dim [Sat, 4 Jan 2014 18:53:31 +0000 (18:53 +0000)]
MFC r260040:
In sys/dev/mcd/mcd.c, mark the static const COPYRIGHT string as __used,
so it ends up in the object file, and no warnings are emitted about it
being actually unused.
dim [Sat, 4 Jan 2014 17:56:19 +0000 (17:56 +0000)]
MFC r260102:
Similar to r260020, only use -fms-extensions with gcc, for all other
modules which require this flag to compile. Use a GCC_MS_EXTENSIONS
variable, defined in kern.pre.mk, which can be used to easily supply the
flag (or not), depending on the compiler type.
dim [Sat, 4 Jan 2014 17:22:53 +0000 (17:22 +0000)]
MFC r260015:
In libc++'s type_traits header, avoid warnings (activated by our use of
-Wsystem-headers) about potential keyword compatibility problems, by
adding a __libcpp prefix to the applicable identifiers.
Upstream is still debating about this, but we need it now, to be able to
import clang 3.4.
jilles [Fri, 3 Jan 2014 14:30:24 +0000 (14:30 +0000)]
MFC r258281: Fix siginfo_t.si_status for wait6/waitid/SIGCHLD.
Per POSIX, si_status should contain the value passed to exit() for
si_code==CLD_EXITED and the signal number for other si_code. This was
incorrect for CLD_EXITED and CLD_DUMPED.
This is still not fully POSIX-compliant (Austin group issue #594 says that
the full value passed to exit() shall be returned via si_status, not just
the low 8 bits) but is sufficient for a si_status-related test in libnih
(upstart, Debian/kFreeBSD).
jhb [Thu, 2 Jan 2014 21:57:03 +0000 (21:57 +0000)]
MFC 255708,255711,255731:
Extend the support for exempting processes from being killed when swap is
exhausted.
- Add a new protect(1) command that can be used to set or revoke protection
from arbitrary processes. Similar to ktrace it can apply a change to all
existing descendants of a process as well as future descendants.
- Add a new procctl(2) system call that provides a generic interface for
control operations on processes (as opposed to the debugger-specific
operations provided by ptrace(2)). procctl(2) uses a combination of
idtype_t and an id to identify the set of processes on which to operate
similar to wait6().
- Add a PROC_SPROTECT control operation to manage the protection status
of a set of processes. MADV_PROTECT still works for backwards
compatability.
- Add a p_flag2 to struct proc (and a corresponding ki_flag2 to kinfo_proc)
the first bit of which is used to track if P_PROTECT should be inherited
by new child processes.
pluknet [Thu, 2 Jan 2014 16:39:11 +0000 (16:39 +0000)]
MFC r259872:
The compile time constant limit on number of swap devices was removed in 5.2.
As such, remove the EINVAL error saying so. Currently the vm.nswapdev sysctl
just represents the number of added swap devices.
rmacklem [Wed, 1 Jan 2014 22:49:37 +0000 (22:49 +0000)]
MFC: r259854
The NFSv4 server would call VOP_SETATTR() with a shared locked vnode
when a Getattr for a file is done by a client other than the one that
holds the file's delegation. This would only happen when delegations
are enabled and the problem is fixed by this patch.
rmacklem [Wed, 1 Jan 2014 22:43:16 +0000 (22:43 +0000)]
MFC: r259845
An intermittent problem with NFSv4 exporting of ZFS snapshots was
reported to the freebsd-fs mailing list. I believe the problem was
caused by the Readdir operation using VFS_VGET() for a snapshot file entry
instead of VOP_LOOKUP(). This would not occur for NFSv3, since it
will do a VFS_VGET() of "." which fails with ENOTSUPP at the beginning
of the directory, whereas NFSv4 does not check "." or "..". This
patch adds a call to VFS_VGET() for the directory being read to check
for ENOTSUPP.
I also observed that the mount_on_fileid and fsid attributes were
not correct at the snapshot's auto mountpoints when looking at packet
traces for the Readdir. This patch fixes the attributes by doing a check
for different v_mount structure, even if the vnode v_mountedhere is not
set.
rmacklem [Wed, 1 Jan 2014 22:35:11 +0000 (22:35 +0000)]
MFC: r259801
The NFSv4 client was passing both the p and cred arguments to
nfsv4_fillattr() as NULLs for the Getattr callback. This caused
nfsv4_fillattr() to not fill in the Change attribute for the reply.
