1 # This is a sample installation configuration file for my test machine,
3 # It is included here merely as a sort-of-documented example.
7 # Turn on extra debugging.
10 ################################
11 # My host specific data
12 hostname=crate.cdrom.com
14 nameserver=204.216.27.3
15 defaultrouter=204.216.27.228
17 netmask=255.255.255.240
18 ################################
20 ################################
21 # Which installation device to use - ftp is pointed directly at my local
22 # machine and the installation device is my WD8013 ethernet interface.
23 _ftpPath=ftp://time.cdrom.com/pub
26 ################################
28 ################################
29 # Select which distributions we want.
30 dists=base doc manpages info src sbase ssys kernels GENERIC
32 ################################
34 ################################
35 # Now set the parameters for the partition editor on ad0. Set to use the
36 # disk exclusively (could also be "all" to use the whole disk but
37 # respecting the MBR or "free" to use only unallocated space for FreeBSD).
42 # Uncomment this instead to use only the free space and install boot manager.
46 ################################
48 ################################
51 # All sizes are expressed in 512 byte blocks!
53 # A 512MB root partition
55 # And a 512MB swap partition
56 ad0s1-2=swap 1048576 none
57 # Followed by a /usr partition using all remaining space (size 0 = free space)
58 # and with softupdates enabled (non-zero arg following mountpoint).
63 ################################
65 ################################
66 # Now partition the 2nd disk with a 1GB /var and /usr/src using the
67 # remainder of the disk.
72 ad1s1-1=ufs 2097152 /var
73 ad1s1-2=ufs 0 /usr/src
75 ################################
77 ################################
78 # And the 3rd, adding a second 512MB of swap and the rest of the disk
84 da0s1-1=swap 1048576 none
87 ################################
90 # OK, everything is set. Do it!
93 # Install some packages at the end.