MFC r368207,368607:

[FreeBSD/stable/10.git] / sys / ufs / ffs / softdep.h

/*-
 * Copyright 1998, 2000 Marshall Kirk McKusick. All Rights Reserved.
 *
 * The soft updates code is derived from the appendix of a University
 * of Michigan technical report (Gregory R. Ganger and Yale N. Patt,
 * "Soft Updates: A Solution to the Metadata Update Problem in File
 * Systems", CSE-TR-254-95, August 1995).
 *
 * Further information about soft updates can be obtained from:
 *
 *      Marshall Kirk McKusick          http://www.mckusick.com/softdep/
 *      1614 Oxford Street              mckusick@mckusick.com
 *      Berkeley, CA 94709-1608         +1-510-843-9542
 *      USA
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY MARSHALL KIRK MCKUSICK ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL MARSHALL KIRK MCKUSICK BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *      @(#)softdep.h   9.7 (McKusick) 6/21/00
 * $FreeBSD$
 */

#include <sys/queue.h>

/*
 * Allocation dependencies are handled with undo/redo on the in-memory
 * copy of the data. A particular data dependency is eliminated when
 * it is ALLCOMPLETE: that is ATTACHED, DEPCOMPLETE, and COMPLETE.
 * 
 * The ATTACHED flag means that the data is not currently being written
 * to disk.
 * 
 * The UNDONE flag means that the data has been rolled back to a safe
 * state for writing to the disk. When the I/O completes, the data is
 * restored to its current form and the state reverts to ATTACHED.
 * The data must be locked throughout the rollback, I/O, and roll
 * forward so that the rolled back information is never visible to
 * user processes.
 *
 * The COMPLETE flag indicates that the item has been written. For example,
 * a dependency that requires that an inode be written will be marked
 * COMPLETE after the inode has been written to disk.
 * 
 * The DEPCOMPLETE flag indicates the completion of any other
 * dependencies such as the writing of a cylinder group map has been
 * completed. A dependency structure may be freed only when both it
 * and its dependencies have completed and any rollbacks that are in
 * progress have finished as indicated by the set of ALLCOMPLETE flags
 * all being set.
 * 
 * The two MKDIR flags indicate additional dependencies that must be done
 * when creating a new directory. MKDIR_BODY is cleared when the directory
 * data block containing the "." and ".." entries has been written.
 * MKDIR_PARENT is cleared when the parent inode with the increased link
 * count for ".." has been written. When both MKDIR flags have been
 * cleared, the DEPCOMPLETE flag is set to indicate that the directory
 * dependencies have been completed. The writing of the directory inode
 * itself sets the COMPLETE flag which then allows the directory entry for
 * the new directory to be written to disk. The RMDIR flag marks a dirrem
 * structure as representing the removal of a directory rather than a
 * file. When the removal dependencies are completed, additional work needs
 * to be done* (an additional decrement of the associated inode, and a
 * decrement of the parent inode).
 *
 * The DIRCHG flag marks a diradd structure as representing the changing
 * of an existing entry rather than the addition of a new one. When
 * the update is complete the dirrem associated with the inode for
 * the old name must be added to the worklist to do the necessary
 * reference count decrement.
 * 
 * The GOINGAWAY flag indicates that the data structure is frozen from
 * further change until its dependencies have been completed and its
 * resources freed after which it will be discarded.
 *
 * The IOSTARTED flag prevents multiple calls to the I/O start routine from
 * doing multiple rollbacks.
 *
 * The NEWBLOCK flag marks pagedep structures that have just been allocated,
 * so must be claimed by the inode before all dependencies are complete.
 *
 * The INPROGRESS flag marks worklist structures that are still on the
 * worklist, but are being considered for action by some process.
 *
 * The UFS1FMT flag indicates that the inode being processed is a ufs1 format.
 *
 * The EXTDATA flag indicates that the allocdirect describes an
 * extended-attributes dependency.
 *
 * The ONWORKLIST flag shows whether the structure is currently linked
 * onto a worklist.
 *
 * The UNLINK* flags track the progress of updating the on-disk linked
 * list of active but unlinked inodes. When an inode is first unlinked
 * it is marked as UNLINKED. When its on-disk di_freelink has been
 * written its UNLINKNEXT flags is set. When its predecessor in the
 * list has its di_freelink pointing at us its UNLINKPREV is set.
 * When the on-disk list can reach it from the superblock, its
 * UNLINKONLIST flag is set. Once all of these flags are set, it
 * is safe to let its last name be removed.
 */
#define ATTACHED        0x000001
#define UNDONE          0x000002
#define COMPLETE        0x000004
#define DEPCOMPLETE     0x000008
#define MKDIR_PARENT    0x000010 /* diradd, mkdir, jaddref, jsegdep only */
#define MKDIR_BODY      0x000020 /* diradd, mkdir, jaddref only */
#define RMDIR           0x000040 /* dirrem only */
#define DIRCHG          0x000080 /* diradd, dirrem only */
#define GOINGAWAY       0x000100 /* indirdep, jremref only */
#define IOSTARTED       0x000200 /* inodedep, pagedep, bmsafemap only */
#define DELAYEDFREE     0x000400 /* allocindirect free delayed. */
#define NEWBLOCK        0x000800 /* pagedep, jaddref only */
#define INPROGRESS      0x001000 /* dirrem, freeblks, freefrag, freefile only */
#define UFS1FMT         0x002000 /* indirdep only */
#define EXTDATA         0x004000 /* allocdirect only */
#define ONWORKLIST      0x008000
#define IOWAITING       0x010000 /* Thread is waiting for IO to complete. */
#define ONDEPLIST       0x020000 /* Structure is on a dependency list. */
#define UNLINKED        0x040000 /* inodedep has been unlinked. */
#define UNLINKNEXT      0x080000 /* inodedep has valid di_freelink */
#define UNLINKPREV      0x100000 /* inodedep is pointed at in the unlink list */
#define UNLINKONLIST    0x200000 /* inodedep is in the unlinked list on disk */
#define UNLINKLINKS     (UNLINKNEXT | UNLINKPREV)
#define WRITESUCCEEDED  0x400000 /* the disk write completed successfully */

#define ALLCOMPLETE     (ATTACHED | COMPLETE | DEPCOMPLETE)

/*
 * Values for each of the soft dependency types.
 */
#define D_PAGEDEP       0
#define D_INODEDEP      1
#define D_BMSAFEMAP     2
#define D_NEWBLK        3
#define D_ALLOCDIRECT   4
#define D_INDIRDEP      5
#define D_ALLOCINDIR    6
#define D_FREEFRAG      7
#define D_FREEBLKS      8
#define D_FREEFILE      9
#define D_DIRADD        10
#define D_MKDIR         11
#define D_DIRREM        12
#define D_NEWDIRBLK     13
#define D_FREEWORK      14
#define D_FREEDEP       15
#define D_JADDREF       16
#define D_JREMREF       17
#define D_JMVREF        18
#define D_JNEWBLK       19
#define D_JFREEBLK      20
#define D_JFREEFRAG     21
#define D_JSEG          22
#define D_JSEGDEP       23
#define D_SBDEP         24
#define D_JTRUNC        25
#define D_JFSYNC        26
#define D_SENTINEL      27
#define D_LAST          D_SENTINEL

