2 * Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/systm.h>
36 #include <sys/kernel.h>
37 #include <sys/malloc.h>
42 #include <x86/apicreg.h>
43 #include <machine/intr_machdep.h>
44 #include <machine/apicvar.h>
46 #include <contrib/dev/acpica/include/acpi.h>
47 #include <contrib/dev/acpica/include/actables.h>
49 #include <dev/acpica/acpivar.h>
50 #include <dev/pci/pcivar.h>
52 /* These two arrays are indexed by APIC IDs. */
56 } ioapics[MAX_APIC_ID + 1];
61 } lapics[MAX_APIC_ID + 1];
63 static int madt_found_sci_override;
64 static ACPI_TABLE_MADT *madt;
65 static vm_paddr_t madt_physaddr;
66 static vm_offset_t madt_length;
68 MALLOC_DEFINE(M_MADT, "madt_table", "ACPI MADT Table Items");
70 static enum intr_polarity interrupt_polarity(UINT16 IntiFlags, UINT8 Source);
71 static enum intr_trigger interrupt_trigger(UINT16 IntiFlags, UINT8 Source);
72 static int madt_find_cpu(u_int acpi_id, u_int *apic_id);
73 static int madt_find_interrupt(int intr, void **apic, u_int *pin);
74 static void madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg);
75 static void madt_parse_interrupt_override(
76 ACPI_MADT_INTERRUPT_OVERRIDE *intr);
77 static void madt_parse_ints(ACPI_SUBTABLE_HEADER *entry,
79 static void madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi);
80 static void madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi);
81 static int madt_probe(void);
82 static int madt_probe_cpus(void);
83 static void madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry,
85 static void madt_register(void *dummy);
86 static int madt_setup_local(void);
87 static int madt_setup_io(void);
88 static void madt_walk_table(acpi_subtable_handler *handler, void *arg);
90 static struct apic_enumerator madt_enumerator = {
99 * Look for an ACPI Multiple APIC Description Table ("APIC")
105 madt_physaddr = acpi_find_table(ACPI_SIG_MADT);
106 if (madt_physaddr == 0)
112 * Run through the MP table enumerating CPUs.
115 madt_probe_cpus(void)
118 madt = acpi_map_table(madt_physaddr, ACPI_SIG_MADT);
119 madt_length = madt->Header.Length;
120 KASSERT(madt != NULL, ("Unable to re-map MADT"));
121 madt_walk_table(madt_probe_cpus_handler, NULL);
122 acpi_unmap_table(madt);
128 * Initialize the local APIC on the BSP.
131 madt_setup_local(void)
134 madt = pmap_mapbios(madt_physaddr, madt_length);
135 lapic_init(madt->Address);
136 printf("ACPI APIC Table: <%.*s %.*s>\n",
137 (int)sizeof(madt->Header.OemId), madt->Header.OemId,
138 (int)sizeof(madt->Header.OemTableId), madt->Header.OemTableId);
141 * We ignore 64-bit local APIC override entries. Should we
142 * perhaps emit a warning here if we find one?
148 * Enumerate I/O APICs and setup interrupt sources.
157 /* Try to initialize ACPI so that we can access the FADT. */
159 if (ACPI_FAILURE(i)) {
160 printf("MADT: ACPI Startup failed with %s\n",
161 AcpiFormatException(i));
162 printf("Try disabling either ACPI or apic support.\n");
163 panic("Using MADT but ACPI doesn't work");
166 /* First, we run through adding I/O APIC's. */
167 madt_walk_table(madt_parse_apics, NULL);
169 /* Second, we run through the table tweaking interrupt sources. */
170 madt_walk_table(madt_parse_ints, NULL);
173 * If there was not an explicit override entry for the SCI,
174 * force it to use level trigger and active-low polarity.
