHO_WRITE8(sc, off, v) \
193 bus_write_8((sc)->sc_mem_res, (off), (v))
194 #define PCICTL_READ8(sc, off) \
195 PSYCHO_READ8((sc), (sc)->sc_pcictl + (off))
196 #define PCICTL_WRITE8(sc, off, v) \
197 PSYCHO_WRITE8((sc), (sc)->sc_pcictl + (off), (v))
200 * "Sabre" is the UltraSPARC IIi onboard UPA to PCI bridge. It manages a
201 * single PCI bus and does not have a streaming buffer. It often has an APB
202 * (advanced PCI bridge) connected to it, which was designed specifically for
203 * the IIi. The APB let's the IIi handle two independednt PCI buses, and
204 * appears as two "Simba"'s underneath the Sabre.
206 * "Hummingbird" is the UltraSPARC IIe onboard UPA to PCI bridge. It's
207 * basically the same as Sabre but without an APB underneath it.
209 * "Psycho" and "Psycho+" are dual UPA to PCI bridges. They sit on the UPA
210 * bus and manage two PCI buses. "Psycho" has two 64-bit 33MHz buses, while
211 * "Psycho+" controls both a 64-bit 33Mhz and a 64-bit 66Mhz PCI bus. You
212 * will usually find a "Psycho+" since I don't think the original "Psycho"
213 * ever shipped, and if it did it would be in the U30.
215 * Each "Psycho" PCI bus appears as a separate OFW node, but since they are
216 * both part of the same IC, they only have a single register space. As such,
217 * they need to be configured together, even though the autoconfiguration will
218 * attach them separately.
220 * On UltraIIi machines, "Sabre" itself usually takes pci0, with "Simba" often
221 * as pci1 and pci2, although they have been implemented with other PCI bus
222 * numbers on some machines.
224 * On UltraII machines, there can be any number of "Psycho+" ICs, each
225 * providing two PCI buses.
229 const char *pd_string;
234 static const struct psycho_desc psycho_compats[] = {
235 { "pci108e,8000", PSYCHO_MODE_PSYCHO, "Psycho compatible" },
236 { "pci108e,a000", PSYCHO_MODE_SABRE, "Sabre compatible" },
237 { "pci108e,a001", PSYCHO_MODE_SABRE, "Hummingbird compatible" },
241 static const struct psycho_desc psycho_models[] = {
242 { "SUNW,psycho", PSYCHO_MODE_PSYCHO, "Psycho" },
243 { "SUNW,sabre", PSYCHO_MODE_SABRE, "Sabre" },
247 static const struct psycho_desc *
248 psycho_find_desc(const struct psycho_desc *table, const char *string)
250 const struct psycho_desc *desc;
254 for (desc = table; desc->pd_string != NULL; desc++)
255 if (strcmp(desc->pd_string, string) == 0)
260 static const struct psycho_desc *
261 psycho_get_desc(device_t dev)
263 const struct psycho_desc *rv;
265 rv = psycho_find_desc(psycho_models, ofw_bus_get_model(dev));
267 rv = psycho_find_desc(psycho_compats,
268 ofw_bus_get_compat(dev));
273 psycho_probe(device_t dev)
277 dtype = ofw_bus_get_type(dev);
278 if (dtype != NULL && strcmp(dtype, OFW_TYPE_PCI) == 0 &&
279 psycho_get_desc(dev) != NULL) {
280 device_set_desc(dev, "U2P UPA-PCI bridge");
287 psycho_attach(device_t dev)
289 struct psycho_icarg *pica;
290 struct psycho_softc *asc, *sc, *osc;
291 struct ofw_pci_ranges *range;
292 const struct psycho_desc *desc;
293 bus_addr_t intrclr, intrmap;
296 uint32_t dvmabase, prop, prop_array[2];
300 node = ofw_bus_get_node(dev);
301 sc = device_get_softc(dev);
302 desc = psycho_get_desc(dev);
306 sc->sc_mode = desc->pd_mode;
309 * The Psycho gets three register banks:
310 * (0) per-PBM configuration and status registers
311 * (1) per-PBM PCI configuration space, containing only the
312 * PBM 256-byte PCI header
313 * (2) the shared Psycho configuration registers
315 if (sc->sc_mode == PSYCHO_MODE_PSYCHO) {
318 bus_get_resource_start(dev, SYS_RES_MEMORY, 0) -
319 bus_get_resource_start(dev, SYS_RES_MEMORY, 2);
320 switch (sc->sc_pcictl) {
328 panic("%s: bogus PCI control register location",
334 sc->sc_pcictl = PSR_PCICTL0;
337 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i,
338 (sc->sc_mode == PSYCHO_MODE_PSYCHO ? RF_SHAREABLE : 0) |
340 if (sc->sc_mem_res == NULL)
341 panic("%s: could not allocate registers", __func__);
344 * Match other Psychos that are already configured against
345 * the base physical address. This will be the same for a
346 * pair of devices that share register space.