/*
 * The workitem queue.
 * 
 * It is sometimes useful and/or necessary to clean up certain dependencies
 * in the background rather than during execution of an application process
 * or interrupt service routine. To realize this, we append dependency
 * structures corresponding to such tasks to a "workitem" queue. In a soft
 * updates implementation, most pending workitems should not wait for more
 * than a couple of seconds, so the filesystem syncer process awakens once
 * per second to process the items on the queue.
 */

/* LIST_HEAD(workhead, worklist);       -- declared in buf.h */

/*
 * Each request can be linked onto a work queue through its worklist structure.
 * To avoid the need for a pointer to the structure itself, this structure
 * MUST be declared FIRST in each type in which it appears! If more than one
 * worklist is needed in the structure, then a wk_data field must be added
 * and the macros below changed to use it.
 */
struct worklist {
        LIST_ENTRY(worklist)    wk_list;        /* list of work requests */
        struct mount            *wk_mp;         /* Mount we live in */
        unsigned int            wk_type:8,      /* type of request */
                                wk_state:24;    /* state flags */
};
#define WK_DATA(wk) ((void *)(wk))
#define WK_PAGEDEP(wk) ((struct pagedep *)(wk))
#define WK_INODEDEP(wk) ((struct inodedep *)(wk))
#define WK_BMSAFEMAP(wk) ((struct bmsafemap *)(wk))
#define WK_NEWBLK(wk)  ((struct newblk *)(wk))
#define WK_ALLOCDIRECT(wk) ((struct allocdirect *)(wk))
#define WK_INDIRDEP(wk) ((struct indirdep *)(wk))
#define WK_ALLOCINDIR(wk) ((struct allocindir *)(wk))
#define WK_FREEFRAG(wk) ((struct freefrag *)(wk))
#define WK_FREEBLKS(wk) ((struct freeblks *)(wk))
#define WK_FREEWORK(wk) ((struct freework *)(wk))
#define WK_FREEFILE(wk) ((struct freefile *)(wk))
#define WK_DIRADD(wk) ((struct diradd *)(wk))
#define WK_MKDIR(wk) ((struct mkdir *)(wk))
#define WK_DIRREM(wk) ((struct dirrem *)(wk))
#define WK_NEWDIRBLK(wk) ((struct newdirblk *)(wk))
#define WK_JADDREF(wk) ((struct jaddref *)(wk))
#define WK_JREMREF(wk) ((struct jremref *)(wk))
#define WK_JMVREF(wk) ((struct jmvref *)(wk))
#define WK_JSEGDEP(wk) ((struct jsegdep *)(wk))
#define WK_JSEG(wk) ((struct jseg *)(wk))
#define WK_JNEWBLK(wk) ((struct jnewblk *)(wk))
#define WK_JFREEBLK(wk) ((struct jfreeblk *)(wk))
#define WK_FREEDEP(wk) ((struct freedep *)(wk))
#define WK_JFREEFRAG(wk) ((struct jfreefrag *)(wk))
#define WK_SBDEP(wk) ((struct sbdep *)(wk))
#define WK_JTRUNC(wk) ((struct jtrunc *)(wk))
#define WK_JFSYNC(wk) ((struct jfsync *)(wk))

/*
 * Various types of lists
 */
LIST_HEAD(dirremhd, dirrem);
LIST_HEAD(diraddhd, diradd);
LIST_HEAD(newblkhd, newblk);
LIST_HEAD(inodedephd, inodedep);
LIST_HEAD(allocindirhd, allocindir);
LIST_HEAD(allocdirecthd, allocdirect);
TAILQ_HEAD(allocdirectlst, allocdirect);
LIST_HEAD(indirdephd, indirdep);
LIST_HEAD(jaddrefhd, jaddref);
LIST_HEAD(jremrefhd, jremref);
LIST_HEAD(jmvrefhd, jmvref);
LIST_HEAD(jnewblkhd, jnewblk);
LIST_HEAD(jblkdephd, jblkdep);
LIST_HEAD(freeworkhd, freework);
TAILQ_HEAD(freeworklst, freework);
TAILQ_HEAD(jseglst, jseg);
TAILQ_HEAD(inoreflst, inoref);
TAILQ_HEAD(freeblklst, freeblks);

/*
 * The "pagedep" structure tracks the various dependencies related to
 * a particular directory page. If a directory page has any dependencies,
 * it will have a pagedep linked to its associated buffer. The
 * pd_dirremhd list holds the list of dirrem requests which decrement
 * inode reference counts. These requests are processed after the
 * directory page with the corresponding zero'ed entries has been
 * written. The pd_diraddhd list maintains the list of diradd requests
 * which cannot be committed until their corresponding inode has been
 * written to disk. Because a directory may have many new entries
 * being created, several lists are maintained hashed on bits of the
 * offset of the entry into the directory page to keep the lists from
 * getting too long. Once a new directory entry has been cleared to
 * be written, it is moved to the pd_pendinghd list. After the new
 * entry has been written to disk it is removed from the pd_pendinghd
 * list, any removed operations are done, and the dependency structure
 * is freed.
 */
#define DAHASHSZ 5
#define DIRADDHASH(offset) (((offset) >> 2) % DAHASHSZ)
struct pagedep {
        struct  worklist pd_list;       /* page buffer */
#       define  pd_state pd_list.wk_state /* check for multiple I/O starts */
        LIST_ENTRY(pagedep) pd_hash;    /* hashed lookup */
        ino_t   pd_ino;                 /* associated file */
        ufs_lbn_t pd_lbn;               /* block within file */
        struct  newdirblk *pd_newdirblk; /* associated newdirblk if NEWBLOCK */
        struct  dirremhd pd_dirremhd;   /* dirrem's waiting for page */
        struct  diraddhd pd_diraddhd[DAHASHSZ]; /* diradd dir entry updates */
        struct  diraddhd pd_pendinghd;  /* directory entries awaiting write */
        struct  jmvrefhd pd_jmvrefhd;   /* Dependent journal writes. */
};