176 if (!madt_found_sci_override) {
177 if (madt_find_interrupt(AcpiGbl_FADT.SciInterrupt, &ioapic,
179 printf("MADT: Could not find APIC for SCI IRQ %u\n",
180 AcpiGbl_FADT.SciInterrupt);
183 "MADT: Forcing active-low polarity and level trigger for SCI\n");
184 ioapic_set_polarity(ioapic, pin, INTR_POLARITY_LOW);
185 ioapic_set_triggermode(ioapic, pin, INTR_TRIGGER_LEVEL);
189 /* Third, we register all the I/O APIC's. */
190 for (i = 0; i <= MAX_APIC_ID; i++)
191 if (ioapics[i].io_apic != NULL)
192 ioapic_register(ioapics[i].io_apic);
194 /* Finally, we throw the switch to enable the I/O APIC's. */
195 acpi_SetDefaultIntrModel(ACPI_INTR_APIC);
201 madt_register(void *dummy __unused)
204 apic_register_enumerator(&madt_enumerator);
206 SYSINIT(madt_register, SI_SUB_TUNABLES - 1, SI_ORDER_FIRST, madt_register, NULL);
209 * Call the handler routine for each entry in the MADT table.
212 madt_walk_table(acpi_subtable_handler *handler, void *arg)
215 acpi_walk_subtables(madt + 1, (char *)madt + madt->Header.Length,
220 madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry, void *arg)
222 ACPI_MADT_LOCAL_APIC *proc;
223 struct lapic_info *la;
225 switch (entry->Type) {
226 case ACPI_MADT_TYPE_LOCAL_APIC:
228 * The MADT does not include a BSP flag, so we have to
229 * let the MP code figure out which CPU is the BSP on
232 proc = (ACPI_MADT_LOCAL_APIC *)entry;
234 printf("MADT: Found CPU APIC ID %u ACPI ID %u: %s\n",
235 proc->Id, proc->ProcessorId,
236 (proc->LapicFlags & ACPI_MADT_ENABLED) ?
237 "enabled" : "disabled");
238 if (!(proc->LapicFlags & ACPI_MADT_ENABLED))
240 if (proc->Id > MAX_APIC_ID)
241 panic("%s: CPU ID %u too high", __func__, proc->Id);
242 la = &lapics[proc->Id];
243 KASSERT(la->la_enabled == 0,
244 ("Duplicate local APIC ID %u", proc->Id));
246 la->la_acpi_id = proc->ProcessorId;
247 lapic_create(proc->Id, 0);
254 * Add an I/O APIC from an entry in the table.
257 madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg __unused)
259 ACPI_MADT_IO_APIC *apic;
261 switch (entry->Type) {
262 case ACPI_MADT_TYPE_IO_APIC:
263 apic = (ACPI_MADT_IO_APIC *)entry;
266 "MADT: Found IO APIC ID %u, Interrupt %u at %p\n",
267 apic->Id, apic->GlobalIrqBase,
268 (void *)(uintptr_t)apic->Address);
269 if (apic->Id > MAX_APIC_ID)
270 panic("%s: I/O APIC ID %u too high", __func__,
272 if (ioapics[apic->Id].io_apic != NULL)
273 panic("%s: Double APIC ID %u", __func__, apic->Id);
274 if (apic->GlobalIrqBase >= FIRST_MSI_INT) {
275 printf("MADT: Ignoring bogus I/O APIC ID %u", apic->Id);
278 ioapics[apic->Id].io_apic = ioapic_create(apic->Address,
279 apic->Id, apic->GlobalIrqBase);
280 ioapics[apic->Id].io_vector = apic->GlobalIrqBase;
288 * Determine properties of an interrupt source. Note that for ACPI these
289 * functions are only used for ISA interrupts, so we assume ISA bus values
290 * (Active Hi, Edge Triggered) for conforming values except for the ACPI
291 * SCI for which we use Active Lo, Level Triggered.