349 SLIST_FOREACH(asc, &psycho_softcs, sc_link) {
350 if (rman_get_start(asc->sc_mem_res) ==
351 rman_get_start(sc->sc_mem_res)) {
358 sc->sc_mtx = malloc(sizeof(*sc->sc_mtx), M_DEVBUF,
360 if (sc->sc_mtx == NULL)
361 panic("%s: could not malloc mutex", __func__);
362 mtx_init(sc->sc_mtx, "pcib_mtx", NULL, MTX_SPIN);
364 if (sc->sc_mode != PSYCHO_MODE_PSYCHO)
365 panic("%s: no partner expected", __func__);
366 if (mtx_initialized(osc->sc_mtx) == 0)
367 panic("%s: mutex not initialized", __func__);
368 sc->sc_mtx = osc->sc_mtx;
371 csr = PSYCHO_READ8(sc, PSR_CS);
372 ver = PSYCHO_GCSR_VERS(csr);
373 sc->sc_ign = 0x1f; /* Hummingbird/Sabre IGN is always 0x1f. */
374 if (sc->sc_mode == PSYCHO_MODE_PSYCHO)
375 sc->sc_ign = PSYCHO_GCSR_IGN(csr);
376 if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1)
380 "%s, impl %d, version %d, IGN %#x, bus %c, %dMHz\n",
381 desc->pd_name, (u_int)PSYCHO_GCSR_IMPL(csr), ver, sc->sc_ign,
382 'A' + sc->sc_half, prop / 1000 / 1000);
384 /* Set up the PCI control and PCI diagnostic registers. */
386 csr = PCICTL_READ8(sc, PCR_CS);
387 csr &= ~PCICTL_ARB_PARK;
388 if (OF_getproplen(node, "no-bus-parking") < 0)
389 csr |= PCICTL_ARB_PARK;
391 /* Workarounds for version specific bugs. */
392 dr = PCICTL_READ8(sc, PCR_DIAG);
396 dr &= ~DIAG_DWSYNC_DIS;
400 csr &= ~PCICTL_ARB_PARK;
401 dr |= DIAG_RTRY_DIS | DIAG_DWSYNC_DIS;
405 dr |= DIAG_DWSYNC_DIS;
406 dr &= ~DIAG_RTRY_DIS;
411 csr |= PCICTL_ERRINTEN | PCICTL_ARB_4;
412 csr &= ~(PCICTL_SBHINTEN | PCICTL_WAKEUPEN);
414 device_printf(dev, "PCI CSR 0x%016llx -> 0x%016llx\n",
415 (unsigned long long)PCICTL_READ8(sc, PCR_CS),
416 (unsigned long long)csr);
418 PCICTL_WRITE8(sc, PCR_CS, csr);
420 dr &= ~DIAG_ISYNC_DIS;
422 device_printf(dev, "PCI DR 0x%016llx -> 0x%016llx\n",
423 (unsigned long long)PCICTL_READ8(sc, PCR_DIAG),
424 (unsigned long long)dr);
426 PCICTL_WRITE8(sc, PCR_DIAG, dr);
428 if (sc->sc_mode == PSYCHO_MODE_SABRE) {
429 /* Use the PROM preset for now. */
430 csr = PCICTL_READ8(sc, PCR_TAS);
432 panic("%s: Hummingbird/Sabre TAS not initialized.",
434 dvmabase = (ffs(csr) - 1) << PCITAS_ADDR_SHIFT;
438 /* Initialize memory and I/O rmans. */
439 sc->sc_pci_io_rman.rm_type = RMAN_ARRAY;
440 sc->sc_pci_io_rman.rm_descr = "Psycho PCI I/O Ports";
441 if (rman_init(&sc->sc_pci_io_rman) != 0 ||
442 rman_manage_region(&sc->sc_pci_io_rman, 0, PSYCHO_IO_SIZE) != 0)
443 panic("%s: failed to set up I/O rman", __func__);
444 sc->sc_pci_mem_rman.rm_type = RMAN_ARRAY;
445 sc->sc_pci_mem_rman.rm_descr = "Psycho PCI Memory";
446 if (rman_init(&sc->sc_pci_mem_rman) != 0 ||
447 rman_manage_region(&sc->sc_pci_mem_rman, 0, PSYCHO_MEM_SIZE) != 0)
448 panic("%s: failed to set up memory rman", __func__);
450 i = OF_getprop_alloc(node, "ranges", sizeof(*range), (void **)&range);
452 * Make sure that the expected ranges are present. The
453 * OFW_PCI_CS_MEM64 one is not currently used though.
455 if (i != PSYCHO_NRANGE)
456 panic("%s: unsupported number of ranges", __func__);
458 * Find the addresses of the various bus spaces.
459 * There should not be multiple ones of one kind.
460 * The physical start addresses of the ranges are the configuration,
461 * memory and I/O handles.
