2 # Copyright (c) 2016 Spectra Logic Corp
5 # Redistribution and use in source and binary forms, with or without
6 # modification, are permitted provided that the following conditions
8 # 1. Redistributions of source code must retain the above copyright
9 # notice, this list of conditions and the following disclaimer.
10 # 2. Redistributions in binary form must reproduce the above copyright
11 # notice, this list of conditions and the following disclaimer in the
12 # documentation and/or other materials provided with the distribution.
14 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 atf_test_case bad_namespace
29 bad_namespace_head() {
30 atf_set "descr" "Can't set attributes for nonexistent namespaces"
32 bad_namespace_body() {
35 atf_check -s not-exit:0 -e match:"Invalid argument" \
36 setextattr badnamespace myattr X foo
37 atf_check -s not-exit:0 -e match:"Invalid argument" \
38 lsextattr -q badnamespace foo
43 atf_set "descr" "Set and get attribute values in hexadecimal"
48 atf_check -s exit:0 -o empty setextattr user myattr XYZ foo
49 atf_check -s exit:0 -o inline:"58 59 5a\n" \
50 getextattr -qx user myattr foo
53 atf_test_case hex_nonascii
55 atf_set "descr" "Get binary attribute values in hexadecimal"
60 BINSTUFF=`echo $'\x20\x30\x40\x55\x66\x70\x81\xa2\xb3\xee\xff'`
61 atf_check -s exit:0 -o empty setextattr user myattr "$BINSTUFF" foo
62 getextattr user myattr foo
63 atf_check -s exit:0 -o inline:"20 30 40 55 66 70 81 a2 b3 ee ff\n" \
64 getextattr -qx user myattr foo
67 atf_test_case long_name
69 atf_set "descr" "A maximum length attribute name"
74 if ! NAME_MAX=$(getconf NAME_MAX .); then
75 atf_skip "Filesystem not reporting NAME_MAX; skipping testcase"
78 # https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=208965
79 atf_expect_fail "BUG 208965 extattr(2) doesn't allow maxlen attr names"
81 ATTRNAME=`jot -b X -s "" $NAME_MAX 0`
83 atf_check -s exit:0 -o empty setextattr user $ATTRNAME myvalue foo
84 atf_check -s exit:0 -o inline:"${ATTRNAME}\n" lsextattr -q user foo
85 atf_check -s exit:0 -o inline:"myvalue\n" \
86 getextattr -q user ${ATTRNAME} foo
87 atf_check -s exit:0 -o empty rmextattr user ${ATTRNAME} foo
88 atf_check -s exit:0 -o empty lsextattr -q user foo
93 atf_set "descr" "Loud (non -q) output for each command"
98 # setextattr(8) and friends print hard tabs. Use printf to convert
99 # them to spaces before checking the output.
100 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo
101 atf_check -s exit:0 -o inline:"foo myattr" \
102 printf "%s %s" $(lsextattr user foo)
103 atf_check -s exit:0 -o inline:"foo myvalue" \
104 printf "%s %s" $(getextattr user myattr foo)
105 atf_check -s exit:0 -o empty rmextattr user myattr foo
106 atf_check -s exit:0 -o inline:"foo" printf %s $(lsextattr user foo)
109 atf_test_case noattrs
111 atf_set "descr" "A file with no extended attributes"
116 atf_check -s exit:0 -o empty lsextattr -q user foo
119 atf_test_case nonexistent_file
120 nonexistent_file_head() {
121 atf_set "descr" "A file that does not exist"
123 nonexistent_file_body() {
125 atf_check -s exit:1 -e match:"No such file or directory" \
127 atf_check -s exit:1 -e match:"No such file or directory" \
128 setextattr user myattr myvalue foo
129 atf_check -s exit:1 -e match:"No such file or directory" \
130 getextattr user myattr foo
131 atf_check -s exit:1 -e match:"No such file or directory" \
132 rmextattr user myattr foo
137 atf_set "descr" "NUL-terminate an attribute value"
142 atf_check -s exit:0 -o empty setextattr -n user myattr myvalue foo
143 atf_check -s exit:0 -o inline:"myvalue\0\n" getextattr -q user myattr foo