293 static enum intr_polarity
294 interrupt_polarity(UINT16 IntiFlags, UINT8 Source)
297 switch (IntiFlags & ACPI_MADT_POLARITY_MASK) {
298 case ACPI_MADT_POLARITY_CONFORMS:
299 if (Source == AcpiGbl_FADT.SciInterrupt)
300 return (INTR_POLARITY_LOW);
302 return (INTR_POLARITY_HIGH);
303 case ACPI_MADT_POLARITY_ACTIVE_HIGH:
304 return (INTR_POLARITY_HIGH);
305 case ACPI_MADT_POLARITY_ACTIVE_LOW:
306 return (INTR_POLARITY_LOW);
308 panic("Bogus Interrupt Polarity");
312 static enum intr_trigger
313 interrupt_trigger(UINT16 IntiFlags, UINT8 Source)
316 switch (IntiFlags & ACPI_MADT_TRIGGER_MASK) {
317 case ACPI_MADT_TRIGGER_CONFORMS:
318 if (Source == AcpiGbl_FADT.SciInterrupt)
319 return (INTR_TRIGGER_LEVEL);
321 return (INTR_TRIGGER_EDGE);
322 case ACPI_MADT_TRIGGER_EDGE:
323 return (INTR_TRIGGER_EDGE);
324 case ACPI_MADT_TRIGGER_LEVEL:
325 return (INTR_TRIGGER_LEVEL);
327 panic("Bogus Interrupt Trigger Mode");
332 * Find the local APIC ID associated with a given ACPI Processor ID.
335 madt_find_cpu(u_int acpi_id, u_int *apic_id)
339 for (i = 0; i <= MAX_APIC_ID; i++) {
340 if (!lapics[i].la_enabled)
342 if (lapics[i].la_acpi_id != acpi_id)
351 * Find the IO APIC and pin on that APIC associated with a given global
355 madt_find_interrupt(int intr, void **apic, u_int *pin)
360 for (i = 0; i <= MAX_APIC_ID; i++) {
361 if (ioapics[i].io_apic == NULL ||
362 ioapics[i].io_vector > intr)
365 ioapics[best].io_vector < ioapics[i].io_vector)
370 *apic = ioapics[best].io_apic;
371 *pin = intr - ioapics[best].io_vector;
373 printf("WARNING: Found intpin of %u for vector %d\n", *pin,
379 * Parse an interrupt source override for an ISA interrupt.
382 madt_parse_interrupt_override(ACPI_MADT_INTERRUPT_OVERRIDE *intr)
384 void *new_ioapic, *old_ioapic;
385 u_int new_pin, old_pin;
386 enum intr_trigger trig;
387 enum intr_polarity pol;
390 if (acpi_quirks & ACPI_Q_MADT_IRQ0 && intr->SourceIrq == 0 &&
391 intr->GlobalIrq == 2) {
393 printf("MADT: Skipping timer override\n");
397 printf("MADT: Interrupt override: source %u, irq %u\n",
398 intr->SourceIrq, intr->GlobalIrq);
399 KASSERT(intr->Bus == 0, ("bus for interrupt overrides must be zero"));
400 if (madt_find_interrupt(intr->GlobalIrq, &new_ioapic, &new_pin) != 0) {
401 printf("MADT: Could not find APIC for vector %u (IRQ %u)\n",
402 intr->GlobalIrq, intr->SourceIrq);
407 * Lookup the appropriate trigger and polarity modes for this
410 trig = interrupt_trigger(intr->IntiFlags, intr->SourceIrq);
411 pol = interrupt_polarity(intr->IntiFlags, intr->SourceIrq);
414 * If the SCI is identity mapped but has edge trigger and
415 * active-hi polarity or the force_sci_lo tunable is set,
416 * force it to use level/lo.