I believe this was a violation of the RFC, but had little effect on
server behaviour. This patch passes a non-NULL p argument to fix this.
rmacklem [Wed, 1 Jan 2014 22:14:49 +0000 (22:14 +0000)]
MFC: r259084
For software builds, the NFS client does many small
synchronous (with FILE_SYNC) writes because non-contiguous
byte ranges in the same buffer cache block are being
written. This patch adds a new mount option "noncontigwr"
which allows the non-contiguous byte ranges to be combined,
with the dirty byte range becoming the superset of the bytes
that are dirty, if the file has not been file locked.
This reduces the number of writes significantly for software
builds. The only case where this change might break existing
applications is where an application is writing
non-overlapping byte ranges within the same buffer cache block
of a file from multiple clients concurrently.
Since such an application would normally do file locking on
the file, avoiding the byte range merge for files that have
been file locked should be sufficient for most (maybe all?) cases.
kevlo [Tue, 31 Dec 2013 16:01:17 +0000 (16:01 +0000)]
MFC r252064:
Rename run(4) firmware file from runfw to run.fw. Previous name was the
same as top-level target name for "device runfw" kernel option and
caused cyclic dependancy that lead to kernel build breakage
Module change is not strictly required and done for name unification sake
PR: conf/175751
Submitted by: Issei <i10a at herbmint.jp>
dim [Mon, 30 Dec 2013 20:27:58 +0000 (20:27 +0000)]
MFC r259902:
In sys/dev/drm/mach64_dma.c, remove static function mach64_set_dma_eol(),
which has never been used, even by upstream, since its initial upstream
commit (see http://cgit.freedesktop.org/mesa/drm/commit/?id=873e1c4d )
dim [Mon, 30 Dec 2013 20:15:46 +0000 (20:15 +0000)]
MFC r257532 (by adrian):
Fix this build for clang.
MFC r259730:
To avoid having to explicitly test COMPILER_TYPE for setting
clang-specific or gcc-specific flags, introduce the following new
variables for use in Makefiles:
mckusick [Sun, 29 Dec 2013 07:29:45 +0000 (07:29 +0000)]
MFC of 258789:
We needlessly panic when trying to flush MKDIR_PARENT dependencies.
We had previously tried to flush all MKDIR_PARENT dependencies (and
all the NEWBLOCK pagedeps) by calling ffs_update(). However this will
only resolve these dependencies in direct blocks. So very large
directories with MKDIR_PARENT dependencies in indirect blocks had
not yet gotten flushed. As the directory is in the midst of doing a
complete sync, we simply defer the checking of the MKDIR_PARENT
dependencies until the indirect blocks have been sync'ed.
Make hastctl list command output current queue sizes.
Reviewed by: pjd
r257582 (pjd):
Correct alignment.
r259191:
For memsync replication, hio_countdown is used not only as an
indication when a request can be moved to done queue, but also for
detecting the current state of memsync request.
This approach has problems, e.g. leaking a request if memsynk ack from
the secondary failed, or racy usage of write_complete, which should be
called only once per write request, but for memsync can be entered by
local_send_thread and ggate_send_thread simultaneously.
So the following approach is implemented instead:
1) Use hio_countdown only for counting components we waiting to
complete, i.e. initially it is always 2 for any replication mode.
2) To distinguish between "memsync ack" and "memsync fin" responses
from the secondary, add and use hio_memsyncacked field.
3) write_complete() in component threads is called only before
releasing hio_countdown (i.e. before the hio may be returned to the
done queue).
4) Add and use hio_writecount refcounter to detect when
write_complete() can be called in memsync case.
Reported by: Pete French petefrench ingresso.co.uk
Tested by: Pete French petefrench ingresso.co.uk
r259192:
Add some macros to make the code more readable (no functional chages).
r259193:
Fix compiler warnings.
r259194:
In remote_send_thread, if sending a request fails don't take the
request back from the receive queue -- it might already be processed
by remote_recv_thread, which lead to crashes like below:
(primary) Unable to receive reply header: Connection reset by peer.
(primary) Unable to send request (Connection reset by peer):
WRITE(954662912, 131072).
(primary) Disconnected from kopusha:7772.
(primary) Increasing localcnt to 1.
(primary) Assertion failed: (old > 0), function refcnt_release,
file refcnt.h, line 62.