463 for (i = 0; i < PSYCHO_NRANGE; i++) {
464 j = OFW_PCI_RANGE_CS(&range[i]);
465 if (sc->sc_pci_bh[j] != 0)
466 panic("%s: duplicate range for space %d",
468 sc->sc_pci_bh[j] = OFW_PCI_RANGE_PHYS(&range[i]);
470 free(range, M_OFWPROP);
472 /* Register the softc, this is needed for paired Psychos. */
473 SLIST_INSERT_HEAD(&psycho_softcs, sc, sc_link);
476 * If we're a Hummingbird/Sabre or the first of a pair of Psychos
477 * to arrive here, do the interrupt setup and start up the IOMMU.
481 * Hunt through all the interrupt mapping regs and register
482 * our interrupt controller for the corresponding interrupt
483 * vectors. We do this early in order to be able to catch
486 for (i = 0; i <= PSYCHO_MAX_INO; i++) {
487 if (psycho_find_intrmap(sc, i, &intrmap, &intrclr,
490 pica = malloc(sizeof(*pica), M_DEVBUF, M_NOWAIT);
492 panic("%s: could not allocate interrupt "
493 "controller argument", __func__);
495 pica->pica_map = intrmap;
496 pica->pica_clr = intrclr;
499 * Enable all interrupts and clear all interrupt
500 * states. This aids the debugging of interrupt
504 "intr map (INO %d, %s) %#lx: %#lx, clr: %#lx\n",
505 i, intrmap <= PSR_PCIB3_INT_MAP ? "PCI" : "OBIO",
506 (u_long)intrmap, (u_long)PSYCHO_READ8(sc,
507 intrmap), (u_long)intrclr);
508 PSYCHO_WRITE8(sc, intrmap, INTMAP_VEC(sc->sc_ign, i));
509 PSYCHO_WRITE8(sc, intrclr, INTCLR_IDLE);
510 PSYCHO_WRITE8(sc, intrmap,
511 INTMAP_ENABLE(INTMAP_VEC(sc->sc_ign, i),
514 j = intr_controller_register(INTMAP_VEC(sc->sc_ign,
515 i), &psycho_ic, pica);
517 device_printf(dev, "could not register "
518 "interrupt controller for INO %d (%d)\n",
522 if (sc->sc_mode == PSYCHO_MODE_PSYCHO)
523 sparc64_counter_init(device_get_nameunit(dev),
524 rman_get_bustag(sc->sc_mem_res),
525 rman_get_bushandle(sc->sc_mem_res), PSR_TC0);
528 * Set up IOMMU and PCI configuration if we're the first
529 * of a pair of Psychos to arrive here or a Hummingbird
532 * We should calculate a TSB size based on amount of RAM
533 * and number of bus controllers and number and type of
536 * For the moment, 32KB should be more than enough.
538 sc->sc_is = malloc(sizeof(*sc->sc_is), M_DEVBUF, M_NOWAIT |
540 if (sc->sc_is == NULL)
541 panic("%s: could not malloc IOMMU state", __func__);
542 sc->sc_is->is_flags = IOMMU_PRESERVE_PROM;
543 if (sc->sc_mode == PSYCHO_MODE_SABRE) {
545 malloc(sizeof(*sc->sc_dma_methods), M_DEVBUF,
547 if (sc->sc_dma_methods == NULL)
548 panic("%s: could not malloc DMA methods",
550 memcpy(sc->sc_dma_methods, &iommu_dma_methods,
551 sizeof(*sc->sc_dma_methods));
552 sc->sc_dma_methods->dm_dmamap_sync =
554 sc->sc_is->is_pmaxaddr =
555 IOMMU_MAXADDR(SABRE_IOMMU_BITS);
557 sc->sc_dma_methods = &iommu_dma_methods;
558 sc->sc_is->is_pmaxaddr =
559 IOMMU_MAXADDR(PSYCHO_IOMMU_BITS);
561 sc->sc_is->is_sb[0] = sc->sc_is->is_sb[1] = 0;
562 if (OF_getproplen(node, "no-streaming-cache") < 0)
563 sc->sc_is->is_sb[0] = sc->sc_pcictl + PCR_STRBUF;
564 sc->sc_is->is_flags |= (rerun != 1) ? IOMMU_RERUN_DISABLE : 0;
565 psycho_iommu_init(sc, 3, dvmabase);
567 /* Just copy IOMMU state, config tag and address. */
568 sc->sc_dma_methods = &iommu_dma_methods;
569 sc->sc_is = osc->sc_is;
570 if (OF_getproplen(node, "no-streaming-cache") < 0)
571 sc->sc_is->is_sb[1] = sc->sc_pcictl + PCR_STRBUF;
572 iommu_reset(sc->sc_is);
575 /* Allocate our tags. */
576 sc->sc_pci_iot = sparc64_alloc_bus_tag(NULL, rman_get_bustag(
577 sc->sc_mem_res), PCI_IO_BUS_SPACE, NULL);
578 if (sc->sc_pci_iot == NULL)
579 panic("%s: could not allocate PCI I/O tag", __func__);
580 sc->sc_pci_cfgt = sparc64_alloc_bus_tag(NULL, rman_get_bustag(
581 sc->sc_mem_res), PCI_CONFIG_BUS_SPACE, NULL);