/*
 * The "inodedep" structure tracks the set of dependencies associated
 * with an inode. One task that it must manage is delayed operations
 * (i.e., work requests that must be held until the inodedep's associated
 * inode has been written to disk). Getting an inode from its incore 
 * state to the disk requires two steps to be taken by the filesystem
 * in this order: first the inode must be copied to its disk buffer by
 * the VOP_UPDATE operation; second the inode's buffer must be written
 * to disk. To ensure that both operations have happened in the required
 * order, the inodedep maintains two lists. Delayed operations are
 * placed on the id_inowait list. When the VOP_UPDATE is done, all
 * operations on the id_inowait list are moved to the id_bufwait list.
 * When the buffer is written, the items on the id_bufwait list can be
 * safely moved to the work queue to be processed. A second task of the
 * inodedep structure is to track the status of block allocation within
 * the inode.  Each block that is allocated is represented by an
 * "allocdirect" structure (see below). It is linked onto the id_newinoupdt
 * list until both its contents and its allocation in the cylinder
 * group map have been written to disk. Once these dependencies have been
 * satisfied, it is removed from the id_newinoupdt list and any followup
 * actions such as releasing the previous block or fragment are placed
 * on the id_inowait list. When an inode is updated (a VOP_UPDATE is
 * done), the "inodedep" structure is linked onto the buffer through
 * its worklist. Thus, it will be notified when the buffer is about
 * to be written and when it is done. At the update time, all the
 * elements on the id_newinoupdt list are moved to the id_inoupdt list
 * since those changes are now relevant to the copy of the inode in the
 * buffer. Also at update time, the tasks on the id_inowait list are
 * moved to the id_bufwait list so that they will be executed when
 * the updated inode has been written to disk. When the buffer containing
 * the inode is written to disk, any updates listed on the id_inoupdt
 * list are rolled back as they are not yet safe. Following the write,
 * the changes are once again rolled forward and any actions on the
 * id_bufwait list are processed (since those actions are now safe).
 * The entries on the id_inoupdt and id_newinoupdt lists must be kept
 * sorted by logical block number to speed the calculation of the size
 * of the rolled back inode (see explanation in initiate_write_inodeblock).
 * When a directory entry is created, it is represented by a diradd.
 * The diradd is added to the id_inowait list as it cannot be safely
 * written to disk until the inode that it represents is on disk. After
 * the inode is written, the id_bufwait list is processed and the diradd
 * entries are moved to the id_pendinghd list where they remain until
 * the directory block containing the name has been written to disk.
 * The purpose of keeping the entries on the id_pendinghd list is so that
 * the softdep_fsync function can find and push the inode's directory
 * name(s) as part of the fsync operation for that file.
 */
struct inodedep {
        struct  worklist id_list;       /* buffer holding inode block */
#       define  id_state id_list.wk_state /* inode dependency state */
        LIST_ENTRY(inodedep) id_hash;   /* hashed lookup */
        TAILQ_ENTRY(inodedep) id_unlinked;      /* Unlinked but ref'd inodes */
        struct  fs *id_fs;              /* associated filesystem */
        ino_t   id_ino;                 /* dependent inode */
        nlink_t id_nlinkdelta;          /* saved effective link count */
        nlink_t id_savednlink;          /* Link saved during rollback */
        LIST_ENTRY(inodedep) id_deps;   /* bmsafemap's list of inodedep's */
        struct  bmsafemap *id_bmsafemap; /* related bmsafemap (if pending) */
        struct  diradd *id_mkdiradd;    /* diradd for a mkdir. */
        struct  inoreflst id_inoreflst; /* Inode reference adjustments. */
        long    id_savedextsize;        /* ext size saved during rollback */
        off_t   id_savedsize;           /* file size saved during rollback */
        struct  dirremhd id_dirremhd;   /* Removals pending. */
        struct  workhead id_pendinghd;  /* entries awaiting directory write */
        struct  workhead id_bufwait;    /* operations after inode written */
        struct  workhead id_inowait;    /* operations waiting inode update */
        struct  allocdirectlst id_inoupdt; /* updates before inode written */
        struct  allocdirectlst id_newinoupdt; /* updates when inode written */
        struct  allocdirectlst id_extupdt; /* extdata updates pre-inode write */
        struct  allocdirectlst id_newextupdt; /* extdata updates at ino write */
        struct  freeblklst id_freeblklst; /* List of partial truncates. */
        union {
        struct  ufs1_dinode *idu_savedino1; /* saved ufs1_dinode contents */
        struct  ufs2_dinode *idu_savedino2; /* saved ufs2_dinode contents */
        } id_un;
};
#define id_savedino1 id_un.idu_savedino1
#define id_savedino2 id_un.idu_savedino2

/*
 * A "bmsafemap" structure maintains a list of dependency structures
 * that depend on the update of a particular cylinder group map.
 * It has lists for newblks, allocdirects, allocindirs, and inodedeps.
 * It is attached to the buffer of a cylinder group block when any of
 * these things are allocated from the cylinder group. It is freed
 * after the cylinder group map is written and the state of its
 * dependencies are updated with DEPCOMPLETE to indicate that it has
 * been processed.
 */
struct bmsafemap {
        struct  worklist sm_list;       /* cylgrp buffer */
#       define  sm_state sm_list.wk_state
        LIST_ENTRY(bmsafemap) sm_hash;  /* Hash links. */
        LIST_ENTRY(bmsafemap) sm_next;  /* Mount list. */
        int     sm_cg;
        struct  buf *sm_buf;            /* associated buffer */
        struct  allocdirecthd sm_allocdirecthd; /* allocdirect deps */
        struct  allocdirecthd sm_allocdirectwr; /* writing allocdirect deps */
        struct  allocindirhd sm_allocindirhd; /* allocindir deps */
        struct  allocindirhd sm_allocindirwr; /* writing allocindir deps */
        struct  inodedephd sm_inodedephd; /* inodedep deps */
        struct  inodedephd sm_inodedepwr; /* writing inodedep deps */
        struct  newblkhd sm_newblkhd;   /* newblk deps */
        struct  newblkhd sm_newblkwr;   /* writing newblk deps */
        struct  jaddrefhd sm_jaddrefhd; /* Pending inode allocations. */
        struct  jnewblkhd sm_jnewblkhd; /* Pending block allocations. */
        struct  workhead sm_freehd;     /* Freedep deps. */
        struct  workhead sm_freewr;     /* Written freedeps. */
};

/*
 * A "newblk" structure is attached to a bmsafemap structure when a block
 * or fragment is allocated from a cylinder group. Its state is set to
 * DEPCOMPLETE when its cylinder group map is written. It is converted to
 * an allocdirect or allocindir allocation once the allocator calls the
 * appropriate setup function. It will initially be linked onto a bmsafemap
 * list. Once converted it can be linked onto the lists described for
 * allocdirect or allocindir as described below.
 */ 
struct newblk {
        struct  worklist nb_list;       /* See comment above. */
#       define  nb_state nb_list.wk_state
        LIST_ENTRY(newblk) nb_hash;     /* Hashed lookup. */
        LIST_ENTRY(newblk) nb_deps;     /* Bmsafemap's list of newblks. */
        struct  jnewblk *nb_jnewblk;    /* New block journal entry. */
        struct  bmsafemap *nb_bmsafemap;/* Cylgrp dep (if pending). */
        struct  freefrag *nb_freefrag;  /* Fragment to be freed (if any). */
        struct  indirdephd nb_indirdeps; /* Children indirect blocks. */
        struct  workhead nb_newdirblk;  /* Dir block to notify when written. */
        struct  workhead nb_jwork;      /* Journal work pending. */
        ufs2_daddr_t    nb_newblkno;    /* New value of block pointer. */
};

