1 # This is a sample installation configuration file for my test machine,
3 # It is included here merely as a sort-of-documented example.
7 # Turn on extra debugging.
10 ################################
11 # My host specific data
12 hostname=crate.cdrom.com
14 nameserver=204.216.27.3
15 defaultrouter=204.216.27.228
17 netmask=255.255.255.240
18 ################################
20 # Log to a remote syslogd server
21 syslogdServer=10.0.1.1
23 ################################
24 # Which installation device to use - ftp is pointed directly at my local
25 # machine and the installation device is my WD8013 ethernet interface.
26 # netDev can be set to ANY or a comma-delimited list of interfaces.
27 _ftpPath=ftp://time.cdrom.com/pub
30 ################################
32 ################################
33 # Select which distributions we want.
34 dists=base doc manpages info src sbase ssys kernels GENERIC
36 ################################
38 ################################
39 # Now set the parameters for the partition editor on ad0. Set to use the
40 # disk exclusively (could also be "all" to use the whole disk but
41 # respecting the MBR or "free" to use only unallocated space for FreeBSD).
46 # Uncomment this instead to use only the free space and install boot manager.
50 ################################
52 ################################
55 # All sizes are expressed in 512 byte blocks!
57 # A 512MB root partition
59 # And a 512MB swap partition
60 ad0s1-2=swap 1048576 none
61 # Followed by a /usr partition using all remaining space (size 0 = free space)
62 # and with softupdates enabled (non-zero arg following mountpoint).
67 ################################
69 ################################
70 # Now partition the 2nd disk with a 1GB /var and /usr/src using the
71 # remainder of the disk.
76 ad1s1-1=ufs 2097152 /var
77 ad1s1-2=ufs 0 /usr/src
79 ################################
81 ################################
82 # And the 3rd, adding a second 512MB of swap and the rest of the disk
88 da0s1-1=swap 1048576 none
91 ################################
94 # OK, everything is set. Do it!
97 # Install some packages at the end.