582 if (sc->sc_pci_cfgt == NULL)
583 panic("%s: could not allocate PCI configuration space tag",
585 if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0,
586 sc->sc_is->is_pmaxaddr, ~0, NULL, NULL, sc->sc_is->is_pmaxaddr,
587 0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_pci_dmat) != 0)
588 panic("%s: could not create PCI DMA tag", __func__);
589 /* Customize the tag. */
590 sc->sc_pci_dmat->dt_cookie = sc->sc_is;
591 sc->sc_pci_dmat->dt_mt = sc->sc_dma_methods;
593 i = OF_getprop(node, "bus-range", (void *)prop_array,
596 panic("%s: could not get bus-range", __func__);
597 if (i != sizeof(prop_array))
598 panic("%s: broken bus-range (%d)", __func__, i);
599 sc->sc_pci_secbus = prop_array[0];
600 sc->sc_pci_subbus = prop_array[1];
602 device_printf(dev, "bus range %u to %u; PCI bus %d\n",
603 sc->sc_pci_secbus, sc->sc_pci_subbus, sc->sc_pci_secbus);
605 /* Clear any pending PCI error bits. */
606 PCIB_WRITE_CONFIG(dev, sc->sc_pci_secbus, PCS_DEVICE, PCS_FUNC,
607 PCIR_STATUS, PCIB_READ_CONFIG(dev, sc->sc_pci_secbus,
608 PCS_DEVICE, PCS_FUNC, PCIR_STATUS, 2), 2);
609 PCICTL_WRITE8(sc, PCR_CS, PCICTL_READ8(sc, PCR_CS));
610 PCICTL_WRITE8(sc, PCR_AFS, PCICTL_READ8(sc, PCR_AFS));
614 * Establish handlers for interesting interrupts...
616 * XXX We need to remember these and remove this to support
617 * hotplug on the UPA/FHC bus.
619 * XXX Not all controllers have these, but installing them
620 * is better than trying to sort through this mess.
622 psycho_set_intr(sc, 1, PSR_UE_INT_MAP, psycho_ue, NULL);
623 psycho_set_intr(sc, 2, PSR_CE_INT_MAP, psycho_ce, NULL);
624 switch (psycho_powerfail) {
628 psycho_set_intr(sc, 3, PSR_POWER_INT_MAP,
629 psycho_powerdebug, NULL);
632 psycho_set_intr(sc, 3, PSR_POWER_INT_MAP, NULL,
636 if (sc->sc_mode == PSYCHO_MODE_PSYCHO) {
638 * Hummingbirds/Sabres do not have the following two
643 * The spare hardware interrupt is used for the
644 * over-temperature interrupt.
646 psycho_set_intr(sc, 4, PSR_SPARE_INT_MAP, NULL,
648 #ifdef PSYCHO_MAP_WAKEUP
650 * psycho_wakeup() doesn't do anything useful right
653 psycho_set_intr(sc, 5, PSR_PWRMGT_INT_MAP,
654 psycho_wakeup, NULL);
655 #endif /* PSYCHO_MAP_WAKEUP */
659 * Register a PCI bus error interrupt handler according to which
660 * half this is. Hummingbird/Sabre don't have a PCI bus B error
661 * interrupt but they are also only used for PCI bus A.
663 psycho_set_intr(sc, 0, sc->sc_half == 0 ? PSR_PCIAERR_INT_MAP :
664 PSR_PCIBERR_INT_MAP, psycho_pci_bus, NULL);
667 * Set the latency timer register as this isn't always done by the
670 PCIB_WRITE_CONFIG(dev, sc->sc_pci_secbus, PCS_DEVICE, PCS_FUNC,
671 PCIR_LATTIMER, OFW_PCI_LATENCY, 1);
673 for (i = PCIR_VENDOR; i < PCIR_STATUS; i += sizeof(uint16_t))
674 le16enc(&sc->sc_pci_hpbcfg[i], bus_space_read_2(
675 sc->sc_pci_cfgt, sc->sc_pci_bh[OFW_PCI_CS_CONFIG],
676 PSYCHO_CONF_OFF(sc->sc_pci_secbus, PCS_DEVICE,
678 for (i = PCIR_REVID; i <= PCIR_BIST; i += sizeof(uint8_t))
679 sc->sc_pci_hpbcfg[i] = bus_space_read_1(sc->sc_pci_cfgt,
680 sc->sc_pci_bh[OFW_PCI_CS_CONFIG], PSYCHO_CONF_OFF(
681 sc->sc_pci_secbus, PCS_DEVICE, PCS_FUNC, i));
683 ofw_bus_setup_iinfo(node, &sc->sc_pci_iinfo, sizeof(ofw_pci_intr_t));
685 * On E250 the interrupt map entry for the EBus bridge is wrong,
686 * causing incorrect interrupts to be assigned to some devices on
687 * the EBus. Work around it by changing our copy of the interrupt
688 * map mask to perform a full comparison of the INO. That way
689 * the interrupt map entry for the EBus bridge won't match at all
690 * and the INOs specified in the "interrupts" properties of the
691 * EBus devices will be used directly instead.