/*
 * An "allocdirect" structure is attached to an "inodedep" when a new block
 * or fragment is allocated and pointed to by the inode described by
 * "inodedep". The worklist is linked to the buffer that holds the block.
 * When the block is first allocated, it is linked to the bmsafemap
 * structure associated with the buffer holding the cylinder group map
 * from which it was allocated. When the cylinder group map is written
 * to disk, ad_state has the DEPCOMPLETE flag set. When the block itself
 * is written, the COMPLETE flag is set. Once both the cylinder group map
 * and the data itself have been written, it is safe to write the inode
 * that claims the block. If there was a previous fragment that had been
 * allocated before the file was increased in size, the old fragment may
 * be freed once the inode claiming the new block is written to disk.
 * This ad_fragfree request is attached to the id_inowait list of the
 * associated inodedep (pointed to by ad_inodedep) for processing after
 * the inode is written. When a block is allocated to a directory, an
 * fsync of a file whose name is within that block must ensure not only
 * that the block containing the file name has been written, but also
 * that the on-disk inode references that block. When a new directory
 * block is created, we allocate a newdirblk structure which is linked
 * to the associated allocdirect (on its ad_newdirblk list). When the
 * allocdirect has been satisfied, the newdirblk structure is moved to
 * the inodedep id_bufwait list of its directory to await the inode
 * being written. When the inode is written, the directory entries are
 * fully committed and can be deleted from their pagedep->id_pendinghd
 * and inodedep->id_pendinghd lists.
 */
struct allocdirect {
        struct  newblk ad_block;        /* Common block logic */
#       define  ad_list ad_block.nb_list /* block pointer worklist */
#       define  ad_state ad_list.wk_state /* block pointer state */
        TAILQ_ENTRY(allocdirect) ad_next; /* inodedep's list of allocdirect's */
        struct  inodedep *ad_inodedep;  /* associated inodedep */
        ufs2_daddr_t    ad_oldblkno;    /* old value of block pointer */
        int             ad_offset;      /* Pointer offset in parent. */
        long            ad_newsize;     /* size of new block */
        long            ad_oldsize;     /* size of old block */
};
#define ad_newblkno     ad_block.nb_newblkno
#define ad_freefrag     ad_block.nb_freefrag
#define ad_newdirblk    ad_block.nb_newdirblk

/*
 * A single "indirdep" structure manages all allocation dependencies for
 * pointers in an indirect block. The up-to-date state of the indirect
 * block is stored in ir_savedata. The set of pointers that may be safely
 * written to the disk is stored in ir_safecopy. The state field is used
 * only to track whether the buffer is currently being written (in which
 * case it is not safe to update ir_safecopy). Ir_deplisthd contains the
 * list of allocindir structures, one for each block that needs to be
 * written to disk. Once the block and its bitmap allocation have been
 * written the safecopy can be updated to reflect the allocation and the
 * allocindir structure freed. If ir_state indicates that an I/O on the
 * indirect block is in progress when ir_safecopy is to be updated, the
 * update is deferred by placing the allocindir on the ir_donehd list.
 * When the I/O on the indirect block completes, the entries on the
 * ir_donehd list are processed by updating their corresponding ir_safecopy
 * pointers and then freeing the allocindir structure.
 */
struct indirdep {
        struct  worklist ir_list;       /* buffer holding indirect block */
#       define  ir_state ir_list.wk_state /* indirect block pointer state */
        LIST_ENTRY(indirdep) ir_next;   /* alloc{direct,indir} list */
        TAILQ_HEAD(, freework) ir_trunc;        /* List of truncations. */
        caddr_t ir_saveddata;           /* buffer cache contents */
        struct  buf *ir_savebp;         /* buffer holding safe copy */
        struct  buf *ir_bp;             /* buffer holding live copy */
        struct  allocindirhd ir_completehd; /* waiting for indirdep complete */
        struct  allocindirhd ir_writehd; /* Waiting for the pointer write. */
        struct  allocindirhd ir_donehd; /* done waiting to update safecopy */
        struct  allocindirhd ir_deplisthd; /* allocindir deps for this block */
        struct  freeblks *ir_freeblks;  /* Freeblks that frees this indir. */
};

/*
 * An "allocindir" structure is attached to an "indirdep" when a new block
 * is allocated and pointed to by the indirect block described by the
 * "indirdep". The worklist is linked to the buffer that holds the new block.
 * When the block is first allocated, it is linked to the bmsafemap
 * structure associated with the buffer holding the cylinder group map
 * from which it was allocated. When the cylinder group map is written
 * to disk, ai_state has the DEPCOMPLETE flag set. When the block itself
 * is written, the COMPLETE flag is set. Once both the cylinder group map
 * and the data itself have been written, it is safe to write the entry in
 * the indirect block that claims the block; the "allocindir" dependency 
 * can then be freed as it is no longer applicable.
 */
struct allocindir {
        struct  newblk ai_block;        /* Common block area */
#       define  ai_state ai_block.nb_list.wk_state /* indirect pointer state */
        LIST_ENTRY(allocindir) ai_next; /* indirdep's list of allocindir's */
        struct  indirdep *ai_indirdep;  /* address of associated indirdep */
        ufs2_daddr_t    ai_oldblkno;    /* old value of block pointer */
        ufs_lbn_t       ai_lbn;         /* Logical block number. */
        int             ai_offset;      /* Pointer offset in parent. */
};
#define ai_newblkno     ai_block.nb_newblkno
#define ai_freefrag     ai_block.nb_freefrag
#define ai_newdirblk    ai_block.nb_newdirblk

/*
 * The allblk union is used to size the newblk structure on allocation so
 * that it may be any one of three types.
 */
union allblk {
        struct  allocindir ab_allocindir;
        struct  allocdirect ab_allocdirect;
        struct  newblk  ab_newblk;
};

/*
 * A "freefrag" structure is attached to an "inodedep" when a previously
 * allocated fragment is replaced with a larger fragment, rather than extended.
 * The "freefrag" structure is constructed and attached when the replacement
 * block is first allocated. It is processed after the inode claiming the
 * bigger block that replaces it has been written to disk.
 */
struct freefrag {
        struct  worklist ff_list;       /* id_inowait or delayed worklist */
#       define  ff_state ff_list.wk_state
        struct  worklist *ff_jdep;      /* Associated journal entry. */
        struct  workhead ff_jwork;      /* Journal work pending. */
        ufs2_daddr_t ff_blkno;          /* fragment physical block number */
        long    ff_fragsize;            /* size of fragment being deleted */
        ino_t   ff_inum;                /* owning inode number */
        enum    vtype ff_vtype;         /* owning inode's file type */
};