Taking the request back was not necessary (it would properly be
processed by the remote_recv_thread) and only complicated things.
r259195:
Send wakeup to threads waiting on empty queue before releasing the
lock to decrease spurious wakeups.
Submitted by: davidxu
r259196:
Check remote protocol version only for the first connection (when it
is actually sent by the remote node).
Otherwise it generated confusing "Negotiated protocol version 1" debug
messages when processing the second connection.
dim [Sat, 28 Dec 2013 02:15:30 +0000 (02:15 +0000)]
MFC r259897:
In sys/dev/cxgb/ulp/tom/cxgb_cpl_io.c, remove static functions
mk_cpl_barrier_ulp(), mk_get_tcb_ulp() and mk_set_tcb_field_ulp(), which
are all unused since r237263.
dim [Sat, 28 Dec 2013 01:26:26 +0000 (01:26 +0000)]
MFC r259842:
Remove some unused static const strings under sys/rpc, which have never
been used since the initial commit (r177633).
MFC r259843:
Move a static const variable to the #if 0 part where it is only used.
(Note the #if 0 part has been inactive since the initial commit,
r177633, so maybe it should be removed altogether).
dim [Sat, 28 Dec 2013 01:19:48 +0000 (01:19 +0000)]
MFC r259840:
In sys/netinet6/in6_mcast.c, in6m_is_ifp_detached() is only used
whenever KTR is defined, so put it between #ifdef KTR guards. This
avoids a warning about a unused function if KTR is not enabled.
dim [Sat, 28 Dec 2013 01:15:34 +0000 (01:15 +0000)]
MFC r259839:
In sys/netinet/in_mcast.c, inm_is_ifp_detached() is only used whenever
KTR is defined, so put it between #ifdef KTR guards. This avoids a
warning about a unused function if KTR is not enabled.
markj [Fri, 27 Dec 2013 22:59:16 +0000 (22:59 +0000)]
MFC r258000:
Consistently add the relocation offset only when the ELF type is not
ET_EXEC. This fixes several problems with the DTrace pid provider not
being able to match probes.
markj [Fri, 27 Dec 2013 22:54:38 +0000 (22:54 +0000)]
MFC r240040 (rpaulo):
Make sure we visit both symbol sections even if one of them doesn't
exist. This makes it possible to dtrace some C++ programs like devd.
MFC r254177 (rpaulo):
Fix the return value when we found a symbol in .dynstr. This nasty bug was
preventing a lot of symbol lookups in dtruss -s, for example.
markj [Fri, 27 Dec 2013 22:29:20 +0000 (22:29 +0000)]
MFC r257670:
Modify the libproc breakpoint add/remove functions to stop the target
process if it has not already been stopped, since this is required for
ptrace(2) to work.
libdtrace does not seem to stop target processes before trying to remove
their breakpoints, so we were previously failing to remove the breakpoint
on r_debug_state() in rtld. This was causing processes to die with SIGTRAP
if they called dlopen(3) after dtrace(1) had detached.
markj [Wed, 25 Dec 2013 22:32:52 +0000 (22:32 +0000)]
MFC r256661 r257222 r257235 r257248 r257298.
MFC r256661:
Fix the libproc build when DEBUG is defined.
MFC r257222:
Clean up the debug printing in libproc a bit. In particular:
* Don't print any error messages to stderr unless DEBUG is defined.
* Add a DPRINTFX macro for use when errno isn't set.
* Print the error string from libelf when appropriate.
MFC r257235:
Remove an incorrect debug printf.
MFC r257248:
Fix the build with gcc.
MFC r257298:
Revert r257248 and fix the problem in a way that doesn't violate style(9).
gjb [Wed, 25 Dec 2013 06:09:31 +0000 (06:09 +0000)]
MFC r259729:
Bootstrap etcupdate(8) as part of the release build, similar
to what is done for mergemaster(8). This allows etcupdate(8)
to work out-of-box after the first upgrade of a system.
jhb [Tue, 24 Dec 2013 19:02:04 +0000 (19:02 +0000)]
MFC 258869:
Fix an off-by-one error in r228960. The maximum priority delta provided
by SCHED_PRI_TICKS should be SCHED_PRI_RANGE - 1 so that the resulting
priority value (before nice adjustment) is between SCHED_PRI_MIN and
SCHED_PRI_MAX, inclusive.
jhb [Tue, 24 Dec 2013 18:41:17 +0000 (18:41 +0000)]
MFC 255493:
- Decode the idtype argument passed to wait6() in kdump and truss.