418 if (intr->SourceIrq == AcpiGbl_FADT.SciInterrupt) {
419 madt_found_sci_override = 1;
420 if (getenv_string("hw.acpi.sci.trigger", buf, sizeof(buf))) {
421 if (tolower(buf[0]) == 'e')
422 trig = INTR_TRIGGER_EDGE;
423 else if (tolower(buf[0]) == 'l')
424 trig = INTR_TRIGGER_LEVEL;
427 "Invalid trigger %s: must be 'edge' or 'level'",
429 printf("MADT: Forcing SCI to %s trigger\n",
430 trig == INTR_TRIGGER_EDGE ? "edge" : "level");
432 if (getenv_string("hw.acpi.sci.polarity", buf, sizeof(buf))) {
433 if (tolower(buf[0]) == 'h')
434 pol = INTR_POLARITY_HIGH;
435 else if (tolower(buf[0]) == 'l')
436 pol = INTR_POLARITY_LOW;
439 "Invalid polarity %s: must be 'high' or 'low'",
441 printf("MADT: Forcing SCI to active %s polarity\n",
442 pol == INTR_POLARITY_HIGH ? "high" : "low");
446 /* Remap the IRQ if it is mapped to a different interrupt vector. */
447 if (intr->SourceIrq != intr->GlobalIrq) {
449 * If the SCI is remapped to a non-ISA global interrupt,
450 * then override the vector we use to setup and allocate
453 if (intr->GlobalIrq > 15 &&
454 intr->SourceIrq == AcpiGbl_FADT.SciInterrupt)
455 acpi_OverrideInterruptLevel(intr->GlobalIrq);
457 ioapic_remap_vector(new_ioapic, new_pin,
459 if (madt_find_interrupt(intr->SourceIrq, &old_ioapic,
461 printf("MADT: Could not find APIC for source IRQ %u\n",
463 else if (ioapic_get_vector(old_ioapic, old_pin) ==
465 ioapic_disable_pin(old_ioapic, old_pin);
468 /* Program the polarity and trigger mode. */
469 ioapic_set_triggermode(new_ioapic, new_pin, trig);
470 ioapic_set_polarity(new_ioapic, new_pin, pol);
474 * Parse an entry for an NMI routed to an IO APIC.
477 madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi)
482 if (madt_find_interrupt(nmi->GlobalIrq, &ioapic, &pin) != 0) {
483 printf("MADT: Could not find APIC for vector %u\n",
488 ioapic_set_nmi(ioapic, pin);
489 if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
490 ioapic_set_triggermode(ioapic, pin,
491 interrupt_trigger(nmi->IntiFlags, 0));
492 if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
493 ioapic_set_polarity(ioapic, pin,
494 interrupt_polarity(nmi->IntiFlags, 0));
498 * Parse an entry for an NMI routed to a local APIC LVT pin.
501 madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi)
505 if (nmi->ProcessorId == 0xff)
506 apic_id = APIC_ID_ALL;
507 else if (madt_find_cpu(nmi->ProcessorId, &apic_id) != 0) {
509 printf("MADT: Ignoring local NMI routed to "
510 "ACPI CPU %u\n", nmi->ProcessorId);
517 lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_NMI);
518 if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
519 lapic_set_lvt_triggermode(apic_id, pin,
520 interrupt_trigger(nmi->IntiFlags, 0));
521 if (!(nmi->IntiFlags & ACPI_MADT_POLARITY_CONFORMS))
522 lapic_set_lvt_polarity(apic_id, pin,
523 interrupt_polarity(nmi->IntiFlags, 0));
527 * Parse interrupt entries.
530 madt_parse_ints(ACPI_SUBTABLE_HEADER *entry, void *arg __unused)
533 switch (entry->Type) {
534 case ACPI_MADT_TYPE_INTERRUPT_OVERRIDE:
535 madt_parse_interrupt_override(
536 (ACPI_MADT_INTERRUPT_OVERRIDE *)entry);
538 case ACPI_MADT_TYPE_NMI_SOURCE:
539 madt_parse_nmi((ACPI_MADT_NMI_SOURCE *)entry);
541 case ACPI_MADT_TYPE_LOCAL_APIC_NMI:
542 madt_parse_local_nmi((ACPI_MADT_LOCAL_APIC_NMI *)entry);
548 * Setup per-CPU ACPI IDs.
551 madt_set_ids(void *dummy)
553 struct lapic_info *la;
561 KASSERT(pc != NULL, ("no pcpu data for CPU %u", i));
562 la = &lapics[pc->pc_apic_id];
564 panic("APIC: CPU with APIC ID %u is not enabled",
566 pc->pc_acpi_id = la->la_acpi_id;
568 printf("APIC: CPU %u has ACPI ID %u\n", i,
572 SYSINIT(madt_set_ids, SI_SUB_CPU, SI_ORDER_ANY, madt_set_ids, NULL);