/*
 * A "freeblks" structure is attached to an "inodedep" when the
 * corresponding file's length is reduced to zero. It records all
 * the information needed to free the blocks of a file after its
 * zero'ed inode has been written to disk.  The actual work is done
 * by child freework structures which are responsible for individual
 * inode pointers while freeblks is responsible for retiring the
 * entire operation when it is complete and holding common members.
 */
struct freeblks {
        struct  worklist fb_list;       /* id_inowait or delayed worklist */
#       define  fb_state fb_list.wk_state /* inode and dirty block state */
        TAILQ_ENTRY(freeblks) fb_next;  /* List of inode truncates. */
        struct  jblkdephd fb_jblkdephd; /* Journal entries pending */
        struct  workhead fb_freeworkhd; /* Work items pending */
        struct  workhead fb_jwork;      /* Journal work pending */
        struct  vnode *fb_devvp;        /* filesystem device vnode */
#ifdef QUOTA
        struct  dquot *fb_quota[MAXQUOTAS]; /* quotas to be adjusted */
#endif
        uint64_t fb_modrev;             /* Inode revision at start of trunc. */
        off_t   fb_len;                 /* Length we're truncating to. */
        ufs2_daddr_t fb_chkcnt;         /* Blocks released. */
        ino_t   fb_inum;                /* inode owner of blocks */
        enum    vtype fb_vtype;         /* inode owner's file type */
        uid_t   fb_uid;                 /* uid of previous owner of blocks */
        int     fb_ref;                 /* Children outstanding. */
        int     fb_cgwait;              /* cg writes outstanding. */
};

/*
 * A "freework" structure handles the release of a tree of blocks or a single
 * block.  Each indirect block in a tree is allocated its own freework
 * structure so that the indirect block may be freed only when all of its
 * children are freed.  In this way we enforce the rule that an allocated
 * block must have a valid path to a root that is journaled.  Each child
 * block acquires a reference and when the ref hits zero the parent ref
 * is decremented.  If there is no parent the freeblks ref is decremented.
 */
struct freework {
        struct  worklist fw_list;               /* Delayed worklist. */
#       define  fw_state fw_list.wk_state
        LIST_ENTRY(freework) fw_segs;           /* Seg list. */
        TAILQ_ENTRY(freework) fw_next;          /* Hash/Trunc list. */
        struct  jnewblk  *fw_jnewblk;           /* Journal entry to cancel. */
        struct  freeblks *fw_freeblks;          /* Root of operation. */
        struct  freework *fw_parent;            /* Parent indirect. */
        struct  indirdep *fw_indir;             /* indirect block. */
        ufs2_daddr_t     fw_blkno;              /* Our block #. */
        ufs_lbn_t        fw_lbn;                /* Original lbn before free. */
        uint16_t         fw_frags;              /* Number of frags. */
        uint16_t         fw_ref;                /* Number of children out. */
        uint16_t         fw_off;                /* Current working position. */
        uint16_t         fw_start;              /* Start of partial truncate. */
};

/*
 * A "freedep" structure is allocated to track the completion of a bitmap
 * write for a freework.  One freedep may cover many freed blocks so long
 * as they reside in the same cylinder group.  When the cg is written
 * the freedep decrements the ref on the freework which may permit it
 * to be freed as well.
 */
struct freedep {
        struct  worklist fd_list;       /* Delayed worklist. */
        struct  freework *fd_freework;  /* Parent freework. */
};

/*
 * A "freefile" structure is attached to an inode when its
 * link count is reduced to zero. It marks the inode as free in
 * the cylinder group map after the zero'ed inode has been written
 * to disk and any associated blocks and fragments have been freed.
 */
struct freefile {
        struct  worklist fx_list;       /* id_inowait or delayed worklist */
        mode_t  fx_mode;                /* mode of inode */
        ino_t   fx_oldinum;             /* inum of the unlinked file */
        struct  vnode *fx_devvp;        /* filesystem device vnode */
        struct  workhead fx_jwork;      /* journal work pending. */
};

/*
 * A "diradd" structure is linked to an "inodedep" id_inowait list when a
 * new directory entry is allocated that references the inode described
 * by "inodedep". When the inode itself is written (either the initial
 * allocation for new inodes or with the increased link count for
 * existing inodes), the COMPLETE flag is set in da_state. If the entry
 * is for a newly allocated inode, the "inodedep" structure is associated
 * with a bmsafemap which prevents the inode from being written to disk
 * until the cylinder group has been updated. Thus the da_state COMPLETE
 * flag cannot be set until the inode bitmap dependency has been removed.
 * When creating a new file, it is safe to write the directory entry that
 * claims the inode once the referenced inode has been written. Since
 * writing the inode clears the bitmap dependencies, the DEPCOMPLETE flag
 * in the diradd can be set unconditionally when creating a file. When
 * creating a directory, there are two additional dependencies described by
 * mkdir structures (see their description below). When these dependencies
 * are resolved the DEPCOMPLETE flag is set in the diradd structure.
 * If there are multiple links created to the same inode, there will be
 * a separate diradd structure created for each link. The diradd is
 * linked onto the pg_diraddhd list of the pagedep for the directory
 * page that contains the entry. When a directory page is written,
 * the pg_diraddhd list is traversed to rollback any entries that are
 * not yet ready to be written to disk. If a directory entry is being
 * changed (by rename) rather than added, the DIRCHG flag is set and
 * the da_previous entry points to the entry that will be "removed"
 * once the new entry has been committed. During rollback, entries
 * with da_previous are replaced with the previous inode number rather
 * than zero.
 *
 * The overlaying of da_pagedep and da_previous is done to keep the
 * structure down. If a da_previous entry is present, the pointer to its
 * pagedep is available in the associated dirrem entry. If the DIRCHG flag
 * is set, the da_previous entry is valid; if not set the da_pagedep entry
 * is valid. The DIRCHG flag never changes; it is set when the structure
 * is created if appropriate and is never cleared.
 */
struct diradd {
        struct  worklist da_list;       /* id_inowait or id_pendinghd list */
#       define  da_state da_list.wk_state /* state of the new directory entry */
        LIST_ENTRY(diradd) da_pdlist;   /* pagedep holding directory block */
        doff_t  da_offset;              /* offset of new dir entry in dir blk */
        ino_t   da_newinum;             /* inode number for the new dir entry */
        union {
        struct  dirrem *dau_previous;   /* entry being replaced in dir change */
        struct  pagedep *dau_pagedep;   /* pagedep dependency for addition */
        } da_un;
        struct workhead da_jwork;       /* Journal work awaiting completion. */
};
#define da_previous da_un.dau_previous
#define da_pagedep da_un.dau_pagedep