693 if (strcmp(sparc64_model, "SUNW,Ultra-250") == 0 &&
694 sc->sc_pci_iinfo.opi_imapmsk != NULL)
695 *(ofw_pci_intr_t *)(&sc->sc_pci_iinfo.opi_imapmsk[
696 sc->sc_pci_iinfo.opi_addrc]) = INTMAP_INO_MASK;
698 device_add_child(dev, "pci", -1);
699 return (bus_generic_attach(dev));
703 psycho_set_intr(struct psycho_softc *sc, u_int index, bus_addr_t intrmap,
704 driver_filter_t filt, driver_intr_t intr)
710 sc->sc_irq_res[index] = bus_alloc_resource_any(sc->sc_dev,
711 SYS_RES_IRQ, &rid, RF_ACTIVE);
712 if (sc->sc_irq_res[index] == NULL && intrmap >= PSR_POWER_INT_MAP) {
714 * These interrupts aren't mandatory and not available
715 * with all controllers (not even Psychos).
719 if (sc->sc_irq_res[index] == NULL ||
720 INTIGN(vec = rman_get_start(sc->sc_irq_res[index])) !=
722 INTVEC(PSYCHO_READ8(sc, intrmap)) != vec ||
723 intr_vectors[vec].iv_ic != &psycho_ic ||
724 bus_setup_intr(sc->sc_dev, sc->sc_irq_res[index],
725 INTR_TYPE_MISC | INTR_BRIDGE, filt, intr, sc,
726 &sc->sc_ihand[index]) != 0)
727 panic("%s: failed to set up interrupt %d", __func__, index);
731 psycho_find_intrmap(struct psycho_softc *sc, u_int ino,
732 bus_addr_t *intrmapptr, bus_addr_t *intrclrptr, bus_addr_t *intrdiagptr)
734 bus_addr_t intrclr, intrmap;
739 * XXX we only compare INOs rather than INRs since the firmware may
740 * not provide the IGN and the IGN is constant for all devices on
741 * that PCI controller.
742 * This could cause problems for the FFB/external interrupt which
743 * has a full vector that can be set arbitrarily.
746 if (ino > PSYCHO_MAX_INO) {
747 device_printf(sc->sc_dev, "out of range INO %d requested\n",
753 /* Hunt through OBIO first. */
754 diag = PSYCHO_READ8(sc, PSR_OBIO_INT_DIAG);
755 for (intrmap = PSR_SCSI_INT_MAP, intrclr = PSR_SCSI_INT_CLR;
756 intrmap <= PSR_PWRMGT_INT_MAP; intrmap += 8, intrclr += 8,
758 if (sc->sc_mode == PSYCHO_MODE_SABRE &&
759 (intrmap == PSR_TIMER0_INT_MAP ||
760 intrmap == PSR_TIMER1_INT_MAP ||
761 intrmap == PSR_PCIBERR_INT_MAP ||
762 intrmap == PSR_PWRMGT_INT_MAP))
764 if (INTINO(PSYCHO_READ8(sc, intrmap)) == ino) {
772 diag = PSYCHO_READ8(sc, PSR_PCI_INT_DIAG);
773 /* Now do PCI interrupts. */
774 for (intrmap = PSR_PCIA0_INT_MAP, intrclr = PSR_PCIA0_INT_CLR;
775 intrmap <= PSR_PCIB3_INT_MAP; intrmap += 8, intrclr += 32,
777 if (sc->sc_mode == PSYCHO_MODE_PSYCHO &&
778 (intrmap == PSR_PCIA2_INT_MAP ||
779 intrmap == PSR_PCIA3_INT_MAP))
781 if (((PSYCHO_READ8(sc, intrmap) ^ ino) & 0x3c) == 0) {
782 intrclr += 8 * (ino & 3);
783 diag = (diag >> ((ino & 3) * 2)) & 2;
789 if (intrmapptr != NULL)
790 *intrmapptr = intrmap;
791 if (intrclrptr != NULL)
792 *intrclrptr = intrclr;
793 if (intrdiagptr != NULL)
804 struct psycho_softc *sc = arg;
807 afar = PSYCHO_READ8(sc, PSR_UE_AFA);
808 afsr = PSYCHO_READ8(sc, PSR_UE_AFS);
810 * On the UltraSPARC-IIi/IIe, IOMMU misses/protection faults cause
811 * the AFAR to be set to the physical address of the TTE entry that
812 * was invalid/write protected. Call into the IOMMU code to have
813 * them decoded to virtual I/O addresses.