146 atf_test_case one_user_attr
147 one_user_attr_head() {
148 atf_set "descr" "A file with one extended attribute"
150 one_user_attr_body() {
153 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo
154 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q user foo
155 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q user myattr foo
156 atf_check -s exit:0 -o empty rmextattr user myattr foo
157 atf_check -s exit:0 -o empty lsextattr -q user foo
160 atf_test_case one_system_attr
161 one_system_attr_head() {
162 atf_set "descr" "A file with one extended attribute"
163 atf_set "require.user" "root"
165 one_system_attr_body() {
168 atf_check -s exit:0 -o empty setextattr system myattr myvalue foo
169 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q system foo
170 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q system myattr foo
171 atf_check -s exit:0 -o empty rmextattr system myattr foo
172 atf_check -s exit:0 -o empty lsextattr -q system foo
177 atf_set "descr" "Set attribute value from stdin"
181 dd if=/dev/random of=infile bs=1k count=8
183 setextattr -i user myattr foo < infile || atf_fail "setextattr failed"
184 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q user foo
185 getextattr -qq user myattr foo > outfile || atf_fail "getextattr failed"
186 atf_check -s exit:0 cmp -s infile outfile
189 atf_test_case stringify
191 atf_set "descr" "Stringify the output of getextattr"
196 atf_check -s exit:0 -o empty setextattr user myattr "my value" foo
197 atf_check -s exit:0 -o inline:"\"my\\\040value\"\n" \
198 getextattr -qs user myattr foo
201 atf_test_case symlink
203 atf_set "descr" "A symlink to an ordinary file"
209 atf_check -s exit:0 -o empty setextattr user myattr myvalue foolink
210 atf_check -s exit:0 -o inline:"myvalue\n" \
211 getextattr -q user myattr foolink
212 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q user myattr foo
215 atf_test_case symlink_nofollow
216 symlink_nofollow_head() {
217 atf_set "descr" "Operating directly on a symlink"
219 symlink_nofollow_body() {
223 # Check that with -h we can operate directly on the link
224 atf_check -s exit:0 -o empty setextattr -h user myattr myvalue foolink
225 atf_check -s exit:0 -o inline:"myvalue\n" \
226 getextattr -qh user myattr foolink
227 atf_check -s exit:1 -e match:"Attribute not found" \
228 getextattr user myattr foolink
229 atf_check -s exit:1 -e match:"Attribute not found" \
230 getextattr user myattr foo
232 # Check that with -h we cannot operate on the destination file
233 atf_check -s exit:0 -o empty setextattr user otherattr othervalue foo
234 atf_check -s exit:1 getextattr -qh user otherattr foolink
237 atf_test_case system_and_user_attrs
238 system_and_user_attrs_head() {
239 atf_set "descr" "A file with both system and user extended attributes"
240 atf_set "require.user" "root"
242 system_and_user_attrs_body() {
245 atf_check -s exit:0 -o empty setextattr user userattr userval foo
246 atf_check -s exit:0 -o empty setextattr system sysattr sysval foo
247 atf_check -s exit:0 -o inline:"userattr\n" lsextattr -q user foo
248 atf_check -s exit:0 -o inline:"sysattr\n" lsextattr -q system foo
250 atf_check -s exit:0 -o inline:"userval\n" getextattr -q user userattr foo
251 atf_check -s exit:0 -o inline:"sysval\n" getextattr -q system sysattr foo
252 atf_check -s exit:0 -o empty rmextattr user userattr foo
253 atf_check -s exit:0 -o empty rmextattr system sysattr foo
254 atf_check -s exit:0 -o empty lsextattr -q user foo
255 atf_check -s exit:0 -o empty lsextattr -q system foo
258 atf_test_case two_files
260 atf_set "descr" "Manipulate two files"