/*
 * Two "mkdir" structures are needed to track the additional dependencies
 * associated with creating a new directory entry. Normally a directory
 * addition can be committed as soon as the newly referenced inode has been
 * written to disk with its increased link count. When a directory is
 * created there are two additional dependencies: writing the directory
 * data block containing the "." and ".." entries (MKDIR_BODY) and writing
 * the parent inode with the increased link count for ".." (MKDIR_PARENT).
 * These additional dependencies are tracked by two mkdir structures that
 * reference the associated "diradd" structure. When they have completed,
 * they set the DEPCOMPLETE flag on the diradd so that it knows that its
 * extra dependencies have been completed. The md_state field is used only
 * to identify which type of dependency the mkdir structure is tracking.
 * It is not used in the mainline code for any purpose other than consistency
 * checking. All the mkdir structures in the system are linked together on
 * a list. This list is needed so that a diradd can find its associated
 * mkdir structures and deallocate them if it is prematurely freed (as for
 * example if a mkdir is immediately followed by a rmdir of the same directory).
 * Here, the free of the diradd must traverse the list to find the associated
 * mkdir structures that reference it. The deletion would be faster if the
 * diradd structure were simply augmented to have two pointers that referenced
 * the associated mkdir's. However, this would increase the size of the diradd
 * structure to speed a very infrequent operation.
 */
struct mkdir {
        struct  worklist md_list;       /* id_inowait or buffer holding dir */
#       define  md_state md_list.wk_state /* type: MKDIR_PARENT or MKDIR_BODY */
        struct  diradd *md_diradd;      /* associated diradd */
        struct  jaddref *md_jaddref;    /* dependent jaddref. */
        struct  buf *md_buf;            /* MKDIR_BODY: buffer holding dir */
        LIST_ENTRY(mkdir) md_mkdirs;    /* list of all mkdirs */
};

/*
 * A "dirrem" structure describes an operation to decrement the link
 * count on an inode. The dirrem structure is attached to the pg_dirremhd
 * list of the pagedep for the directory page that contains the entry.
 * It is processed after the directory page with the deleted entry has
 * been written to disk.
 */
struct dirrem {
        struct  worklist dm_list;       /* delayed worklist */
#       define  dm_state dm_list.wk_state /* state of the old directory entry */
        LIST_ENTRY(dirrem) dm_next;     /* pagedep's list of dirrem's */
        LIST_ENTRY(dirrem) dm_inonext;  /* inodedep's list of dirrem's */
        struct  jremrefhd dm_jremrefhd; /* Pending remove reference deps. */
        ino_t   dm_oldinum;             /* inum of the removed dir entry */
        doff_t  dm_offset;              /* offset of removed dir entry in blk */
        union {
        struct  pagedep *dmu_pagedep;   /* pagedep dependency for remove */
        ino_t   dmu_dirinum;            /* parent inode number (for rmdir) */
        } dm_un;
        struct workhead dm_jwork;       /* Journal work awaiting completion. */
};
#define dm_pagedep dm_un.dmu_pagedep
#define dm_dirinum dm_un.dmu_dirinum

/*
 * A "newdirblk" structure tracks the progress of a newly allocated
 * directory block from its creation until it is claimed by its on-disk
 * inode. When a block is allocated to a directory, an fsync of a file
 * whose name is within that block must ensure not only that the block
 * containing the file name has been written, but also that the on-disk
 * inode references that block. When a new directory block is created,
 * we allocate a newdirblk structure which is linked to the associated
 * allocdirect (on its ad_newdirblk list). When the allocdirect has been
 * satisfied, the newdirblk structure is moved to the inodedep id_bufwait
 * list of its directory to await the inode being written. When the inode
 * is written, the directory entries are fully committed and can be
 * deleted from their pagedep->id_pendinghd and inodedep->id_pendinghd
 * lists. Note that we could track directory blocks allocated to indirect
 * blocks using a similar scheme with the allocindir structures. Rather
 * than adding this level of complexity, we simply write those newly 
 * allocated indirect blocks synchronously as such allocations are rare.
 * In the case of a new directory the . and .. links are tracked with
 * a mkdir rather than a pagedep.  In this case we track the mkdir
 * so it can be released when it is written.  A workhead is used
 * to simplify canceling a mkdir that is removed by a subsequent dirrem.
 */
struct newdirblk {
        struct  worklist db_list;       /* id_inowait or pg_newdirblk */
#       define  db_state db_list.wk_state
        struct  pagedep *db_pagedep;    /* associated pagedep */
        struct  workhead db_mkdir;
};

/*
 * The inoref structure holds the elements common to jaddref and jremref
 * so they may easily be queued in-order on the inodedep.
 */
struct inoref {
        struct  worklist if_list;       /* Journal pending or jseg entries. */
#       define  if_state if_list.wk_state
        TAILQ_ENTRY(inoref) if_deps;    /* Links for inodedep. */
        struct  jsegdep *if_jsegdep;    /* Will track our journal record. */
        off_t           if_diroff;      /* Directory offset. */
        ino_t           if_ino;         /* Inode number. */
        ino_t           if_parent;      /* Parent inode number. */
        nlink_t         if_nlink;       /* nlink before addition. */
        uint16_t        if_mode;        /* File mode, needed for IFMT. */
};

/*
 * A "jaddref" structure tracks a new reference (link count) on an inode
 * and prevents the link count increase and bitmap allocation until a
 * journal entry can be written.  Once the journal entry is written,
 * the inode is put on the pendinghd of the bmsafemap and a diradd or
 * mkdir entry is placed on the bufwait list of the inode.  The DEPCOMPLETE
 * flag is used to indicate that all of the required information for writing
 * the journal entry is present.  MKDIR_BODY and MKDIR_PARENT are used to
 * differentiate . and .. links from regular file names.  NEWBLOCK indicates
 * a bitmap is still pending.  If a new reference is canceled by a delete
 * prior to writing the journal the jaddref write is canceled and the
 * structure persists to prevent any disk-visible changes until it is
 * ultimately released when the file is freed or the link is dropped again.
 */
struct jaddref {
        struct  inoref  ja_ref;         /* see inoref above. */
#       define  ja_list ja_ref.if_list  /* Jrnl pending, id_inowait, dm_jwork.*/
#       define  ja_state ja_ref.if_list.wk_state
        LIST_ENTRY(jaddref) ja_bmdeps;  /* Links for bmsafemap. */
        union {
                struct  diradd  *jau_diradd;    /* Pending diradd. */
                struct  mkdir   *jau_mkdir;     /* MKDIR_{PARENT,BODY} */
        } ja_un;
};
#define ja_diradd       ja_un.jau_diradd
#define ja_mkdir        ja_un.jau_mkdir
#define ja_diroff       ja_ref.if_diroff
#define ja_ino          ja_ref.if_ino
#define ja_parent       ja_ref.if_parent
#define ja_mode         ja_ref.if_mode