- Don't treat an options argument of 0 to wait4() as an error in
kdump.
- Decode the wait options passed to wait4() and wait6() in truss
and decode the returned rusage and exit status.
jilles [Mon, 23 Dec 2013 22:38:41 +0000 (22:38 +0000)]
MFC r256060,r256650: kldxref: Do not depend on the directory order.
Sort the filenames to get a consistent result between machines of the same
architecture.
Also, sort FTS_D entries after other entries so kldxref -R works properly in
the uncommon case that a directory contains both subdirectories and modules.
Previously, this may have happened to work, depending on the order of files
in the directory.
imp [Sun, 22 Dec 2013 23:33:27 +0000 (23:33 +0000)]
Direct Commit of mountroot> prompt fix r259748 (since there's no sane
branching relationship between that branch and this one and since the
more general fix in head may be too risky for a stbale branch this
mature):
Fix mountroot> prompt eating most of the characters by not enabling
RXRDY interrupts in the attach routine. Instead, defer this until the
first interrupt we see after the device is opened. Given the console
use case, we're guaranteed to get a TXRDY interrupt before any reads
are posted due to boot messages, which makes this work.
The real fix is to use cngrab/cnungrab function pointers to disable
RXRDY interrupts while grabbed. However, that touches the MI uart
code, so was disallowed for 10.0 due to the lateness of the hour this
fix was proposed. It works for mountroot, the most common atmel kernel
prompt use cases, but wouldn't work for GELI since it prompts later in
the boot process.
mav [Sun, 22 Dec 2013 13:03:33 +0000 (13:03 +0000)]
MFC r259108:
When comparing device IDs, make sure that they have the same type
(like NAA assigned) and identify the same entity (like device or port).
Otherwise there can be false positives since at least some models of
Seagate disks use same IDs for the whole device and one of its ports.
imp [Thu, 19 Dec 2013 18:06:52 +0000 (18:06 +0000)]
Improve compatibility with earlier parts of the 9 branch by defaulting
to MK_CLANG_IS_CC is no when it isn't otherwise defined. Also,
bsd.compiler.mk wasn't present in 9.0, so don't require it. With these
changes, you can compile a tip of 9.x kernel and modules old-school on
a 9.0 system.
# Direct commit since this isn't relevant to 10 or current.
pluknet [Thu, 19 Dec 2013 17:29:56 +0000 (17:29 +0000)]
MFC r255194 and prerequisites r229494,229496:
Introduce internal macros for __U/INT64_C to define the U/INT64_MAX/MIN
values properly. The previous definition only worked if __STDC_LIMIT_MACROS
and __STDC_CONSTANT_MACROS were defined at the same time.
Newer versions of gcc define __INT64_C and __UINT64_C, so avoid
redefining them if gcc provides them.
Applying r255194 fixes stable/9 host to allow source upgrading to the newer
versions with usr.bin/dtc included in bootstrap tools.
hselasky [Thu, 19 Dec 2013 07:18:31 +0000 (07:18 +0000)]
MFC r259248 and r259462:
Set chain bit correctly. This will fix some problems sending and
receiving Zero Length Packets, ZLPs. See comment in code for more
information.
truckman [Thu, 19 Dec 2013 07:17:07 +0000 (07:17 +0000)]
MFC r258629, 258662:
r258629:
Mention that devd will kldload the driver when the device is connected.
Mention that the automatic mode switch from umass to u3g needed by some
devices does not work unless the driver is loaded before the device is
connected.
r254224:
Update the wrapper script to 'release.sh', as used by the
FreeBSD Release Engineering Team as of 9.2-RELEASE.
Document that a cross-build release is possible by setting
the TARGET and TARGET_ARCH variables.
Include an example of using release.sh with and without the
optional configuration file.
Document the supported release.sh configuration file variables.
Update the 'cdrom' target output file to disc1.iso.
Update the 'memstick' target output file to memstick.img.
Add attributions for the last major updates to this manual page.
Fix some mdoc(7) style nits.
r254294:
Remove the defaults for TARGET/TARGET_ARCH.
Note that WORLD_FLAGS and KERNEL_FLAGS set the number of
make(1) jobs only on SMP-capable systems.
r254328:
Remove the {SRC,DOC,PORT}REVISION variables from release(7), and
update the default {SRC,DOC,PORT}BRANCH defaults.
r258307:
Add a script and configuration files to fetch pre-built packages
from pkg.FreeBSD.org for inclusion on release medium (dvd1.iso).