265 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo bar
266 atf_check -s exit:0 -o inline:"foo\tmyattr\nbar\tmyattr\n" \
267 lsextattr user foo bar
268 atf_check -s exit:0 \
269 -o inline:"foo\tmyvalue\nbar\tmyvalue\n" \
270 getextattr user myattr foo bar
271 atf_check -s exit:0 -o empty rmextattr user myattr foo bar
272 atf_check -s exit:0 -o empty lsextattr -q user foo bar
275 atf_test_case two_files_force
276 two_files_force_head() {
277 atf_set "descr" "Manipulate two files. The first does not exist"
279 two_files_force_body() {
282 atf_check -s exit:1 -e match:"No such file or directory" \
283 setextattr user myattr myvalue foo bar
284 atf_check -s exit:0 -e ignore setextattr -f user myattr myvalue foo bar
285 atf_check -s exit:1 -e match:"No such file or directory" \
286 lsextattr user foo bar
287 atf_check -s exit:0 -e ignore -o inline:"bar\tmyattr\n" \
288 lsextattr -f user foo bar
289 atf_check -s exit:1 -e match:"No such file or directory" \
290 getextattr user myattr foo bar
291 atf_check -s exit:0 -e ignore \
292 -o inline:"bar\tmyvalue\n" \
293 getextattr -f user myattr foo bar
294 atf_check -s exit:1 -e match:"No such file or directory" \
295 rmextattr user myattr foo bar
296 atf_check -s exit:0 -e ignore \
297 rmextattr -f user myattr foo bar
298 atf_check -s exit:0 -o empty lsextattr -q user bar
301 atf_test_case two_user_attrs
302 two_user_attrs_head() {
303 atf_set "descr" "A file with two extended attributes"
305 two_user_attrs_body() {
308 atf_check -s exit:0 -o empty setextattr user myattr1 myvalue1 foo
309 atf_check -s exit:0 -o empty setextattr user myattr2 myvalue2 foo
310 # lsextattr could return the attributes in any order, so we must be
311 # careful how we compare them.
312 raw_output=`lsextattr -q user foo` || atf_fail "lsextattr failed"
313 tabless_output=`printf "%s %s" ${raw_output}`
314 if [ "myattr1 myattr2" != "${tabless_output}" -a \
315 "myattr2 myattr1" != "${tabless_output}" ]; then
316 atf_fail "lsextattr printed ${tabless_output}"
318 atf_check -s exit:0 -o inline:"myvalue1\n" getextattr -q user myattr1 foo
319 atf_check -s exit:0 -o inline:"myvalue2\n" getextattr -q user myattr2 foo
320 atf_check -s exit:0 -o empty rmextattr user myattr2 foo
321 atf_check -s exit:0 -o empty rmextattr user myattr1 foo
322 atf_check -s exit:0 -o empty lsextattr -q user foo
325 atf_test_case unprivileged_user_cannot_set_system_attr
326 unprivileged_user_cannot_set_system_attr_head() {
327 atf_set "descr" "Unprivileged users can't set system attributes"
328 atf_set "require.user" "unprivileged"
330 unprivileged_user_cannot_set_system_attr_body() {
333 atf_check -s exit:1 -e match:"Operation not permitted" \
334 setextattr system myattr myvalue foo
338 atf_init_test_cases() {
339 atf_add_test_case bad_namespace
340 atf_add_test_case hex
341 atf_add_test_case hex_nonascii
342 atf_add_test_case long_name
343 atf_add_test_case loud
344 atf_add_test_case noattrs
345 atf_add_test_case nonexistent_file
346 atf_add_test_case null
347 atf_add_test_case symlink_nofollow
348 atf_add_test_case one_user_attr
349 atf_add_test_case one_system_attr
350 atf_add_test_case stdin
351 atf_add_test_case stringify
352 atf_add_test_case symlink
353 atf_add_test_case symlink_nofollow
354 atf_add_test_case system_and_user_attrs
355 atf_add_test_case two_files
356 atf_add_test_case two_files_force
357 atf_add_test_case two_user_attrs
358 atf_add_test_case unprivileged_user_cannot_set_system_attr
362 case `df -T . | tail -n 1 | cut -wf 2` in
363 "ufs") ;; # UFS is fine
364 "zfs") ;; # ZFS is fine
365 "tmpfs") atf_skip "tmpfs does not support extended attributes";;