r268640:
Allow multi-byte reads in the private CHELSIO_T4_GET_I2C ioctl. The
firmware allows up to 48B to be read this way but the driver limits
itself to 8B at a time to remain compatible with old cxgbetool
binaries.
MFC r268420:
Remove IO_SYNC flag when writing extended file attributes on ZFS.
While it is possible to create and write file, modify its permissions, etc.
without ever doing sync, it looks odd that it is required for setting
extended file attributes on ZFS. UFS does not do sync there too.
Samba uses those extended attributes to store some its data, and doing it
synchronously by many times reduces file creation performance for systems
without SLOG device.
MFC 267883:
Expand r261243 even further and ignore any I/O port resources assigned to
PCI root bridges except for the one known-valid case on x86 where bridges
claim the I/O port registers used for PCI config space access.
MFC r268642:
libc/gen: small updates to code originating at OpenBSD
arc4random.c
- CVS rev. 1.22
Change arc4random_uniform() to calculate ``2**32 % upper_bound'' as
``-upper_bound % upper_bound''. Simplifies the code and makes it the
same on both ILP32 and LP64 architectures, and also slightly faster on
LP64 architectures by using a 32-bit remainder instead of a 64-bit
remainder.
- CVS rev. 1.23
Spacing
readpassphrase.c
-CVS rev. v 1.24
most obvious unsigned char casts for ctype
Use NULL instead of 0 (Patch by Sascha Wildner <saw at online.de> for Dragonfly)
Remove unnecessary semicolons (Patch by Sascha Wildner <saw at online.de> for Dragonfly)
Add support for arbitrary http requests [1]
Support EAGAIN in fetch_writev
Submitted by: Alex Hornung <alex at alexhornung.com> [1]
Reviewed by: des
MFC r268735:
Improve support for Intel Lynx Point USB 3.0 controllers by using the
USB 2.0 port mask in addition to the USB 3.0 port mask. The hardware
does not always accept when writing -1U to the port switching
registers.
dim [Sat, 19 Jul 2014 18:33:09 +0000 (18:33 +0000)]
MFC r268774:
After r261991, clang warnings about unused functions in the kernel were
completely silenced. Make sure these warnings appear again, so there is
some incentive to fix them, but do not error out the whole kernel build
for them.
Merge r256868,257276-257277,257515,257913 from head. These are fixes
required to make Xen buildable w/o INET. This is the same as r259541
in stable/10 by glebius.
>r263749 | imp | 2014-03-25 16:08:31 -0600 (Tue, 25 Mar 2014) | 18 lines
>Rather than require a makeoptions DEBUG to get debug correct,
>add it in kern.mk, but only if we're using clang. While this
>option is supported by both clang and gcc, in the future there
>may be changes to clang which change the defaults that require
>a tweak to build our kernel such that other tools in our tree
>will work. Set a good example by forcing -gdwarf-2 only for
>clang builds, and only if the user hasn't specified another
>dwarf level already. Update UPDATING to reflect the changed
>state of affairs. This also keeps us from having to update
>all the ARM kernels to add this, and also keeps us from
>in the future having to update all the MIPS kernels and is
>one less place the user will have to know to do something
>special for clang and one less thing developers will need
>to do when moving an architecture to clang.
Note: Due to the funkadellic way we used to do merges, I've made a
direct commit of the relevant text to UPDATING with no merge info
being recorded for it so I could commit it at the same time as the
other files.
tty.c 1.31
handle EINTR in the termios operations
Allow a single process to control multiple ttys (for pthreads using _REENTRANT)
using multiple EditLine objects.
pass lint on _LP64.
Don't depend on side effects inside an assert
MFC r268582:
Fix performance problems with AXGE network adapter in RX direction:
- Remove 4 extra bytes from the ethernet payload.
- The maximum RX buffer was incorrectly set. Increase it to 64K for
now, until the exact limit is understood.
- Enable hardware checksumming again.
- Make hardware data structure packed.