The script sources ${.CURDIR}/${TARGET}/pkg-stage.conf, which sets
several environment variables, such as the pkg(8) ABI, PACKAGESITE,
PKG_DBDIR, and PKG_CACHEDIR. PKG_CACHEDIR is set to the directory
on the release medium used by bsdconfig(8) (/packages/${ABI}). ABI
is determined by output of 'make -C /usr/src/release -V REVISION'.
See pkg.conf(5) for descripton on other variables set here.
The list of packages to include are set within the configuration
file.
The script and configuration files are intended to be run by the
'make dvd' target within the release directory, and assume the
release is built within a chroot environment (such as by using
release.sh).
r258309:
Set the PKG_CACHEDIR directory to 'dvd/' instead of 'release/'
in preparation of adding a 'dvd1.iso' target.
r258310:
Add the 'dvd1.iso' target. This mimics the 'release.iso' target,
with the additional step of fetching packages for inclusion on the
dvd image.
The 'pkg-stage' target is used to run 'scripts/pkg-stage.sh' if
the '${TARGET}/pkg-stage.conf' configuration file exists (currently
only amd64 and i386).
Allow dvd1.iso to be skipped if NODVD=1.
r258314:
Fix how ABI is evaluated so it matches more than a dot-zero
case.
r258317:
Document the 'dvdrom' target.
r258319:
Remove WITHOUT_PROFILE=1 for the dvd1.iso medium.
r258320:
Simplify PKG_ABI for pkg-stage.sh.
r258669:
Document the dvdrom target and NODVD variable.
r258786:
Move OPTIONS_UNSET outside of the PBUILD_FLAGS variable, otherwise
the textproc/docproj port build fails.
r258853:
Turn off the dvdrom target by default. dvd1.iso is now built by
specifying 'WITH_DVD=1' during 'make release'.
r258949:
Ensure WITH_DVD is not empty to prevent 'WITH_DVD= ' from evaluating
to true.
r259079:
Add WITH_DVD to RELEASE_RMAKEFLAGS, otherwise it is not actually
passed to 'make release'.
r259246:
Prevent release build errors found during snapshot builds where if
NOPORTS=1, pkg-stage.sh cannot build the ports-mgmt/pkg port if
WITH_DVD=1.
Tested against: stable/9@r259512
Sponsored by: The FreeBSD Foundation
asomers [Tue, 17 Dec 2013 16:10:59 +0000 (16:10 +0000)]
MFC r258311
opensolaris/uts/common/dtrace/fasttrap.c
Fix several problems that can cause panics on kldload and kldunload.
* kproc_create(fasttrap_pid_cleanup_cb, ...) gets called before
fasttrap_provs.fth_table gets allocated. This can lead to a panic
on module load, because fasttrap_pid_cleanup_cb references
fasttrap_provs.fth_table. Move kproc_create down after the point
that fasttrap_provs.fth_table gets allocated, and modify the error
handling accordingly.
* dtrace_fasttrap_{fork,exec,exit} weren't getting NULLed until
after fasttrap_provs.fth_table got freed. That caused panics on
module unload because fasttrap_exec_exit calls
fasttrap_provider_retire, which references
fasttrap_provs.fth_table. NULL those function pointers earlier.
* There wasn't any code to destroy the
fasttrap_{tpoints,provs,procs}.fth_table mutexes on module unload,
leading to a resource leak when WITNESS is enabled. Destroy those
mutexes during fasttrap_unload().
nwhitehorn [Mon, 16 Dec 2013 15:02:10 +0000 (15:02 +0000)]
MFC r258819,258928:
Add new sysctl, kern.supported_archs, containing the list of FreeBSD
MACHINE_ARCH values whose binaries this kernel can run. This patch provides
a feature requested for implementing pkgng ABI identifiers in a robust
way.
The list is designed to indicate whether, say, an i386 package can be run on
the current system. If kern.supported_abis contains "i386", then the answer
is yes. Otherwise, the answer is no.
At the moment, this only supports MACHINE_ARCH and MACHINE_ARCH32. As we
gain support for more interesting combinations, this needs to become more
flexible, possibily through the sysent framework, along with the
hw.machine_arch emulation immediately preceding this code in kern_mib.c.
projects / FreeBSD / stable / 9.git / log