815 if ((afsr & UEAFSR_P_DTE) != 0)
816 iommu_decode_fault(sc->sc_is, afar);
817 panic("%s: uncorrectable DMA error AFAR %#lx AFSR %#lx",
818 device_get_nameunit(sc->sc_dev), (u_long)afar, (u_long)afsr);
819 return (FILTER_HANDLED);
825 struct psycho_softc *sc = arg;
828 mtx_lock_spin(sc->sc_mtx);
829 afar = PSYCHO_READ8(sc, PSR_CE_AFA);
830 afsr = PSYCHO_READ8(sc, PSR_CE_AFS);
831 device_printf(sc->sc_dev, "correctable DMA error AFAR %#lx "
832 "AFSR %#lx\n", (u_long)afar, (u_long)afsr);
833 /* Clear the error bits that we caught. */
834 PSYCHO_WRITE8(sc, PSR_CE_AFS, afsr);
835 mtx_unlock_spin(sc->sc_mtx);
836 return (FILTER_HANDLED);
840 psycho_pci_bus(void *arg)
842 struct psycho_softc *sc = arg;
845 afar = PCICTL_READ8(sc, PCR_AFA);
846 afsr = PCICTL_READ8(sc, PCR_AFS);
847 panic("%s: PCI bus %c error AFAR %#lx AFSR %#lx",
848 device_get_nameunit(sc->sc_dev), 'A' + sc->sc_half, (u_long)afar,
850 return (FILTER_HANDLED);
854 psycho_powerdebug(void *arg __unused)
857 kdb_enter(KDB_WHY_POWERFAIL, "powerfail");
858 return (FILTER_HANDLED);
862 psycho_powerdown(void *arg __unused)
866 /* As the interrupt is cleared we may be called multiple times. */
870 printf("Power Failure Detected: Shutting down NOW.\n");
871 shutdown_nice(RB_POWEROFF);
875 psycho_overtemp(void *arg __unused)
879 /* As the interrupt is cleared we may be called multiple times. */
883 printf("DANGER: OVER TEMPERATURE detected.\nShutting down NOW.\n");
884 shutdown_nice(RB_POWEROFF);
887 #ifdef PSYCHO_MAP_WAKEUP
889 psycho_wakeup(void *arg)
891 struct psycho_softc *sc = arg;
893 /* We don't really have a framework to deal with this properly. */
894 device_printf(sc->sc_dev, "power management wakeup\n");
895 return (FILTER_HANDLED);
897 #endif /* PSYCHO_MAP_WAKEUP */
900 psycho_iommu_init(struct psycho_softc *sc, int tsbsize, uint32_t dvmabase)
902 struct iommu_state *is = sc->sc_is;
904 /* Punch in our copies. */
905 is->is_bustag = rman_get_bustag(sc->sc_mem_res);
906 is->is_bushandle = rman_get_bushandle(sc->sc_mem_res);
907 is->is_iommu = PSR_IOMMU;
908 is->is_dtag = PSR_IOMMU_TLB_TAG_DIAG;
909 is->is_ddram = PSR_IOMMU_TLB_DATA_DIAG;
910 is->is_dqueue = PSR_IOMMU_QUEUE_DIAG;
911 is->is_dva = PSR_IOMMU_SVADIAG;
912 is->is_dtcmp = PSR_IOMMU_TLB_CMP_DIAG;
914 iommu_init(device_get_nameunit(sc->sc_dev), is, tsbsize, dvmabase, 0);
918 psycho_maxslots(device_t dev)
921 /* XXX: is this correct? */
922 return (PCI_SLOTMAX);
926 psycho_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
929 struct psycho_softc *sc;
930 bus_space_handle_t bh;
937 sc = device_get_softc(dev);
938 if (bus < sc->sc_pci_secbus || bus > sc->sc_pci_subbus ||
939 slot > PCI_SLOTMAX || func > PCI_FUNCMAX || reg > PCI_REGMAX)
942 bh = sc->sc_pci_bh[OFW_PCI_CS_CONFIG];
945 * The Hummingbird and Sabre bridges are picky in that they
946 * only allow their config space to be accessed using the
947 * "native" width of the respective register being accessed
948 * and return semi-random other content of their config space
949 * otherwise. Given that the PCI specs don't say anything
950 * about such a (unusual) limitation and lots of stuff expects
951 * to be able to access the contents of the config space at
952 * any width we allow just that. We do this by using a copy
953 * of the header of the bridge (the rest is all zero anyway)
954 * read during attach (expect for PCIR_STATUS) in order to
956 * The Psycho bridges contain a dupe of their header at 0x80
957 * which we nullify that way also.