Improve markup, change references to nonexistent vt_vga(4), remove some
language redundancy, and move the examples so sections are in the
standard order.
MFC: r268008
There might be a potential race condition for the NFSv4 client
when a newly created file has another open done on it that
update the open mode. This patch moves the code that updates
the open mode up into the block where the mutex is held to
ensure this cannot happen. No bug caused by this potential
race has been observed, but this fix is a safety belt to ensure
it cannot happen.
Posix strptime() requires support for %t and %n, which were added
to the illumos port. Curiously we were skipping white spaces by
default in most other cases making %t meaningless.
We now skip spaces in the case of the %e specifier as strftime(3)
explicitly adds a space for the single digit case.
hiren [Thu, 10 Jul 2014 21:02:58 +0000 (21:02 +0000)]
MFC r256920
The TCP delayed ACK logic isn't aware of LRO passing up large aggregated
segments thinking it received only one segment. This causes it to enable
the delay the ACK for 100ms to wait for another segment which may never
come because all the data was received already.
Doing delayed ACK for LRO segments is bogus for two reasons: a) it pushes
us further away from acking every other packet; b) it introduces additional
delay in responding to the sender. The latter is especially bad because it
is in the nature of LRO to aggregated all segments of a burst with no more
coming until an ACK is sent back.
Change the delayed ACK logic to detect LRO segments by being larger than
the MSS for this connection and issuing an immediate ACK for them to keep
the ACK clock ticking without interruption.
MFC r266490, r266738, r267955, and r268209:
- Improve performance by fixing incorrect Rx/Tx handling
- Rename definition of AXGE_* to reflect reality
- Add new USB IDs
- Add proper rangechecks in "axge_rx_frame()" function and
fix receive loop header parsing.
- Disable hardware checksumming until it is properly tested.
Initialize r_flags the same way in all cases using a sanitized copy of
flags that has several bits cleared. The RF_WANTED and RF_FIRSTSHARE
bits are invalid in this context, and we want to defer setting RF_ACTIVE
in r_flags until later. This should make rman_get_flags() return
the correct answer in all cases.
Add a KASSERT() to catch callers which incorrectly pass the RF_WANTED
or RF_FIRSTSHARE flags.
Do a strict equality check on the share type bits of flags. In
particular, do an equality check on RF_PREFETCHABLE. The previous
code would allow one type of mismatch of RF_PREFETCHABLE but disallow
the other type of mismatch. Also, ignore the the RF_ALIGNMENT_MASK
bits since alignment validity should be handled by the amask check.
This field contains an integer value, but previous code did a strange
bitwise comparison on it.
Leave the original value of flags unmolested as a minor debug aid.
Change the start+amask overflow check to a KASSERT() since it is just
meant to catch a highly unlikely programming error in the caller.
MFC r267680:
Fix a code typo that prevented mkdir from firing (unnoticed
usually because another part of the code succeeded in making
the same directory).
MFC 266322,266323:
- Use 'RESOURCE' instead of the more generic 'TYPE' for the resource name
column header when displaying resource usage. This more closely matches
other procstat displays.
- Add descriptions of the display formats for -e, -l, -r, and -x. Fix a few
typos in indent settings while here.
dim [Mon, 30 Jun 2014 20:26:30 +0000 (20:26 +0000)]
MFC r267981:
Pull in r211627 from upstream llvm trunk (by Bill Schmidt):
[PPC64] Fix PR20071 (fctiduz generated for targets lacking that
instruction)
PR20071 identifies a problem in PowerPC's fast-isel implementation
for floating-point conversion to integer. The fctiduz instruction
was added in Power ISA 2.06 (i.e., Power7 and later). However, this
instruction is being generated regardless of which 64-bit PowerPC
target is selected.
The intent is for fast-isel to punt to DAG selection when this
instruction is not available. This patch implements that change.
For testing purposes, the existing fast-isel-conversion.ll test adds
a RUN line for -mcpu=970 and tests for the expected code generation.