/*
 * A "jremref" structure tracks a removed reference (unlink) on an
 * inode and prevents the directory remove from proceeding until the
 * journal entry is written.  Once the journal has been written the remove
 * may proceed as normal. 
 */
struct jremref {
        struct  inoref  jr_ref;         /* see inoref above. */
#       define  jr_list jr_ref.if_list  /* Linked to softdep_journal_pending. */
#       define  jr_state jr_ref.if_list.wk_state
        LIST_ENTRY(jremref) jr_deps;    /* Links for dirrem. */
        struct  dirrem  *jr_dirrem;     /* Back pointer to dirrem. */
};

/*
 * A "jmvref" structure tracks a name relocations within the same
 * directory block that occur as a result of directory compaction.
 * It prevents the updated directory entry from being written to disk
 * until the journal entry is written. Once the journal has been
 * written the compacted directory may be written to disk.
 */
struct jmvref {
        struct  worklist jm_list;       /* Linked to softdep_journal_pending. */
        LIST_ENTRY(jmvref) jm_deps;     /* Jmvref on pagedep. */
        struct pagedep  *jm_pagedep;    /* Back pointer to pagedep. */
        ino_t           jm_parent;      /* Containing directory inode number. */
        ino_t           jm_ino;         /* Inode number of our entry. */
        off_t           jm_oldoff;      /* Our old offset in directory. */
        off_t           jm_newoff;      /* Our new offset in directory. */
};

/*
 * A "jnewblk" structure tracks a newly allocated block or fragment and
 * prevents the direct or indirect block pointer as well as the cg bitmap
 * from being written until it is logged.  After it is logged the jsegdep
 * is attached to the allocdirect or allocindir until the operation is
 * completed or reverted.  If the operation is reverted prior to the journal
 * write the jnewblk structure is maintained to prevent the bitmaps from
 * reaching the disk.  Ultimately the jnewblk structure will be passed
 * to the free routine as the in memory cg is modified back to the free
 * state at which time it can be released. It may be held on any of the
 * fx_jwork, fw_jwork, fb_jwork, ff_jwork, nb_jwork, or ir_jwork lists.
 */
struct jnewblk {
        struct  worklist jn_list;       /* See lists above. */
#       define  jn_state jn_list.wk_state
        struct  jsegdep *jn_jsegdep;    /* Will track our journal record. */
        LIST_ENTRY(jnewblk) jn_deps;    /* Jnewblks on sm_jnewblkhd. */
        struct  worklist *jn_dep;       /* Dependency to ref completed seg. */
        ufs_lbn_t       jn_lbn;         /* Lbn to which allocated. */
        ufs2_daddr_t    jn_blkno;       /* Blkno allocated */
        ino_t           jn_ino;         /* Ino to which allocated. */
        int             jn_oldfrags;    /* Previous fragments when extended. */
        int             jn_frags;       /* Number of fragments. */
};

/*
 * A "jblkdep" structure tracks jfreeblk and jtrunc records attached to a
 * freeblks structure.
 */
struct jblkdep {
        struct  worklist jb_list;       /* For softdep journal pending. */
        struct  jsegdep *jb_jsegdep;    /* Reference to the jseg. */
        struct  freeblks *jb_freeblks;  /* Back pointer to freeblks. */
        LIST_ENTRY(jblkdep) jb_deps;    /* Dep list on freeblks. */

};

/*
 * A "jfreeblk" structure tracks the journal write for freeing a block
 * or tree of blocks.  The block pointer must not be cleared in the inode
 * or indirect prior to the jfreeblk being written to the journal.
 */
struct jfreeblk {
        struct  jblkdep jf_dep;         /* freeblks linkage. */
        ufs_lbn_t       jf_lbn;         /* Lbn from which blocks freed. */
        ufs2_daddr_t    jf_blkno;       /* Blkno being freed. */
        ino_t           jf_ino;         /* Ino from which blocks freed. */
        int             jf_frags;       /* Number of frags being freed. */
};

/*
 * A "jfreefrag" tracks the freeing of a single block when a fragment is
 * extended or an indirect page is replaced.  It is not part of a larger
 * freeblks operation.
 */
struct jfreefrag {
        struct  worklist fr_list;       /* Linked to softdep_journal_pending. */
#       define  fr_state fr_list.wk_state
        struct  jsegdep *fr_jsegdep;    /* Will track our journal record. */
        struct freefrag *fr_freefrag;   /* Back pointer to freefrag. */
        ufs_lbn_t       fr_lbn;         /* Lbn from which frag freed. */
        ufs2_daddr_t    fr_blkno;       /* Blkno being freed. */
        ino_t           fr_ino;         /* Ino from which frag freed. */
        int             fr_frags;       /* Size of frag being freed. */
};

/*
 * A "jtrunc" journals the intent to truncate an inode's data or extent area.
 */
struct jtrunc {
        struct  jblkdep jt_dep;         /* freeblks linkage. */
        off_t           jt_size;        /* Final file size. */
        int             jt_extsize;     /* Final extent size. */
        ino_t           jt_ino;         /* Ino being truncated. */
};

/*
 * A "jfsync" journals the completion of an fsync which invalidates earlier
 * jtrunc records in the journal.
 */
struct jfsync {
        struct worklist jfs_list;       /* For softdep journal pending. */
        off_t           jfs_size;       /* Sync file size. */
        int             jfs_extsize;    /* Sync extent size. */
        ino_t           jfs_ino;        /* ino being synced. */
};

/*
 * A "jsegdep" structure tracks a single reference to a written journal
 * segment so the journal space can be reclaimed when all dependencies
 * have been written. It can hang off of id_inowait, dm_jwork, da_jwork,
 * nb_jwork, ff_jwork, or fb_jwork lists.
 */
struct jsegdep {
        struct  worklist jd_list;       /* See above for lists. */
#       define  jd_state jd_list.wk_state
        struct  jseg    *jd_seg;        /* Our journal record. */
};

/*
 * A "jseg" structure contains all of the journal records written in a
 * single disk write.  The jaddref and jremref structures are linked into
 * js_entries so thay may be completed when the write completes.  The
 * js_entries also include the write dependency structures: jmvref,
 * jnewblk, jfreeblk, jfreefrag, and jtrunc.  The js_refs field counts
 * the number of entries on the js_entries list. Thus there is a single
 * jseg entry to describe each journal write.
 */
struct jseg {
        struct  worklist js_list;       /* b_deps link for journal */
#       define  js_state js_list.wk_state
        struct  workhead js_entries;    /* Entries awaiting write */
        LIST_HEAD(, freework) js_indirs;/* List of indirects in this seg. */
        TAILQ_ENTRY(jseg) js_next;      /* List of all unfinished segments. */
        struct  jblocks *js_jblocks;    /* Back pointer to block/seg list */
        struct  buf *js_buf;            /* Buffer while unwritten */
        uint64_t js_seq;                /* Journal record sequence number. */
        uint64_t js_oldseq;             /* Oldest valid sequence number. */
        int     js_size;                /* Size of journal record in bytes. */
        int     js_cnt;                 /* Total items allocated. */
        int     js_refs;                /* Count of js_entries items. */
};