959 if (bus == sc->sc_pci_secbus && slot == PCS_DEVICE &&
961 if (offset % width != 0)
964 if (reg >= sizeof(sc->sc_pci_hpbcfg))
967 if ((reg < PCIR_STATUS && reg + width > PCIR_STATUS) ||
968 reg == PCIR_STATUS || reg == PCIR_STATUS + 1)
969 le16enc(&sc->sc_pci_hpbcfg[PCIR_STATUS],
970 bus_space_read_2(sc->sc_pci_cfgt, bh,
971 PSYCHO_CONF_OFF(sc->sc_pci_secbus,
972 PCS_DEVICE, PCS_FUNC, PCIR_STATUS)));
976 return (sc->sc_pci_hpbcfg[reg]);
978 return (le16dec(&sc->sc_pci_hpbcfg[reg]));
980 return (le32dec(&sc->sc_pci_hpbcfg[reg]));
984 offset = PSYCHO_CONF_OFF(bus, slot, func, reg);
987 i = bus_space_peek_1(sc->sc_pci_cfgt, bh, offset, &byte);
991 i = bus_space_peek_2(sc->sc_pci_cfgt, bh, offset, &shrt);
995 i = bus_space_peek_4(sc->sc_pci_cfgt, bh, offset, &wrd);
999 panic("%s: bad width", __func__);
1005 printf("%s: read data error reading: %d.%d.%d: 0x%x\n",
1006 __func__, bus, slot, func, reg);
1014 psycho_write_config(device_t dev, u_int bus, u_int slot, u_int func,
1015 u_int reg, uint32_t val, int width)
1017 struct psycho_softc *sc;
1018 bus_space_handle_t bh;
1021 sc = device_get_softc(dev);
1022 if (bus < sc->sc_pci_secbus || bus > sc->sc_pci_subbus ||
1023 slot > PCI_SLOTMAX || func > PCI_FUNCMAX || reg > PCI_REGMAX)
1026 offset = PSYCHO_CONF_OFF(bus, slot, func, reg);
1027 bh = sc->sc_pci_bh[OFW_PCI_CS_CONFIG];
1030 bus_space_write_1(sc->sc_pci_cfgt, bh, offset, val);
1033 bus_space_write_2(sc->sc_pci_cfgt, bh, offset, val);
1036 bus_space_write_4(sc->sc_pci_cfgt, bh, offset, val);
1039 panic("%s: bad width", __func__);
1045 psycho_route_interrupt(device_t bridge, device_t dev, int pin)
1047 struct psycho_softc *sc;
1048 struct ofw_pci_register reg;
1050 ofw_pci_intr_t pintr, mintr;
1051 uint8_t maskbuf[sizeof(reg) + sizeof(pintr)];
1053 sc = device_get_softc(bridge);
1055 if (ofw_bus_lookup_imap(ofw_bus_get_node(dev), &sc->sc_pci_iinfo,
1056 ®, sizeof(reg), &pintr, sizeof(pintr), &mintr, sizeof(mintr),
1060 * If this is outside of the range for an intpin, it's likely a full
1061 * INO, and no mapping is required at all; this happens on the U30,
1062 * where there's no interrupt map at the Psycho node. Fortunately,
1063 * there seem to be no INOs in the intpin range on this boxen, so
1064 * this easy heuristics will do.
1069 * Guess the INO; we always assume that this is a non-OBIO
1070 * device, and that pin is a "real" intpin number. Determine
1071 * the mapping register to be used by the slot number.
1072 * We only need to do this on E450s, it seems; here, the slot numbers
1073 * for bus A are one-based, while those for bus B seemingly have an
1074 * offset of 2 (hence the factor of 3 below).
1076 intrmap = PSR_PCIA0_INT_MAP +
1077 8 * (pci_get_slot(dev) - 1 + 3 * sc->sc_half);
1078 mintr = INTINO(PSYCHO_READ8(sc, intrmap)) + pin - 1;
1079 device_printf(bridge,
1080 "guessing interrupt %d for device %d.%d pin %d\n",
1081 (int)mintr, pci_get_slot(dev), pci_get_function(dev), pin);
1086 psycho_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
1088 struct psycho_softc *sc;
1090 sc = device_get_softc(dev);
1092 case PCIB_IVAR_DOMAIN:
1093 *result = device_get_unit(dev);
1096 *result = sc->sc_pci_secbus;
1103 sabre_dmamap_sync(bus_dma_tag_t dt, bus_dmamap_t map, bus_dmasync_op_t op)
1105 struct iommu_state *is = dt->dt_cookie;
1107 if ((map->dm_flags & DMF_LOADED) == 0)
1110 if ((op & BUS_DMASYNC_POSTREAD) != 0)
1111 (void)bus_space_read_8(is->is_bustag, is->is_bushandle,
1112 PSR_DMA_WRITE_SYNC);
1114 if ((op & BUS_DMASYNC_PREWRITE) != 0)
1119 psycho_intr_enable(void *arg)
1121 struct intr_vector *iv = arg;
1122 struct psycho_icarg *pica = iv->iv_icarg;
1124 PSYCHO_WRITE8(pica->pica_sc, pica->pica_map,
1125 INTMAP_ENABLE(iv->iv_vec, iv->iv_mid));
1129 psycho_intr_disable(void *arg)
1131 struct intr_vector *iv = arg;
1132 struct psycho_icarg *pica = iv->iv_icarg;
1134 PSYCHO_WRITE8(pica->pica_sc, pica->pica_map, iv->iv_vec);
1138 psycho_intr_assign(void *arg)
1140 struct intr_vector *iv = arg;
1141 struct psycho_icarg *pica = iv->iv_icarg;
1143 PSYCHO_WRITE8(pica->pica_sc, pica->pica_map, INTMAP_TID(
1144 PSYCHO_READ8(pica->pica_sc, pica->pica_map), iv->iv_mid));
1148 psycho_intr_clear(void *arg)
1150 struct intr_vector *iv = arg;
1151 struct psycho_icarg *pica = iv->iv_icarg;
1153 PSYCHO_WRITE8(pica->pica_sc, pica->pica_clr, INTCLR_IDLE);
1157 psycho_setup_intr(device_t dev, device_t child, struct resource *ires,
1158 int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg,
1161 struct psycho_softc *sc;
1164 sc = device_get_softc(dev);
1166 * Make sure the vector is fully specified and we registered
1167 * our interrupt controller for it.