Additionally, the existing test fast-isel-conversion-p5.ll was found
to be incorrectly expecting the unavailable instruction to be
generated. I've removed these test variants since we have adequate
coverage in fast-isel-conversion.ll.
This is needed to compile clang with debug+asserts on older powerpc64
and ppc970 targets.
pfg [Mon, 30 Jun 2014 14:12:32 +0000 (14:12 +0000)]
MFC r267544:
Update license to strptime(3) implementation.
Our strptime(3) implementation was the base for the illumos
implementation and after contacting the author, Kevin Rudy
stated the code is under a 2-Clause BSD License [1]
After reviewing our local changes to the file in question,
the FreeBSD Foundation has agreed that their contributions
to this file are not required to carry clause 3 or 4 so
the file can be relicensed as in Illumos [2].
marius [Mon, 30 Jun 2014 09:38:09 +0000 (09:38 +0000)]
MFC: r267967, r267968
- SC_NO_SYSMOUSE isn't currently supported by vt(4), so nuke it from vt.4.
- vt_vga(4) is a driver rather than a function so reference it accordingly.
- Uncomment HISTORY section given that vt(4) will first appear in 9.3.
Reviewed by: emaste (modulo last part)
Sponsored by: Bally Wulff Games & Entertainment GmbH
jhb [Fri, 27 Jun 2014 20:39:45 +0000 (20:39 +0000)]
MFC 267291:
Use strcasecmp() instead of strcmp() when checking user-supplied encoding
names so that encoding names are treated as case-insensitive. This allows
the use of 'utf-8' instead of 'UTF-8' for example and matches the behavior
of iconv(1).
jhb [Fri, 27 Jun 2014 20:34:22 +0000 (20:34 +0000)]
MFC 266293:
- Add support for dumping current resource usage for processes via a new -r
flag to procstat.
- Add an -H flag to request information about threads rather than processes
when dumping statistics. Currently it is only used for -r to display
resource usage for individual threads instead of the entire process.
jhb [Fri, 27 Jun 2014 17:22:18 +0000 (17:22 +0000)]
MFC 261781:
Don't waste a page of KVA for the boot-time memory test on x86. For amd64,
reuse the first page of the crashdumpmap as CMAP1/CADDR1. For i386,
remove CMAP1/CADDR1 entirely and reuse CMAP3/CADDR3 for the memory test.
delphij [Fri, 27 Jun 2014 00:37:03 +0000 (00:37 +0000)]
MFC r258941,267839:
Apply vendor improvements to oce(4) driver:
- Add support to 20Gbps, 25Gbps, 40Gbps devices;
- Add support to control adaptive interrupt coalescing (AIC)
via sysctl;
- Improve support of BE3 devices;
- Big endian support fixes;
Many thanks to Emulex for their continued support of FreeBSD.
gjb [Wed, 25 Jun 2014 19:00:11 +0000 (19:00 +0000)]
MFC r267693:
Fix a bug in bsdgrep(1) where patterns are not correctly
detected.
Certain criteria must be met for this bug to show up:
* the -w flag is specified, and
* neither -o or --color are specified, and
* the pattern is part of another word in the line, and
* the other word that contains the pattern occurs first
ume [Wed, 25 Jun 2014 17:34:04 +0000 (17:34 +0000)]
MFC r267616:
Retooling addrconfig() to exclude addresses on loopback interfaces
when looking for configured addresses.
This change is based upon the code from the submitter, and made
following changes:
- Exclude addresses assigned on interfaces which are down, like NetBSD
does.
- Exclude addresses assigned on interfaces which are ifdisabled.
jhb [Tue, 24 Jun 2014 19:58:18 +0000 (19:58 +0000)]
MFC 253392:
Workaround some broken BIOSes that specify edge-sensitive but active-low
settings for ACPI-enumerated serial ports by forcing any IRQs that use
an ISA IRQ value with these settings to active-high instead of active-low.
This is known to occur with the BIOS on an Intel D2500CCE motherboard.