/*
 * A 'sbdep' structure tracks the head of the free inode list and
 * superblock writes.  This makes sure the superblock is always pointing at
 * the first possible unlinked inode for the suj recovery process.  If a
 * block write completes and we discover a new head is available the buf
 * is dirtied and the dep is kept. See the description of the UNLINK*
 * flags above for more details.
 */
struct sbdep {
        struct  worklist sb_list;       /* b_dep linkage */
        struct  fs      *sb_fs;         /* Filesystem pointer within buf. */
        struct  ufsmount *sb_ump;       /* Our mount structure */
};

/*
 * Private journaling structures.
 */
struct jblocks {
        struct jseglst  jb_segs;        /* TAILQ of current segments. */
        struct jseg     *jb_writeseg;   /* Next write to complete. */
        struct jseg     *jb_oldestseg;  /* Oldest segment with valid entries. */
        struct jextent  *jb_extent;     /* Extent array. */
        uint64_t        jb_nextseq;     /* Next sequence number. */
        uint64_t        jb_oldestwrseq; /* Oldest written sequence number. */
        uint8_t         jb_needseg;     /* Need a forced segment. */
        uint8_t         jb_suspended;   /* Did journal suspend writes? */
        int             jb_avail;       /* Available extents. */
        int             jb_used;        /* Last used extent. */
        int             jb_head;        /* Allocator head. */
        int             jb_off;         /* Allocator extent offset. */
        int             jb_blocks;      /* Total disk blocks covered. */
        int             jb_free;        /* Total disk blocks free. */
        int             jb_min;         /* Minimum free space. */
        int             jb_low;         /* Low on space. */
        int             jb_age;         /* Insertion time of oldest rec. */
};

struct jextent {
        ufs2_daddr_t    je_daddr;       /* Disk block address. */
        int             je_blocks;      /* Disk block count. */
};

/*
 * Hash table declarations.
 */
LIST_HEAD(mkdirlist, mkdir);
LIST_HEAD(pagedep_hashhead, pagedep);
LIST_HEAD(inodedep_hashhead, inodedep);
LIST_HEAD(newblk_hashhead, newblk);
LIST_HEAD(bmsafemap_hashhead, bmsafemap);
TAILQ_HEAD(indir_hashhead, freework);

/*
 * Per-filesystem soft dependency data.
 * Allocated at mount and freed at unmount.
 */
struct mount_softdeps {
        struct  rwlock sd_fslock;               /* softdep lock */
        struct  workhead sd_workitem_pending;   /* softdep work queue */
        struct  worklist *sd_worklist_tail;     /* Tail pointer for above */
        struct  workhead sd_journal_pending;    /* journal work queue */
        struct  worklist *sd_journal_tail;      /* Tail pointer for above */
        struct  jblocks *sd_jblocks;            /* Journal block information */
        struct  inodedeplst sd_unlinked;        /* Unlinked inodes */
        struct  bmsafemaphd sd_dirtycg;         /* Dirty CGs */
        struct  mkdirlist sd_mkdirlisthd;       /* Track mkdirs */
        struct  pagedep_hashhead *sd_pdhash;    /* pagedep hash table */
        u_long  sd_pdhashsize;                  /* pagedep hash table size-1 */
        long    sd_pdnextclean;                 /* next hash bucket to clean */
        struct  inodedep_hashhead *sd_idhash;   /* inodedep hash table */
        u_long  sd_idhashsize;                  /* inodedep hash table size-1 */
        long    sd_idnextclean;                 /* next hash bucket to clean */
        struct  newblk_hashhead *sd_newblkhash; /* newblk hash table */
        u_long  sd_newblkhashsize;              /* newblk hash table size-1 */
        struct  bmsafemap_hashhead *sd_bmhash;  /* bmsafemap hash table */
        u_long  sd_bmhashsize;                  /* bmsafemap hash table size-1*/
        struct  indir_hashhead *sd_indirhash;   /* indir hash table */
        u_long  sd_indirhashsize;               /* indir hash table size-1 */
        int     sd_on_journal;                  /* Items on the journal list */
        int     sd_on_worklist;                 /* Items on the worklist */
        int     sd_deps;                        /* Total dependency count */
        int     sd_accdeps;                     /* accumulated dep count */
        int     sd_req;                         /* Wakeup when deps hits 0. */
        int     sd_flags;                       /* comm with flushing thread */
        int     sd_cleanups;                    /* Calls to cleanup */
        struct  thread *sd_flushtd;             /* thread handling flushing */
        TAILQ_ENTRY(mount_softdeps) sd_next;    /* List of softdep filesystem */
        struct  ufsmount *sd_ump;               /* our ufsmount structure */
        u_long  sd_curdeps[D_LAST + 1];         /* count of current deps */
};
/*
 * Flags for communicating with the syncer thread.
 */
#define FLUSH_EXIT      0x0001  /* time to exit */
#define FLUSH_CLEANUP   0x0002  /* need to clear out softdep structures */
#define FLUSH_STARTING  0x0004  /* flush thread not yet started */

/*
 * Keep the old names from when these were in the ufsmount structure.
 */
#define softdep_workitem_pending        um_softdep->sd_workitem_pending
#define softdep_worklist_tail           um_softdep->sd_worklist_tail
#define softdep_journal_pending         um_softdep->sd_journal_pending
#define softdep_journal_tail            um_softdep->sd_journal_tail
#define softdep_jblocks                 um_softdep->sd_jblocks
#define softdep_unlinked                um_softdep->sd_unlinked
#define softdep_dirtycg                 um_softdep->sd_dirtycg
#define softdep_mkdirlisthd             um_softdep->sd_mkdirlisthd
#define pagedep_hashtbl                 um_softdep->sd_pdhash
#define pagedep_hash_size               um_softdep->sd_pdhashsize
#define pagedep_nextclean               um_softdep->sd_pdnextclean
#define inodedep_hashtbl                um_softdep->sd_idhash
#define inodedep_hash_size              um_softdep->sd_idhashsize
#define inodedep_nextclean              um_softdep->sd_idnextclean
#define newblk_hashtbl                  um_softdep->sd_newblkhash
#define newblk_hash_size                um_softdep->sd_newblkhashsize
#define bmsafemap_hashtbl               um_softdep->sd_bmhash
#define bmsafemap_hash_size             um_softdep->sd_bmhashsize
#define indir_hashtbl                   um_softdep->sd_indirhash
#define indir_hash_size                 um_softdep->sd_indirhashsize
#define softdep_on_journal              um_softdep->sd_on_journal
#define softdep_on_worklist             um_softdep->sd_on_worklist
#define softdep_deps                    um_softdep->sd_deps
#define softdep_accdeps                 um_softdep->sd_accdeps
#define softdep_req                     um_softdep->sd_req
#define softdep_flags                   um_softdep->sd_flags
#define softdep_flushtd                 um_softdep->sd_flushtd
#define softdep_curdeps                 um_softdep->sd_curdeps