1169 vec = rman_get_start(ires);
1170 if (INTIGN(vec) != sc->sc_ign ||
1171 intr_vectors[vec].iv_ic != &psycho_ic) {
1172 device_printf(dev, "invalid interrupt vector 0x%lx\n", vec);
1175 return (bus_generic_setup_intr(dev, child, ires, flags, filt, intr,
1179 static struct resource *
1180 psycho_alloc_resource(device_t bus, device_t child, int type, int *rid,
1181 u_long start, u_long end, u_long count, u_int flags)
1183 struct psycho_softc *sc;
1184 struct resource *rv;
1187 sc = device_get_softc(bus);
1191 * XXX: Don't accept blank ranges for now, only single
1192 * interrupts. The other case should not happen with
1193 * the MI PCI code...
1194 * XXX: This may return a resource that is out of the
1195 * range that was specified. Is this correct...?
1198 panic("%s: XXX: interrupt range", __func__);
1199 start = end = INTMAP_VEC(sc->sc_ign, end);
1200 return (bus_generic_alloc_resource(bus, child, type, rid,
1201 start, end, count, flags));
1202 case SYS_RES_MEMORY:
1203 rm = &sc->sc_pci_mem_rman;
1205 case SYS_RES_IOPORT:
1206 rm = &sc->sc_pci_io_rman;
1212 rv = rman_reserve_resource(rm, start, end, count, flags & ~RF_ACTIVE,
1216 rman_set_rid(rv, *rid);
1218 if ((flags & RF_ACTIVE) != 0 && bus_activate_resource(child, type,
1220 rman_release_resource(rv);
1227 psycho_activate_resource(device_t bus, device_t child, int type, int rid,
1230 struct psycho_softc *sc;
1231 struct bus_space_tag *tag;
1233 sc = device_get_softc(bus);
1236 return (bus_generic_activate_resource(bus, child, type, rid,
1238 case SYS_RES_MEMORY:
1239 tag = sparc64_alloc_bus_tag(r, rman_get_bustag(
1240 sc->sc_mem_res), PCI_MEMORY_BUS_SPACE, NULL);
1243 rman_set_bustag(r, tag);
1244 rman_set_bushandle(r, sc->sc_pci_bh[OFW_PCI_CS_MEM32] +
1247 case SYS_RES_IOPORT:
1248 rman_set_bustag(r, sc->sc_pci_iot);
1249 rman_set_bushandle(r, sc->sc_pci_bh[OFW_PCI_CS_IO] +
1253 return (rman_activate_resource(r));
1257 psycho_adjust_resource(device_t bus, device_t child, int type,
1258 struct resource *r, u_long start, u_long end)
1260 struct psycho_softc *sc;
1263 sc = device_get_softc(bus);
1266 return (bus_generic_adjust_resource(bus, child, type, r,
1268 case SYS_RES_MEMORY:
1269 rm = &sc->sc_pci_mem_rman;
1271 case SYS_RES_IOPORT:
1272 rm = &sc->sc_pci_io_rman;
1277 if (rman_is_region_manager(r, rm) == 0)
1279 return (rman_adjust_resource(r, start, end));
1282 static bus_dma_tag_t
1283 psycho_get_dma_tag(device_t bus, device_t child __unused)
1285 struct psycho_softc *sc;
1287 sc = device_get_softc(bus);
1288 return (sc->sc_pci_dmat);
1292 psycho_get_node(device_t bus, device_t child __unused)
1294 struct psycho_softc *sc;
1296 sc = device_get_softc(bus);
1297 /* We only have one child, the PCI bus, which needs our own node. */
1298 return (sc->sc_node);
1302 psycho_setup_device(device_t bus, device_t child)
1304 struct psycho_softc *sc;
1307 sc = device_get_softc(bus);
1309 * Revision 0 EBus bridges have a bug which prevents them from
1310 * working when bus parking is enabled.
1312 if ((strcmp(ofw_bus_get_name(child), "ebus") == 0 ||
1313 strcmp(ofw_bus_get_name(child), "pci108e,1000") == 0) &&
1314 OF_getprop(ofw_bus_get_node(child), "revision-id", &rev,
1315 sizeof(rev)) > 0 && rev == 0)
1316 PCICTL_WRITE8(sc, PCR_CS, PCICTL_READ8(sc, PCR_CS) &